build_configdirs=`echo ${build_libs} ${build_tools}`
m4_divert_text([PARSE_ARGS],
-[ac_subdirs_all=`cd $srcdir && echo */configure | sed 's,/configure,,g'`
+[case $srcdir in
+ *" "*)
+m4_pushdef([AS_MESSAGE_LOG_FD], [])dnl
+ AC_MSG_ERROR([path to source, $srcdir, contains spaces])
+m4_popdef([AS_MESSAGE_LOG_FD])dnl
+ ;;
+esac
+ac_subdirs_all=`cd $srcdir && echo */configure | sed 's,/configure,,g'`
])
################################################################################
configdirs="$configdirs gold"
;;
*)
- configdirs="`echo " ${configdirs} " | sed -e 's/ ld / gold /'`"
+ configdirs=`echo " ${configdirs} " | sed -e 's/ ld / gold /'`
;;
esac
ENABLE_GOLD=yes
noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
;;
microblaze*)
- noconfigdirs="$noconfigdirs gprof ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libssp ${libgcj}"
;;
mips*-sde-elf*)
skipdirs="$skipdirs target-libiberty"
v810-*-*)
noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
;;
- v850-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- v850e-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
- ;;
- v850ea-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ v850*-*-*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
;;
vax-*-vms)
noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}"
tentative_cc="/usr/cygnus/progressive/bin/gcc"
host_makefile_frag="config/mh-lynxrs6k"
;;
- powerpc-*-darwin*)
- host_makefile_frag="config/mh-ppc-darwin"
+ *-*-darwin*)
+ host_makefile_frag="config/mh-darwin"
;;
powerpc-*-aix*)
host_makefile_frag="config/mh-ppc-aix"
if test "x$with_gmp$with_gmp_include$with_gmp_lib" = x && test -d ${srcdir}/gmp; then
gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir $gmplibs"
gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp '"$gmpinc"
- extra_mpfr_configure_flags='--with-gmp-build=$$r/$(HOST_SUBDIR)/gmp'
+ extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir"
extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir"
# Do not test the gmp version. Assume that it is sufficient, since
# it is in the source tree, and the library has not been built yet
enable_lto=$enableval,
enable_lto=yes; default_enable_lto=yes)
-
-ACX_ELF_TARGET_IFELSE([if test x"$enable_lto" = x"yes" ; then
- # Make sure that libelf.h and gelf.h are available.
- AC_ARG_WITH(libelf, [ --with-libelf=PATH Specify prefix directory for the installed libelf package
- Equivalent to --with-libelf-include=PATH/include
- plus --with-libelf-lib=PATH/lib])
-
- AC_ARG_WITH(libelf_include, [ --with-libelf-include=PATH Specify directory for installed libelf include files])
-
- AC_ARG_WITH(libelf_lib, [ --with-libelf-lib=PATH Specify the directory for the installed libelf library])
-
- saved_CFLAGS="$CFLAGS"
- saved_CPPFLAGS="$CPPFLAGS"
- saved_LIBS="$LIBS"
-
- case $with_libelf in
- "")
- libelflibs="-lelf"
- libelfinc="-I/usr/include/libelf"
- ;;
- *)
- libelflibs="-L$with_libelf/lib -lelf"
- libelfinc="-I$with_libelf/include -I$with_libelf/include/libelf"
- LIBS="$libelflibs $LIBS"
- ;;
- esac
-
- if test "x$with_libelf_include" != x; then
- libelfinc="-I$with_libelf_include"
- fi
-
- if test "x$with_libelf_lib" != x; then
- libelflibs="-L$with_libelf_lib -lelf"
- LIBS="$libelflibs $LIBS"
- fi
-
- if test "x$with_libelf$with_libelf_include$with_libelf_lib" = x \
- && test -d ${srcdir}/libelf; then
- libelflibs='-L$$r/$(HOST_SUBDIR)/libelf/lib -lelf '
- libelfinc='-D__LIBELF_INTERNAL__ -I$$r/$(HOST_SUBDIR)/libelf/lib -I$$s/libelf/lib'
- LIBS="$libelflibs $LIBS"
-
- else
-
- CFLAGS="$CFLAGS $libelfinc"
- CPPFLAGS="$CPPFLAGS $libelfinc"
- LIBS="$LIBS $libelflibs"
-
- AC_CHECK_HEADERS(libelf.h, [have_libelf_h=yes])
- AC_CHECK_HEADERS(gelf.h, [have_gelf_h=yes])
-
- AC_CHECK_HEADERS(libelf/libelf.h, [have_libelf_libelf_h=yes])
- AC_CHECK_HEADERS(libelf/gelf.h, [have_libelf_gelf_h=yes])
-
- # If we couldn't find libelf.h and the user forced it, emit an error.
- if test x"$have_libelf_h" != x"yes" \
- && test x"$have_libelf_libelf_h" != x"yes" ; then
- if test x"$default_enable_lto" != x"yes" ; then
- AC_MSG_ERROR([LTO support requires libelf.h or libelf/libelf.h.])
- else
- enable_lto=no
- libelflibs=
- libelfinc=
- fi
- fi
-
- # If we couldn't find gelf.h and the user forced it, emit an error.
- if test x"$have_gelf_h" != x"yes" \
- && test x"$have_libelf_gelf_h" != x"yes" ; then
- if test x"$default_enable_lto" != x"yes" ; then
- AC_MSG_ERROR([LTO support requires gelf.h or libelf/gelf.h.])
- else
- enable_lto=no
- libelflibs=
- libelfinc=
- fi
- fi
-
- # Check that the detected libelf has the functions we need. We cannot
- # rely on just detecting the headers since they do not include
- # versioning information. Add functions, if needed.
- if test x"$enable_lto" = x"yes" ; then
- AC_MSG_CHECKING([for the correct version of libelf])
- AC_TRY_LINK(
- [#include <libelf.h>],[
- elf_errmsg (0);
- elf_getscn (0, 0);
- elf_nextscn (0, 0);
- elf_strptr (0, 0, 0);
- elf_getident (0, 0);
- elf_begin (0, 0, 0);
- elf_ndxscn (0);
- elf_end (0);
- ],
- [AC_MSG_RESULT([yes]);],
- [AC_MSG_RESULT([no]); enable_lto=no; libelflibs= ; libelfinc= ]
- )
-
- # Check for elf_getshdrstrndx or elf_getshstrndx. The latter's flavor
- # is determined in gcc/configure.ac.
- if test x"$enable_lto" = x"yes" ; then
- AC_MSG_CHECKING([for elf_getshdrstrndx])
- AC_TRY_LINK(
- [#include <libelf.h>],[
- elf_getshdrstrndx (0, 0);
- ],
- [AC_MSG_RESULT([yes]);],
- [AC_MSG_RESULT([no]);
- AC_MSG_CHECKING([for elf_getshstrndx])
- AC_TRY_LINK(
- [#include <libelf.h>],[
- elf_getshstrndx (0, 0);
- ],
- [AC_MSG_RESULT([yes]);],
- [AC_MSG_RESULT([no]); enable_lto=no; libelflibs= ; libelfinc= ]
- )]
- )
- fi
-
- # If we couldn't enable LTO and the user forced it, emit an error.
- if test x"$enable_lto" = x"no" \
- && test x"$default_enable_lto" != x"yes" ; then
- AC_MSG_ERROR([To enable LTO, GCC requires libelf v0.8.12+.
-Try the --with-libelf, --with-libelf-include and --with-libelf-lib options
-to specify its location.])
- fi
- fi
-
- CFLAGS="$saved_CFLAGS"
- CPPFLAGS="$saved_CPPFLAGS"
- LIBS="$saved_LIBS"
-
- fi
-
- # Flags needed for libelf.
- AC_SUBST(libelflibs)
- AC_SUBST(libelfinc)
-fi],[if test x"$default_enable_lto" = x"yes" ; then
- # On non-ELF platforms, LTO must be explicitly enabled.
- enable_lto=no
+ACX_ELF_TARGET_IFELSE([# ELF platforms build the lto-plugin always.
+ build_lto_plugin=yes
+],[if test x"$default_enable_lto" = x"yes" ; then
+ case $target in
+ *-apple-darwin* | *-cygwin* | *-mingw*) ;;
+ # On other non-ELF platforms, LTO has yet to be validated.
+ *) enable_lto=no ;;
+ esac
else
- # Apart from ELF platforms, only Windows supports LTO so far. It
- # would also be nice to check the binutils support, but we don't
+ # Apart from ELF platforms, only Windows and Darwin support LTO so far.
+ # It would also be nice to check the binutils support, but we don't
# have gcc_GAS_CHECK_FEATURE available here. For now, we'll just
# warn during gcc/ subconfigure; unless you're bootstrapping with
# -flto it won't be needed until after installation anyway.
case $target in
- *-cygwin*|*-mingw*) ;;
+ *-cygwin* | *-mingw* | *-apple-darwin*) ;;
*) if test x"$enable_lto" = x"yes"; then
AC_MSG_ERROR([LTO support is not enabled for this target.])
fi
;;
esac
fi
- default_enable_lto=no])
+ # Among non-ELF, only Windows platforms support the lto-plugin so far.
+ # Build it unless LTO was explicitly disabled.
+ case $target in
+ *-cygwin* | *-mingw*) build_lto_plugin=$enable_lto ;;
+ *) ;;
+ esac
+])
# By default, C is the only stage 1 language.
*,lto,*) ;;
*) enable_languages="${enable_languages},lto" ;;
esac
- if test "${ENABLE_GOLD}" = "yes" ; then
+ if test "${build_lto_plugin}" = "yes" ; then
configdirs="$configdirs lto-plugin"
extra_host_libiberty_configure_flags=--enable-shared
fi
fi
baseargs="$baseargs --disable-option-checking"
+# Record and document user additions to sub configure arguments.
+AC_ARG_VAR([build_configargs],
+ [additional configure arguments for build directories])
+AC_ARG_VAR([host_configargs],
+ [additional configure arguments for host directories])
+AC_ARG_VAR([target_configargs],
+ [additional configure arguments for target directories])
+
# For the build-side libraries, we just need to pretend we're native,
# and not use the same cache file. Multilibs are neither needed nor
# desired.
-build_configargs="--cache-file=../config.cache ${baseargs}"
+build_configargs="$build_configargs --cache-file=../config.cache ${baseargs}"
# For host modules, accept cache file option, or specification as blank.
case "${cache_file}" in
# Host dirs don't like to share a cache file either, horribly enough.
# This seems to be due to autoconf 2.5x stupidity.
-host_configargs="--cache-file=./config.cache ${extra_host_args} ${baseargs}"
+host_configargs="$host_configargs --cache-file=./config.cache ${extra_host_args} ${baseargs}"
-target_configargs=${baseargs}
+target_configargs="$target_configargs ${baseargs}"
# Passing a --with-cross-host argument lets the target libraries know
# whether they are being built with a cross-compiler or being built
OSDN Git Service
