build_libs="build-libiberty"
# these tools are built for the build environment
-build_tools="build-texinfo build-byacc build-flex build-bison build-m4 build-fixincludes"
+build_tools="build-texinfo build-flex build-bison build-m4 build-fixincludes"
# these libraries are used by various programs built for the host environment
#
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libelf libiconv"
+host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libelf libiconv"
# these tools are built for the host environment
# Note, the powerpc-eabi build depends on sim occurring before gdb in order to
# binutils, gas and ld appear in that order because it makes sense to run
# "make check" in that particular order.
# If --enable-gold is used, "gold" may replace "ld".
-host_tools="texinfo byacc flex bison binutils gas ld fixincludes gcc cgen sid sim gdb make patch prms send-pr gprof etc expect dejagnu ash bash bzip2 m4 autoconf automake libtool diff rcs fileutils shellutils time textutils wdiff find uudecode hello tar gzip indent recode release sed utils guile perl gawk findutils gettext zip fastjar gnattools"
+host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools"
# libgcj represents the runtime libraries only used by gcj.
libgcj="target-libffi \
target-zlib \
- target-qthreads \
target-libjava"
# these libraries are built for the target environment, and are built after
# note: any program that *uses* libraries that are in the "target_libraries"
# list belongs in this list.
#
-target_tools="target-examples target-gperf target-rda"
+target_tools="target-rda"
################################################################################
;;
esac
+# Disable Java if libffi is not supported.
+case "${target}" in
+ alpha*-*-*)
+ ;;
+ arm*-*-*)
+ ;;
+ cris-*-*)
+ ;;
+ frv-*-*)
+ ;;
+ hppa*-*-linux*)
+ ;;
+ hppa*-*-hpux*)
+ ;;
+ i?86-*-*)
+ ;;
+ ia64*-*-*)
+ ;;
+ m32r*-*-*)
+ ;;
+ m68k-*-*)
+ ;;
+ mips-sgi-irix6.* | mips*-*-rtems*)
+ ;;
+ mips*-*-linux*)
+ ;;
+ powerpc*-*-linux*)
+ ;;
+ powerpc-*-darwin*)
+ ;;
+ powerpc-*-aix* | rs6000-*-aix*)
+ ;;
+ powerpc-*-freebsd*)
+ ;;
+ powerpc64-*-freebsd*)
+ ;;
+ powerpc*-*-rtems*)
+ ;;
+ s390-*-* | s390x-*-*)
+ ;;
+ sh-*-* | sh[[34]]*-*-*)
+ ;;
+ sh64-*-* | sh5*-*-*)
+ ;;
+ sparc*-*-*)
+ ;;
+ x86_64-*-*)
+ ;;
+ *-*-*)
+ unsupported_languages="$unsupported_languages java"
+ ;;
+esac
+
+# Disable Java, libgcj or related libraries for some systems.
+case "${target}" in
+ powerpc-*-darwin*)
+ ;;
+ i[[3456789]]86-*-darwin*)
+ ;;
+ x86_64-*-darwin[[912]]*)
+ ;;
+ *-*-darwin*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ *-*-netware*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ *-*-rtems*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ *-*-tpf*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ *-*-uclinux*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ *-*-vxworks*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ alpha*-*-*vms*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ arm-wince-pe)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ arm*-*-symbianelf*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ bfin-*-*)
+ noconfigdirs="$noconfigdirs target-boehm-gc"
+ ;;
+ cris-*-* | crisv32-*-*)
+ unsupported_languages="$unsupported_languages java"
+ case "${target}" in
+ *-*-linux*)
+ ;;
+ *) # See PR46792 regarding target-libffi.
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
+ esac
+ ;;
+ hppa*64*-*-linux*)
+ # In this case, it's because the hppa64-linux target is for
+ # the kernel only at this point and has no libc, and thus no
+ # headers, crt*.o, etc., all of which are needed by these.
+ unsupported_languages="$unsupported_languages java"
+ ;;
+ hppa*64*-*-hpux*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ hppa*-hp-hpux11*)
+ ;;
+ hppa*-*-hpux*)
+ # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
+ # build on HP-UX 10.20.
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ ia64*-*-*vms*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ i[[3456789]]86-w64-mingw*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ i[[3456789]]86-*-mingw*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ x86_64-*-mingw*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ mmix-*-*)
+ noconfigdirs="$noconfigdirs target-libffi target-boehm-gc"
+ ;;
+ powerpc-*-aix*)
+ # copied from rs6000-*-* entry
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ rs6000-*-aix*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ mips*-*-irix6*)
+ # Linking libjava exceeds command-line length limits on at least
+ # IRIX 6.2, but not on IRIX 6.5.
+ # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
+ # <oldham@codesourcery.com>
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+ *-*-lynxos*)
+ noconfigdirs="$noconfigdirs ${libgcj}"
+ ;;
+esac
+
# Default libgloss CPU subdirectory.
libgloss_dir="$target_cpu"
case "${target}" in
+ sh*-*-pe|mips*-*-pe|*arm-wince-pe)
+ libgloss_dir=wince
+ ;;
+ arm*-*-*)
+ libgloss_dir=arm
+ ;;
+ cris-*-* | crisv32-*-*)
+ libgloss_dir=cris
+ ;;
+ hppa*-*-*)
+ libgloss_dir=pa
+ ;;
+ i[[3456789]]86-*-*)
+ libgloss_dir=i386
+ ;;
+ m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
+ libgloss_dir=m68hc11
+ ;;
+ m68*-*-* | fido-*-*)
+ libgloss_dir=m68k
+ ;;
+ mips*-*-*)
+ libgloss_dir=mips
+ ;;
+ powerpc*-*-*)
+ libgloss_dir=rs6000
+ ;;
+ sparc*-*-*)
+ libgloss_dir=sparc
+ ;;
+esac
+
+# Disable newlib and libgloss for various target OSes.
+case "${target}" in
+ alpha*-dec-osf*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ i[[3456789]]86-*-linux*)
+ # This section makes it possible to build newlib natively on linux.
+ # If we are using a cross compiler then don't configure newlib.
+ if test x${is_cross_compiler} != xno ; then
+ noconfigdirs="$noconfigdirs target-newlib"
+ fi
+ noconfigdirs="$noconfigdirs target-libgloss"
+ # If we are not using a cross compiler, do configure newlib.
+ # Note however, that newlib will only be configured in this situation
+ # if the --with-newlib option has been given, because otherwise
+ # 'target-newlib' will appear in skipdirs.
+ ;;
+ i[[3456789]]86-*-rdos*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ sh*-*-pe|mips*-*-pe|arm-wince-pe)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ sparc-*-sunos4*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-aix*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-beos*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
*-*-chorusos)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
+ *-*-dragonfly*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-freebsd*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-lynxos*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-mingw*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-netbsd*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-netware*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-tpf*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-uclinux*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+ *-*-vxworks*)
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ ;;
+esac
+
+case "${target}" in
+ *-*-chorusos)
+ ;;
powerpc-*-darwin*)
noconfigdirs="$noconfigdirs ld gas gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
*-*-darwin*)
noconfigdirs="$noconfigdirs ld gas gdb gprof"
noconfigdirs="$noconfigdirs sim target-rda"
- noconfigdirs="$noconfigdirs ${libgcj}"
;;
*-*-dragonfly*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
*-*-freebsd*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
if test "x$with_gmp" = x && test "x$with_gmp_dir" = x \
&& test -f /usr/local/include/gmp.h; then
with_gmp=/usr/local
fi
-
- # Skip some stuff that's unsupported on some FreeBSD configurations.
- case "${target}" in
- i*86-*-*) ;;
- alpha*-*-*) ;;
- x86_64-*-*) ;;
- *)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- esac
;;
*-*-kaos*)
# Remove unsupported stuff on all kaOS configurations.
noconfigdirs="$noconfigdirs target-libgloss"
;;
*-*-netbsd*)
- # Skip some stuff on all NetBSD configurations.
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
-
- # Skip some stuff that's unsupported on some NetBSD configurations.
- case "${target}" in
- i*86-*-netbsdelf*) ;;
- arm*-*-netbsdelf*) ;;
- *)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- esac
;;
*-*-netware*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
*-*-rtems*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
# The tpf target doesn't support gdb yet.
*-*-tpf*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj} gdb tcl tk libgui itcl"
+ noconfigdirs="$noconfigdirs gdb tcl tk libgui itcl"
;;
*-*-uclinux*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
+ noconfigdirs="$noconfigdirs target-rda"
;;
*-*-vxworks*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
;;
alpha*-dec-osf*)
# ld works, but does not support shared libraries.
- # newlib is not 64 bit ready.
# gas doesn't generate exception information.
- noconfigdirs="$noconfigdirs gas ld target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs gas ld"
;;
alpha*-*-*vms*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
- ;;
- alpha*-*-linux*)
- # newlib is not 64 bit ready
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
;;
alpha*-*-*)
# newlib is not 64 bit ready
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
- ;;
- am33_2.0-*-linux*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
- sh-*-linux*)
- noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
- ;;
sh*-*-pe|mips*-*-pe|*arm-wince-pe)
- noconfigdirs="$noconfigdirs ${libgcj}"
noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
- noconfigdirs="$noconfigdirs target-newlib"
- libgloss_dir=wince
;;
arc-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
- arm-*-coff)
- libgloss_dir=arm
- ;;
- arm-*-elf* | arm*-*-eabi* )
- noconfigdirs="$noconfigdirs target-libffi"
- libgloss_dir=arm
- ;;
- arm*-*-linux-gnueabi)
- case ${with_newlib} in
- no) noconfigdirs="$noconfigdirs target-newlib target-libgloss"
- esac
- libgloss_dir=arm
- ;;
- arm*-*-symbianelf*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- libgloss_dir=arm
- ;;
arm-*-pe*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
arm-*-riscix*)
noconfigdirs="$noconfigdirs ld target-libgloss"
;;
- avr-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- bfin-*-*)
- unsupported_languages="$unsupported_languages java"
- noconfigdirs="$noconfigdirs target-boehm-gc"
- ;;
c4x-*-* | tic4x-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
;;
noconfigdirs="$noconfigdirs target-libgloss gdb"
;;
cr16-*-*)
- noconfigdirs="$noconfigdirs ${libgcj} gdb"
- ;;
- cris-*-* | crisv32-*-*)
- unsupported_languages="$unsupported_languages java"
- case "${target}" in
- *-*-linux*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
- *) # See PR46792 regarding target-libffi.
- noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
- esac
- libgloss_dir=cris
+ noconfigdirs="$noconfigdirs gdb"
;;
d10v-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
noconfigdirs="$noconfigdirs gdb"
;;
fr30-*-elf*)
- noconfigdirs="$noconfigdirs ${libgcj} gdb"
- ;;
- frv-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb"
;;
moxie-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
noconfigdirs="$noconfigdirs gprof"
;;
h8300*-*-*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs target-libgloss"
;;
h8500-*-*)
noconfigdirs="$noconfigdirs target-libgloss"
hppa1.1-*-osf* | hppa1.1-*-bsd* )
;;
hppa*64*-*-linux*)
- # In this case, it's because the hppa64-linux target is for
- # the kernel only at this point and has no libc, and thus no
- # headers, crt*.o, etc., all of which are needed by these.
- noconfigdirs="$noconfigdirs target-zlib"
;;
hppa*-*-linux*)
;;
hppa*-*-lites* | \
hppa*-*-openbsd* | \
hppa*64*-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
;;
hppa*-hp-hpux11*)
noconfigdirs="$noconfigdirs ld"
;;
hppa*-*-pro*)
- libgloss_dir=pa
;;
hppa*-*-*)
- # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
- # build on HP-UX 10.20.
- noconfigdirs="$noconfigdirs ld ${libgcj}"
+ noconfigdirs="$noconfigdirs ld"
;;
i960-*-*)
noconfigdirs="$noconfigdirs gdb"
;;
ia64*-**-hpux*)
# No ld support yet.
- noconfigdirs="$noconfigdirs ${libgcj} libgui itcl ld"
+ noconfigdirs="$noconfigdirs libgui itcl ld"
;;
ia64*-*-*vms*)
# No gdb or ld support yet.
- noconfigdirs="$noconfigdirs ${libgcj} readline libgui itcl gdb ld"
- ;;
- i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
- noconfigdirs="$noconfigdirs ${libgcj}"
- libgloss_dir=i386
- ;;
- i[[3456789]]86-*-linux*)
- # This section makes it possible to build newlib natively on linux.
- # If we are using a cross compiler then don't configure newlib.
- if test x${is_cross_compiler} != xno ; then
- noconfigdirs="$noconfigdirs target-newlib"
- fi
- noconfigdirs="$noconfigdirs target-libgloss"
- # If we are not using a cross compiler, do configure newlib.
- # Note however, that newlib will only be configured in this situation
- # if the --with-newlib option has been given, because otherwise
- # 'target-newlib' will appear in skipdirs.
+ noconfigdirs="$noconfigdirs readline libgui itcl gdb ld"
;;
i[[3456789]]86-w64-mingw*)
- noconfigdirs="$noconfigdirs target-libgloss target-newlib ${libgcj}"
;;
i[[3456789]]86-*-mingw*)
target_configdirs="$target_configdirs target-winsup"
- noconfigdirs="$noconfigdirs target-libgloss target-newlib ${libgcj}"
- ;;
- x86_64-*-mingw*)
- noconfigdirs="$noconfigdirs target-libgloss target-newlib ${libgcj}"
;;
*-*-cygwin*)
target_configdirs="$target_configdirs target-libtermcap target-winsup"
echo "Warning: winsup/cygwin is missing so newlib can't be built."
fi
;;
- i[[3456789]]86-*-interix* )
- ;;
i[[3456789]]86-*-pe)
noconfigdirs="$noconfigdirs target-libgloss"
;;
noconfigdirs="$noconfigdirs target-libgloss"
;;
i[[3456789]]86-*-beos*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
+ noconfigdirs="$noconfigdirs gdb"
;;
i[[3456789]]86-*-rdos*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
- ;;
- m32r-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
- libgloss_dir=m68hc11
- ;;
- m68k-*-elf*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- m68*-*-* | fido-*-*)
- libgloss_dir=m68k
+ noconfigdirs="$noconfigdirs gdb"
;;
mmix-*-*)
- noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb"
- unsupported_languages="$unsupported_languages java"
+ noconfigdirs="$noconfigdirs gdb"
;;
mt-*-*)
noconfigdirs="$noconfigdirs sim"
;;
powerpc-*-aix*)
# copied from rs6000-*-* entry
- noconfigdirs="$noconfigdirs gprof target-libgloss target-newlib ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof"
;;
powerpc*-*-winnt* | powerpc*-*-pe*)
target_configdirs="$target_configdirs target-winsup"
# This is temporary until we can link against shared libraries
powerpcle-*-solaris*)
noconfigdirs="$noconfigdirs gdb sim tcl tk itcl"
- libgloss_dir=rs6000
;;
powerpc-*-beos*)
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
- ;;
- powerpc-*-eabi)
- noconfigdirs="$noconfigdirs ${libgcj}"
- libgloss_dir=rs6000
- ;;
- powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* )
- libgloss_dir=rs6000
+ noconfigdirs="$noconfigdirs gdb"
;;
rs6000-*-lynxos*)
- noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof"
;;
rs6000-*-aix*)
- noconfigdirs="$noconfigdirs gprof target-libgloss target-newlib ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof"
;;
rs6000-*-*)
- noconfigdirs="$noconfigdirs gprof ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof"
;;
m68k-apollo-*)
noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss"
;;
microblaze*)
- noconfigdirs="$noconfigdirs gprof ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof"
;;
mips*-sde-elf*)
- noconfigdirs="$noconfigdirs ${libgcj}"
if test x$with_newlib = xyes; then
noconfigdirs="$noconfigdirs gprof"
fi
- libgloss_dir=mips
;;
mips*-*-irix5*)
noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
mips*-*-irix6*)
- # Linking libjava exceeds command-line length limits on at least
- # IRIX 6.2, but not on IRIX 6.5.
- # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham
- # <oldham@codesourcery.com>
- noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+ noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
mips*-*-bsd*)
noconfigdirs="$noconfigdirs gprof target-libgloss"
;;
mips*-*-linux*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
mips*-*-*)
- noconfigdirs="$noconfigdirs gprof ${libgcj}"
- libgloss_dir=mips
+ noconfigdirs="$noconfigdirs gprof"
;;
sh-*-* | sh64-*-*)
case "${target}" in
sh*-*-elf)
- noconfigdirs="$noconfigdirs ${libgcj}" ;;
+ ;;
*)
- noconfigdirs="$noconfigdirs target-libgloss ${libgcj}" ;;
+ noconfigdirs="$noconfigdirs target-libgloss" ;;
esac
;;
- sparclet-*-aout* | sparc86x-*-*)
- libgloss_dir=sparc
- ;;
- sparc-*-elf*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
- sparc64-*-elf*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- libgloss_dir=sparc
- ;;
- sparclite-*-*)
- libgloss_dir=sparc
- ;;
sparc-*-sunos4*)
- if test x${is_cross_compiler} != xno ; then
- noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
- else
+ if test x${is_cross_compiler} = xno ; then
use_gnu_ld=no
fi
;;
- sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
- ;;
tic6x-*-*)
- noconfigdirs="$noconfigdirs gdb sim ${libgcj}"
+ noconfigdirs="$noconfigdirs gdb sim"
;;
v810-*-*)
noconfigdirs="$noconfigdirs bfd binutils gas gdb ld opcodes target-libgloss"
;;
vax-*-*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
- ;;
- *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
noconfigdirs="$noconfigdirs target-newlib target-libgloss"
;;
- *-*-lynxos*)
- noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
- ;;
- *-*-*)
- noconfigdirs="$noconfigdirs ${libgcj}"
- ;;
esac
# If we aren't building newlib, then don't build libgloss, since libgloss
build_lto_plugin=yes
],[if test x"$default_enable_lto" = x"yes" ; then
case $target in
- *-apple-darwin9 | *-cygwin* | *-mingw*) ;;
+ *-apple-darwin9* | *-cygwin* | *-mingw*) ;;
# On other non-ELF platforms, LTO has yet to be validated.
*) enable_lto=no ;;
esac
fi
AC_SUBST(CXXFLAGS_FOR_TARGET)
+AC_SUBST(LDFLAGS_FOR_TARGET)
+
# Handle --with-headers=XXX. If the value is not "yes", the contents of
# the named directory are copied to $(tooldir)/sys-include.
if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
esac
fi
-# hpux11 in 64bit mode has libraries in a weird place. Arrange to find
-# them automatically.
-case "${host}" in
- hppa*64*-*-hpux11*)
- extra_host_args="$extra_host_args -x-libraries=/usr/lib/pa20_64 -x-includes=/usr/X11R6/include"
- ;;
-esac
-
# Some systems (e.g., one of the i386-aix systems the gas testers are
# using) don't handle "\$" correctly, so don't use it here.
tooldir='${exec_prefix}'/${target_noncanonical}
esac
rm -f conftest*
-# The Solaris /usr/ucb/cc compiler does not appear to work.
-case "${host}" in
- sparc-sun-solaris2*)
- CCBASE="`echo ${CC-cc} | sed 's/ .*$//'`"
- if test "`type $CCBASE | sed 's/^[[^/]]*//'`" = "/usr/ucb/cc" ; then
- could_use=
- test -d /opt/SUNWspro/bin && could_use="/opt/SUNWspro/bin"
- if test -d /opt/cygnus/bin ; then
- if test "$could_use" = "" ; then
- could_use="/opt/cygnus/bin"
- else
- could_use="$could_use or /opt/cygnus/bin"
- fi
- fi
- if test "$could_use" = "" ; then
- echo "Warning: compilation may fail because you're using"
- echo "/usr/ucb/cc. You should change your PATH or CC "
- echo "variable and rerun configure."
- else
- echo "Warning: compilation may fail because you're using"
- echo "/usr/ucb/cc, when you should use the C compiler from"
- echo "$could_use. You should change your"
- echo "PATH or CC variable and rerun configure."
- fi
- fi
- ;;
-esac
-
# Decide which environment variable is used to find dynamic libraries.
case "${host}" in
*-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
AC_CHECK_PROGS([YACC], ['bison -y' byacc yacc], [$MISSING bison -y])
case " $build_configdirs " in
*" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;;
- *" byacc "*) YACC='$$r/$(BUILD_SUBDIR)/byacc/byacc' ;;
esac
AC_CHECK_PROGS([BISON], [bison], [$MISSING bison])
OSDN Git Service
