OSDN Git Service

* config/arm/thumb2.md (thumb2_zero_extendsidi2): Add a split
[pf3gnuchains/gcc-fork.git] / configure.ac
index 77b3251..1bcd025 100644 (file)
@@ -1,10 +1,10 @@
 #   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
-#   2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation,
+#   2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
 #   Inc.
 #
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
+# the Free Software Foundation; either version 3 of the License, or
 # (at your option) any later version.
 #
 # This program is distributed in the hope that it will be useful, but
@@ -13,8 +13,8 @@
 # General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+# along with this program; see the file COPYING3.  If not see
+# <http://www.gnu.org/licenses/>.
 
 ##############################################################################
 ### WARNING: this file contains embedded tabs.  Do not run untabify on this file.
@@ -158,7 +158,7 @@ build_tools="build-texinfo build-byacc build-flex build-bison build-m4 build-fix
 
 # these libraries are used by various programs built for the host environment
 #
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr ppl cloog"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr ppl cloog libiconv"
 
 # these tools are built for the host environment
 # Note, the powerpc-eabi build depends on sim occurring before gdb in order to
@@ -408,7 +408,7 @@ esac
 # Disable libmudflap on some systems.
 if test x$enable_libmudflap = x ; then
     case "${target}" in
-    *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | bfin*-*-uclinux*)
+    *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | bfin*-*-uclinux* | *-*-kopensolaris*-gnu)
         # Enable libmudflap by default in GNU and friends.
        ;;
     *-*-freebsd*)
@@ -425,7 +425,7 @@ fi
 if test x$enable_libgomp = x ; then
     # Enable libgomp by default on hosted POSIX systems.
     case "${target}" in
-    *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
+    *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
        ;;
     *-*-netbsd* | *-*-freebsd* | *-*-openbsd*)
        ;;
@@ -446,10 +446,14 @@ case "${target}" in
   *-*-chorusos)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
-  powerpc-*-darwin* | i[[3456789]]86-*-darwin* | x86_64-*-darwin9*)
+  powerpc-*-darwin*)
     noconfigdirs="$noconfigdirs ld gas gdb gprof"
     noconfigdirs="$noconfigdirs sim target-rda"
     ;;
+  i[[3456789]]86-*-darwin* | x86_64-*-darwin[[912]]*)
+    noconfigdirs="$noconfigdirs ld gas gprof"
+    noconfigdirs="$noconfigdirs sim target-rda"
+    ;;
   *-*-darwin*)
     noconfigdirs="$noconfigdirs ld gas gdb gprof"
     noconfigdirs="$noconfigdirs sim target-rda"
@@ -640,6 +644,10 @@ case "${target}" in
   frv-*-*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
+  moxie-*-*)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof"
+    ;;
   h8300*-*-*)
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
@@ -684,6 +692,10 @@ case "${target}" in
     # No gdb or ld support yet.
     noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
     ;;
+  ia64*-*-*vms*)
+    # No gdb or ld support yet.
+    noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
+    ;;
   i370-*-opened*)
     ;;
   i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
@@ -719,7 +731,7 @@ case "${target}" in
     ;;    
   *-*-cygwin*)
     target_configdirs="$target_configdirs target-libtermcap target-winsup"
-    noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-gperf target-libgloss"
     # always build newlib if winsup directory is present.
     if test -d "$srcdir/winsup/cygwin"; then
       skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
@@ -891,8 +903,6 @@ case "${target}" in
     ;;
   sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
     ;;
-  spu-*-*)
-    ;;
   v810-*-*)
     noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
     ;;
@@ -917,7 +927,7 @@ case "${target}" in
   ip2k-*-*)
     noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
     ;;
-  *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
+  *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   *-*-lynxos*)
@@ -1244,6 +1254,7 @@ fi
 if test "x$with_gmp$with_gmp_include$with_gmp_lib" = x && test -d ${srcdir}/gmp; then
   gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/.libs -L$$r/$(HOST_SUBDIR)/gmp/_libs '"$gmplibs"
   gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp '"$gmpinc"
+  extra_mpfr_configure_flags='--with-gmp-build=$$r/$(HOST_SUBDIR)/gmp'
   # Do not test the gmp version.  Assume that it is sufficient, since
   # it is in the source tree, and the library has not been built yet
   # but it would be included on the link line in the version check below
@@ -1258,7 +1269,7 @@ if test -d ${srcdir}/gcc && test "x$have_gmp" = xno; then
   # Check GMP actually works
   AC_MSG_CHECKING([for correct version of gmp.h])
   AC_TRY_COMPILE([#include "gmp.h"],[
-  #if __GNU_MP_VERSION < 4 || (__GNU_MP_VERSION == 4 && __GNU_MP_VERSION_MINOR < 1)
+  #if __GNU_MP_VERSION < 4 || (__GNU_MP_VERSION == 4 && __GNU_MP_VERSION_MINOR < 2)
   choke me
   #endif
   ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); have_gmp=no])
@@ -1266,11 +1277,11 @@ if test -d ${srcdir}/gcc && test "x$have_gmp" = xno; then
   if test x"$have_gmp" = xyes; then
     saved_LIBS="$LIBS"
     LIBS="$LIBS $gmplibs"
-    dnl MPFR 2.3.0 is acceptable, but MPFR 2.3.2 is better.
+    dnl MPFR 2.3.1 is acceptable, but MPFR 2.3.2 is better.
     AC_MSG_CHECKING([for correct version of mpfr.h])
     AC_TRY_LINK([#include <gmp.h>
     #include <mpfr.h>],[
-    #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,0)
+    #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,1)
     choke me
     #endif
     mpfr_t n;
@@ -1294,7 +1305,7 @@ if test -d ${srcdir}/gcc && test "x$have_gmp" = xno; then
   CFLAGS="$saved_CFLAGS"
 
   if test x$have_gmp != xyes; then
-    AC_MSG_ERROR([Building GCC requires GMP 4.1+ and MPFR 2.3.2+.
+    AC_MSG_ERROR([Building GCC requires GMP 4.2+ and MPFR 2.3.2+.
 Try the --with-gmp and/or --with-mpfr options to specify their locations.
 Copies of these libraries' source code can be found at their respective
 hosting sites as well as at ftp://gcc.gnu.org/pub/gcc/infrastructure/.
@@ -1308,34 +1319,49 @@ fi
 # Flags needed for both GMP and/or MPFR
 AC_SUBST(gmplibs)
 AC_SUBST(gmpinc)
+AC_SUBST(extra_mpfr_configure_flags)
+
+# Allow host libstdc++ to be specified for static linking with PPL.
+AC_ARG_WITH(host-libstdcxx, [  --with-host-libstdcxx=L Use linker arguments L to link with libstdc++
+                          when linking with PPL])
 
+case $with_host_libstdcxx in
+  no|yes)
+    AC_MSG_ERROR([-with-host-libstdcxx needs an argument])
+    ;;
+esac
 
 # Check for PPL
 ppl_major_version=0
 ppl_minor_version=10
-ppllibs=
+ppllibs=" -lppl_c -lppl -lgmpxx $with_host_libstdcxx "
 pplinc=
 
 AC_ARG_WITH(ppl, [  --with-ppl=PATH         Specify prefix directory for the installed PPL package
                           Equivalent to --with-ppl-include=PATH/include
-                          plus --with-ppl-lib=PATH/lib])
+                          plus --with-ppl-lib=PATH/lib],, with_ppl=no)
 AC_ARG_WITH(ppl_include, [  --with-ppl-include=PATH Specify directory for installed PPL include files])
 AC_ARG_WITH(ppl_lib, [  --with-ppl-lib=PATH     Specify the directory for the installed PPL library])
 
-if test "x$with_ppl" != x; then
-  ppllibs="-L$with_ppl/lib -lppl_c -lppl -lgmpxx"
-  pplinc="-I$with_ppl/include $pplinc"
-  LIBS="$ppllibs $LIBS"
-fi
+case $with_ppl in 
+  no)
+    ppllibs=
+    ;;
+  *)
+    ppllibs="-L$with_ppl/lib -lppl_c -lppl -lgmpxx $with_host_libstdcxx"
+    pplinc="-I$with_ppl/include $pplinc"
+    LIBS="$ppllibs $LIBS"
+    ;;
+esac
 if test "x$with_ppl_include" != x; then
   pplinc="-I$with_ppl_include $pplinc"
 fi
 if test "x$with_ppl_lib" != x; then
-  ppllibs="-L$with_ppl_lib -lppl_c -lppl -lgmpxx"
+  ppllibs="-L$with_ppl_lib -lppl_c -lppl -lgmpxx $with_host_libstdcxx"
   LIBS="$ppllibs $LIBS"
 fi
 if test "x$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then
-  ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/.libs -L$$r/$(HOST_SUBDIR)/ppl/_libs -lppl_c -lppl -lgmpxx '
+  ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/.libs -L$$r/$(HOST_SUBDIR)/ppl/_libs -lppl_c -lppl -lgmpxx '"$with_host_libstdcxx "
   pplinc='-I$$r/$(HOST_SUBDIR)/ppl/include -I$$s/ppl/include '
   LIBS="$ppllibs $LIBS"
 fi
@@ -1368,21 +1394,21 @@ clooginc=" -DCLOOG_PPL_BACKEND "
 
 AC_ARG_WITH(cloog, [  --with-cloog=PATH       Specify prefix directory for the installed CLooG-PPL package
                           Equivalent to --with-cloog-include=PATH/include
-                          plus --with-cloog-lib=PATH/lib])
+                          plus --with-cloog-lib=PATH/lib],, with_cloog=no)
 AC_ARG_WITH(cloog_include, [  --with-cloog-include=PATH Specify directory for installed CLooG include files])
 AC_ARG_WITH(cloog_lib, [  --with-cloog-lib=PATH   Specify the directory for the installed CLooG library])
-AC_ARG_WITH(cloog-polylib, [  --with-cloog-polylib=PATH Specify prefix directory for the installed CLooG-PolyLib package])
 
-if test "x$with_cloog" != x; then
-  clooglibs="-L$with_cloog/lib -lcloog"
-  clooginc="-I$with_cloog/include -DCLOOG_PPL_BACKEND "
-  LIBS="$clooglibs $LIBS"
-fi
-if test "x$with_cloog_polylib" != x; then
-  clooglibs="-L$with_cloog/lib -lcloog"
-  clooginc="-I$with_cloog/include "
-  LIBS="$clooglibs $LIBS"
-fi
+case $with_cloog in 
+  no)
+    clooglibs=
+    clooginc=
+    ;;
+  *)
+    clooglibs="-L$with_cloog/lib -lcloog"
+    clooginc="-I$with_cloog/include -DCLOOG_PPL_BACKEND "
+    LIBS="$clooglibs $LIBS"
+    ;;
+esac
 if test "x$with_cloog_include" != x; then
   clooginc="-I$with_cloog_include -DCLOOG_PPL_BACKEND "
 fi
@@ -1851,12 +1877,6 @@ if test "x$CXXFLAGS_FOR_TARGET" = x; then
 fi
 AC_SUBST(CXXFLAGS_FOR_TARGET)
 
-# Other target tools.
-CPPFLAGS_FOR_TARGET=${CPPFLAGS_FOR_TARGET-${CPPFLAGS}}
-AC_SUBST(CPPFLAGS_FOR_TARGET)
-LDFLAGS_FOR_TARGET=${LDFLAGS_FOR_TARGET-${LDFLAGS}}
-AC_SUBST(LDFLAGS_FOR_TARGET)
-
 # Handle --with-headers=XXX.  If the value is not "yes", the contents of
 # the named directory are copied to $(tooldir)/sys-include.
 if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then
@@ -2024,7 +2044,7 @@ case "${target}" in
   *-*-netware*)
     target_makefile_frag="config/mt-netware"
     ;;
-  *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
+  *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
     target_makefile_frag="config/mt-gnu"
     ;;
   *-*-aix4.[[3456789]]* | *-*-aix[[56789]].*)
@@ -2597,7 +2617,6 @@ esac
 # our build compiler if desired.
 if test x"${build}" = x"${host}" ; then
   CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}}
-  CPPFLAGS_FOR_BUILD=${CPPFLAGS_FOR_BUILD-${CPPFLAGS}}
   CXXFLAGS_FOR_BUILD=${CXXFLAGS_FOR_BUILD-${CXXFLAGS}}
   LDFLAGS_FOR_BUILD=${LDFLAGS_FOR_BUILD-${LDFLAGS}}
 fi
@@ -2663,7 +2682,6 @@ AC_SUBST(AR_FOR_BUILD)
 AC_SUBST(AS_FOR_BUILD)
 AC_SUBST(CC_FOR_BUILD)
 AC_SUBST(CFLAGS_FOR_BUILD)
-AC_SUBST(CPPFLAGS_FOR_BUILD)
 AC_SUBST(CXXFLAGS_FOR_BUILD)
 AC_SUBST(CXX_FOR_BUILD)
 AC_SUBST(DLLTOOL_FOR_BUILD)
@@ -2714,10 +2732,10 @@ case " $build_configdirs " in
   *" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;;
   *)
 changequote(,)
-    # For an installed makeinfo, we require it to be from texinfo 4.6 or
+    # For an installed makeinfo, we require it to be from texinfo 4.7 or
     # higher, else we use the "missing" dummy.
     if ${MAKEINFO} --version \
-       | egrep 'texinfo[^0-9]*(4\.([6-9]|[1-9][0-9])|[5-9]|[1-9][0-9])' >/dev/null 2>&1; then
+       | egrep 'texinfo[^0-9]*(4\.([7-9]|[1-9][0-9])|[5-9]|[1-9][0-9])' >/dev/null 2>&1; then
       :
     else
       MAKEINFO="$MISSING makeinfo"