* modified is included with the above copyright notice.
*/
/* Boehm, November 17, 1995 12:13 pm PST */
-# include "gc_priv.h"
+# include "private/gc_priv.h"
# include <stdio.h>
# include <setjmp.h>
# if defined(OS2) || defined(CX_UX)
# endif
# ifdef AMIGA
# ifndef __GNUC__
-# include <dos/dos.h>
+# include <dos.h>
# else
# include <machine/reg.h>
# endif
/* on your architecture. Run the test_setjmp program to see whether */
/* there is any chance it will work. */
-#ifndef USE_GENERIC_PUSH_REGS
+#if !defined(USE_GENERIC_PUSH_REGS) && !defined(USE_ASM_PUSH_REGS)
+#undef HAVE_PUSH_REGS
void GC_push_regs()
{
# ifdef RT
register long TMP_SP; /* must be bound to r11 */
# endif
-# if defined(MIPS) && defined(LINUX)
- /* I'm not sure whether this has actually been tested. */
-# define call_push(x) asm("move $4," x ";"); asm("jal GC_push_one")
- call_push("$2");
- call_push("$3");
- call_push("$16");
- call_push("$17");
- call_push("$18");
- call_push("$19");
- call_push("$20");
- call_push("$21");
- call_push("$22");
- call_push("$23");
- call_push("$30");
-# undef call_push
-# endif /* MIPS && LINUX */
-
# ifdef VAX
/* VAX - generic code below does not work under 4.2 */
/* r1 through r5 are caller save, and therefore */
asm("pushl r8"); asm("calls $1,_GC_push_one");
asm("pushl r7"); asm("calls $1,_GC_push_one");
asm("pushl r6"); asm("calls $1,_GC_push_one");
+# define HAVE_PUSH_REGS
# endif
# if defined(M68K) && (defined(SUNOS4) || defined(NEXT))
/* M68K SUNOS - could be replaced by generic code */
asm("movl d7,sp@"); asm("jbsr _GC_push_one");
asm("addqw #0x4,sp"); /* put stack back where it was */
+# define HAVE_PUSH_REGS
# endif
# if defined(M68K) && defined(HP)
asm("mov.l %d7,(%sp)"); asm("jsr _GC_push_one");
asm("addq.w &0x4,%sp"); /* put stack back where it was */
+# define HAVE_PUSH_REGS
# endif /* M68K HP */
# if defined(M68K) && defined(AMIGA)
asm("mov.l %d7,(%sp)"); asm("jsr _GC_push_one");
asm("addq.w &0x4,%sp"); /* put stack back where it was */
+# define HAVE_PUSH_REGS
# else /* !__GNUC__ */
GC_push_one(getreg(REG_A2));
GC_push_one(getreg(REG_A3));
- GC_push_one(getreg(REG_A4));
+# ifndef __SASC
+ /* Can probably be changed to #if 0 -Kjetil M. (a4=globals)*/
+ GC_push_one(getreg(REG_A4));
+# endif
GC_push_one(getreg(REG_A5));
GC_push_one(getreg(REG_A6));
/* Skip stack pointer */
GC_push_one(getreg(REG_D5));
GC_push_one(getreg(REG_D6));
GC_push_one(getreg(REG_D7));
+# define HAVE_PUSH_REGS
# endif /* !__GNUC__ */
# endif /* AMIGA */
PushMacReg(d7);
add.w #4,sp ; fix stack.
}
+# define HAVE_PUSH_REGS
# undef PushMacReg
# endif /* THINK_C */
# if defined(__MWERKS__)
PushMacRegisters();
+# define HAVE_PUSH_REGS
# endif /* __MWERKS__ */
# endif /* MACOS */
# if defined(I386) &&!defined(OS2) &&!defined(SVR4) \
&& (defined(__MINGW32__) || !defined(MSWIN32)) \
&& !defined(SCO) && !defined(SCO_ELF) \
- && !(defined(LINUX) && defined(__ELF__)) \
+ && !(defined(LINUX) && defined(__ELF__)) \
&& !(defined(FREEBSD) && defined(__ELF__)) \
- && !defined(DOS4GW)
+ && !(defined(NETBSD) && defined(__ELF__)) \
+ && !(defined(OPENBSD) && defined(__ELF__)) \
+ && !(defined(BEOS) && defined(__ELF__)) \
+ && !defined(DOS4GW) && !defined(HURD)
/* I386 code, generic code does not appear to work */
/* It does appear to work under OS2, and asms dont */
/* This is used for some 38g UNIX variants and for CYGWIN32 */
asm("pushl %esi"); asm("call _GC_push_one"); asm("addl $4,%esp");
asm("pushl %edi"); asm("call _GC_push_one"); asm("addl $4,%esp");
asm("pushl %ebx"); asm("call _GC_push_one"); asm("addl $4,%esp");
+# define HAVE_PUSH_REGS
# endif
# if ( defined(I386) && defined(LINUX) && defined(__ELF__) ) \
- || ( defined(I386) && defined(FREEBSD) && defined(__ELF__) )
+ || ( defined(I386) && defined(FREEBSD) && defined(__ELF__) ) \
+ || ( defined(I386) && defined(NETBSD) && defined(__ELF__) ) \
+ || ( defined(I386) && defined(OPENBSD) && defined(__ELF__) ) \
+ || ( defined(I386) && defined(HURD) && defined(__ELF__) ) \
+ || ( defined(I386) && defined(DGUX) )
/* This is modified for Linux with ELF (Note: _ELF_ only) */
/* This section handles FreeBSD with ELF. */
asm("pushl %esi; call GC_push_one; addl $4,%esp");
asm("pushl %edi; call GC_push_one; addl $4,%esp");
asm("pushl %ebx; call GC_push_one; addl $4,%esp");
+# define HAVE_PUSH_REGS
# endif
+# if ( defined(I386) && defined(BEOS) && defined(__ELF__) )
+ /* As far as I can understand from */
+ /* http://www.beunited.org/articles/jbq/nasm.shtml, */
+ /* only ebp, esi, edi and ebx are not scratch. How MMX */
+ /* etc. registers should be treated, I have no idea. */
+ asm("pushl %ebp; call GC_push_one; addl $4,%esp");
+ asm("pushl %esi; call GC_push_one; addl $4,%esp");
+ asm("pushl %edi; call GC_push_one; addl $4,%esp");
+ asm("pushl %ebx; call GC_push_one; addl $4,%esp");
+# define HAVE_PUSH_REGS
+# endif
+
# if defined(I386) && defined(MSWIN32) && !defined(__MINGW32__) \
&& !defined(USE_GENERIC)
/* I386 code, Microsoft variant */
__asm push edi
__asm call GC_push_one
__asm add esp,4
+# define HAVE_PUSH_REGS
# endif
# if defined(I386) && (defined(SVR4) || defined(SCO) || defined(SCO_ELF))
asm("pushl %ebp"); asm("call GC_push_one"); asm("addl $4,%esp");
asm("pushl %esi"); asm("call GC_push_one"); asm("addl $4,%esp");
asm("pushl %edi"); asm("call GC_push_one"); asm("addl $4,%esp");
+# define HAVE_PUSH_REGS
# endif
# ifdef NS32K
asm ("movd r5, tos"); asm ("bsr ?_GC_push_one"); asm ("adjspb $-4");
asm ("movd r6, tos"); asm ("bsr ?_GC_push_one"); asm ("adjspb $-4");
asm ("movd r7, tos"); asm ("bsr ?_GC_push_one"); asm ("adjspb $-4");
+# define HAVE_PUSH_REGS
# endif
# if defined(SPARC)
- {
- word GC_save_regs_in_stack();
-
- GC_save_regs_ret_val = GC_save_regs_in_stack();
- }
+ GC_save_regs_ret_val = GC_save_regs_in_stack();
+# define HAVE_PUSH_REGS
# endif
# ifdef RT
asm("cas r11, r13, r0"); GC_push_one(TMP_SP); /* through */
asm("cas r11, r14, r0"); GC_push_one(TMP_SP); /* r15 */
asm("cas r11, r15, r0"); GC_push_one(TMP_SP);
+# define HAVE_PUSH_REGS
# endif
# if defined(M68K) && defined(SYSV)
asm("movl %d7,%sp@"); asm("jbsr GC_push_one");
asm("addqw #0x4,%sp"); /* put stack back where it was */
+# define HAVE_PUSH_REGS
# else /* !__GNUC__*/
asm("subq.w &0x4,%sp"); /* allocate word on top of stack */
asm("mov.l %d7,(%sp)"); asm("jsr GC_push_one");
asm("addq.w &0x4,%sp"); /* put stack back where it was */
+# define HAVE_PUSH_REGS
# endif /* !__GNUC__ */
# endif /* M68K/SYSV */
extern int *__libc_stack_end;
GC_push_all_stack (sp, __libc_stack_end);
+# define HAVE_PUSH_REGS
+ /* Isn't this redundant with the code to push the stack? */
}
# endif
/* other machines... */
-# if !(defined M68K) && !(defined VAX) && !(defined RT)
-# if !(defined SPARC) && !(defined I386) && !(defined NS32K)
-# if !defined(POWERPC) && !defined(UTS4)
-# if !defined(PJ) && !(defined(MIPS) && defined(LINUX))
- --> bad news <--
-# endif
-# endif
-# endif
+# if !defined(HAVE_PUSH_REGS)
+ --> We just generated an empty GC_push_regs, which
+ --> is almost certainly broken. Try defining
+ --> USE_GENERIC_PUSH_REGS instead.
# endif
}
-#endif /* !USE_GENERIC_PUSH_REGS */
+#endif /* !USE_GENERIC_PUSH_REGS && !USE_ASM_PUSH_REGS */
#if defined(USE_GENERIC_PUSH_REGS)
void GC_generic_push_regs(cold_gc_frame)
ptr_t cold_gc_frame;
{
- /* Generic code */
- /* The idea is due to Parag Patel at HP. */
- /* We're not sure whether he would like */
- /* to be he acknowledged for it or not. */
{
- static jmp_buf regs;
- register word * i = (word *) regs;
- register ptr_t lim = (ptr_t)(regs) + (sizeof regs);
-
- /* Setjmp on Sun 3s doesn't clear all of the buffer. */
- /* That tends to preserve garbage. Clear it. */
+ word dummy;
+
+# ifdef HAVE_BUILTIN_UNWIND_INIT
+ /* This was suggested by Richard Henderson as the way to */
+ /* force callee-save registers and register windows onto */
+ /* the stack. */
+ __builtin_unwind_init();
+# else /* !HAVE_BUILTIN_UNWIND_INIT */
+ /* Generic code */
+ /* The idea is due to Parag Patel at HP. */
+ /* We're not sure whether he would like */
+ /* to be he acknowledged for it or not. */
+ jmp_buf regs;
+ register word * i = (word *) regs;
+ register ptr_t lim = (ptr_t)(regs) + (sizeof regs);
+
+ /* Setjmp doesn't always clear all of the buffer. */
+ /* That tends to preserve garbage. Clear it. */
for (; (char *)i < lim; i++) {
*i = 0;
}
-# if defined(POWERPC) || defined(MSWIN32) || defined(UTS4) || defined(LINUX)
- (void) setjmp(regs);
-# else
- (void) _setjmp(regs);
-# endif
-# if defined(SPARC) || defined(IA64)
+# if defined(POWERPC) || defined(MSWIN32) || defined(MSWINCE) \
+ || defined(UTS4) || defined(LINUX) || defined(EWS4800)
+ (void) setjmp(regs);
+# else
+ (void) _setjmp(regs);
+ /* We don't want to mess with signals. According to */
+ /* SUSV3, setjmp() may or may not save signal mask. */
+ /* _setjmp won't, but is less portable. */
+# endif
+# endif /* !HAVE_BUILTIN_UNWIND_INIT */
+# if (defined(SPARC) && !defined(HAVE_BUILTIN_UNWIND_INIT)) \
+ || defined(IA64)
/* On a register window machine, we need to save register */
/* contents on the stack for this to work. The setjmp */
/* is probably not needed on SPARC, since pointers are */
/* needed on IA64, since some non-windowed registers are */
/* preserved. */
{
- word GC_save_regs_in_stack();
-
GC_save_regs_ret_val = GC_save_regs_in_stack();
+ /* On IA64 gcc, could use __builtin_ia64_flushrs() and */
+ /* __builtin_ia64_flushrs(). The latter will be done */
+ /* implicitly by __builtin_unwind_init() for gcc3.0.1 */
+ /* and later. */
}
# endif
GC_push_current_stack(cold_gc_frame);
+ /* Strongly discourage the compiler from treating the above */
+ /* as a tail-call, since that would pop the register */
+ /* contents before we get a chance to look at them. */
+ GC_noop1((word)(&dummy));
}
}
#endif /* USE_GENERIC_PUSH_REGS */
/* the stack. Return sp. */
# ifdef SPARC
asm(" .seg \"text\"");
-# ifdef SVR4
+# if defined(SVR4) || defined(NETBSD)
asm(" .globl GC_save_regs_in_stack");
asm("GC_save_regs_in_stack:");
asm(" .type GC_save_regs_in_stack,#function");
asm(" .globl _GC_save_regs_in_stack");
asm("_GC_save_regs_in_stack:");
# endif
- asm(" ta 0x3 ! ST_FLUSH_WINDOWS");
- asm(" mov %sp,%o0");
- asm(" retl");
- asm(" nop");
+# if defined(__arch64__) || defined(__sparcv9)
+ asm(" save %sp,-128,%sp");
+ asm(" flushw");
+ asm(" ret");
+ asm(" restore %sp,2047+128,%o0");
+# else
+ asm(" ta 0x3 ! ST_FLUSH_WINDOWS");
+ asm(" retl");
+ asm(" mov %sp,%o0");
+# endif
# ifdef SVR4
asm(" .GC_save_regs_in_stack_end:");
asm(" .size GC_save_regs_in_stack,.GC_save_regs_in_stack_end-GC_save_regs_in_stack");
/* On IA64, we also need to flush register windows. But they end */
/* up on the other side of the stack segment. */
/* Returns the backing store pointer for the register stack. */
-# ifdef IA64
+/* We now implement this as a separate assembly file, since inline */
+/* assembly code here doesn't work with either the Intel or HP */
+/* compilers. */
+# if 0
+# ifdef LINUX
asm(" .text");
asm(" .psr abi64");
asm(" .psr lsb");
asm(" mov r8=ar.bsp");
asm(" br.ret.sptk.few rp");
asm(" .endp GC_save_regs_in_stack");
+# endif /* LINUX */
+# if 0 /* Other alternatives that don't work on HP/UX */
+ word GC_save_regs_in_stack() {
+# if USE_BUILTINS
+ __builtin_ia64_flushrs();
+ return __builtin_ia64_bsp();
+# else
+# ifdef HPUX
+ _asm(" flushrs");
+ _asm(" ;;");
+ _asm(" mov r8=ar.bsp");
+ _asm(" br.ret.sptk.few rp");
+# else
+ asm(" flushrs");
+ asm(" ;;");
+ asm(" mov r8=ar.bsp");
+ asm(" br.ret.sptk.few rp");
+# endif
+# endif
+ }
+# endif
# endif
/* GC_clear_stack_inner(arg, limit) clears stack area up to limit and */
/* returns arg. Stack clearing is crucial on SPARC, so we supply */
/* an assembly version that's more careful. Assumes limit is hotter */
/* than sp, and limit is 8 byte aligned. */
-#if defined(ASM_CLEAR_CODE) && !defined(THREADS)
+#if defined(ASM_CLEAR_CODE)
#ifndef SPARC
--> fix it
#endif
asm("GC_clear_stack_inner:");
asm(".type GC_save_regs_in_stack,#function");
# endif
+#if defined(__arch64__) || defined(__sparcv9)
+ asm("mov %sp,%o2"); /* Save sp */
+ asm("add %sp,2047-8,%o3"); /* p = sp+bias-8 */
+ asm("add %o1,-2047-192,%sp"); /* Move sp out of the way, */
+ /* so that traps still work. */
+ /* Includes some extra words */
+ /* so we can be sloppy below. */
+ asm("loop:");
+ asm("stx %g0,[%o3]"); /* *(long *)p = 0 */
+ asm("cmp %o3,%o1");
+ asm("bgu,pt %xcc, loop"); /* if (p > limit) goto loop */
+ asm("add %o3,-8,%o3"); /* p -= 8 (delay slot) */
+ asm("retl");
+ asm("mov %o2,%sp"); /* Restore sp., delay slot */
+#else
asm("mov %sp,%o2"); /* Save sp */
asm("add %sp,-8,%o3"); /* p = sp-8 */
asm("clr %g1"); /* [g0,g1] = 0 */
asm("add %o3,-8,%o3"); /* p -= 8 (delay slot) */
asm("retl");
asm("mov %o2,%sp"); /* Restore sp., delay slot */
+#endif /* old SPARC */
/* First argument = %o0 = return value */
# ifdef SVR4
asm(" .GC_clear_stack_inner_end:");
OSDN Git Service
