OSDN Git Service

2002-03-30 Krister Walfridsson <cato@df.lth.se>
[pf3gnuchains/gcc-fork.git] / boehm-gc / configure
index b76a676..edfd4f1 100755 (executable)
@@ -37,9 +37,13 @@ ac_help="$ac_help
   --enable-maintainer-mode enable make rules and dependencies not useful
                           (and sometimes confusing) to the casual installer"
 ac_help="$ac_help
-  --enable-java-gc=TYPE   choose garbage collector [boehm]"
+  --enable-parallel-mark       parallelize marking and free list construction"
 ac_help="$ac_help
   --with-ecos             enable runtime eCos target support"
+ac_help="$ac_help
+  --enable-shared[=PKGS]  build shared libraries [default=no]"
+ac_help="$ac_help
+  --enable-full-debug  include full support for pointer backtracing etc."
 
 # Initialize some variables set by options.
 # The variables have the same names as the options, with
@@ -480,7 +484,7 @@ echo > confdefs.h
 
 # A filename unique to this package, relative to the directory that
 # configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=gc_mark.h
+ac_unique_file=gcj_mlc.c
 
 # Find the source files, if location was not specified.
 if test -z "$srcdir"; then
@@ -552,7 +556,7 @@ fi
 
 
 ac_aux_dir=
-for ac_dir in .. $srcdir/..; do
+for ac_dir in . $srcdir/.; do
   if test -f $ac_dir/install-sh; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install-sh -c"
@@ -564,103 +568,13 @@ for ac_dir in .. $srcdir/..; do
   fi
 done
 if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in .. $srcdir/.." 1>&2; exit 1; }
+  { echo "configure: error: can not find install-sh or install.sh in . $srcdir/." 1>&2; exit 1; }
 fi
 ac_config_guess=$ac_aux_dir/config.guess
 ac_config_sub=$ac_aux_dir/config.sub
 ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
 
 
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-#    same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-#    as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:603: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
-  case $nonopt in
-  NONE)
-    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
-    else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
-    fi ;;
-  *) host_alias=$nonopt ;;
-  esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:624: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
-  case $nonopt in
-  NONE) target_alias=$host_alias ;;
-  *) target_alias=$nonopt ;;
-  esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:642: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
-  case $nonopt in
-  NONE) build_alias=$host_alias ;;
-  *) build_alias=$nonopt ;;
-  esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
-  test "$program_prefix$program_suffix$program_transform_name" = \
-    NONENONEs,x,x, &&
-  program_prefix=${target_alias}-
-
-
 # Find a good install program.  We prefer a C program (faster),
 # so one script is as good as another.  But avoid the broken or
 # incompatible versions:
@@ -673,7 +587,7 @@ test "$host_alias" != "$target_alias" &&
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:677: checking for a BSD compatible install" >&5
+echo "configure:591: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -726,7 +640,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:730: checking whether build environment is sane" >&5
+echo "configure:644: checking whether build environment is sane" >&5
 # Just in case
 sleep 1
 echo timestamp > conftestfile
@@ -783,7 +697,7 @@ test "$program_suffix" != NONE &&
 test "$program_transform_name" = "" && program_transform_name="s,x,x,"
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:787: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:701: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -816,12 +730,12 @@ else
 fi
 
 echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:820: checking for Cygwin environment" >&5
+echo "configure:734: checking for Cygwin environment" >&5
 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 825 "configure"
+#line 739 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -832,7 +746,7 @@ int main() {
 return __CYGWIN__;
 ; return 0; }
 EOF
-if { (eval echo configure:836: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:750: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_cygwin=yes
 else
@@ -849,19 +763,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6
 CYGWIN=
 test "$ac_cv_cygwin" = yes && CYGWIN=yes
 echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:853: checking for mingw32 environment" >&5
+echo "configure:767: checking for mingw32 environment" >&5
 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 858 "configure"
+#line 772 "configure"
 #include "confdefs.h"
 
 int main() {
 return __MINGW32__;
 ; return 0; }
 EOF
-if { (eval echo configure:865: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:779: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_mingw32=yes
 else
@@ -892,15 +806,78 @@ fi
 
 
 if test "${srcdir}" = "."; then
-  if test "${with_target_subdir}" != "."; then
-    boehm_gc_basedir="${srcdir}/${with_multisrctop}../."
+  if test "${with_target_subdir}" != "." -a -n "${with_target_subdir}"; then
+    gc_basedir="${srcdir}/${with_multisrctop}../."
   else
-    boehm_gc_basedir="${srcdir}/${with_multisrctop}."
+    gc_basedir="${srcdir}/${with_multisrctop}."
   fi
 else
-  boehm_gc_basedir="${srcdir}/."
+  gc_basedir="${srcdir}/."
+fi
+
+ac_aux_dir=
+for ac_dir in $gc_basedir/.. $srcdir/$gc_basedir/..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in $gc_basedir/.. $srcdir/$gc_basedir/.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+if :; then :; else
+  # This overrides the previous occurrence for automake, but not for
+  # autoconf, which is exactly what we want.
+  ac_aux_dir=
+for ac_dir in .. $srcdir/..; do
+  if test -f $ac_dir/install-sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install-sh -c"
+    break
+  elif test -f $ac_dir/install.sh; then
+    ac_aux_dir=$ac_dir
+    ac_install_sh="$ac_aux_dir/install.sh -c"
+    break
+  fi
+done
+if test -z "$ac_aux_dir"; then
+  { echo "configure: error: can not find install-sh or install.sh in .. $srcdir/.." 1>&2; exit 1; }
 fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+fi
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+#    configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+#    same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+#    as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
 
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
 
 
 # Make sure we can run config.sub.
@@ -909,7 +886,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:913: checking host system type" >&5
+echo "configure:890: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -929,11 +906,56 @@ host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
 host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:911: checking target system type" >&5
 
+target_alias=$target
+case "$target_alias" in
+NONE)
+  case $nonopt in
+  NONE) target_alias=$host_alias ;;
+  *) target_alias=$nonopt ;;
+  esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:929: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+  case $nonopt in
+  NONE) build_alias=$host_alias ;;
+  *) build_alias=$nonopt ;;
+  esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+  test "$program_prefix$program_suffix$program_transform_name" = \
+    NONENONEs,x,x, &&
+  program_prefix=${target_alias}-
+
+
+# This works around an automake problem.
+mkinstalldirs="`cd $ac_aux_dir && pwd`/mkinstalldirs"
 
-PACKAGE=boehm-gc
 
-VERSION=5.1
+
+PACKAGE=gc
+
+VERSION=6.0
 
 if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
   { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
@@ -943,7 +965,7 @@ fi
 
 missing_dir=`cd $ac_aux_dir && pwd`
 echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:947: checking for working aclocal" >&5
+echo "configure:969: checking for working aclocal" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -956,7 +978,7 @@ else
 fi
 
 echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:960: checking for working autoconf" >&5
+echo "configure:982: checking for working autoconf" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -969,7 +991,7 @@ else
 fi
 
 echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:973: checking for working automake" >&5
+echo "configure:995: checking for working automake" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -982,7 +1004,7 @@ else
 fi
 
 echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:986: checking for working autoheader" >&5
+echo "configure:1008: checking for working autoheader" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -995,7 +1017,7 @@ else
 fi
 
 echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:999: checking for working makeinfo" >&5
+echo "configure:1021: checking for working makeinfo" >&5
 # Run test in a subshell; some versions of sh will print an error if
 # an executable is not found, even if stderr is redirected.
 # Redirect stdin to placate older versions of autoconf.  Sigh.
@@ -1021,7 +1043,7 @@ fi
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1025: checking for $ac_word" >&5
+echo "configure:1047: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1051,7 +1073,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1055: checking for $ac_word" >&5
+echo "configure:1077: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1100,7 +1122,7 @@ fi
 fi
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1104: checking whether we are using GNU C" >&5
+echo "configure:1126: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1109,7 +1131,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1113: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1135: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1124,7 +1146,7 @@ if test $ac_cv_prog_gcc = yes; then
   ac_save_CFLAGS="$CFLAGS"
   CFLAGS=
   echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1128: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1150: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1161,7 +1183,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1165: checking for $ac_word" >&5
+echo "configure:1187: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1194,7 +1216,7 @@ test -n "$CXX" || CXX="gcc"
 test -z "$CXX" && { echo "configure: error: no acceptable c++ found in \$PATH" 1>&2; exit 1; }
 
 echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:1198: checking whether we are using GNU C++" >&5
+echo "configure:1220: checking whether we are using GNU C++" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1203,7 +1225,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1207: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1229: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gxx=yes
 else
   ac_cv_prog_gxx=no
@@ -1218,7 +1240,7 @@ if test $ac_cv_prog_gxx = yes; then
   ac_save_CXXFLAGS="$CXXFLAGS"
   CXXFLAGS=
   echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:1222: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:1244: checking whether ${CXX-g++} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1251,7 +1273,7 @@ fi
 # NEWLIB_CONFIGURE, which doesn't work because that means that it will
 # be run before AC_CANONICAL_HOST.
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1255: checking build system type" >&5
+echo "configure:1277: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -1272,7 +1294,7 @@ echo "$ac_t""$build" 1>&6
 # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
 set dummy ${ac_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1276: checking for $ac_word" >&5
+echo "configure:1298: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1304,7 +1326,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1308: checking for $ac_word" >&5
+echo "configure:1330: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1336,7 +1358,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1340: checking for $ac_word" >&5
+echo "configure:1362: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1368,7 +1390,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1372: checking for $ac_word" >&5
+echo "configure:1394: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1413,7 +1435,7 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1417: checking for a BSD compatible install" >&5
+echo "configure:1439: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1467,7 +1489,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1471: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:1493: checking whether to enable maintainer-specific portions of Makefiles" >&5
     # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -1498,10 +1520,14 @@ fi
 # automake happy, but we don't execute it, since we don't care about
 # the result.
 if false; then
+  # autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
+  # to nothing, so nothing would remain between `then' and `fi' if it
+  # were not for the `:' below.
+  :
   
 
 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1505: checking for executable suffix" >&5
+echo "configure:1531: checking for executable suffix" >&5
 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1511,7 +1537,7 @@ else
   rm -f conftest*
   echo 'int main () { return 0; }' > conftest.$ac_ext
   ac_cv_exeext=
-  if { (eval echo configure:1515: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+  if { (eval echo configure:1541: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
     for file in conftest.*; do
       case $file in
       *.c | *.o | *.obj) ;;
@@ -1533,23 +1559,22 @@ ac_exeext=$EXEEXT
 
 fi
 
-. ${boehm_gc_basedir}/configure.host
+. ${srcdir}/configure.host
 
-case ${boehm_gc_basedir} in
-/* | A-Za-z:/\\*) boehm_gc_flagbasedir=${boehm_gc_basedir} ;;
-*) boehm_gc_flagbasedir='$(top_builddir)/'${boehm_gc_basedir} ;;
+case ${gc_basedir} in
+/* | A-Za-z:/\\*) gc_flagbasedir=${gc_basedir} ;;
+*) gc_flagbasedir='$(top_builddir)/'${gc_basedir} ;;
 esac
 
-boehm_gc_cflags="${boehm_gc_cflags} -I"'$(top_builddir)'"/./targ-include -I${boehm_gc_flagbasedir}/libc/include"
+gc_cflags="${gc_cflags} -I"'$(top_builddir)'"/./targ-include -I${gc_flagbasedir}/libc/include"
 case "${host}" in
   *-*-cygwin32*)
-    boehm_gc_cflags="${boehm_gc_cflags} -I${boehm_gc_flagbasedir}/../winsup/include"
+    gc_cflags="${gc_cflags} -I${gc_flagbasedir}/../winsup/include"
     ;;
 esac
 
-boehm_gc_cflags="${boehm_gc_cflags} -fno-builtin"
 
-BOEHM_GC_CFLAGS=${boehm_gc_cflags}
+GC_CFLAGS=${gc_cflags}
 
 
 
@@ -1634,7 +1659,7 @@ ac_prog=ld
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
   echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1638: checking for ld used by GCC" >&5
+echo "configure:1663: checking for ld used by GCC" >&5
   case $host in
   *-*-mingw*)
     # gcc leaves a trailing carriage return which upsets mingw
@@ -1664,10 +1689,10 @@ echo "configure:1638: checking for ld used by GCC" >&5
   esac
 elif test "$with_gnu_ld" = yes; then
   echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1668: checking for GNU ld" >&5
+echo "configure:1693: checking for GNU ld" >&5
 else
   echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1671: checking for non-GNU ld" >&5
+echo "configure:1696: checking for non-GNU ld" >&5
 fi
 if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1702,7 +1727,7 @@ else
 fi
 test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1706: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1731: checking if the linker ($LD) is GNU ld" >&5
 if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1719,7 +1744,7 @@ with_gnu_ld=$lt_cv_prog_gnu_ld
 
 
 echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1723: checking for $LD option to reload object files" >&5
+echo "configure:1748: checking for $LD option to reload object files" >&5
 if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1731,7 +1756,7 @@ reload_flag=$lt_cv_ld_reload_flag
 test -n "$reload_flag" && reload_flag=" $reload_flag"
 
 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1735: checking for BSD-compatible nm" >&5
+echo "configure:1760: checking for BSD-compatible nm" >&5
 if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1769,7 +1794,7 @@ NM="$lt_cv_path_NM"
 echo "$ac_t""$NM" 1>&6
 
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1773: checking whether ln -s works" >&5
+echo "configure:1798: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1790,7 +1815,7 @@ else
 fi
 
 echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:1794: checking how to recognise dependant libraries" >&5
+echo "configure:1819: checking how to recognise dependant libraries" >&5
 if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1891,7 +1916,7 @@ irix5* | irix6*)
 # This must be Linux ELF.
 linux-gnu*)
   case $host_cpu in
-  alpha* | i*86 | powerpc* | sparc* | ia64* )
+  alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
     lt_cv_deplibs_check_method=pass_all ;;
   *)
     # glibc up to 2.1.1 does not perform some relocations on ARM
@@ -1930,6 +1955,10 @@ solaris*)
   lt_cv_file_magic_test_file=/lib/libc.so
   ;;
 
+sysv5uw[78]* | sysv4*uw2*)
+  lt_cv_deplibs_check_method=pass_all
+  ;;
+
 sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
   case $host_vendor in
   ncr)
@@ -1950,13 +1979,13 @@ file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 
 echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:1954: checking for object suffix" >&5
+echo "configure:1983: checking for object suffix" >&5
 if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   rm -f conftest*
 echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:1960: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1989: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   for ac_file in conftest.*; do
     case $ac_file in
     *.c) ;;
@@ -1980,7 +2009,7 @@ case $deplibs_check_method in
 file_magic*)
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
     echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:1984: checking for ${ac_tool_prefix}file" >&5
+echo "configure:2013: checking for ${ac_tool_prefix}file" >&5
 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2042,7 +2071,7 @@ fi
 if test -z "$lt_cv_path_MAGIC_CMD"; then
   if test -n "$ac_tool_prefix"; then
     echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2046: checking for file" >&5
+echo "configure:2075: checking for file" >&5
 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2113,7 +2142,7 @@ esac
 # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2117: checking for $ac_word" >&5
+echo "configure:2146: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2145,7 +2174,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2149: checking for $ac_word" >&5
+echo "configure:2178: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2180,7 +2209,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2184: checking for $ac_word" >&5
+echo "configure:2213: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2212,7 +2241,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2216: checking for $ac_word" >&5
+echo "configure:2245: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2279,8 +2308,8 @@ test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
 case $host in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 2283 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:2284: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  echo '#line 2312 "configure"' > conftest.$ac_ext
+  if { (eval echo configure:2313: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     case `/usr/bin/file conftest.$ac_objext` in
     *32-bit*)
       LD="${LD-ld} -32"
@@ -2301,7 +2330,7 @@ case $host in
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2305: checking whether the C compiler needs -belf" >&5
+echo "configure:2334: checking whether the C compiler needs -belf" >&5
 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2314,14 +2343,14 @@ ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$a
 cross_compiling=$ac_cv_prog_cc_cross
 
      cat > conftest.$ac_ext <<EOF
-#line 2318 "configure"
+#line 2347 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:2325: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2354: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_cc_needs_belf=yes
 else
@@ -2351,7 +2380,7 @@ echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
 esac
 
 echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
-echo "configure:2355: checking how to run the C++ preprocessor" >&5
+echo "configure:2384: checking how to run the C++ preprocessor" >&5
 if test -z "$CXXCPP"; then
 if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2364,12 +2393,12 @@ ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftes
 cross_compiling=$ac_cv_prog_cxx_cross
   CXXCPP="${CXX-g++} -E"
   cat > conftest.$ac_ext <<EOF
-#line 2368 "configure"
+#line 2397 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2373: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2402: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2516,7 +2545,7 @@ fi
 
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:2520: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:2549: checking whether to enable maintainer-specific portions of Makefiles" >&5
     # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -2541,11 +2570,15 @@ fi
 # automake wants to see AC_EXEEXT.  But we don't need it.  And having
 # it is actually a problem, because the compiler we're passed can't
 # necessarily do a full link.  So we fool automake here.
-if test "x" = "y"; then
-   
+if false; then
+  # autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
+  # to nothing, so nothing would remain between `then' and `fi' if it
+  # were not for the `:' below.
+  :
+  
 
 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:2549: checking for executable suffix" >&5
+echo "configure:2582: checking for executable suffix" >&5
 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2555,7 +2588,7 @@ else
   rm -f conftest*
   echo 'int main () { return 0; }' > conftest.$ac_ext
   ac_cv_exeext=
-  if { (eval echo configure:2559: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+  if { (eval echo configure:2592: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
     for file in conftest.*; do
       case $file in
       *.c | *.o | *.obj) ;;
@@ -2578,11 +2611,26 @@ ac_exeext=$EXEEXT
 fi
 
 echo $ac_n "checking for thread model used by GCC""... $ac_c" 1>&6
-echo "configure:2582: checking for thread model used by GCC" >&5
+echo "configure:2615: checking for thread model used by GCC" >&5
 THREADS=`$CC -v 2>&1 | sed -n 's/^Thread model: //p'`
+if test -z "$THREADS"; then
+   THREADS=no
+fi
 echo "$ac_t""$THREADS" 1>&6
 
-INCLUDES=
+# Check whether --enable-parallel-mark or --disable-parallel-mark was given.
+if test "${enable_parallel_mark+set}" = set; then
+  enableval="$enable_parallel_mark"
+  case "$THREADS" in
+      no | none | single)
+       { echo "configure: error: Parallel mark requires --enable-threads=x spec" 1>&2; exit 1; }
+       ;;
+    esac
+
+fi
+
+
+INCLUDES=-I${srcdir}/include
 THREADLIBS=
 case "$THREADS" in
  no | none | single)
@@ -2592,9 +2640,29 @@ case "$THREADS" in
     THREADS=posix
     THREADLIBS=-lpthread
     case "$host" in
+     x86-*-linux* | ia64-*-linux* | i586-*-linux* | i686-*-linux*)
+       cat >> confdefs.h <<\EOF
+#define GC_LINUX_THREADS 1
+EOF
+
+       cat >> confdefs.h <<\EOF
+#define _REENTRANT 1
+EOF
+
+        if test "${enable_parallel_mark}"; then
+         cat >> confdefs.h <<\EOF
+#define PARALLEL_MARK 1
+EOF
+
+       fi
+       cat >> confdefs.h <<\EOF
+#define THREAD_LOCAL_ALLOC 1
+EOF
+
+       ;;
      *-*-linux*)
        cat >> confdefs.h <<\EOF
-#define LINUX_THREADS 1
+#define GC_LINUX_THREADS 1
 EOF
 
        cat >> confdefs.h <<\EOF
@@ -2602,34 +2670,69 @@ EOF
 EOF
 
        ;;
+     *-*-hpux*)
+       echo "configure: warning: "Only HP/UX 11 threads are supported."" 1>&2
+       cat >> confdefs.h <<\EOF
+#define GC_HPUX_THREADS 1
+EOF
+
+       cat >> confdefs.h <<\EOF
+#define _POSIX_C_SOURCE 199506L
+EOF
+
+       if test "${enable_parallel_mark}" = yes; then
+         cat >> confdefs.h <<\EOF
+#define PARALLEL_MARK 1
+EOF
+
+       fi
+       cat >> confdefs.h <<\EOF
+#define THREAD_LOCAL_ALLOC 1
+EOF
+
+       THREADLIBS="-lpthread -lrt"
+       ;;
      *-*-freebsd*)
        echo "configure: warning: "FreeBSD does not yet fully support threads with Boehm GC."" 1>&2
        cat >> confdefs.h <<\EOF
-#define FREEBSD_THREADS 1
+#define GC_FREEBSD_THREADS 1
 EOF
 
-       INCLUDES=-pthread
+       INCLUDES="$INCLUDES -pthread"
        THREADLIBS=-pthread
        ;;
      *-*-solaris*)
        cat >> confdefs.h <<\EOF
-#define SOLARIS_THREADS 1
+#define GC_SOLARIS_THREADS 1
 EOF
 
        cat >> confdefs.h <<\EOF
-#define _SOLARIS_PTHREADS 1
+#define GC_SOLARIS_PTHREADS 1
 EOF
 
        ;;
      *-*-irix*)
        cat >> confdefs.h <<\EOF
-#define IRIX_THREADS 1
+#define GC_IRIX_THREADS 1
 EOF
 
        ;;
+     *-*-cygwin*)
+       THREADLIBS=
+       ;;
     esac
     ;;
- decosf1 | irix | mach | os2 | solaris | win32 | dce | vxworks)
+ win32)
+    cat >> confdefs.h <<\EOF
+#define GC_WIN32_THREADS 1
+EOF
+
+    cat >> confdefs.h <<\EOF
+#define NO_GETENV 1
+EOF
+
+    ;;
+ decosf1 | irix | mach | os2 | solaris | dce | vxworks)
     { echo "configure: error: thread package $THREADS not yet supported" 1>&2; exit 1; }
     ;;
  *)
@@ -2639,7 +2742,7 @@ esac
 
 
 echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:2643: checking for dlopen in -ldl" >&5
+echo "configure:2746: checking for dlopen in -ldl" >&5
 ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2647,7 +2750,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-ldl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2651 "configure"
+#line 2754 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -2658,7 +2761,7 @@ int main() {
 dlopen()
 ; return 0; }
 EOF
-if { (eval echo configure:2662: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2765: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2680,19 +2783,8 @@ fi
 
 
 
-# Check whether --enable-java-gc or --disable-java-gc was given.
-if test "${enable_java_gc+set}" = set; then
-  enableval="$enable_java_gc"
-  
-  GC=$enableval
-else
-  GC=boehm
-fi
+target_all=libgcjgc.la
 
-target_all=
-if test "$GC" = "boehm"; then
-   target_all=libgcjgc.la
-fi
 
 
 TARGET_ECOS="no"
@@ -2725,11 +2817,44 @@ esac
 
 machdep=
 case "$host" in
-# alpha_mach_dep.s assumes that pointers are not saved in fp registers.
-# Gcc on a 21264 can spill pointers to fp registers.  Oops.
-# alpha*-*-*)
-#    machdep="alpha_mach_dep.lo"
-#    ;;
+ alpha*-*-openbsd*)
+    machdep="alpha_mach_dep.lo"
+    if test x"${ac_cv_lib_dl_dlopen}" != xyes ; then
+       echo "configure: warning: OpenBSD/Alpha without dlopen(). Shared library support is disabled" 1>&2
+       # Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+  enableval="$enable_shared"
+  p=${PACKAGE-default}
+case $enableval in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+  enable_shared=no
+  # Look at the argument we got.  We use all the common list separators.
+  IFS="${IFS=  }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+  for pkg in $enableval; do
+    if test "X$pkg" = "X$p"; then
+      enable_shared=yes
+    fi
+  done
+  IFS="$ac_save_ifs"
+  ;;
+esac
+else
+  enable_shared=no
+fi
+
+    fi
+    ;;
+ alpha*-*-*)
+    machdep="alpha_mach_dep.lo"
+    ;;
+ i?86-*-solaris2.[89]*)
+    cat >> confdefs.h <<\EOF
+#define SOLARIS25_PROC_VDB_BUG_FIXED 1
+EOF
+
+    ;;
  mipstx39-*-elf*)
     machdep="mips_ultrix_mach_dep.lo"
     cat >> confdefs.h <<\EOF
@@ -2752,11 +2877,18 @@ EOF
 
     ;;
  sparc-sun-solaris2.3*)
+    machdep="sparc_mach_dep.lo"
     cat >> confdefs.h <<\EOF
 #define SUNOS53_SHARED_LIB 1
 EOF
 
     ;;
+ sparc-sun-solaris2.*)
+    machdep="sparc_mach_dep.lo"
+    ;;
+ ia64-*-*)
+    machdep="mach_dep.lo ia64_save_regs_in_stack.lo"
+    ;;
 esac
 if test x"$machdep" = x; then
    machdep="mach_dep.lo"
@@ -2794,6 +2926,15 @@ cat >> confdefs.h <<\EOF
 EOF
 
 cat >> confdefs.h <<\EOF
+#define NO_EXECUTE_PERMISSION 1
+EOF
+
+cat >> confdefs.h <<\EOF
+#define ALL_INTERIOR_POINTERS 1
+EOF
+
+
+cat >> confdefs.h <<\EOF
 #define JAVA_FINALIZATION 1
 EOF
 
@@ -2801,6 +2942,10 @@ cat >> confdefs.h <<\EOF
 #define GC_GCJ_SUPPORT 1
 EOF
 
+cat >> confdefs.h <<\EOF
+#define ATOMIC_UNCOLLECTABLE 1
+EOF
+
 
 if test -n "${with_cross_host}"; then
    cat >> confdefs.h <<\EOF
@@ -2808,21 +2953,49 @@ if test -n "${with_cross_host}"; then
 EOF
 
    cat >> confdefs.h <<\EOF
-#define NO_CLOCK 1
+#define NO_DEBUGGING 1
 EOF
 
-   cat >> confdefs.h <<\EOF
-#define SMALL_CONFIG 1
+fi
+
+# Check whether --enable-full-debug or --disable-full-debug was given.
+if test "${enable_full_debug+set}" = set; then
+  enableval="$enable_full_debug"
+   if test "$enable_full_debug" = "yes"; then
+    echo "configure: warning: "Must define GC_DEBUG and use debug alloc. in clients."" 1>&2
+    cat >> confdefs.h <<\EOF
+#define KEEP_BACK_PTRS 1
 EOF
 
-   cat >> confdefs.h <<\EOF
-#define NO_DEBUGGING 1
+    cat >> confdefs.h <<\EOF
+#define DBG_HDRS_ALL 1
 EOF
 
+    case $host in
+      ia64-*-linux* )
+       cat >> confdefs.h <<\EOF
+#define MAKE_BACK_GRAPH 1
+EOF
+
+      ;;
+      x86-*-linux* | i586-*-linux* | i686-*-linux* )
+       cat >> confdefs.h <<\EOF
+#define MAKE_BACK_GRAPH 1
+EOF
+
+       echo "configure: warning: "Client must not use -fomit-frame-pointer."" 1>&2
+       cat >> confdefs.h <<\EOF
+#define SAVE_CALL_COUNT 8
+EOF
+
+      ;;
+    esac 
+  fi
 fi
 
 
 
+
 if test -z "$with_cross_host"; then
   USE_LIBDIR_TRUE=
   USE_LIBDIR_FALSE='#'
@@ -2950,7 +3123,7 @@ done
 ac_given_srcdir=$srcdir
 ac_given_INSTALL="$INSTALL"
 
-trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "Makefile include/Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
 EOF
 cat >> $CONFIG_STATUS <<EOF
 
@@ -2982,6 +3155,7 @@ s%@includedir@%$includedir%g
 s%@oldincludedir@%$oldincludedir%g
 s%@infodir@%$infodir%g
 s%@mandir@%$mandir%g
+s%@gc_basedir@%$gc_basedir%g
 s%@host@%$host%g
 s%@host_alias@%$host_alias%g
 s%@host_cpu@%$host_cpu%g
@@ -2997,7 +3171,7 @@ s%@build_alias@%$build_alias%g
 s%@build_cpu@%$build_cpu%g
 s%@build_vendor@%$build_vendor%g
 s%@build_os@%$build_os%g
-s%@boehm_gc_basedir@%$boehm_gc_basedir%g
+s%@mkinstalldirs@%$mkinstalldirs%g
 s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
 s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
 s%@INSTALL_DATA@%$INSTALL_DATA%g
@@ -3018,7 +3192,7 @@ s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
 s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
 s%@MAINT@%$MAINT%g
 s%@EXEEXT@%$EXEEXT%g
-s%@BOEHM_GC_CFLAGS@%$BOEHM_GC_CFLAGS%g
+s%@GC_CFLAGS@%$GC_CFLAGS%g
 s%@LN_S@%$LN_S%g
 s%@OBJEXT@%$OBJEXT%g
 s%@STRIP@%$STRIP%g
@@ -3074,7 +3248,7 @@ EOF
 
 cat >> $CONFIG_STATUS <<EOF
 
-CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+CONFIG_FILES=\${CONFIG_FILES-"Makefile include/Makefile"}
 EOF
 cat >> $CONFIG_STATUS <<\EOF
 for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
@@ -3141,7 +3315,7 @@ target=${target}
 with_multisubdir=${with_multisubdir}
 ac_configure_args="${multilib_arg} ${ac_configure_args}"
 CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
-boehm_gc_basedir=${boehm_gc_basedir}
+gc_basedir=${gc_basedir}
 CC="${CC}"
 DEFS="$DEFS"
 
@@ -3151,7 +3325,7 @@ cat >> $CONFIG_STATUS <<\EOF
 echo "$DEFS" > boehm-cflags
 
 if test -n "$CONFIG_FILES"; then
-  ac_file=Makefile . ${boehm_gc_basedir}/../config-ml.in
+  ac_file=Makefile . ${gc_basedir}/../config-ml.in
 fi
 exit 0
 EOF