ac_help="$ac_help
--with-ecos enable runtime eCos target support"
ac_help="$ac_help
+ --enable-shared[=PKGS] build shared libraries [default=no]"
+ac_help="$ac_help
--enable-full-debug include full support for pointer backtracing etc."
# Initialize some variables set by options.
+# This works around the fact that libtool configuration may change LD
+# for this particular configuration, but some shells, instead of
+# keeping the changes in LD private, export them just because LD is
+# exported.
+ORIGINAL_LD_FOR_MULTILIBS=$LD
+
ac_aux_dir=
for ac_dir in . $srcdir/.; do
if test -f $ac_dir/install-sh; then
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:589: checking for a BSD compatible install" >&5
+echo "configure:597: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:642: checking whether build environment is sane" >&5
+echo "configure:650: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:699: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:707: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
fi
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:732: checking for Cygwin environment" >&5
+echo "configure:740: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 737 "configure"
+#line 745 "configure"
#include "confdefs.h"
int main() {
return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:748: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:756: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:765: checking for mingw32 environment" >&5
+echo "configure:773: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 770 "configure"
+#line 778 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:777: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:785: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:888: checking host system type" >&5
+echo "configure:896: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:909: checking target system type" >&5
+echo "configure:917: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:927: checking build system type" >&5
+echo "configure:935: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# This works around an automake problem.
-mkinstalldirs="`cd $ac_aux_dir && pwd`/mkinstalldirs"
+mkinstalldirs="`cd $ac_aux_dir && ${PWDCMD-pwd}`/mkinstalldirs"
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:967: checking for working aclocal" >&5
+echo "configure:975: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:980: checking for working autoconf" >&5
+echo "configure:988: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:993: checking for working automake" >&5
+echo "configure:1001: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1006: checking for working autoheader" >&5
+echo "configure:1014: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1019: checking for working makeinfo" >&5
+echo "configure:1027: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1045: checking for $ac_word" >&5
+echo "configure:1053: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1075: checking for $ac_word" >&5
+echo "configure:1083: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1124: checking whether we are using GNU C" >&5
+echo "configure:1132: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1133: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1141: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1148: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1156: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1185: checking for $ac_word" >&5
+echo "configure:1193: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -z "$CXX" && { echo "configure: error: no acceptable c++ found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:1218: checking whether we are using GNU C++" >&5
+echo "configure:1226: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1227: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1235: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gxx=yes
else
ac_cv_prog_gxx=no
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:1242: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:1250: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# NEWLIB_CONFIGURE, which doesn't work because that means that it will
# be run before AC_CANONICAL_HOST.
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1275: checking build system type" >&5
+echo "configure:1283: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
set dummy ${ac_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1296: checking for $ac_word" >&5
+echo "configure:1304: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1328: checking for $ac_word" >&5
+echo "configure:1336: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1360: checking for $ac_word" >&5
+echo "configure:1368: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1392: checking for $ac_word" >&5
+echo "configure:1400: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1437: checking for a BSD compatible install" >&5
+echo "configure:1445: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1491: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:1499: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1529: checking for executable suffix" >&5
+echo "configure:1537: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:1539: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:1547: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj) ;;
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1661: checking for ld used by GCC" >&5
+echo "configure:1669: checking for ld used by GCC" >&5
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1691: checking for GNU ld" >&5
+echo "configure:1699: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1694: checking for non-GNU ld" >&5
+echo "configure:1702: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1729: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1737: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1746: checking for $LD option to reload object files" >&5
+echo "configure:1754: checking for $LD option to reload object files" >&5
if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$reload_flag" && reload_flag=" $reload_flag"
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1758: checking for BSD-compatible nm" >&5
+echo "configure:1766: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""$NM" 1>&6
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1796: checking whether ln -s works" >&5
+echo "configure:1804: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:1817: checking how to recognise dependant libraries" >&5
+echo "configure:1825: checking how to recognise dependant libraries" >&5
if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
;;
hpux10.20*|hpux11*)
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ case $host_cpu in
+ hppa*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+ ia64*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so
+ ;;
+ esac
;;
irix5* | irix6*)
# This must be Linux ELF.
linux-gnu*)
case $host_cpu in
- alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
+ alpha* | mips* | hppa* | i*86 | powerpc* | sparc* | ia64* )
lt_cv_deplibs_check_method=pass_all ;;
*)
# glibc up to 2.1.1 does not perform some relocations on ARM
deplibs_check_method=$lt_cv_deplibs_check_method
echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:1981: checking for object suffix" >&5
+echo "configure:1998: checking for object suffix" >&5
if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:1987: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2004: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
for ac_file in conftest.*; do
case $ac_file in
*.c) ;;
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2011: checking for ${ac_tool_prefix}file" >&5
+echo "configure:2028: checking for ${ac_tool_prefix}file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2073: checking for file" >&5
+echo "configure:2090: checking for file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2144: checking for $ac_word" >&5
+echo "configure:2161: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2176: checking for $ac_word" >&5
+echo "configure:2193: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2211: checking for $ac_word" >&5
+echo "configure:2228: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2243: checking for $ac_word" >&5
+echo "configure:2260: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case $host in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 2310 "configure"' > conftest.$ac_ext
- if { (eval echo configure:2311: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 2327 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:2328: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ if test "$lt_cv_prog_gnu_ld" = yes; then
+ case `/usr/bin/file conftest.$ac_objext` in
+ *32-bit*)
+ LD="${LD-ld} -melf32bsmip"
+ ;;
+ *N32*)
+ LD="${LD-ld} -melf32bmipn32"
+ ;;
+ *64-bit*)
+ LD="${LD-ld} -melf64bmip"
+ ;;
+ esac
+ else
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -32"
LD="${LD-ld} -64"
;;
esac
+ fi
+ fi
+ rm -rf conftest*
+ ;;
+
+ia64-*-hpux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo configure:2361: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case "`/usr/bin/file conftest.o`" in
+ *ELF-32*)
+ HPUX_IA64_MODE="32"
+ ;;
+ *ELF-64*)
+ HPUX_IA64_MODE="64"
+ ;;
+ esac
+ fi
+ rm -rf conftest*
+ ;;
+
+x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*)
+ # Find out which ABI we are using.
+ echo 'int i;' > conftest.$ac_ext
+ if { (eval echo configure:2377: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case "`/usr/bin/file conftest.o`" in
+ *32-bit*)
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_i386"
+ ;;
+ ppc64-*linux*)
+ LD="${LD-ld} -m elf32ppclinux"
+ ;;
+ s390x-*linux*)
+ LD="${LD-ld} -m elf_s390"
+ ;;
+ sparc64-*linux*)
+ LD="${LD-ld} -m elf32_sparc"
+ ;;
+ esac
+ ;;
+ *64-bit*)
+ case $host in
+ x86_64-*linux*)
+ LD="${LD-ld} -m elf_x86_64"
+ ;;
+ ppc*-*linux*|powerpc*-*linux*)
+ LD="${LD-ld} -m elf64ppc"
+ ;;
+ s390*-*linux*)
+ LD="${LD-ld} -m elf64_s390"
+ ;;
+ sparc*-*linux*)
+ LD="${LD-ld} -m elf64_sparc"
+ ;;
+ esac
+ ;;
+ esac
fi
rm -rf conftest*
;;
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2332: checking whether the C compiler needs -belf" >&5
+echo "configure:2421: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 2345 "configure"
+#line 2434 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2441: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
esac
echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
-echo "configure:2382: checking how to run the C++ preprocessor" >&5
+echo "configure:2471: checking how to run the C++ preprocessor" >&5
if test -z "$CXXCPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
CXXCPP="${CXX-g++} -E"
cat > conftest.$ac_ext <<EOF
-#line 2395 "configure"
+#line 2484 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2400: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2489: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:2547: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:2636: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:2580: checking for executable suffix" >&5
+echo "configure:2669: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:2590: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:2679: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj) ;;
fi
echo $ac_n "checking for thread model used by GCC""... $ac_c" 1>&6
-echo "configure:2613: checking for thread model used by GCC" >&5
+echo "configure:2702: checking for thread model used by GCC" >&5
THREADS=`$CC -v 2>&1 | sed -n 's/^Thread model: //p'`
if test -z "$THREADS"; then
THREADS=no
THREADS=posix
THREADLIBS=-lpthread
case "$host" in
- x86-*-linux* | ia64-*-linux* | i586-*-linux* | i686-*-linux*)
+ x86-*-linux* | ia64-*-linux* | i586-*-linux* | i686-*-linux* | x86_64-*-linux* )
cat >> confdefs.h <<\EOF
#define GC_LINUX_THREADS 1
EOF
*-*-freebsd*)
echo "configure: warning: "FreeBSD does not yet fully support threads with Boehm GC."" 1>&2
cat >> confdefs.h <<\EOF
-#define FREEBSD_THREADS 1
+#define GC_FREEBSD_THREADS 1
EOF
INCLUDES="$INCLUDES -pthread"
;;
esac
;;
- decosf1 | irix | mach | os2 | solaris | win32 | dce | vxworks)
+ win32)
+ cat >> confdefs.h <<\EOF
+#define GC_WIN32_THREADS 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define NO_GETENV 1
+EOF
+
+ ;;
+ decosf1 | irix | mach | os2 | solaris | dce | vxworks)
{ echo "configure: error: thread package $THREADS not yet supported" 1>&2; exit 1; }
;;
*)
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:2734: checking for dlopen in -ldl" >&5
+echo "configure:2833: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2742 "configure"
+#line 2841 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dlopen()
; return 0; }
EOF
-if { (eval echo configure:2753: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2852: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
target_all=libgcjgc.la
+
TARGET_ECOS="no"
# Check whether --with-ecos or --without-ecos was given.
if test "${with_ecos+set}" = set; then
machdep=
case "$host" in
+ alpha*-*-openbsd*)
+ machdep="alpha_mach_dep.lo"
+ if test x"${ac_cv_lib_dl_dlopen}" != xyes ; then
+ echo "configure: warning: OpenBSD/Alpha without dlopen(). Shared library support is disabled" 1>&2
+ # Check whether --enable-shared or --disable-shared was given.
+if test "${enable_shared+set}" = set; then
+ enableval="$enable_shared"
+ p=${PACKAGE-default}
+case $enableval in
+yes) enable_shared=yes ;;
+no) enable_shared=no ;;
+*)
+ enable_shared=no
+ # Look at the argument we got. We use all the common list separators.
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
+ for pkg in $enableval; do
+ if test "X$pkg" = "X$p"; then
+ enable_shared=yes
+ fi
+ done
+ IFS="$ac_save_ifs"
+ ;;
+esac
+else
+ enable_shared=no
+fi
+
+ fi
+ ;;
alpha*-*-*)
machdep="alpha_mach_dep.lo"
;;
mips-dec-ultrix*)
machdep="mips_ultrix_mach-dep.lo"
;;
+ mips*-*-linux*)
+ ;;
mips-*-*)
machdep="mips_sgi_mach_dep.lo"
cat >> confdefs.h <<\EOF
;;
sparc-sun-solaris2.3*)
+ machdep="sparc_mach_dep.lo"
cat >> confdefs.h <<\EOF
#define SUNOS53_SHARED_LIB 1
EOF
;;
+ sparc-sun-solaris2.*)
+ machdep="sparc_mach_dep.lo"
+ ;;
+ ia64-*-*)
+ machdep="mach_dep.lo ia64_save_regs_in_stack.lo"
+ ;;
esac
if test x"$machdep" = x; then
machdep="mach_dep.lo"
EOF
cat >> confdefs.h <<\EOF
-#define NO_CLOCK 1
-EOF
-
- cat >> confdefs.h <<\EOF
-#define SMALL_CONFIG 1
-EOF
-
- cat >> confdefs.h <<\EOF
#define NO_DEBUGGING 1
EOF
EOF
case $host in
- x86-*-linux* | i586-*-linux* | i686-*-linux* )
+ ia64-*-linux* )
+ cat >> confdefs.h <<\EOF
+#define MAKE_BACK_GRAPH 1
+EOF
+
+ ;;
+ x86-*-linux* | i586-*-linux* | i686-*-linux* | x86_64-*-linux* )
+ cat >> confdefs.h <<\EOF
+#define MAKE_BACK_GRAPH 1
+EOF
+
echo "configure: warning: "Client must not use -fomit-frame-pointer."" 1>&2
cat >> confdefs.h <<\EOF
#define SAVE_CALL_COUNT 8
fi
-
-
-if test -z "$with_cross_host"; then
- USE_LIBDIR_TRUE=
- USE_LIBDIR_FALSE='#'
+if test -n "$with_cross_host" &&
+ test x"$with_cross_host" != x"no"; then
+ toolexecdir='$(exec_prefix)/$(target_alias)'
+ toolexeclibdir='$(toolexecdir)/lib'
else
- USE_LIBDIR_TRUE='#'
- USE_LIBDIR_FALSE=
+ toolexecdir='$(libdir)/gcc-lib/$(target_alias)'
+ toolexeclibdir='$(libdir)'
fi
+multi_os_directory=`$CC -print-multi-os-directory`
+case $multi_os_directory in
+ .) ;; # Avoid trailing /.
+ *) toolexeclibdir=$toolexeclibdir/$multi_os_directory ;;
+esac
+
+
if test "${multilib}" = "yes"; then
multilib_arg="--enable-multilib"
# Transform confdefs.h into DEFS.
# Protect against shell expansion while executing Makefile rules.
# Protect against Makefile macro expansion.
-cat > conftest.defs <<\EOF
-s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
-s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
-s%\[%\\&%g
-s%\]%\\&%g
-s%\$%$$%g
-EOF
-DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
-rm -f conftest.defs
+#
+# If the first sed substitution is executed (which looks for macros that
+# take arguments), then we branch to the quote section. Otherwise,
+# look for a macro that doesn't take arguments.
+cat >confdef2opt.sed <<\_ACEOF
+t clear
+: clear
+s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\),-D\1=\2,g
+t quote
+s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\),-D\1=\2,g
+t quote
+d
+: quote
+s,[ `~#$^&*(){}\\|;'"<>?],\\&,g
+s,\[,\\&,g
+s,\],\\&,g
+s,\$,$$,g
+p
+_ACEOF
+# We use echo to avoid assuming a particular line-breaking character.
+# The extra dot is to prevent the shell from consuming trailing
+# line-breaks from the sub-command output. A line-break within
+# single-quotes doesn't work because, if this script is created in a
+# platform that uses two characters for line-breaks (e.g., DOS), tr
+# would break.
+ac_LF_and_DOT=`echo; echo .`
+DEFS=`sed -n -f confdef2opt.sed confdefs.h | tr "$ac_LF_and_DOT" ' .'`
+rm -f confdef2opt.sed
# Without the "./", some shells look in PATH for config.status.
s%@CXXINCLUDES@%$CXXINCLUDES%g
s%@addobjs@%$addobjs%g
s%@MY_CFLAGS@%$MY_CFLAGS%g
-s%@USE_LIBDIR_TRUE@%$USE_LIBDIR_TRUE%g
-s%@USE_LIBDIR_FALSE@%$USE_LIBDIR_FALSE%g
+s%@toolexecdir@%$toolexecdir%g
+s%@toolexeclibdir@%$toolexeclibdir%g
CEOF
EOF
CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
gc_basedir=${gc_basedir}
CC="${CC}"
+ORIGINAL_LD_FOR_MULTILIBS="${ORIGINAL_LD_FOR_MULTILIBS}"
DEFS="$DEFS"
EOF
echo "$DEFS" > boehm-cflags
if test -n "$CONFIG_FILES"; then
+ LD="${ORIGINAL_LD_FOR_MULTILIBS}"
ac_file=Makefile . ${gc_basedir}/../config-ml.in
fi
exit 0