ac_help="$ac_help
--disable-libtool-lock avoid locking (might break parallel builds)"
ac_help="$ac_help
+ --with-pic try to use only PIC/non-PIC objects [default=use both]"
+ac_help="$ac_help
--with-target-subdir=SUBDIR
configuring with a cross compiler"
ac_help="$ac_help
--enable-maintainer-mode enable make rules and dependencies not useful
(and sometimes confusing) to the casual installer"
ac_help="$ac_help
- --enable-threads=TYPE choose threading package"
-ac_help="$ac_help
--enable-java-gc=TYPE choose garbage collector [boehm]"
ac_help="$ac_help
--with-ecos enable runtime eCos target support"
# A filename unique to this package, relative to the directory that
# configure is in, which we can look for to find out if srcdir is correct.
-ac_unique_file=gc_mark.h
+ac_unique_file=gcj_mlc.c
# Find the source files, if location was not specified.
if test -z "$srcdir"; then
-ac_aux_dir=
-for ac_dir in .. $srcdir/..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in .. $srcdir/.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-# configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-# same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-# as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:603: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
- case $nonopt in
- NONE)
- if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
- fi ;;
- *) host_alias=$nonopt ;;
- esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:624: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
- case $nonopt in
- NONE) target_alias=$host_alias ;;
- *) target_alias=$nonopt ;;
- esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:642: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
- case $nonopt in
- NONE) build_alias=$host_alias ;;
- *) build_alias=$nonopt ;;
- esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
- test "$program_prefix$program_suffix$program_transform_name" = \
- NONENONEs,x,x, &&
- program_prefix=${target_alias}-
-
-
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:677: checking for a BSD compatible install" >&5
+echo "configure:567: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:730: checking whether build environment is sane" >&5
+echo "configure:620: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:787: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:677: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
fi
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:820: checking for Cygwin environment" >&5
+echo "configure:710: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 825 "configure"
+#line 715 "configure"
#include "confdefs.h"
int main() {
return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:836: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:726: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:853: checking for mingw32 environment" >&5
+echo "configure:743: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 858 "configure"
+#line 748 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:865: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:755: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
boehm_gc_basedir="${srcdir}/."
fi
+ac_aux_dir=
+for ac_dir in $boehm_gc_basedir/.. $srcdir/$boehm_gc_basedir/..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { echo "configure: error: can not find install-sh or install.sh in $boehm_gc_basedir/.. $srcdir/$boehm_gc_basedir/.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+if :; then :; else
+ # This overrides the previous occurrence for automake, but not for
+ # autoconf, which is exactly what we want.
+ ac_aux_dir=
+for ac_dir in .. $srcdir/..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { echo "configure: error: can not find install-sh or install.sh in .. $srcdir/.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+fi
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+# configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+# same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+# as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
# Make sure we can run config.sub.
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:913: checking host system type" >&5
+echo "configure:866: checking host system type" >&5
host_alias=$host
case "$host_alias" in
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:887: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+ case $nonopt in
+ NONE) target_alias=$host_alias ;;
+ *) target_alias=$nonopt ;;
+ esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:905: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+
PACKAGE=boehm-gc
-VERSION=4.13a2
+VERSION=5.1
if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
{ echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:947: checking for working aclocal" >&5
+echo "configure:941: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:960: checking for working autoconf" >&5
+echo "configure:954: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:973: checking for working automake" >&5
+echo "configure:967: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:986: checking for working autoheader" >&5
+echo "configure:980: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:999: checking for working makeinfo" >&5
+echo "configure:993: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1025: checking for $ac_word" >&5
+echo "configure:1019: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1055: checking for $ac_word" >&5
+echo "configure:1049: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1104: checking whether we are using GNU C" >&5
+echo "configure:1098: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1113: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1107: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1128: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1122: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1165: checking for $ac_word" >&5
+echo "configure:1159: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -z "$CXX" && { echo "configure: error: no acceptable c++ found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:1198: checking whether we are using GNU C++" >&5
+echo "configure:1192: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1207: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1201: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gxx=yes
else
ac_cv_prog_gxx=no
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:1222: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:1216: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# NEWLIB_CONFIGURE, which doesn't work because that means that it will
# be run before AC_CANONICAL_HOST.
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1255: checking build system type" >&5
+echo "configure:1249: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
set dummy ${ac_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1276: checking for $ac_word" >&5
+echo "configure:1270: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1308: checking for $ac_word" >&5
+echo "configure:1302: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1340: checking for $ac_word" >&5
+echo "configure:1334: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1372: checking for $ac_word" >&5
+echo "configure:1366: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1417: checking for a BSD compatible install" >&5
+echo "configure:1411: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1471: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:1465: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
# automake happy, but we don't execute it, since we don't care about
# the result.
if false; then
+ # autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
+ # to nothing, so nothing would remain between `then' and `fi' if it
+ # were not for the `:' below.
+ :
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1505: checking for executable suffix" >&5
+echo "configure:1503: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:1515: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:1513: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
- *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+ *.c | *.o | *.obj) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac
done
fi
-. ${boehm_gc_basedir}/configure.host
+. ${srcdir}/configure.host
case ${boehm_gc_basedir} in
/* | A-Za-z:/\\*) boehm_gc_flagbasedir=${boehm_gc_basedir} ;;
if test "${enable_shared+set}" = set; then
enableval="$enable_shared"
p=${PACKAGE-default}
-case "$enableval" in
+case $enableval in
yes) enable_shared=yes ;;
no) enable_shared=no ;;
*)
if test "${enable_static+set}" = set; then
enableval="$enable_static"
p=${PACKAGE-default}
-case "$enableval" in
+case $enableval in
yes) enable_static=yes ;;
no) enable_static=no ;;
*)
if test "${enable_fast_install+set}" = set; then
enableval="$enable_fast_install"
p=${PACKAGE-default}
-case "$enableval" in
+case $enableval in
yes) enable_fast_install=yes ;;
no) enable_fast_install=no ;;
*)
enable_fast_install=yes
fi
-# Extract the first word of "ranlib", so it can be a program name with args.
-set dummy ranlib; ac_word=$2
-echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1629: checking for $ac_word" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- if test -n "$RANLIB"; then
- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- ac_dummy="$PATH"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$ac_word; then
- ac_cv_prog_RANLIB="ranlib"
- break
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
-fi
-fi
-RANLIB="$ac_cv_prog_RANLIB"
-if test -n "$RANLIB"; then
- echo "$ac_t""$RANLIB" 1>&6
-else
- echo "$ac_t""no" 1>&6
-fi
-
# Check whether --with-gnu-ld or --without-gnu-ld was given.
if test "${with_gnu_ld+set}" = set; then
withval="$with_gnu_ld"
fi
ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
+if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1668: checking for ld used by GCC" >&5
- ac_prog=`($CC -print-prog-name=ld) 2>&5`
- case "$ac_prog" in
+echo "configure:1636: checking for ld used by GCC" >&5
+ case $host in
+ *-*-mingw*)
+ # gcc leaves a trailing carriage return which upsets mingw
+ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
+ *)
+ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
+ esac
+ case $ac_prog in
# Accept absolute paths.
[\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1692: checking for GNU ld" >&5
+echo "configure:1666: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1695: checking for non-GNU ld" >&5
+echo "configure:1669: checking for non-GNU ld" >&5
fi
-if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then
+if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$LD"; then
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- ac_cv_path_LD="$ac_dir/$ac_prog"
+ lt_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
# Break only if it was the GNU/non-GNU ld that we prefer.
- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
+ if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
test "$with_gnu_ld" != no && break
else
test "$with_gnu_ld" != yes && break
done
IFS="$ac_save_ifs"
else
- ac_cv_path_LD="$LD" # Let the user override the test with a path.
+ lt_cv_path_LD="$LD" # Let the user override the test with a path.
fi
fi
-LD="$ac_cv_path_LD"
+LD="$lt_cv_path_LD"
if test -n "$LD"; then
echo "$ac_t""$LD" 1>&6
else
echo "$ac_t""no" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
-
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1731: checking if the linker ($LD) is GNU ld" >&5
-if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then
+echo "configure:1704: checking if the linker ($LD) is GNU ld" >&5
+if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# I'd rather use --version here, but apparently some GNU ld's only accept -v.
if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- ac_cv_prog_gnu_ld=yes
+ lt_cv_prog_gnu_ld=yes
else
- ac_cv_prog_gnu_ld=no
+ lt_cv_prog_gnu_ld=no
fi
fi
-echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6
+echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6
+with_gnu_ld=$lt_cv_prog_gnu_ld
+
+
+echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
+echo "configure:1721: checking for $LD option to reload object files" >&5
+if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_ld_reload_flag='-r'
+fi
+echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6
+reload_flag=$lt_cv_ld_reload_flag
+test -n "$reload_flag" && reload_flag=" $reload_flag"
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1747: checking for BSD-compatible nm" >&5
-if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then
+echo "configure:1733: checking for BSD-compatible nm" >&5
+if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -n "$NM"; then
# Let the user override the test.
- ac_cv_path_NM="$NM"
+ lt_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
+ tmp_nm=$ac_dir/${ac_tool_prefix}nm
+ if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
- if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -B"
+ # Tru64's nm complains that /dev/null is an invalid object file
+ if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -B"
break
- elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$ac_dir/nm -p"
+ elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
+ lt_cv_path_NM="$tmp_nm -p"
break
else
- ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but
+ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but
continue # so that we can try to find one that supports BSD flags
fi
fi
done
IFS="$ac_save_ifs"
- test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
+ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm
fi
fi
-NM="$ac_cv_path_NM"
+NM="$lt_cv_path_NM"
echo "$ac_t""$NM" 1>&6
-
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1784: checking whether ln -s works" >&5
+echo "configure:1771: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""no" 1>&6
fi
+echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
+echo "configure:1792: checking how to recognise dependant libraries" >&5
+if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ lt_cv_file_magic_cmd='$MAGIC_CMD'
+lt_cv_file_magic_test_file=
+lt_cv_deplibs_check_method='unknown'
+# Need to set the preceding variable on all platforms that support
+# interlibrary dependencies.
+# 'none' -- dependencies not supported.
+# `unknown' -- same as none, but documents that we really don't know.
+# 'pass_all' -- all dependencies passed with no checks.
+# 'test_compile' -- check by making test program.
+# 'file_magic [regex]' -- check by looking for files in library path
+# which responds to the $file_magic_cmd with a given egrep regex.
+# If you have `file' or equivalent on your system and you're not sure
+# whether `pass_all' will *always* work, you probably want this one.
+
+case $host_os in
+aix*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+beos*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+bsdi4*)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ ;;
-# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
-if test "${enable_libtool_lock+set}" = set; then
- enableval="$enable_libtool_lock"
+cygwin* | mingw* |pw32*)
+ lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
+ lt_cv_file_magic_cmd='$OBJDUMP -f'
+ ;;
+
+darwin* | rhapsody*)
+ lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library'
+ lt_cv_file_magic_cmd='/usr/bin/file -L'
+ case "$host_os" in
+ rhapsody* | darwin1.012)
+ lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System'
+ ;;
+ *) # Darwin 1.3 on
+ lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib'
+ ;;
+ esac
+ ;;
+
+freebsd* )
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ case $host_cpu in
+ i*86 )
+ # Not sure whether the presence of OpenBSD here was a mistake.
+ # Let's accept both of them until this is cleared up.
+ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
+ ;;
+ esac
+ else
+ lt_cv_deplibs_check_method=pass_all
+ fi
+ ;;
+
+gnu*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+hpux10.20*|hpux11*)
+ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libc.sl
+ ;;
+
+irix5* | irix6*)
+ case $host_os in
+ irix5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
+ ;;
+ *)
+ case $LD in
+ *-32|*"-32 ") libmagic=32-bit;;
+ *-n32|*"-n32 ") libmagic=N32;;
+ *-64|*"-64 ") libmagic=64-bit;;
+ *) libmagic=never-match;;
+ esac
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
+ ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+# This must be Linux ELF.
+linux-gnu*)
+ case $host_cpu in
+ alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
+ lt_cv_deplibs_check_method=pass_all ;;
+ *)
+ # glibc up to 2.1.1 does not perform some relocations on ARM
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
+ esac
+ lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
+ ;;
+
+netbsd*)
+ if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+ lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'
+ else
+ lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'
+ fi
+ ;;
+
+newsos6)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'
+ lt_cv_file_magic_cmd=/usr/bin/file
+ lt_cv_file_magic_test_file=/usr/lib/libnls.so
+ ;;
+
+osf3* | osf4* | osf5*)
+ # this will be overridden with pass_all, but let us keep it just in case
+ lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
+ lt_cv_file_magic_test_file=/shlib/libc.so
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sco3.2v5*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+solaris*)
+ lt_cv_deplibs_check_method=pass_all
+ lt_cv_file_magic_test_file=/lib/libc.so
+ ;;
+
+sysv5uw[78]* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
+sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
+ case $host_vendor in
+ ncr)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+ motorola)
+ lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
+ lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
+ ;;
+ esac
+ ;;
+esac
+
+fi
+
+echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6
+file_magic_cmd=$lt_cv_file_magic_cmd
+deplibs_check_method=$lt_cv_deplibs_check_method
+
+echo $ac_n "checking for object suffix""... $ac_c" 1>&6
+echo "configure:1956: checking for object suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ rm -f conftest*
+echo 'int i = 1;' > conftest.$ac_ext
+if { (eval echo configure:1962: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ for ac_file in conftest.*; do
+ case $ac_file in
+ *.c) ;;
+ *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;;
+ esac
+ done
+else
+ { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; }
+fi
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_objext" 1>&6
+OBJEXT=$ac_cv_objext
+ac_objext=$ac_cv_objext
+
+# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
+
+# Only perform the check for file, if the check method requires it
+case $deplibs_check_method in
+file_magic*)
+ if test "$file_magic_cmd" = '$MAGIC_CMD'; then
+ echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
+echo "configure:1986: checking for ${ac_tool_prefix}file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case $MAGIC_CMD in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/${ac_tool_prefix}file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$ac_t""$MAGIC_CMD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$lt_cv_path_MAGIC_CMD"; then
+ if test -n "$ac_tool_prefix"; then
+ echo $ac_n "checking for file""... $ac_c" 1>&6
+echo "configure:2048: checking for file" >&5
+if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ case $MAGIC_CMD in
+ /*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path.
+ ;;
+ ?:/*)
+ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path.
+ ;;
+ *)
+ ac_save_MAGIC_CMD="$MAGIC_CMD"
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="/usr/bin:$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/file; then
+ lt_cv_path_MAGIC_CMD="$ac_dir/file"
+ if test -n "$file_magic_test_file"; then
+ case $deplibs_check_method in
+ "file_magic "*)
+ file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
+ MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
+ egrep "$file_magic_regex" > /dev/null; then
+ :
+ else
+ cat <<EOF 1>&2
+
+*** Warning: the command libtool uses to detect shared libraries,
+*** $file_magic_cmd, produces output that libtool cannot recognize.
+*** The result is that libtool may fail to recognize shared libraries
+*** as such. This will affect the creation of libtool libraries that
+*** depend on shared libraries, but programs linked with such libtool
+*** libraries will work regardless of this problem. Nevertheless, you
+*** may want to report the problem to your system manager and/or to
+*** bug-libtool@gnu.org
+
+EOF
+ fi ;;
+ esac
+ fi
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ MAGIC_CMD="$ac_save_MAGIC_CMD"
+ ;;
+esac
+fi
+
+MAGIC_CMD="$lt_cv_path_MAGIC_CMD"
+if test -n "$MAGIC_CMD"; then
+ echo "$ac_t""$MAGIC_CMD" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ else
+ MAGIC_CMD=:
+ fi
+fi
+
+ fi
+ ;;
+esac
+
+# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2119: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_RANLIB"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2151: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ RANLIB=":"
+fi
+fi
+
+# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
+set dummy ${ac_tool_prefix}strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2186: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP="${ac_tool_prefix}strip"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_STRIP"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "strip", so it can be a program name with args.
+set dummy strip; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:2218: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$STRIP"; then
+ ac_cv_prog_STRIP="$STRIP" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_STRIP="strip"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":"
+fi
+fi
+STRIP="$ac_cv_prog_STRIP"
+if test -n "$STRIP"; then
+ echo "$ac_t""$STRIP" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ STRIP=":"
+fi
+fi
+
+
+# Check for any special flags to pass to ltconfig.
+libtool_flags="--cache-file=$cache_file"
+test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
+test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
+test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
+test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc"
+test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
+
+
+# Check whether --enable-libtool-lock or --disable-libtool-lock was given.
+if test "${enable_libtool_lock+set}" = set; then
+ enableval="$enable_libtool_lock"
:
fi
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
+# Check whether --with-pic or --without-pic was given.
+if test "${with_pic+set}" = set; then
+ withval="$with_pic"
+ pic_mode="$withval"
+else
+ pic_mode=default
+fi
+
+test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
+test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
+
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
-case "$host" in
+case $host in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 1828 "configure"' > conftest.$ac_ext
- if { (eval echo configure:1829: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
- case "`/usr/bin/file conftest.o`" in
+ echo '#line 2285 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:2286: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -32"
;;
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:1850: checking whether the C compiler needs -belf" >&5
+echo "configure:2307: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- cat > conftest.$ac_ext <<EOF
-#line 1855 "configure"
+
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ cat > conftest.$ac_ext <<EOF
+#line 2320 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1862: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2327: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
lt_cv_cc_needs_belf=no
fi
rm -f conftest*
+ ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
fi
echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6
esac
+echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
+echo "configure:2357: checking how to run the C++ preprocessor" >&5
+if test -z "$CXXCPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_ext=C
+# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CXXCPP $CPPFLAGS'
+ac_compile='${CXX-g++} -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cxx_cross
+ CXXCPP="${CXX-g++} -E"
+ cat > conftest.$ac_ext <<EOF
+#line 2370 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:2375: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CXXCPP=/lib/cpp
+fi
+rm -f conftest*
+ ac_cv_prog_CXXCPP="$CXXCPP"
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+fi
+fi
+CXXCPP="$ac_cv_prog_CXXCPP"
+echo "$ac_t""$CXXCPP" 1>&6
+
# Save cache, so that ltconfig can load it
cat > confcache <<\EOF
# Actually configure libtool. ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
-DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
+AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
+$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; }
# Reload cache, that may have been modified by ltconfig
# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh"
+LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
# Always use our own libtool.
LIBTOOL='$(SHELL) $(top_builddir)/libtool'
exec 5>>./config.log
+
+LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
+lt_save_CC="$CC"
+lt_save_CFLAGS="$CFLAGS"
+AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
+MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
+LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
+AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
+objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
+deplibs_check_method="$deplibs_check_method" \
+file_magic_cmd="$file_magic_cmd" \
+${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
+--build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
+|| { echo "configure: error: libtool tag configuration failed" 1>&2; exit 1; }
+CC="$lt_save_CC"
+CFLAGS="$lt_save_CFLAGS"
+
+# Redirect the config.log output again, so that the ltconfig log is not
+# clobbered by the next message.
+exec 5>>./config.log
+
+
+
+
+
+
+
# Check whether --with-target-subdir or --without-target-subdir was given.
if test "${with_target_subdir+set}" = set; then
withval="$with_target_subdir"
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1978: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:2522: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
# automake wants to see AC_EXEEXT. But we don't need it. And having
# it is actually a problem, because the compiler we're passed can't
# necessarily do a full link. So we fool automake here.
-if test "x" = "y"; then
-
+if false; then
+ # autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
+ # to nothing, so nothing would remain between `then' and `fi' if it
+ # were not for the `:' below.
+ :
+
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:2007: checking for executable suffix" >&5
+echo "configure:2555: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:2017: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:2565: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
- *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+ *.c | *.o | *.obj) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac
done
fi
-echo $ac_n "checking for threads package to use""... $ac_c" 1>&6
-echo "configure:2040: checking for threads package to use" >&5
-# Check whether --enable-threads or --disable-threads was given.
-if test "${enable_threads+set}" = set; then
- enableval="$enable_threads"
- THREADS=$enableval
-else
- THREADS=no
-fi
-
-
-if test "$THREADS" = yes; then
- case "$host" in
- *-*-vxworks*)
- THREADS=vxworks
- ;;
- *-*-linux*)
- # FIXME: this isn't correct in all cases.
- THREADS=posix
- ;;
- *-*-win*)
- THREADS=win32
- ;;
- *-*-irix*)
- # FIXME: for now, choose POSIX, because we implement that.
- # Later, choose irix threads.
- THREADS=posix
- ;;
- *-*-solaris*)
- # FIXME: for now, choose POSIX, because we implement that.
- # Later, choose solaris threads.
- THREADS=posix
- ;;
- *)
- # For now.
- THREADS=none
- ;;
- esac
-fi
+echo $ac_n "checking for thread model used by GCC""... $ac_c" 1>&6
+echo "configure:2588: checking for thread model used by GCC" >&5
+THREADS=`$CC -v 2>&1 | sed -n 's/^Thread model: //p'`
+echo "$ac_t""$THREADS" 1>&6
-INCLUDES=
-THREADLIB=
+INCLUDES=-I${srcdir}/include
+THREADLIBS=
case "$THREADS" in
no | none | single)
THREADS=none
;;
posix | pthreads)
THREADS=posix
+ THREADLIBS=-lpthread
case "$host" in
*-*-linux*)
cat >> confdefs.h <<\EOF
EOF
;;
+ *-*-freebsd*)
+ echo "configure: warning: "FreeBSD does not yet fully support threads with Boehm GC."" 1>&2
+ cat >> confdefs.h <<\EOF
+#define FREEBSD_THREADS 1
+EOF
+
+ INCLUDES="$INCLUDES -pthread"
+ THREADLIBS=-pthread
+ ;;
*-*-solaris*)
cat >> confdefs.h <<\EOF
#define SOLARIS_THREADS 1
;;
esac
- THREADLIB=-lpthread
;;
decosf1 | irix | mach | os2 | solaris | win32 | dce | vxworks)
{ echo "configure: error: thread package $THREADS not yet supported" 1>&2; exit 1; }
{ echo "configure: error: $THREADS is an unknown thread package" 1>&2; exit 1; }
;;
esac
-echo "$ac_t""$THREADS" 1>&6
+
+
+echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
+echo "configure:2649: checking for dlopen in -ldl" >&5
+ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldl $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 2657 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dlopen();
+
+int main() {
+dlopen()
+; return 0; }
+EOF
+if { (eval echo configure:2668: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ EXTRA_TEST_LIBS="$EXTRA_TEST_LIBS -ldl"
+else
+ echo "$ac_t""no" 1>&6
+fi
+
# Check whether --enable-java-gc or --disable-java-gc was given.
EOF
cat >> confdefs.h <<\EOF
-#define NO_DEBUGGING 1
+#define JAVA_FINALIZATION 1
EOF
cat >> confdefs.h <<\EOF
-#define JAVA_FINALIZATION 1
+#define GC_GCJ_SUPPORT 1
EOF
#define SMALL_CONFIG 1
EOF
+ cat >> confdefs.h <<\EOF
+#define NO_DEBUGGING 1
+EOF
+
fi
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
+s%@boehm_gc_basedir@%$boehm_gc_basedir%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
-s%@boehm_gc_basedir@%$boehm_gc_basedir%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@MAINT@%$MAINT%g
s%@EXEEXT@%$EXEEXT%g
s%@BOEHM_GC_CFLAGS@%$BOEHM_GC_CFLAGS%g
-s%@LD@%$LD%g
-s%@NM@%$NM%g
s%@LN_S@%$LN_S%g
+s%@OBJEXT@%$OBJEXT%g
+s%@STRIP@%$STRIP%g
s%@LIBTOOL@%$LIBTOOL%g
-s%@THREADLIB@%$THREADLIB%g
+s%@CXXCPP@%$CXXCPP%g
+s%@THREADLIBS@%$THREADLIBS%g
+s%@EXTRA_TEST_LIBS@%$EXTRA_TEST_LIBS%g
s%@target_all@%$target_all%g
s%@INCLUDES@%$INCLUDES%g
s%@CXXINCLUDES@%$CXXINCLUDES%g
OSDN Git Service
