target_triplet = @target@
AR = @AR@
AS = @AS@
-BOEHM_GC_CFLAGS = @BOEHM_GC_CFLAGS@
CC = @CC@
CPP = @CPP@
CXX = @CXX@
EXTRA_TEST_LIBS = @EXTRA_TEST_LIBS@
GCJ = @GCJ@
GCJFLAGS = @GCJFLAGS@
+GC_CFLAGS = @GC_CFLAGS@
INCLUDES = @INCLUDES@
LIBTOOL = @LIBTOOL@
LN_S = @LN_S@
THREADLIBS = @THREADLIBS@
VERSION = @VERSION@
addobjs = @addobjs@
-boehm_gc_basedir = @boehm_gc_basedir@
+gc_basedir = @gc_basedir@
+mkinstalldirs = @mkinstalldirs@
target_all = @target_all@
AUTOMAKE_OPTIONS = cygnus
+SUBDIRS = include
+
# Multilib support variables.
MULTISRCTOP =
MULTIBUILDTOP =
MULTISUBDIR =
MULTIDO = true
MULTICLEAN = true
-@USE_LIBDIR_TRUE@toolexeclibdir = @USE_LIBDIR_TRUE@$(libdir)$(MULTISUBDIR)
-@USE_LIBDIR_FALSE@toolexeclibdir = @USE_LIBDIR_FALSE@$(toolexecdir)/lib$(MULTISUBDIR)
-@USE_LIBDIR_FALSE@toolexecdir = @USE_LIBDIR_FALSE@$(exec_prefix)/$(target_alias)
+@USE_LIBDIR_TRUE@toolexeclibdir = $(libdir)$(MULTISUBDIR)
+@USE_LIBDIR_FALSE@toolexeclibdir = $(toolexecdir)/lib$(MULTISUBDIR)
+@USE_LIBDIR_FALSE@toolexecdir = $(exec_prefix)/$(target_alias)
toolexeclib_LTLIBRARIES = $(target_all)
EXTRA_LTLIBRARIES = libgcjgc.la
-libgcjgc_la_SOURCES = allchblk.c alloc.c blacklst.c checksums.c dbg_mlc.c \
-dyn_load.c finalize.c gc_dlopen.c gcj_mlc.c headers.c irix_threads.c \
-linux_threads.c malloc.c mallocx.c mark.c mark_rts.c misc.c new_hblk.c \
-obj_map.c os_dep.c pcr_interface.c ptr_chck.c real_malloc.c reclaim.c \
-solaris_pthreads.c solaris_threads.c specific.c stubborn.c typd_mlc.c`
+libgcjgc_la_SOURCES = allchblk.c alloc.c blacklst.c checksums.c dbg_mlc.c dyn_load.c finalize.c gc_dlopen.c gcj_mlc.c headers.c irix_threads.c linux_threads.c malloc.c mallocx.c mark.c mark_rts.c misc.c new_hblk.c obj_map.c os_dep.c pcr_interface.c ptr_chck.c real_malloc.c reclaim.c solaris_pthreads.c solaris_threads.c specific.c stubborn.c typd_mlc.c
# Include THREADLIBS here to ensure that the correct versions of
libgcjgc_la_DEPENDENCIES = @addobjs@
libgcjgc_la_LDFLAGS = -version-info 1:1:0 -rpath $(toolexeclibdir)
-EXTRA_libgcjgc_la_SOURCES = alpha_mach_dep.s hpux_test_and_clear.s \
-mips_sgi_mach_dep.s mips_ultrix_mach_dep.s powerpc_macosx_mach_dep.s \
-rs6000_mach_dep.s sparc_mach_dep.s sparc_netbsd_mach_dep.s \
-sparc_sunos4_mach_dep.s
+EXTRA_libgcjgc_la_SOURCES = alpha_mach_dep.s mips_sgi_mach_dep.s mips_ultrix_mach_dep.s powerpc_macosx_mach_dep.s rs6000_mach_dep.s sparc_mach_dep.s sparc_netbsd_mach_dep.s sparc_sunos4_mach_dep.s ia64_save_regs_in_stack.s
-AM_CXXFLAGS = @BOEHM_GC_CFLAGS@
+AM_CXXFLAGS = @GC_CFLAGS@
-AM_CFLAGS = @BOEHM_GC_CFLAGS@
+AM_CFLAGS = @GC_CFLAGS@
check_PROGRAMS = gctest
-gctest_SOURCES = test.c
+# Using $< in the above seems to fail with the HP/UX on Itanium make.
+
+gctest_OBJECTS = test.o
gctest_LDADD = ./libgcjgc.la $(THREADLIBS) $(EXTRA_TEST_LIBS)
gctest_LDFLAGS = -shared-libgcc
TESTS_ENVIRONMENT = LD_LIBRARY_PATH=../../$(MULTIBUILDTOP)gcc
all_objs = @addobjs@ $(libgcjgc_la_OBJECTS)
-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) \
- $(AM_CPPFLAGS) $(CPPFLAGS) \
- $(AM_CFLAGS) $(MY_CFLAGS) $(BOEHM_GC_CFLAGS)
+LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(MY_CFLAGS) $(GC_CFLAGS)
LINK = $(LIBTOOL) --mode=link $(CC) $(AM_CFLAGS) $(MY_CFLAGS) $(LDFLAGS) -o $@
# Work around what appears to be a GNU make bug handling MAKEFLAGS
# values defined in terms of make variables, as is the case for CC and
# friends when we are called from the top level Makefile.
-AM_MAKEFLAGS = \
- "AR_FLAGS=$(AR_FLAGS)" \
- "CC_FOR_BUILD=$(CC_FOR_BUILD)" \
- "CFLAGS=$(CFLAGS)" \
- "CXXFLAGS=$(CXXFLAGS)" \
- "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
- "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
- "INSTALL=$(INSTALL)" \
- "INSTALL_DATA=$(INSTALL_DATA)" \
- "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
- "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" \
- "LDFLAGS=$(LDFLAGS)" \
- "LIBCFLAGS=$(LIBCFLAGS)" \
- "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
- "MAKE=$(MAKE)" \
- "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \
- "PICFLAG=$(PICFLAG)" \
- "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \
- "SHELL=$(SHELL)" \
- "EXPECT=$(EXPECT)" \
- "RUNTEST=$(RUNTEST)" \
- "RUNTESTFLAGS=$(RUNTESTFLAGS)" \
- "exec_prefix=$(exec_prefix)" \
- "infodir=$(infodir)" \
- "libdir=$(libdir)" \
- "prefix=$(prefix)" \
- "tooldir=$(tooldir)" \
- "AR=$(AR)" \
- "AS=$(AS)" \
- "CC=$(CC)" \
- "CXX=$(CXX)" \
- "LD=$(LD)" \
- "LIBCFLAGS=$(LIBCFLAGS)" \
- "NM=$(NM)" \
- "PICFLAG=$(PICFLAG)" \
- "RANLIB=$(RANLIB)" \
- "DESTDIR=$(DESTDIR)"
-
-
-CONFIG_STATUS_DEPENDENCIES = $(boehm_gc_basedir)/configure.host
+AM_MAKEFLAGS = "AR_FLAGS=$(AR_FLAGS)" "CC_FOR_BUILD=$(CC_FOR_BUILD)" "CFLAGS=$(CFLAGS)" "CXXFLAGS=$(CXXFLAGS)" "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" "INSTALL=$(INSTALL)" "INSTALL_DATA=$(INSTALL_DATA)" "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" "INSTALL_SCRIPT=$(INSTALL_SCRIPT)" "LDFLAGS=$(LDFLAGS)" "LIBCFLAGS=$(LIBCFLAGS)" "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" "MAKE=$(MAKE)" "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" "PICFLAG=$(PICFLAG)" "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" "SHELL=$(SHELL)" "EXPECT=$(EXPECT)" "RUNTEST=$(RUNTEST)" "RUNTESTFLAGS=$(RUNTESTFLAGS)" "exec_prefix=$(exec_prefix)" "infodir=$(infodir)" "libdir=$(libdir)" "prefix=$(prefix)" "tooldir=$(tooldir)" "AR=$(AR)" "AS=$(AS)" "CC=$(CC)" "CXX=$(CXX)" "LD=$(LD)" "LIBCFLAGS=$(LIBCFLAGS)" "NM=$(NM)" "PICFLAG=$(PICFLAG)" "RANLIB=$(RANLIB)" "DESTDIR=$(DESTDIR)"
+
+
+CONFIG_STATUS_DEPENDENCIES = $(srcdir)/configure.host
MAKEOVERRIDES =
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_CLEAN_FILES =
LTLIBRARIES = $(toolexeclib_LTLIBRARIES)
irix_threads.lo linux_threads.lo malloc.lo mallocx.lo mark.lo \
mark_rts.lo misc.lo new_hblk.lo obj_map.lo os_dep.lo pcr_interface.lo \
ptr_chck.lo real_malloc.lo reclaim.lo solaris_pthreads.lo \
-solaris_threads.lo specific.lo stubborn.lo
+solaris_threads.lo specific.lo stubborn.lo typd_mlc.lo
check_PROGRAMS = gctest$(EXEEXT)
-gctest_OBJECTS = test.$(OBJEXT)
gctest_DEPENDENCIES = ./libgcjgc.la
CFLAGS = @CFLAGS@
COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
-DIST_COMMON = README ChangeLog Makefile.am Makefile.in acinclude.m4 \
-aclocal.m4 configure configure.in
+DIST_COMMON = ChangeLog Makefile.am Makefile.in acinclude.m4 aclocal.m4 \
+config.guess config.sub configure configure.in install-sh ltconfig \
+ltmain.sh mkinstalldirs
DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
TAR = gtar
GZIP_ENV = --best
-SOURCES = $(libgcjgc_la_SOURCES) $(EXTRA_libgcjgc_la_SOURCES) $(gctest_SOURCES)
-OBJECTS = $(libgcjgc_la_OBJECTS) $(gctest_OBJECTS)
+SOURCES = $(libgcjgc_la_SOURCES) $(EXTRA_libgcjgc_la_SOURCES)
+OBJECTS = $(libgcjgc_la_OBJECTS)
all: all-redirect
.SUFFIXES:
@rm -f gctest$(EXEEXT)
$(LINK) $(gctest_LDFLAGS) $(gctest_OBJECTS) $(gctest_LDADD) $(LIBS)
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run `make' without going through this Makefile.
+# To change the values of `make' variables: instead of editing Makefiles,
+# (1) if the variable is set in `config.status', edit `config.status'
+# (which will cause the Makefiles to be regenerated when you run `make');
+# (2) otherwise, pass the desired values on the `make' command line.
+
+@SET_MAKE@
+
+all-recursive install-data-recursive install-exec-recursive \
+installdirs-recursive install-recursive uninstall-recursive install-info-recursive \
+check-recursive installcheck-recursive info-recursive dvi-recursive:
+ @set fnord $(MAKEFLAGS); amf=$$2; \
+ dot_seen=no; \
+ target=`echo $@ | sed s/-recursive//`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ dot_seen=yes; \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done; \
+ if test "$$dot_seen" = "no"; then \
+ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+ fi; test -z "$$fail"
+
+mostlyclean-recursive clean-recursive distclean-recursive \
+maintainer-clean-recursive:
+ @set fnord $(MAKEFLAGS); amf=$$2; \
+ dot_seen=no; \
+ rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \
+ rev="$$subdir $$rev"; \
+ test "$$subdir" = "." && dot_seen=yes; \
+ done; \
+ test "$$dot_seen" = "no" && rev=". $$rev"; \
+ target=`echo $@ | sed s/-recursive//`; \
+ for subdir in $$rev; do \
+ echo "Making $$target in $$subdir"; \
+ if test "$$subdir" = "."; then \
+ local_target="$$target-am"; \
+ else \
+ local_target="$$target"; \
+ fi; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+ || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \
+ done && test -z "$$fail"
+tags-recursive:
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
+ done
+
tags: TAGS
ID: $(HEADERS) $(SOURCES) $(LISP)
here=`pwd` && cd $(srcdir) \
&& mkid -f$$here/ID $$unique $(LISP)
-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
+TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
tags=; \
here=`pwd`; \
+ list='$(SUBDIRS)'; for subdir in $$list; do \
+ if test "$$subdir" = .; then :; else \
+ test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \
+ fi; \
+ done; \
list='$(SOURCES) $(HEADERS)'; \
unique=`for i in $$list; do echo $$i; done | \
awk ' { files[$$0] = 1; } \
|| cp -p $$d/$$file $(distdir)/$$file || :; \
fi; \
done
+ for subdir in $(SUBDIRS); do \
+ if test "$$subdir" = .; then :; else \
+ test -d $(distdir)/$$subdir \
+ || mkdir $(distdir)/$$subdir \
+ || exit 1; \
+ chmod 777 $(distdir)/$$subdir; \
+ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \
+ || exit 1; \
+ fi; \
+ done
check-TESTS: $(TESTS)
@failed=0; all=0; \
srcdir=$(srcdir); export srcdir; \
echo "$$dashes"; \
test "$$failed" -eq 0
info-am:
-info: info-am
+info: info-recursive
dvi-am:
-dvi: dvi-am
+dvi: dvi-recursive
check-am: $(check_PROGRAMS)
$(MAKE) $(AM_MAKEFLAGS) check-TESTS
-check: check-am
+check: check-recursive
installcheck-am:
-installcheck: installcheck-am
+installcheck: installcheck-recursive
install-info-am:
-install-info: install-info-am
+install-info: install-info-recursive
install-exec-am: install-toolexeclibLTLIBRARIES
-install-exec: install-exec-am
+install-exec: install-exec-recursive
install-data-am:
-install-data: install-data-am
+install-data: install-data-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-install: install-am
+install: install-recursive
uninstall-am: uninstall-toolexeclibLTLIBRARIES
-uninstall: uninstall-am
+uninstall: uninstall-recursive
all-am: Makefile $(LTLIBRARIES)
-all-redirect: all-am
+all-redirect: all-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
-installdirs:
+installdirs: installdirs-recursive
+installdirs-am:
$(mkinstalldirs) $(DESTDIR)$(toolexeclibdir)
mostlyclean-libtool mostlyclean-checkPROGRAMS \
mostlyclean-tags mostlyclean-generic
-mostlyclean: mostlyclean-am
+mostlyclean: mostlyclean-recursive
clean-am: clean-toolexeclibLTLIBRARIES clean-compile clean-libtool \
clean-checkPROGRAMS clean-tags clean-generic \
mostlyclean-am
-clean: clean-am
+clean: clean-recursive
distclean-am: distclean-toolexeclibLTLIBRARIES distclean-compile \
distclean-libtool distclean-checkPROGRAMS \
distclean-tags distclean-generic clean-am
-rm -f libtool
-distclean: distclean-am
+distclean: distclean-recursive
-rm -f config.status
maintainer-clean-am: maintainer-clean-toolexeclibLTLIBRARIES \
@echo "This command is intended for maintainers to use;"
@echo "it deletes files that may require special tools to rebuild."
-maintainer-clean: maintainer-clean-am
+maintainer-clean: maintainer-clean-recursive
-rm -f config.status
.PHONY: mostlyclean-toolexeclibLTLIBRARIES \
maintainer-clean-compile mostlyclean-libtool distclean-libtool \
clean-libtool maintainer-clean-libtool mostlyclean-checkPROGRAMS \
distclean-checkPROGRAMS clean-checkPROGRAMS \
-maintainer-clean-checkPROGRAMS tags mostlyclean-tags distclean-tags \
-clean-tags maintainer-clean-tags distdir check-TESTS info-am info \
-dvi-am dvi check check-am installcheck-am installcheck install-info-am \
-install-info install-exec-am install-exec install-data-am install-data \
-install-am install uninstall-am uninstall all-redirect all-am all \
-installdirs mostlyclean-generic distclean-generic clean-generic \
-maintainer-clean-generic clean mostlyclean distclean maintainer-clean
-
+maintainer-clean-checkPROGRAMS install-data-recursive \
+uninstall-data-recursive install-exec-recursive \
+uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \
+all-recursive check-recursive installcheck-recursive info-recursive \
+dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \
+maintainer-clean-recursive tags tags-recursive mostlyclean-tags \
+distclean-tags clean-tags maintainer-clean-tags distdir check-TESTS \
+info-am info dvi-am dvi check check-am installcheck-am installcheck \
+install-info-am install-info install-exec-am install-exec \
+install-data-am install-data install-am install uninstall-am uninstall \
+all-redirect all-am all installdirs-am installdirs mostlyclean-generic \
+distclean-generic clean-generic maintainer-clean-generic clean \
+mostlyclean distclean maintainer-clean
+
+# The following hack produces a warning from automake, but we need it in order
+# to build a file from a subdirectory. FIXME.
+test.o: tests/test.c
+ $(COMPILE) -c $(srcdir)/tests/test.c
$(all_objs) : include/private/gcconfig.h include/private/gc_priv.h \
include/private/gc_hdrs.h include/gc.h include/gc_gcj.h include/gc_mark.h
OSDN Git Service
