-[+ AutoGen5 template
+[+ AutoGen5 template -*- Mode: Makefile -*-
in
+]
NOTPARALLEL = .NOTPARALLEL
$(NOTPARALLEL):
-srcdir = .
-
-prefix = /usr/local
-exec_prefix = $(prefix)
-
-bindir=${exec_prefix}/bin
-sbindir=${exec_prefix}/sbin
-libexecdir=${exec_prefix}/libexec
-datadir=${prefix}/share
-sysconfdir=${prefix}/etc
-sharedstatedir=${prefix}/com
-localstatedir=${prefix}/var
-libdir=${exec_prefix}/lib
-includedir=${prefix}/include
-oldincludedir=/usr/include
-infodir=${prefix}/info
-mandir=${prefix}/man
+srcdir = @srcdir@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+includedir = @includedir@
+oldincludedir = @oldincludedir@
+infodir = @infodir@
+mandir = @mandir@
gxx_include_dir=@gxx_include_dir@
-tooldir = $(exec_prefix)/$(target_alias)
-build_tooldir = $(exec_prefix)/$(target_alias)
+tooldir = @tooldir@
+build_tooldir = @build_tooldir@
-program_transform_name =
+program_transform_name = @program_transform_name@
man1dir = $(mandir)/man1
man2dir = $(mandir)/man2
man7dir = $(mandir)/man7
man8dir = $(mandir)/man8
man9dir = $(mandir)/man9
-infodir = $(prefix)/info
-includedir = $(prefix)/include
# Directory in which the compiler finds executables, libraries, etc.
libsubdir = $(libdir)/gcc-lib/$(target_alias)/$(gcc_version)
GDB_NLM_DEPS =
-SHELL = /bin/sh
+SHELL = @config_shell@
# pwd command to use. Allow user to override default by setting PWDCMD in
# the environment to account for automounters. The make variable must not
LD = ld
-BZIPPROG = bzip2
-MD5PROG = md5sum
-
# These values are substituted by configure.
-DEFAULT_YACC = yacc
-DEFAULT_LEX = lex
-DEFAULT_M4 = m4
+DEFAULT_YACC = @DEFAULT_YACC@
+DEFAULT_LEX = @DEFAULT_LEX@
+DEFAULT_M4 = @DEFAULT_M4@
BISON = `if [ -f $$r/bison/bison ] ; then \
echo $$r/bison/bison -L $$s/bison/ ; \
CC_FOR_BUILD = $(CC)
CXX_FOR_BUILD = $(CXX)
-SUBDIRS = "this is set via configure, don't edit this"
-OTHERS =
+SUBDIRS = @configdirs@
# This is set by the configure script to the list of directories which
# should be built using the target tools.
# This is set by configure to REALLY_SET_LIB_PATH if --enable-shared
# was used.
-SET_LIB_PATH =
+SET_LIB_PATH = @SET_LIB_PATH@
# This is the name of the environment variable used for the path to
# the libraries. This may be changed by configure.in.
-RPATH_ENVVAR = LD_LIBRARY_PATH
+RPATH_ENVVAR = @RPATH_ENVVAR@
# This is the list of directories that may be needed in RPATH_ENVVAR
# so that programs built for the host machine work.
# macro for build!=host builds.
ALL_BUILD_MODULES_LIST = \
all-build-libiberty
-ALL_BUILD_MODULES =
+ALL_BUILD_MODULES = @all_build_modules@
# This is a list of the configure targets for all of the modules which
# are compiled using the native tools.
# This is a list of the targets for all of the modules which are compiled
# using $(FLAGS_TO_PASS).
-ALL_MODULES = [+ FOR host_modules +]\
- all-[+module+] [+ ENDFOR host_modules +]\
+ALL_MODULES =[+
+ FOR host_modules +] \
+ all-[+module+][+
+ ENDFOR host_modules +] \
$(EXTRA_TARGET_HOST_ALL_MODULES)
# This is a list of the check targets for all of the modules which are
check-flex \
check-zip
-CROSS_CHECK_MODULES = [+ FOR host_modules +][+ IF no_check +][+ ELIF no_check_cross +][+ ELSE x +]\
- check-[+module+] [+ ENDIF no_check +][+ ENDFOR host_modules +]\
+CROSS_CHECK_MODULES =[+
+ FOR host_modules +][+
+ IF (not (or (exist? "no_check_cross") (exist? "no_check")))
+ +] \
+ check-[+module+][+
+ ENDIF no_check +][+
+ ENDFOR host_modules +] \
$(EXTRA_TARGET_HOST_CHECK_MODULES)
CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
# This is a list of the install targets for all of the modules which are
# compiled using $(FLAGS_TO_PASS).
-# We put install-opcodes before install-binutils because the installed
-# binutils might be on PATH, and they might need the shared opcodes
-# library.
-# We put install-tcl before install-itcl because itcl wants to run a
-# program on installation which uses the Tcl libraries.
-INSTALL_MODULES = [+ FOR host_modules+][+ IF no_install +][+ ELSE no_install +]\
- install-[+module+] [+ ENDIF no_install +][+ ENDFOR host_modules +]\
+INSTALL_MODULES =[+
+ FOR host_modules+][+
+ IF (not (exist? "no_install")) +] \
+ install-[+module+][+
+ ENDIF no_install +][+
+ ENDFOR host_modules +] \
$(EXTRA_TARGET_HOST_INSTALL_MODULES)
# This is a list of the targets for all of the modules which are compiled
# This is a list of the targets for all of the modules which are compiled
# using $(TARGET_FLAGS_TO_PASS).
-ALL_TARGET_MODULES = [+ FOR target_modules +]\
- all-target-[+module+] [+ ENDFOR target_modules +]
+ALL_TARGET_MODULES =[+
+ FOR target_modules +] \
+ all-target-[+module+][+
+ ENDFOR target_modules +]
# This is a list of the configure targets for all of the modules which
# are compiled using the target tools.
-CONFIGURE_TARGET_MODULES = [+ FOR target_modules +]\
- configure-target-[+module+] [+ ENDFOR target_modules +]
+CONFIGURE_TARGET_MODULES =[+
+ FOR target_modules +] \
+ configure-target-[+module+][+
+ ENDFOR target_modules +]
# This is a list of the check targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
-CHECK_TARGET_MODULES = [+ FOR target_modules +][+ IF no_check +][+ ELSE check +]\
- check-target-[+module+] [+ ENDIF no_check +][+ ENDFOR target_modules +]
+CHECK_TARGET_MODULES =[+
+ FOR target_modules +][+
+ IF (not (exist? "no_check")) +] \
+ check-target-[+module+][+
+ ENDIF no_check +][+
+ ENDFOR target_modules +]
# This is a list of the install targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
-INSTALL_TARGET_MODULES = [+ FOR target_modules +][+ IF no_install +][+ ELSE install +]\
- install-target-[+module+] [+ ENDIF no_install +][+ ENDFOR target_modules +]
+INSTALL_TARGET_MODULES =[+
+ FOR target_modules +][+
+ IF (not (exist? "no_install")) +] \
+ install-target-[+module+][+
+ ENDIF no_install +][+
+ ENDFOR target_modules +]
# This is a list of the targets for which we can do a clean-{target}.
-CLEAN_MODULES = [+ FOR host_modules +][+ IF no_clean +][+ ELSE no_clean +]\
- clean-[+module+] [+ ENDIF no_clean +][+ ENDFOR host_modules +]
+CLEAN_MODULES =[+
+ FOR host_modules +][+
+ IF (not (exist? "no_clean")) +] \
+ clean-[+module+][+
+ ENDIF no_clean +][+
+ ENDFOR host_modules +]
# All of the target modules that can be cleaned
-CLEAN_TARGET_MODULES = [+ FOR target_modules +][+ IF no_clean +][+ ELSE clean +]\
- clean-target-[+module+] [+ ENDIF no_clean +][+ ENDFOR target_modules +]
+CLEAN_TARGET_MODULES =[+
+ FOR target_modules +][+
+ IF (not (exist? "no_clean")) +] \
+ clean-target-[+module+][+
+ ENDIF no_clean +][+
+ ENDFOR target_modules +]
# All of the x11 modules that can be cleaned
CLEAN_X11_MODULES = \
# This rule is used to build the modules which use FLAGS_TO_PASS. To
# build a target all-X means to cd to X and make all.
-#
-# all-gui, and all-libproc are handled specially because
-# they are still experimental, and if they fail to build, that
-# shouldn't stop "make all".
-.PHONY: $(ALL_MODULES) all-gui all-libproc
-$(ALL_MODULES) all-gui all-libproc:
+.PHONY: $(ALL_MODULES)
+$(ALL_MODULES):
@dir=`echo $@ | sed -e 's/all-//'`; \
if [ -f ./$${dir}/Makefile ] ; then \
r=`${PWD}`; export r; \
# In theory, on an SMP all those dependencies can be resolved
# in parallel.
#
-.PHONY: bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean
-bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean: all-bootstrap
+.PHONY: bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap
+bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap: all-bootstrap
@r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
true; \
fi
-.PHONY: check-c++
-check-c++:
+.PHONY: check-gcc-c++
+check-gcc-c++:
@if [ -f ./gcc/Makefile ] ; then \
r=`${PWD}`; export r; \
s=`cd $(srcdir); ${PWD}`; export s; \
$(SET_LIB_PATH) \
(cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check-c++); \
- $(MAKE) check-target-libstdc++-v3; \
else \
true; \
- fi
+ fi
+
+.PHONY: check-c++
+check-c++: check-target-libstdc++-v3 check-gcc-c++
.PHONY: install-gcc
install-gcc:
all-gawk:
all-gcc: all-bison all-byacc all-binutils all-gas all-ld all-zlib
all-bootstrap: all-libiberty all-texinfo all-bison all-byacc all-binutils all-gas all-ld all-zlib
-GDB_TK = all-tk all-tcl all-itcl all-tix all-libgui
+GDB_TK = @GDB_TK@
all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-bison all-byacc all-sim $(gdbnlmrequirements) $(GDB_TK)
all-gettext:
all-gnuserv:
all-target-gperf: all-target-libiberty all-target-libstdc++-v3
all-gprof: all-libiberty all-bfd all-opcodes all-intl
all-grep: all-libiberty
-all-gui: all-gdb all-libproc
all-guile:
all-gzip: all-libiberty
all-hello: all-libiberty
configure-target-fastjar: configure-target-zlib
all-target-fastjar: configure-target-fastjar all-target-zlib all-target-libiberty
configure-target-libiberty: $(ALL_GCC_C)
+configure-target: $(CONFIGURE_TARGET_MODULES)
all-target: $(ALL_TARGET_MODULES)
install-target: $(INSTALL_TARGET_MODULES)
install-gdb: install-tcl install-tk install-itcl install-tix install-libgui
install-sid: install-tcl install-tk
+# We put install-opcodes before install-binutils because the installed
+# binutils might be on PATH, and they might need the shared opcodes
+# library.
+install-binutils: install-opcodes
+
+# We put install-tcl before install-itcl because itcl wants to run a
+# program on installation which uses the Tcl libraries.
+install-itcl: install-tcl
+
+
# Dependencies of all-target-foo on configure-target-foo.
[+ FOR target_modules +]all-target-[+module+]: configure-target-[+module+]
[+ ENDFOR target_modules +]
$(SHELL) ./config.status
#
-# Support for building net releases
-
-# Files in devo used in any net release.
-# ChangeLog omitted because it may refer to files which are not in this
-# distribution (perhaps it would be better to include it anyway).
-DEVO_SUPPORT= README Makefile.in configure configure.in \
- config.guess config.if config.sub config move-if-change \
- mpw-README mpw-build.in mpw-config.in mpw-configure mpw-install \
- COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
- mkinstalldirs ltconfig ltmain.sh missing ylwrap \
- libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh
-
-# Files in devo/etc used in any net release.
-# ChangeLog omitted because it may refer to files which are not in this
-# distribution (perhaps it would be better to include it anyway).
-ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
- make-stds.texi standards.info* configure.texi configure.info* \
- configbuild.* configdev.*
-
-
-# When you use `make setup-dirs' or `make taz' you should always redefine
-# this macro.
-SUPPORT_FILES = list-of-support-files-for-tool-in-question
-
-# NOTE: No double quotes in the below. It is used within shell script
-# as VER="$(VER)"
-VER = ` if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \
- sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
- elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
- sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
- elif test -f $(TOOL)/version.in; then \
- head -1 $(TOOL)/version.in; \
- elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \
- sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \
- else \
- echo VERSION; \
- fi`
-PACKAGE = $(TOOL)
-
-.PHONY: taz
-taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
- $(MAKE) -f Makefile.in do-proto-toplev \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-md5sum \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-tar \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-bz2 \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
-
-.PHONY: gdb-tar
-gdb-tar: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
- $(MAKE) -f Makefile.in do-proto-toplev \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-md5sum \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-djunpack \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-tar \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
-
-.PHONY: gdb-taz
-gdb-taz: gdb-tar $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
- $(MAKE) -f Makefile.in gdb-tar \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-bz2 \
- TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(SUPPORT_FILES)"
-
-.PHONY: do-proto-toplev
-do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
- echo "==> Making $(PACKAGE)-$(VER)/"
- # Take out texinfo from a few places.
- sed -e '/^all\.normal: /s/\all-texinfo //' \
- -e '/^ install-texinfo /d' \
- <Makefile.in >tmp
- mv -f tmp Makefile.in
- #
- ./configure sun4
- [ -z "$(CONFIGURE_TARGET_MODULES)" ] \
- || $(MAKE) $(CONFIGURE_TARGET_MODULES) \
- ALL_GCC="" ALL_GCC_C="" ALL_GCC_CXX="" \
- CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
- # Make links, and run "make diststuff" or "make info" when needed.
- rm -rf proto-toplev ; mkdir proto-toplev
- set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
- for d in $$dirs ; do \
- if [ -d $$d ]; then \
- if [ ! -f $$d/Makefile ] ; then true ; \
- elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \
- (cd $$d ; $(MAKE) diststuff ) || exit 1 ; \
- elif grep '^info:' $$d/Makefile >/dev/null ; then \
- (cd $$d ; $(MAKE) info ) || exit 1 ; \
- fi ; \
- if [ -d $$d/proto-$$d.dir ]; then \
- ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \
- else \
- ln -s ../$$d proto-toplev/$$d ; \
- fi ; \
- else ln -s ../$$d proto-toplev/$$d ; fi ; \
- done
- cd etc && $(MAKE) info
- $(MAKE) distclean
- #
- mkdir proto-toplev/etc
- (cd proto-toplev/etc; \
- for i in $(ETC_SUPPORT); do \
- ln -s ../../etc/$$i . ; \
- done)
- #
- # Take out texinfo from configurable dirs
- rm proto-toplev/configure.in
- sed -e '/^host_tools=/s/texinfo //' \
- <configure.in >proto-toplev/configure.in
- #
- mkdir proto-toplev/texinfo
- ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/
- if test -r texinfo/util/tex3patch ; then \
- mkdir proto-toplev/texinfo/util && \
- ln -s ../../../texinfo/util/tex3patch proto-toplev/texinfo/util ; \
- else true; fi
- chmod -R og=u . || chmod og=u `find . -print`
- #
- # Create .gmo files from .po files.
- for f in `find . -name '*.po' -type f -print`; do \
- msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \
- done
- #
- -rm -f $(PACKAGE)-$(VER)
- ln -s proto-toplev $(PACKAGE)-$(VER)
-
-.PHONY: do-tar
-do-tar:
- echo "==> Making $(PACKAGE)-$(VER).tar"
- -rm -f $(PACKAGE)-$(VER).tar
- find $(PACKAGE)-$(VER) -follow -name CVS -prune -o -type f -print \
- | tar cTfh - $(PACKAGE)-$(VER).tar
-
-.PHONY: do-bz2
-do-bz2:
- echo "==> Bzipping $(PACKAGE)-$(VER).tar.bz2"
- -rm -f $(PACKAGE)-$(VER).tar.bz2
- $(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar
-
-.PHONY: do-md5sum
-do-md5sum:
- echo "==> Adding md5 checksum to top-level directory"
- cd proto-toplev && find * -follow -name CVS -prune -o -type f -print \
- | xargs $(MD5PROG) > ../md5.sum
- mv md5.sum proto-toplev
-
-.PHONY: do-djunpack
-do-djunpack:
- echo "==> Adding updated djunpack.bat to top-level directory"
- echo - 's /gdb-[0-9\.]*/gdb-'"$(VER)"'/'
- sed < djunpack.bat > djunpack.new \
- -e 's/gdb-[0-9][0-9\.]*/gdb-'"$(VER)"'/'
- mv djunpack.new djunpack.bat
- -rm -f proto-toplev/djunpack.bat
- ln -s ../djunpack.bat proto-toplev/djunpack.bat
-
-TEXINFO_SUPPORT= texinfo/texinfo.tex
-DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT)
-
-.PHONY: gas.tar.bz2
-GAS_SUPPORT_DIRS= bfd include libiberty opcodes intl setup.com makefile.vms mkdep
-gas.tar.bz2: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
- $(MAKE) -f Makefile.in taz TOOL=gas \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GAS_SUPPORT_DIRS)"
-
-# The FSF "binutils" release includes gprof and ld.
-.PHONY: binutils.tar.bz2
-BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof intl setup.com makefile.vms mkdep
-binutils.tar.bz2: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
- $(MAKE) -f Makefile.in taz TOOL=binutils \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)"
-
-.PHONY: gas+binutils.tar.bz2
-GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof
-gas+binutils.tar.bz2: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas
- $(MAKE) -f Makefile.in taz TOOL=gas \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"
-
-GNATS_SUPPORT_DIRS=include libiberty send-pr
-gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
- $(MAKE) -f Makefile.in taz TOOL=gnats \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
-
-.PHONY: gdb.tar.bz2
-GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils intl
-gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-taz TOOL=gdb \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
-.PHONY: gdb.tar
-gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-tar TOOL=gdb \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
-
-DEJAGNU_SUPPORT_DIRS= tcl expect libiberty
-.PHONY: dejagnu.tar.bz2
-dejagnu.tar.bz2: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu
- $(MAKE) -f Makefile.in taz TOOL=dejagnu \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(DEJAGNU_SUPPORT_DIRS)"
-
-.PHONY: gdb+dejagnu.tar.bz2
-GDBD_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl expect dejagnu
-gdb+dejagnu.tar.bz2: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=gdb+dejagnu \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
-.PHONY: gdb+dejagnu.tar
-gdb+dejagnu.tar: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=gdb+dejagnu \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
-
-.PHONY: insight.tar.bz2
-INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl tix libgui
-insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=insight \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
-.PHONY: insight.tar
-insight.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=insight \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
-
-.PHONY: insight+dejagnu.tar.bz2
-INSIGHTD_SUPPORT_DIRS= $(INSIGHT_SUPPORT_DIRS) expect dejagnu
-insight+dejagnu.tar.bz2: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE="insight+dejagnu" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
-.PHONY: insight+dejagnu.tar
-insight+dejagnu.tar: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
- $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE="insight+dejagnu" \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
-
-.PHONY: newlib.tar.bz2
-NEWLIB_SUPPORT_DIRS=libgloss
-# taz configures for the sun4 target which won't configure newlib.
-# We need newlib configured so that the .info files are made.
-# Unfortunately, it is not enough to just configure newlib separately:
-# taz will build the .info files but since SUBDIRS won't contain newlib,
-# distclean won't be run (leaving Makefile, config.status, and the tmp files
-# used in building the .info files, eg: *.def, *.ref).
-# The problem isn't solvable however without a lot of extra work because
-# target libraries are built in subdir $(target_alias) which gets nuked during
-# the make distclean. For now punt on the issue of shipping newlib info files
-# with newlib net releases and wait for a day when some native target (sun4?)
-# supports newlib (if only minimally).
-newlib.tar.bz2: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib
- $(MAKE) -f Makefile.in taz TOOL=newlib \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \
- DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib
.NOEXPORT:
MAKEOVERRIDES=
OSDN Git Service
