# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
+# Tell GNU make 3.79 not to run the top level in parallel. This
+# prevents contention for $builddir/$target/config.cache, as well
+# as minimizing scatter in file system caches.
+NOTPARALLEL = .NOTPARALLEL
+$(NOTPARALLEL):
+
srcdir = .
prefix = /usr/local
PICFLAG =
PICFLAG_FOR_TARGET =
-CHILLFLAGS = $(CFLAGS)
-CHILL_LIB = -lchill
CXX = c++
# Use -O2 to stress test the compiler.
# This is set by the configure script to the list of directories which
# should be built using the target tools.
-TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib librx winsup opcodes bsp libstub cygmon libf2c libchill libobjc
+TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib librx winsup opcodes bsp libstub cygmon libf2c libobjc
# Target libraries are put under this directory:
# Changed by configure to $(target_alias) if cross.
# Should be substed by configure.in
FLAGS_FOR_TARGET =
CC_FOR_TARGET =
-CHILL_FOR_TARGET =
CXX_FOR_TARGET =
CXX_FOR_TARGET_FOR_RECURSIVE_MAKE =
GCJ_FOR_TARGET =
"CC_FOR_TARGET=$(CC_FOR_TARGET)" \
"CFLAGS=$(CFLAGS)" \
"CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \
- "CHILLFLAGS=$(CHILLFLAGS)" \
- "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
- "CHILL_LIB=$(CHILL_LIB)" \
"GCJ_FOR_TARGET=$(GCJ_FOR_TARGET)" \
"CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
"CXXFLAGS=$(CXXFLAGS)" \
all-target-librx \
all-target-newlib \
all-target-libf2c \
- all-target-libchill \
all-target-libobjc \
all-target-libtermcap \
all-target-winsup \
configure-target-librx \
configure-target-newlib \
configure-target-libf2c \
- configure-target-libchill \
configure-target-libobjc \
configure-target-libtermcap \
configure-target-winsup \
check-target-libstdc++-v3 \
check-target-newlib \
check-target-libf2c \
- check-target-libchill \
check-target-libobjc \
check-target-winsup \
check-target-libiberty \
install-target-libstdc++-v3 \
install-target-newlib \
install-target-libf2c \
- install-target-libchill \
install-target-libobjc \
install-target-libtermcap \
install-target-winsup \
clean-target-librx \
clean-target-newlib \
clean-target-libf2c \
- clean-target-libchill \
clean-target-libobjc \
clean-target-winsup \
clean-target-libgloss \
# Check target.
-.PHONY: check
-check: $(CHECK_MODULES) \
+.PHONY: check do-check
+check:
+ $(MAKE) do-check NOTPARALLEL=parallel-ok
+
+do-check: $(CHECK_MODULES) \
$(CHECK_TARGET_MODULES) \
$(CHECK_X11_MODULES) \
check-gcc
all-libtool:
configure-target-libf2c: $(ALL_GCC_C)
all-target-libf2c: configure-target-libf2c all-target-libiberty
-configure-target-libchill: $(ALL_GCC_C)
-all-target-libchill: configure-target-libchill all-target-libiberty
configure-target-libobjc: $(ALL_GCC_C)
all-target-libobjc: configure-target-libobjc all-target-libiberty
all-m4: all-libiberty all-texinfo
all-shellutils:
all-sid: all-tcl all-tk
all-sim: all-libiberty all-bfd all-opcodes all-readline all-cgen
-all-snavigator: all-tcl all-tk all-itcl all-db all-grep all-libgui
+all-snavigator: all-tcl all-tk all-itcl all-tix all-db all-grep all-libgui
all-tar: all-libiberty
all-tcl:
all-tcl8.1:
# ChangeLog omitted because it may refer to files which are not in this
# distribution (perhaps it would be better to include it anyway).
ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
- make-stds.texi standards.info*
+ make-stds.texi standards.info* configure.texi configure.info* \
+ configbuild.* configdev.*
+
# When you use `make setup-dirs' or `make taz' you should always redefine
# this macro.
# NOTE: No double quotes in the below. It is used within shell script
# as VER="$(VER)"
-VER = ` if grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
+VER = ` if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \
+ sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
+ elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
- else \
+ elif test -f $(TOOL)/version.in; then \
+ head -1 $(TOOL)/version.in; \
+ elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \
sed < $(TOOL)/Makefile.in -n 's/^VERSION *= *//p'; \
+ else \
+ echo VERSION; \
fi`
PACKAGE = $(TOOL)
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-tar-bz2 \
+ $(MAKE) -f Makefile.in do-tar \
+ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(SUPPORT_FILES)"
+ $(MAKE) -f Makefile.in do-bz2 \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
-.PHONY: gdb-taz
-gdb-taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
+.PHONY: gdb-tar
+gdb-tar: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
$(MAKE) -f Makefile.in do-proto-toplev \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
- $(MAKE) -f Makefile.in do-tar-bz2 \
+ $(MAKE) -f Makefile.in do-tar \
+ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(SUPPORT_FILES)"
+
+.PHONY: gdb-taz
+gdb-taz: gdb-tar $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
+ $(MAKE) -f Makefile.in gdb-tar \
+ TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(SUPPORT_FILES)"
+ $(MAKE) -f Makefile.in do-bz2 \
TOOL=$(TOOL) PACKAGE="$(PACKAGE)" VER="$(VER)" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(SUPPORT_FILES)"
else true; fi
chmod -R og=u . || chmod og=u `find . -print`
#
+ # Create .gmo files from .po files.
+ for f in `find . -name '*.po' -type f -print`; do \
+ msgfmt -o `echo $$f | sed -e 's/\.po$$/.gmo/'` $$f ; \
+ done
+ #
-rm -f $(PACKAGE)-$(VER)
ln -s proto-toplev $(PACKAGE)-$(VER)
-.PHONY: do-tar-bz2
-do-tar-bz2:
- echo "==> Making $(PACKAGE)-$(VER).tar.bz2"
- -rm -f $(PACKAGE)-$(VER).tar.bz2
+.PHONY: do-tar
+do-tar:
+ echo "==> Making $(PACKAGE)-$(VER).tar"
+ -rm -f $(PACKAGE)-$(VER).tar
find $(PACKAGE)-$(VER) -follow -name CVS -prune -o -type f -print \
| tar cTfh - $(PACKAGE)-$(VER).tar
+
+.PHONY: do-bz2
+do-bz2:
+ echo "==> Bzipping $(PACKAGE)-$(VER).tar.bz2"
+ -rm -f $(PACKAGE)-$(VER).tar.bz2
$(BZIPPROG) -v -9 $(PACKAGE)-$(VER).tar
.PHONY: do-md5sum
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
+.PHONY: gdb.tar
+gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in gdb-tar TOOL=gdb \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
-.PHONY: dejagnu.tar.bz2
DEJAGNU_SUPPORT_DIRS= tcl expect libiberty
+.PHONY: dejagnu.tar.bz2
dejagnu.tar.bz2: $(DIST_SUPPORT) $(DEJAGNU_SUPPORT_DIRS) dejagnu
$(MAKE) -f Makefile.in taz TOOL=dejagnu \
MD5PROG="$(MD5PROG)" \
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=gdb+dejagnu \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
+.PHONY: gdb+dejagnu.tar
+gdb+dejagnu.tar: $(DIST_SUPPORT) $(GDBD_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=gdb+dejagnu \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(GDBD_SUPPORT_DIRS)"
.PHONY: insight.tar.bz2
INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl tix libgui
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE=insight \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
+.PHONY: insight.tar
+insight.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE=insight \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(INSIGHT_SUPPORT_DIRS)"
.PHONY: insight+dejagnu.tar.bz2
INSIGHTD_SUPPORT_DIRS= $(INSIGHT_SUPPORT_DIRS) expect dejagnu
$(MAKE) -f Makefile.in gdb-taz TOOL=gdb PACKAGE="insight+dejagnu" \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
+.PHONY: insight+dejagnu.tar
+insight+dejagnu.tar: $(DIST_SUPPORT) $(INSIGHTD_SUPPORT_DIRS) gdb
+ $(MAKE) -f Makefile.in gdb-tar TOOL=gdb PACKAGE="insight+dejagnu" \
+ MD5PROG="$(MD5PROG)" \
+ SUPPORT_FILES="$(INSIGHTD_SUPPORT_DIRS)"
.PHONY: newlib.tar.bz2
NEWLIB_SUPPORT_DIRS=libgloss
OSDN Git Service
