* libtool.m4 (libtool_flags): Add patch from libtool CVS: Support

[pf3gnuchains/gcc-fork.git] / Makefile.in

diff --git a/Makefile.in b/Makefile.in
index 0121ad8..6f76897 100644 (file)
--- a/Makefile.in
+++ b/Makefile.in
@@ -201,11 +201,11 @@ BUILD_CONFIGARGS = @build_configargs@
 
 # This is set by configure to REALLY_SET_LIB_PATH if --enable-shared
 # was used.
-SET_LIB_PATH =
+SET_LIB_PATH = @SET_LIB_PATH@
 
 # This is the name of the environment variable used for the path to
 # the libraries.  This may be changed by configure.in.
-RPATH_ENVVAR = LD_LIBRARY_PATH
+RPATH_ENVVAR = @RPATH_ENVVAR@
 
 # This is the list of directories that may be needed in RPATH_ENVVAR
 # so that programs built for the host machine work.
@@ -653,11 +653,6 @@ CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES)
 
 # This is a list of the install targets for all of the modules which are
 # compiled using $(FLAGS_TO_PASS).
-# We put install-opcodes before install-binutils because the installed
-# binutils might be on PATH, and they might need the shared opcodes
-# library.
-# We put install-tcl before install-itcl because itcl wants to run a
-# program on installation which uses the Tcl libraries.
 INSTALL_MODULES = \
        install-ash \
        install-autoconf \
@@ -765,7 +760,8 @@ ALL_TARGET_MODULES = \
        all-target-libjava \
        all-target-zlib \
        all-target-boehm-gc \
-       all-target-qthreads 
+       all-target-qthreads \
+       all-target-rda 
 
 # This is a list of the configure targets for all of the modules which
 # are compiled using the target tools.
@@ -784,7 +780,8 @@ CONFIGURE_TARGET_MODULES = \
        configure-target-libjava \
        configure-target-zlib \
        configure-target-boehm-gc \
-       configure-target-qthreads 
+       configure-target-qthreads \
+       configure-target-rda 
 
 # This is a list of the check targets for all of the modules which are
 # compiled using $(TARGET_FLAGS_TO_PASS).
@@ -800,7 +797,8 @@ CHECK_TARGET_MODULES = \
        check-target-libjava \
        check-target-zlib \
        check-target-boehm-gc \
-       check-target-qthreads 
+       check-target-qthreads \
+       check-target-rda 
 
 # This is a list of the install targets for all of the modules which are
 # compiled using $(TARGET_FLAGS_TO_PASS).
@@ -817,7 +815,8 @@ INSTALL_TARGET_MODULES = \
        install-target-libjava \
        install-target-zlib \
        install-target-boehm-gc \
-       install-target-qthreads 
+       install-target-qthreads \
+       install-target-rda 
 
 # This is a list of the targets for which we can do a clean-{target}.
 CLEAN_MODULES = \
@@ -897,7 +896,8 @@ CLEAN_TARGET_MODULES = \
        clean-target-libjava \
        clean-target-zlib \
        clean-target-boehm-gc \
-       clean-target-qthreads 
+       clean-target-qthreads \
+       clean-target-rda 
 
 # All of the x11 modules that can be cleaned
 CLEAN_X11_MODULES = \
@@ -1258,12 +1258,8 @@ $(CONFIGURE_BUILD_MODULES):
 
 # This rule is used to build the modules which use FLAGS_TO_PASS.  To
 # build a target all-X means to cd to X and make all.
-#
-# all-gui, and all-libproc are handled specially because
-# they are still experimental, and if they fail to build, that
-# shouldn't stop "make all".
-.PHONY: $(ALL_MODULES) all-gui all-libproc
-$(ALL_MODULES) all-gui all-libproc:
+.PHONY: $(ALL_MODULES)
+$(ALL_MODULES):
        @dir=`echo $@ | sed -e 's/all-//'`; \
        if [ -f ./$${dir}/Makefile ] ; then \
          r=`${PWD}`; export r; \
@@ -1536,8 +1532,8 @@ all-gcc:
 # In theory, on an SMP all those dependencies can be resolved
 # in parallel.
 #
-.PHONY: bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean
-bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean: all-bootstrap
+.PHONY: bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap
+bootstrap bootstrap-lean bootstrap2 bootstrap2-lean bootstrap3 bootstrap3-lean bootstrap4 bootstrap4-lean bubblestrap quickstrap cleanstrap restrap: all-bootstrap
        @r=`${PWD}`; export r; \
        s=`cd $(srcdir); ${PWD}`; export s; \
        $(SET_LIB_PATH) \
@@ -1677,7 +1673,6 @@ configure-target-gperf: $(ALL_GCC_CXX)
 all-target-gperf: all-target-libiberty all-target-libstdc++-v3
 all-gprof: all-libiberty all-bfd all-opcodes all-intl
 all-grep: all-libiberty
-all-gui: all-gdb all-libproc
 all-guile:
 all-gzip: all-libiberty
 all-hello: all-libiberty
@@ -1746,6 +1741,16 @@ install-target: $(INSTALL_TARGET_MODULES)
 install-gdb: install-tcl install-tk install-itcl install-tix install-libgui
 install-sid: install-tcl install-tk
 
+# We put install-opcodes before install-binutils because the installed
+# binutils might be on PATH, and they might need the shared opcodes
+# library.
+install-binutils: install-opcodes
+
+# We put install-tcl before install-itcl because itcl wants to run a
+# program on installation which uses the Tcl libraries.
+install-itcl: install-tcl
+
+
 # Dependencies of all-target-foo on configure-target-foo.
 all-target-libstdc++-v3: configure-target-libstdc++-v3
 all-target-newlib: configure-target-newlib
@@ -1762,6 +1767,7 @@ all-target-libjava: configure-target-libjava
 all-target-zlib: configure-target-zlib
 all-target-boehm-gc: configure-target-boehm-gc
 all-target-qthreads: configure-target-qthreads
+all-target-rda: configure-target-rda
 
 
 ### other supporting targets