# with srcdir=..
HOST_SUBDIR = @host_subdir@
# This is the list of variables to export in the environment when
-# configuring subdirectories for the host system.
+# configuring subdirectories for the host system. We need to pass
+# some to the GCC configure because of its hybrid host/target nature.
HOST_EXPORTS = \
$(BASE_EXPORTS) \
CC="$(CC)"; export CC; \
WINDRES="$(WINDRES)"; export WINDRES; \
OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \
OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \
+ AR_FOR_TARGET="$(AR_FOR_TARGET)"; export AR_FOR_TARGET; \
+ AS_FOR_TARGET="$(AS_FOR_TARGET)"; export AS_FOR_TARGET; \
+ GCC_FOR_TARGET="$(GCC_FOR_TARGET)"; export GCC_FOR_TARGET; \
+ LD_FOR_TARGET="$(LD_FOR_TARGET)"; export LD_FOR_TARGET; \
+ NM_FOR_TARGET="$(NM_FOR_TARGET)"; export NM_FOR_TARGET; \
+ OBJDUMP_FOR_TARGET="$(OBJDUMP_FOR_TARGET)"; export OBJDUMP_FOR_TARGET; \
+ RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)"; export RANLIB_FOR_TARGET; \
TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \
GMPLIBS="$(HOST_GMPLIBS)"; export GMPLIBS; \
GMPINC="$(HOST_GMPINC)"; export GMPINC; \
BASE_TARGET_EXPORTS = \
$(BASE_EXPORTS) \
AR="$(AR_FOR_TARGET)"; export AR; \
- AS="$(AS_FOR_TARGET)"; export AS; \
+ AS="$(COMPILER_AS_FOR_TARGET)"; export AS; \
CC="$(CC_FOR_TARGET)"; export CC; \
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \
GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
GFORTRAN="$(GFORTRAN_FOR_TARGET)"; export GFORTRAN; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
- LD="$(LD_FOR_TARGET)"; export LD; \
+ LD="$(COMPILER_LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
LIPO="$(LIPO_FOR_TARGET)"; export LIPO; \
- NM="$(NM_FOR_TARGET)"; export NM; \
+ NM="$(COMPILER_NM_FOR_TARGET)"; export NM; \
+ OBJDUMP="$(OBJDUMP_FOR_TARGET)"; export OBJDUMP; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
STRIP="$(STRIP_FOR_TARGET)"; export STRIP; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
# here so that they can be overridden by Makefile fragments.
BOOT_CFLAGS= -g -O2
-CONFIGURED_BISON = @CONFIGURED_BISON@
-BISON = `if [ -f $$r/$(BUILD_SUBDIR)/bison/tests/bison ] ; then \
- echo $$r/$(BUILD_SUBDIR)/bison/tests/bison ; \
- else \
- echo ${CONFIGURED_BISON} ; \
- fi`
-
-CONFIGURED_YACC = @CONFIGURED_YACC@
-YACC = `if [ -f $$r/$(BUILD_SUBDIR)/bison/tests/bison ] ; then \
- echo $$r/$(BUILD_SUBDIR)/bison/tests/bison -y ; \
- elif [ -f $$r/$(BUILD_SUBDIR)/byacc/byacc ] ; then \
- echo $$r/$(BUILD_SUBDIR)/byacc/byacc ; \
- else \
- echo ${CONFIGURED_YACC} ; \
- fi`
-
-CONFIGURED_FLEX = @CONFIGURED_FLEX@
-FLEX = `if [ -f $$r/$(BUILD_SUBDIR)/flex/flex ] ; \
- then echo $$r/$(BUILD_SUBDIR)/flex/flex ; \
- else echo ${CONFIGURED_FLEX} ; fi`
-
-CONFIGURED_LEX = @CONFIGURED_LEX@
-LEX = `if [ -f $$r/$(BUILD_SUBDIR)/flex/flex ] ; \
- then echo $$r/$(BUILD_SUBDIR)/flex/flex ; \
- else echo ${CONFIGURED_LEX} ; fi`
-
-CONFIGURED_M4 = @CONFIGURED_M4@
-M4 = `if [ -f $$r/$(BUILD_SUBDIR)/m4/m4 ] ; \
- then echo $$r/$(BUILD_SUBDIR)/m4/m4 ; \
- else echo ${CONFIGURED_M4} ; fi`
-
-# For an installed makeinfo, we require it to be from texinfo 4.2 or
-# higher, else we use the "missing" dummy. We also pass the subdirectory
-# makeinfo even if only the Makefile is there, because Texinfo builds its
-# manual when made, and it requires its own version.
-CONFIGURED_MAKEINFO = @CONFIGURED_MAKEINFO@
-MAKEINFO = `if [ -f $$r/$(BUILD_SUBDIR)/texinfo/makeinfo/Makefile ] ; \
- then echo $$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo ; \
- else if (${CONFIGURED_MAKEINFO} --version \
- | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])') >/dev/null 2>&1; \
- then echo ${CONFIGURED_MAKEINFO}; else echo $$s/missing makeinfo; fi; fi`
+BISON = @BISON@
+YACC = @YACC@
+FLEX = @FLEX@
+LEX = @LEX@
+M4 = @M4@
+MAKEINFO = @MAKEINFO@
+EXPECT = @EXPECT@
+RUNTEST = @RUNTEST@
# This just becomes part of the MAKEINFO definition passed down to
# sub-makes. It lets flags be given on the command line while still
# (Default to avoid splitting info files by setting the threshold high.)
MAKEINFOFLAGS = --split-size=5000000
-# FIXME: expect may become a build tool?
-EXPECT = `if [ -f $$r/$(HOST_SUBDIR)/expect/expect ] ; \
- then echo $$r/$(HOST_SUBDIR)/expect/expect ; \
- else echo expect ; fi`
-
-RUNTEST = `if [ -f $$s/dejagnu/runtest ] ; \
- then echo $$s/dejagnu/runtest ; \
- else echo runtest ; fi`
-
# ---------------------------------------------
# Programs producing files for the HOST machine
# ---------------------------------------------
AS = @AS@
-
AR = @AR@
AR_FLAGS = rc
-
CC = @CC@
-CFLAGS = @CFLAGS@
-LIBCFLAGS = $(CFLAGS)
-
CXX = @CXX@
-CXXFLAGS = @CXXFLAGS@
-LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
-
DLLTOOL = @DLLTOOL@
-
-NM = @NM@
-
LD = @LD@
-LDFLAGS =
-
+LIPO = @LIPO@
+NM = @NM@
RANLIB = @RANLIB@
-
+STRIP = @STRIP@
WINDRES = @WINDRES@
+CFLAGS = @CFLAGS@
+LDFLAGS =
+LIBCFLAGS = $(CFLAGS)
+CXXFLAGS = @CXXFLAGS@
+LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates
PICFLAG =
# -----------------------------------------------
FLAGS_FOR_TARGET = @FLAGS_FOR_TARGET@
AR_FOR_TARGET=@AR_FOR_TARGET@
-CONFIGURED_AR_FOR_TARGET=@CONFIGURED_AR_FOR_TARGET@
-USUAL_AR_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/binutils/ar ] ; then \
- echo $$r/$(HOST_SUBDIR)/binutils/ar ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(AR); \
- else \
- echo $(CONFIGURED_AR_FOR_TARGET) ; \
- fi; \
- fi`
-
AS_FOR_TARGET=@AS_FOR_TARGET@
-CONFIGURED_AS_FOR_TARGET=@CONFIGURED_AS_FOR_TARGET@
-USUAL_AS_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/gas/as-new ] ; then \
- echo $$r/$(HOST_SUBDIR)/gas/as-new ; \
- elif [ -f $$r/$(HOST_SUBDIR)/gcc/as ]; then \
- echo $$r/$(HOST_SUBDIR)/gcc/as ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(AS); \
- else \
- echo $(CONFIGURED_AS_FOR_TARGET) ; \
- fi; \
- fi`
-
CC_FOR_TARGET=$(STAGE_CC_WRAPPER) @CC_FOR_TARGET@ $(FLAGS_FOR_TARGET)
-CONFIGURED_CC_FOR_TARGET=@CONFIGURED_CC_FOR_TARGET@
-USUAL_CC_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/gcc/xgcc ] ; then \
- echo $$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/ ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(CC); \
- else \
- echo $(CONFIGURED_CC_FOR_TARGET) ; \
- fi; \
- fi`
-
-# During gcc bootstrap, if we use some random cc for stage1 then
-# CFLAGS will be just -g. We want to ensure that TARGET libraries
-# (which we know are built with gcc) are built with optimizations so
-# prepend -O2 when setting CFLAGS_FOR_TARGET.
-CFLAGS_FOR_TARGET = -O2 $(CFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET)
-SYSROOT_CFLAGS_FOR_TARGET = @SYSROOT_CFLAGS_FOR_TARGET@
# If GCC_FOR_TARGET is not overriden on the command line, then this
# variable is passed down to the gcc Makefile, where it is used to
# build libgcc2.a. We define it here so that it can itself be
# overridden on the command line.
-GCC_FOR_TARGET=@GCC_FOR_TARGET@
-CONFIGURED_GCC_FOR_TARGET=@CONFIGURED_GCC_FOR_TARGET@
-USUAL_GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) \
- $$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/ $(FLAGS_FOR_TARGET)
-LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
-
+GCC_FOR_TARGET=$(STAGE_CC_WRAPPER) @GCC_FOR_TARGET@ $(FLAGS_FOR_TARGET)
CXX_FOR_TARGET=$(STAGE_CC_WRAPPER) @CXX_FOR_TARGET@ $(FLAGS_FOR_TARGET)
-CONFIGURED_CXX_FOR_TARGET=@CONFIGURED_CXX_FOR_TARGET@
-USUAL_CXX_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/gcc/g++ ] ; then \
- (echo $$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++; \
- test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; \
- echo -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs) | tr '\015\012' ' '; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(CXX); \
- else \
- echo $(CONFIGURED_CXX_FOR_TARGET) ; \
- fi; \
- fi`
-
RAW_CXX_FOR_TARGET=$(STAGE_CC_WRAPPER) @RAW_CXX_FOR_TARGET@ $(FLAGS_FOR_TARGET)
-USUAL_RAW_CXX_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/gcc/xgcc ] ; then \
- echo $$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(CXX); \
- else \
- echo $(CONFIGURED_CXX_FOR_TARGET) ; \
- fi; \
- fi`
-
-CXXFLAGS_FOR_TARGET = $(CXXFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET)
-LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
-
GCJ_FOR_TARGET=$(STAGE_CC_WRAPPER) @GCJ_FOR_TARGET@ $(FLAGS_FOR_TARGET)
-CONFIGURED_GCJ_FOR_TARGET=@CONFIGURED_GCJ_FOR_TARGET@
-USUAL_GCJ_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/gcc/gcj ] ; then \
- echo $$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(GCJ); \
- else \
- echo $(CONFIGURED_GCJ_FOR_TARGET) ; \
- fi; \
- fi`
-
GFORTRAN_FOR_TARGET=$(STAGE_CC_WRAPPER) @GFORTRAN_FOR_TARGET@ $(FLAGS_FOR_TARGET)
-CONFIGURED_GFORTRAN_FOR_TARGET=@CONFIGURED_GFORTRAN_FOR_TARGET@
-USUAL_GFORTRAN_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/gcc/gfortran ] ; then \
- echo $$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(GFORTRAN); \
- else \
- echo $(CONFIGURED_GFORTRAN_FOR_TARGET) ; \
- fi; \
- fi`
-
-
DLLTOOL_FOR_TARGET=@DLLTOOL_FOR_TARGET@
-CONFIGURED_DLLTOOL_FOR_TARGET=@CONFIGURED_DLLTOOL_FOR_TARGET@
-USUAL_DLLTOOL_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/binutils/dlltool ] ; then \
- echo $$r/$(HOST_SUBDIR)/binutils/dlltool ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(DLLTOOL); \
- else \
- echo $(CONFIGURED_DLLTOOL_FOR_TARGET) ; \
- fi; \
- fi`
-
LD_FOR_TARGET=@LD_FOR_TARGET@
-CONFIGURED_LD_FOR_TARGET=@CONFIGURED_LD_FOR_TARGET@
-USUAL_LD_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/ld/ld-new ] ; then \
- echo $$r/$(HOST_SUBDIR)/ld/ld-new ; \
- elif [ -f $$r/$(HOST_SUBDIR)/gcc/collect-ld ]; then \
- echo $$r/$(HOST_SUBDIR)/gcc/collect-ld ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(LD); \
- else \
- echo $(CONFIGURED_LD_FOR_TARGET) ; \
- fi; \
- fi`
-
-LDFLAGS_FOR_TARGET =
LIPO_FOR_TARGET=@LIPO_FOR_TARGET@
-CONFIGURED_LIPO_FOR_TARGET=@CONFIGURED_LIPO_FOR_TARGET@
-USUAL_LIPO_FOR_TARGET = ` \
- if [ '$(host)' = '$(target)' ] ; then \
- if [ x'$(LIPO)' != x ]; then \
- echo $(LIPO); \
- else \
- echo lipo; \
- fi; \
- else \
- echo $(CONFIGURED_LIPO_FOR_TARGET) ; \
- fi`
-
NM_FOR_TARGET=@NM_FOR_TARGET@
-CONFIGURED_NM_FOR_TARGET=@CONFIGURED_NM_FOR_TARGET@
-USUAL_NM_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/binutils/nm-new ] ; then \
- echo $$r/$(HOST_SUBDIR)/binutils/nm-new ; \
- elif [ -f $$r/$(HOST_SUBDIR)/gcc/nm ]; then \
- echo $$r/$(HOST_SUBDIR)/gcc/nm ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(NM); \
- else \
- echo $(CONFIGURED_NM_FOR_TARGET) ; \
- fi; \
- fi`
-
+OBJDUMP_FOR_TARGET=@OBJDUMP_FOR_TARGET@
RANLIB_FOR_TARGET=@RANLIB_FOR_TARGET@
-CONFIGURED_RANLIB_FOR_TARGET=@CONFIGURED_RANLIB_FOR_TARGET@
-USUAL_RANLIB_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/binutils/ranlib ] ; then \
- echo $$r/$(HOST_SUBDIR)/binutils/ranlib ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- if [ x'$(RANLIB)' != x ]; then \
- echo $(RANLIB); \
- else \
- echo ranlib; \
- fi; \
- else \
- echo $(CONFIGURED_RANLIB_FOR_TARGET) ; \
- fi; \
- fi`
-
STRIP_FOR_TARGET=@STRIP_FOR_TARGET@
-CONFIGURED_STRIP_FOR_TARGET=@CONFIGURED_STRIP_FOR_TARGET@
-USUAL_STRIP_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/binutils/strip ] ; then \
- echo $$r/$(HOST_SUBDIR)/binutils/strip ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- if [ x'$(STRIP)' != x ]; then \
- echo $(STRIP); \
- else \
- echo strip; \
- fi; \
- else \
- echo $(CONFIGURED_STRIP_FOR_TARGET) ; \
- fi; \
- fi`
-
WINDRES_FOR_TARGET=@WINDRES_FOR_TARGET@
-CONFIGURED_WINDRES_FOR_TARGET=@CONFIGURED_WINDRES_FOR_TARGET@
-USUAL_WINDRES_FOR_TARGET = ` \
- if [ -f $$r/$(HOST_SUBDIR)/binutils/windres ] ; then \
- echo $$r/$(HOST_SUBDIR)/binutils/windres ; \
- else \
- if [ '$(host)' = '$(target)' ] ; then \
- echo $(WINDRES); \
- else \
- echo $(CONFIGURED_WINDRES_FOR_TARGET) ; \
- fi; \
- fi`
+COMPILER_AS_FOR_TARGET=@COMPILER_AS_FOR_TARGET@
+COMPILER_LD_FOR_TARGET=@COMPILER_LD_FOR_TARGET@
+COMPILER_NM_FOR_TARGET=@COMPILER_NM_FOR_TARGET@
+
+# During gcc bootstrap, if we use some random cc for stage1 then
+# CFLAGS will be just -g. We want to ensure that TARGET libraries
+# (which we know are built with gcc) are built with optimizations so
+# prepend -O2 when setting CFLAGS_FOR_TARGET.
+CFLAGS_FOR_TARGET = -O2 $(CFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET)
+SYSROOT_CFLAGS_FOR_TARGET = @SYSROOT_CFLAGS_FOR_TARGET@
+CXXFLAGS_FOR_TARGET = $(CXXFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET)
+LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
+LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
+LDFLAGS_FOR_TARGET =
PICFLAG_FOR_TARGET =
# ------------------------------------
"LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \
"LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \
"NM_FOR_TARGET=$(NM_FOR_TARGET)" \
+ "OBJDUMP_FOR_TARGET=$(OBJDUMP_FOR_TARGET)" \
"RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
"STRIP_FOR_TARGET=$(STRIP_FOR_TARGET)" \
"WINDRES_FOR_TARGET=$(WINDRES_FOR_TARGET)" \
'CXX=$(CXX)' \
'DLLTOOL=$(DLLTOOL)' \
'LD=$(LD)' \
+ 'LIPO=$(LIPO)' \
'NM=$(NM)' \
'RANLIB=$(RANLIB)' \
+ 'STRIP=$(STRIP)' \
'WINDRES=$(WINDRES)'
FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
# are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them.
EXTRA_TARGET_FLAGS = \
'AR=$$(AR_FOR_TARGET)' \
- 'AS=$$(AS_FOR_TARGET)' \
+ 'AS=$$(COMPILER_AS_FOR_TARGET)' \
'CC=$$(CC_FOR_TARGET)' \
'CFLAGS=$$(CFLAGS_FOR_TARGET)' \
'CXX=$$(CXX_FOR_TARGET)' \
'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \
'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \
- 'LD=$$(LD_FOR_TARGET)' \
+ 'LD=$$(COMPILER_LD_FOR_TARGET)' \
'LDFLAGS=$$(LDFLAGS_FOR_TARGET)' \
'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
- 'NM=$$(NM_FOR_TARGET)' \
+ 'NM=$$(COMPILER_NM_FOR_TARGET)' \
+ 'OBJDUMP=$$(OBJDUMP_FOR_TARGET)' \
'RANLIB=$$(RANLIB_FOR_TARGET)' \
'WINDRES=$$(WINDRES_FOR_TARGET)'
maybe-configure-itcl \
maybe-configure-ld \
maybe-configure-libcpp \
+ maybe-configure-libdecnumber \
maybe-configure-libgui \
maybe-configure-libiberty \
maybe-configure-libtool \
.PHONY: all
all:
@if gcc-bootstrap
+ [ -f stage_final ] || echo stage3 > stage_final
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- if [ ! -f stage_last ]; then \
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) bootstrap; \
- fi
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) `cat stage_final`-bubble; \
@endif gcc-bootstrap
@$(unstage)
@r=`${PWD_COMMAND}`; export r; \
s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
if [ -f stage_last ]; then \
- $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target; \
else \
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-host; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-host all-target; \
fi
- @r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-target
@$(stage)
.PHONY: all-build
maybe-all-itcl \
maybe-all-ld \
maybe-all-libcpp \
+ maybe-all-libdecnumber \
maybe-all-libgui \
maybe-all-libiberty \
maybe-all-libtool \
.PHONY: do-info
do-info:
@$(unstage)
- @$(MAKE) $(RECURSE_FLAGS_TO_PASS) info-host \
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) info-host \
info-target
@$(stage)
maybe-info-itcl \
maybe-info-ld \
maybe-info-libcpp \
+ maybe-info-libdecnumber \
maybe-info-libgui \
maybe-info-libiberty \
maybe-info-libtool \
.PHONY: do-dvi
do-dvi:
@$(unstage)
- @$(MAKE) $(RECURSE_FLAGS_TO_PASS) dvi-host \
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) dvi-host \
dvi-target
@$(stage)
maybe-dvi-itcl \
maybe-dvi-ld \
maybe-dvi-libcpp \
+ maybe-dvi-libdecnumber \
maybe-dvi-libgui \
maybe-dvi-libiberty \
maybe-dvi-libtool \
.PHONY: do-html
do-html:
@$(unstage)
- @$(MAKE) $(RECURSE_FLAGS_TO_PASS) html-host \
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) html-host \
html-target
@$(stage)
maybe-html-itcl \
maybe-html-ld \
maybe-html-libcpp \
+ maybe-html-libdecnumber \
maybe-html-libgui \
maybe-html-libiberty \
maybe-html-libtool \
.PHONY: do-TAGS
do-TAGS:
@$(unstage)
- @$(MAKE) $(RECURSE_FLAGS_TO_PASS) TAGS-host \
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) TAGS-host \
TAGS-target
@$(stage)
maybe-TAGS-itcl \
maybe-TAGS-ld \
maybe-TAGS-libcpp \
+ maybe-TAGS-libdecnumber \
maybe-TAGS-libgui \
maybe-TAGS-libiberty \
maybe-TAGS-libtool \
.PHONY: do-install-info
do-install-info:
@$(unstage)
- @$(MAKE) $(RECURSE_FLAGS_TO_PASS) install-info-host \
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) install-info-host \
install-info-target
@$(stage)
maybe-install-info-itcl \
maybe-install-info-ld \
maybe-install-info-libcpp \
+ maybe-install-info-libdecnumber \
maybe-install-info-libgui \
maybe-install-info-libiberty \
maybe-install-info-libtool \
.PHONY: do-installcheck
do-installcheck:
@$(unstage)
- @$(MAKE) $(RECURSE_FLAGS_TO_PASS) installcheck-host \
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) installcheck-host \
installcheck-target
@$(stage)
maybe-installcheck-itcl \
maybe-installcheck-ld \
maybe-installcheck-libcpp \
+ maybe-installcheck-libdecnumber \
maybe-installcheck-libgui \
maybe-installcheck-libiberty \
maybe-installcheck-libtool \
.PHONY: do-mostlyclean
do-mostlyclean:
@$(unstage)
- @$(MAKE) $(RECURSE_FLAGS_TO_PASS) mostlyclean-host \
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) mostlyclean-host \
mostlyclean-target
@$(stage)
maybe-mostlyclean-itcl \
maybe-mostlyclean-ld \
maybe-mostlyclean-libcpp \
+ maybe-mostlyclean-libdecnumber \
maybe-mostlyclean-libgui \
maybe-mostlyclean-libiberty \
maybe-mostlyclean-libtool \
.PHONY: do-clean
do-clean:
@$(unstage)
- @$(MAKE) $(RECURSE_FLAGS_TO_PASS) clean-host \
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) clean-host \
clean-target
@$(stage)
maybe-clean-itcl \
maybe-clean-ld \
maybe-clean-libcpp \
+ maybe-clean-libdecnumber \
maybe-clean-libgui \
maybe-clean-libiberty \
maybe-clean-libtool \
.PHONY: do-distclean
do-distclean:
@$(unstage)
- @$(MAKE) $(RECURSE_FLAGS_TO_PASS) distclean-host \
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) distclean-host \
distclean-target
@$(stage)
maybe-distclean-itcl \
maybe-distclean-ld \
maybe-distclean-libcpp \
+ maybe-distclean-libdecnumber \
maybe-distclean-libgui \
maybe-distclean-libiberty \
maybe-distclean-libtool \
.PHONY: do-maintainer-clean
do-maintainer-clean:
@$(unstage)
- @$(MAKE) $(RECURSE_FLAGS_TO_PASS) maintainer-clean-host \
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) maintainer-clean-host \
maintainer-clean-target
@$(stage)
maybe-maintainer-clean-itcl \
maybe-maintainer-clean-ld \
maybe-maintainer-clean-libcpp \
+ maybe-maintainer-clean-libdecnumber \
maybe-maintainer-clean-libgui \
maybe-maintainer-clean-libiberty \
maybe-maintainer-clean-libtool \
maintainer-clean: local-distclean
realclean: maintainer-clean
-# Extra dependency for clean-target, owing to the mixed nature of gcc
+# Extra dependency for clean-target, owing to the mixed nature of gcc.
clean-target: clean-target-libgcc
clean-target-libgcc:
- test ! -d gcc/libgcc || \
- (cd gcc/libgcc && find . -type d -print) | \
- while read d; do rm -f gcc/$$d/libgcc.a || : ; done
- -rm -rf gcc/libgcc
- -rm -f gcc/stmp-dirs
+ test ! -d gcc || (cd gcc && $(MAKE) $@)
# Check target.
maybe-check-itcl \
maybe-check-ld \
maybe-check-libcpp \
+ maybe-check-libdecnumber \
maybe-check-libgui \
maybe-check-libiberty \
maybe-check-libtool \
do-check:
@$(unstage)
- @$(MAKE) $(RECURSE_FLAGS_TO_PASS) check-host check-target
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) check-host check-target
@$(stage)
# Automated reporting of test results.
.PHONY: install uninstall
install:
@$(unstage)
- @$(MAKE) $(RECURSE_FLAGS_TO_PASS) installdirs install-host install-target
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) installdirs install-host install-target
@$(stage)
.PHONY: install-host-nogcc
maybe-install-itcl \
maybe-install-ld \
maybe-install-libcpp \
+ maybe-install-libdecnumber \
maybe-install-libgui \
maybe-install-libiberty \
maybe-install-libtool \
maybe-install-itcl \
maybe-install-ld \
maybe-install-libcpp \
+ maybe-install-libdecnumber \
maybe-install-libgui \
maybe-install-libiberty \
maybe-install-libtool \
.PHONY: all-gcc maybe-all-gcc
maybe-all-gcc:
@if gcc
-TARGET-gcc=`if [ -f gcc/stage_last ]; then echo quickstrap ; else echo all; fi`
+TARGET-gcc=`if [ -f stage_last ]; then echo quickstrap ; else echo all; fi`
maybe-all-gcc: all-gcc
all-gcc: configure-gcc
@test -f stage_last && exit 0; \
+.PHONY: configure-libdecnumber maybe-configure-libdecnumber
+maybe-configure-libdecnumber:
+@if libdecnumber
+maybe-configure-libdecnumber: configure-libdecnumber
+configure-libdecnumber:
+ @test -f stage_last && exit 0; \
+ test ! -f $(HOST_SUBDIR)/libdecnumber/Makefile || exit 0; \
+ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libdecnumber ; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ echo Configuring in $(HOST_SUBDIR)/libdecnumber; \
+ cd "$(HOST_SUBDIR)/libdecnumber" || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libdecnumber/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ srcdiroption="--srcdir=$${topdir}/libdecnumber"; \
+ libsrcdir="$$s/libdecnumber"; \
+ $(SHELL) $${libsrcdir}/configure \
+ $(HOST_CONFIGARGS) $${srcdiroption} \
+ || exit 1
+@endif libdecnumber
+
+
+
+.PHONY: configure-stage1-libdecnumber maybe-configure-stage1-libdecnumber
+maybe-configure-stage1-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-configure-stage1-libdecnumber: configure-stage1-libdecnumber
+configure-stage1-libdecnumber:
+ @[ `cat stage_current` = stage1 ] || $(MAKE) stage1-start
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] && exit 0 || : ; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ echo Configuring stage 1 in $(HOST_SUBDIR)/libdecnumber ; \
+ cd $(HOST_SUBDIR)/libdecnumber || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libdecnumber/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ srcdiroption="--srcdir=$${topdir}/libdecnumber"; \
+ libsrcdir="$$s/libdecnumber"; \
+ $(SHELL) $${libsrcdir}/configure \
+ $(HOST_CONFIGARGS) $${srcdiroption} \
+ --disable-intermodule --disable-coverage --enable-languages="$(STAGE1_LANGUAGES)"
+@endif libdecnumber-bootstrap
+
+.PHONY: configure-stage2-libdecnumber maybe-configure-stage2-libdecnumber
+maybe-configure-stage2-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-configure-stage2-libdecnumber: configure-stage2-libdecnumber
+configure-stage2-libdecnumber:
+ @[ `cat stage_current` = stage2 ] || $(MAKE) stage2-start
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] && exit 0 || : ; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ echo Configuring stage 2 in $(HOST_SUBDIR)/libdecnumber ; \
+ cd $(HOST_SUBDIR)/libdecnumber || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libdecnumber/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ srcdiroption="--srcdir=$${topdir}/libdecnumber"; \
+ libsrcdir="$$s/libdecnumber"; \
+ $(SHELL) $${libsrcdir}/configure \
+ $(HOST_CONFIGARGS) $${srcdiroption} \
+ @stage2_werror_flag@
+@endif libdecnumber-bootstrap
+
+.PHONY: configure-stage3-libdecnumber maybe-configure-stage3-libdecnumber
+maybe-configure-stage3-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-configure-stage3-libdecnumber: configure-stage3-libdecnumber
+configure-stage3-libdecnumber:
+ @[ `cat stage_current` = stage3 ] || $(MAKE) stage3-start
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] && exit 0 || : ; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ echo Configuring stage 3 in $(HOST_SUBDIR)/libdecnumber ; \
+ cd $(HOST_SUBDIR)/libdecnumber || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libdecnumber/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ srcdiroption="--srcdir=$${topdir}/libdecnumber"; \
+ libsrcdir="$$s/libdecnumber"; \
+ $(SHELL) $${libsrcdir}/configure \
+ $(HOST_CONFIGARGS) $${srcdiroption} \
+ @stage2_werror_flag@
+@endif libdecnumber-bootstrap
+
+.PHONY: configure-stage4-libdecnumber maybe-configure-stage4-libdecnumber
+maybe-configure-stage4-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-configure-stage4-libdecnumber: configure-stage4-libdecnumber
+configure-stage4-libdecnumber:
+ @[ `cat stage_current` = stage4 ] || $(MAKE) stage4-start
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] && exit 0 || : ; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ echo Configuring stage 4 in $(HOST_SUBDIR)/libdecnumber ; \
+ cd $(HOST_SUBDIR)/libdecnumber || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libdecnumber/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ srcdiroption="--srcdir=$${topdir}/libdecnumber"; \
+ libsrcdir="$$s/libdecnumber"; \
+ $(SHELL) $${libsrcdir}/configure \
+ $(HOST_CONFIGARGS) $${srcdiroption} \
+ @stage2_werror_flag@
+@endif libdecnumber-bootstrap
+
+.PHONY: configure-stageprofile-libdecnumber maybe-configure-stageprofile-libdecnumber
+maybe-configure-stageprofile-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-configure-stageprofile-libdecnumber: configure-stageprofile-libdecnumber
+configure-stageprofile-libdecnumber:
+ @[ `cat stage_current` = stageprofile ] || $(MAKE) stageprofile-start
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] && exit 0 || : ; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ echo Configuring stage profile in $(HOST_SUBDIR)/libdecnumber ; \
+ cd $(HOST_SUBDIR)/libdecnumber || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libdecnumber/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ srcdiroption="--srcdir=$${topdir}/libdecnumber"; \
+ libsrcdir="$$s/libdecnumber"; \
+ $(SHELL) $${libsrcdir}/configure \
+ $(HOST_CONFIGARGS) $${srcdiroption} \
+ @stage2_werror_flag@
+@endif libdecnumber-bootstrap
+
+.PHONY: configure-stagefeedback-libdecnumber maybe-configure-stagefeedback-libdecnumber
+maybe-configure-stagefeedback-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-configure-stagefeedback-libdecnumber: configure-stagefeedback-libdecnumber
+configure-stagefeedback-libdecnumber:
+ @[ `cat stage_current` = stagefeedback ] || $(MAKE) stagefeedback-start
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] && exit 0 || : ; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ echo Configuring stage feedback in $(HOST_SUBDIR)/libdecnumber ; \
+ cd $(HOST_SUBDIR)/libdecnumber || exit 1; \
+ case $(srcdir) in \
+ /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \
+ *) topdir=`echo $(HOST_SUBDIR)/libdecnumber/ | \
+ sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \
+ esac; \
+ srcdiroption="--srcdir=$${topdir}/libdecnumber"; \
+ libsrcdir="$$s/libdecnumber"; \
+ $(SHELL) $${libsrcdir}/configure \
+ $(HOST_CONFIGARGS) $${srcdiroption} \
+ @stage2_werror_flag@
+@endif libdecnumber-bootstrap
+
+
+
+
+
+.PHONY: all-libdecnumber maybe-all-libdecnumber
+maybe-all-libdecnumber:
+@if libdecnumber
+TARGET-libdecnumber=all
+maybe-all-libdecnumber: all-libdecnumber
+all-libdecnumber: configure-libdecnumber
+ @test -f stage_last && exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) $(TARGET-libdecnumber))
+@endif libdecnumber
+
+
+
+.PHONY: all-stage1-libdecnumber maybe-all-stage1-libdecnumber
+.PHONY: clean-stage1-libdecnumber maybe-clean-stage1-libdecnumber
+maybe-all-stage1-libdecnumber:
+maybe-clean-stage1-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-all-stage1-libdecnumber: all-stage1-libdecnumber
+all-stage1: all-stage1-libdecnumber
+TARGET-stage1-libdecnumber = $(TARGET-libdecnumber)
+all-stage1-libdecnumber: configure-stage1-libdecnumber
+ @[ `cat stage_current` = stage1 ] || $(MAKE) stage1-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) CFLAGS="$(STAGE1_CFLAGS)" \
+ $(TARGET-stage1-libdecnumber)
+
+maybe-clean-stage1-libdecnumber: clean-stage1-libdecnumber
+clean-stage1: clean-stage1-libdecnumber
+clean-stage1-libdecnumber:
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] || [ -f $(HOST_SUBDIR)/stage1-libdecnumber/Makefile ] \
+ || exit 0 ; \
+ @[ `cat stage_current` = stage1 ] || $(MAKE) stage1-start
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ CFLAGS="$(STAGE1_CFLAGS)" clean
+@endif libdecnumber-bootstrap
+
+
+.PHONY: all-stage2-libdecnumber maybe-all-stage2-libdecnumber
+.PHONY: clean-stage2-libdecnumber maybe-clean-stage2-libdecnumber
+maybe-all-stage2-libdecnumber:
+maybe-clean-stage2-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-all-stage2-libdecnumber: all-stage2-libdecnumber
+all-stage2: all-stage2-libdecnumber
+TARGET-stage2-libdecnumber = $(TARGET-libdecnumber)
+all-stage2-libdecnumber: configure-stage2-libdecnumber
+ @[ `cat stage_current` = stage2 ] || $(MAKE) stage2-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) $(POSTSTAGE1_FLAGS_TO_PASS) \
+ $(TARGET-stage2-libdecnumber)
+
+maybe-clean-stage2-libdecnumber: clean-stage2-libdecnumber
+clean-stage2: clean-stage2-libdecnumber
+clean-stage2-libdecnumber:
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] || [ -f $(HOST_SUBDIR)/stage2-libdecnumber/Makefile ] \
+ || exit 0 ; \
+ @[ `cat stage_current` = stage2 ] || $(MAKE) stage2-start
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
+@endif libdecnumber-bootstrap
+
+
+.PHONY: all-stage3-libdecnumber maybe-all-stage3-libdecnumber
+.PHONY: clean-stage3-libdecnumber maybe-clean-stage3-libdecnumber
+maybe-all-stage3-libdecnumber:
+maybe-clean-stage3-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-all-stage3-libdecnumber: all-stage3-libdecnumber
+all-stage3: all-stage3-libdecnumber
+TARGET-stage3-libdecnumber = $(TARGET-libdecnumber)
+all-stage3-libdecnumber: configure-stage3-libdecnumber
+ @[ `cat stage_current` = stage3 ] || $(MAKE) stage3-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) $(POSTSTAGE1_FLAGS_TO_PASS) \
+ $(TARGET-stage3-libdecnumber)
+
+maybe-clean-stage3-libdecnumber: clean-stage3-libdecnumber
+clean-stage3: clean-stage3-libdecnumber
+clean-stage3-libdecnumber:
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] || [ -f $(HOST_SUBDIR)/stage3-libdecnumber/Makefile ] \
+ || exit 0 ; \
+ @[ `cat stage_current` = stage3 ] || $(MAKE) stage3-start
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
+@endif libdecnumber-bootstrap
+
+
+.PHONY: all-stage4-libdecnumber maybe-all-stage4-libdecnumber
+.PHONY: clean-stage4-libdecnumber maybe-clean-stage4-libdecnumber
+maybe-all-stage4-libdecnumber:
+maybe-clean-stage4-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-all-stage4-libdecnumber: all-stage4-libdecnumber
+all-stage4: all-stage4-libdecnumber
+TARGET-stage4-libdecnumber = $(TARGET-libdecnumber)
+all-stage4-libdecnumber: configure-stage4-libdecnumber
+ @[ `cat stage_current` = stage4 ] || $(MAKE) stage4-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) $(POSTSTAGE1_FLAGS_TO_PASS) \
+ $(TARGET-stage4-libdecnumber)
+
+maybe-clean-stage4-libdecnumber: clean-stage4-libdecnumber
+clean-stage4: clean-stage4-libdecnumber
+clean-stage4-libdecnumber:
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] || [ -f $(HOST_SUBDIR)/stage4-libdecnumber/Makefile ] \
+ || exit 0 ; \
+ @[ `cat stage_current` = stage4 ] || $(MAKE) stage4-start
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ clean
+@endif libdecnumber-bootstrap
+
+
+.PHONY: all-stageprofile-libdecnumber maybe-all-stageprofile-libdecnumber
+.PHONY: clean-stageprofile-libdecnumber maybe-clean-stageprofile-libdecnumber
+maybe-all-stageprofile-libdecnumber:
+maybe-clean-stageprofile-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-all-stageprofile-libdecnumber: all-stageprofile-libdecnumber
+all-stageprofile: all-stageprofile-libdecnumber
+TARGET-stageprofile-libdecnumber = $(TARGET-libdecnumber)
+all-stageprofile-libdecnumber: configure-stageprofile-libdecnumber
+ @[ `cat stage_current` = stageprofile ] || $(MAKE) stageprofile-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) $(POSTSTAGE1_FLAGS_TO_PASS) CFLAGS="$(BOOT_CFLAGS) -fprofile-generate" \
+ $(TARGET-stageprofile-libdecnumber)
+
+maybe-clean-stageprofile-libdecnumber: clean-stageprofile-libdecnumber
+clean-stageprofile: clean-stageprofile-libdecnumber
+clean-stageprofile-libdecnumber:
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] || [ -f $(HOST_SUBDIR)/stageprofile-libdecnumber/Makefile ] \
+ || exit 0 ; \
+ @[ `cat stage_current` = stageprofile ] || $(MAKE) stageprofile-start
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-generate" clean
+@endif libdecnumber-bootstrap
+
+
+.PHONY: all-stagefeedback-libdecnumber maybe-all-stagefeedback-libdecnumber
+.PHONY: clean-stagefeedback-libdecnumber maybe-clean-stagefeedback-libdecnumber
+maybe-all-stagefeedback-libdecnumber:
+maybe-clean-stagefeedback-libdecnumber:
+@if libdecnumber-bootstrap
+maybe-all-stagefeedback-libdecnumber: all-stagefeedback-libdecnumber
+all-stagefeedback: all-stagefeedback-libdecnumber
+TARGET-stagefeedback-libdecnumber = $(TARGET-libdecnumber)
+all-stagefeedback-libdecnumber: configure-stagefeedback-libdecnumber
+ @[ `cat stage_current` = stagefeedback ] || $(MAKE) stagefeedback-start
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ $(POSTSTAGE1_HOST_EXPORTS) \
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) $(POSTSTAGE1_FLAGS_TO_PASS) CFLAGS="$(BOOT_CFLAGS) -fprofile-use" \
+ $(TARGET-stagefeedback-libdecnumber)
+
+maybe-clean-stagefeedback-libdecnumber: clean-stagefeedback-libdecnumber
+clean-stagefeedback: clean-stagefeedback-libdecnumber
+clean-stagefeedback-libdecnumber:
+ @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] || [ -f $(HOST_SUBDIR)/stagefeedback-libdecnumber/Makefile ] \
+ || exit 0 ; \
+ @[ `cat stage_current` = stagefeedback ] || $(MAKE) stagefeedback-start
+ cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) \
+ $(POSTSTAGE1_FLAGS_TO_PASS) \
+ CFLAGS="$(BOOT_CFLAGS) -fprofile-use" clean
+@endif libdecnumber-bootstrap
+
+
+
+
+
+.PHONY: check-libdecnumber maybe-check-libdecnumber
+maybe-check-libdecnumber:
+@if libdecnumber
+maybe-check-libdecnumber: check-libdecnumber
+
+check-libdecnumber:
+ @$(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) check)
+
+@endif libdecnumber
+
+.PHONY: install-libdecnumber maybe-install-libdecnumber
+maybe-install-libdecnumber:
+@if libdecnumber
+maybe-install-libdecnumber: install-libdecnumber
+
+install-libdecnumber: installdirs
+ @$(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(FLAGS_TO_PASS) install)
+
+@endif libdecnumber
+
+# Other targets (info, dvi, etc.)
+
+.PHONY: maybe-info-libdecnumber info-libdecnumber
+maybe-info-libdecnumber:
+@if libdecnumber
+maybe-info-libdecnumber: info-libdecnumber
+
+info-libdecnumber: \
+ configure-libdecnumber
+ @[ -f ./libdecnumber/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing info in libdecnumber" ; \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ info) \
+ || exit 1
+
+@endif libdecnumber
+
+.PHONY: maybe-dvi-libdecnumber dvi-libdecnumber
+maybe-dvi-libdecnumber:
+@if libdecnumber
+maybe-dvi-libdecnumber: dvi-libdecnumber
+
+dvi-libdecnumber: \
+ configure-libdecnumber
+ @[ -f ./libdecnumber/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing dvi in libdecnumber" ; \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ dvi) \
+ || exit 1
+
+@endif libdecnumber
+
+.PHONY: maybe-html-libdecnumber html-libdecnumber
+maybe-html-libdecnumber:
+@if libdecnumber
+maybe-html-libdecnumber: html-libdecnumber
+
+html-libdecnumber: \
+ configure-libdecnumber
+ @[ -f ./libdecnumber/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing html in libdecnumber" ; \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ html) \
+ || exit 1
+
+@endif libdecnumber
+
+.PHONY: maybe-TAGS-libdecnumber TAGS-libdecnumber
+maybe-TAGS-libdecnumber:
+@if libdecnumber
+maybe-TAGS-libdecnumber: TAGS-libdecnumber
+
+TAGS-libdecnumber: \
+ configure-libdecnumber
+ @[ -f ./libdecnumber/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing TAGS in libdecnumber" ; \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ TAGS) \
+ || exit 1
+
+@endif libdecnumber
+
+.PHONY: maybe-install-info-libdecnumber install-info-libdecnumber
+maybe-install-info-libdecnumber:
+@if libdecnumber
+maybe-install-info-libdecnumber: install-info-libdecnumber
+
+install-info-libdecnumber: \
+ configure-libdecnumber \
+ info-libdecnumber
+ @[ -f ./libdecnumber/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing install-info in libdecnumber" ; \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ install-info) \
+ || exit 1
+
+@endif libdecnumber
+
+.PHONY: maybe-installcheck-libdecnumber installcheck-libdecnumber
+maybe-installcheck-libdecnumber:
+@if libdecnumber
+maybe-installcheck-libdecnumber: installcheck-libdecnumber
+
+installcheck-libdecnumber: \
+ configure-libdecnumber
+ @[ -f ./libdecnumber/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing installcheck in libdecnumber" ; \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ installcheck) \
+ || exit 1
+
+@endif libdecnumber
+
+.PHONY: maybe-mostlyclean-libdecnumber mostlyclean-libdecnumber
+maybe-mostlyclean-libdecnumber:
+@if libdecnumber
+maybe-mostlyclean-libdecnumber: mostlyclean-libdecnumber
+
+mostlyclean-libdecnumber:
+ @[ -f ./libdecnumber/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing mostlyclean in libdecnumber" ; \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ mostlyclean) \
+ || exit 1
+
+@endif libdecnumber
+
+.PHONY: maybe-clean-libdecnumber clean-libdecnumber
+maybe-clean-libdecnumber:
+@if libdecnumber
+maybe-clean-libdecnumber: clean-libdecnumber
+
+clean-libdecnumber:
+ @[ -f ./libdecnumber/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing clean in libdecnumber" ; \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ clean) \
+ || exit 1
+
+@endif libdecnumber
+
+.PHONY: maybe-distclean-libdecnumber distclean-libdecnumber
+maybe-distclean-libdecnumber:
+@if libdecnumber
+maybe-distclean-libdecnumber: distclean-libdecnumber
+
+distclean-libdecnumber:
+ @[ -f ./libdecnumber/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing distclean in libdecnumber" ; \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ distclean) \
+ || exit 1
+
+@endif libdecnumber
+
+.PHONY: maybe-maintainer-clean-libdecnumber maintainer-clean-libdecnumber
+maybe-maintainer-clean-libdecnumber:
+@if libdecnumber
+maybe-maintainer-clean-libdecnumber: maintainer-clean-libdecnumber
+
+maintainer-clean-libdecnumber:
+ @[ -f ./libdecnumber/Makefile ] || exit 0; \
+ r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(HOST_EXPORTS) \
+ for flag in $(EXTRA_HOST_FLAGS) ; do \
+ eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \
+ done; \
+ echo "Doing maintainer-clean in libdecnumber" ; \
+ (cd $(HOST_SUBDIR)/libdecnumber && \
+ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
+ "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
+ "RANLIB=$${RANLIB}" \
+ "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
+ maintainer-clean) \
+ || exit 1
+
+@endif libdecnumber
+
+
+
.PHONY: configure-libgui maybe-configure-libgui
maybe-configure-libgui:
@if libgui
@if gcc-bootstrap
unstage = [ -f stage_current ] || $(MAKE) `cat stage_last`-start
-stage = $(MAKE) `cat stage_current`-end
+stage = [ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
@endif gcc-bootstrap
.PHONY: unstage stage
.PHONY: stage1-start stage1-end
stage1-start::
- @[ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \
+ @$(stage); \
echo stage1 > stage_current ; \
echo stage1 > stage_last; \
$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR) $(TARGET_SUBDIR)
set stage1-libcpp libcpp ; \
@CREATE_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); [ -d stage1-libdecnumber ] || \
+ mkdir stage1-libdecnumber; \
+ set stage1-libdecnumber libdecnumber ; \
+ @CREATE_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); [ -d stage1-libiberty ] || \
mkdir stage1-libiberty; \
@cd $(HOST_SUBDIR); set libcpp stage1-libcpp ; \
@UNDO_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); set libdecnumber stage1-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); set libiberty stage1-libiberty ; \
@UNDO_LINK_TO_DIR@
# be reconfigured as well.
.PHONY: stage1-bubble
stage1-bubble::
- @if test -f stage1-lean ; then \
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ if test -f stage1-lean ; then \
echo Skipping rebuild of stage1 ; \
else \
$(MAKE) stage1-start; \
.PHONY: distclean-stage1
distclean-stage1::
- [ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
+ @$(stage)
rm -rf stage1-*
.PHONY: stage2-start stage2-end
stage2-start::
- @[ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \
+ @$(stage); \
echo stage2 > stage_current ; \
echo stage2 > stage_last; \
$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR) $(TARGET_SUBDIR)
set stage1-libcpp prev-libcpp ; \
@CREATE_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); [ -d stage2-libdecnumber ] || \
+ mkdir stage2-libdecnumber; \
+ set stage2-libdecnumber libdecnumber ; \
+ @CREATE_LINK_TO_DIR@ ; \
+ set stage1-libdecnumber prev-libdecnumber ; \
+ @CREATE_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); [ -d stage2-libiberty ] || \
mkdir stage2-libiberty; \
set prev-libcpp stage1-libcpp ; \
@UNDO_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); set libdecnumber stage2-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@ ; \
+ set prev-libdecnumber stage1-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); set libiberty stage2-libiberty ; \
@UNDO_LINK_TO_DIR@ ; \
# be reconfigured as well.
.PHONY: stage2-bubble
stage2-bubble:: stage1-bubble
- @if test -f stage2-lean || test -f stage1-lean ; then \
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ if test -f stage2-lean || test -f stage1-lean ; then \
echo Skipping rebuild of stage2 ; \
else \
$(MAKE) stage2-start; \
.PHONY: bootstrap2
-bootstrap2: stage2-bubble
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all
+bootstrap2:
+ echo stage2 > stage_final
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) stage2-bubble
+ @$(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
+ @$(stage)
# Rules to wipe a stage and all the following ones, also used for cleanstrap
distclean-stage1:: distclean-stage2
.PHONY: distclean-stage2
distclean-stage2::
- [ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
+ @$(stage)
rm -rf stage2-*
.PHONY: stage3-start stage3-end
stage3-start::
- @[ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \
+ @$(stage); \
echo stage3 > stage_current ; \
echo stage3 > stage_last; \
$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR) $(TARGET_SUBDIR)
set stage2-libcpp prev-libcpp ; \
@CREATE_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); [ -d stage3-libdecnumber ] || \
+ mkdir stage3-libdecnumber; \
+ set stage3-libdecnumber libdecnumber ; \
+ @CREATE_LINK_TO_DIR@ ; \
+ set stage2-libdecnumber prev-libdecnumber ; \
+ @CREATE_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); [ -d stage3-libiberty ] || \
mkdir stage3-libiberty; \
set prev-libcpp stage2-libcpp ; \
@UNDO_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); set libdecnumber stage3-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@ ; \
+ set prev-libdecnumber stage2-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); set libiberty stage3-libiberty ; \
@UNDO_LINK_TO_DIR@ ; \
.PHONY: stage3-bubble
stage3-bubble:: stage2-bubble
@bootstrap_lean@-rm -rf stage1-* ; $(STAMP) stage1-lean
- @if test -f stage3-lean || test -f stage2-lean ; then \
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ if test -f stage3-lean || test -f stage2-lean ; then \
echo Skipping rebuild of stage3 ; \
else \
$(MAKE) stage3-start; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage3; \
fi
+ $(MAKE) compare
.PHONY: all-stage3 clean-stage3
do-clean: clean-stage3
@if gcc-bootstrap
compare:
- @if test -f stage2-lean; then \
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ if test -f stage2-lean; then \
echo Cannot compare object files as stage 2 was deleted. ; \
exit 0 ; \
fi; \
- [ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \
- @r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(stage); \
rm -f .bad_compare ; \
cd stage3-gcc; \
files=`find . -name "*$(objext)" -print` ; \
.PHONY: bootstrap
-bootstrap: stage3-bubble
- $(MAKE) compare
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all
+bootstrap:
+ echo stage3 > stage_final
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) stage3-bubble
+ @$(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
+ @$(stage)
# Rules to wipe a stage and all the following ones, also used for cleanstrap
distclean-stage2:: distclean-stage3
.PHONY: distclean-stage3
distclean-stage3::
- [ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
+ @$(stage)
rm -rf stage3-* compare
.PHONY: stage4-start stage4-end
stage4-start::
- @[ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \
+ @$(stage); \
echo stage4 > stage_current ; \
echo stage4 > stage_last; \
$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR) $(TARGET_SUBDIR)
set stage3-libcpp prev-libcpp ; \
@CREATE_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); [ -d stage4-libdecnumber ] || \
+ mkdir stage4-libdecnumber; \
+ set stage4-libdecnumber libdecnumber ; \
+ @CREATE_LINK_TO_DIR@ ; \
+ set stage3-libdecnumber prev-libdecnumber ; \
+ @CREATE_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); [ -d stage4-libiberty ] || \
mkdir stage4-libiberty; \
set prev-libcpp stage3-libcpp ; \
@UNDO_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); set libdecnumber stage4-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@ ; \
+ set prev-libdecnumber stage3-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); set libiberty stage4-libiberty ; \
@UNDO_LINK_TO_DIR@ ; \
.PHONY: stage4-bubble
stage4-bubble:: stage3-bubble
@bootstrap_lean@-rm -rf stage2-* ; $(STAMP) stage2-lean
- @if test -f stage4-lean || test -f stage3-lean ; then \
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ if test -f stage4-lean || test -f stage3-lean ; then \
echo Skipping rebuild of stage4 ; \
else \
$(MAKE) stage4-start; \
$(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage4; \
fi
+ $(MAKE) compare3
.PHONY: all-stage4 clean-stage4
do-clean: clean-stage4
@if gcc-bootstrap
compare3:
- @if test -f stage3-lean; then \
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ if test -f stage3-lean; then \
echo Cannot compare object files as stage 3 was deleted. ; \
exit 0 ; \
fi; \
- [ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \
- @r=`${PWD_COMMAND}`; export r; \
- s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(stage); \
rm -f .bad_compare ; \
cd stage4-gcc; \
files=`find . -name "*$(objext)" -print` ; \
.PHONY: bootstrap4
-bootstrap4: stage4-bubble
- $(MAKE) compare3
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all
+bootstrap4:
+ echo stage4 > stage_final
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) stage4-bubble
+ @$(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
+ @$(stage)
# Rules to wipe a stage and all the following ones, also used for cleanstrap
distclean-stage3:: distclean-stage4
.PHONY: distclean-stage4
distclean-stage4::
- [ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
+ @$(stage)
rm -rf stage4-* compare3
.PHONY: stageprofile-start stageprofile-end
stageprofile-start::
- @[ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \
+ @$(stage); \
echo stageprofile > stage_current ; \
echo stageprofile > stage_last; \
$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR) $(TARGET_SUBDIR)
set stage1-libcpp prev-libcpp ; \
@CREATE_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); [ -d stageprofile-libdecnumber ] || \
+ mkdir stageprofile-libdecnumber; \
+ set stageprofile-libdecnumber libdecnumber ; \
+ @CREATE_LINK_TO_DIR@ ; \
+ set stage1-libdecnumber prev-libdecnumber ; \
+ @CREATE_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); [ -d stageprofile-libiberty ] || \
mkdir stageprofile-libiberty; \
set prev-libcpp stage1-libcpp ; \
@UNDO_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); set libdecnumber stageprofile-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@ ; \
+ set prev-libdecnumber stage1-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); set libiberty stageprofile-libiberty ; \
@UNDO_LINK_TO_DIR@ ; \
# be reconfigured as well.
.PHONY: stageprofile-bubble
stageprofile-bubble:: stage1-bubble
- @if test -f stageprofile-lean || test -f stage1-lean ; then \
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ if test -f stageprofile-lean || test -f stage1-lean ; then \
echo Skipping rebuild of stageprofile ; \
else \
$(MAKE) stageprofile-start; \
distclean-stage1:: distclean-stageprofile
.PHONY: distclean-stageprofile
distclean-stageprofile::
- [ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
+ @$(stage)
rm -rf stageprofile-*
.PHONY: stagefeedback-start stagefeedback-end
stagefeedback-start::
- @[ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \
+ @$(stage); \
echo stagefeedback > stage_current ; \
echo stagefeedback > stage_last; \
$(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR) $(TARGET_SUBDIR)
set stageprofile-libcpp prev-libcpp ; \
@CREATE_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); [ -d stagefeedback-libdecnumber ] || \
+ mkdir stagefeedback-libdecnumber; \
+ set stagefeedback-libdecnumber libdecnumber ; \
+ @CREATE_LINK_TO_DIR@ ; \
+ set stageprofile-libdecnumber prev-libdecnumber ; \
+ @CREATE_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); [ -d stagefeedback-libiberty ] || \
mkdir stagefeedback-libiberty; \
set prev-libcpp stageprofile-libcpp ; \
@UNDO_LINK_TO_DIR@
@endif libcpp
+@if libdecnumber
+ @cd $(HOST_SUBDIR); set libdecnumber stagefeedback-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@ ; \
+ set prev-libdecnumber stageprofile-libdecnumber ; \
+ @UNDO_LINK_TO_DIR@
+@endif libdecnumber
@if libiberty
@cd $(HOST_SUBDIR); set libiberty stagefeedback-libiberty ; \
@UNDO_LINK_TO_DIR@ ; \
# be reconfigured as well.
.PHONY: stagefeedback-bubble
stagefeedback-bubble:: stageprofile-bubble
- @if test -f stagefeedback-lean || test -f stageprofile-lean ; then \
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ if test -f stagefeedback-lean || test -f stageprofile-lean ; then \
echo Skipping rebuild of stagefeedback ; \
else \
$(MAKE) stagefeedback-start; \
.PHONY: profiledbootstrap
-profiledbootstrap: stagefeedback-bubble
- $(MAKE) $(RECURSE_FLAGS_TO_PASS) all
+profiledbootstrap:
+ echo stagefeedback > stage_final
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(RECURSE_FLAGS_TO_PASS) stagefeedback-bubble
+ @$(unstage)
+ @r=`${PWD_COMMAND}`; export r; \
+ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target
+ @$(stage)
# Rules to wipe a stage and all the following ones, also used for cleanstrap
distclean-stageprofile:: distclean-stagefeedback
.PHONY: distclean-stagefeedback
distclean-stagefeedback::
- [ -f stage_current ] && $(MAKE) `cat stage_current`-end || :
+ @$(stage)
rm -rf stagefeedback-*
all-stage4-gcc: all-stage4-libcpp
all-stageprofile-gcc: all-stageprofile-libcpp
all-stagefeedback-gcc: all-stagefeedback-libcpp
+all-gcc: all-libdecnumber
+
+all-stage1-gcc: all-stage1-libdecnumber
+all-stage2-gcc: all-stage2-libdecnumber
+all-stage3-gcc: all-stage3-libdecnumber
+all-stage4-gcc: all-stage4-libdecnumber
+all-stageprofile-gcc: all-stageprofile-libdecnumber
+all-stagefeedback-gcc: all-stagefeedback-libdecnumber
all-gcc: maybe-all-libiberty
all-stage1-gcc: maybe-all-stage1-libiberty
all-stagefeedback-libcpp: maybe-all-stagefeedback-intl
all-fixincludes: maybe-all-libiberty
all-gnattools: maybe-all-target-libada
-configure-gdb: maybe-configure-itcl
-configure-gdb: maybe-configure-tcl
-configure-gdb: maybe-configure-tk
configure-gdb: maybe-configure-sim
all-gdb: maybe-all-libiberty
all-gdb: maybe-all-opcodes
all-gdb: maybe-all-build-bison
all-gdb: maybe-all-build-byacc
all-gdb: maybe-all-sim
-install-gdb: maybe-install-tcl
-install-gdb: maybe-install-tk
-install-gdb: maybe-install-itcl
-install-gdb: maybe-install-libgui
configure-libgui: maybe-configure-tcl
configure-libgui: maybe-configure-tk
all-libgui: maybe-all-tcl
all-prebootstrap: maybe-all-intl
all-prebootstrap: maybe-all-ld
all-prebootstrap: maybe-all-libcpp
+all-prebootstrap: maybe-all-libdecnumber
all-prebootstrap: maybe-all-libiberty
all-prebootstrap: maybe-all-zlib
@endif gcc-no-bootstrap
+CONFIGURE_GDB_TK = @CONFIGURE_GDB_TK@
GDB_TK = @GDB_TK@
+INSTALL_GDB_TK = @INSTALL_GDB_TK@
+configure-gdb: $(CONFIGURE_GDB_TK)
all-gdb: $(gdbnlmrequirements) $(GDB_TK)
+install-gdb: $(INSTALL_GDB_TK)
# Serialization dependencies. Host configures don't work well in parallel to
# each other, due to contention over config.cache. Target configures and
OSDN Git Service
