#
# Makefile for directory with subdirs to build.
# Copyright (C) 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
-# 1999, 2000 Free Software Foundation
+# 1999, 2000, 2001 Free Software Foundation
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
LDFLAGS =
LIBCFLAGS = $(CFLAGS)
+CFLAGS_FOR_BUILD = $(CFLAGS)
CFLAGS_FOR_TARGET = $(CFLAGS)
LDFLAGS_FOR_TARGET =
LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET)
CXXFLAGS_FOR_TARGET = $(CXXFLAGS)
LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates
-RANLIB = ranlib
-
DLLTOOL = dlltool
WINDRES = windres
# This is set by the configure script to the list of directories which
# should be built using the target tools.
-TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib libio librx libstdc++ libg++ winsup opcodes bsp libstub cygmon libf2c libchill libobjc
+TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib librx winsup opcodes bsp libstub cygmon libf2c libchill libobjc
# Target libraries are put under this directory:
# Changed by configure to $(target_alias) if cross.
# This is the list of directories that may be needed in RPATH_ENVVAR
# so that prorgams built for the target machine work.
-TARGET_LIB_PATH = $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs:$$r/$(TARGET_SUBDIR)/libstdc++
+TARGET_LIB_PATH = $$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs:
# configure.in sets SET_LIB_PATH to this if --enable-shared was used.
# Some platforms don't like blank entries, so we remove duplicate,
CC_FOR_TARGET =
CHILL_FOR_TARGET =
CXX_FOR_TARGET =
+CXX_FOR_TARGET_FOR_RECURSIVE_MAKE =
+GCJ_FOR_TARGET =
# If GCC_FOR_TARGET is not overriden on the command line, then this
# variable is passed down to the gcc Makefile, where it is used to
AS_FOR_TARGET = ` \
if [ -f $$r/gas/as-new ] ; then \
echo $$r/gas/as-new ; \
+ elif [ -f $$r/gcc/xgcc ]; then \
+ $(CC_FOR_TARGET) -print-prog-name=as ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(AS); \
LD_FOR_TARGET = ` \
if [ -f $$r/ld/ld-new ] ; then \
echo $$r/ld/ld-new ; \
+ elif [ -f $$r/gcc/xgcc ]; then \
+ $(CC_FOR_TARGET) -print-prog-name=ld ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(LD); \
echo $$r/binutils/ranlib ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
- echo $(RANLIB); \
+ if [ x"$(RANLIB)" != x ]; then \
+ echo $(RANLIB); \
+ else \
+ echo ranlib; \
+ fi; \
else \
t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \
fi; \
NM_FOR_TARGET = ` \
if [ -f $$r/binutils/nm-new ] ; then \
echo $$r/binutils/nm-new ; \
+ elif [ -f $$r/gcc/xgcc ]; then \
+ $(CC_FOR_TARGET) -print-prog-name=nm ; \
else \
if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \
echo $(NM); \
"CHILLFLAGS=$(CHILLFLAGS)" \
"CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \
"CHILL_LIB=$(CHILL_LIB)" \
+ "GCJ_FOR_TARGET=$(GCJ_FOR_TARGET)" \
"CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \
"CXXFLAGS=$(CXXFLAGS)" \
"CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \
"libdir=$(libdir)" \
"libexecdir=$(libexecdir)" \
"lispdir=$(lispdir)" \
+ "libstdcxx_incdir=$(libstdcxx_incdir)" \
+ "libsubdir=$(libsubdir)" \
"localstatedir=$(localstatedir)" \
"mandir=$(mandir)" \
"oldincludedir=$(oldincludedir)" \
"gxx_include_dir=$(gxx_include_dir)" \
"gcc_version=$(gcc_version)" \
"gcc_version_trigger=$(gcc_version_trigger)" \
- "target_alias=$(target_alias)" \
- "libsubdir=$(libsubdir)"
+ "target_alias=$(target_alias)"
+
+# For any flags above that may contain shell code that varies from one
+# target library to another. When doing recursive invocations of the
+# top-level Makefile, we don't want the outer make to evaluate them,
+# so we pass these variables down unchanged. They must not contain
+# single nor double quotes.
+RECURSE_FLAGS = \
+ CXX_FOR_TARGET='$(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)'
# Flags to pass down to most sub-makes, in which we're building with
# the host environment.
'DLLTOOL=$(DLLTOOL)' \
'LD=$(LD)' \
'NM=$(NM)' \
- 'RANLIB=$(RANLIB)' \
+ "`echo 'RANLIB=$(RANLIB)' | sed -e s/.*=$$/XFOO=/`" \
'WINDRES=$(WINDRES)'
FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS)
'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \
'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \
'NM=$$(NM_FOR_TARGET)' \
- 'RANLIB=$$(RANLIB_FOR_TARGET)' \
+ "`echo 'RANLIB=$(RANLIB)' | sed -e s/.*=$$/XFOO=/`" \
'WINDRES=$$(WINDRES_FOR_TARGET)'
TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS)
'HOST_PREFIX=$(HOST_PREFIX)' \
'HOST_PREFIX_1=$(HOST_PREFIX_1)' \
'NM=$(NM)' \
- 'RANLIB=$(RANLIB)' \
+ "`echo 'RANLIB=$(RANLIB)' | sed -e s/.*=$$/XFOO=/`" \
'WINDRES=$$(WINDRES_FOR_TARGET)' \
"GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
+ "CFLAGS_FOR_BUILD=$(CFLAGS_FOR_BUILD)" \
"`echo 'LANGUAGES=$(LANGUAGES)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'STMP_FIXPROTO=$(STMP_FIXPROTO)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'LIMITS_H_TEST=$(LIMITS_H_TEST)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'LIBGCC2_DEBUG_CFLAGS=$(LIBGCC2_DEBUG_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'LIBGCC2_INCLUDES=$(LIBGCC2_INCLUDES)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'ENQUIRE=$(ENQUIRE)' | sed -e s/.*=$$/XFOO=/`" \
+ "`echo 'STAGE1_CFLAGS=$(STAGE1_CFLAGS)' | sed -e s/.*=$$/XFOO=/`" \
"`echo 'BOOT_CFLAGS=$(BOOT_CFLAGS)' | sed -e s/.*=$$/XFOO=/`"
GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS)
all-sed \
all-send-pr \
all-shellutils \
+ all-sid \
all-sim \
all-snavigator \
all-tar \
check-send-pr \
check-shellutils \
check-snavigator \
+ check-sid \
check-sim \
check-tar \
check-tcl \
install-sed \
install-send-pr \
install-shellutils \
+ install-sid \
install-sim \
install-snavigator \
install-tar \
# This is a list of the targets for all of the modules which are compiled
# using $(TARGET_FLAGS_TO_PASS).
ALL_TARGET_MODULES = \
- all-target-libio \
- all-target-libstdc++ \
all-target-libstdc++-v3 \
all-target-librx \
- all-target-libg++ \
all-target-newlib \
all-target-libf2c \
all-target-libchill \
# This is a list of the configure targets for all of the modules which
# are compiled using the target tools.
CONFIGURE_TARGET_MODULES = \
- configure-target-libio \
- configure-target-libstdc++ \
configure-target-libstdc++-v3 \
configure-target-librx \
- configure-target-libg++ \
configure-target-newlib \
configure-target-libf2c \
configure-target-libchill \
# This is a list of the check targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
CHECK_TARGET_MODULES = \
- check-target-libio \
- check-target-libstdc++ \
check-target-libstdc++-v3 \
- check-target-libg++ \
check-target-newlib \
check-target-libf2c \
check-target-libchill \
# This is a list of the install targets for all of the modules which are
# compiled using $(TARGET_FLAGS_TO_PASS).
INSTALL_TARGET_MODULES = \
- install-target-libio \
- install-target-libstdc++ \
install-target-libstdc++-v3 \
- install-target-libg++ \
install-target-newlib \
install-target-libf2c \
install-target-libchill \
clean-sed \
clean-send-pr \
clean-shellutils \
+ clean-sid \
clean-sim \
clean-snavigator \
clean-tar \
# All of the target modules that can be cleaned
CLEAN_TARGET_MODULES = \
- clean-target-libio \
- clean-target-libstdc++ \
clean-target-libstdc++-v3 \
clean-target-librx \
- clean-target-libg++ \
clean-target-newlib \
clean-target-libf2c \
clean-target-libchill \
if (cd ./$$i; \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
- "RANLIB=$${RANLIB}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
$${target}); \
then true; else exit 1; fi; \
if (cd $(TARGET_SUBDIR)/$$i; \
$(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \
"CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \
- "RANLIB=$${RANLIB}" \
+ "`echo \"RANLIB=$${RANLIB}\" | sed -e 's/.*=$$/XFOO=/'`" \
"DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \
$${target}); \
then true; else exit 1; fi; \
-rm -f texinfo/doc/Makefile texinfo/po/POTFILES
-rmdir texinfo/doc texinfo/info texinfo/intl texinfo/lib 2>/dev/null
-rmdir texinfo/makeinfo texinfo/po texinfo/util 2>/dev/null
- -rmdir gcc libiberty texinfo zlib 2>/dev/null
+ -rmdir fastjar gcc libiberty texinfo zlib 2>/dev/null
local-maintainer-clean:
@echo "This command is intended for maintainers to use;"
CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \
CXX="$(CXX_FOR_TARGET)"; export CXX; \
CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \
+ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \
DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \
LD="$(LD_FOR_TARGET)"; export LD; \
LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \
RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \
WINDRES="$(WINDRES_FOR_TARGET)"; export WINDRES; \
echo Configuring in $(TARGET_SUBDIR)/$${dir}; \
- cd $(TARGET_SUBDIR)/$${dir}; \
+ cd "$(TARGET_SUBDIR)/$${dir}" || exit 1; \
case $(srcdir) in \
/* | [A-Za-z]:[\\/]*) \
topdir=$(srcdir) ;; \
CONFIG_SITE=no-such-file $(SHELL) $$s/configure \
$(CONFIG_ARGUMENTS) $${srcdiroption} \
--with-target-subdir="$(TARGET_SUBDIR)"; \
- fi; \
+ fi || exit 1; \
if [ -f skip-this-dir ] ; then \
sh skip-this-dir; \
rm -f skip-this-dir; \
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
+ (cd $(TARGET_SUBDIR)/$${dir}; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \
else \
true; \
fi
r=`pwd`; export r; \
s=`cd $(srcdir); pwd`; export s; \
$(SET_LIB_PATH) \
- (cd $(TARGET_SUBDIR)/$${dir};$(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
+ (cd $(TARGET_SUBDIR)/$${dir}; \
+ $(MAKE) $(TARGET_FLAGS_TO_PASS) check);\
else \
true; \
fi
s=`cd $(srcdir); pwd` ; export s; \
$(SET_LIB_PATH) \
echo "Building runtime libraries"; \
- $(MAKE) $(BASE_FLAGS_TO_PASS) all
+ $(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) all
.PHONY: cross
cross: all-texinfo all-bison all-byacc all-binutils all-gas all-ld
s=`cd $(srcdir); pwd` ; export s; \
$(SET_LIB_PATH) \
echo "Building runtime libraries"; \
- $(MAKE) $(BASE_FLAGS_TO_PASS) all LANGUAGES="c c++"
+ $(MAKE) $(BASE_FLAGS_TO_PASS) $(RECURSE_FLAGS) \
+ LANGUAGES="c c++" all
.PHONY: check-gcc
check-gcc:
true; \
fi
+.PHONY: check-c++
+check-c++:
+ @if [ -f ./gcc/Makefile ] ; then \
+ r=`pwd`; export r; \
+ s=`cd $(srcdir); pwd`; export s; \
+ $(SET_LIB_PATH) \
+ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check-c++); \
+ $(MAKE) check-target-libstdc++-v3 \
+ else \
+ true; \
+ fi
+
.PHONY: install-gcc
install-gcc:
@if [ -f ./gcc/Makefile ] ; then \
install-dosrel-fake:
+ALL_GCC = all-gcc
+ALL_GCC_C = $(ALL_GCC) all-target-newlib all-target-libgloss
+ALL_GCC_CXX = $(ALL_GCC_C) all-target-libstdc++-v3
# This is a list of inter-dependencies among modules.
all-apache:
all-cgen: all-libiberty
all-cvssrc:
configure-target-cygmon: $(ALL_GCC_C)
-all-target-cygmon: configure-target-cygmon all-target-libiberty all-target-libio all-target-libstub all-target-bsp
+all-target-cygmon: configure-target-cygmon all-target-libiberty all-target-libstub all-target-bsp
all-db:
all-dejagnu: all-tcl all-expect all-tk
all-diff: all-libiberty
all-gas: all-libiberty all-opcodes all-bfd all-intl
all-gash: all-tcl
all-gawk:
-ALL_GCC = all-gcc
-ALL_GCC_C = $(ALL_GCC) all-target-newlib all-target-libgloss
-ALL_GCC_CXX = $(ALL_GCC_C) all-target-libstdc++ all-target-libstdc++-v3
all-gcc: all-bison all-byacc all-binutils all-gas all-ld all-zlib
all-bootstrap: all-libiberty all-texinfo all-bison all-byacc all-binutils all-gas all-ld all-zlib
GDB_TK = all-tk all-tcl all-itcl all-tix all-libgui
all-gettext:
all-gnuserv:
configure-target-gperf: $(ALL_GCC_C)
-all-target-gperf: configure-target-gperf all-target-libiberty all-target-libstdc++
+all-target-gperf: configure-target-gperf all-target-libiberty all-target-libstdc++-v3
all-gprof: all-libiberty all-bfd all-opcodes all-intl
all-grep: all-libiberty
all-grez: all-libiberty all-bfd all-opcodes
all-ispell: all-emacs19
all-itcl: all-tcl all-tk all-tcl8.1 all-tk8.1
all-ld: all-libiberty all-bfd all-opcodes all-bison all-byacc all-flex all-intl
-configure-target-libg++: $(ALL_GCC_CXX) configure-target-librx
-all-target-libg++: configure-target-libg++ all-target-libiberty all-target-librx
configure-target-libgloss: $(ALL_GCC)
all-target-libgloss: configure-target-libgloss configure-target-newlib
-configure-target-libio: $(ALL_GCC_C)
-all-target-libio: configure-target-libio all-gas all-ld all-gcc all-target-libiberty all-target-newlib
-check-target-libio: all-target-libstdc++
all-libgui: all-tcl all-tk all-tcl8.1 all-tk8.1 all-itcl
all-libiberty:
configure-target-libffi: $(ALL_GCC_C)
all-target-libjava: configure-target-libjava all-fastjar all-target-zlib all-target-boehm-gc all-target-qthreads all-target-libffi
configure-target-librx: $(ALL_GCC_C)
all-target-librx: configure-target-librx
-configure-target-libstdc++: $(ALL_GCC_C)
-all-target-libstdc++: configure-target-libstdc++ all-target-libiberty all-target-libio
configure-target-libstdc++-v3: $(ALL_GCC_C)
all-target-libstdc++-v3: configure-target-libstdc++-v3 all-target-libiberty
configure-target-libstub: $(ALL_GCC_C)
all-target-libchill: configure-target-libchill all-target-libiberty
configure-target-libobjc: $(ALL_GCC_C)
all-target-libobjc: configure-target-libobjc all-target-libiberty
-all-m4: all-libiberty
+all-m4: all-libiberty all-texinfo
all-make: all-libiberty
all-mmalloc:
configure-target-newlib: $(ALL_GCC)
all-sed: all-libiberty
all-send-pr: all-prms
all-shellutils:
+all-sid: all-tcl all-tk
all-sim: all-libiberty all-bfd all-opcodes all-readline all-cgen
all-snavigator: all-tcl all-tk all-itcl all-db all-grep all-libgui
all-tar: all-libiberty
all-target: $(ALL_TARGET_MODULES)
install-target: $(INSTALL_TARGET_MODULES)
install-gdb: install-tcl install-tk install-itcl install-tix install-libgui
+install-sid: install-tcl install-tk
### other supporting targets
MAKEDIRS= \
MD5PROG="$(MD5PROG)" \
SUPPORT_FILES="$(GASB_SUPPORT_DIRS)"
-.PHONY: libg++.tar.bz2
-LIBGXX_SUPPORT_DIRS=include libstdc++ libio librx libiberty
-libg++.tar.bz2: $(DIST_SUPPORT) libg++
- $(MAKE) -f Makefile.in taz TOOL=libg++ \
- MD5PROG="$(MD5PROG)" \
- SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)"
-
GNATS_SUPPORT_DIRS=include libiberty send-pr
gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
$(MAKE) -f Makefile.in taz TOOL=gnats \
OSDN Git Service
