+2004-06-08 Canqun Yang <canqun@nudt.edu.cn>
+
+ * MAINTAINERS (Write After Approval): Add myself.
+
+2004-06-03 Mark G. Adams <mark.g.adams@sympatico.ca>
+
+ * MAINTAINERS (Write After Approval): Add myself.
+
+2004-06-03 Paolo Bonzini <bonzini@gnu.org>
+
+ * configure.in: Fix --enable-bootstrap breakage introduced in trees
+ without gcc.
+ * configure: Regenerate.
+
+2004-06-01 Paolo Bonzini <bonzini@gnu.org>
+
+ * Makefile.tpl: Fix typo.
+ * Makefile.in: Regenerate.
+
+2004-06-01 Paolo Bonzini <bonzini@gnu.org>
+
+ * configure.in: Remove new- prefix from toplevel
+ bootstrap targets.
+ * configure: Regenerate.
+
+2004-06-01 Paolo Bonzini <bonzini@gnu.org>
+
+ * Makefile.tpl (all.normal): Rename to all.
+ (all): Replace with a rule to pick the default
+ target from configure.
+ (all-gcc, configure-gcc): Use conditionals to
+ do nothing when toplevel bootstrap is going on.
+ (GCC directory bootstrap) [gcc-bootstrap]: Disable.
+ (Toplevel bootstrap) [gcc-no-bootstrap]: Disable.
+ * configure.in: Support --enable-bootstrap.
+
+ * Makefile.def: Remove new- prefix from toplevel
+ bootstrap targets.
+ * Makefile.tpl: Likewise.
+
+ * Makefile.def: Add bootstrap_stage 4. Add bootstrap2
+ target.
+
+ * Makefile.tpl (Toplevel bootstrap): Pass $(BASE_FLAGS_TO_PASS)
+ $(RECURSE_FLAGS) to recursive invocation of make.
+
+ * Makefile.in: Regenerate.
+ * configure: Regenerate.
+
+2004-05-30 Andreas Jaeger <aj@suse.de>
+ Jim Wilson <wilson@specifixinc.com>
+
+ * config-ml.in: Pass FFLAGS and ADAFLAGS for multilibs, handle F77
+ like CC.
+
+2004-05-27 Daniel Jacobowitz <dan@debian.org>
+
+ * configure.in: Fix sed invocation for GFORTRAN_FOR_TARGET.
+ * configure: Regenerate.
+
+2004-05-25 Daniel Jacobowitz <drow@false.org>
+
+ * Makefile.tpl (BUILD_EXPORTS, HOST_EXPORTS, GCC_HOST_EXPORTS)
+ (STAGE_HOST_EXPORTS, BASE_TARGET_EXPORTS, RAW_CXX_TARGET_EXPORTS)
+ (NORMAL_TARGET_EXPORTS): New macros. Use them in all the recursive
+ targets.
+ * Makefile.in: Regenerate.
+
+2005-05-24 Paolo Bonzini <bonzini@gnu.org>
+
+ * configure.in: Test the ability to symlink directories.
+ * configure: Regenerate.
+
+ * Makefile.def (bootstrap-stage): New definitions.
+ * Makefile.tpl (configure-stage1-gcc,
+ configure-stage2-gcc, configure-stage3-gcc,
+ all-stage1-gcc, all-stage2-gcc, all-stage3-gcc,
+ new-bootstrap, new-cleanstrap, new-restage1, new-restage2,
+ new-restage3, compare): Autogenerate, see Makefile.in
+ entry for behavioral changes.
+ (distclean-stage1, new-stage1-start, new-stage1-end,
+ new-stage1-bubble, distclean-stage2, new-stage2-start,
+ new-stage2-end, new-stage2-bubble, distclean-stage3,
+ new-stage3-start, new-stage3-end): New autogenerated targets.
+ (objext, prebootstrap, BOOT_CFLAGS,
+ POSTSTAGE1_FLAGS_TO_PASS): Move above the autogenerated
+ targets.
+
+ * Makefile.in: Regenerate.
+ (distclean-stage1, new-stage1-start, new-stage1-end,
+ new-stage1-bubble, distclean-stage2, new-stage2-start,
+ new-stage2-end, new-stage2-bubble, distclean-stage3,
+ new-stage3-start, new-stage3-end): New targets.
+ (all-stage1-gcc): Move prebootstrap dependency from here...
+ (configure-stage1-gcc): ...to here.
+ (new-bootstrap): Use bubble targets.
+ (new-cleanstrap, new-restage1, new-restage2, new-restage3):
+ Use per-stage distclean targets.
+ (configure-stage1-gcc, configure-stage2-gcc,
+ configure-stage3-gcc, all-stage1-gcc,
+ all-stage2-gcc, all-stage3-gcc, new-bootstrap):
+ Use new-stageN-start to prepare the tree.
+
+2004-05-23 Paolo Bonzini <bonzini@gnu.org>
+
+ * Makefile.def (host_modules): add libcpp.
+ * Makefile.tpl: Add dependencies on and for libcpp.
+ * Makefile.in: Regenerate.
+ * configure.in: Add libcpp host module.
+ * configure: Regenerate.
+
+2004-05-21 Paolo Bonzini <bonzini@gnu.org>
+
+ * Makefile.tpl: Whenever a recursive target is defined, wrap
+ it in a special @if/@endif block, and prepare its maybe
+ dependency in the @if/@endif block
+ * configure.in: Instead of writing maybe dependencies, remove
+ the @if/@endif statements, and remove the @if/@endif blocks
+ that remain.
+ * configure: Regenerate.
+ * Makefile.in: Regenerate.
+
+2004-05-20 Janis Johnson <janis187@us.ibm.com>
+
+ * MAINTAINERS (Various Maintainers): Add myself for compat testsuite.
+
+2004-05-18 Kaz Kojima <kkojima@gcc.gnu.org>
+
+ PR bootstrap/15120
+ * libtool.m4 (lt_cv_deplibs_check_method): Use pass_all on sh*.
+ * */configure: Rebuilt.
+
+2004-05-17 Zack Weinberg <zack@codesourcery.com>
+
+ * Makefile.def, Makefile.tpl, configure.in: Remove all mention
+ of libf2c.
+ * configure, Makefile.in: Regenerate.
+
+2004-05-13 Tobias Schlüter <tobi@gcc.gnu.org>
+
+ * MAINTAINERS (Write After Approval): Add myself.
+
+2004-05-13 Diego Novillo <dnovillo@redhat.com>
+
+ Merge from tree-ssa-20020619-branch.
+
+ * Makefile.def: Add libbanshee, libmudflap and libgfortran.
+ * Makefile.tpl (BUILD_CONFIGDIRS): Add libbanshee.
+ (HOST_GMPLIBS): Define.
+ (HOST_GMPINC): Define.
+ (TARGET_LIB_PATH): Add libmudflap.
+ (GFORTRAN_FOR_TARGET): Define.
+ (configure-build*): Export GFORTRAN.
+ (configure-gcc): Export GMPLIBS and GMPINC.
+ (all-gcc): Add maybe-all-libbanshee.
+ (configure-target-libgfortran): Define.
+ * Makefile.in: Regenerate.
+ * configure.in (host_libs): Add libbanshee.
+ (target_libraries): Add target-libmudflap and target-libgfortran.
+ Add --with-libbanshee.
+ Handle --disable-libmudflap.
+ (*-*-freebsd*): Use with_gmp.
+ Add $(libgcj) to noconfigdirs.
+ * configure: Regenerate.
+ * depcomp: New file.
+ * MAINTAINERS: Add tree-ssa maintainers.
+
+2004-05-04 Vladimir Makarov <vmakarov@redhat.com>
+
+ * MAINTAINERS (Various Maintainers): Add myself.
+
+2004-04-30 Brian Ford <ford@vss.fsi.com>
+
+ * MAINTAINERS (Write After Approval): Add myself.
+
+2004-04-29 Uros Bizjak <uros@kss-loka.si>
+
+ * MAINTAINERS (Write After Approval): Add myself.
+
+2004-04-28 Paolo Bonzini <bonzini@gnu.org>
+
+ * config/acx.m4: Fix fastcompare support for new-bootstrap.
+ * configure: Regenerate.
+
+2004-04-27 Paolo Bonzini <bonzini@gnu.org>
+
+ Revert:
+ 2004-04-26 Paolo Bonzini <bonzini@gnu.org>
+
+ * Makefile.def (flags_to_pass): Remove *dir variables that
+ are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
+ as well as prefix and exec_prefix.
+ * Makefile.in: Regenerate.
+
+2004-04-26 Robert Millan <robertmh@gnu.org>
+
+ Add patches from libtool CVS.
+ * libtool.m4: Add kfreebsd*-gnu and knetbsd*-gnu.
+ * ltconfig: Likewise.
+ * ltcf-c.sh: Likewise.
+ * ltcf-cxx.sh: Likewise.
+ * ltcf-gcj.sh: Likewise.
+
+2004-04-26 Paolo Bonzini <bonzini@gnu.org>
+
+ * Makefile.def (host_modules): Mark with the bootstrap
+ flag packages on which gcc depends.
+ * Makefile.tpl (all-bootstrap): Use it.
+ * Makefile.in: Regenerate.
+
+2004-04-26 Paolo Bonzini <bonzini@gnu.org>
+
+ * Makefile.def (flags_to_pass): Remove *dir variables that
+ are passed to the modules via TOPLEVEL_CONFIGURE_ARGUMENTS,
+ as well as prefix and exec_prefix.
+ * Makefile.in: Regenerate.
+
+2004-04-26 Paolo Bonzini <bonzini@gnu.org>
+
+ * configure.in: Invoke ACX_PROG_CMP_IGNORE_INITIAL.
+ * configure: Regenerate.
+ * config/acx.m4: Mutuate ACX_PROG_CMP_IGNORE_INITIAL from gcc.
+ * gcc/Makefile.tpl (compare): Use the result of the test.
+ * gcc/Makefile.in: Regenerate.
+
+2004-04-23 Paolo Bonzini <bonzini@gnu.org>
+
+ * Makefile.tpl (all-stage1-gcc, all-stage2-gcc, all-stage3-gcc):
+ Always relocate gcc and prev-gcc to the original names, even
+ if the build fails.
+ (new-cleanstrap, new-restage1, new-restage2, new-restage3):
+ New targets.
+
+2004-04-23 Laurent GUERBY <laurent@guerby.net>
+
+ * MAINTAINERS: Update my email address.
+
+2004-04-19 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
+
+ * configure.in (mips*-*-irix5*): Enable ld.
+ * configure: Regenerate.
+
+2004-04-16 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
+
+ * configure: Regenerate.
+
+2004-04-15 James E Wilson <wilson@specifixinc.com>
+
+ * Makefile.tpl (configure-[+module+], configure-gcc,
+ configure-stage1-gcc, configure-stage2-gcc, configure-stage3-gcc):
+ Set and export LDFLAGS.
+ * Makefile.in: Regenerate.
+
+2004-04-12 Michael Chastain <mec.gnu@mindspring.com>
+
+ * MAINTAINERS: Add myself to write-after-approval.
+
+2004-04-09 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ PR bootstrap/14871
+ * Makefile.tpl: If we don't have built-in-tree target tools,
+ use the ones found by configure rather than hacking around with
+ program_transform_name.
+ * configure.in: Give Makefile.tpl the information necessary
+ to do that.
+ * Makefile.in: Regenerate.
+ * configure: Regenerate.
+
+2004-04-06 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ PR bootstrap/14760
+ * configure.in: When computing baseargs, strip *all* copies of
+ offending options. Also, don't match/substitute the trailing space,
+ so that this actually works when two similar options are separated by
+ only one space.
+ * configure: Regenerate.
+
+2004-04-06 David Edelsohn <edelsohn@gnu.org>
+
+ * configure.in (powerpc-*-aix*): Remove target-libada from noconfigdirs.
+ (rs6000-*-aix*): Same.
+ * configure: Regenerate.
+
+2004-04-05 Ranjit Mathew <rmathew@hotmail.com>
+
+ * MAINTAINERS: Add myself to write-after-approval.
+
+2004-04-03 Bud Davis <bdavis9659@comcast.net>
+
+ * MAINTAINERS: Add myself to write-after-approval.
+
+2004-03-24 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl (top level bootstrap support): Remove now-unneeded
+ STRICT_WARN, WARN_CFLAGS flags passed down to make.
+ * Makefile.in: Regenerate.
+
+ * configure.in (top level bootstrap support): Rework --enable-werror
+ to set @stage2_werror_flag@.
+ * configure: Regenerate.
+ * Makefile.tpl (top level bootstrap support): Pass
+ @stage2_werror_flag@ down to configure in stages 2 and 3.
+ * Makefile.in: Regenerate.
+
+2004-03-23 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl (new-bootstrap): Set CC and CC_FOR_BUILD in configure
+ for stages 2 and 3 as well as in make. As a consequence, remove
+ OUTPUT_OPTION (now detected by configure) from the flags passed down
+ to make.
+ * Makefile.in: Regenerate.
+
+ * Makefile.tpl (new-bootstrap): Fix typo.
+ * Makefile.in: Regenerate.
+
+2004-03-22 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Rearrange by moving recursive_targets rules
+ into their proper sections.
+ * Makefile.tpl (top level bootstrap support): Move disabling
+ of coverage flags from 'make' to 'configure'; improve comments.
+ * Makefile.in: Regenerate.
+
+ * Makefile.tpl (experimental top level bootstrap) Move stage1
+ language setting from all- target to configure- target; disable
+ intermodule optimization in stage 1; prevent gratuitous rebuilds
+ of stage 1.
+ * Makefile.in: Regenerate.
+ * configure.in: Comma-separate stage 1 language list for top
+ level bootstrap.
+ * configure: Regenerate.
+
+ * Makefile.tpl: Clean up experimental top level bootstrap support:
+ note known problems; set CONFIG_SHELL; don't set BUILD_CC; relocate
+ prev-gcc in configure- targets as well as all- targets.
+ * Makefile.in: Regenerate.
+
+2004-03-21 Kelley Cook <kcook@gcc.gnu.org>
+
+ * compile: New file imported from automake.
+
+2004-03-17 Paolo Bonzini <bonzini@gnu.org>
+
+ * configure.in: Remove symbolic link section.
+ * configure: Regenerate.
+ * Makefile.tpl (links): Remove.
+ * Makefile.in: Regenerate.
+
+2004-03-15 Paolo Bonzini <bonzini@gnu.org>
+ Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * configure.in (DEFAULT_YACC, DEFAULT_M4, DEFAULT_LEX):
+ Set with AC_CHECK_PROGS.
+ * configure.in: Fix comment typo from last patch.
+ * configure: Regenerate.
+
+2004-03-15 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * Makefile.tpl: Introduce experimental top level bootstrap support.
+ * Makefile.in: Regenerate.
+ * configure.in: Introduce support for top level bootstrap.
+ * configure: Regenerate.
+
+2004-03-12 Eric Botcazou <ebotcazou@gcc.gnu.org>
+ Paolo Bonzini <bonzini@gnu.org>
+
+ PR bootstrap/14522
+ * configure.in: Cope with shells that do not support unquoted ^
+ * configure: Regenerate.
+
+2004-03-11 Eric Botcazou <ebotcazou@gcc.gnu.org>
+ Paolo Bonzini <bonzini@gnu.org>
+
+ PR bootstrap/14522
+ * configure.in: Cope with shells that do not support nesting
+ quotes inside quoted backquote substitutions.
+ * configure: Regenerate.
+
+2004-03-10 Andrew Pinski <pinskia@physics.uc.edu>
+
+ PR bootstrap/14522
+ * configure.in: Fix escaping of $.
+ * configure: Regenerate.
+
+2004-03-11 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ * configure: Regenerate, since I forgot to while committing Paolo's
+ changes.
+
+2004-03-08 Paolo Bonzini <bonzini@gnu.org>
+
+ PR ada/14131
+ Move language detection to the top level.
+ * configure.in: Find default values for the tools as
+ soon as possible. Disable ada if GNAT is not found.
+ Emit error message about missing languages. Expand
+ --enable-languages=all for the gcc subdirectory.
+
+2004-03-10 Ben Elliston <bje@gnu.org>
+
+ * MAINTAINERS: Update my email address.
+
+2004-03-05 David Edelsohn <edelsohn@gnu.org>
+
+ * ltconfig: Disable building static libraries if building shared
+ libraries on AIX 5L.
+
+2004-03-01 Richard Sandiford <rsandifo@redhat.com>
+
+ * configure.in (mips64*-*-linux*): Override mips*-*-linux* case
+ and disable libgcj.
+ * configure: Regenerated.
+
+2004-03-01 Brian Booth <bbooth@redhat.com>
+
+ * MAINTAINERS: Add myself to write-after-approval.
+
+2004-03-01 Paolo Bonzini <bonzini@gnu.org>
+
+ * MAINTAINERS: Add myself to write-after-approval.
+
+2004-02-28 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ PR bootstrap/7087
+ * Makefile.tpl: Guard XFOO sed statements better.
+ * Makefile.tpl: Add dependency for configure-target-libada.
+ * Makefile.in: Regenerate (incidentally fixes broken
+ commit when libada-branch was merged).
+
+2004-02-25 Kelley Cook <kcook@gcc.gnu.org>
+
+ * MAINTAINERS: Add myself to write-after-approval.
+
+2004-02-20 Andrew Pinski <pinskia@physics.uc.edu>
+
+ * MAINTAINERS: Add Nicola Pero and myself as libobjc
+ maintainers.
+
+2004-02-20 Andrew Cagney <cagney@redhat.com>
+
+ * config.guess: Update from version 2003-10-16 to 2004-02-16.
+ * config.sub: Update from version 2003-11-03 to 2004-02-16.
+
+2004-02-19 Nathanael Nerode <neroden@gcc.gnu.org>
+
+ PR bootstrap/11932
+ * mkinstalldirs, install-sh: Import from automake CVS HEAD.
+
+2004-02-14 Jerry Quinn <jlquinn@optonline.net>
+
+ * MAINTAINERS: Added myself to write-after-approval.
+
+2004-02-14 Michael Koch <konqueror@gmx.de>
+
+ * MAINTAINERS: Added myself to write-after-approval.
+
+2004-02-13 Joseph S. Myers <jsm@polyomino.org.uk>
+
+ * MAINTAINERS: Move Steve Chamberlain to write-after-approval. Move
+ some OS port maintainers to OS port maintainers section.
+
2004-02-13 Frank Ch. Eigler <fche@redhat.com>
* MAINTAINERS: Add self.
2004-02-12 Paolo Bonzini <bonzini@gnu.org>
* MAINTAINERS: Remove myself.
-
+
2004-02-11 David Edelsohn <edelsohn@gnu.org>
* configure.in (powerpc-*-aix*): Add target-libada to noconfigdirs.
Nathanael Nerode <neroden@gcc.gnu.org>
PR ada/6637, PR ada/5911
- Merge with libada-branch:
+ Merge with libada-branch:
* configure.in, Makefile.tpl, Makefile.def: Add target-libada,
with appropriate dependencies. Add --enable-libada configure switch.
* configure, Makefile.in: Regenerate.
2004-02-09 Paolo Bonzini <bonzini@gnu.org>
* MAINTAINERS: Add myself to write-after-approval.
-
+
2004-02-05 Rainer Orth <ro@TechFak.Uni-Bielefeld.DE>
* configure.in: Don't pass --with-stabs on IRIX 5 either.
2004-01-20 Caroline Tice <ctice@apple.com>
* MAINTAINERS: Add myself to write-after-approval.
-
+
2004-01-19 Paolo Carlini <pcarlini@suse.de>
* MAINTAINERS: Update my email address.
2004-01-18 James A. Morrison <ja2morri@uwaterloo.ca>
* MAINTAINERS: Add myself to write-after-approval.
-
+
2004-01-17 Volker Reichelt <reichelt@igpm.rwth-aachen.de>
* MAINTAINERS: Remove entries without email address.
* MAINTAINERS: Remove the mn10200 maintainer.
2003-12-21 Bernardo Innocenti <bernie@develer.com>
-
+
* configure.in (*-*-uclinux): Exclude newlib, libgloss and rda.
* configure: Regenerated.
2003-11-14 Arnaud Charlet <charlet@act-europe.fr>
- * Makefile.tpl (EXTRA_GCC_FLAGS): Pass BOOT_ADAFLAGS.
- * Makefile.in: Regenerate.
+ * Makefile.tpl (EXTRA_GCC_FLAGS): Pass BOOT_ADAFLAGS.
+ * Makefile.in: Regenerate.
2003-11-03 Ulrich Weigand <uweigand@de.ibm.com>
2003-09-04 Robert Millan <robertmh@gnu.org>
* configure.in: Match GNU/KFreeBSD with new kfreebsd*-gnu triplet.
-
+
2003-09-02 Kaveh R. Ghazi <ghazi@caip.rutgers.edu>
* configure.in: Ensure arguments to sed are properly spaced.
* configure.in: When testing with_libs and with_headers, treat
'no' as unset. Based on a patch by Dan Kegel <dank@kegel.com>.
* configure: Regenerate.
-
+
* configure.in (TOPLEVEL_CONFIGURE_ARGUMENTS): Quote properly for
make, shell, etc.
(baseargs): Likewise.
* config-ml.in, symlink-tree: Add license.
-2003-08-03 Richard Stallman <rms@gnu.org>
- Eben Moglen <moglen@columbia.edu>
+2003-08-03 Richard Stallman <rms@gnu.org>
+ Eben Moglen <moglen@columbia.edu>
* README.SCO: New file.