OSDN Git Service
Jeff Tinker [Fri, 18 Aug 2017 04:07:04 +0000 (04:07 +0000)]
Allow clearkey tests to run if no vendor modules
am:
5db2e67293
Change-Id: I594b8b5e9857d4a6c19d0847acf7c13949e13614
Jeff Tinker [Thu, 17 Aug 2017 17:09:32 +0000 (10:09 -0700)]
Allow clearkey tests to run if no vendor modules
DRM cannot skip all tests when vendor modules are
not present. Currently even the clearkey tests are
skipping when there is no vendor lib. This can be
replicated by just pushing the DRM VTS test binary
build from master (or DR or MR) and executing the
binary without VTS. All test cases skip (including
clearkey).
This change prevents exiting when no vendor
modules are found.
Test: Push the test binary and confirm that the
clearkey tests run.
bug:
64459011
Change-Id: Ic5f554d9b223d6ca4bf26f92f072254cc18f4620
TreeHugger Robot [Tue, 15 Aug 2017 20:44:58 +0000 (20:44 +0000)]
Merge "Camera: Switch 'cancelPictureFail' to 'cancelPictureNOP'" into oc-dr1-dev
Emilian Peev [Tue, 15 Aug 2017 20:27:50 +0000 (20:27 +0000)]
Merge "Camera: Switch 'cancelPictureFail' to 'cancelPictureNOP'" into oc-dev
am:
e2dae8c258
Change-Id: I396a157f3522843c3d36870719cb3e5176754dcc
TreeHugger Robot [Tue, 15 Aug 2017 20:17:11 +0000 (20:17 +0000)]
Merge "Camera: Switch 'cancelPictureFail' to 'cancelPictureNOP'" into oc-dev
Emilian Peev [Fri, 11 Aug 2017 09:33:22 +0000 (10:33 +0100)]
Camera: Switch 'cancelPictureFail' to 'cancelPictureNOP'
Calls to 'cancelPicture' should be no-ops in case image capture
is not active.
Bug:
64569316
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --primary-abi-only --module
VtsHalCameraProviderV2_4Target -l INFO
Merged-In: I5fad0a5b7aafd208c3a1b2f62a2b9046cde858d1
Change-Id: I5fad0a5b7aafd208c3a1b2f62a2b9046cde858d1
Tomasz Wasilczyk [Fri, 11 Aug 2017 22:16:16 +0000 (22:16 +0000)]
Merge "Update broadcastradio HAL 1.0 VTS tests." into oc-dev
am:
52af675d14
Change-Id: Ic5080cb6b22cd3984d0eb39d87cabf7c8a30178d
Tomasz Wasilczyk [Fri, 11 Aug 2017 22:11:31 +0000 (22:11 +0000)]
Merge "Update broadcastradio HAL 1.0 VTS tests." into oc-dev
Tomasz Wasilczyk [Tue, 8 Aug 2017 01:00:28 +0000 (18:00 -0700)]
Update broadcastradio HAL 1.0 VTS tests.
This is a cherry-pick of the following VTS changes from O MR1 to O:
- ag/
2462390: Fix Broadcast radio 1.0 VTS to not fail on
other radio types than AM/FM.
- ag/
2477726: Make tuned field description more precise and
fix VTS tests to obey it.
- ag/
2549733: Implement out-of-band metadata images (a test for in-band).
Additionally, it fixes config callback handling in OpenTunerTwice test.
Bug: b/
64324703
Test: VTS
Change-Id: I590b9b4d927fb0cd41f92e919343b5b94ad0e246
Merged-In: I590b9b4d927fb0cd41f92e919343b5b94ad0e246
Emilian Peev [Fri, 11 Aug 2017 09:33:22 +0000 (10:33 +0100)]
Camera: Switch 'cancelPictureFail' to 'cancelPictureNOP'
Calls to 'cancelPicture' should be no-ops in case image capture
is not active.
Merged-In: I5fad0a5b7aafd208c3a1b2f62a2b9046cde858d1
Bug:
64569316
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --primary-abi-only --module
VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I5fad0a5b7aafd208c3a1b2f62a2b9046cde858d1
TreeHugger Robot [Thu, 10 Aug 2017 03:05:38 +0000 (03:05 +0000)]
Merge "Bluetooth: Check the number of file descriptors" into oc-dr1-dev
TreeHugger Robot [Thu, 10 Aug 2017 00:35:17 +0000 (00:35 +0000)]
Merge "Bluetooth: Add OWNERS file for default/" into oc-dr1-dev
Myles Watson [Wed, 9 Aug 2017 18:27:40 +0000 (11:27 -0700)]
NFC: Add OWNERS file for default/
Test: build
Change-Id: I6e854923fdd66991bcc7ed3446106d148abea982
(cherry picked from commit
31439b1d24d49fcb431dfa48bdaa0b1d57deded4)
Myles Watson [Wed, 9 Aug 2017 18:27:15 +0000 (11:27 -0700)]
Bluetooth: Add OWNERS file for default/
Test: build
Change-Id: Ib4cbd5502ac0791d4bc700f28de68d0548256de6
(cherry picked from commit
7c127dc4cbf90713bcdbce89fa166228c912847d)
Myles Watson [Tue, 8 Aug 2017 23:00:30 +0000 (16:00 -0700)]
Bluetooth: Check the number of file descriptors
Opening the serial port(s) returns -1 when it fails, check
that the number of file descriptors is greater than 0 and
less than the size of the array.
Test: VtsHalBluetoothV1_0TargetTest, Bluetooth start/stop
Bug:
64420262
Change-Id: Icbffa5bd8c02030e389bac03aa5e1e78cc3c6057
(cherry picked from commit
89316af23eb7aa300015a3d80bc97891cfe6031e)
Peng Xu [Wed, 9 Aug 2017 17:04:32 +0000 (17:04 +0000)]
Merge "Skip direct report test if sensor is not available" into oc-dev
am:
63524f9fcc
Change-Id: Iffe683356ed925142ef877ecb5289463d8d4ac1e
TreeHugger Robot [Wed, 9 Aug 2017 16:48:07 +0000 (16:48 +0000)]
Merge "Skip direct report test if sensor is not available" into oc-dev
Roshan Pius [Tue, 8 Aug 2017 15:43:50 +0000 (08:43 -0700)]
wifi(vts): Remove a tight loop of toggling wifi state
The tight loop of HAL start/stop exposes a race condition within the HAL.
Adding a fix for preventing this race would need a fix which would be
pretty risky at this point of the release. The issue itself is unlikely
to happen in real use cases because wifi toggles (user initiated or test
scripts initiated) via framework goes through a series of processing
before it invokes the HAL start/stop.
Bug:
64195190
Test: `make vts -j30 BUILD_GOOGLE_VTS=true TARGET_PRODUCT=aosp_arm64 &&
vts-tradefed run commandAndExit vts --skip-all-system-status-check
--primary-abi-only --skip-preconditions --module VtsHalWifiV1_0Target -l
INFO`
Change-Id: I4e4d65f8b6e2e423a3a5f26e5a97a78b7e99c3e8
TreeHugger Robot [Wed, 9 Aug 2017 01:59:19 +0000 (01:59 +0000)]
Merge "Fix typo in in offload control VTS test" into oc-dr1-dev
Erik Kline [Tue, 8 Aug 2017 23:54:14 +0000 (16:54 -0700)]
Fix typo in in offload control VTS test
Test: built, flashed, run
Bug:
38220415
Bug:
64479437
Change-Id: I3aa4afa3b52297dd92e37b4f39a5bd25b129ba04
TreeHugger Robot [Tue, 8 Aug 2017 20:41:27 +0000 (20:41 +0000)]
Merge "Add the error code "OPERATION_NOT_ALLOWED" and log the error." into oc-dr1-dev
yinxu [Mon, 7 Aug 2017 17:29:10 +0000 (10:29 -0700)]
Add the error code "OPERATION_NOT_ALLOWED" and log the error.
Test: Telephony sanity tests, run vts -m VtsHalRadioV1_1Target
Bug:
64426938
Change-Id: Id4f06842186b10a52640372c23bc2b368cc1e9ab
Roshan Pius [Thu, 3 Aug 2017 22:05:05 +0000 (15:05 -0700)]
wifi(vts): Ignore IWifi.stop() returning ERROR_NOT_AVAILABLE
When IWifi.stop() is invoked back to back (happens in the ConfigureChip
vts test), the HAL would return ERROR_NOT_AVAILABLE if the previous stop
is still being processed. This is not an error that needs to fail the test,
but a legitimate status for stop. We have a retry mechanism to handle
this in both the VTS test and framework for the case where IWifi.start()
is invoked while the previous stop is being processed.
While there, corrected a few log messages emitted by the HAL to debug
such startup/stop issues better.
Bug:
63971806
Test: `vts-tradefed run commandAndExit vts --skip-all-system-status-check
--primary-abi-only --skip-preconditions --module VtsHalWifiV1_0Target -l
INFO`
Change-Id: I5e3470ac97541a6ea10aceec9b737e5d03ed5206
TreeHugger Robot [Tue, 8 Aug 2017 03:57:48 +0000 (03:57 +0000)]
Merge "Refactor and expand tetheroffload Control and Config VTS" into oc-dr1-dev
TreeHugger Robot [Tue, 8 Aug 2017 03:57:43 +0000 (03:57 +0000)]
Merge "Tetheroffload Control and Config VTS" into oc-dr1-dev
Ram Mohan M [Tue, 8 Aug 2017 00:47:23 +0000 (00:47 +0000)]
bug fix: handle OMX_EventBufferFlag events
am:
c8df8940e1
Change-Id: Ifa9493d869e42a76100011d5af20c5062bc44891
Ram Mohan M [Thu, 22 Jun 2017 08:23:12 +0000 (13:53 +0530)]
bug fix: handle OMX_EventBufferFlag events
OMX_EventBufferFlag event is sent when the component has processed a buffer
with its EOS flag set. This event is not sent by soft omx components.
Vendor components can send this. From IOMX point of view, this event is
not sent for processing
bug:
64102197
Merged-In: I3a978a885b1e4446f82f2356ae677f70ea6f8150
Change-Id: I3a978a885b1e4446f82f2356ae677f70ea6f8150
Erik Kline [Mon, 7 Aug 2017 18:32:45 +0000 (03:32 +0900)]
Refactor and expand tetheroffload Control and Config VTS
Test: as follows
- built
- flashed
- booted
- adb sync && adb shell ...$test
Bug:
38220415
Change-Id: Iab715c45ad0457f3eea43ee408fa947ffc01c4aa
Tyler Wear [Wed, 19 Jul 2017 20:48:57 +0000 (13:48 -0700)]
Tetheroffload Control and Config VTS
Basic VTS for Tetheroffload Config and Control HALs.
Bug:
38220415
Change-Id: I6d0867e019aca58d8a6bd1404b8b85ed98274f11
CRs-fixed:
2083182
Peng Xu [Thu, 3 Aug 2017 21:53:35 +0000 (14:53 -0700)]
Skip direct report test if sensor is not available
Skip SensorsHidlTest.*AshmemDirectReportOperation* tests if sensor
is not available on device.
Bug:
64230704
Test: compiles and test pass for a pixel device with mag sensor
masked in hal.
Change-Id: I9bfbea6301891eaa2b272bd3d15b0e237799b5d6
Ruchi Kandoi [Thu, 3 Aug 2017 19:04:38 +0000 (19:04 +0000)]
nfc: NCI 2.0: Add CORE_INIT_CMD for NCI 2.0
am:
029633dcd0
Change-Id: I7377ba90f9fe42f3d2880c5c9e6f494203050213
TreeHugger Robot [Thu, 3 Aug 2017 17:35:26 +0000 (17:35 +0000)]
Merge "graphics: ignore/reduce spurious vsync in VTS" into oc-dr1-dev
Ruchi Kandoi [Wed, 2 Aug 2017 00:30:17 +0000 (17:30 -0700)]
nfc: NCI 2.0: Add CORE_INIT_CMD for NCI 2.0
Bug:
64245250
Test: run vts test
Change-Id: I4ca434fb1fb44a6278942f020ddd02b162d7f605
(cherry picked from commit
c901276e6063e739b742435a161e51978c5f4ec5)
Yin-Chia Yeh [Wed, 2 Aug 2017 01:19:33 +0000 (01:19 +0000)]
Merge "Camera: reset callback after test done" into oc-dev
am:
72ff9a1e38 -s ours
Change-Id: I4cf59eaf2e9583af574d50f9ddb830eb34e3356d
TreeHugger Robot [Tue, 1 Aug 2017 21:40:35 +0000 (21:40 +0000)]
Merge "Camera: reset callback after test done" into oc-dev
sqian [Tue, 1 Aug 2017 19:21:55 +0000 (12:21 -0700)]
resolve merge conflicts of
345a396c to oc-dr1-dev
Test: I solemnly swear I tested this conflict resolution.
Change-Id: I5d816e17b2c8b113d07bf5e827d8c9378af761d9
Merged-In: I5d816e17b2c8b113d07bf5e827d8c9378af761d9
Shuo Qian [Tue, 1 Aug 2017 17:55:32 +0000 (17:55 +0000)]
Merge "Add EMPTY_RECORD for getDeviceIdentity" into oc-dev
sqian [Fri, 28 Jul 2017 18:28:27 +0000 (11:28 -0700)]
Add EMPTY_RECORD for getDeviceIdentity
Remove same unit test case with arguments "","0" for:
- sendEnvelope
- sendTerminalResponseToSim
- sendEnvelopeWithStatus
Test: verified by vendor, treehuger
Bug:
62926561
Change-Id: I5f535bdfc5821275a7ea2571d411374e0d7a8822
Merged-In: I5f535bdfc5821275a7ea2571d411374e0d7a8822
Shuo Qian [Tue, 1 Aug 2017 00:25:20 +0000 (00:25 +0000)]
Merge "Add corresponding error code to fix vts test" into oc-dev
am:
417af3a797 -s ours
Change-Id: I98205a431af725626f8f692d9b69d4c4c1f6fe5b
Shuo Qian [Tue, 1 Aug 2017 00:19:48 +0000 (00:19 +0000)]
Merge "Add corresponding error code to fix vts test" into oc-dev
Shuo Qian [Tue, 1 Aug 2017 00:19:33 +0000 (00:19 +0000)]
Merge "Add corresponding error code to fix vts test" into oc-dr1-dev
Kevin Rocard [Tue, 1 Aug 2017 00:05:16 +0000 (00:05 +0000)]
Merge "Audio policy config xsd: add missing gains and address in ports" into oc-dev
am:
90e68d31cf
Change-Id: I0aa31b2996c8aae97d0b7ba16d9943f47d70a1fe
TreeHugger Robot [Mon, 31 Jul 2017 23:56:02 +0000 (23:56 +0000)]
Merge "Audio policy config xsd: add missing gains and address in ports" into oc-dev
TreeHugger Robot [Mon, 31 Jul 2017 19:52:44 +0000 (19:52 +0000)]
Merge "Wifi Offload HAL: Improve VTS tests for scanConfig" into oc-dr1-dev
Emilian Peev [Mon, 31 Jul 2017 16:28:15 +0000 (16:28 +0000)]
Merge "NO PARTIAL RERUN Camera: Update stream consumer usage flag" into oc-dev
am:
456dc6cc86 -s ours
Change-Id: I10d00cc7a42127f5235a97dc72f76e608dfb5fea
TreeHugger Robot [Mon, 31 Jul 2017 16:22:23 +0000 (16:22 +0000)]
Merge "NO PARTIAL RERUN Camera: Update stream consumer usage flag" into oc-dev
TreeHugger Robot [Mon, 31 Jul 2017 16:21:44 +0000 (16:21 +0000)]
Merge "Camera: Update stream consumer usage flag" into oc-dr1-dev
Yin-Chia Yeh [Mon, 31 Jul 2017 08:55:46 +0000 (08:55 +0000)]
Camera: fix various VTS issues
am:
a0dd95d45d -s ours
Change-Id: Ib438269494c5c25f1759f7ec016cbca97bec9072
Emilian Peev [Wed, 26 Jul 2017 08:46:38 +0000 (09:46 +0100)]
NO PARTIAL RERUN Camera: Update stream consumer usage flag
It is possible that the current default consumer usage
flag may not be supported by some provider implementations.
Use either HW composer or some other flag that is appropriate
for the specific use case.
Merged-In: I04f89bf67166805191d6d40e5bd93c15ebc97ea6
Bug:
63913159
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --primary-abi-only --module
VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I04f89bf67166805191d6d40e5bd93c15ebc97ea6
Nathan Harold [Wed, 19 Jul 2017 23:48:44 +0000 (16:48 -0700)]
RadioV1_1 VTS Tests: startKeepalive, stopKeepalive
VTS tests for the initial implementaion of NATT
Keepalive support in the V1_1 HAL.
Bug:
63530561
Test: this
Change-Id: Iafabd4b0f8a8f4da78f65bf4061d47f4bfd69a7a
Yin-Chia Yeh [Wed, 26 Jul 2017 23:53:20 +0000 (16:53 -0700)]
Camera: fix various VTS issues
Also fix wrong return values for processCaptureRequest in default
wrapper.
Test: running camera VTS
Bug:
64041692
Change-Id: I397390af7c85a776713f6287bef1c4d11c721c9a
Merged-In: I397390af7c85a776713f6287bef1c4d11c721c9a
sqian [Mon, 24 Jul 2017 20:51:24 +0000 (13:51 -0700)]
Add corresponding error code to fix vts test
Test: run vts
Bug:
63152815
Bug:
62989786
Bug:
64041522
Change-Id: Ifbd17f85b39221de31ec7884b30dc176e1cbd3ab
Merged-In: Ifbd17f85b39221de31ec7884b30dc176e1cbd3ab
Shuo Qian [Fri, 28 Jul 2017 19:15:45 +0000 (19:15 +0000)]
Merge "Add vts test for setCarrierInfoForImsiEncryption" into oc-dr1-dev
TreeHugger Robot [Fri, 28 Jul 2017 02:47:05 +0000 (02:47 +0000)]
Merge "wifi(hidl): Modify the SAR power levels interface" into oc-dr1-dev
Yin-Chia Yeh [Thu, 27 Jul 2017 23:08:56 +0000 (23:08 +0000)]
Merge "Camera: fix various VTS issues" into oc-dr1-dev
Kevin Rocard [Thu, 27 Jul 2017 18:41:53 +0000 (11:41 -0700)]
Audio policy config xsd: add missing gains and address in ports
No nexus/pixel device uses port gains and their configuration were taken
as reference for the xsd creation.
Gains in mixPort and devicePort are supported by the code and use by
oem. As a result the xsd should allow them.
For validation of this path, the xsd was run against the example xml in
the audiopolicy source. Several other misalignment were found. They will
be fix in an other patch.
The address is also an optional field that was forgotten for the same
reason.
Bug: b/
63827061
Test: -noout xmllint --schema hardware/interfaces/audio/2.0/config/audio_policy_configuration.xsd frameworks/av/services/audiopolicy/config/audio_policy_configuration.xml
Test: the above command fails for some other xml node unrelated to this bug
Test: this is tracked by b/
38184704
Change-Id: I8dae15eb85a6a6d43c87aa747daf92a88d3fdcc0
Signed-off-by: Kevin Rocard <krocard@google.com>
sqian [Thu, 27 Jul 2017 21:59:38 +0000 (14:59 -0700)]
Add vts test for setCarrierInfoForImsiEncryption
Currently there is no implementation for this api by vendor code.
So we should check only for REQUEST_NOT_SUPPPORTED or NONE
as error returned at present.
Test: run vts
Bug:
64073713
Change-Id: I27f544cf6521d2f913f97e1b8f662a05166ddc11
Roshan Pius [Tue, 25 Jul 2017 15:48:08 +0000 (08:48 -0700)]
wifi(hidl): Modify the SAR power levels interface
Modifying the interface used to lower the tx power level for meeting SAR
requirements based on recommendation from the nexus hardware team. The
previous interface passed in a single power value in dBm for meeting SAR
requirements. However, the SAR requirements are more complex than that.
Based on the connection mode (802.11 a,b,g,n,ac) and the number of
streams that are active (MIMO), the SAR power levels are very
different. Using the previous interface would mean that we will have to
use the lowest power level among all the connection modes to meet the SAR
requirements. This would however result in us lowering the power much
more than needed (~2 dBm) for many connection modes.
Instead, we're switching to a more generic interface where the framework
informs the wifi chip that we're entering a special tx power mode scenario
(today, there is only 1 for voice call). The chip can then lookup the
extensive table of power levels for different connection modes which are
pre-populated by the OEM's in the BDF file to set the power level (depending
on the scenario framework sends and the active connection mode).
Bug:
62437848
Test: Manual tests
Change-Id: I5ee3f0d2c130958dbeb352e3b5ad9407f432624f
sqian [Mon, 24 Jul 2017 21:05:29 +0000 (14:05 -0700)]
Add corresponding error code to fix vts test
Test: run vts
Bug:
63152815
Bug:
62989786
Bug:
64041522
Change-Id: Ifbd17f85b39221de31ec7884b30dc176e1cbd3ab
Merged-In: Ifbd17f85b39221de31ec7884b30dc176e1cbd3ab
Yin-Chia Yeh [Wed, 26 Jul 2017 23:53:20 +0000 (16:53 -0700)]
Camera: fix various VTS issues
Also fix wrong return values for processCaptureRequest in default
wrapper.
Test: running camera VTS
Bug:
64041692
Change-Id: I397390af7c85a776713f6287bef1c4d11c721c9a
Merged-In: I397390af7c85a776713f6287bef1c4d11c721c9a
TreeHugger Robot [Wed, 26 Jul 2017 21:28:45 +0000 (21:28 +0000)]
Merge "Camera: reset callback after test done" into oc-dr1-dev
Sohani Rao [Wed, 26 Jul 2017 18:27:49 +0000 (11:27 -0700)]
Wifi Offload HAL: Improve VTS tests for scanConfig
Configure scans with test parameters from the Offload HAL service.
Bug:
36865676
Test: VTS tests
Change-Id: Iec5a3e837f9a2e2cf285b079a4630ff273727679
Ying Xu [Wed, 26 Jul 2017 17:46:56 +0000 (17:46 +0000)]
Merge "Fix VTS errors of the network scan API" into oc-dr1-dev
Emilian Peev [Wed, 26 Jul 2017 08:46:38 +0000 (09:46 +0100)]
Camera: Update stream consumer usage flag
It is possible that the current default consumer usage
flag may not be supported by some provider implementations.
Use either HW composer or some other flag that is appropriate
for the specific use case.
Merged-In: I04f89bf67166805191d6d40e5bd93c15ebc97ea6
Bug:
63913159
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --primary-abi-only --module
VtsHalCameraProviderV2_4Target -l INFO
Change-Id: I04f89bf67166805191d6d40e5bd93c15ebc97ea6
Zhuoyao Zhang [Wed, 26 Jul 2017 03:15:14 +0000 (03:15 +0000)]
Merge "Move android.hardware.tests.msgq@1.0-impl to system.img" into oc-dr1-dev
Zhuoyao Zhang [Wed, 26 Jul 2017 03:15:14 +0000 (03:15 +0000)]
Merge "Move all hidl_test dependencies to the system.img" into oc-dr1-dev
yinxu [Tue, 25 Jul 2017 22:15:52 +0000 (15:15 -0700)]
Fix VTS errors of the network scan API
Since the new network scan API is only supported by some devices, we
should add the REQUEST_NOT_SUPPORTED to the possible returned errors.
Test: Telephony sanity tests, run vts -m VtsHalRadioV1_1Target
Bug:
63914600
Change-Id: I965ee6422aaa5e02bf67466f5288b808183f1738
Eino-Ville Talvala [Tue, 25 Jul 2017 21:09:48 +0000 (21:09 +0000)]
Merge "Camera: Don't enforce result metadata queue support" into oc-dev
am:
1d1b503b77 -s ours
Change-Id: If9f4aa85e57aabf7dfb393813ab13eff78967a16
Eino-Ville Talvala [Tue, 25 Jul 2017 20:58:44 +0000 (20:58 +0000)]
Merge "Camera: Don't enforce result metadata queue support" into oc-dev
Eino-Ville Talvala [Tue, 25 Jul 2017 20:54:34 +0000 (20:54 +0000)]
Merge "Camera: Don't enforce result metadata queue support" into oc-dr1-dev
Steven Moreland [Fri, 14 Jul 2017 20:34:03 +0000 (13:34 -0700)]
Move all hidl_test dependencies to the system.img
Test: hidl_test passes
Test: build with BOARD_VNDK_VERSION=current
Bug:
63704014
Change-Id: Ia97be8b4d61236adfd964bf8e4fa632d99010b98
Merged-In: Ia97be8b4d61236adfd964bf8e4fa632d99010b98
(cherry picked from commit
2f2aabe2123dfdc35c0499c028fd5ab0ce3c9585)
Zhuoyao Zhang [Fri, 21 Jul 2017 17:53:24 +0000 (10:53 -0700)]
Move android.hardware.tests.msgq@1.0-impl to system.img
Bug:
63704014
Test: make vts
vts-tradefed run vts -m VtsFmqUnitTest.
Change-Id: I0deb28ffdbd437cc05d9c1efed63e0ba9dc3a048
Merged-In: I0deb28ffdbd437cc05d9c1efed63e0ba9dc3a048
(cherry picked from commit
ea35563b799f6c9866500e8d365e0516e1971ca1)
(cherry picked from commit
1d42476fdcd631fcf97d2ccf24996c8b7edd7521)
Emilian Peev [Mon, 24 Jul 2017 15:29:54 +0000 (16:29 +0100)]
Camera: Don't enforce result metadata queue support
Some provider implementations could still be using direct
transfer of the result metadata through hw binder.
Merged-In: Ib2adaff005af77385767a32c1ed069371a6e9b7a
Bug:
63970723
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: Ib2adaff005af77385767a32c1ed069371a6e9b7a
Emilian Peev [Mon, 24 Jul 2017 15:29:54 +0000 (16:29 +0100)]
Camera: Don't enforce result metadata queue support
Some provider implementations could still be using direct
transfer of the result metadata through hw binder.
Merged-In: Ib2adaff005af77385767a32c1ed069371a6e9b7a
Bug:
63970723
Test: vts-tradefed run commandAndExit vts --skip-all-system-status-check
--skip-preconditions --module VtsHalCameraProviderV2_4Target -l INFO
Change-Id: Ib2adaff005af77385767a32c1ed069371a6e9b7a
Andrew Scull [Tue, 25 Jul 2017 12:09:02 +0000 (12:09 +0000)]
Merge "Weaver: functional VTS tests" into oc-dr1-dev
Andrew Scull [Tue, 25 Jul 2017 12:08:56 +0000 (12:08 +0000)]
Merge "OemLock functional VTS test." into oc-dr1-dev
Roshan Pius [Tue, 25 Jul 2017 06:44:52 +0000 (06:44 +0000)]
supplicant(vts): Remove start/stop framework
am:
80599435bd
Change-Id: Ie80ce57759f12b4b2b833b457a11c2b3650560ba
Roshan Pius [Mon, 24 Jul 2017 21:13:48 +0000 (14:13 -0700)]
supplicant(vts): Remove start/stop framework
This is already done by the test harness on the host side. So, no need
to invoke this from within the gtest.
Bug:
63914399
Test: `make vts -j30 BUILD_GOOGLE_VTS=true TARGET_PRODUCT=aosp_arm64 &&
vts-tradefed run commandAndExit vts --skip-all-system-status-check
--primary-abi-only --skip-preconditions --module
VtsHalWifiSupplicantV1_0Target -l INFO`
Change-Id: I43edc03492bf5e03f9a4236265c43baa5efcd61d
(cherry picked from commit
145cce98b56674404a6148835f008df44086db2e)
Merged-Id: I43edc03492bf5e03f9a4236265c43baa5efcd61d
Shuo Qian [Tue, 25 Jul 2017 00:22:25 +0000 (00:22 +0000)]
Merge "Add Sim absent assertion in the 1.0 setup" into oc-dev
am:
5b472ec138
Change-Id: Ib90407dd470f88dddf5d8037e459e22b534c8b10
Shuo Qian [Tue, 25 Jul 2017 00:14:21 +0000 (00:14 +0000)]
Merge "Add Sim absent assertion in the 1.0 setup" into oc-dev
Shuo Qian [Tue, 25 Jul 2017 00:14:00 +0000 (00:14 +0000)]
Merge "Add Sim absent assertion in the setup" into oc-dr1-dev
TreeHugger Robot [Mon, 24 Jul 2017 23:26:12 +0000 (23:26 +0000)]
Merge "Update VTS tests so that more tests pass for O." into oc-dr1-dev
Roshan Pius [Mon, 24 Jul 2017 23:07:54 +0000 (23:07 +0000)]
Merge "supplicant(vts): Remove start/stop framework" into oc-dr1-dev
Roshan Pius [Mon, 24 Jul 2017 21:13:48 +0000 (14:13 -0700)]
supplicant(vts): Remove start/stop framework
This is already done by the test harness on the host side. So, no need
to invoke this from within the gtest.
Bug:
63914399
Test: `make vts -j30 BUILD_GOOGLE_VTS=true TARGET_PRODUCT=aosp_arm64 &&
vts-tradefed run commandAndExit vts --skip-all-system-status-check
--primary-abi-only --skip-preconditions --module
VtsHalWifiSupplicantV1_0Target -l INFO`
Change-Id: I43edc03492bf5e03f9a4236265c43baa5efcd61d
Chia-I Wu [Mon, 24 Jul 2017 18:11:01 +0000 (11:11 -0700)]
graphics: ignore/reduce spurious vsync in VTS
Bug:
62802718
Test: VTS
Change-Id: I1ed73e0b2f14414f540865a96e6bd5ac1599fbf3
Sanket Padawe [Sun, 23 Jul 2017 00:58:02 +0000 (17:58 -0700)]
Update VTS tests so that more tests pass for O.
Cherry picked from ag/
2562201
Bug: b/
62926561
Test: vts tests
Change-Id: Ic927f9efd437c6411fb14feac8c681334e4b5e60
Merged-in: Ic927f9efd437c6411fb14feac8c681334e4b5e60
Stanley Tng [Sat, 22 Jul 2017 15:57:52 +0000 (15:57 +0000)]
Merge "Fixed the HCI ACL Header definitions for PB and BC Flags" into oc-dev
am:
ad6b1eb846
Change-Id: I1636ac9ff75062d170db6032b8e657a0f5b29f54
TreeHugger Robot [Sat, 22 Jul 2017 15:51:40 +0000 (15:51 +0000)]
Merge "Fixed the HCI ACL Header definitions for PB and BC Flags" into oc-dev
Stanley Tng [Wed, 19 Jul 2017 17:55:01 +0000 (10:55 -0700)]
Fixed the HCI ACL Header definitions for PB and BC Flags
The byte offsets for Packet Boundary (PB) and Broadcast (BC) flags
in the HCI ACL Header is swapped. This will fixed it so that it matches
the Bluetooth Specifications.
Bug:
63241720
Test: Run manual VTS tests for Bluetooth
Change-Id: Ifc1f4d4f054a1dab13458c563e47bfb884f39d92
(cherry picked from commit
7915b71fb9fdc8a378b2aae9b618d67bf64d4971)
Legler Wu [Sat, 22 Jul 2017 07:04:55 +0000 (07:04 +0000)]
Update VTS tests so that Mediatek pass more VTS for O.
am:
b36443a864 -s ours
Change-Id: I18dd1802cca630e3b9603c5decf3c2e2becffde7
Legler Wu [Fri, 30 Jun 2017 03:00:07 +0000 (11:00 +0800)]
Update VTS tests so that Mediatek pass more VTS for O.
Bug: b/
62926561
Test: vts tests
Change-Id: Ic927f9efd437c6411fb14feac8c681334e4b5e60
Merged-in: Ic927f9efd437c6411fb14feac8c681334e4b5e60
sqian [Fri, 21 Jul 2017 18:49:03 +0000 (11:49 -0700)]
Add Sim absent assertion in the 1.0 setup
Currently the VTS tests for radio are for Sim Absent only. Adding this
assertion in the set up before running VTS tests clarifies the current
tests running is for sim absent only.
Test: run vts
Bug:
63898623
Change-Id: Ie09fb8bcedfd0b35b14f0a70952f44b6f6b082aa
sqian [Fri, 21 Jul 2017 18:18:17 +0000 (11:18 -0700)]
Add Sim absent assertion in the setup
Currently the VTS tests for radio are for Sim Absent only. Adding this
assertion in the set up before running VTS tests clarifies the current
tests running is for sim absent only.
Test: run vts
Bug:
63898623
Change-Id: I0017dd1b3939348b183ce19a5ec4cbc977946cc1
Shuo Qian [Fri, 21 Jul 2017 19:10:10 +0000 (19:10 +0000)]
Merge "Update IRadioResponse.hal documentation" into oc-dev
am:
7c60d26763 -s ours
Change-Id: I6d1a967b66a26158052909c9cf4721e3e77b72e5
Shuo Qian [Fri, 21 Jul 2017 18:58:12 +0000 (18:58 +0000)]
Merge "Update IRadioResponse.hal documentation" into oc-dev
Etan Cohen [Fri, 21 Jul 2017 03:18:16 +0000 (03:18 +0000)]
Merge "[HAL] Invalidate chip before shutting down legacy HAL" into oc-dr1-dev
Shuo Qian [Fri, 21 Jul 2017 00:03:57 +0000 (00:03 +0000)]
Merge "Fix some VTS for 2017 devices" into oc-dev
am:
41b188be76 -s ours
Change-Id: Ic1f9a9b296fdd34837e2927a367b265a82c909a4
Shuo Qian [Thu, 20 Jul 2017 23:57:25 +0000 (23:57 +0000)]
Merge "Fix some VTS for 2017 devices" into oc-dev
Yin-Chia Yeh [Tue, 11 Jul 2017 20:44:35 +0000 (13:44 -0700)]
Camera: reset callback after test done
Test: VTS test pass
Bug:
63570734
Change-Id: Ia7b1e8e9baae2885d9c43821fe2933df883f7892
Merged-In: Ic0eecaf843b5c2e78f60325090ea652d43a74a0b
Ying Xu [Thu, 20 Jul 2017 16:37:11 +0000 (16:37 +0000)]
Merge " Add VTS code for the network scan API" into oc-dr1-dev