git.sourceforge.jp Git - tomoyo/tomoyo-test1.git/log

(root) / tomoyo / tomoyo-test1.git / log

Arnd Bergmann [Fri, 14 Apr 2023 15:54:35 +0000 (17:54 +0200)]

Merge tag 'qcom-arm64-for-6.4' of https://git./linux/kernel/git/qcom/linux into soc/dt

Qualcomm ARM64 updates for v6.4

PCI I/O and MEM ranges are corrected across all targets with PCIe
enabled. Likewise is CPU clocks defined to be provided from CPUfreq for
a wide range of platforms, to satisfy the OPP definitions, and LLCC bank
information is corrected for all relevant platforms.

IPQ5332 gains SMEM, CPUfreq and support for triggering download mode.
The MI01.2 board is introduced.

On MSM8916 WCN compatibles are moved to be defined per board, to avoid
issues when boards rely on the incorrect defaults. Support for Yiming
UZ801 4G modem stick is introduced.

XO clock is defined and fed to RPMCC on MSM8953 and MSM8976, to ensure
clock trees are properly rooted. DSI clocks feeding into gcc are
described on MSM8953.

On MSM8996 the external audio components are moved from the SoC dtsi. A
few DWC3 quirks are added.

On MSM8998 GPIO names are introduced for Sony Xperia XZ Premium, XZ1 and
XZ1 Compact. A numbe of boards have GPIO keys properly marked as
wakeup-source.

The SA8775P platform is extended with CPUfreq, UARTs, I2C controllers,
SPI controllers, SPMI and PMICs, PDC support. The associated PMICs gains
reset and power key support, as well as thermal zones defined. Nodes are
sorted. On top of this the SA8775P Ride board/platform is introduced.

On SC7180 and SC7280 a range of fixes coming from DeviceTree validation are
introduced, some clearing up unused properties, others correcting
errors. A number of Google rev0 boards on SC7180 are dropped, as these
are not considered to be in use by anyone anymore.

On SC8280XP RTC support is introduced and enabled for the CRD and Lenovo
Thinkpad X13s. It gains another UART, upon which Bluetooth is enabled on
the Lenovo ThinkPad X13s. The touchpad definition is altered to attempt
to probe both devices seen in the wild. A number of bug fixes are also
introduced, and the regulator definitions on X13s are corrected.

On SDM845 dynamic power coefficients are improved. BWMON compatible is
corrected. Xiaomi Pocophone F1 gains notification LED. Sony Xperia XZ2,
XZ2 Compact and XZ3 gains display, touchscreen, gpu and remoteproc
support. OnePlus 6 and 6T gains hall sensor.

GPU clock controller and remoteproc nodes are added for SM6115. CPU
clock are defined to come from CPUfreq. Board-specific USB-properties
are moved out of the SoC dtsi.

On SM6375 L3 scaling, IMEM, RMTFS, RPM sleep stats, Tsens, modem
remoteproc and WiFi nodes are added. Tsens thermal zones are defined and additional low power states
are defined. Sony Xperia 10 IV gains volume down key support.

On SM8150 another UART is introduced, to be used by GNSS on the SA8155
ADP. Support for the Flash LED block in PM8150L is added.

On SM8250 TPDM MM and PRNG is defined, MHI region is added to PCIe node.
A few bug fixes are introduced after Devicetree validation.

The DisplayPort controller on both SM8350 and SM8450 is defined and the
related QMP instance is transitioned to the USB3/DP combo variant. IMEM
and PIL info is introduced, for post mortem debugging of remoteprocs. On
the HDK PMIC GLINK is enabled and role switch is enabled. Some audio
resources are corrected.

A typo in the USB role property of the Microsoft Surface is corrected,
thanks to DeviceTree validation.

PCIe controllers and PHYs descriptions are corrected, and pinctrl state
definitions are moved from the soc to the board definition. BWMON
compatibles are corrected. PM8550B gains the definition of the eUSB2
repeater and this is enabled on the MTP. PMIC GLINK is also defined for
the MTP and connected to DWC3, for role switching support.

In addition to this, a range of cleanups based on Devicetree validation
is introduced.

A few clock bindings are introduced, from topic-branches shared with the
clock tree, to aid introduction of references to these.

* tag 'qcom-arm64-for-6.4' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (256 commits)
  arm64: dts: qcom: sc8280xp-x13s: Add bluetooth
  arm64: dts: qcom: sc8280xp: Define uart2
  arm64: dts: qcom: sc8280xp: Add "mhi" region to the PCIe nodes
  arm64: dts: qcom: sm8250: Add "mhi" region to the PCIe nodes
  arm64: dts: qcom: sdm845: Add "mhi" region to the PCIe nodes
  arm64: dts: qcom: sa8775p-ride: set gpio-line-names for PMIC GPIOs
  arm64: dts: qcom: sa8775p: add PMIC GPIO controller nodes
  arm64: dts: qcom: sa8775p: pmic: add thermal zones
  arm64: dts: qcom: sa8775p: pmic: add support for the pmm8654 RESIN input
  arm64: dts: qcom: sa8775p: pmic: add the power key
  arm64: dts: qcom: sa8775p: add the Power On device node
  arm64: dts: qcom: sa8775p: add support for the on-board PMICs
  arm64: dts: qcom: sa8775p: add the spmi node
  arm64: dts: qcom: sa8775p: add the pdc node
  arm64: dts: qcom: sa8775p: sort soc nodes by reg property
  arm64: dts: qcom: sa8775p: pad reg properties to 8 digits
  arm64: dts: qcom: sc8280xp: correct Soundwire wakeup interrupt name
  arm64: dts: qcom: sdm845-tama: Enable GPI_DMA0/1
  arm64: dts: qcom: sdm845-tama: Enable GPU
  arm64: dts: qcom: sdm845-tama: Enable remoteprocs
  ...

Link: https://lore.kernel.org/r/20230410170233.5931-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>