Introduce -fno-debug-types-section flag.

        * common.opt (fdebug-types-section): New flag.
        * doc/invoke.texi: Document new -fno-debug-types-section flag.
        * dwarf2out.c (use_debug_types): New define.
        (struct die_struct): Mark die_id with GTY desc use_debug_types.
        (print_die): Guard output of type unit signatures using
        use_debug_types.
        (build_abbrev_table): Replace assert of dwarf_version >= 4
        with assert on use_debug_types.
        (size_of_die): Likewise.
        (unmark_dies): Likewise.
        (value_format): Decide AT_ref_external form on use_debug_types.
        (output_die): Replace dwarf_version version check guard with
        use_debug_types where appropriate.
        (modified_type_die): Likewise.
        (gen_reference_type_die): Likewise.
        (dwarf2out_start_source_file): Likewise.
        (dwarf2out_end_source_file): Likewise.
        (prune_unused_types_walk_attribs): Likewise.
        (dwarf2out_finish): Likewise.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@171742 138bc75d-0d04-0410-961f-82ee72b054a4

diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index d84d2b3..4a0ac4a 100644 (file)
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,3 +1,25 @@
+2011-03-29  Mark Wielaard  <mjw@redhat.com>
+
+       * common.opt (fdebug-types-section): New flag.
+       * doc/invoke.texi: Document new -fno-debug-types-section flag.
+       * dwarf2out.c (use_debug_types): New define.
+       (struct die_struct): Mark die_id with GTY desc use_debug_types.
+       (print_die): Guard output of type unit signatures using
+       use_debug_types.
+       (build_abbrev_table): Replace assert of dwarf_version >= 4
+       with assert on use_debug_types.
+       (size_of_die): Likewise.
+       (unmark_dies): Likewise.
+       (value_format): Decide AT_ref_external form on use_debug_types.
+       (output_die): Replace dwarf_version version check guard with
+       use_debug_types where appropriate.
+       (modified_type_die): Likewise.
+       (gen_reference_type_die): Likewise.
+       (dwarf2out_start_source_file): Likewise.
+       (dwarf2out_end_source_file): Likewise.
+       (prune_unused_types_walk_attribs): Likewise.
+       (dwarf2out_finish): Likewise.
+
 2011-03-30  Vladimir Makarov  <vmakarov@redhat.com>
 
        * ira-color.c (ira_assign_hard_reg): Use only one variable 'mode'.

diff --git a/gcc/common.opt b/gcc/common.opt
index 88ae101..213645c 100644 (file)
--- a/gcc/common.opt
+++ b/gcc/common.opt
@@ -1012,6 +1012,10 @@ femit-class-debug-always
 Common Report Var(flag_emit_class_debug_always) Init(0)
 Do not suppress C++ class debug information.
 
+fdebug-types-section
+Common Report Var(flag_debug_types_section) Init(1)
+Output .debug_types section when using DWARF v4 debuginfo.
+
 fexceptions
 Common Report Var(flag_exceptions) Optimization
 Enable exception handling

diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi
index 85bf2b4..928e322 100644 (file)
--- a/gcc/doc/invoke.texi
+++ b/gcc/doc/invoke.texi
@@ -312,7 +312,8 @@ Objective-C and Objective-C++ Dialects}.
 -fdump-final-insns=@var{file} @gol
 -fcompare-debug@r{[}=@var{opts}@r{]}  -fcompare-debug-second @gol
 -feliminate-dwarf2-dups -feliminate-unused-debug-types @gol
--feliminate-unused-debug-symbols -femit-class-debug-always @gol
+-feliminate-unused-debug-symbols -femit-class-debug-always
+-fdebug-types-section @gol
 -fmem-report -fpre-ipa-mem-report -fpost-ipa-mem-report -fprofile-arcs @gol
 -frandom-seed=@var{string} -fsched-verbose=@var{n} @gol
 -fsel-sched-verbose -fsel-sched-dump-cfg -fsel-sched-pipelining-verbose @gol
@@ -4585,6 +4586,15 @@ normally emits debugging information for classes because using this
 option will increase the size of debugging information by as much as a
 factor of two.
 
+@item -fno-debug-types-section
+@opindex fno-types-section
+@opindex ftypes-section
+By default when using Dwarf v4 or higher type DIEs will be put into
+their own .debug_types section instead of making them part of the
+.debug_info section.  It is more efficient to put them in a separate
+comdat sections since the linker will then be able to remove duplicates.
+But not all dwarf consumers support .debug_types sections yet.
+
 @item -gstabs+
 @opindex gstabs+
 Produce debugging information in stabs format (if that is supported),

diff --git a/gcc/dwarf2out.c b/gcc/dwarf2out.c
index efd30ea..91be9a4 100644 (file)
--- a/gcc/dwarf2out.c
+++ b/gcc/dwarf2out.c
@@ -5800,6 +5800,16 @@ const struct gcc_debug_hooks dwarf2_debug_hooks =
    representation is done after the entire program has been compiled.
    The types below are used to describe the internal representation.  */
 
+/* Whether to put type DIEs into their own section .debug_types instead
+   of making them part of the .debug_info section.  Only supported for
+   Dwarf V4 or higher and the user didn't disable them through
+   -fno-debug-types-section.  It is more efficient to put them in a
+   separate comdat sections since the linker will then be able to
+   remove duplicates.  But not all tools support .debug_types sections
+   yet.  */
+
+#define use_debug_types (dwarf_version >= 4 && flag_debug_types_section)
+
 /* Various DIE's use offsets relative to the beginning of the
    .debug_info section to refer to each other.  */
 
@@ -5858,7 +5868,7 @@ typedef struct GTY((chain_circular ("%h.die_sib"))) die_struct {
       char * GTY ((tag ("0"))) die_symbol;
       comdat_type_node_ref GTY ((tag ("1"))) die_type_node;
     }
-  GTY ((desc ("dwarf_version >= 4"))) die_id;
+  GTY ((desc ("use_debug_types"))) die_id;
   VEC(dw_attr_node,gc) * die_attr;
   dw_die_ref die_parent;
   dw_die_ref die_child;
@@ -8560,7 +8570,7 @@ print_die (dw_die_ref die, FILE *outfile)
   fprintf (outfile, " offset: %ld", die->die_offset);
   fprintf (outfile, " mark: %d\n", die->die_mark);
 
-  if (dwarf_version >= 4 && die->die_id.die_type_node)
+  if (use_debug_types && die->die_id.die_type_node)
     {
       print_spaces (outfile);
       fprintf (outfile, "  signature: ");
@@ -8612,13 +8622,13 @@ print_die (dw_die_ref die, FILE *outfile)
        case dw_val_class_die_ref:
          if (AT_ref (a) != NULL)
            {
-             if (dwarf_version >= 4 && AT_ref (a)->die_id.die_type_node)
+             if (use_debug_types && AT_ref (a)->die_id.die_type_node)
                {
                  fprintf (outfile, "die -> signature: ");
                  print_signature (outfile,
                                   AT_ref (a)->die_id.die_type_node->signature);
                 }
-             else if (dwarf_version < 4 && AT_ref (a)->die_id.die_symbol)
+             else if (! use_debug_types && AT_ref (a)->die_id.die_symbol)
                fprintf (outfile, "die -> label: %s",
                         AT_ref (a)->die_id.die_symbol);
              else
@@ -10575,7 +10585,7 @@ build_abbrev_table (dw_die_ref die)
     if (AT_class (a) == dw_val_class_die_ref
        && AT_ref (a)->die_mark == 0)
       {
-       gcc_assert (dwarf_version >= 4 || AT_ref (a)->die_id.die_symbol);
+       gcc_assert (use_debug_types || AT_ref (a)->die_id.die_symbol);
        set_AT_ref_external (a, 1);
       }
 
@@ -10723,7 +10733,7 @@ size_of_die (dw_die_ref die)
                 we use DW_FORM_ref_addr.  In DWARF2, DW_FORM_ref_addr
                 is sized by target address length, whereas in DWARF3
                 it's always sized as an offset.  */
-             if (dwarf_version >= 4)
+             if (use_debug_types)
                size += DWARF_TYPE_SIGNATURE_SIZE;
              else if (dwarf_version == 2)
                size += DWARF2_ADDR_SIZE;
@@ -10809,7 +10819,7 @@ unmark_dies (dw_die_ref die)
 {
   dw_die_ref c;
 
-  if (dwarf_version < 4)
+  if (! use_debug_types)
     gcc_assert (die->die_mark);
 
   die->die_mark = 0;
@@ -11008,7 +11018,7 @@ value_format (dw_attr_ref a)
       return DW_FORM_flag;
     case dw_val_class_die_ref:
       if (AT_ref_external (a))
-       return dwarf_version >= 4 ? DW_FORM_ref_sig8 : DW_FORM_ref_addr;
+       return use_debug_types ? DW_FORM_ref_sig8 : DW_FORM_ref_addr;
       else
        return DW_FORM_ref;
     case dw_val_class_fde_ref:
@@ -11218,7 +11228,7 @@ output_die (dw_die_ref die)
 
   /* If someone in another CU might refer to us, set up a symbol for
      them to point to.  */
-  if (dwarf_version < 4 && die->die_id.die_symbol)
+  if (! use_debug_types && die->die_id.die_symbol)
     output_die_symbol (die);
 
   dw2_asm_output_data_uleb128 (die->die_abbrev, "(DIE (%#lx) %s)",
@@ -11357,7 +11367,7 @@ output_die (dw_die_ref die)
        case dw_val_class_die_ref:
          if (AT_ref_external (a))
            {
-             if (dwarf_version >= 4)
+             if (use_debug_types)
                {
                  comdat_type_node_ref type_node =
                    AT_ref (a)->die_id.die_type_node;
@@ -12898,7 +12908,7 @@ modified_type_die (tree type, int is_const_type, int is_volatile_type,
     }
   else if (code == REFERENCE_TYPE)
     {
-      if (TYPE_REF_IS_RVALUE (type) && dwarf_version >= 4)
+      if (TYPE_REF_IS_RVALUE (type) && use_debug_types)
        mod_type_die = new_die (DW_TAG_rvalue_reference_type, comp_unit_die (),
                                type);
       else
@@ -20139,7 +20149,7 @@ gen_reference_type_die (tree type, dw_die_ref context_die)
 {
   dw_die_ref ref_die, scope_die = scope_die_for (type, context_die);
 
-  if (TYPE_REF_IS_RVALUE (type) && dwarf_version >= 4)
+  if (TYPE_REF_IS_RVALUE (type) && use_debug_types)
     ref_die = new_die (DW_TAG_rvalue_reference_type, scope_die, type);
   else
     ref_die = new_die (DW_TAG_reference_type, scope_die, type);
@@ -22226,7 +22236,7 @@ dwarf2out_source_line (unsigned int line, const char *filename,
 static void
 dwarf2out_start_source_file (unsigned int lineno, const char *filename)
 {
-  if (flag_eliminate_dwarf2_dups && dwarf_version < 4)
+  if (flag_eliminate_dwarf2_dups && ! use_debug_types)
     {
       /* Record the beginning of the file for break_out_includes.  */
       dw_die_ref bincl_die;
@@ -22250,7 +22260,7 @@ dwarf2out_start_source_file (unsigned int lineno, const char *filename)
 static void
 dwarf2out_end_source_file (unsigned int lineno ATTRIBUTE_UNUSED)
 {
-  if (flag_eliminate_dwarf2_dups && dwarf_version < 4)
+  if (flag_eliminate_dwarf2_dups && ! use_debug_types)
     /* Record the end of the file for break_out_includes.  */
     new_die (DW_TAG_GNU_EINCL, comp_unit_die (), NULL);
 
@@ -22515,7 +22525,7 @@ prune_unused_types_walk_attribs (dw_die_ref die)
          /* A reference to another DIE.
             Make sure that it will get emitted.
             If it was broken out into a comdat group, don't follow it.  */
-          if (dwarf_version < 4
+          if (! use_debug_types
               || a->dw_attr == DW_AT_specification
               || a->dw_attr_val.v.val_die_ref.die->die_id.die_type_node == NULL)
            prune_unused_types_mark (a->dw_attr_val.v.val_die_ref.die, 1);
@@ -22596,7 +22606,7 @@ prune_unused_types_mark (dw_die_ref die, int dokids)
         breaking out types into comdat sections, do this
         for all type definitions.  */
       if (die->die_tag == DW_TAG_array_type
-          || (dwarf_version >= 4
+          || (use_debug_types
               && is_type_die (die) && ! is_declaration_die (die)))
        FOR_EACH_CHILD (die, c, prune_unused_types_mark (c, 1));
       else
@@ -23589,11 +23599,11 @@ dwarf2out_finish (const char *filename)
 
   /* Generate separate CUs for each of the include files we've seen.
      They will go into limbo_die_list.  */
-  if (flag_eliminate_dwarf2_dups && dwarf_version < 4)
+  if (flag_eliminate_dwarf2_dups && ! use_debug_types)
     break_out_includes (comp_unit_die ());
 
   /* Generate separate COMDAT sections for type DIEs. */
-  if (dwarf_version >= 4)
+  if (use_debug_types)
     {
       break_out_comdat_types (comp_unit_die ());