+2008-01-09 Luis Machado <luisgpm@br.ibm.com>
+
+ * printcmd.c (printf_command): Add seen_big_h, seen_big_d and
+ seen_double_big_d, treat the new H, D, and DD modifiers as length
+ modifiers.
+
2008-01-08 Joel Brobecker <brobecker@adacore.com>
* dwarf2read.c (read_enumeration_type): Add comment.
+2008-01-09 Luis Machado <luisgpm@br.ibm.com>
+
+ * gdb.texinfo (Output): Update documentation on using printf with DFP
+ types.
+
2008-01-07 Thiago Jung Bauermann <bauerman@br.ibm.com>
* gdb.texinfo (C and C++): Add Decimal Floating Point format
supported.
Additionally, @code{printf} supports conversion specifications for DFP
-(@dfn{Decimal Floating Point}) types using the following conversion
+(@dfn{Decimal Floating Point}) types using the following length modifiers
+together with a floating point specifier.
letters:
@itemize @bullet
@end itemize
If the underlying @code{C} implementation used to build @value{GDBN} has
-support for the three conversion letters for DFP types, other modifiers
+support for the three length modifiers for DFP types, other modifiers
such as width and precision will also be available for @value{GDBN} to use.
In case there is no such @code{C} support, no additional modifiers will be
Here's an example of printing DFP types using the above conversion letters:
@smallexample
-printf "D32: %H - D64: %D - D128: %DD\n",1.2345df,1.2E10dd,1.2E1dl
+printf "D32: %Hf - D64: %Df - D128: %DDf\n",1.2345df,1.2E10dd,1.2E1dl
@end smallexample
@end table
{
int seen_hash = 0, seen_zero = 0, lcount = 0, seen_prec = 0;
int seen_space = 0, seen_plus = 0;
- int seen_big_l = 0, seen_h = 0;
+ int seen_big_l = 0, seen_h = 0, seen_big_h = 0;
+ int seen_big_d = 0, seen_double_big_d = 0;
int bad = 0;
/* Check the validity of the format specifier, and work
seen_big_l = 1;
f++;
}
+ /* Decimal32 modifier. */
+ else if (*f == 'H')
+ {
+ seen_big_h = 1;
+ f++;
+ }
+ /* Decimal64 and Decimal128 modifiers. */
+ else if (*f == 'D')
+ {
+ f++;
+
+ /* Check for a Decimal128. */
+ if (*f == 'D')
+ {
+ f++;
+ seen_double_big_d = 1;
+ }
+ else
+ seen_big_d = 1;
+ }
switch (*f)
{
bad = 1;
break;
- /* DFP Decimal32 types. */
- case 'H':
- this_argclass = decfloat_arg;
-
-#ifndef PRINTF_HAS_DECFLOAT
- if (lcount || seen_h || seen_big_l)
- bad = 1;
- if (seen_prec || seen_zero || seen_space || seen_plus)
- bad = 1;
-#endif
- break;
-
- /* DFP Decimal64 and Decimal128 types. */
- case 'D':
- this_argclass = decfloat_arg;
-
-#ifndef PRINTF_HAS_DECFLOAT
- if (lcount || seen_h || seen_big_l)
- bad = 1;
- if (seen_prec || seen_zero || seen_space || seen_plus)
- bad = 1;
-#endif
- /* Check for a Decimal128. */
- if (*(f + 1) == 'D')
- f++;
-
- break;
-
case 'c':
this_argclass = int_arg;
if (lcount || seen_h || seen_big_l)
case 'g':
case 'E':
case 'G':
- if (seen_big_l)
+ if (seen_big_h || seen_big_d || seen_double_big_d)
+ this_argclass = decfloat_arg;
+ else if (seen_big_l)
this_argclass = long_double_arg;
else
this_argclass = double_arg;
break;
}
- /* Handles decimal floating point values. */
- case decfloat_arg:
+ /* Handles decimal floating values. */
+ case decfloat_arg:
{
- char *eos;
- char decstr[MAX_DECIMAL_STRING];
- unsigned int dfp_len = TYPE_LENGTH (value_type (val_args[i]));
- unsigned char *dfp_value_ptr = (unsigned char *) value_contents_all (val_args[i])
- + value_offset (val_args[i]);
-
+ const gdb_byte *param_ptr = value_contents (val_args[i]);
#if defined (PRINTF_HAS_DECFLOAT)
- printf_filtered (current_substring, dfp_value_ptr);
+ /* If we have native support for Decimal floating
+ printing, handle it here. */
+ printf_filtered (current_substring, param_ptr);
#else
- if (TYPE_CODE (value_type (val_args[i])) != TYPE_CODE_DECFLOAT)
- error (_("Cannot convert parameter to decfloat."));
/* As a workaround until vasprintf has native support for DFP
- we convert the DFP values to string and print them using
- the %s format specifier. */
- decimal_to_string (dfp_value_ptr, dfp_len, decstr);
+ we convert the DFP values to string and print them using
+ the %s format specifier. */
+
+ char *eos, *sos;
+ int nnull_chars = 0;
+
+ /* Parameter data. */
+ struct type *param_type = value_type (val_args[i]);
+ unsigned int param_len = TYPE_LENGTH (param_type);
+
+ /* DFP output data. */
+ struct value *dfp_value = NULL;
+ gdb_byte *dfp_ptr;
+ int dfp_len = 16;
+ gdb_byte dec[16];
+ struct type *dfp_type = NULL;
+ char decstr[MAX_DECIMAL_STRING];
/* Points to the end of the string so that we can go back
- and check for DFP format specifiers. */
+ and check for DFP length modifiers. */
eos = current_substring + strlen (current_substring);
- /* Replace %H, %D and %DD with %s's. */
- while (*--eos != '%')
- if (*eos == 'D' && *(eos - 1) == 'D')
- {
- *(eos - 1) = 's';
-
- /* If we've found a %DD format specifier we need to go
- through the whole string pulling back one character
- since this format specifier has two chars. */
- while (eos < last_arg)
- {
- *eos = *(eos + 1);
- eos++;
- }
- }
- else if (*eos == 'D' || *eos == 'H')
- *eos = 's';
+ /* Look for the float/double format specifier. */
+ while (*eos != 'f' && *eos != 'e' && *eos != 'E'
+ && *eos != 'g' && *eos != 'G')
+ eos--;
+
+ sos = eos;
+
+ /* Search for the '%' char and extract the size and type of
+ the output decimal value based on its modifiers
+ (%Hf, %Df, %DDf). */
+ while (*--sos != '%')
+ {
+ if (*sos == 'H')
+ {
+ dfp_len = 4;
+ dfp_type = builtin_type (current_gdbarch)->builtin_decfloat;
+ }
+ else if (*sos == 'D' && *(sos - 1) == 'D')
+ {
+ dfp_len = 16;
+ dfp_type = builtin_type (current_gdbarch)->builtin_declong;
+ sos--;
+ }
+ else
+ {
+ dfp_len = 8;
+ dfp_type = builtin_type (current_gdbarch)->builtin_decdouble;
+ }
+ }
+
+ /* Replace %Hf, %Df and %DDf with %s's. */
+ *++sos = 's';
+
+ /* Go through the whole format string and pull the correct
+ number of chars back to compensate for the change in the
+ format specifier. */
+ while (nnull_chars < nargs - i)
+ {
+ if (*eos == '\0')
+ nnull_chars++;
+
+ *++sos = *++eos;
+ }
+
+ /* Conversion between different DFP types. */
+ if (TYPE_CODE (param_type) == TYPE_CODE_DECFLOAT)
+ decimal_convert (param_ptr, param_len, dec, dfp_len);
+ else
+ /* If this is a non-trivial conversion, just output 0.
+ A correct converted value can be displayed by explicitly
+ casting to a DFP type. */
+ decimal_from_string (dec, dfp_len, "0");
+
+ dfp_value = value_from_decfloat (dfp_type, dec);
+
+ dfp_ptr = (gdb_byte *) value_contents (dfp_value);
+
+ decimal_to_string (dfp_ptr, dfp_len, decstr);
/* Print the DFP value. */
printf_filtered (current_substring, decstr);
+
break;
#endif
}
+2008-01-09 Luis Machado <luisgpm@br.ibm.com>
+
+ * gdb.base/printcmds.exp (test_printf_with_dfp): Update printf calls
+ with required float modifiers.
+
2008-01-08 Joel Brobecker <brobecker@adacore.com>
* gdb.ada/funcall_param: New test program.
# Test various dfp values, covering 32-bit, 64-bit and 128-bit ones
# _Decimal32 constants, which can support up to 7 digits
- gdb_test "printf \"%H\\n\",1.2df" "1.2"
- gdb_test "printf \"%H\\n\",-1.2df" "-1.2"
- gdb_test "printf \"%H\\n\",1.234567df" "1.234567"
- gdb_test "printf \"%H\\n\",-1.234567df" "-1.234567"
- gdb_test "printf \"%H\\n\",1234567.df" "1234567"
- gdb_test "printf \"%H\\n\",-1234567.df" "-1234567"
+ gdb_test "printf \"%Hf\\n\",1.2df" "1.2"
+ gdb_test "printf \"%Hf\\n\",-1.2df" "-1.2"
+ gdb_test "printf \"%Hf\\n\",1.234567df" "1.234567"
+ gdb_test "printf \"%Hf\\n\",-1.234567df" "-1.234567"
+ gdb_test "printf \"%Hf\\n\",1234567.df" "1234567"
+ gdb_test "printf \"%Hf\\n\",-1234567.df" "-1234567"
- gdb_test "printf \"%H\\n\",1.2E1df" "12"
- gdb_test "printf \"%H\\n\",1.2E10df" "1.2E\\+10"
- gdb_test "printf \"%H\\n\",1.2E-10df" "1.2E-10"
+ gdb_test "printf \"%Hf\\n\",1.2E1df" "12"
+ gdb_test "printf \"%Hf\\n\",1.2E10df" "1.2E\\+10"
+ gdb_test "printf \"%Hf\\n\",1.2E-10df" "1.2E-10"
# The largest exponent for 32-bit dfp value is 96.
- gdb_test "printf \"%H\\n\",1.2E96df" "1.200000E\\+96"
+ gdb_test "printf \"%Hf\\n\",1.2E96df" "1.200000E\\+96"
# _Decimal64 constants, which can support up to 16 digits
- gdb_test "printf \"%D\\n\",1.2dd" "1.2"
- gdb_test "printf \"%D\\n\",-1.2dd" "-1.2"
- gdb_test "printf \"%D\\n\",1.234567890123456dd" "1.234567890123456"
- gdb_test "printf \"%D\\n\",-1.234567890123456dd" "-1.234567890123456"
- gdb_test "printf \"%D\\n\",1234567890123456.dd" "1234567890123456"
- gdb_test "printf \"%D\\n\",-1234567890123456.dd" "-1234567890123456"
+ gdb_test "printf \"%Df\\n\",1.2dd" "1.2"
+ gdb_test "printf \"%Df\\n\",-1.2dd" "-1.2"
+ gdb_test "printf \"%Df\\n\",1.234567890123456dd" "1.234567890123456"
+ gdb_test "printf \"%Df\\n\",-1.234567890123456dd" "-1.234567890123456"
+ gdb_test "printf \"%Df\\n\",1234567890123456.dd" "1234567890123456"
+ gdb_test "printf \"%Df\\n\",-1234567890123456.dd" "-1234567890123456"
- gdb_test "printf \"%D\\n\",1.2E1dd" "12"
- gdb_test "printf \"%D\\n\",1.2E10dd" "1.2E\\+10"
- gdb_test "printf \"%D\\n\",1.2E-10dd" "1.2E-10"
+ gdb_test "printf \"%Df\\n\",1.2E1dd" "12"
+ gdb_test "printf \"%Df\\n\",1.2E10dd" "1.2E\\+10"
+ gdb_test "printf \"%Df\\n\",1.2E-10dd" "1.2E-10"
# The largest exponent for 64-bit dfp value is 384.
- gdb_test "printf \"%D\\n\",1.2E384dd" "1.200000000000000E\\+384"
+ gdb_test "printf \"%Df\\n\",1.2E384dd" "1.200000000000000E\\+384"
# _Decimal128 constants, which can support up to 34 digits
- gdb_test "printf \"%DD\\n\",1.2dl" "1.2"
- gdb_test "printf \"%DD\\n\",-1.2dl" "-1.2"
- gdb_test "printf \"%DD\\n\",1.234567890123456789012345678901234dl" "1.234567890123456789012345678901234"
- gdb_test "printf \"%DD\\n\",-1.234567890123456789012345678901234dl" "-1.234567890123456789012345678901234"
- gdb_test "printf \"%DD\\n\",1234567890123456789012345678901234.dl" "1234567890123456789012345678901234"
- gdb_test "printf \"%DD\\n\",-1234567890123456789012345678901234.dl" "-1234567890123456789012345678901234"
+ gdb_test "printf \"%DDf\\n\",1.2dl" "1.2"
+ gdb_test "printf \"%DDf\\n\",-1.2dl" "-1.2"
+ gdb_test "printf \"%DDf\\n\",1.234567890123456789012345678901234dl" "1.234567890123456789012345678901234"
+ gdb_test "printf \"%DDf\\n\",-1.234567890123456789012345678901234dl" "-1.234567890123456789012345678901234"
+ gdb_test "printf \"%DDf\\n\",1234567890123456789012345678901234.dl" "1234567890123456789012345678901234"
+ gdb_test "printf \"%DDf\\n\",-1234567890123456789012345678901234.dl" "-1234567890123456789012345678901234"
- gdb_test "printf \"%DD\\n\",1.2E1dl" "12"
- gdb_test "printf \"%DD\\n\",1.2E10dl" "1.2E\\+10"
- gdb_test "printf \"%DD\\n\",1.2E-10dl" "1.2E-10"
+ gdb_test "printf \"%DDf\\n\",1.2E1dl" "12"
+ gdb_test "printf \"%DDf\\n\",1.2E10dl" "1.2E\\+10"
+ gdb_test "printf \"%DDf\\n\",1.2E-10dl" "1.2E-10"
# The largest exponent for 128-bit dfp value is 6144.
- gdb_test "printf \"%DD\\n\",1.2E6144dl" "1.200000000000000000000000000000000E\\+6144"
+ gdb_test "printf \"%DDf\\n\",1.2E6144dl" "1.200000000000000000000000000000000E\\+6144"
}
# Escape a left curly brace to prevent it from being interpreted as
OSDN Git Service
