* configure.in: Clean up config-lang.in handling. Delete

	useless assignment to "subdirs".
	* configure: Regenerate.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@68588 138bc75d-0d04-0410-961f-82ee72b054a4

diff --git a/ChangeLog b/ChangeLog
index 9afdc9f..a00b87b 100644 (file)
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,9 @@
+2003-06-27  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+       * configure.in: Clean up config-lang.in handling.  Delete
+       useless assignment to "subdirs".
+       * configure: Regenerate.
+
 2003-06-26  Nathanael Nerode  <neroden@gcc.gnu.org>
 
        * configure.in: Rename 'target_libs' to 'target_libraries'.

diff --git a/configure b/configure
index 1d28c64..7f4c2f1 100755 (executable)
--- a/configure
+++ b/configure
@@ -1441,24 +1441,24 @@ enable_languages=`echo "${enable_languages}" | sed -e 's/[      ,][     ,]*/,/g' -e 's/
 # First scan to see if an enabled language requires some other language.
 # We assume that a given config-lang.in will list all the language
 # front ends it requires, even if some are required indirectly.
-for lang in ${srcdir}/gcc/*/config-lang.in ..
-do
-  case $lang in
+for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
+  case ${lang_frag} in
     ..) ;;
     # The odd quoting in the next line works around
     # an apparent bug in bash 1.12 on linux.
     ${srcdir}/gcc/[*]/config-lang.in) ;;
     *)
-      lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^      ]*\).*$,\1,p' $lang`
-      this_lang_requires=`sed -n -e 's,^lang_requires=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^lang_requires=\([^    ]*\).*$,\1,p' $lang`
-      for other in $this_lang_requires
-      do
+      # From the config-lang.in, get $language, $lang_requires
+      language=
+      lang_requires=
+      . ${lang_frag}
+      for other in ${lang_requires} ; do
         case ,${enable_languages}, in
          *,$other,*) ;;
          *,all,*) ;;
-         *,$lang_alias,*)
-           echo " \`$other' language required by \`$lang_alias'; enabling" 1>&2
-           enable_languages="$enable_languages,$other"
+         *,$language,*)
+           echo " \`$other' language required by \`$language'; enabling" 1>&2
+           enable_languages="${enable_languages},${other}"
            ;;
        esac
       done
@@ -1466,35 +1466,44 @@ do
   esac
 done
 
-subdirs=
-for lang in ${srcdir}/gcc/*/config-lang.in ..
-do
-  case $lang in
+for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
+  case ${lang_frag} in
     ..) ;;
     # The odd quoting in the next line works around
     # an apparent bug in bash 1.12 on linux.
     ${srcdir}/gcc/[*]/config-lang.in) ;;
     *)
-      lang_alias=`sed -n -e 's,^language=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^language=\([^      ]*\).*$,\1,p' $lang`
-      this_lang_libs=`sed -n -e 's,^target_libs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^target_libs=\([^    ]*\).*$,\1,p' $lang`
-      this_lang_dirs=`sed -n -e 's,^lang_dirs=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^lang_dirs=\([^        ]*\).*$,\1,p' $lang`
-      build_by_default=`sed -n -e 's,^build_by_default=['"'"'"'"]\(.*\)["'"'"'"'].*$,\1,p' -e 's,^build_by_default=\([^        ]*\).*$,\1,p' $lang`
-      if test "x$lang_alias" = x
-         then
-        echo "$lang doesn't set \$language." 1>&2
+      # From the config-lang.in, get $language, $target_libs, 
+      # $lang_dirs, and $build_by_default
+      language=
+      target_libs=
+      lang_dirs=
+      build_by_default=
+      . ${lang_frag}
+      if test "x$language" = x ; then
+        echo "${lang_frag} doesn't set \$language." 1>&2
         exit 1
       fi
-      case ${build_by_default},${enable_languages}, in
-        *,$lang_alias,*) add_this_lang=yes ;;
-        no,*) add_this_lang=no ;;
-        *,all,*) add_this_lang=yes ;;
+      case ,${enable_languages}, in
+        *,${language},*)
+          # Language was explicitly selected; include it.
+          add_this_lang=yes
+          ;;
+        *,all,*)
+          # 'all' was selected; include 'default' languages.
+          case ${build_by_default} in
+            no) add_this_lang=no ;;
+            *) add_this_lang=yes ;;
+          esac 
+          ;;
         *) add_this_lang=no ;;
       esac
-      if test x"${add_this_lang}" = xyes; then
-        :
-      else
-        eval noconfigdirs='"$noconfigdirs "'\"$this_lang_libs $this_lang_dirs\"
-      fi
+      case ${add_this_lang} in
+        no)
+          # Remove language-dependent dirs.
+          eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+          ;;
+      esac
       ;;
   esac
 done
@@ -2699,7 +2708,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
   # Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2703: checking for $ac_word" >&5
+echo "configure:2712: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2732,7 +2741,7 @@ if test -z "$ac_cv_prog_AR" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2736: checking for $ac_word" >&5
+echo "configure:2745: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2771,7 +2780,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2775: checking for $ac_word" >&5
+echo "configure:2784: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2804,7 +2813,7 @@ if test -z "$ac_cv_prog_AS" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2808: checking for $ac_word" >&5
+echo "configure:2817: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2843,7 +2852,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2847: checking for $ac_word" >&5
+echo "configure:2856: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2876,7 +2885,7 @@ if test -z "$ac_cv_prog_DLLTOOL" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2880: checking for $ac_word" >&5
+echo "configure:2889: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2915,7 +2924,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2919: checking for $ac_word" >&5
+echo "configure:2928: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2948,7 +2957,7 @@ if test -z "$ac_cv_prog_LD" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2952: checking for $ac_word" >&5
+echo "configure:2961: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2987,7 +2996,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2991: checking for $ac_word" >&5
+echo "configure:3000: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3020,7 +3029,7 @@ if test -z "$ac_cv_prog_NM" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3024: checking for $ac_word" >&5
+echo "configure:3033: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3059,7 +3068,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3063: checking for $ac_word" >&5
+echo "configure:3072: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3092,7 +3101,7 @@ if test -z "$ac_cv_prog_RANLIB" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3096: checking for $ac_word" >&5
+echo "configure:3105: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3131,7 +3140,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3135: checking for $ac_word" >&5
+echo "configure:3144: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3164,7 +3173,7 @@ if test -z "$ac_cv_prog_WINDRES" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3168: checking for $ac_word" >&5
+echo "configure:3177: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3203,7 +3212,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3207: checking for $ac_word" >&5
+echo "configure:3216: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3236,7 +3245,7 @@ if test -z "$ac_cv_prog_OBJCOPY" ; then
     # Extract the first word of "objcopy", so it can be a program name with args.
 set dummy objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3240: checking for $ac_word" >&5
+echo "configure:3249: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3275,7 +3284,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3279: checking for $ac_word" >&5
+echo "configure:3288: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3308,7 +3317,7 @@ if test -z "$ac_cv_prog_OBJDUMP" ; then
     # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3312: checking for $ac_word" >&5
+echo "configure:3321: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3356,7 +3365,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3360: checking for $ac_word" >&5
+echo "configure:3369: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3389,7 +3398,7 @@ if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3393: checking for $ac_word" >&5
+echo "configure:3402: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3428,7 +3437,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3432: checking for $ac_word" >&5
+echo "configure:3441: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3461,7 +3470,7 @@ if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3465: checking for $ac_word" >&5
+echo "configure:3474: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3500,7 +3509,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3504: checking for $ac_word" >&5
+echo "configure:3513: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3533,7 +3542,7 @@ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3537: checking for $ac_word" >&5
+echo "configure:3546: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3572,7 +3581,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3576: checking for $ac_word" >&5
+echo "configure:3585: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3605,7 +3614,7 @@ if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3609: checking for $ac_word" >&5
+echo "configure:3618: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3644,7 +3653,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3648: checking for $ac_word" >&5
+echo "configure:3657: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3677,7 +3686,7 @@ if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3681: checking for $ac_word" >&5
+echo "configure:3690: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3716,7 +3725,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3720: checking for $ac_word" >&5
+echo "configure:3729: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3749,7 +3758,7 @@ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3753: checking for $ac_word" >&5
+echo "configure:3762: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3788,7 +3797,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3792: checking for $ac_word" >&5
+echo "configure:3801: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3821,7 +3830,7 @@ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3825: checking for $ac_word" >&5
+echo "configure:3834: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3888,7 +3897,7 @@ RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
 NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:3892: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:3901: checking whether to enable maintainer-specific portions of Makefiles" >&5
 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"

diff --git a/configure.in b/configure.in
index 463db7a..1ace2dc 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -755,24 +755,24 @@ enable_languages=`echo "${enable_languages}" | sed -e 's/[[       ,]][[   ,]]*/,/g' -e
 # First scan to see if an enabled language requires some other language.
 # We assume that a given config-lang.in will list all the language
 # front ends it requires, even if some are required indirectly.
-for lang in ${srcdir}/gcc/*/config-lang.in ..
-do
-  case $lang in
+for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
+  case ${lang_frag} in
     ..) ;;
     # The odd quoting in the next line works around
     # an apparent bug in bash 1.12 on linux.
     ${srcdir}/gcc/[[*]]/config-lang.in) ;;
     *)
-      lang_alias=`sed -n -e 's,^language=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^language=\([[^         ]]*\).*$,\1,p' $lang`
-      this_lang_requires=`sed -n -e 's,^lang_requires=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^lang_requires=\([[^       ]]*\).*$,\1,p' $lang`
-      for other in $this_lang_requires
-      do
+      # From the config-lang.in, get $language, $lang_requires
+      language=
+      lang_requires=
+      . ${lang_frag}
+      for other in ${lang_requires} ; do
         case ,${enable_languages}, in
          *,$other,*) ;;
          *,all,*) ;;
-         *,$lang_alias,*)
-           echo " \`$other' language required by \`$lang_alias'; enabling" 1>&2
-           enable_languages="$enable_languages,$other"
+         *,$language,*)
+           echo " \`$other' language required by \`$language'; enabling" 1>&2
+           enable_languages="${enable_languages},${other}"
            ;;
        esac
       done
@@ -780,35 +780,44 @@ do
   esac
 done
 
-subdirs=
-for lang in ${srcdir}/gcc/*/config-lang.in ..
-do
-  case $lang in
+for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
+  case ${lang_frag} in
     ..) ;;
     # The odd quoting in the next line works around
     # an apparent bug in bash 1.12 on linux.
     ${srcdir}/gcc/[[*]]/config-lang.in) ;;
     *)
-      lang_alias=`sed -n -e 's,^language=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^language=\([[^         ]]*\).*$,\1,p' $lang`
-      this_lang_libs=`sed -n -e 's,^target_libs=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^target_libs=\([[^       ]]*\).*$,\1,p' $lang`
-      this_lang_dirs=`sed -n -e 's,^lang_dirs=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^lang_dirs=\([[^   ]]*\).*$,\1,p' $lang`
-      build_by_default=`sed -n -e 's,^build_by_default=[['"'"'"'"]]\(.*\)[["'"'"'"']].*$,\1,p' -e 's,^build_by_default=\([[^   ]]*\).*$,\1,p' $lang`
-      if test "x$lang_alias" = x
-         then
-        echo "$lang doesn't set \$language." 1>&2
+      # From the config-lang.in, get $language, $target_libs, 
+      # $lang_dirs, and $build_by_default
+      language=
+      target_libs=
+      lang_dirs=
+      build_by_default=
+      . ${lang_frag}
+      if test "x$language" = x ; then
+        echo "${lang_frag} doesn't set \$language." 1>&2
         exit 1
       fi
-      case ${build_by_default},${enable_languages}, in
-        *,$lang_alias,*) add_this_lang=yes ;;
-        no,*) add_this_lang=no ;;
-        *,all,*) add_this_lang=yes ;;
+      case ,${enable_languages}, in
+        *,${language},*)
+          # Language was explicitly selected; include it.
+          add_this_lang=yes
+          ;;
+        *,all,*)
+          # 'all' was selected; include 'default' languages.
+          case ${build_by_default} in
+            no) add_this_lang=no ;;
+            *) add_this_lang=yes ;;
+          esac 
+          ;;
         *) add_this_lang=no ;;
       esac
-      if test x"${add_this_lang}" = xyes; then
-        :
-      else
-        eval noconfigdirs='"$noconfigdirs "'\"$this_lang_libs $this_lang_dirs\"
-      fi
+      case ${add_this_lang} in
+        no)
+          # Remove language-dependent dirs.
+          eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+          ;;
+      esac
       ;;
   esac
 done