* Makefile.tpl: Use 'mkinstalldirs' rather than 'mkdir' when

	creating target and build subdirs to build all parent dirs as needed.
	* Makefile.in: Rebuild.
	* configure.in: Don't build dirs explicitly here.
	* configure: Rebuild.

diff --git a/ChangeLog b/ChangeLog
index 7cd8555..fc46991 100644 (file)
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,11 @@
+2003-07-27  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+       * Makefile.tpl: Use 'mkinstalldirs' rather than 'mkdir' when
+       creating target and build subdirs to build all parent dirs as needed.
+       * Makefile.in: Rebuild.
+       * configure.in: Don't build dirs explicitly here.
+       * configure: Rebuild.
+
 2003-07-22  Alexandre Oliva  <aoliva@redhat.com>
 
        * Makefile.tpl (all-make): Depend on intl.

diff --git a/Makefile.in b/Makefile.in
index 81cc0d6..5784fc6 100644 (file)
--- a/Makefile.in
+++ b/Makefile.in
@@ -17610,8 +17610,7 @@ TAGS: do-TAGS
 maybe-configure-build-fixincludes:
 configure-build-fixincludes:
        @test ! -f $(BUILD_SUBDIR)/fixincludes/Makefile || exit 0; \
-       [ -d $(BUILD_SUBDIR)/fixincludes ] || \
-         mkdir $(BUILD_SUBDIR)/fixincludes;\
+       $(SHELL) $(srcdir)/mkinstalldirs $(BUILD_SUBDIR)/fixincludes ; \
        r=`${PWD_COMMAND}`; export r; \
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
        AR="$(AR_FOR_BUILD)"; export AR; \
@@ -17679,8 +17678,7 @@ all-build-fixincludes: configure-build-fixincludes
 maybe-configure-build-libiberty:
 configure-build-libiberty:
        @test ! -f $(BUILD_SUBDIR)/libiberty/Makefile || exit 0; \
-       [ -d $(BUILD_SUBDIR)/libiberty ] || \
-         mkdir $(BUILD_SUBDIR)/libiberty;\
+       $(SHELL) $(srcdir)/mkinstalldirs $(BUILD_SUBDIR)/libiberty ; \
        r=`${PWD_COMMAND}`; export r; \
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
        AR="$(AR_FOR_BUILD)"; export AR; \
@@ -21962,15 +21960,13 @@ maybe-configure-target-libstdc++-v3:
 
 # There's only one multilib.out.  Cleverer subdirs shouldn't need it copied.
 $(TARGET_SUBDIR)/libstdc++-v3/multilib.out: multilib.out
-       @[ -d $(TARGET_SUBDIR)/libstdc++-v3 ] || \
-         mkdir $(TARGET_SUBDIR)/libstdc++-v3; \
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libstdc++-v3 ; \
        rm -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile || : ; \
        cp multilib.out $(TARGET_SUBDIR)/libstdc++-v3/multilib.out
 
 configure-target-libstdc++-v3: $(TARGET_SUBDIR)/libstdc++-v3/multilib.out
        @test ! -f $(TARGET_SUBDIR)/libstdc++-v3/Makefile || exit 0; \
-       [ -d $(TARGET_SUBDIR)/libstdc++-v3 ] || \
-         mkdir $(TARGET_SUBDIR)/libstdc++-v3;\
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libstdc++-v3 ; \
        r=`${PWD_COMMAND}`; export r; \
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
        $(SET_LIB_PATH) \
@@ -22066,15 +22062,13 @@ maybe-configure-target-newlib:
 
 # There's only one multilib.out.  Cleverer subdirs shouldn't need it copied.
 $(TARGET_SUBDIR)/newlib/multilib.out: multilib.out
-       @[ -d $(TARGET_SUBDIR)/newlib ] || \
-         mkdir $(TARGET_SUBDIR)/newlib; \
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/newlib ; \
        rm -f $(TARGET_SUBDIR)/newlib/Makefile || : ; \
        cp multilib.out $(TARGET_SUBDIR)/newlib/multilib.out
 
 configure-target-newlib: $(TARGET_SUBDIR)/newlib/multilib.out
        @test ! -f $(TARGET_SUBDIR)/newlib/Makefile || exit 0; \
-       [ -d $(TARGET_SUBDIR)/newlib ] || \
-         mkdir $(TARGET_SUBDIR)/newlib;\
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/newlib ; \
        r=`${PWD_COMMAND}`; export r; \
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
        $(SET_LIB_PATH) \
@@ -22169,15 +22163,13 @@ maybe-configure-target-libf2c:
 
 # There's only one multilib.out.  Cleverer subdirs shouldn't need it copied.
 $(TARGET_SUBDIR)/libf2c/multilib.out: multilib.out
-       @[ -d $(TARGET_SUBDIR)/libf2c ] || \
-         mkdir $(TARGET_SUBDIR)/libf2c; \
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libf2c ; \
        rm -f $(TARGET_SUBDIR)/libf2c/Makefile || : ; \
        cp multilib.out $(TARGET_SUBDIR)/libf2c/multilib.out
 
 configure-target-libf2c: $(TARGET_SUBDIR)/libf2c/multilib.out
        @test ! -f $(TARGET_SUBDIR)/libf2c/Makefile || exit 0; \
-       [ -d $(TARGET_SUBDIR)/libf2c ] || \
-         mkdir $(TARGET_SUBDIR)/libf2c;\
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libf2c ; \
        r=`${PWD_COMMAND}`; export r; \
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
        $(SET_LIB_PATH) \
@@ -22272,15 +22264,13 @@ maybe-configure-target-libobjc:
 
 # There's only one multilib.out.  Cleverer subdirs shouldn't need it copied.
 $(TARGET_SUBDIR)/libobjc/multilib.out: multilib.out
-       @[ -d $(TARGET_SUBDIR)/libobjc ] || \
-         mkdir $(TARGET_SUBDIR)/libobjc; \
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libobjc ; \
        rm -f $(TARGET_SUBDIR)/libobjc/Makefile || : ; \
        cp multilib.out $(TARGET_SUBDIR)/libobjc/multilib.out
 
 configure-target-libobjc: $(TARGET_SUBDIR)/libobjc/multilib.out
        @test ! -f $(TARGET_SUBDIR)/libobjc/Makefile || exit 0; \
-       [ -d $(TARGET_SUBDIR)/libobjc ] || \
-         mkdir $(TARGET_SUBDIR)/libobjc;\
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libobjc ; \
        r=`${PWD_COMMAND}`; export r; \
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
        $(SET_LIB_PATH) \
@@ -22375,15 +22365,13 @@ maybe-configure-target-libtermcap:
 
 # There's only one multilib.out.  Cleverer subdirs shouldn't need it copied.
 $(TARGET_SUBDIR)/libtermcap/multilib.out: multilib.out
-       @[ -d $(TARGET_SUBDIR)/libtermcap ] || \
-         mkdir $(TARGET_SUBDIR)/libtermcap; \
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libtermcap ; \
        rm -f $(TARGET_SUBDIR)/libtermcap/Makefile || : ; \
        cp multilib.out $(TARGET_SUBDIR)/libtermcap/multilib.out
 
 configure-target-libtermcap: $(TARGET_SUBDIR)/libtermcap/multilib.out
        @test ! -f $(TARGET_SUBDIR)/libtermcap/Makefile || exit 0; \
-       [ -d $(TARGET_SUBDIR)/libtermcap ] || \
-         mkdir $(TARGET_SUBDIR)/libtermcap;\
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libtermcap ; \
        r=`${PWD_COMMAND}`; export r; \
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
        $(SET_LIB_PATH) \
@@ -22474,15 +22462,13 @@ maybe-configure-target-winsup:
 
 # There's only one multilib.out.  Cleverer subdirs shouldn't need it copied.
 $(TARGET_SUBDIR)/winsup/multilib.out: multilib.out
-       @[ -d $(TARGET_SUBDIR)/winsup ] || \
-         mkdir $(TARGET_SUBDIR)/winsup; \
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/winsup ; \
        rm -f $(TARGET_SUBDIR)/winsup/Makefile || : ; \
        cp multilib.out $(TARGET_SUBDIR)/winsup/multilib.out
 
 configure-target-winsup: $(TARGET_SUBDIR)/winsup/multilib.out
        @test ! -f $(TARGET_SUBDIR)/winsup/Makefile || exit 0; \
-       [ -d $(TARGET_SUBDIR)/winsup ] || \
-         mkdir $(TARGET_SUBDIR)/winsup;\
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/winsup ; \
        r=`${PWD_COMMAND}`; export r; \
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
        $(SET_LIB_PATH) \
@@ -22577,15 +22563,13 @@ maybe-configure-target-libgloss:
 
 # There's only one multilib.out.  Cleverer subdirs shouldn't need it copied.
 $(TARGET_SUBDIR)/libgloss/multilib.out: multilib.out
-       @[ -d $(TARGET_SUBDIR)/libgloss ] || \
-         mkdir $(TARGET_SUBDIR)/libgloss; \
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libgloss ; \
        rm -f $(TARGET_SUBDIR)/libgloss/Makefile || : ; \
        cp multilib.out $(TARGET_SUBDIR)/libgloss/multilib.out
 
 configure-target-libgloss: $(TARGET_SUBDIR)/libgloss/multilib.out
        @test ! -f $(TARGET_SUBDIR)/libgloss/Makefile || exit 0; \
-       [ -d $(TARGET_SUBDIR)/libgloss ] || \
-         mkdir $(TARGET_SUBDIR)/libgloss;\
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libgloss ; \
        r=`${PWD_COMMAND}`; export r; \
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
        $(SET_LIB_PATH) \
@@ -22676,15 +22660,13 @@ maybe-configure-target-libiberty:
 
 # There's only one multilib.out.  Cleverer subdirs shouldn't need it copied.
 $(TARGET_SUBDIR)/libiberty/multilib.out: multilib.out
-       @[ -d $(TARGET_SUBDIR)/libiberty ] || \
-         mkdir $(TARGET_SUBDIR)/libiberty; \
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libiberty ; \
        rm -f $(TARGET_SUBDIR)/libiberty/Makefile || : ; \
        cp multilib.out $(TARGET_SUBDIR)/libiberty/multilib.out
 
 configure-target-libiberty: $(TARGET_SUBDIR)/libiberty/multilib.out
        @test ! -f $(TARGET_SUBDIR)/libiberty/Makefile || exit 0; \
-       [ -d $(TARGET_SUBDIR)/libiberty ] || \
-         mkdir $(TARGET_SUBDIR)/libiberty;\
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libiberty ; \
        r=`${PWD_COMMAND}`; export r; \
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
        $(SET_LIB_PATH) \
@@ -22779,15 +22761,13 @@ maybe-configure-target-gperf:
 
 # There's only one multilib.out.  Cleverer subdirs shouldn't need it copied.
 $(TARGET_SUBDIR)/gperf/multilib.out: multilib.out
-       @[ -d $(TARGET_SUBDIR)/gperf ] || \
-         mkdir $(TARGET_SUBDIR)/gperf; \
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/gperf ; \
        rm -f $(TARGET_SUBDIR)/gperf/Makefile || : ; \
        cp multilib.out $(TARGET_SUBDIR)/gperf/multilib.out
 
 configure-target-gperf: $(TARGET_SUBDIR)/gperf/multilib.out
        @test ! -f $(TARGET_SUBDIR)/gperf/Makefile || exit 0; \
-       [ -d $(TARGET_SUBDIR)/gperf ] || \
-         mkdir $(TARGET_SUBDIR)/gperf;\
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/gperf ; \
        r=`${PWD_COMMAND}`; export r; \
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
        $(SET_LIB_PATH) \
@@ -22882,15 +22862,13 @@ maybe-configure-target-examples:
 
 # There's only one multilib.out.  Cleverer subdirs shouldn't need it copied.
 $(TARGET_SUBDIR)/examples/multilib.out: multilib.out
-       @[ -d $(TARGET_SUBDIR)/examples ] || \
-         mkdir $(TARGET_SUBDIR)/examples; \
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/examples ; \
        rm -f $(TARGET_SUBDIR)/examples/Makefile || : ; \
        cp multilib.out $(TARGET_SUBDIR)/examples/multilib.out
 
 configure-target-examples: $(TARGET_SUBDIR)/examples/multilib.out
        @test ! -f $(TARGET_SUBDIR)/examples/Makefile || exit 0; \
-       [ -d $(TARGET_SUBDIR)/examples ] || \
-         mkdir $(TARGET_SUBDIR)/examples;\
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/examples ; \
        r=`${PWD_COMMAND}`; export r; \
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
        $(SET_LIB_PATH) \
@@ -22977,15 +22955,13 @@ maybe-configure-target-libffi:
 
 # There's only one multilib.out.  Cleverer subdirs shouldn't need it copied.
 $(TARGET_SUBDIR)/libffi/multilib.out: multilib.out
-       @[ -d $(TARGET_SUBDIR)/libffi ] || \
-         mkdir $(TARGET_SUBDIR)/libffi; \
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libffi ; \
        rm -f $(TARGET_SUBDIR)/libffi/Makefile || : ; \
        cp multilib.out $(TARGET_SUBDIR)/libffi/multilib.out
 
 configure-target-libffi: $(TARGET_SUBDIR)/libffi/multilib.out
        @test ! -f $(TARGET_SUBDIR)/libffi/Makefile || exit 0; \
-       [ -d $(TARGET_SUBDIR)/libffi ] || \
-         mkdir $(TARGET_SUBDIR)/libffi;\
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libffi ; \
        r=`${PWD_COMMAND}`; export r; \
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
        $(SET_LIB_PATH) \
@@ -23080,15 +23056,13 @@ maybe-configure-target-libjava:
 
 # There's only one multilib.out.  Cleverer subdirs shouldn't need it copied.
 $(TARGET_SUBDIR)/libjava/multilib.out: multilib.out
-       @[ -d $(TARGET_SUBDIR)/libjava ] || \
-         mkdir $(TARGET_SUBDIR)/libjava; \
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libjava ; \
        rm -f $(TARGET_SUBDIR)/libjava/Makefile || : ; \
        cp multilib.out $(TARGET_SUBDIR)/libjava/multilib.out
 
 configure-target-libjava: $(TARGET_SUBDIR)/libjava/multilib.out
        @test ! -f $(TARGET_SUBDIR)/libjava/Makefile || exit 0; \
-       [ -d $(TARGET_SUBDIR)/libjava ] || \
-         mkdir $(TARGET_SUBDIR)/libjava;\
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/libjava ; \
        r=`${PWD_COMMAND}`; export r; \
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
        $(SET_LIB_PATH) \
@@ -23184,15 +23158,13 @@ maybe-configure-target-zlib:
 
 # There's only one multilib.out.  Cleverer subdirs shouldn't need it copied.
 $(TARGET_SUBDIR)/zlib/multilib.out: multilib.out
-       @[ -d $(TARGET_SUBDIR)/zlib ] || \
-         mkdir $(TARGET_SUBDIR)/zlib; \
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/zlib ; \
        rm -f $(TARGET_SUBDIR)/zlib/Makefile || : ; \
        cp multilib.out $(TARGET_SUBDIR)/zlib/multilib.out
 
 configure-target-zlib: $(TARGET_SUBDIR)/zlib/multilib.out
        @test ! -f $(TARGET_SUBDIR)/zlib/Makefile || exit 0; \
-       [ -d $(TARGET_SUBDIR)/zlib ] || \
-         mkdir $(TARGET_SUBDIR)/zlib;\
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/zlib ; \
        r=`${PWD_COMMAND}`; export r; \
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
        $(SET_LIB_PATH) \
@@ -23287,15 +23259,13 @@ maybe-configure-target-boehm-gc:
 
 # There's only one multilib.out.  Cleverer subdirs shouldn't need it copied.
 $(TARGET_SUBDIR)/boehm-gc/multilib.out: multilib.out
-       @[ -d $(TARGET_SUBDIR)/boehm-gc ] || \
-         mkdir $(TARGET_SUBDIR)/boehm-gc; \
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/boehm-gc ; \
        rm -f $(TARGET_SUBDIR)/boehm-gc/Makefile || : ; \
        cp multilib.out $(TARGET_SUBDIR)/boehm-gc/multilib.out
 
 configure-target-boehm-gc: $(TARGET_SUBDIR)/boehm-gc/multilib.out
        @test ! -f $(TARGET_SUBDIR)/boehm-gc/Makefile || exit 0; \
-       [ -d $(TARGET_SUBDIR)/boehm-gc ] || \
-         mkdir $(TARGET_SUBDIR)/boehm-gc;\
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/boehm-gc ; \
        r=`${PWD_COMMAND}`; export r; \
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
        $(SET_LIB_PATH) \
@@ -23390,15 +23360,13 @@ maybe-configure-target-qthreads:
 
 # There's only one multilib.out.  Cleverer subdirs shouldn't need it copied.
 $(TARGET_SUBDIR)/qthreads/multilib.out: multilib.out
-       @[ -d $(TARGET_SUBDIR)/qthreads ] || \
-         mkdir $(TARGET_SUBDIR)/qthreads; \
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/qthreads ; \
        rm -f $(TARGET_SUBDIR)/qthreads/Makefile || : ; \
        cp multilib.out $(TARGET_SUBDIR)/qthreads/multilib.out
 
 configure-target-qthreads: $(TARGET_SUBDIR)/qthreads/multilib.out
        @test ! -f $(TARGET_SUBDIR)/qthreads/Makefile || exit 0; \
-       [ -d $(TARGET_SUBDIR)/qthreads ] || \
-         mkdir $(TARGET_SUBDIR)/qthreads;\
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/qthreads ; \
        r=`${PWD_COMMAND}`; export r; \
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
        $(SET_LIB_PATH) \
@@ -23493,15 +23461,13 @@ maybe-configure-target-rda:
 
 # There's only one multilib.out.  Cleverer subdirs shouldn't need it copied.
 $(TARGET_SUBDIR)/rda/multilib.out: multilib.out
-       @[ -d $(TARGET_SUBDIR)/rda ] || \
-         mkdir $(TARGET_SUBDIR)/rda; \
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/rda ; \
        rm -f $(TARGET_SUBDIR)/rda/Makefile || : ; \
        cp multilib.out $(TARGET_SUBDIR)/rda/multilib.out
 
 configure-target-rda: $(TARGET_SUBDIR)/rda/multilib.out
        @test ! -f $(TARGET_SUBDIR)/rda/Makefile || exit 0; \
-       [ -d $(TARGET_SUBDIR)/rda ] || \
-         mkdir $(TARGET_SUBDIR)/rda;\
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/rda ; \
        r=`${PWD_COMMAND}`; export r; \
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
        $(SET_LIB_PATH) \

diff --git a/Makefile.tpl b/Makefile.tpl
index 120fbc4..c7e23b2 100644 (file)
--- a/Makefile.tpl
+++ b/Makefile.tpl
@@ -779,8 +779,7 @@ TAGS: do-TAGS
 maybe-configure-build-[+module+]:
 configure-build-[+module+]:
        @test ! -f $(BUILD_SUBDIR)/[+module+]/Makefile || exit 0; \
-       [ -d $(BUILD_SUBDIR)/[+module+] ] || \
-         mkdir $(BUILD_SUBDIR)/[+module+];\
+       $(SHELL) $(srcdir)/mkinstalldirs $(BUILD_SUBDIR)/[+module+] ; \
        r=`${PWD_COMMAND}`; export r; \
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
        AR="$(AR_FOR_BUILD)"; export AR; \
@@ -950,15 +949,13 @@ maybe-configure-target-[+module+]:
 
 # There's only one multilib.out.  Cleverer subdirs shouldn't need it copied.
 $(TARGET_SUBDIR)/[+module+]/multilib.out: multilib.out
-       @[ -d $(TARGET_SUBDIR)/[+module+] ] || \
-         mkdir $(TARGET_SUBDIR)/[+module+]; \
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/[+module+] ; \
        rm -f $(TARGET_SUBDIR)/[+module+]/Makefile || : ; \
        cp multilib.out $(TARGET_SUBDIR)/[+module+]/multilib.out
 
 configure-target-[+module+]: $(TARGET_SUBDIR)/[+module+]/multilib.out
        @test ! -f $(TARGET_SUBDIR)/[+module+]/Makefile || exit 0; \
-       [ -d $(TARGET_SUBDIR)/[+module+] ] || \
-         mkdir $(TARGET_SUBDIR)/[+module+];\
+       $(SHELL) $(srcdir)/mkinstalldirs $(TARGET_SUBDIR)/[+module+] ; \
        r=`${PWD_COMMAND}`; export r; \
        s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \
        $(SET_LIB_PATH) \

diff --git a/configure b/configure
index f3f42bd..3dee423 100755 (executable)
--- a/configure
+++ b/configure
@@ -920,7 +920,7 @@ else
   is_cross_compiler=yes
 fi     
 
-# Find the build and target subdirs.
+# Find the build and target subdir names.
  case ${build_alias} in
   "") build_noncanonical=${build} ;;
   *) build_noncanonical=${build_alias} ;;
@@ -944,24 +944,6 @@ host_subdir=.
 target_subdir=${target_noncanonical}
    
 
-if test ! -d ${target_subdir} ; then
-  if mkdir ${target_subdir} ; then true
-  else
-    echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${target_subdir}" 1>&2
-    exit 1
-  fi
-fi
-
-if test x"${build_alias}" != x"${host}" ; then
-  if test ! -d ${build_subdir} ; then
-    if mkdir ${build_subdir} ; then true
-    else
-      echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${build_subdir}" 1>&2
-      exit 1
-    fi
-  fi
-fi
-
 # Skipdirs are removed silently.
 skipdirs=
 # Noconfigdirs are removed loudly.
@@ -2780,7 +2762,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias-
   # Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2784: checking for $ac_word" >&5
+echo "configure:2766: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2813,7 +2795,7 @@ if test -z "$ac_cv_prog_AR" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2817: checking for $ac_word" >&5
+echo "configure:2799: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2852,7 +2834,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2856: checking for $ac_word" >&5
+echo "configure:2838: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2885,7 +2867,7 @@ if test -z "$ac_cv_prog_AS" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2889: checking for $ac_word" >&5
+echo "configure:2871: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2924,7 +2906,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2928: checking for $ac_word" >&5
+echo "configure:2910: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2957,7 +2939,7 @@ if test -z "$ac_cv_prog_DLLTOOL" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2961: checking for $ac_word" >&5
+echo "configure:2943: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2996,7 +2978,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3000: checking for $ac_word" >&5
+echo "configure:2982: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3029,7 +3011,7 @@ if test -z "$ac_cv_prog_LD" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3033: checking for $ac_word" >&5
+echo "configure:3015: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3068,7 +3050,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3072: checking for $ac_word" >&5
+echo "configure:3054: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3101,7 +3083,7 @@ if test -z "$ac_cv_prog_NM" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3105: checking for $ac_word" >&5
+echo "configure:3087: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3140,7 +3122,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3144: checking for $ac_word" >&5
+echo "configure:3126: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3173,7 +3155,7 @@ if test -z "$ac_cv_prog_RANLIB" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3177: checking for $ac_word" >&5
+echo "configure:3159: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3212,7 +3194,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3216: checking for $ac_word" >&5
+echo "configure:3198: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3245,7 +3227,7 @@ if test -z "$ac_cv_prog_WINDRES" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3249: checking for $ac_word" >&5
+echo "configure:3231: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3284,7 +3266,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3288: checking for $ac_word" >&5
+echo "configure:3270: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3317,7 +3299,7 @@ if test -z "$ac_cv_prog_OBJCOPY" ; then
     # Extract the first word of "objcopy", so it can be a program name with args.
 set dummy objcopy; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3321: checking for $ac_word" >&5
+echo "configure:3303: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3356,7 +3338,7 @@ fi
   # Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args.
 set dummy ${ncn_tool_prefix}objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3360: checking for $ac_word" >&5
+echo "configure:3342: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3389,7 +3371,7 @@ if test -z "$ac_cv_prog_OBJDUMP" ; then
     # Extract the first word of "objdump", so it can be a program name with args.
 set dummy objdump; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3393: checking for $ac_word" >&5
+echo "configure:3375: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3437,7 +3419,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3441: checking for $ac_word" >&5
+echo "configure:3423: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3470,7 +3452,7 @@ if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then
     # Extract the first word of "ar", so it can be a program name with args.
 set dummy ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3474: checking for $ac_word" >&5
+echo "configure:3456: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3509,7 +3491,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3513: checking for $ac_word" >&5
+echo "configure:3495: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3542,7 +3524,7 @@ if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then
     # Extract the first word of "as", so it can be a program name with args.
 set dummy as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3546: checking for $ac_word" >&5
+echo "configure:3528: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3581,7 +3563,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3585: checking for $ac_word" >&5
+echo "configure:3567: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3614,7 +3596,7 @@ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then
     # Extract the first word of "dlltool", so it can be a program name with args.
 set dummy dlltool; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3618: checking for $ac_word" >&5
+echo "configure:3600: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3653,7 +3635,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3657: checking for $ac_word" >&5
+echo "configure:3639: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3686,7 +3668,7 @@ if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then
     # Extract the first word of "ld", so it can be a program name with args.
 set dummy ld; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3690: checking for $ac_word" >&5
+echo "configure:3672: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3725,7 +3707,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3729: checking for $ac_word" >&5
+echo "configure:3711: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3758,7 +3740,7 @@ if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then
     # Extract the first word of "nm", so it can be a program name with args.
 set dummy nm; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3762: checking for $ac_word" >&5
+echo "configure:3744: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3797,7 +3779,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3801: checking for $ac_word" >&5
+echo "configure:3783: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3830,7 +3812,7 @@ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then
     # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3834: checking for $ac_word" >&5
+echo "configure:3816: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3869,7 +3851,7 @@ fi
   # Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args.
 set dummy ${ncn_target_tool_prefix}windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3873: checking for $ac_word" >&5
+echo "configure:3855: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3902,7 +3884,7 @@ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then
     # Extract the first word of "windres", so it can be a program name with args.
 set dummy windres; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:3906: checking for $ac_word" >&5
+echo "configure:3888: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3969,7 +3951,7 @@ RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
 NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target}
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:3973: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:3955: checking whether to enable maintainer-specific portions of Makefiles" >&5
 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"

diff --git a/configure.in b/configure.in
index 6c22add..a478156 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -192,27 +192,9 @@ else
   is_cross_compiler=yes
 fi     
 
-# Find the build and target subdirs.
+# Find the build and target subdir names.
 GCC_TOPLEV_SUBDIRS
 
-if test ! -d ${target_subdir} ; then
-  if mkdir ${target_subdir} ; then true
-  else
-    echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${target_subdir}" 1>&2
-    exit 1
-  fi
-fi
-
-if test x"${build_alias}" != x"${host}" ; then
-  if test ! -d ${build_subdir} ; then
-    if mkdir ${build_subdir} ; then true
-    else
-      echo "'*** could not make ${PWD=`${PWDCMD-pwd}`}/${build_subdir}" 1>&2
-      exit 1
-    fi
-  fi
-fi
-
 # Skipdirs are removed silently.
 skipdirs=
 # Noconfigdirs are removed loudly.