OSDN Git Service

* config/rs6000/aix53.h: New file.
authordje <dje@138bc75d-0d04-0410-961f-82ee72b054a4>
Sat, 13 Oct 2007 21:40:11 +0000 (21:40 +0000)
committerdje <dje@138bc75d-0d04-0410-961f-82ee72b054a4>
Sat, 13 Oct 2007 21:40:11 +0000 (21:40 +0000)
        * config/rs6000/aix{41,43,51,52}.h (TARGET_ALTIVEC): Define to 0.
        (TARGET_ALTIVEC_ABI): Same.
        * config/rs6000/aix.h (TARGET_ALTIVEC): Delete.
        (TARGET_ALTIVEC_ABI): Delete.
        * config.gcc (powerpc-ibm-aix5*): Rename to aix5.2.  Add new
        stanza defaulting to aix5.3.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@129285 138bc75d-0d04-0410-961f-82ee72b054a4

gcc/ChangeLog
gcc/config.gcc
gcc/config/rs6000/aix.h
gcc/config/rs6000/aix41.h
gcc/config/rs6000/aix43.h
gcc/config/rs6000/aix51.h
gcc/config/rs6000/aix52.h
gcc/config/rs6000/aix53.h [new file with mode: 0644]

index 5be6f5a..0069311 100644 (file)
@@ -1,3 +1,13 @@
+2007-10-13  David Edelsohn  <edelsohn@gnu.org>
+
+       * config/rs6000/aix53.h: New file.
+       * config/rs6000/aix{41,43,51,52}.h (TARGET_ALTIVEC): Define to 0.
+       (TARGET_ALTIVEC_ABI): Same.
+       * config/rs6000/aix.h (TARGET_ALTIVEC): Delete.
+       (TARGET_ALTIVEC_ABI): Delete.
+       * config.gcc (powerpc-ibm-aix5*): Rename to aix5.2.  Add new
+       stanza defaulting to aix5.3.
+
 2007-10-12  Nathan Froyd  <froydnj@codesourcery.com>
 
        * config/i386/i386.md (SI_REG, DI_REG): New constants.
index 2b89432..42d47e3 100644 (file)
@@ -2085,7 +2085,7 @@ rs6000-ibm-aix5.1.* | powerpc-ibm-aix5.1.*)
        thread_file='aix'
        extra_headers=
        ;;
-rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
+rs6000-ibm-aix5.2.* | powerpc-ibm-aix5.2.*)
        tm_file="${tm_file} rs6000/aix.h rs6000/aix52.h rs6000/xcoff.h"
        tmake_file=rs6000/t-aix52
        extra_options="${extra_options} rs6000/aix64.opt"
@@ -2093,6 +2093,14 @@ rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
        thread_file='aix'
        extra_headers=
        ;;
+rs6000-ibm-aix[56789].* | powerpc-ibm-aix[56789].*)
+       tm_file="${tm_file} rs6000/aix.h rs6000/aix53.h rs6000/xcoff.h"
+       tmake_file=rs6000/t-aix52
+       extra_options="${extra_options} rs6000/aix64.opt"
+       use_collect2=yes
+       thread_file='aix'
+       extra_headers=
+       ;;
 s390-*-linux*)
        tm_file="s390/s390.h dbxelf.h elfos.h svr4.h linux.h s390/linux.h"
        tmake_file="${tmake_file} t-dfprules s390/t-crtstuff s390/t-linux"
index 6f91c57..99587bb 100644 (file)
 #undef  STACK_BOUNDARY
 #define STACK_BOUNDARY 128
 
-/* AIX does not support Altivec.  */
-#undef  TARGET_ALTIVEC
-#define TARGET_ALTIVEC 0
-#undef  TARGET_ALTIVEC_ABI
-#define TARGET_ALTIVEC_ABI 0
 #undef  TARGET_IEEEQUAD
 #define TARGET_IEEEQUAD 0
 
index c8d435e..a109084 100644 (file)
 #undef PROCESSOR_DEFAULT
 #define PROCESSOR_DEFAULT PROCESSOR_PPC601
 
+/* AIX does not support Altivec.  */
+#undef  TARGET_ALTIVEC
+#define TARGET_ALTIVEC 0
+#undef  TARGET_ALTIVEC_ABI
+#define TARGET_ALTIVEC_ABI 0
+
 /* Define this macro as a C expression for the initializer of an
    array of string to tell the driver program which options are
    defaults for this target and thus do not need to be handled
index 52a7796..56b24a3 100644 (file)
@@ -122,6 +122,12 @@ do {                                                                       \
 #undef PROCESSOR_DEFAULT
 #define PROCESSOR_DEFAULT PROCESSOR_PPC604e
 
+/* AIX does not support Altivec.  */
+#undef  TARGET_ALTIVEC
+#define TARGET_ALTIVEC 0
+#undef  TARGET_ALTIVEC_ABI
+#define TARGET_ALTIVEC_ABI 0
+
 /* Define this macro as a C expression for the initializer of an
    array of string to tell the driver program which options are
    defaults for this target and thus do not need to be handled
index 5e03d4d..4a5a9ec 100644 (file)
@@ -118,6 +118,12 @@ do {                                                                       \
 #undef PROCESSOR_DEFAULT
 #define PROCESSOR_DEFAULT PROCESSOR_PPC604e
 
+/* AIX does not support Altivec.  */
+#undef  TARGET_ALTIVEC
+#define TARGET_ALTIVEC 0
+#undef  TARGET_ALTIVEC_ABI
+#define TARGET_ALTIVEC_ABI 0
+
 /* Define this macro as a C expression for the initializer of an
    array of string to tell the driver program which options are
    defaults for this target and thus do not need to be handled
index 0bcefb2..f0744e1 100644 (file)
@@ -122,6 +122,12 @@ do {                                                                       \
 #undef  TARGET_POWER
 #define TARGET_POWER 0
 
+/* AIX does not support Altivec.  */
+#undef  TARGET_ALTIVEC
+#define TARGET_ALTIVEC 0
+#undef  TARGET_ALTIVEC_ABI
+#define TARGET_ALTIVEC_ABI 0
+
 /* Define this macro as a C expression for the initializer of an
    array of string to tell the driver program which options are
    defaults for this target and thus do not need to be handled
diff --git a/gcc/config/rs6000/aix53.h b/gcc/config/rs6000/aix53.h
new file mode 100644 (file)
index 0000000..49c09ed
--- /dev/null
@@ -0,0 +1,194 @@
+/* Definitions of target machine for GNU compiler,
+   for IBM RS/6000 POWER running AIX V5.2.
+   Copyright (C) 2002, 2003, 2004, 2005, 2006, 2007
+   Free Software Foundation, Inc.
+   Contributed by David Edelsohn (edelsohn@gnu.org).
+
+   This file is part of GCC.
+
+   GCC is free software; you can redistribute it and/or modify it
+   under the terms of the GNU General Public License as published
+   by the Free Software Foundation; either version 3, or (at your
+   option) any later version.
+
+   GCC is distributed in the hope that it will be useful, but WITHOUT
+   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+   or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
+   License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with GCC; see the file COPYING3.  If not see
+   <http://www.gnu.org/licenses/>.  */
+
+/* Sometimes certain combinations of command options do not make sense
+   on a particular target machine.  You can define a macro
+   `OVERRIDE_OPTIONS' to take account of this.  This macro, if
+   defined, is executed once just after all the command options have
+   been parsed.
+
+   The macro SUBTARGET_OVERRIDE_OPTIONS is provided for subtargets, to
+   get control.  */
+
+#define NON_POWERPC_MASKS (MASK_POWER | MASK_POWER2)
+#define SUBTARGET_OVERRIDE_OPTIONS                                     \
+do {                                                                   \
+  if (TARGET_64BIT && (target_flags & NON_POWERPC_MASKS))              \
+    {                                                                  \
+      target_flags &= ~NON_POWERPC_MASKS;                              \
+      warning (0, "-maix64 and POWER architecture are incompatible");  \
+    }                                                                  \
+  if (TARGET_64BIT && ! TARGET_POWERPC64)                              \
+    {                                                                  \
+      target_flags |= MASK_POWERPC64;                                  \
+      warning (0, "-maix64 requires PowerPC64 architecture remain enabled"); \
+    }                                                                  \
+  if (TARGET_SOFT_FLOAT && TARGET_LONG_DOUBLE_128)                     \
+    {                                                                  \
+      rs6000_long_double_type_size = 64;                               \
+      if (rs6000_explicit_options.long_double)                         \
+       warning (0, "soft-float and long-double-128 are incompatible"); \
+    }                                                                  \
+  if (TARGET_POWERPC64 && ! TARGET_64BIT)                              \
+    {                                                                  \
+      error ("-maix64 required: 64-bit computation with 32-bit addressing not yet supported"); \
+    }                                                                  \
+} while (0);
+
+#undef ASM_SPEC
+#define ASM_SPEC "-u %{maix64:-a64 %{!mcpu*:-mppc64}} %(asm_cpu)"
+
+/* Common ASM definitions used by ASM_SPEC amongst the various targets
+   for handling -mcpu=xxx switches.  */
+#undef ASM_CPU_SPEC
+#define ASM_CPU_SPEC \
+"%{!mcpu*: %{!maix64: \
+  %{mpowerpc64: -mppc64} \
+  %{maltivec: -m970} \
+  %{!maltivec: %{!mpower64: %(asm_default)}}}} \
+%{mcpu=power3: -m620} \
+%{mcpu=power4: -mpwr4} \
+%{mcpu=power5: -mpwr5} \
+%{mcpu=power5+: -mpwr5x} \
+%{mcpu=power6: -mpwr6} \
+%{mcpu=power6x: -mpwr6} \
+%{mcpu=powerpc: -mppc} \
+%{mcpu=rs64a: -mppc} \
+%{mcpu=603: -m603} \
+%{mcpu=603e: -m603} \
+%{mcpu=604: -m604} \
+%{mcpu=604e: -m604} \
+%{mcpu=620: -m620} \
+%{mcpu=630: -m620} \
+%{mcpu=970: -m970} \
+%{mcpu=G5: -m970}"
+
+#undef ASM_DEFAULT_SPEC
+#define ASM_DEFAULT_SPEC "-mppc"
+
+#undef TARGET_OS_CPP_BUILTINS
+#define TARGET_OS_CPP_BUILTINS()     \
+  do                                 \
+    {                                \
+      builtin_define ("_AIX43");     \
+      builtin_define ("_AIX51");     \
+      builtin_define ("_AIX52");     \
+      builtin_define ("_AIX53");     \
+      TARGET_OS_AIX_CPP_BUILTINS (); \
+    }                                \
+  while (0)
+
+#undef CPP_SPEC
+#define CPP_SPEC "%{posix: -D_POSIX_SOURCE}    \
+  %{ansi: -D_ANSI_C_SOURCE}                    \
+  %{maix64: -D__64BIT__}                       \
+  %{mpe: -I/usr/lpp/ppe.poe/include}           \
+  %{pthread: -D_THREAD_SAFE}"
+
+/* The GNU C++ standard library requires that these macros be 
+   defined.  Synchronize with libstdc++ os_defines.h.  */
+#undef CPLUSPLUS_CPP_SPEC                       
+#define CPLUSPLUS_CPP_SPEC                     \
+  "-D_ALL_SOURCE                               \
+   %{maix64: -D__64BIT__}                      \
+   %{mpe: -I/usr/lpp/ppe.poe/include}          \
+   %{pthread: -D_THREAD_SAFE}"
+
+#undef  TARGET_DEFAULT
+#define TARGET_DEFAULT (MASK_POWERPC | MASK_NEW_MNEMONICS)
+
+#undef  PROCESSOR_DEFAULT
+#define PROCESSOR_DEFAULT PROCESSOR_POWER5
+#undef  PROCESSOR_DEFAULT64
+#define PROCESSOR_DEFAULT64 PROCESSOR_POWER5
+
+#undef  TARGET_POWER
+#define TARGET_POWER 0
+
+/* Define this macro as a C expression for the initializer of an
+   array of string to tell the driver program which options are
+   defaults for this target and thus do not need to be handled
+   specially when using `MULTILIB_OPTIONS'.
+
+   Do not define this macro if `MULTILIB_OPTIONS' is not defined in
+   the target makefile fragment or if none of the options listed in
+   `MULTILIB_OPTIONS' are set by default.  *Note Target Fragment::.  */
+
+#undef MULTILIB_DEFAULTS
+
+#undef LIB_SPEC
+#define LIB_SPEC "%{pg:-L/lib/profiled -L/usr/lib/profiled}\
+   %{p:-L/lib/profiled -L/usr/lib/profiled}\
+   %{!maix64:%{!shared:%{g*:-lg}}}\
+   %{mpe:-L/usr/lpp/ppe.poe/lib -lmpi -lvtd}\
+   %{pthread:-lpthreads} -lc"
+
+#undef LINK_SPEC
+#define LINK_SPEC "-bpT:0x10000000 -bpD:0x20000000 %{!r:-btextro} -bnodelcsect\
+   %{static:-bnso %(link_syscalls) } %{shared:-bM:SRE %{!e:-bnoentry}}\
+   %{!maix64:%{!shared:%{g*: %(link_libg) }}} %{maix64:-b64}\
+   %{mpe:-binitfini:poe_remote_main}"
+
+#undef STARTFILE_SPEC
+#define STARTFILE_SPEC "%{!shared:\
+   %{maix64:%{pg:gcrt0_64%O%s}%{!pg:%{p:mcrt0_64%O%s}%{!p:crt0_64%O%s}}}\
+   %{!maix64:\
+     %{pthread:%{pg:gcrt0_r%O%s}%{!pg:%{p:mcrt0_r%O%s}%{!p:crt0_r%O%s}}}\
+     %{!pthread:%{pg:gcrt0%O%s}%{!pg:%{p:mcrt0%O%s}%{!p:crt0%O%s}}}}}"
+
+/* AIX V5 typedefs ptrdiff_t as "long" while earlier releases used "int".  */
+
+#undef PTRDIFF_TYPE
+#define PTRDIFF_TYPE "long int"
+
+/* Type used for wchar_t, as a string used in a declaration.  */
+#undef  WCHAR_TYPE
+#define WCHAR_TYPE (!TARGET_64BIT ? "short unsigned int" : "unsigned int")
+
+/* Width of wchar_t in bits.  */
+#undef  WCHAR_TYPE_SIZE
+#define WCHAR_TYPE_SIZE (!TARGET_64BIT ? 16 : 32)
+
+/* AIX V5 uses PowerPC nop (ori 0,0,0) instruction as call glue for PowerPC
+   and "cror 31,31,31" for POWER architecture.  */
+
+#undef RS6000_CALL_GLUE
+#define RS6000_CALL_GLUE "{cror 31,31,31|nop}"
+
+/* AIX 4.2 and above provides initialization and finalization function
+   support from linker command line.  */
+#undef HAS_INIT_SECTION
+#define HAS_INIT_SECTION
+
+#undef LD_INIT_SWITCH
+#define LD_INIT_SWITCH "-binitfini"
+
+/* AIX 5.2 has the float and long double forms of math functions.  */
+#undef TARGET_C99_FUNCTIONS
+#define TARGET_C99_FUNCTIONS  1
+
+#ifndef _AIX52
+extern long long int    atoll(const char *);  
+#endif
+
+/* This target uses the aix64.opt file.  */
+#define TARGET_USES_AIX64_OPT 1