-# Doxyfile 1.2.4
+# Doxyfile 1.2.6
# This file describes the settings to be used by doxygen for a project
#
# TAG += value [value, ...]
# Values that contain spaces should be placed between quotes (" ")
+### When doxygen is run, the current directory is the top of
+### the libstdc++-v3 source directory. Keep this in mind while
+### writing relative-path directories.
+
#---------------------------------------------------------------------------
# General configuration options
#---------------------------------------------------------------------------
# The PROJECT_NAME tag is a single word (or a sequence of words surrounded
# by quotes) that should identify the project.
-PROJECT_NAME = "libstdc++-v3"
+PROJECT_NAME = libstdc++-v3
# The PROJECT_NUMBER tag can be used to enter a project or revision number.
# This could be handy for archiving the generated documentation or
# the file and class documentation (similar to JavaDoc).
# Set to NO to disable this.
-BRIEF_MEMBER_DESC = NO
+BRIEF_MEMBER_DESC = YES
# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend
# the brief description of a member or function before the detailed description.
# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
# brief descriptions will be completely suppressed.
-REPEAT_BRIEF = NO
+REPEAT_BRIEF = YES
# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
# Doxygen will generate a detailed section even if there is only a brief
GENERATE_TESTLIST = NO
+# The GENERATE_BUGLIST tag can be used to enable (YES) or
+# disable (NO) the bug list. This list is created by putting \bug
+# commands in the documentation.
+
+GENERATE_BUGLIST = YES
+
# This tag can be used to specify a number of aliases that acts
# as commands in the documentation. An alias has the form "name=value".
# For example adding "sideeffect=\par Side Effects:\n" will allow you to
# will result in a user defined paragraph with heading "Side Effects:".
# You can put \n's in the value part of an alias to insert newlines.
-#ALIASES =
+ALIASES =
+
+# The MAX_INITIALIZER_LINES tag determines the maximum number of lines
+# the initial value of a variable or define consist of for it to appear in
+# the documentation. If the initializer consists of more lines than specified
+# here it will be hidden. Use a value of 0 to hide initializers completely.
+# The appearance of the initializer of individual variables and defines in the
+# documentation can be controlled using \showinitializer or \hideinitializer
+# command in the documentation regardless of this setting.
+
+MAX_INITIALIZER_LINES = 30
+
+# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
+# only. Doxygen will then generate output that is more tailored for C.
+# For instance some of the names that are used will be different. The list
+# of all members will be omitted, etc.
+
+OPTIMIZE_OUTPUT_FOR_C = NO
+
+# Set the SHOW_USED_FILES tag to NO to disable the list of files generated
+# at the bottom of the documentation of classes and structs. If set to YES the
+# list will mention the files that were used to generate the documentation.
+
+SHOW_USED_FILES = YES
#---------------------------------------------------------------------------
# configuration options related to warning and progress messages
# generated by doxygen. Possible values are YES and NO. If left blank
# NO is used.
-### pme Turned off; apparently doxygen can't grok templates
WARNINGS = NO
# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings
# and error messages should be written. If left blank the output is written
# to stderr.
-#WARN_LOGFILE =
+WARN_LOGFILE =
#---------------------------------------------------------------------------
# configuration options related to the input files
#---------------------------------------------------------------------------
-# The INPUT tag can be used to specify the files and/or directories that contain
+# The INPUT tag can be used to specify the files and/or directories that contain
# documented source files. You may enter file names like "myfile.cpp" or
# directories like "/usr/src/myproject". Separate the files or directories
# with spaces.
-INPUT = docs/doxygen libsupc++ include src
+INPUT = docs/doxygen \
+ libsupc++ \
+ include \
+ src
# If the value of the INPUT tag contains directories, you can use the
# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp
# and *.h) to filter out the source-files in the directories. If left
# blank all files are included.
-FILE_PATTERNS = *.doxy *.cc *.tcc *.h c++config
+FILE_PATTERNS = *.doxy \
+ *.cc \
+ *.tcc \
+ *.h \
+ c++config
# The RECURSIVE tag can be used to turn specify whether or not subdirectories
# should be searched for input files as well. Possible values are YES and NO.
# The EXCLUDE tag can be used to specify files and/or directories that should
# excluded from the INPUT source files. This way you can easily exclude a
# subdirectory from a directory tree whose root is specified with the INPUT tag.
-EXCLUDE = include/c include/c_shadow
+
+EXCLUDE = include/c \
+ include/c_shadow
# If the value of the INPUT tag contains directories, you can use the
# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
# INPUT_FILTER) will be used to filter the input files when producing source
# files to browse.
-#FILTER_SOURCE_FILES = NO
+FILTER_SOURCE_FILES = NO
#---------------------------------------------------------------------------
# configuration options related to the alphabetical class index
# fine-tune the look of the HTML output. If the tag is left blank doxygen
# will generate a default style sheet
-HTML_STYLESHEET =
+HTML_STYLESHEET = docs/doxygen/style.css
# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes,
# files or namespaces will be aligned in HTML using tables. If set to
GENERATE_HTMLHELP = NO
+# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag
+# controls if a separate .chi index file is generated (YES) or that
+# it should be included in the master .chm file (NO).
+
+GENERATE_CHI = NO
+
+# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag
+# controls whether a binary table of contents is generated (YES) or a
+# normal table of contents (NO) in the .chm file.
+
+BINARY_TOC = NO
+
+# The TOC_EXPAND flag can be set YES to add extra items for group members
+# to the contents of the Html help documentation and to the tree view.
+
+TOC_EXPAND = NO
+
# The DISABLE_INDEX tag can be used to turn on/off the condensed index at
# top of each HTML page. The value NO (the default) enables the index and
# the value YES disables it.
# This tag can be used to set the number of enum values (range [1..20])
# that doxygen will group on one line in the generated HTML documentation.
-#ENUM_VALUES_PER_LINE = 4
+ENUM_VALUES_PER_LINE = 4
-# If the GENERATE_TREEVIEW tag is set to YES, a side pannel will be
+# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be
# generated containing a tree-like index structure (just like the one that
# is generated for HTML Help). For this to work a browser that supports
# JavaScript and frames is required (for instance Netscape 4.0+
# used to set the initial width (in pixels) of the frame in which the tree
# is shown.
-#TREEVIEW_WIDTH = 250
+TREEVIEW_WIDTH = 250
#---------------------------------------------------------------------------
# configuration options related to the LaTeX output
# The TAGFILES tag can be used to specify one or more tagfiles.
-TAGFILES =
+TAGFILES =
# When a file name is specified after GENERATE_TAGFILE, doxygen will create
# a tag file that is based on the input files it reads.
# toolkit from AT&T and Lucent Bell Labs. The other options in this section
# have no effect if this option is set to NO (the default)
-HAVE_DOT = NO
+HAVE_DOT = YES
# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen
# will generate a graph for each documented class showing the direct and
# generate a legend page explaining the meaning of the various boxes and
# arrows in the dot generated graphs.
-#GENERATE_LEGEND = YES
+GENERATE_LEGEND = YES
+
+# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will
+# remove the intermedate dot files that are used to generate
+# the various graphs.
+
+DOT_CLEANUP = YES
#---------------------------------------------------------------------------
# Configuration::addtions related to the search engine
OSDN Git Service
