* config/h8300/h8300-protos.h: Add a prototype for

	general_operand_dst_push.
 	* config/h8300/h8300.c (general_operand_dst_push): New.
	* config/h8300/h8300.h (OK_FOR_T): New.
	(EXTRA_CONSTRAINT): Use it.
	* config/h8300/h8300.md (movqi_push): Remove and integrate into
	the existing movqi pattern.
	(movhi_push): Likewise.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@44283 138bc75d-0d04-0410-961f-82ee72b054a4

diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index e117154..74573a4 100644 (file)
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,3 +1,14 @@
+2001-07-23  Kazu Hirata  <kazu@hxi.com>
+
+       * config/h8300/h8300-protos.h: Add a prototype for
+       general_operand_dst_push.
+       * config/h8300/h8300.c (general_operand_dst_push): New.
+       * config/h8300/h8300.h (OK_FOR_T): New.
+       (EXTRA_CONSTRAINT): Use it.
+       * config/h8300/h8300.md (movqi_push): Remove and integrate into
+       the existing movqi pattern.
+       (movhi_push): Likewise.
+
 Mon Jul 23 23:34:07 CEST 2001  Jan Hubicka  <jh@suse.cz>
 
        * gcse.c (cprop_insn): Update call of cprop_cc0_jump.

diff --git a/gcc/config/h8300/h8300-protos.h b/gcc/config/h8300/h8300-protos.h
index 9b0fa02..4841d07 100644 (file)
--- a/gcc/config/h8300/h8300-protos.h
+++ b/gcc/config/h8300/h8300-protos.h
@@ -45,6 +45,7 @@ extern void split_adds_subs PARAMS ((enum machine_mode, rtx[]));
 
 extern int general_operand_src PARAMS ((rtx, enum machine_mode));
 extern int general_operand_dst PARAMS ((rtx, enum machine_mode));
+extern int general_operand_dst_push PARAMS ((rtx, enum machine_mode mode));
 extern int o_operand PARAMS ((rtx, enum machine_mode));
 extern int p_operand PARAMS ((rtx, enum machine_mode));
 extern int call_insn_operand PARAMS ((rtx, enum machine_mode));

diff --git a/gcc/config/h8300/h8300.c b/gcc/config/h8300/h8300.c
index 0d22818..4628208 100644 (file)
--- a/gcc/config/h8300/h8300.c
+++ b/gcc/config/h8300/h8300.c
@@ -537,7 +537,7 @@ general_operand_src (op, mode)
 }
 
 /* Return true if OP is a valid destination operand for an integer move
-   instruction.  */
+   instruction, excluding those involving pre_modify.  */
 
 int
 general_operand_dst (op, mode)
@@ -549,6 +549,20 @@ general_operand_dst (op, mode)
   return general_operand (op, mode);
 }
 
+/* Return true if OP is a valid destination operand for an integer move
+   instruction, including those involving pre_modify.  */
+
+int
+general_operand_dst_push (op, mode)
+     rtx op;
+     enum machine_mode mode;
+{
+  if (push_operand (op, mode))
+    return 1;
+
+  return general_operand_dst (op, mode);
+}
+
 /* Return true if OP is a const valid for a bit clear instruction.  */
 
 int

diff --git a/gcc/config/h8300/h8300.h b/gcc/config/h8300/h8300.h
index ec3a1cb..9df9fa8 100644 (file)
--- a/gcc/config/h8300/h8300.h
+++ b/gcc/config/h8300/h8300.h
@@ -840,7 +840,17 @@ struct cum_arg
   (GET_CODE (X) == CONST_INT && TARGET_H8300H          \
    && 0xffff00 <= INTVAL (X) && INTVAL (X) <= 0xffffff)
 
-/* 'U' if valid for a bset destination;
+/* 'T' if valid for a push destination using pre_modify.  */
+#define OK_FOR_T(OP)                                                         \
+  (GET_CODE (OP) == MEM                                                              \
+   && GET_CODE (XEXP (OP, 0)) == PRE_MODIFY                                  \
+   && GET_CODE (XEXP (XEXP (OP, 0), 1)) == PLUS                                      \
+   && XEXP (XEXP (XEXP (OP, 0), 1), 0) == XEXP (XEXP (OP, 0), 0)             \
+   && GET_CODE (XEXP (XEXP (XEXP (OP, 0), 1), 1)) == CONST_INT               \
+   && INTVAL (XEXP (XEXP (XEXP (OP, 0), 1), 1)) == - (int) STACK_BOUNDARY / 8 \
+   && XEXP (XEXP (OP, 0), 0) == stack_pointer_rtx)
+
+ /* 'U' if valid for a bset destination;
    i.e. a register, register indirect, or the eightbit memory region
    (a SYMBOL_REF with an SYMBOL_REF_FLAG set).
 
@@ -862,7 +872,8 @@ struct cum_arg
        && GET_CODE (XEXP (OP, 0)) == CONST_INT))
 
 #define EXTRA_CONSTRAINT(OP, C)                        \
-  ((C) == 'U' ? OK_FOR_U (OP) :                        \
+  ((C) == 'T' ? OK_FOR_T (OP) :                        \
+   (C) == 'U' ? OK_FOR_U (OP) :                        \
    0)
 \f
 /* GO_IF_LEGITIMATE_ADDRESS recognizes an RTL expression

diff --git a/gcc/config/h8300/h8300.md b/gcc/config/h8300/h8300.md
index a10f723..ed52811 100644 (file)
--- a/gcc/config/h8300/h8300.md
+++ b/gcc/config/h8300/h8300.md
@@ -106,40 +106,42 @@
 
 ;; movqi
 
-(define_insn "movqi_push"
-  [(set (match_operand:QI 0 "push_operand" "=<")
-       (match_operand:QI 1 "register_operand" "r"))]
-  ""
-  "*
-{
-  if (TARGET_H8300)
-    return \"push.w    %T1\";
-  else
-    return \"push.l    %S1\";
-}"
-  [(set (attr "length") (if_then_else (eq_attr "cpu" "h8300") (const_int 2) (const_int 4)))
-   (set_attr "cc" "set_znv")])
+(define_insn ""
+  [(set (match_operand:QI 0 "general_operand_dst_push" "=r,r ,<,T,r,r,m")
+       (match_operand:QI 1 "general_operand_src"      " I,r>,r,r,n,m,r"))]
+  "TARGET_H8300
+   && (register_operand (operands[0],QImode)
+       || register_operand (operands[1], QImode))"
+  "@
+   sub.b       %X0,%X0
+   mov.b       %R1,%X0
+   mov.b       %X1,%R0
+   mov.w       %T1,@-r7
+   mov.b       %R1,%X0
+   mov.b       %R1,%X0
+   mov.b       %X1,%R0"
+  [(set_attr "length" "2,2,2,2,2,4,4")
+   (set_attr "cc" "set_zn,set_znv,set_znv,clobber,set_znv,set_znv,set_znv")])
 
 (define_insn ""
-  [(set (match_operand:QI 0 "general_operand_dst" "=r,r,<,r,r,m")
-       (match_operand:QI 1 "general_operand_src" "I,r>,r,n,m,r"))]
-  "register_operand (operands[0],QImode)
-   || register_operand (operands[1], QImode)"
+  [(set (match_operand:QI 0 "general_operand_dst_push" "=r,r ,<,r,T,r,m")
+       (match_operand:QI 1 "general_operand_src"      " I,r>,r,n,r,m,r"))]
+  "(TARGET_H8300H || TARGET_H8300S)
+   && (register_operand (operands[0],QImode)
+       || register_operand (operands[1], QImode))"
   "@
    sub.b       %X0,%X0
    mov.b       %R1,%X0
    mov.b       %X1,%R0
    mov.b       %R1,%X0
+   mov.l       %S1,@-er7
    mov.b       %R1,%X0
    mov.b       %X1,%R0"
-  [(set_attr_alternative "length"
-     [(const_int 2) (const_int 2) (const_int 2) (const_int 2)
-      (if_then_else (eq_attr "cpu" "h8300") (const_int 4) (const_int 8))
-      (if_then_else (eq_attr "cpu" "h8300") (const_int 4) (const_int 8))])
-   (set_attr "cc" "set_zn,set_znv,set_znv,set_znv,set_znv,set_znv")])
+  [(set_attr "length" "2,2,2,2,4,8,8")
+   (set_attr "cc" "set_zn,set_znv,set_znv,clobber,set_znv,set_znv,set_znv")])
 
 (define_expand "movqi"
-  [(set (match_operand:QI 0 "general_operand_dst" "")
+  [(set (match_operand:QI 0 "general_operand_dst_push" "")
        (match_operand:QI 1 "general_operand_src" ""))]
   ""
   "
@@ -168,27 +170,12 @@
 
 ;; movhi
 
-;; ??? We use push.l on the h8300h to push a 16bit value?!?  We have
-;; 16bit push insns!
-(define_insn "movhi_push"
-  [(set (match_operand:HI 0 "push_operand" "=<")
-       (match_operand:HI 1 "register_operand" "r"))]
-  ""
-  "*
-{
-  if (TARGET_H8300)
-    return \"push.w    %T1\";
-  else
-    return \"push.l    %S1\";
-}"
-  [(set (attr "length") (if_then_else (eq_attr "cpu" "h8300") (const_int 2) (const_int 4)))
-   (set_attr "cc" "set_znv")])
-
 (define_insn ""
   [(set (match_operand:HI 0 "general_operand_dst" "=r,r,<,r,r,m")
        (match_operand:HI 1 "general_operand_src" "I,r>,r,i,m,r"))]
-  "register_operand (operands[0],HImode)
-   || register_operand (operands[1], HImode)"
+  "TARGET_H8300
+   && (register_operand (operands[0],HImode)
+       || register_operand (operands[1], HImode))"
   "@
    sub.w       %T0,%T0
    mov.w       %T1,%T0
@@ -196,14 +183,28 @@
    mov.w       %T1,%T0
    mov.w       %T1,%T0
    mov.w       %T1,%T0"
-  [(set_attr_alternative "length"
-     [(const_int 2) (const_int 2) (const_int 2) (const_int 4)
-      (if_then_else (eq_attr "cpu" "h8300") (const_int 4) (const_int 8))
-      (if_then_else (eq_attr "cpu" "h8300") (const_int 4) (const_int 8))])
+  [(set_attr "length" "2,2,2,4,4,4")
    (set_attr "cc" "set_zn,set_znv,set_znv,set_znv,set_znv,set_znv")])
 
+(define_insn ""
+  [(set (match_operand:HI 0 "general_operand_dst_push" "=r,r,<,T,r,r,m")
+       (match_operand:HI 1 "general_operand_src" "I,r>,r,r,i,m,r"))]
+  "(TARGET_H8300H || TARGET_H8300S)
+   && (register_operand (operands[0],HImode)
+       || register_operand (operands[1], HImode))"
+  "@
+   sub.w       %T0,%T0
+   mov.w       %T1,%T0
+   mov.w       %T1,%T0
+   mov.l       %S1,@-er7
+   mov.w       %T1,%T0
+   mov.w       %T1,%T0
+   mov.w       %T1,%T0"
+  [(set_attr "length" "2,2,2,4,4,8,8")
+   (set_attr "cc" "set_zn,set_znv,set_znv,clobber,set_znv,set_znv,set_znv")])
+
 (define_expand "movhi"
-  [(set (match_operand:HI 0 "general_operand_dst" "")
+  [(set (match_operand:HI 0 "general_operand_dst_push" "")
        (match_operand:HI 1 "general_operand_src" ""))]
   ""
   "