libgloss:

	* configure.in: Don't handle strongarm, ep9312 and xscale target
	names.
	* configure: Regenerate.
	* libnosys/configure.in: Don't handle strongarm and thumb target
	names.
	* libnosys/configure: Regenerate.

newlib:
	* configure.host: Don't handle ep9312, strongarm, xscale and thumb
	target names.
	* libc/machine/configure.in: Don't handle xscale target names.
	* libc/machine/configure: Regenerate.

diff --git a/libgloss/ChangeLog b/libgloss/ChangeLog
index 629fb88..fa25a5c 100644 (file)
--- a/libgloss/ChangeLog
+++ b/libgloss/ChangeLog
@@ -1,3 +1,12 @@
+2011-06-14  Joseph Myers  <joseph@codesourcery.com>
+
+       * configure.in: Don't handle strongarm, ep9312 and xscale target
+       names.
+       * configure: Regenerate.
+       * libnosys/configure.in: Don't handle strongarm and thumb target
+       names.
+       * libnosys/configure: Regenerate.
+
 2011-05-27  Nick Clifton  <nickc@redhat.com>
 
        * v8500/sbrk.c (_sbrk): Tidy code.

diff --git a/libgloss/configure b/libgloss/configure
index 55a30ae..e897d3a 100755 (executable)
--- a/libgloss/configure
+++ b/libgloss/configure
@@ -2557,7 +2557,7 @@ case "${target}" in
        subdirs="$subdirs rx"
 
        ;;
-  strongarm-*-elf | strongarm-*-coff | arm*-*-elf | arm*-*-coff | ep9312-*-elf | ep9312-*-coff | xscale-*-elf | xscale-*-coff | *arm-*-*)
+  arm*-*-elf | arm*-*-coff | arm-*-*)
        subdirs="$subdirs arm"
 
        ;;

diff --git a/libgloss/configure.in b/libgloss/configure.in
index 8bbe0ca..a1eb47c 100644 (file)
--- a/libgloss/configure.in
+++ b/libgloss/configure.in
@@ -124,7 +124,7 @@ case "${target}" in
   rx*-*-elf)
        AC_CONFIG_SUBDIRS([rx])
        ;;
-  strongarm-*-elf | strongarm-*-coff | arm*-*-elf | arm*-*-coff | ep9312-*-elf | ep9312-*-coff | xscale-*-elf | xscale-*-coff | *arm-*-*)
+  arm*-*-elf | arm*-*-coff | arm-*-*)
        AC_CONFIG_SUBDIRS([arm])
        ;;
   spu-*-elf)

diff --git a/libgloss/libnosys/configure b/libgloss/libnosys/configure
index 776971b..7d8603d 100755 (executable)
--- a/libgloss/libnosys/configure
+++ b/libgloss/libnosys/configure
@@ -2050,8 +2050,6 @@ case "${target}" in
        ;;
   arm-*-*)
        ;;
-  strongarm-*-*)
-       ;;
   bfin-*-*)
        ;;
   cris-*-* | crisv32-*-*)
@@ -2078,10 +2076,6 @@ case "${target}" in
        ;;
   sparc64-*-*)
        ;;
-  thumb-*-pe)
-       ;;
-  thumb-*-*)
-       ;;
   v850*-*-*)
        ;;
   w65-*-*)

diff --git a/libgloss/libnosys/configure.in b/libgloss/libnosys/configure.in
index 218c995..3658ebf 100644 (file)
--- a/libgloss/libnosys/configure.in
+++ b/libgloss/libnosys/configure.in
@@ -49,8 +49,6 @@ case "${target}" in
        ;;
   arm-*-*)
        ;;
-  strongarm-*-*)
-       ;;
   bfin-*-*)
        ;;
   cris-*-* | crisv32-*-*)
@@ -77,10 +75,6 @@ case "${target}" in
        ;;
   sparc64-*-*)
        ;;
-  thumb-*-pe)
-       ;;
-  thumb-*-*)
-       ;;
   v850*-*-*)
        ;;
   w65-*-*)

diff --git a/newlib/ChangeLog b/newlib/ChangeLog
index 350c933..ae6dcc8 100644 (file)
--- a/newlib/ChangeLog
+++ b/newlib/ChangeLog
@@ -1,3 +1,10 @@
+2011-06-14  Joseph Myers  <joseph@codesourcery.com>
+
+       * configure.host: Don't handle ep9312, strongarm, xscale and thumb
+       target names.
+       * libc/machine/configure.in: Don't handle xscale target names.
+       * libc/machine/configure: Regenerate.
+
 2011-06-14  Craig Howland <howland@LGSInnovations.com>
 
        * libc/time/tzset_r.c (tzset_r):  Correct behavior for changing from

diff --git a/newlib/configure.host b/newlib/configure.host
index a71d630..9661f69 100644 (file)
--- a/newlib/configure.host
+++ b/newlib/configure.host
@@ -122,9 +122,6 @@ case "${host_cpu}" in
   d30v*)
        machine_dir=d30v
        ;;
-  ep9312)
-       machine_dir=arm
-       ;;
   fido)
        machine_dir=m68k
        newlib_cflags="${newlib_cflags} -DCOMPACT_CTYPE"
@@ -242,15 +239,6 @@ case "${host_cpu}" in
        # FIXME: Might wish to make MALLOC_ALIGNMENT more generic.
        newlib_cflags="${newlib_cflags} -DMALLOC_ALIGNMENT=8"
        ;;
-  strongarm)
-       machine_dir=arm
-       ;;
-  xscale)
-       machine_dir=xscale
-       ;;
-  thumb)
-       machine_dir=arm
-       ;;
   tic4x|c4x)
        machine_dir=tic4x
        ;;
@@ -393,12 +381,6 @@ case "${host}" in
   d30v*)
        sys_dir=
        ;;
-  ep9312-*-*)
-       sys_dir=arm
-       if [ "x${newlib_may_supply_syscalls}" = "xno" ] ; then
-         have_crt0="no"
-       fi
-       ;;
   frv*)
         sys_dir=
         ;;
@@ -495,18 +477,6 @@ case "${host}" in
        default_newlib_io_long_long="yes"
        default_newlib_atexit_dynamic_alloc="no"
        ;;
-  strongarm-*-*)
-       sys_dir=arm
-       if [ "x${newlib_may_supply_syscalls}" = "xno" ] ; then
-         have_crt0="no"
-       fi
-       ;;
-  thumb-*-*)
-       sys_dir=arm
-       if [ "x${newlib_may_supply_syscalls}" = "xno" ] ; then
-         have_crt0="no"
-       fi
-       ;;
   tic6x*)
        newlib_cflags="${newlib_cflags} -DMISSING_SYSCALL_NAMES"
        have_crt0="no"
@@ -529,12 +499,6 @@ case "${host}" in
   w65-*-*)
        sys_dir=w65
        ;;
-  xscale-*-*)
-       sys_dir=arm
-       if [ "x${newlib_may_supply_syscalls}" = "xno" ] ; then
-         have_crt0="no"
-       fi
-       ;;
   z8k-*-coff)
        sys_dir=z8ksim
        ;;
@@ -596,7 +560,6 @@ case "${host}" in
 # to create the program's environment.
 # If --disable-newlib-supplied-syscalls is specified, then the end-user
 # may specify the protocol via gcc spec files supplied by libgloss.
-# See also thumb below.
        if [ "x${newlib_may_supply_syscalls}" = "xyes" ] ; then
 #         newlib_cflags="${newlib_cflags} -DARM_RDP_MONITOR"
          newlib_cflags="${newlib_cflags} -DARM_RDI_MONITOR"
@@ -631,12 +594,6 @@ case "${host}" in
        newlib_cflags="${newlib_cflags} -DABORT_MESSAGE -DSMALL_MEMORY -DMISSING_SYSCALL_NAMES"
        syscall_dir=
        ;;
-  ep9312-*-*)
-       syscall_dir=syscalls
-       if [ "x${newlib_may_supply_syscalls}" = "xyes" ] ; then
-         newlib_cflags="${newlib_cflags} -DARM_RDI_MONITOR"
-       fi
-       ;;
   fido-*-elf)
        newlib_cflags="${newlib_cflags} -DHAVE_RENAME -DHAVE_SYSTEM -DMISSING_SYSCALL_NAMES"
        syscall_dir=
@@ -760,27 +717,6 @@ case "${host}" in
                newlib_cflags="${newlib_cflags} -DTARGET_PTR_SIZE=64" ;;
        esac
        ;;
-  strongarm-*-*)
-       syscall_dir=syscalls
-       ;;
-  thumb-*-pe)
-       syscall_dir=syscalls
-# Don't use the debugging protocols just yet.
-       ;;
-  thumb-*-*)
-       syscall_dir=syscalls
-# If newlib is supplying syscalls, select which debug protocol is being used.
-# ARM_RDP_MONITOR selects the Demon monitor.
-# ARM_RDI_MONITOR selects the Angel monitor.
-# If neither are defined, then hard coded defaults will be used
-# to create the program's environment.
-# If --disable-newlib-supplied-syscalls is specified, then the end-user
-# may specify the protocol via gcc spec files supplied by libgloss.
-       if [ "x${newlib_may_supply_syscalls}" = "xyes" ] ; then
-#         newlib_cflags="${newlib_cflags} -DARM_RDP_MONITOR"
-         newlib_cflags="${newlib_cflags} -DARM_RDI_MONITOR"
-       fi
-       ;;
   tic6x*)
        syscall_dir=
        newlib_cflags="${newlib_cflags} -DCLOCK_PROVIDED"
@@ -798,13 +734,6 @@ case "${host}" in
   xc16x-*)
           syscall_dir=syscalls
         ;;
-  xscale-*-*)
-       syscall_dir=syscalls
-       newlib_cflags="${newlib_cflags} -DHAVE_SYSTEM -DHAVE_RENAME"
-       if [ "x${newlib_may_supply_syscalls}" = "xyes" ] ; then
-         newlib_cflags="${newlib_cflags} -DARM_RDI_MONITOR"
-       fi
-       ;;
   xstormy16-*-*)
        syscall_dir=syscalls
        ;;

diff --git a/newlib/libc/machine/configure b/newlib/libc/machine/configure
index 3a4ece3..9d38f86 100755 (executable)
--- a/newlib/libc/machine/configure
+++ b/newlib/libc/machine/configure
@@ -651,6 +651,7 @@ ELIX_LEVEL_1_TRUE
 ELIX_LEVEL_0_FALSE
 ELIX_LEVEL_0_TRUE
 LDFLAGS
+NO_INCLUDE_LIST
 NEWLIB_CFLAGS
 CCASFLAGS
 CCAS
@@ -816,7 +817,6 @@ v850
 w65
 x86_64
 xc16x
-xscale
 xstormy16
 z8k'
 
@@ -3694,6 +3694,9 @@ newlib_cflags="${newlib_cflags} -fno-builtin"
 NEWLIB_CFLAGS=${newlib_cflags}
 
 
+NO_INCLUDE_LIST=${noinclude}
+
+
 LDFLAGS=${ldflags}
 
 
@@ -9660,10 +9663,6 @@ if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi
       hardcode_shlibpath_var=no
       ;;
 
-    freebsd1*)
-      ld_shlibs=no
-      ;;
-
     # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor
     # support.  Future versions do this automatically, but an explicit c++rt0.o
     # does not break anything, and helps significantly (at the cost of a little
@@ -10582,10 +10581,6 @@ dgux*)
   shlibpath_var=LD_LIBRARY_PATH
   ;;
 
-freebsd1*)
-  dynamic_linker=no
-  ;;
-
 freebsd* | dragonfly*)
   # DragonFly does not have aout.  When/if they implement a new
   # versioning mechanism, adjust this.
@@ -11445,7 +11440,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11448 "configure"
+#line 11443 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11551,7 +11546,7 @@ else
   lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
   lt_status=$lt_dlunknown
   cat > conftest.$ac_ext <<_LT_EOF
-#line 11554 "configure"
+#line 11549 "configure"
 #include "confdefs.h"
 
 #if HAVE_DLFCN_H
@@ -11878,8 +11873,6 @@ subdirs="$subdirs a29k"
  ;;
        xc16x) subdirs="$subdirs xc16x"
  ;;
-       xscale) subdirs="$subdirs xscale"
- ;;
        xstormy16) subdirs="$subdirs xstormy16"
  ;;
        z8k) subdirs="$subdirs z8k"

diff --git a/newlib/libc/machine/configure.in b/newlib/libc/machine/configure.in
index 7cd9036..2492656 100644 (file)
--- a/newlib/libc/machine/configure.in
+++ b/newlib/libc/machine/configure.in
@@ -65,7 +65,6 @@ if test -n "${machine_dir}"; then
        w65) AC_CONFIG_SUBDIRS(w65) ;;
        x86_64) AC_CONFIG_SUBDIRS(x86_64) ;;
        xc16x) AC_CONFIG_SUBDIRS(xc16x) ;;
-       xscale) AC_CONFIG_SUBDIRS(xscale) ;;
        xstormy16) AC_CONFIG_SUBDIRS(xstormy16) ;;
        z8k) AC_CONFIG_SUBDIRS(z8k) ;;
   esac;