* aclocal.m4 (AC_FUNC_MMAP_ANYWHERE): Extend test to detect systems

        with MAP_ANONYMOUS and MAP_ANON.
        * configure, config.in: Rebuilt.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@34977 138bc75d-0d04-0410-961f-82ee72b054a4

diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index 16ba4b3..5d9b922 100644 (file)
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,3 +1,9 @@
+2000-07-11  J. David Anglin  <dave@hiauly1.hia.nrc.ca>
+
+       * aclocal.m4 (AC_FUNC_MMAP_ANYWHERE): Extend test to detect systems
+       with MAP_ANONYMOUS and MAP_ANON.
+       * configure, config.in: Rebuilt.
+
 2000-07-12  Gabriel Dos Reis  <gdr@codesourcery.com>
 
        * diagnostic.c (save_output_state): Remove.

diff --git a/gcc/aclocal.m4 b/gcc/aclocal.m4
index e17e277..cf53a36 100644 (file)
--- a/gcc/aclocal.m4
+++ b/gcc/aclocal.m4
@@ -684,19 +684,24 @@ fi
 AC_SUBST($1)dnl
 ])
 
-# Check whether mmap can map an arbitrary page from /dev/zero, without
-# MAP_FIXED.
+# Check whether mmap can map an arbitrary page from /dev/zero or with
+# MAP_ANONYMOUS, without MAP_FIXED.
 AC_DEFUN([AC_FUNC_MMAP_ANYWHERE],
 [AC_CHECK_HEADERS(unistd.h)
 AC_CHECK_FUNCS(getpagesize)
-AC_CACHE_CHECK(for working mmap from /dev/zero, ac_cv_func_mmap_anywhere,
+AC_CACHE_CHECK(for working mmap which provides zeroed pages anywhere,
+  ac_cv_func_mmap_anywhere,
 [AC_TRY_RUN([
 /* Test by Richard Henderson and Alexandre Oliva.
-   Check whether mmap from /dev/zero works. */
+   Check whether mmap MAP_ANONYMOUS or mmap from /dev/zero works. */
 #include <sys/types.h>
 #include <fcntl.h>
 #include <sys/mman.h>
 
+#if !defined (MAP_ANONYMOUS) && defined (MAP_ANON)
+# define MAP_ANONYMOUS MAP_ANON
+#endif
+
 /* This mess was copied from the GNU getpagesize.h.  */
 #ifndef HAVE_GETPAGESIZE
 # ifdef HAVE_UNISTD_H
@@ -743,12 +748,19 @@ int main()
   char *x;
   int fd, pg;
 
+#ifndef MAP_ANONYMOUS
   fd = open("/dev/zero", O_RDWR);
   if (fd < 0)
     exit(1);
+#endif
 
   pg = getpagesize();
+#ifdef MAP_ANONYMOUS
+  x = (char*)mmap(0, pg, PROT_READ|PROT_WRITE,
+                  MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+#else
   x = (char*)mmap(0, pg, PROT_READ|PROT_WRITE, MAP_PRIVATE, fd, 0);
+#endif
   if (x == (char *) -1)
     exit(2);
 
@@ -762,7 +774,7 @@ int main()
 ac_cv_func_mmap_anywhere=no)])
 if test $ac_cv_func_mmap_anywhere = yes; then
   AC_DEFINE(HAVE_MMAP_ANYWHERE, 1,
-           [Define if mmap can get us zeroed pages from /dev/zero.])
+           [Define if mmap can get us zeroed pages without MAP_FIXED.])
 fi
 ])
 

diff --git a/gcc/config.in b/gcc/config.in
index 6521a6e..582f93b 100644 (file)
--- a/gcc/config.in
+++ b/gcc/config.in
@@ -313,7 +313,7 @@
 /* Define if printf supports %p. */
 #undef HAVE_PRINTF_PTR
 
-/* Define if mmap can get us zeroed pages from /dev/zero. */
+/* Define if mmap can get us zeroed pages without MAP_FIXED. */
 #undef HAVE_MMAP_ANYWHERE
 
 /* Define if read-only mmap of a plain file works. */

diff --git a/gcc/configure b/gcc/configure
index 79c060d..f2d7fa8 100755 (executable)
--- a/gcc/configure
+++ b/gcc/configure
@@ -3050,8 +3050,8 @@ else
 fi
 done
 
-echo $ac_n "checking for working mmap from /dev/zero""... $ac_c" 1>&6
-echo "configure:3055: checking for working mmap from /dev/zero" >&5
+echo $ac_n "checking for working mmap which provides zeroed pages anywhere""... $ac_c" 1>&6
+echo "configure:3055: checking for working mmap which provides zeroed pages anywhere" >&5
 if eval "test \"`echo '$''{'ac_cv_func_mmap_anywhere'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3063,11 +3063,15 @@ else
 #include "confdefs.h"
 
 /* Test by Richard Henderson and Alexandre Oliva.
-   Check whether mmap from /dev/zero works. */
+   Check whether mmap MAP_ANONYMOUS or mmap from /dev/zero works. */
 #include <sys/types.h>
 #include <fcntl.h>
 #include <sys/mman.h>
 
+#if !defined (MAP_ANONYMOUS) && defined (MAP_ANON)
+# define MAP_ANONYMOUS MAP_ANON
+#endif
+
 /* This mess was copied from the GNU getpagesize.h.  */
 #ifndef HAVE_GETPAGESIZE
 # ifdef HAVE_UNISTD_H
@@ -3114,12 +3118,19 @@ int main()
   char *x;
   int fd, pg;
 
+#ifndef MAP_ANONYMOUS
   fd = open("/dev/zero", O_RDWR);
   if (fd < 0)
     exit(1);
+#endif
 
   pg = getpagesize();
+#ifdef MAP_ANONYMOUS
+  x = (char*)mmap(0, pg, PROT_READ|PROT_WRITE,
+                  MAP_PRIVATE | MAP_ANONYMOUS, -1, 0);
+#else
   x = (char*)mmap(0, pg, PROT_READ|PROT_WRITE, MAP_PRIVATE, fd, 0);
+#endif
   if (x == (char *) -1)
     exit(2);
 
@@ -3131,7 +3142,7 @@ int main()
   exit(0);
 }
 EOF
-if { (eval echo configure:3135: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3146: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_anywhere=yes
 else
@@ -3154,7 +3165,7 @@ EOF
 fi
 
 echo $ac_n "checking for working mmap of a file""... $ac_c" 1>&6
-echo "configure:3158: checking for working mmap of a file" >&5
+echo "configure:3169: checking for working mmap of a file" >&5
 if eval "test \"`echo '$''{'ac_cv_func_mmap_file'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3169,7 +3180,7 @@ if test "$cross_compiling" = yes; then
   ac_cv_func_mmap_file=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 3173 "configure"
+#line 3184 "configure"
 #include "confdefs.h"
 
 /* Test by Zack Weinberg.  Modified from MMAP_ANYWHERE test by
@@ -3206,7 +3217,7 @@ int main()
   exit(0);
 }
 EOF
-if { (eval echo configure:3210: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3221: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_file=yes
 else
@@ -3239,12 +3250,12 @@ for ac_func in bcopy bzero bcmp \
 do
   ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
 echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:3243: checking whether $ac_func is declared" >&5
+echo "configure:3254: checking whether $ac_func is declared" >&5
 if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3248 "configure"
+#line 3259 "configure"
 #include "confdefs.h"
 #include "gansidecl.h"
 #include "system.h"
@@ -3255,7 +3266,7 @@ char *(*pfn) = (char *(*)) $ac_func ;
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:3259: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3270: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   eval "gcc_cv_have_decl_$ac_func=yes"
 else
@@ -3360,12 +3371,12 @@ for ac_func in getrlimit setrlimit getrusage
 do
   ac_tr_decl=HAVE_DECL_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
 echo $ac_n "checking whether $ac_func is declared""... $ac_c" 1>&6
-echo "configure:3364: checking whether $ac_func is declared" >&5
+echo "configure:3375: checking whether $ac_func is declared" >&5
 if eval "test \"`echo '$''{'gcc_cv_have_decl_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3369 "configure"
+#line 3380 "configure"
 #include "confdefs.h"
 #include "gansidecl.h"
 #include "system.h"
@@ -3380,7 +3391,7 @@ char *(*pfn) = (char *(*)) $ac_func ;
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:3384: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3395: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   eval "gcc_cv_have_decl_$ac_func=yes"
 else
@@ -3423,12 +3434,12 @@ CFLAGS="$saved_CFLAGS"
 
 # mkdir takes a single argument on some systems. 
 echo $ac_n "checking if mkdir takes one argument""... $ac_c" 1>&6
-echo "configure:3427: checking if mkdir takes one argument" >&5
+echo "configure:3438: checking if mkdir takes one argument" >&5
 if eval "test \"`echo '$''{'gcc_cv_mkdir_takes_one_arg'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3432 "configure"
+#line 3443 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -3445,7 +3456,7 @@ int main() {
 mkdir ("foo", 0);
 ; return 0; }
 EOF
-if { (eval echo configure:3449: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3460: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_mkdir_takes_one_arg=no
 else
@@ -6930,7 +6941,7 @@ fi
 
 
         echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
-echo "configure:6934: checking for strerror in -lcposix" >&5
+echo "configure:6945: checking for strerror in -lcposix" >&5
 ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -6938,7 +6949,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lcposix  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 6942 "configure"
+#line 6953 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -6949,7 +6960,7 @@ int main() {
 strerror()
 ; return 0; }
 EOF
-if { (eval echo configure:6953: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6964: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -6972,12 +6983,12 @@ fi
   
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:6976: checking for working const" >&5
+echo "configure:6987: checking for working const" >&5
 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6981 "configure"
+#line 6992 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -7026,7 +7037,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:7030: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:7041: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -7047,12 +7058,12 @@ EOF
 fi
 
 echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:7051: checking for off_t" >&5
+echo "configure:7062: checking for off_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7056 "configure"
+#line 7067 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -7080,12 +7091,12 @@ EOF
 fi
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:7084: checking for size_t" >&5
+echo "configure:7095: checking for size_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7089 "configure"
+#line 7100 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -7115,19 +7126,19 @@ fi
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:7119: checking for working alloca.h" >&5
+echo "configure:7130: checking for working alloca.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7124 "configure"
+#line 7135 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:7131: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7142: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -7148,12 +7159,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:7152: checking for alloca" >&5
+echo "configure:7163: checking for alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7157 "configure"
+#line 7168 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -7181,7 +7192,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:7185: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7196: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -7213,12 +7224,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:7217: checking whether alloca needs Cray hooks" >&5
+echo "configure:7228: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7222 "configure"
+#line 7233 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -7243,12 +7254,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7247: checking for $ac_func" >&5
+echo "configure:7258: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7252 "configure"
+#line 7263 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -7271,7 +7282,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:7275: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7286: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -7298,7 +7309,7 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:7302: checking stack direction for C alloca" >&5
+echo "configure:7313: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7306,7 +7317,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 7310 "configure"
+#line 7321 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -7325,7 +7336,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:7329: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:7340: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -7352,17 +7363,17 @@ unistd.h sys/param.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:7356: checking for $ac_hdr" >&5
+echo "configure:7367: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7361 "configure"
+#line 7372 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7366: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7377: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -7392,12 +7403,12 @@ done
 strdup __argz_count __argz_stringify __argz_next
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7396: checking for $ac_func" >&5
+echo "configure:7407: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7401 "configure"
+#line 7412 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -7420,7 +7431,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:7424: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7435: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -7449,12 +7460,12 @@ done
      for ac_func in stpcpy
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7453: checking for $ac_func" >&5
+echo "configure:7464: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7458 "configure"
+#line 7469 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -7477,7 +7488,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:7481: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7492: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -7511,19 +7522,19 @@ EOF
 
    if test $ac_cv_header_locale_h = yes; then
     echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:7515: checking for LC_MESSAGES" >&5
+echo "configure:7526: checking for LC_MESSAGES" >&5
 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7520 "configure"
+#line 7531 "configure"
 #include "confdefs.h"
 #include <locale.h>
 int main() {
 return LC_MESSAGES
 ; return 0; }
 EOF
-if { (eval echo configure:7527: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7538: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_val_LC_MESSAGES=yes
 else
@@ -7544,7 +7555,7 @@ EOF
     fi
   fi
    echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:7548: checking whether NLS is requested" >&5
+echo "configure:7559: checking whether NLS is requested" >&5
         # Check whether --enable-nls or --disable-nls was given.
 if test "${enable_nls+set}" = set; then
   enableval="$enable_nls"
@@ -7564,7 +7575,7 @@ fi
 EOF
 
       echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:7568: checking whether included gettext is requested" >&5
+echo "configure:7579: checking whether included gettext is requested" >&5
       # Check whether --with-included-gettext or --without-included-gettext was given.
 if test "${with_included_gettext+set}" = set; then
   withval="$with_included_gettext"
@@ -7583,17 +7594,17 @@ fi
 
        ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:7587: checking for libintl.h" >&5
+echo "configure:7598: checking for libintl.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7592 "configure"
+#line 7603 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7597: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7608: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -7610,19 +7621,19 @@ fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:7614: checking for gettext in libc" >&5
+echo "configure:7625: checking for gettext in libc" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7619 "configure"
+#line 7630 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:7626: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7637: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libc=yes
 else
@@ -7638,7 +7649,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
 
           if test "$gt_cv_func_gettext_libc" != "yes"; then
             echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:7642: checking for bindtextdomain in -lintl" >&5
+echo "configure:7653: checking for bindtextdomain in -lintl" >&5
 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -7646,7 +7657,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 7650 "configure"
+#line 7661 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -7657,7 +7668,7 @@ int main() {
 bindtextdomain()
 ; return 0; }
 EOF
-if { (eval echo configure:7661: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7672: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -7673,12 +7684,12 @@ fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:7677: checking for gettext in libintl" >&5
+echo "configure:7688: checking for gettext in libintl" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo $ac_n "checking for gettext in -lintl""... $ac_c" 1>&6
-echo "configure:7682: checking for gettext in -lintl" >&5
+echo "configure:7693: checking for gettext in -lintl" >&5
 ac_lib_var=`echo intl'_'gettext | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -7686,7 +7697,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 7690 "configure"
+#line 7701 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -7697,7 +7708,7 @@ int main() {
 gettext()
 ; return 0; }
 EOF
-if { (eval echo configure:7701: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7712: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -7736,7 +7747,7 @@ EOF
              # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7740: checking for $ac_word" >&5
+echo "configure:7751: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7770,12 +7781,12 @@ fi
                for ac_func in dcgettext
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7774: checking for $ac_func" >&5
+echo "configure:7785: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7779 "configure"
+#line 7790 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -7798,7 +7809,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:7802: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7813: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -7825,7 +7836,7 @@ done
                # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7829: checking for $ac_word" >&5
+echo "configure:7840: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7861,7 +7872,7 @@ fi
                # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7865: checking for $ac_word" >&5
+echo "configure:7876: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7893,7 +7904,7 @@ else
 fi
 
                cat > conftest.$ac_ext <<EOF
-#line 7897 "configure"
+#line 7908 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -7901,7 +7912,7 @@ extern int _nl_msg_cat_cntr;
                               return _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:7905: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7916: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   CATOBJEXT=.gmo
                   DATADIRNAME=share
@@ -7924,7 +7935,7 @@ fi
 
         if test "$CATOBJEXT" = "NONE"; then
          echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6
-echo "configure:7928: checking whether catgets can be used" >&5
+echo "configure:7939: checking whether catgets can be used" >&5
          # Check whether --with-catgets or --without-catgets was given.
 if test "${with_catgets+set}" = set; then
   withval="$with_catgets"
@@ -7937,7 +7948,7 @@ fi
 
          if test "$nls_cv_use_catgets" = "yes"; then
                    echo $ac_n "checking for main in -li""... $ac_c" 1>&6
-echo "configure:7941: checking for main in -li" >&5
+echo "configure:7952: checking for main in -li" >&5
 ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -7945,14 +7956,14 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-li  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 7949 "configure"
+#line 7960 "configure"
 #include "confdefs.h"
 
 int main() {
 main()
 ; return 0; }
 EOF
-if { (eval echo configure:7956: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7967: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -7980,12 +7991,12 @@ else
 fi
 
            echo $ac_n "checking for catgets""... $ac_c" 1>&6
-echo "configure:7984: checking for catgets" >&5
+echo "configure:7995: checking for catgets" >&5
 if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7989 "configure"
+#line 8000 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char catgets(); below.  */
@@ -8008,7 +8019,7 @@ catgets();
 
 ; return 0; }
 EOF
-if { (eval echo configure:8012: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8023: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_catgets=yes"
 else
@@ -8030,7 +8041,7 @@ EOF
               # Extract the first word of "gencat", so it can be a program name with args.
 set dummy gencat; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8034: checking for $ac_word" >&5
+echo "configure:8045: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GENCAT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8066,7 +8077,7 @@ fi
                 # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8070: checking for $ac_word" >&5
+echo "configure:8081: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8103,7 +8114,7 @@ fi
                   # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8107: checking for $ac_word" >&5
+echo "configure:8118: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8142,7 +8153,7 @@ fi
                 # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8146: checking for $ac_word" >&5
+echo "configure:8157: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8200,7 +8211,7 @@ fi
         # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8204: checking for $ac_word" >&5
+echo "configure:8215: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8234,7 +8245,7 @@ fi
         # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8238: checking for $ac_word" >&5
+echo "configure:8249: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8274,7 +8285,7 @@ fi
         # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8278: checking for $ac_word" >&5
+echo "configure:8289: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8369,7 +8380,7 @@ fi
        LINGUAS=
      else
        echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:8373: checking for catalogs to be installed" >&5
+echo "configure:8384: checking for catalogs to be installed" >&5
        if test "x$LINGUAS" = "x"; then
         LINGUAS=$ALL_LINGUAS
        else
@@ -8401,17 +8412,17 @@ echo "configure:8373: checking for catalogs to be installed" >&5
    if test "$CATOBJEXT" = ".cat"; then
      ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:8405: checking for linux/version.h" >&5
+echo "configure:8416: checking for linux/version.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 8410 "configure"
+#line 8421 "configure"
 #include "confdefs.h"
 #include <linux/version.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8415: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8426: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -8486,7 +8497,7 @@ fi
 
 
 echo $ac_n "checking whether windows registry support is requested""... $ac_c" 1>&6
-echo "configure:8490: checking whether windows registry support is requested" >&5
+echo "configure:8501: checking whether windows registry support is requested" >&5
 if test x$enable_win32_registry != xno; then
   cat >> confdefs.h <<\EOF
 #define ENABLE_WIN32_REGISTRY 1
@@ -8515,7 +8526,7 @@ esac
 
 if test x$enable_win32_registry != xno; then
   echo $ac_n "checking registry key on windows hosts""... $ac_c" 1>&6
-echo "configure:8519: checking registry key on windows hosts" >&5
+echo "configure:8530: checking registry key on windows hosts" >&5
   cat >> confdefs.h <<EOF
 #define WIN32_REGISTRY_KEY "$gcc_cv_win32_registry_key"
 EOF
@@ -8709,7 +8720,7 @@ fi
 
 # Figure out what assembler alignment features are present.
 echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:8713: checking assembler alignment features" >&5
+echo "configure:8724: checking assembler alignment features" >&5
 gcc_cv_as=
 gcc_cv_as_alignment_features=
 gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gas
@@ -8830,7 +8841,7 @@ fi
 echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
 
 echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
-echo "configure:8834: checking assembler subsection support" >&5
+echo "configure:8845: checking assembler subsection support" >&5
 gcc_cv_as_subsections=
 if test x$gcc_cv_as != x; then
        # Check if we have .subsection
@@ -8870,7 +8881,7 @@ fi
 echo "$ac_t""$gcc_cv_as_subsections" 1>&6
 
 echo $ac_n "checking assembler weak support""... $ac_c" 1>&6
-echo "configure:8874: checking assembler weak support" >&5
+echo "configure:8885: checking assembler weak support" >&5
 gcc_cv_as_weak=
 if test x$gcc_cv_as != x; then
        # Check if we have .weak
@@ -8887,7 +8898,7 @@ fi
 echo "$ac_t""$gcc_cv_as_weak" 1>&6
 
 echo $ac_n "checking assembler hidden support""... $ac_c" 1>&6
-echo "configure:8891: checking assembler hidden support" >&5
+echo "configure:8902: checking assembler hidden support" >&5
 gcc_cv_as_hidden=
 if test x$gcc_cv_as != x; then
        # Check if we have .hidden
@@ -8907,7 +8918,7 @@ echo "$ac_t""$gcc_cv_as_hidden" 1>&6
 case "$target" in 
   sparc*-*-*)
     echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6
-echo "configure:8911: checking assembler .register pseudo-op support" >&5
+echo "configure:8922: checking assembler .register pseudo-op support" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_register_pseudo_op'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8935,7 +8946,7 @@ EOF
     fi
 
     echo $ac_n "checking assembler supports -relax""... $ac_c" 1>&6
-echo "configure:8939: checking assembler supports -relax" >&5
+echo "configure:8950: checking assembler supports -relax" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_relax_opt'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8965,7 +8976,7 @@ EOF
     case "$tm_file" in
     *64*)
        echo $ac_n "checking for 64 bit support in assembler ($gcc_cv_as)""... $ac_c" 1>&6
-echo "configure:8969: checking for 64 bit support in assembler ($gcc_cv_as)" >&5
+echo "configure:8980: checking for 64 bit support in assembler ($gcc_cv_as)" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_flags64'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9010,7 +9021,7 @@ EOF
 
     if test "x$gcc_cv_as_flags64" != xno; then
        echo $ac_n "checking for assembler offsetable %lo() support""... $ac_c" 1>&6
-echo "configure:9014: checking for assembler offsetable %lo() support" >&5
+echo "configure:9025: checking for assembler offsetable %lo() support" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_offsetable_lo10'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -9049,7 +9060,7 @@ EOF
 
   i[34567]86-*-*)
     echo $ac_n "checking assembler instructions""... $ac_c" 1>&6
-echo "configure:9053: checking assembler instructions" >&5
+echo "configure:9064: checking assembler instructions" >&5
     gcc_cv_as_instructions=
     if test x$gcc_cv_as != x; then
        set "filds fists" "filds mem; fists mem"
@@ -9179,7 +9190,7 @@ fi
 
 # Build a new-libstdc++ system (ie libstdc++-v3)
 echo $ac_n "checking for libstdc++ to install""... $ac_c" 1>&6
-echo "configure:9183: checking for libstdc++ to install" >&5
+echo "configure:9194: checking for libstdc++ to install" >&5
 # Check whether --enable-libstdcxx-v3 or --disable-libstdcxx-v3 was given.
 if test "${enable_libstdcxx_v3+set}" = set; then
   enableval="$enable_libstdcxx_v3"
@@ -9203,7 +9214,7 @@ EOF
 
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:9207: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:9218: checking whether to enable maintainer-specific portions of Makefiles" >&5
     # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"