+Sat Jun 13 03:46:40 1998 Craig Burley <burley@gnu.org>
+
+ * Makefile.in (install): Don't install if $(libsubdir)
+ is empty; issue a diagnostic saying top-level Makefile
+ must pass it in instead, and exit.
+
+ * Makefile.in (g2c.h): Rename from f2c.h.
+
+ * Makefile.in, libF77/Makefile.in, libI77/Makefile.in,
+ libU77/Makefile.in: Rewrite config and var assignment
+ sections to be even more minimal than before, and to
+ more clearly documented what macros are expected to be
+ set and to what sorts of values. Eliminate CROSS and
+ related stuff, since there's no such things as CROSS
+ in egcs. Rename GCC_FOR_TARGET to CC throughout.
+ * Makefile.in (stamp-libi77, stamp-libf77, stamp-libu77):
+ Eliminate CROSS.
+ * configure.in: Eliminate CROSS.
+
+ Rename libf2c.a and f2c.h to libg2c.a and g2c.h,
+ normalize and simplify g77/libg2c build process:
+ * Makefile.in: Remove all stuff pertaining to
+ installation, cleaning, and so on. Parent Makefile
+ does all that now. Pass F2C_H_DIR,
+ G2C_H_DIR, and GCC_H_DIR, the pathnames for the
+ directories containing f2c.h, g2c.h, and other
+ #include files, to subdirectory Makefiles.
+ (stamp-libf77, stamp-libi77, stamp-libu77):
+ Don't specify `-f Makefile' anymore, it's not needed
+ now that subdirectory makefile's from netlib are
+ renamed to makefile.netlib in g77 source (and to
+ makefile.ori by configuration process, in case they're
+ still around somehow).
+ (stamp-libe77): Don't make libE77 dir unless it doesn't
+ exist, if it does just delete all objects in it.
+ Compile using $(GCC_FOR_TARGET), not $(CC).
+ (rebuilt): Remove this and all subordinate targets,
+ as parent Makefile now handles all that.
+ (*clean): Remove.
+ * configure.in (Pad_UDread, ALWAYS_FLUSH, WANT_LEAD_0):
+ Remove these and commentary to new f2c.h file.
+ AC_OUTPUT g2c.h instead of f2c.h. Remove old commentary
+ regarding concatenation.
+ * g2c.h.in: Rename from f2c.h.in, add appropriate
+ commentary.
+ * f2c.h: New file, a wrapper for g2c.h that does
+ libg2c-specific stuff.
+ * libF77/Makefile.in, libI77/Makefile.in, libU77/Makefile.in:
+ Change $(ALL_CFLAGS) to use F2C_H_DIR, G2C_H_DIR, and GCC_H_DIR
+ macros. Remove F2C_H macro, replace use with explicit
+ dependencies on f2c.h and g2c.h.
+ (*clean): Remove.
+
1998-05-20 Dave Love <d.love@dl.ac.uk>
* Makefile.in ($(lib)): Use shell loop instead of unportable
# overrides thouh $(MAKE)) but may be needed by older versions.'
FLAGS_TO_PASS= \
- "SHELL=$(SHELL)" \
- "INSTALL=$(INSTALL)" \
- "INSTALL_DATA=$(INSTALL_DATA)" \
- "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \
- "prefix=$(prefix)" \
- "exec_prefix=$(exec_prefix)" \
- "tooldir=$(tooldir)" \
- "AR=$(AR)" \
- "AR_FLAGS=$(AR_FLAGS)" \
"CC=$(CC)" \
"CFLAGS=$(CFLAGS)" \
- "RANLIB=$(RANLIB)" \
+ "F2C_H_DIR=$(s)/libf2c" \
+ "G2C_H_DIR=$(r)/libraries/libf2c" \
+ "GCC_H_DIR=$(s)/include" \
"LIBCFLAGS=$(LIBCFLAGS)" \
"PICFLAG=$(PICFLAG)" \
"RUNTESTFLAGS=$(RUNTESTFLAGS)"
-
-lib = libf2c.a
+LIBG2C = libg2c.a
MISC = libF77/F77_aloc.o libF77/VersionF.o libF77/main.o libF77/s_rnge.o \
libF77/abort_.o libF77/getarg_.o libF77/iargc_.o libF77/getenv_.o \
secnds second sleep srand stat symlnk sclock time ttynam umask unlink \
vxtidt vxttim alarm
-all: f2c.h $(lib)
+all: g2c.h $(LIBG2C)
-$(lib): stamp-libf77 stamp-libi77 stamp-libu77 stamp-libe77
- rm -f $(lib)
- $(AR) $(AR_FLAGS) $(lib) $(FOBJ)
- $(AR) $(AR_FLAGS) $(lib) $(IOBJ)
- $(AR) $(AR_FLAGS) $(lib) $(UOBJ)
+$(LIBG2C): stamp-libf77 stamp-libi77 stamp-libu77 stamp-libe77
+ rm -f $(LIBG2C)
+ $(AR) $(AR_FLAGS) $(LIBG2C) $(FOBJ)
+ $(AR) $(AR_FLAGS) $(LIBG2C) $(IOBJ)
+ $(AR) $(AR_FLAGS) $(LIBG2C) $(UOBJ)
objs=""; for i in $(F2CEXT); do objs="$$objs libE77/L$$i.o"; done; \
- $(AR) $(AR_FLAGS) $(lib) $$objs
- $(RANLIB) $(lib)
+ $(AR) $(AR_FLAGS) $(LIBG2C) $$objs
+ $(RANLIB) $(LIBG2C)
stamp-libi77: libI77/Makefile
rm -f stamp-libi77
- cd libI77; $(MAKE) -f Makefile $(FLAGS_TO_PASS) all
+ cd libI77; $(MAKE) $(FLAGS_TO_PASS) all
touch stamp-libi77
stamp-libf77: libF77/Makefile
rm -f stamp-libf77
- cd libF77; $(MAKE) -f Makefile $(FLAGS_TO_PASS) all
+ cd libF77; $(MAKE) $(FLAGS_TO_PASS) all
touch stamp-libf77
stamp-libu77: libU77/Makefile
rm -f stamp-libu77
- cd libU77; $(MAKE) -f Makefile $(FLAGS_TO_PASS) all
+ cd libU77; $(MAKE) $(FLAGS_TO_PASS) all
touch stamp-libu77
stamp-libe77: $(srcdir)/f2cext.c
- rm -fr libE77
- mkdir libE77
+ rm -f stamp-libe77
+ if [ -d libE77 ]; then rm -f libE77/*.o; else mkdir libE77; fi
for name in $(F2CEXT); \
do \
echo $${name}; \
$(CC) -c -I. -I$(srcdir) -I../../include $(CPPFLAGS) $(CFLAGS) \
- $(CGFLAGS) -DL$${name} $(srcdir)/f2cext.c \
+ -DL$${name} $(srcdir)/f2cext.c \
-o libE77/L$${name}.o; \
if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
done
touch stamp-libe77
${srcdir}/configure: ${srcdir}/configure.in
- rm -f config.cache && cd ${srcdir} && autoconf && rm -f config.cache
+ rm -f config.cache Makefile g2c.h \
+ && cd $(srcdir) && autoconf && rm -f config.cache
${srcdir}/libU77/configure: ${srcdir}/libU77/configure.in
- rm -f libU77/config.cache && cd ${srcdir}/libU77 && autoconf && rm -f config.cache
-f2c.h Makefile: $(srcdir)/Makefile.in config.status
+ rm -f libU77/config.cache libU77/Makefile && \
+ cd $(srcdir)/libU77 && autoconf && rm -f config.cache
+g2c.h Makefile: $(srcdir)/g2c.h.in $(srcdir)/Makefile.in config.status
$(SHELL) config.status
config.status: $(srcdir)/configure
$(SHELL) config.status --recheck
-f2c.h: $(srcdir)/f2c.h.in
-
info install-info clean-info dvi:
check:
cd libU77; $(MAKE) G77DIR=../../../gcc/ check
install:
- $(INSTALL_DATA) $(lib) $(libdir)/$(lib).n
- ( cd $(libdir) ; $(RANLIB) $(lib).n )
- mv -f $(libdir)/$(lib).n $(libdir)/$(lib)
- $(INSTALL_DATA) f2c.h $(includedir)/f2c.h
+ @if [ x$(libsubdir) = x ]; then \
+ echo ''; \
+ echo 'libf2c error: libsubdir environment variable is not'; \
+ echo ' exported by top-level Makefile. libg2c.a and g2c.h'; \
+ echo ' are installed in the directory tree identified named'; \
+ echo ' by that variable, the same tree in which the gcc-'; \
+ echo ' specific executables, libraries, and so on are installed.'; \
+ echo ' Rather than try to extract the name of this tree via'; \
+ echo ' a kludge, libf2c/Makefile.in simply assumes it is passed'; \
+ echo ' in as an environment variable. Someone needs to make'; \
+ echo ' the appropriate changes to the top-level Makefile.in for'; \
+ echo ' this to happen.'; \
+ echo ''; \
+ echo ' In the meantime, you can try setting libsubdir explicitly'; \
+ echo ' in the make command line via libsubdir=/foo/lib/gcc-lib/...,'; \
+ echo ' where foo and ... indicate wherever the cc1 and f771'; \
+ echo ' executables were installed as part of this overall'; \
+ echo ' installation process.'; \
+ echo ''; \
+ exit 1; \
+ fi
+ $(INSTALL_DATA) $(LIBG2C) $(libsubdir)/$(LIBG2C).n
+ ( cd $(libsubdir) ; $(RANLIB) $(LIBG2C).n )
+ mv -f $(libsubdir)/$(LIBG2C).n $(libsubdir)/$(LIBG2C)
+ $(INSTALL_DATA) g2c.h $(libsubdir)/include/g2c.h
+ @if [ -f f2c-install-ok -o -f $(srcdir)/f2c-install-ok ]; then \
+ echo ''; \
+ echo 'Warning: g77 no longer installs libf2c.a or f2c.h.'; \
+ echo ' You must do so yourself. For more information,'; \
+ echo ' read "Distributing Binaries" in the g77 docs.'; \
+ echo ' (To turn off this warning, delete the file'; \
+ echo ' f2c-install-ok in the source or build directory.)'; \
+ echo ''; \
+ fi
mostlyclean:
- -rm -f stamp-*
- for i in libI77 libF77 libU77; do \
- if [ -f $$i/Makefile ]; then \
- cd $$i; $(MAKE) -f Makefile mostlyclean; cd ..; \
- fi; \
- done
+ rm -f stamp-* $(LIBG2C)
+ rm -f libF77/*.o
+ rm -f libI77/*.o
+ rm -f libU77/*.o
rm -fr libE77
clean:
- -rm -f config.log stamp-*
- for i in libI77 libF77 libU77; do \
- if [ -f $$i/Makefile ]; then \
- cd $$i; $(MAKE) -f Makefile clean; cd ..; \
- fi; \
- done
- rm -fr libE77
-
-distclean: clean
- -rm -f Makefile config.cache lib?77/Makefile config.status lib?77/config.status lib?77/config.cache lib?77/config.h f2c.h
-
-maintainer-clean: distclean
- -rm -f $(srcdir)/configure $(srcdir)/libU77/configure
+ rm -f config.log
+ rm -f libF77/Makefile
+ rm -f libI77/Makefile
+ rm -f libU77/Makefile libU77/config.log libU77/a.out
+
+distclean:
+ rm -f Makefile config.cache config.status g2c.h
+ rm -f lib?77/Makefile lib?77/config.status
+ rm -f lib?77/config.cache lib?77/config.h
+
+maintainer-clean:
+ rm -f $(srcdir)/configure $(srcdir)/libU77/configure
rebuilt: ${srcdir}/configure ${srcdir}/libU77/configure
-970811
+1998-04-20
This directory contains the f2c library packaged for use with g77 to configure
and build automatically (in principle!) as part of the top-level configure and
make steps. This depends on the makefile and configure fragments in ../f.
+g77 names this library `libg2c' to avoid conflict with existing copies
+of `libf2c' on a system.
Some small changes have been made to the f2c distributions of lib[FI]77 which
come from <ftp:bell-labs.com/netlib/f2c/> and are maintained (excellently) by
configure and build libf2c in g77's distribution.
The packaging for auto-configuration was done by Dave Love <d.love@dl.ac.uk>.
-Minor changes have been made by James Craig Burley <burley@gnu.ai.mit.edu>,
+Minor changes have been made by James Craig Burley <burley@gnu.org>,
who probably broke things Dave had working. :-)
Among the user-visible changes (choices) g77 makes in its
-# From configure.in 1.10
+# From configure.in 1.11
-if test "$CROSS";then
- if test "$CC_FOR_TARGET"; then
- CC="$CC_FOR_TARGET"
- else
- CC="../../xgcc -B../../xgcc/"
- fi
- ac_cv_c_cross=yes
-else
- # For g77 we'll set CC to point at the built gcc, but this will get it into
- # the makefiles
- # Extract the first word of "gcc", so it can be a program name with args.
+# For g77 we'll set CC to point at the built gcc, but this will get it into
+# the makefiles
+# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:539: checking for $ac_word" >&5
+echo "configure:531: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:568: checking for $ac_word" >&5
+echo "configure:560: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:616: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:608: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 626 "configure"
+#line 618 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:630: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:622: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:650: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:642: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:655: checking whether we are using GNU C" >&5
+echo "configure:647: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:664: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:656: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:679: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:671: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test "${CFLAGS+set}" = set || CFLAGS="-g"
fi
- ac_cv_c_cross=no
-fi
test "$AR" || AR=ar
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:721: checking for $ac_word" >&5
+echo "configure:711: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Sanity check for the cross-compilation case:
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:754: checking how to run the C preprocessor" >&5
+echo "configure:744: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 769 "configure"
+#line 759 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:775: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:765: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 786 "configure"
+#line 776 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:792: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:782: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
:
ac_safe=`echo "stdio.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for stdio.h""... $ac_c" 1>&6
-echo "configure:816: checking for stdio.h" >&5
+echo "configure:806: checking for stdio.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 821 "configure"
+#line 811 "configure"
#include "confdefs.h"
#include <stdio.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:826: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:816: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:854: checking for ANSI C header files" >&5
+echo "configure:844: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 859 "configure"
+#line 849 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:867: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:857: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 884 "configure"
+#line 874 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 902 "configure"
+#line 892 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 923 "configure"
+#line 913 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:934: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:924: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
:
else
echo $ac_n "checking for posix""... $ac_c" 1>&6
-echo "configure:960: checking for posix" >&5
+echo "configure:950: checking for posix" >&5
if eval "test \"`echo '$''{'g77_cv_header_posix'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 965 "configure"
+#line 955 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <unistd.h>
# We can rely on the GNU library being posix-ish. I guess checking the
# header isn't actually like checking the functions, though...
echo $ac_n "checking for GNU library""... $ac_c" 1>&6
-echo "configure:991: checking for GNU library" >&5
+echo "configure:981: checking for GNU library" >&5
if eval "test \"`echo '$''{'g77_cv_lib_gnu'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 996 "configure"
+#line 986 "configure"
#include "confdefs.h"
#include <stdio.h>
#ifdef __GNU_LIBRARY__
# Apparently cygwin needs to be special-cased.
echo $ac_n "checking for cyg\`win'32""... $ac_c" 1>&6
-echo "configure:1020: checking for cyg\`win'32" >&5
+echo "configure:1010: checking for cyg\`win'32" >&5
if eval "test \"`echo '$''{'g77_cv_sys_cygwin32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1025 "configure"
+#line 1015 "configure"
#include "confdefs.h"
#ifdef __CYGWIN32__
yes
# ditto for mingw32.
echo $ac_n "checking for mingw32""... $ac_c" 1>&6
-echo "configure:1048: checking for mingw32" >&5
+echo "configure:1038: checking for mingw32" >&5
if eval "test \"`echo '$''{'g77_cv_sys_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1053 "configure"
+#line 1043 "configure"
#include "confdefs.h"
#ifdef __MINGW32__
yes
ac_safe=`echo "fcntl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for fcntl.h""... $ac_c" 1>&6
-echo "configure:1077: checking for fcntl.h" >&5
+echo "configure:1067: checking for fcntl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1082 "configure"
+#line 1072 "configure"
#include "confdefs.h"
#include <fcntl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1087: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1077: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:1120: checking for working const" >&5
+echo "configure:1110: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1125 "configure"
+#line 1115 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:1174: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1164: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:1195: checking for size_t" >&5
+echo "configure:1185: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1200 "configure"
+#line 1190 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:1229: checking return type of signal handlers" >&5
+echo "configure:1219: checking return type of signal handlers" >&5
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1234 "configure"
+#line 1224 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
int i;
; return 0; }
EOF
-if { (eval echo configure:1251: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1241: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_signal=void
else
# we'll get atexit by default
if test $ac_cv_header_stdc != yes; then
echo $ac_n "checking for atexit""... $ac_c" 1>&6
-echo "configure:1272: checking for atexit" >&5
+echo "configure:1262: checking for atexit" >&5
if eval "test \"`echo '$''{'ac_cv_func_atexit'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1277 "configure"
+#line 1267 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char atexit(); below. */
; return 0; }
EOF
-if { (eval echo configure:1300: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1290: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_atexit=yes"
else
EOF
echo $ac_n "checking for onexit""... $ac_c" 1>&6
-echo "configure:1325: checking for onexit" >&5
+echo "configure:1315: checking for onexit" >&5
if eval "test \"`echo '$''{'ac_cv_func_onexit'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1330 "configure"
+#line 1320 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char onexit(); below. */
; return 0; }
EOF
-if { (eval echo configure:1353: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1343: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_onexit=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for on_exit""... $ac_c" 1>&6
-echo "configure:1371: checking for on_exit" >&5
+echo "configure:1361: checking for on_exit" >&5
if eval "test \"`echo '$''{'ac_cv_func_on_exit'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1376 "configure"
+#line 1366 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char on_exit(); below. */
; return 0; }
EOF
-if { (eval echo configure:1399: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1389: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_on_exit=yes"
else
# Apparently positive result on cygwin loses re. NON_UNIX_STDIO
# (as of cygwin b18). Likewise on mingw.
echo $ac_n "checking for fstat""... $ac_c" 1>&6
-echo "configure:1432: checking for fstat" >&5
+echo "configure:1422: checking for fstat" >&5
if eval "test \"`echo '$''{'ac_cv_func_fstat'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1437 "configure"
+#line 1427 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char fstat(); below. */
; return 0; }
EOF
-if { (eval echo configure:1460: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1450: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_fstat=yes"
else
fi
echo $ac_n "checking need for NON_UNIX_STDIO""... $ac_c" 1>&6
-echo "configure:1480: checking need for NON_UNIX_STDIO" >&5
+echo "configure:1470: checking need for NON_UNIX_STDIO" >&5
if test $g77_cv_sys_cygwin32 = yes \
|| test $g77_cv_sys_mingw32 = yes \
|| test $ac_cv_func_fstat = no; then
# This is necessary for e.g. Linux:
echo $ac_n "checking for necessary members of struct FILE""... $ac_c" 1>&6
-echo "configure:1495: checking for necessary members of struct FILE" >&5
+echo "configure:1485: checking for necessary members of struct FILE" >&5
if eval "test \"`echo '$''{'g77_cv_struct_FILE'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1500 "configure"
+#line 1490 "configure"
#include "confdefs.h"
#include <stdio.h>
int main() {
FILE s; s._ptr; s._base; s._flag;
; return 0; }
EOF
-if { (eval echo configure:1507: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1497: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
g77_cv_struct_FILE=yes
else
fi
echo $ac_n "checking for drem in -lm""... $ac_c" 1>&6
-echo "configure:1527: checking for drem in -lm" >&5
+echo "configure:1517: checking for drem in -lm" >&5
ac_lib_var=`echo m'_'drem | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 1535 "configure"
+#line 1525 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
drem()
; return 0; }
EOF
-if { (eval echo configure:1546: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1536: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in tempnam
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1574: checking for $ac_func" >&5
+echo "configure:1564: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1579 "configure"
+#line 1569 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1602: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1592: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# However, on my sunos4/gcc setup unistd.h leads us wrongly to believe
# we're posix-conformant, so always do the test.
echo $ac_n "checking for ansi/posix sprintf result""... $ac_c" 1>&6
-echo "configure:1632: checking for ansi/posix sprintf result" >&5
+echo "configure:1622: checking for ansi/posix sprintf result" >&5
if test "$cross_compiling" = yes; then
g77_cv_sys_sprintf_ansi=no
else
cat > conftest.$ac_ext <<EOF
-#line 1637 "configure"
+#line 1627 "configure"
#include "confdefs.h"
#include <stdio.h>
/* does sprintf return the number of chars transferred? */
main () {char foo[2]; (sprintf(foo, "1") == 1) ? exit(0) : exit(1);}
EOF
-if { (eval echo configure:1644: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1634: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
then
g77_cv_sys_sprintf_ansi=yes
else
g77_cv_sys_sprintf_ansi=$g77_cv_sys_sprintf_ansi
fi
-if test $ac_cv_c_cross = no; then
- echo "$ac_t""$g77_cv_sys_sprintf_ansi" 1>&6
-else
- echo "$ac_t""can't tell -- assuming no" 1>&6
-fi
+echo "$ac_t""$g77_cv_sys_sprintf_ansi" 1>&6
+
# The cygwin patch takes steps to avoid defining USE_STRLEN here -- I don't
# understand why.
if test $g77_cv_sys_sprintf_ansi != yes; then
# define NON_ANSI_RW_MODES on unix (can't hurt)
echo $ac_n "checking NON_ANSI_RW_MODES""... $ac_c" 1>&6
-echo "configure:1678: checking NON_ANSI_RW_MODES" >&5
+echo "configure:1665: checking NON_ANSI_RW_MODES" >&5
cat > conftest.$ac_ext <<EOF
-#line 1680 "configure"
+#line 1667 "configure"
#include "confdefs.h"
#ifdef unix
yes
# (via com.h). proj.h and com.h are in $srcdir/.., config.h which they need
# is in ../.. and the config files are in $srcdir/../../config.
echo $ac_n "checking f2c integer type""... $ac_c" 1>&6
-echo "configure:1721: checking f2c integer type" >&5
+echo "configure:1708: checking f2c integer type" >&5
late_ac_cpp=$ac_cpp
ac_cpp="$late_ac_cpp -I../../gcc/f -I../../gcc -I../../gcc/config"
if test "$subdir" != . ; then
if eval "test \"`echo '$''{'g77_cv_sys_f2cinteger'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- echo "configure:1730: using $ac_cpp" >&5
+ echo "configure:1717: using $ac_cpp" >&5
cat > conftest.$ac_ext <<EOF
-#line 1732 "configure"
+#line 1719 "configure"
#include "confdefs.h"
#include "proj.h"
#define FFECOM_DETERMINE_TYPES 1
rm -f conftest*
if test "$g77_cv_sys_f2cinteger" = ""; then
-echo "configure:1754: using $ac_cpp" >&5
+echo "configure:1741: using $ac_cpp" >&5
cat > conftest.$ac_ext <<EOF
-#line 1756 "configure"
+#line 1743 "configure"
#include "confdefs.h"
#include "proj.h"
#define FFECOM_DETERMINE_TYPES 1
echo $ac_n "checking f2c long int type""... $ac_c" 1>&6
-echo "configure:1791: checking f2c long int type" >&5
+echo "configure:1778: checking f2c long int type" >&5
late_ac_cpp=$ac_cpp
ac_cpp="$late_ac_cpp -I../../gcc/f -I../../gcc -I../../gcc/config"
if test "$subdir" != . ; then
if eval "test \"`echo '$''{'g77_cv_sys_f2clongint'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- echo "configure:1800: using $ac_cpp" >&5
+ echo "configure:1787: using $ac_cpp" >&5
cat > conftest.$ac_ext <<EOF
-#line 1802 "configure"
+#line 1789 "configure"
#include "confdefs.h"
#include "proj.h"
#define FFECOM_DETERMINE_TYPES 1
rm -f conftest*
if test "$g77_cv_sys_f2clongint" = ""; then
-echo "configure:1824: using $ac_cpp" >&5
+echo "configure:1811: using $ac_cpp" >&5
cat > conftest.$ac_ext <<EOF
-#line 1826 "configure"
+#line 1813 "configure"
#include "confdefs.h"
#include "proj.h"
#define FFECOM_DETERMINE_TYPES 1
-
-
-
# This EOF_CHAR is a misfeature on unix.
cat >> confdefs.h <<\EOF
#define NO_EOF_CHAR_CHECK 1
EOF
-
-
-
-cat >> confdefs.h <<\EOF
-#define Pad_UDread 1
-EOF
-
-
-
-
-
-cat >> confdefs.h <<\EOF
-#define WANT_LEAD_0 1
-EOF
-
-
# avoid confusion in case the `makefile's from the f2c distribution have
# got put here
test -f libF77/makefile && mv libF77/makefile libF77/makefile.ori
ac_given_srcdir=$srcdir
-trap 'rm -fr `echo "Makefile f2c.h libI77/Makefile libF77/Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "Makefile g2c.h libI77/Makefile libF77/Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
s%@CPP@%$CPP%g
s%@F2C_INTEGER@%$F2C_INTEGER%g
s%@F2C_LONGINT@%$F2C_LONGINT%g
-s%@CROSS@%$CROSS%g
s%@subdirs@%$subdirs%g
CEOF
cat >> $CONFIG_STATUS <<EOF
-CONFIG_FILES=\${CONFIG_FILES-"Makefile f2c.h libI77/Makefile libF77/Makefile"}
+CONFIG_FILES=\${CONFIG_FILES-"Makefile g2c.h libI77/Makefile libF77/Makefile"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
AC_INIT(libF77/Version.c)
-AC_REVISION(1.10)
+AC_REVISION(1.11)
-dnl AC_C_CROSS
-dnl Gives misleading `(cached)' message from the check.
-if test "$CROSS";then
- if test "$CC_FOR_TARGET"; then
- CC="$CC_FOR_TARGET"
- else
- CC="../../xgcc -B../../xgcc/"
- fi
- ac_cv_c_cross=yes
-else
- dnl Checks for programs.
- # For g77 we'll set CC to point at the built gcc, but this will get it into
- # the makefiles
- AC_PROG_CC
- ac_cv_c_cross=no
-fi
+dnl Checks for programs.
+# For g77 we'll set CC to point at the built gcc, but this will get it into
+# the makefiles
+AC_PROG_CC
dnl These should be inherited in the recursive make, but ensure they are
dnl defined:
AC_CACHE_VAL(g77_cv_sys_sprintf_ansi,
g77_cv_sys_sprintf_ansi=$g77_cv_sys_sprintf_ansi)
dnl We get a misleading `(cached)' message...
-if test $ac_cv_c_cross = no; then
- AC_MSG_RESULT($g77_cv_sys_sprintf_ansi)
-else
- AC_MSG_RESULT([can't tell -- assuming no])
-fi
+AC_MSG_RESULT($g77_cv_sys_sprintf_ansi)
+
# The cygwin patch takes steps to avoid defining USE_STRLEN here -- I don't
# understand why.
if test $g77_cv_sys_sprintf_ansi != yes; then
dnl maybe check for drem/remainder
-AC_SUBST(CROSS)
-
-
# This EOF_CHAR is a misfeature on unix.
AC_DEFINE(NO_EOF_CHAR_CHECK)
AC_DEFINE(Skip_f2c_Undefs)
-dnl Craig had these in f2c.h, but they're only relevant for building libf2c
-dnl anyway.
-
-dnl For GNU Fortran (g77), we always enable the following behaviors for
-dnl libf2c, to make things easy on the programmer. The alternate
-dnl behaviors have their uses, and g77 might provide them as compiler,
-dnl rather than library, options, so only a single copy of a shared libf2c
-dnl need be built for a system.
-
-dnl This makes unformatted I/O more consistent in relation to other
-dnl systems. It is not required by the F77 standard.
-
-AC_DEFINE(Pad_UDread)
-
-dnl This makes ERR= and IOSTAT= returns work properly in disk-full
-dnl situations, making things work more as expected. It slows things
-dnl down, so g77 will probably someday choose the original implementation
-dnl on a case-by-case basis when it can be shown to not be necessary
-dnl (e.g. no ERR= or IOSTAT=) or when it is given the appropriate
-dnl compile-time option or, perhaps, source-code directive.
-
-dnl AC_DEFINE(ALWAYS_FLUSH)
-
-dnl Most Fortran implementations do this, so to make it easier
-dnl to compare the output of g77-compiled programs to those compiled
-dnl by most other compilers, tell libf2c to put leading zeros in
-dnl appropriate places on output
-
-AC_DEFINE(WANT_LEAD_0)
-
# avoid confusion in case the `makefile's from the f2c distribution have
# got put here
test -f libF77/makefile && mv libF77/makefile libF77/makefile.ori
test -f libU77/makefile && mv libU77/makefile libU77/makefile.ori
AC_CONFIG_SUBDIRS(libU77)
-AC_OUTPUT(Makefile f2c.h libI77/Makefile libF77/Makefile)
+AC_OUTPUT(Makefile g2c.h libI77/Makefile libF77/Makefile)
dnl We might have configuration options to:
-dnl * allow non-standard string concatenation (use libF77 s_catow.o,
-dnl not s_cat.o)
dnl * change unit preconnexion in libI77/err.c (f_init.c)
dnl * -DALWAYS_FLUSH in libI77
dnl * -DOMIT_BLANK_CC in libI77
--- /dev/null
+/* f2c.h file for GNU Fortran run-time library
+ Copyright (C) 1998 Free Software Foundation, Inc.
+ Contributed by James Craig Burley (burley@gnu.org).
+
+This file is part of GNU Fortran.
+
+GNU Fortran is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+GNU Fortran is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU Fortran; see the file COPYING. If not, write to
+the Free Software Foundation, 59 Temple Place - Suite 330,
+Boston, MA 02111-1307, USA. */
+
+/* This file currently is just a stub through which g77's copy
+ of netlib's libf2c, which g77 builds and installs as libg2c.a
+ (to avoid conflict), #include's g77's version of f2c.h, named
+ g2c.h. That file is, in turn, produced via g77's library
+ configuration process from g2c.h.in.
+
+ By going through this extra "hoop", it is easy to provide for
+ libg2c-specific configuration and typedefs that aren't appropriate
+ in g2c.h itself (since that is intended to be installed so it can
+ be shared with f2c users), without changing the libf2c (libg2c)
+ routines themselves. (They continue to #include "f2c.h", just
+ like they do in netlib's version.) */
+
+#include "g2c.h"
+
+/* For GNU Fortran (g77), we always enable the following behaviors for
+ libf2c, to make things easy on the programmer. The alternate
+ behaviors have their uses, and g77 might provide them as compiler,
+ rather than library, options, so only a single copy of a shared libf2c
+ need be built for a system. */
+
+/* This makes unformatted I/O more consistent in relation to other
+ systems. It is not required by the F77 standard. */
+
+#define Pad_UDread
+
+/* This makes ERR= and IOSTAT= returns work properly in disk-full
+ situations, making things work more as expected. It slows things
+ down, so g77 will probably someday choose the original implementation
+ on a case-by-case basis when it can be shown to not be necessary
+ (e.g. no ERR= or IOSTAT=) or when it is given the appropriate
+ compile-time option or, perhaps, source-code directive.
+
+ (No longer defined, since it really slows down NFS access too much.) */
+
+/* #define ALWAYS_FLUSH */
+
+/* Most Fortran implementations do this, so to make it easier
+ to compare the output of g77-compiled programs to those compiled
+ by most other compilers, tell libf2c to put leading zeros in
+ appropriate places on output. */
+
+#define WANT_LEAD_0
-/* f2c.h -- Standard Fortran to C header file */
+/* g2c.h -- g77 version of f2c (Standard Fortran to C header file) */
+
+/* This file is generated by the g77 libg2c configuration process from a
+ file named g2c.h.in. This process sets up the appropriate types,
+ defines the appropriate macros, and so on. The resulting g2c.h file
+ is used to build g77's copy of libf2c, named libg2c, and also can
+ be used when compiling C code produced by f2c to link the resulting
+ object file(s) with those produced by the same version of g77 that
+ produced this file, allowing inter-operability of f2c-compiled and
+ g77-compiled code. */
/** barf [ba:rf] 2. "He suggested using FORTRAN, and everybody barfed."
# Makefile for GNU F77 compiler runtime.
# Copyright 1990 - 1994 by AT&T Bell Laboratories and Bellcore (see the
# file `Notice').
-# Portions of this file Copyright (C) 1995, 1996 Free Software Foundation, Inc.
+# Portions of this file Copyright (C) 1995-1998 Free Software Foundation, Inc.
# Contributed by Dave Love (d.love@dl.ac.uk).
#
#This file is part of GNU Fortran.
#the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA
#02111-1307, USA.
-SHELL = /bin/sh
+#### Start of system configuration section. ####
+
+# $(srcdir) must be set to the g77 runtime libF77 source directory
+# (g77/f/runtime/libF77).
srcdir = @srcdir@
VPATH = @srcdir@
-#### Start of system configuration section. ####
+# gcc/f/runtime/configure sets this to all the -D options appropriate
+# for the configuration.
+DEFS = @DEFS@
+
+#### End of system configuration section. ####
+
+# Must be passed in explicitly. Sample values are shown below.
+#CC = /gcc-build-dir/xgcc -B/gcc-build-dir/
+#CFLAGS = -O -g
+#CPPFLAGS =
+#F2C_H_DIR = /gcc-source-dir/f/runtime
+#G2C_H_DIR = /gcc-build-dir/f/runtime
+#GCC_H_DIR = /gcc-build-dir/include
+ALL_CFLAGS = -I. -I$(srcdir) -I$(G2C_H_DIR) -I$(F2C_H_DIR) -I$(GCC_H_DIR) $(CPPFLAGS) $(DEFS) $(CFLAGS)
+
+.SUFFIXES:
+.SUFFIXES: .c .o
.c.o:
- $(CC) -c -DSkip_f2c_Undefs -I../ $(CFLAGS) $<
+ $(CC) -c -DSkip_f2c_Undefs $(ALL_CFLAGS) $<
MISC = F77_aloc.o VersionF.o main.o s_rnge.o abort_.o getarg_.o iargc_.o\
getenv_.o signal_.o s_stop.o s_paus.o system_.o cabs.o\
CHAR = s_cat.o s_cmp.o s_copy.o
F90BIT = lbitbits.o lbitshft.o qbitbits.o qbitshft.o
-F2C_H = ../f2c.h
-
all: $(MISC) $(POW) $(CX) $(DCX) $(REAL) $(DBL) $(INT) \
$(HALF) $(CMP) $(EFL) $(CHAR) $(F90BIT)
VersionF.o: Version.c
- $(CC) -c $(CFLAGS) -o $@ $(srcdir)/Version.c
-
-mostlyclean clean:
- -rm -f *.o
-
-distclean maintainer-clean: clean
- -rm -f stage? include Makefile
+ $(CC) -c $(ALL_CFLAGS) -o $@ $(srcdir)/Version.c
# Not quite all these actually do depend on f2c.h...
-$(MISC) $(POW) $(CX) $(DCX) $(REAL) $(DBL) $(INT) \
- $(HALF) $(CMP) $(EFL) $(CHAR) $(F90BIT): $(F2C_H)
+$(MISC) $(POW) $(CX) $(DCX) $(REAL) $(DBL) $(INT) $(HALF) $(CMP) $(EFL) \
+ $(CHAR) $(F90BIT): $(F2C_H_DIR)/f2c.h $(G2C_H_DIR)/g2c.h
-.PHONY: mostlyclean clean distclean maintainer-clean all
+.PHONY: all
# Makefile for GNU F77 compiler runtime.
# Copyright 1990 - 1994 by AT&T Bell Laboratories and Bellcore (see the
# file `Notice').
-# Portions of this file Copyright (C) 1995, 1996 Free Software Foundation, Inc.
+# Portions of this file Copyright (C) 1995, 1996, 1998 Free Software Foundation, Inc.
# Contributed by Dave Love (d.love@dl.ac.uk).
#
#This file is part of GNU Fortran.
#the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA
#02111-1307, USA.
-SHELL = /bin/sh
+#### Start of system configuration section. ####
+
+# $(srcdir) must be set to the g77 runtime libF77 source directory
+# (g77/f/runtime/libF77).
srcdir = @srcdir@
VPATH = @srcdir@
-#### Start of system configuration section. ####
-
-CPPFLAGS = @CPPFLAGS@
+# gcc/f/runtime/configure sets this to all the -D options appropriate
+# for the configuration.
DEFS = @DEFS@
-# f2c.h should already be installed in xgcc's include directory but add that
-# to -I anyhow in case not using xgcc.
-ALL_CFLAGS = -I. -I$(srcdir) -I.. $(CPPFLAGS) $(DEFS) $(CFLAGS)
-CROSS = @CROSS@
+
+#### End of system configuration section. ####
+
+# Must be passed in explicitly. Sample values are shown below.
+#CC = /gcc-build-dir/xgcc -B/gcc-build-dir/
+#CFLAGS = -O -g
+#CPPFLAGS =
+#F2C_H_DIR = /gcc-source-dir/f/runtime
+#G2C_H_DIR = /gcc-build-dir/f/runtime
+#GCC_H_DIR = /gcc-build-dir/include
+
+ALL_CFLAGS = -I. -I$(srcdir) -I$(G2C_H_DIR) -I$(F2C_H_DIR) -I$(GCC_H_DIR) $(CPPFLAGS) $(DEFS) $(CFLAGS)
.SUFFIXES:
.SUFFIXES: .c .o
util.o wref.o wrtfmt.o wsfe.o wsle.o wsne.o xwsne.o \
ftell_.o
-F2C_H = ../f2c.h
-
all: $(OBJ)
VersionI.o: Version.c
- $(CC) -c $(CGFLAGS) -o $@ $(srcdir)/Version.c
-
-mostlyclean clean:
- -rm -f $(OBJ)
-
-distclean maintainer-clean: mostlyclean
- -rm -f stage? include Makefile
+ $(CC) -c $(ALL_CFLAGS) -o $@ $(srcdir)/Version.c
backspace.o: fio.h
close.o: fio.h
xwsne.o: fmt.h
# May be pessimistic:
-$(OBJ): $(F2C_H)
+$(OBJ): $(F2C_H_DIR)/f2c.h $(G2C_H_DIR)/g2c.h
-.PHONY: mostlyclean clean distclean maintainer-clean all
+.PHONY: all
# Makefile for GNU F77 compiler runtime, libc interface.
-# Copyright (C) 1995-1997 Free Software Foundation, Inc.
+# Copyright (C) 1995-1998 Free Software Foundation, Inc.
# Contributed by Dave Love (d.love@dl.ac.uk).
#
-#This file is part of GNU Fortran libU77 library.
+#This file is part of the GNU Fortran libU77 library.
#
-#This library is free software; you can redistribute it and/or modify
-#it under the terms of the GNU Library General Public License as
-#published by the Free Software Foundation; either version 2, or (at
-#your option) any later version.
+#The GNU Fortran libU77 library is free software; you can redistribute
+#it and/or modify it under the terms of the GNU Library General Public
+#License as published by the Free Software Foundation; either version 2,
+#or (at your option) any later version.
#
-#GNU Fortran is distributed in the hope that it will be useful, but
-#WITHOUT ANY WARRANTY; without even the implied warranty of
-#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-#Library General Public License for more details.
+#GNU Fortran is distributed in the hope that it will be useful,
+#but WITHOUT ANY WARRANTY; without even the implied warranty of
+#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+#GNU Library General Public License for more details.
#
#You should have received a copy of the GNU General Public License
#along with GNU Fortran; see the file COPYING. If not, write to
-#Software Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+#the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA
+#02111-1307, USA.
-SHELL = /bin/sh
+#### Start of system configuration section. ####
+
+# $(srcdir) must be set to the g77 runtime libF77 source directory
+# (g77/f/runtime/libF77).
srcdir = @srcdir@
VPATH = @srcdir@
-#### Start of system configuration section. ####
-
-CPPFLAGS = @CPPFLAGS@
+# gcc/f/runtime/configure sets this to all the -D options appropriate
+# for the configuration.
DEFS = @DEFS@
-# f2c.h should already be installed in xgcc's include directory but add that
-# to -I anyhow in case not using xgcc. fio.h is in libI77. We need config.h
-# from `.'.
-ALL_CFLAGS = -I. -I$(srcdir) -I$(srcdir)/../libI77 -I.. $(CPPFLAGS) $(DEFS) $(CFLAGS)
-CROSS = @CROSS@
+
+#### End of system configuration section. ####
+
+# Must be passed in explicitly. Sample values are shown below.
+#CC = /gcc-build-dir/xgcc -B/gcc-build-dir/
+#CFLAGS = -O -g
+#CPPFLAGS =
+#F2C_H_DIR = /gcc-source-dir/f/runtime
+#G2C_H_DIR = /gcc-build-dir/f/runtime
+#GCC_H_DIR = /gcc-build-dir/include
+
+# fio.h is in libI77. config.h is in `.'.
+ALL_CFLAGS = -I. -I$(srcdir) -I$(G2C_H_DIR)/libI77 -I$(F2C_H_DIR)/libI77 -I$(G2C_H_DIR) -I$(F2C_H_DIR) -I$(GCC_H_DIR) $(CPPFLAGS) $(DEFS) $(CFLAGS)
+
+# This could probably be done more elegantly, but it's currently
+# just for running the u77-test test.
+G77DIR = ../../../
.SUFFIXES:
.SUFFIXES: .c .o
umask_.c sys_clock_.c date_.c second_.c flush1_.c mclock_.c \
alarm_.c
-F2C_H = ../f2c.h
-
all: $(OBJS)
VersionU.o: Version.c
- $(CC) -c $(CGFLAGS) -o $@ $(srcdir)/Version.c
-
-lint:
- lint $(CFLAGS) $(SRCS)
-
-mostlyclean:
- -rm -f $(OBJS)
-
-clean: mostlyclean
- -rm -f config.log a.out
-
-distclean realclean maintainer-clean: clean
- -rm -f config.h Makefile config.status config.cache stage? include
-
-$(OBJS): $(F2C_H) config.h
-
-check:
- -$(G77DIR)g77 -B$(G77DIR) -L.. -g $(srcdir)/u77-test.f $(lib) && ./a.out
- rm -f a.out
+ $(CC) -c $(ALL_CFLAGS) -o $@ $(srcdir)/Version.c
+$(OBJS): $(F2C_H_DIR)/f2c.h $(G2C_H_DIR)/g2c.h config.h
access_.o: access_.c
ctime_.o: ctime_.c
dtime_.o: dtime_.c
etime_.o: etime_.c
-fnum_.o: fnum_.c $(srcdir)/../libI77/fio.h
+fnum_.o: fnum_.c $(F2C_H_DIR)/libI77/fio.h
fstat_.o: fstat_.c
gerror_.o: gerror_.c
getcwd_.o: getcwd_.c
idate_.o: idate_.c
ierrno_.o: ierrno_.c
irand_.o: irand_.c
-isatty_.o: isatty_.c $(srcdir)/../libI77/fio.h
+isatty_.o: isatty_.c $(F2C_H_DIR)/libI77/fio.h
itime_.o: itime_.c
kill_.o: kill_.c
link_.o: link_.c
mclock_.o: mclock_.c
alarm_.o: alarm_.c
-.PHONY: mostlyclean clean distclean maintainer-clean lint check all
+lint:
+ lint $(ALL_CFLAGS) $(SRCS)
+
+check:
+ -$(G77DIR)g77 -B$(G77DIR) -L.. -g $(srcdir)/u77-test.f $(lib) && ./a.out
+ rm -f a.out
+
+.PHONY: lint check all
OSDN Git Service
