+2007-04-02 Eric Christopher <echristo@apple.com>
+
+ * doc/invoke.texi (i386 and x86-64 Options): Document -m64
+ limitations on darwin.
+
2007-04-02 Anatoly Sokolov <aesok@post.ru>
PR target/31137
2007-04-02 Dave Korn <dave.korn@artimi.com>
* doc/tm.texi (FUNCTION_MODE): Update and extend documentation.
-
+
2007-04-02 Dave Korn <dave.korn@artimi.com>
* libgcc2.h (exception_descriptor): Don't forward-declare.
PR 14737
* doc/invoke.texi: (optimization options): Reword description
of -ffast-math. Document its primary purpose.
-
+
2007-03-31 Richard Guenther <rguenther@suse.de>
* omp-low.c (splay-tree.h): Include.
2007-03-31 Anatoly Sokolov <aesok@post.ru>
- * config/avr/predicates.md (even_register_operand,
+ * config/avr/predicates.md (even_register_operand,
odd_register_operand): New predicates.
* config/avr/avr.md (movw peephole2): New.
(movw_r peephole2): New.
2007-03-30 Anatoly Sokolov <aesok@post.ru>
- * config/avr/avr.c (avr_override_options): Clear
+ * config/avr/avr.c (avr_override_options): Clear
'flag_delete_null_pointer_checks'.
2007-03-30 Paolo Carlini <pcarlini@suse.de>
2007-03-30 Jan Hubicka <jh@suse.cz>
PR middle-end/PR30700
- * dwarf2out.c (reference_to_unused): Ask cgraph for functions
+ * dwarf2out.c (reference_to_unused): Ask cgraph for functions
availablility; add more sanity checking; ask varpool only about
VAR_DECL.
than calling gen_rtx_SET directly. Use r0 to hold the value of
'address + 4' rather than a stack based temporary which can be
mis-optimized away.
-
+
2007-03-29 Andreas Krebbel <krebbel1@de.ibm.com>
* config/s390/s390.c (s390_secondary_input_reload_class,
* config.gcc: Accept barcelona as a variant of amdfam10.
* config/i386/i386.c (override_options): Likewise.
* doc/invoke.texi: Likewise.
-
+
2007-03-28 Eric Botcazou <ebotcazou@adacore.com>
* tree-dfa.c (get_ref_base_and_extent): Do not expect positive
2007-03-28 Lars Poeschel <larsi@wh2.tu-dresden.de>
* config/fr30/fr30.md (movsi_internal): Change destination
- constraint from m to V and add m to the end.
+ constraint from m to V and add m to the end.
2007-03-28 Christian Bruel <christian.bruel@st.com>
* config/s390/s390.md ("fix_trunc<mode>di2"): New expander.
("fix_trunc<DFP:mode>di2_dfp"): New insn definition renamed from
fix_trunc<mode>di2.
- ("fixuns_truncdddi2", "fixuns_trunctddi2"): Use
+ ("fixuns_truncdddi2", "fixuns_trunctddi2"): Use
fix_trunc<DFP:mode>di2_dfp instead of fix_trunc<mode>di2.
("fix_truncdfsi2", "fix_truncsfsi2", "fixuns_truncdddi2",
"fixuns_trunctddi2"): Whitespace fix.
2007-03-27 Anatoly Sokolov <aesok@post.ru>
- * config/avr/avr.c (avr_mcu_types): Move at90usb82 device to 'avr4'
+ * config/avr/avr.c (avr_mcu_types): Move at90usb82 device to 'avr4'
architecture.
2007-03-27 Janis Johnson <janis187@us.ibm.com>
2007-03-27 Richard Guenther <rguenther@suse.de>
* tree-dfa.c (get_ref_base_and_extent): Replace bit_offset and
- computations with it with a HOST_WIDE_INT variable.
+ computations with it with a HOST_WIDE_INT variable.
2007-03-26 Mike Stump <mrs@apple.com>
_mm_srli_epi64): Mark __B const.
(_mm_srli_si128, _mm_srli_si128): Fix disabled inline versions.
(_mm_sll_epi16, _mm_sll_epi32, _mm_sll_epi64, _mm_sra_epi16,
- _mm_sra_epi32, _mm_srl_epi16, _mm_srl_epi32, _mm_srl_epi64): Use
+ _mm_sra_epi32, _mm_srl_epi16, _mm_srl_epi32, _mm_srl_epi64): Use
new two-vector shift builtins.
2007-03-26 Ian Lance Taylor <iant@google.com>
the directories are searched in the order specified.
Many options have long names starting with @samp{-f} or with
-@samp{-W}---for example,
+@samp{-W}---for example,
@option{-fmove-loop-invariants}, @option{-Wformat} and so on. Most of
these have both positive and negative forms; the negative form of
@option{-ffoo} would be @option{-fno-foo}. This manual documents
@item Overall Options
@xref{Overall Options,,Options Controlling the Kind of Output}.
@gccoptlist{-c -S -E -o @var{file} -combine -pipe -pass-exit-codes @gol
--x @var{language} -v -### --help@r{[}=@var{class}@r{]} --target-help @gol
+-x @var{language} -v -### --help@r{[}=@var{class}@r{]} --target-help @gol
--version @@@var{file}}
@item C Language Options
@gccoptlist{-mel -mel @gol
-mmac @gol
-mscore5u -mscore7}
-
+
@emph{SH Options}
@gccoptlist{-m1 -m2 -m2e -m3 -m3e @gol
-m4-nofpu -m4-single-only -m4-single -m4 @gol
values of objects take effect. Programs whose behavior depends on this
have undefined behavior; the C and C++ standards specify that ``Between
the previous and next sequence point an object shall have its stored
-value modified at most once by the evaluation of an expression.
+value modified at most once by the evaluation of an expression.
Furthermore, the prior value shall be read only to determine the value
to be stored.''. If a program breaks these rules, the results on any
particular implementation are entirely unpredictable.
@item -Wc++0x-compat @r{(C++ and Objective-C++ only)}
Warn about C++ constructs whose meaning differs between ISO C++ 1998 and
-ISO C++ 200x, e.g., identifiers in ISO C++ 1998 that will become keywords
+ISO C++ 200x, e.g., identifiers in ISO C++ 1998 that will become keywords
in ISO C++ 200x. This warning is enabled by @option{-Wall}.
@item -Wcast-qual
@item sink
@opindex fdump-tree-sink
Dump each function after performing code sinking. The file name is made
-by appending @file{.sink} to the source file name.
+by appending @file{.sink} to the source file name.
@item dom
@opindex fdump-tree-dom
@item -ftree-vectorizer-verbose=@var{n}
@opindex ftree-vectorizer-verbose
This option controls the amount of debugging output the vectorizer prints.
-This information is written to standard error, unless
-@option{-fdump-tree-all} or @option{-fdump-tree-vect} is specified,
+This information is written to standard error, unless
+@option{-fdump-tree-all} or @option{-fdump-tree-vect} is specified,
in which case it is output to the usual dump listing file, @file{.vect}.
For @var{n}=0 no diagnostic information is reported.
-If @var{n}=1 the vectorizer reports each loop that got vectorized,
+If @var{n}=1 the vectorizer reports each loop that got vectorized,
and the total number of loops that got vectorized.
-If @var{n}=2 the vectorizer also reports non-vectorized loops that passed
-the first analysis phase (vect_analyze_loop_form) - i.e. countable,
-inner-most, single-bb, single-entry/exit loops. This is the same verbosity
+If @var{n}=2 the vectorizer also reports non-vectorized loops that passed
+the first analysis phase (vect_analyze_loop_form) - i.e. countable,
+inner-most, single-bb, single-entry/exit loops. This is the same verbosity
level that @option{-fdump-tree-vect-stats} uses.
-Higher verbosity levels mean either more information dumped for each
+Higher verbosity levels mean either more information dumped for each
reported loop, or same amount of information reported for more loops:
If @var{n}=3, alignment related information is added to the reports.
-If @var{n}=4, data-references related information (e.g. memory dependences,
+If @var{n}=4, data-references related information (e.g. memory dependences,
memory access-patterns) is added to the reports.
-If @var{n}=5, the vectorizer reports also non-vectorized inner-most loops
-that did not pass the first analysis phase (i.e. may not be countable, or
+If @var{n}=5, the vectorizer reports also non-vectorized inner-most loops
+that did not pass the first analysis phase (i.e. may not be countable, or
may have complicated control-flow).
If @var{n}=6, the vectorizer reports also non-vectorized nested loops.
-For @var{n}=7, all the information the vectorizer generates during its
+For @var{n}=7, all the information the vectorizer generates during its
analysis and transformation is reported. This is the same verbosity level
that @option{-fdump-tree-vect-details} uses.
needed when performing complex division. The default is
@option{-fno-cx-limited-range}, but is enabled by @option{-ffast-math}.
-This option controls the default setting of the ISO C99
+This option controls the default setting of the ISO C99
@code{CX_LIMITED_RANGE} pragma. Nevertheless, the option applies to
all languages.
@opindex funroll-loops
Unroll loops whose number of iterations can be determined at compile time or
upon entry to the loop. @option{-funroll-loops} implies
-@option{-frerun-cse-after-loop}, @option{-fweb} and @option{-frename-registers}.
+@option{-frerun-cse-after-loop}, @option{-fweb} and @option{-frename-registers}.
It also turns on complete loop peeling (i.e.@: complete removal of loops with
small constant number of iterations). This option makes code larger, and may
or may not make it run faster.
@table @gcctabopt
@item salias-max-implicit-fields
The maximum number of fields in a variable without direct
-structure accesses for which structure aliasing will consider trying
+structure accesses for which structure aliasing will consider trying
to track each field. The default is 5
@item salias-max-array-elements
abstraction penalty. The default value is 16.
@item min-vect-loop-bound
-The minimum number of iterations under which a loop will not get vectorized
-when @option{-ftree-vectorize} is used. The number of iterations after
+The minimum number of iterations under which a loop will not get vectorized
+when @option{-ftree-vectorize} is used. The number of iterations after
vectorization needs to be greater than the value specified by this option
to allow vectorization. The default value is 0.
Use @var{dir} as the logical root directory for headers and libraries.
For example, if the compiler would normally search for headers in
@file{/usr/include} and libraries in @file{/usr/lib}, it will instead
-search @file{@var{dir}/usr/include} and @file{@var{dir}/usr/lib}.
+search @file{@var{dir}/usr/include} and @file{@var{dir}/usr/lib}.
If you use both this option and the @option{-isysroot} option, then
the @option{--sysroot} option will apply to libraries, but the
arm-elf}, meaning to compile for an arm processor with elf binaries,
then you would specify @option{-b arm-elf} to run that cross compiler.
Because there are other options beginning with @option{-b}, the
-configuration must contain a hyphen.
+configuration must contain a hyphen.
@item -V @var{version}
@opindex V
@code{10.2}, and @code{10.3.9}.
The default for this option is to make choices that seem to be most
-useful.
+useful.
@item -mkernel
@opindex mkernel
The 32-bit environment sets int, long and pointer to 32 bits and
generates code that runs on any i386 system.
The 64-bit environment sets int to 32 bits and long and pointer
-to 64 bits and generates code for AMD's x86-64 architecture.
+to 64 bits and generates code for AMD's x86-64 architecture. For
+darwin only the -m64 option turns off the @option{-fno-pic} and
+@option{-mdynamic-no-pic} options.
@item -mno-red-zone
@opindex no-red-zone
@item -mcmodel=large
@opindex mcmodel=large
Generate code for the large model: This model makes no assumptions
-about addresses and sizes of sections.
+about addresses and sizes of sections.
@end table
@node IA-64 Options
@item -mno-sched-control-ldc
@itemx -msched-control-ldc
@opindex -mno-sched-control-ldc
-@opindex -msched-control-ldc
+@opindex -msched-control-ldc
(Dis/En)able use of ld.c instructions to check control speculative loads.
If enabled, in case of control speculative load with no speculatively
scheduled dependent instructions this load will be emitted as ld.sa and
@table @gcctabopt
@item -mel
@opindex -mel
-Compile code for little endian mode.
+Compile code for little endian mode.
@item -meb
@opindex meb
@item -mmac
@opindex mmac
-Enable the use of multiply-accumulate instructions. Disabled by default.
+Enable the use of multiply-accumulate instructions. Disabled by default.
@item -mscore5u
@opindex mscore5u
alternate directory name. Thus, with @option{-Bfoo/}, GCC will search
@file{foo/bar} where it would normally search @file{/usr/local/lib/bar}.
These alternate directories are searched first; the standard directories
-come next. If a standard directory begins with the configured
-@var{prefix} then the value of @var{prefix} is replaced by
+come next. If a standard directory begins with the configured
+@var{prefix} then the value of @var{prefix} is replaced by
@env{GCC_EXEC_PREFIX} when looking for header files.
@item COMPILER_PATH
OSDN Git Service
