* config.gcc: Set STMP_FIXPROTO and FIXPROTO_DEFINES in target

	makefile frag, not host makefile frag.
	(m88k-dg-dguxbcs*): Add m88k/t-dgux to tmake_file.
	(hppa*): Add pa/t-bsd to tmake_file where no special xmake_file is
	used.
        (hppa*-*-openbsd*): Don't use nonexitent pa/t-openbsd.
	* config/m88k/t-dguxbcs: Remove definitions already in t-dgux.
	* config/m88k/t-dgux (STMP_FIXPROTO): Define.
	* config/i386/t-cygwin (STMP_FIXPROTO): Define.
	* config/i386/t-dgux (STMP_FIXPROTO): Define.
	* config/x-interix: Don't define STMP_FIXPROTO and
	FIXPROTO_DEFINES.
	* config/t-interix: New file, define STMP_FIXPROTO.
	* config/i386/x-beos (STMP_FIXPROTO): Don't define here.
	* config/i386/t-beos (STMP_FIXPROTO): Define here instead.
	* config/t-svr4 (FIXPROTO_DEFINES): Define.
	* config/arm/t-riscix (FIXPROTO_DEFINES): Define.
	* config/i386/t-sco5 (FIXPROTO_DEFINES): Define.
	* config/i386/t-sco5gas (FIXPROTO_DEFINES): Define.
	* config/m68k/t-hp3200: Renamed from x-hp3200.
	* config/i370/t-oe: Renamed from x-oe.
	* config/mips/t-iris: Renamed from x-iris.
	* config/pa/t-bsd: Renamed from x-pa.
	* config/pa/t-pa-hpux: Renamed from x-pa-hpux.
	* config/x-linux, config/i386/x-cygwin, config/i386/x-dgux,
	config/m88k/x-dgux, config/x-svr4, config/arm/x-riscix,
	config/i386/x-sco5, config/m68k/x-hp320g, config/mips/x-iris6,
	config/rs6000/x-cygwin: Remove files.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@47052 138bc75d-0d04-0410-961f-82ee72b054a4

diff --git a/gcc/config.gcc b/gcc/config.gcc
index de4031c..0a8ab63 100644 (file)
--- a/gcc/config.gcc
+++ b/gcc/config.gcc
@@ -283,7 +283,6 @@ case $machine in
        gnu_ld=yes
        gas=yes
        # These details are the same as for Linux.
-       xmake_file=x-linux
        # But here we need a little extra magic.
        tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
        case $machine in
@@ -426,8 +425,7 @@ alpha-*-interix)
 
        xm_defines=POSIX
        xm_file="alpha/xm-alpha-interix.h xm-interix.h"
-       xmake_file=x-interix
-       tmake_file="alpha/t-alpha alpha/t-interix alpha/t-ieee"
+       tmake_file="alpha/t-alpha t-interix alpha/t-interix alpha/t-ieee"
        if test x$enable_threads = xyes ; then
                thread_file='posix'
        fi
@@ -567,7 +565,6 @@ arm-*-riscix*)                      # Acorn RISC machine
        else
            tm_file=arm/riscix.h
        fi
-       xmake_file=arm/x-riscix
        tmake_file=arm/t-riscix
        use_collect2=yes
        ;;
@@ -585,7 +582,6 @@ arm*-*-netbsd*)
        use_collect2=yes
        ;;
 arm*-*-linux*)                 # ARM GNU/Linux with ELF
-       xmake_file=x-linux
        tm_file="elfos.h arm/unknown-elf.h arm/elf.h arm/linux-gas.h arm/linux-elf.h"
        tmake_file="t-slibgcc-elf-ver t-linux arm/t-linux"
        extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
@@ -740,47 +736,51 @@ hppa*-*-linux* | parisc*-*-linux*)
        ;;
 hppa*-*-openbsd*)
        target_cpu_default="MASK_PA_11"
-       tmake_file=pa/t-openbsd
+       tmake_file=pa/t-bsd
        ;;
 hppa1.1-*-pro*)
        target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT)"
        tm_file="${tm_file} pa/pa32-regs.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h"
-       tmake_file=pa/t-pro
+       tmake_file="pa/t-bsd pa/t-pro"
        ;;
 hppa1.1-*-osf*)
        target_cpu_default="MASK_PA_11"
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-osf.h"
+       tmake_file="pa/t-bsd pa/t-pa"
        use_collect2=yes
        ;;
 hppa1.1-*-rtems*)
        target_cpu_default="(MASK_JUMP_IN_DELAY | MASK_PORTABLE_RUNTIME | MASK_GAS | MASK_NO_SPACE_REGS | MASK_SOFT_FLOAT)"
        tm_file="${tm_file} pa/pa32-regs.h elfos.h pa/elf.h pa/pa-pro-end.h libgloss.h pa/rtems.h"
-       tmake_file=pa/t-pro
+       tmake_file="pa/t-bsd pa/t-pro"
        ;;
 hppa1.0-*-osf*)
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-osf.h"
+       tmake_file="pa/t-bsd pa/t-pa"
        use_collect2=yes
        ;;
 hppa1.1-*-bsd*)
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h"
        target_cpu_default="MASK_PA_11"
+       tmake_file="pa/t-bsd pa/t-pa"
        use_collect2=yes
        ;;
 hppa1.0-*-bsd*)
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h"
+       tmake_file="pa/t-bsd pa/t-pa"
        use_collect2=yes
        ;;
 hppa1.0-*-hpux7*)
        tm_file="pa/pa-oldas.h ${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux7.h"
        xm_defines=POSIX
-       xmake_file=pa/x-pa-hpux
+       tmake_file=pa/t-pa-hpux
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
 hppa1.0-*-hpux8.0[0-2]*)
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h"
        xm_defines=POSIX
-       xmake_file=pa/x-pa-hpux
+       tmake_file=pa/t-pa-hpux
        if test x$gas != xyes
        then
                tm_file="pa/pa-oldas.h ${tm_file}"
@@ -792,7 +792,7 @@ hppa1.1-*-hpux8.0[0-2]*)
        target_cpu_default="MASK_PA_11"
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h"
        xm_defines=POSIX
-       xmake_file=pa/x-pa-hpux
+       tmake_file=pa/t-pa-hpux
        if test x$gas != xyes
        then
                tm_file="pa/pa-oldas.h ${tm_file}"
@@ -804,14 +804,14 @@ hppa1.1-*-hpux8*)
        target_cpu_default="MASK_PA_11"
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h"
        xm_defines=POSIX
-       xmake_file=pa/x-pa-hpux
+       tmake_file=pa/t-pa-hpux
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
 hppa1.0-*-hpux8*)
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h"
        xm_defines=POSIX
-       xmake_file=pa/x-pa-hpux
+       tmake_file=pa/t-pa-hpux
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
@@ -820,8 +820,7 @@ hppa1.1-*-hpux10* | hppa2*-*-hpux10*)
        tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
        float_format=i128
        xm_defines=POSIX
-       xmake_file=pa/x-pa-hpux
-       tmake_file=pa/t-pa
+       tmake_file="pa/t-pa pa/t-pa-hpux"
        if test x$enable_threads = x; then
            enable_threads=$have_pthread_h
        fi
@@ -837,8 +836,7 @@ hppa1.0-*-hpux10*)
        tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux10.h"
        float_format=i128
        xm_defines=POSIX
-       xmake_file=pa/x-pa-hpux
-       tmake_file=pa/t-pa
+       tmake_file="pa/t-pa pa/t-pa-hpux"
        if test x$enable_threads = x; then
            enable_threads=$have_pthread_h
        fi
@@ -852,8 +850,7 @@ hppa1.0-*-hpux10*)
        ;;
 hppa*64*-*-hpux11*)
        xm_defines=POSIX
-       xmake_file=pa/x-pa-hpux
-       tmake_file=pa/t-pa
+       tmake_file="pa/t-pa pa/t-pa-hpux"
        tm_file="pa/pa64-start.h ${tm_file} pa/pa64-regs.h pa/long_double.h pa/elf.h pa/pa-hpux.h pa/pa-hpux11.h pa/pa-64.h pa/pa64-hpux.h"
        float_format=i128
        tmake_file=pa/t-pa64
@@ -874,8 +871,7 @@ hppa1.1-*-hpux11* | hppa2*-*-hpux11*)
        tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
        float_format=i128
        xm_defines=POSIX
-       xmake_file=pa/x-pa-hpux
-       tmake_file=pa/t-pa
+       tmake_file="pa/t-pa pa/t-pa-hpux"
 #      if test x$enable_threads = x; then
 #          enable_threads=$have_pthread_h
 #      fi
@@ -890,7 +886,7 @@ hppa1.0-*-hpux11*)
        tm_file="${tm_file} pa/pa32-regs.h pa/long_double.h pa/som.h pa/pa-hpux.h pa/pa-hpux11.h"
        float_format=i128
        xm_defines=POSIX
-       xmake_file=pa/x-pa-hpux
+       tmake_file=pa/t-pa-hpux
 #      if test x$enable_threads = x; then
 #          enable_threads=$have_pthread_h
 #      fi
@@ -905,14 +901,14 @@ hppa1.1-*-hpux* | hppa2*-*-hpux*)
        target_cpu_default="MASK_PA_11"
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hpux9.h"
        xm_defines=POSIX
-       xmake_file=pa/x-pa-hpux
+       tmake_file=pa/t-pa-hpux
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
 hppa1.0-*-hpux*)
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hpux9.h"
        xm_defines=POSIX
-       xmake_file=pa/x-pa-hpux
+       tmake_file=pa/t-pa-hpux
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
@@ -920,20 +916,21 @@ hppa1.1-*-hiux* | hppa2*-*-hiux*)
        target_cpu_default="MASK_PA_11"
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hiux.h"
        xm_defines=POSIX
-       xmake_file=pa/x-pa-hpux
+       tmake_file=pa/t-pa-hpux
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
 hppa1.0-*-hiux*)
        tm_file="${tm_file} pa/pa32-regs.h pa/som.h pa/pa-hpux.h pa/pa-hiux.h"
        xm_defines=POSIX
-       xmake_file=pa/x-pa-hpux
+       tmake_file=pa/t-pa-hpux
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
 hppa*-*-lites*)
        tm_file="${tm_file} pa/pa32-regs.h elfos.h pa/elf.h"
        target_cpu_default="MASK_PA_11"
+       tmake_file="pa/t-bsd pa/t-pa"
        use_collect2=yes
        ;;
 hppa*-*-mpeix*)
@@ -947,8 +944,7 @@ hppa*-*-mpeix*)
 i370-*-opened*)                         # IBM 360/370/390 Architecture
        xm_defines='POSIX FATAL_EXIT_CODE=12'
        tm_file=i370/oe.h
-       tmake_file="i370/t-i370"
-       xmake_file=i370/x-oe
+       tmake_file="i370/t-oe i370/t-i370"
        c_target_objs="i370-c.o"
        cxx_target_objs="i370-c.o"
        ;;
@@ -960,7 +956,6 @@ i370-*-mvs*)
        cxx_target_objs="i370-c.o"
        ;;
 i370-*-linux*)
-       xmake_file=x-linux
        tm_file="elfos.h svr4.h linux.h i370/linux.h ${tm_file}"
        tmake_file="t-slibgcc-elf-ver t-linux"
        # broken_install=yes
@@ -976,8 +971,7 @@ i370-*-linux*)
 i[34567]86-*-chorusos*)
        xm_defines=POSIX
        tm_file="${tm_file} i386/att.h elfos.h i386/i386elf.h chorus.h"
-       tmake_file=i386/t-i386elf
-       xmake_file=x-svr4
+       tmake_file="i386/t-i386elf t-svr4"
        case x${enable_threads} in
          xyes | xpthreads | xposix)
                thread_file='posix'
@@ -987,8 +981,7 @@ i[34567]86-*-chorusos*)
 i[34567]86-*-elf*)
        xm_defines=POSIX
        tm_file="${tm_file} i386/att.h elfos.h i386/i386elf.h"
-       tmake_file=i386/t-i386elf
-       xmake_file=x-svr4
+       tmake_file="i386/t-i386elf t-svr4"
        ;;
 i[34567]86-ibm-aix*)           # IBM PS/2 running AIX
         if test x$gas = xyes
@@ -1055,7 +1048,6 @@ i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
                tm_file="${tm_file} usegas.h"
        fi
        xm_defines="POSIX SMALL_ARG_MAX"
-       xmake_file=x-svr4
        tm_file="${tm_file} i386/att.h elfos.h ptx4.h i386/ptx4-i.h"
        tmake_file=t-svr4
        extra_parts="crtbegin.o crtend.o"
@@ -1150,7 +1142,6 @@ i[34567]86-*-linux*aout*) # Intel 80386's running GNU/Linux
 i[34567]86-*-linux*libc1)      # Intel 80386's running GNU/Linux
                                # with ELF format using the
                                # GNU/Linux C library 5
-       xmake_file=x-linux      
        tm_file="${tm_file} i386/att.h elfos.h svr4.h linux.h i386/linux.h"
        tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 i386/t-crtstuff"
        extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
@@ -1163,7 +1154,6 @@ i[34567]86-*-linux*libc1) # Intel 80386's running GNU/Linux
 i[34567]86-*-linux*)   # Intel 80386's running GNU/Linux
                        # with ELF format using glibc 2
                        # aka GNU/Linux C library 6
-       xmake_file=x-linux
        tm_file="${tm_file} i386/att.h elfos.h svr4.h linux.h i386/linux.h"
        tmake_file="t-slibgcc-elf-ver t-linux i386/t-crtstuff"
        extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
@@ -1174,7 +1164,6 @@ i[34567]86-*-linux*)      # Intel 80386's running GNU/Linux
        fi
        ;;
 x86_64-*-linux*)
-       xmake_file=x-linux
        tm_file="i386/biarch64.h i386/i386.h i386/att.h elfos.h svr4.h linux.h \
                 i386/x86-64.h i386/linux64.h"
        tmake_file="t-slibgcc-elf-ver t-linux i386/t-crtstuff"
@@ -1260,7 +1249,6 @@ i[34567]86-*-rtems*|i[34567]86-*-rtemself*)
        ;;
 i[34567]86-*-sco3.2v5*)        # 80386 running SCO Open Server 5
        xm_defines=POSIX
-       xmake_file=i386/x-sco5
        install_headers_dir=install-headers-cpio
        tm_file=i386/sco5.h
        if test x$gas = xyes
@@ -1279,14 +1267,13 @@ i[34567]86-*-solaris2*)
                # Only needed if gas does not support -s
                tm_file="i386/sol2gas.h ${tm_file}"
        fi
-       tmake_file=i386/t-sol2
+       tmake_file="i386/t-sol2 t-svr4"
        if test x$gnu_ld = xyes; then
                tmake_file="$tmake_file t-slibgcc-elf-ver"
        else
                tmake_file="$tmake_file t-slibgcc-sld"
        fi
        extra_parts="crt1.o crti.o crtn.o gcrt1.o gmon.o crtbegin.o crtend.o"
-       xmake_file=x-svr4
        if test x${enable_threads} = x; then
            enable_threads=$have_pthread_h
            if test x${enable_threads} = x; then
@@ -1308,8 +1295,7 @@ i[34567]86-*-sysv5*)           # Intel x86 on System V Release 5
        then
                tm_file="${tm_file} dbx.h"
        fi
-       tmake_file=i386/t-crtpic
-       xmake_file=x-svr4
+       tmake_file="i386/t-crtpic t-svr4"
        extra_parts="crtbegin.o crtend.o"
        if test x$enable_threads = xyes; then
               thread_file='posix'
@@ -1322,15 +1308,13 @@ i[34567]86-*-sysv4*)            # Intel 80386's running system V.4
        then
                tm_file="${tm_file} dbx.h"
        fi
-       tmake_file=i386/t-crtpic
-       xmake_file=x-svr4
+       tmake_file="i386/t-crtpic t-svr4"
        extra_parts="crtbegin.o crtend.o"
        ;;
 i[34567]86-*-udk*)      # Intel x86 on SCO UW/OSR5 Dev Kit
        xm_defines=POSIX
        tm_file="${tm_file} i386/att.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h i386/udk.h"
-       tmake_file="i386/t-crtpic i386/t-udk"
-       xmake_file=x-svr4
+       tmake_file="i386/t-crtpic i386/t-udk t-svr4"
        extra_parts="crtbegin.o crtend.o"
        install_headers_dir=install-headers-cpio
        ;;
@@ -1377,7 +1361,6 @@ i[34567]86-*-win32)
        float_format=i386
        tmake_file=i386/t-cygwin
        tm_file=i386/win32.h
-       xmake_file=i386/x-cygwin
        extra_objs=winnt.o
        if test x$enable_threads = xyes; then
                thread_file='win32'
@@ -1390,7 +1373,6 @@ i[34567]86-*-pe | i[34567]86-*-cygwin*)
        float_format=i386
        tmake_file=i386/t-cygwin
        tm_file=i386/cygwin.h
-       xmake_file=i386/x-cygwin
        extra_objs=winnt.o
        if test x$enable_threads = xyes; then
                thread_file='win32'
@@ -1404,7 +1386,6 @@ i[34567]86-*-mingw32*)
        xm_file=i386/xm-mingw32.h
        tmake_file="i386/t-cygwin i386/t-mingw32"
        extra_objs=winnt.o
-       xmake_file=i386/x-cygwin
        if test x$enable_threads = xyes; then
                thread_file='win32'
        fi
@@ -1421,7 +1402,6 @@ i[34567]86-*-uwin*)
        tm_file=i386/uwin.h
        tmake_file="i386/t-cygwin i386/t-uwin"
        extra_objs=winnt.o
-       xmake_file=i386/x-cygwin
        if test x$enable_threads = xyes; then
                thread_file='win32'
        fi
@@ -1431,9 +1411,8 @@ i[34567]86-*-interix*)
        tm_file="i386/i386-interix.h interix.h"
        xm_file="i386/xm-i386-interix.h xm-interix.h"
        xm_defines=POSIX
-       tmake_file="i386/t-interix"
+       tmake_file="t-interix i386/t-interix"
        extra_objs=interix.o
-       xmake_file=x-interix
        if test x$enable_threads = xyes ; then
                thread_file='posix'
        fi
@@ -1445,7 +1424,6 @@ i[34567]86-dg-dgux*)
        xm_defines=POSIX
        tm_file="${tm_file} i386/att.h elfos.h svr4.h i386/sysv4.h i386/dgux.h"
        tmake_file=i386/t-dgux
-       xmake_file=i386/x-dgux
        install_headers_dir=install-headers-cpio
       ;;
 i860-alliant-*)                # Alliant FX/2800
@@ -1602,12 +1580,11 @@ m68000-hp-hpux*)                # HP 9000 series 300
        xm_defines=POSIX
        if test x$gas = xyes
        then
-               xmake_file=m68k/x-hp320g
                tm_file=m68k/hp310g.h
        else
-               xmake_file=m68k/x-hp320
                tm_file=m68k/hp310.h
        fi
+       tmake_file=m68k/t-hp320
        install_headers_dir=install-headers-cpio
        use_collect2=yes
        extra_headers=math-68881.h
@@ -1949,7 +1926,6 @@ m68k-*-sysv4*)                    # Motorola m68k's running system V.4
        ;;
 m68k-*-linux*aout*)            # Motorola m68k's running GNU/Linux
                                # with a.out format
-       xmake_file=x-linux
        tm_file=m68k/linux-aout.h
        tmake_file="t-linux-aout m68k/t-linux-aout"
        extra_headers=math-68881.h
@@ -1959,7 +1935,6 @@ m68k-*-linux*aout*)               # Motorola m68k's running GNU/Linux
 m68k-*-linux*libc1)            # Motorola m68k's running GNU/Linux
                                # with ELF format using the
                                # GNU/Linux C library 5
-       xmake_file=x-linux
        tm_file=m68k/linux.h
        tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1 m68k/t-linux"
        extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
@@ -1970,7 +1945,6 @@ m68k-*-linux*libc1)               # Motorola m68k's running GNU/Linux
 m68k-*-linux*)         # Motorola m68k's running GNU/Linux
                                # with ELF format using glibc 2
                                # aka the GNU/Linux C library 6.
-       xmake_file=x-linux
        tm_file=m68k/linux.h
        tmake_file="t-slibgcc-elf-ver t-linux m68k/t-linux"
        extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
@@ -2011,7 +1985,7 @@ m88k-dg-dgux*)
        case $machine in
          m88k-dg-dguxbcs*)
            tm_file="elfos.h svr4.h m88k/dgux.h m88k/dguxbcs.h"
-           tmake_file=m88k/t-dguxbcs
+           tmake_file="m88k/t-dgux m88k/t-dguxbcs"
            ;;
          *)
            tm_file="elfos.h svr4.h m88k/dgux.h"
@@ -2019,7 +1993,6 @@ m88k-dg-dgux*)
            ;;
        esac
        extra_parts="crtbegin.o bcscrtbegin.o crtend.o m88kdgux.ld"
-       xmake_file=m88k/x-dgux
        if test x$gas = xyes
        then
                tmake_file=m88k/t-dgux-gas
@@ -2098,9 +2071,8 @@ mips-sgi-irix6*)          # SGI System V.4., IRIX 6
        else
                tm_file=mips/iris6.h
        fi
-       tmake_file=mips/t-iris6
+       tmake_file="mips/t-iris mips/t-iris6"
        xm_defines=POSIX
-       xmake_file=mips/x-iris6
 #      if test x$enable_threads = xyes; then
 #              thread_file='irix'
 #      fi
@@ -2117,8 +2089,7 @@ mips-sgi-irix5cross64)            # Irix5 host, Irix 6 target, cross64
        tm_file="mips/iris6.h mips/cross64.h"
        xm_defines=POSIX
        xm_file=mips/xm-iris5.h
-       xmake_file=mips/x-iris
-       tmake_file=mips/t-cross64
+       tmake_file="mips/t-iris mips/t-cross64"
        # See comment in mips/iris[56].h files.
        use_collect2=yes
 #      if test x$enable_threads = xyes; then
@@ -2154,9 +2125,9 @@ mips-sgi-irix5*)          # SGI System V.4., IRIX 5
        else
                tm_file=mips/iris5.h
        fi
+       tmake_file=mips/t-iris
        xm_defines=POSIX
        xm_file=mips/xm-iris5.h
-       xmake_file=mips/x-iris
        # mips-tfile doesn't work yet
        # See comment in mips/iris5.h file.
        use_collect2=yes
@@ -2169,8 +2140,8 @@ mips-sgi-irix4loser*)             # Mostly like a MIPS.
        if test x$stabs = xyes; then
                tm_file="${tm_file} dbx.h"
        fi
+       tmake_file=mips/t-iris
        xm_defines=POSIX
-       xmake_file=mips/x-iris
        if test x$gas = xyes
        then    :
        else
@@ -2189,8 +2160,8 @@ mips-sgi-irix4*)          # Mostly like a MIPS.
        if test x$stabs = xyes; then
                tm_file="${tm_file} dbx.h"
        fi
+       tmake_file=mips/t-iris
        xm_defines=POSIX
-       xmake_file=mips/x-iris
        if test x$gas = xyes
        then    :
        else
@@ -2260,7 +2231,6 @@ mipsel-*-netbsd* | mips-dec-netbsd*)    # Decstation running NetBSD
        tmake_file=t-netbsd
        ;;
 mips*-*-linux*)                                # Linux MIPS, either endian.
-       xmake_file=x-linux
         tm_file="elfos.h svr4.h linux.h mips/linux.h"
        case $machine in
         mipsisa32*-*)
@@ -2643,7 +2613,6 @@ powerpc64-*-linux*)
        tm_file="${tm_file} elfos.h svr4.h rs6000/sysv4.h rs6000/linux64.h"
        out_file=rs6000/rs6000.c
        tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm"
-       xmake_file=x-linux
        extra_headers=ppc-asm.h
        ;;
 powerpc-*-beos*)
@@ -2727,7 +2696,6 @@ powerpc-*-linux*libc1)
        tm_file="${tm_file} elfos.h svr4.h rs6000/sysv4.h rs6000/linux.h"
        out_file=rs6000/rs6000.c
        tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-linux t-linux-gnulibc1 rs6000/t-ppccomm"
-       xmake_file=x-linux
        extra_headers=ppc-asm.h
        if test x$enable_threads = xyes; then
                thread_file='posix'
@@ -2737,7 +2705,6 @@ powerpc-*-linux*)
        tm_file="${tm_file} elfos.h svr4.h rs6000/sysv4.h rs6000/linux.h"
        out_file=rs6000/rs6000.c
        tmake_file="rs6000/t-ppcos t-slibgcc-elf-ver t-linux rs6000/t-ppccomm"
-       xmake_file=x-linux
        extra_headers=ppc-asm.h
        if test x$enable_threads = xyes; then
                thread_file='posix'
@@ -2846,7 +2813,6 @@ rs6000-*-lynxos*)
        use_collect2=yes
        ;;
 s390-*-linux*)
-       xmake_file=x-linux
        tm_file="s390/s390.h elfos.h svr4.h linux.h s390/linux.h"
        tmake_file="t-slibgcc-elf-ver t-linux s390/t-linux"
        extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
@@ -2855,7 +2821,6 @@ s390-*-linux*)
        fi
        ;;
 s390x-*-linux*)
-       xmake_file=x-linux
        tm_file="s390/s390.h elfos.h svr4.h linux.h s390/linux.h s390/linux64.h"
        tm_p_file=s390/s390-protos.h
        md_file=s390/s390.md
@@ -2890,7 +2855,6 @@ sh-*-rtems*)
 sh-*-linux*)
        tm_file="${tm_file} sh/elf.h sh/linux.h"
        tmake_file="sh/t-sh sh/t-elf sh/t-linux"
-       xmake_file=x-linux
        gas=yes gnu_ld=yes
        if test x$enable_threads = xyes; then
                thread_file='posix'
@@ -2954,11 +2918,9 @@ sparc-*-elf*)
        ;;
 sparc-*-linux*aout*)           # Sparc's running GNU/Linux, a.out
        tm_file="aoutos.h sparc/sparc.h sparc/aout.h sparc/linux-aout.h"
-       xmake_file=x-linux
        gnu_ld=yes
        ;;
 sparc-*-linux*libc1*)  # Sparc's running GNU/Linux, libc5
-       xmake_file=x-linux
        tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
        tmake_file="t-slibgcc-elf-ver t-linux t-linux-gnulibc1"
        extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
@@ -2966,7 +2928,6 @@ sparc-*-linux*libc1*)     # Sparc's running GNU/Linux, libc5
        float_format=sparc
        ;;
 sparc-*-linux*)                # Sparc's running GNU/Linux, libc6
-       xmake_file=x-linux
        tm_file="${tm_file} elfos.h svr4.h sparc/sysv4.h sparc/linux.h"
        tmake_file="t-slibgcc-elf-ver t-linux"
        extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
@@ -3164,7 +3125,6 @@ sparc64-*-elf*)
 sparc64-*-linux*)              # 64-bit Sparc's running GNU/Linux
        tmake_file="t-slibgcc-elf-ver t-linux sparc/t-linux64"
        tm_file="sparc/sparc_bi.h ${tm_file} elfos.h svr4.h sparc/sysv4.h sparc/linux64.h"
-       xmake_file=x-linux
        extra_parts="crtbegin.o crtbeginS.o crtend.o crtendS.o"
        gnu_ld=yes
        if test x$enable_threads = xyes; then

diff --git a/gcc/config/arm/t-riscix b/gcc/config/arm/t-riscix
index 9e59d8e..0d38cb0 100644 (file)
--- a/gcc/config/arm/t-riscix
+++ b/gcc/config/arm/t-riscix
@@ -2,3 +2,5 @@
 # difference.  It is then pointless adding debugging.
 TARGET_LIBGCC2_CFLAGS = -fomit-frame-pointer
 LIBGCC2_DEBUG_CFLAGS = -g0
+
+FIXPROTO_DEFINES= -D_POSIX_SOURCE -D_XOPEN_C -D_BSD_C -D_XOPEN_SOURCE

diff --git a/gcc/config/arm/x-riscix b/gcc/config/arm/x-riscix
deleted file mode 100644 (file)
index 7f0b16e..0000000
--- a/gcc/config/arm/x-riscix
+++ /dev/null
@@ -1 +0,0 @@
-FIXPROTO_DEFINES= -D_POSIX_SOURCE -D_XOPEN_C -D_BSD_C -D_XOPEN_SOURCE

diff --git a/gcc/config/i370/x-oe b/gcc/config/i370/t-oe
similarity index 64%
rename from gcc/config/i370/x-oe
rename to gcc/config/i370/t-oe
index 045778b..a2130a1 100644 (file)
--- a/gcc/config/i370/x-oe
+++ b/gcc/config/i370/t-oe
@@ -1,5 +1,5 @@
 #
-# Host is an i370 running OpenEdition
+# Target is an i370 running OpenEdition
 #
 
 # Don't bother fixing up header files, they're weird

diff --git a/gcc/config/i386/t-beos b/gcc/config/i386/t-beos
index b5c8ec2..e545abd 100644 (file)
--- a/gcc/config/i386/t-beos
+++ b/gcc/config/i386/t-beos
@@ -2,3 +2,6 @@
 # we are most likely to want to apply any fixes to.
 SYSTEM_HEADER_DIR = /boot/develop/headers/posix
 CROSS_SYSTEM_HEADER_DIR = $(tooldir)/sys-include/posix
+
+# Don't run fixproto
+STMP_FIXPROTO =

diff --git a/gcc/config/i386/t-cygwin b/gcc/config/i386/t-cygwin
index b9595c6..68d2ac5 100644 (file)
--- a/gcc/config/i386/t-cygwin
+++ b/gcc/config/i386/t-cygwin
@@ -16,3 +16,6 @@ LIBGCC2_INCLUDES = -I$(srcdir)/../winsup/include \
 
 winnt.o: $(srcdir)/config/i386/winnt.c $(RTL_H) $(TREE_H) $(CONFIG_H)
        $(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(srcdir)/config/i386/winnt.c
+
+# Don't run fixproto
+STMP_FIXPROTO =

diff --git a/gcc/config/i386/t-dgux b/gcc/config/i386/t-dgux
index 1bf024a..e1bccee 100644 (file)
--- a/gcc/config/i386/t-dgux
+++ b/gcc/config/i386/t-dgux
@@ -6,3 +6,6 @@ EXTRA_PARTS=crti.o crtbegin.o crtend.o
 crti.o: $(srcdir)/config/i386/sol2-ci.asm $(GCC_PASSES)
        sed -e '/^!/d' <$(srcdir)/config/i386/sol2-ci.asm >crti.s
        $(GCC_FOR_TARGET) -c -o crti.o crti.s
+
+# Don't run fixproto
+STMP_FIXPROTO = 

diff --git a/gcc/config/i386/t-sco5 b/gcc/config/i386/t-sco5
index 42ae7db..d0c457e 100644 (file)
--- a/gcc/config/i386/t-sco5
+++ b/gcc/config/i386/t-sco5
@@ -13,3 +13,6 @@ TARGET_LIBGCC2_CFLAGS = -fPIC
 crti.o: $(srcdir)/config/i386/sol2-ci.asm $(GCC_PASSES)
        sed -e '/^!/d' <$(srcdir)/config/i386/sol2-ci.asm >crti.s
        $(GCC_FOR_TARGET) -c -o crti.o crti.s
+
+# See all the declarations.
+FIXPROTO_DEFINES = -D_XOPEN_SOURCE -D_POSIX_C_SOURCE=2

diff --git a/gcc/config/i386/t-sco5gas b/gcc/config/i386/t-sco5gas
index 2bca87b..2d0b48a 100644 (file)
--- a/gcc/config/i386/t-sco5gas
+++ b/gcc/config/i386/t-sco5gas
@@ -18,3 +18,6 @@ INSTALL_LIBGCC=install-multilib
 crti.o: $(srcdir)/config/i386/sol2-ci.asm $(GCC_PASSES)
        sed -e '/^!/d' <$(srcdir)/config/i386/sol2-ci.asm >crti.s
        $(GCC_FOR_TARGET) -c -o crti.o crti.s
+
+# See all the declarations.
+FIXPROTO_DEFINES = -D_XOPEN_SOURCE -D_POSIX_C_SOURCE=2

diff --git a/gcc/config/i386/x-beos b/gcc/config/i386/x-beos
index e4fd443..16fc937 100644 (file)
--- a/gcc/config/i386/x-beos
+++ b/gcc/config/i386/x-beos
@@ -1,5 +1,2 @@
 # configuration for BeOS
 INSTALL=install -c
-
-# Don't run fixproto
-STMP_FIXPROTO =

diff --git a/gcc/config/i386/x-dgux b/gcc/config/i386/x-dgux
deleted file mode 100644 (file)
index 5d07910..0000000
--- a/gcc/config/i386/x-dgux
+++ /dev/null
@@ -1 +0,0 @@
-STMP_FIXPROTO = 

diff --git a/gcc/config/i386/x-sco5 b/gcc/config/i386/x-sco5
deleted file mode 100644 (file)
index bc3d98b..0000000
--- a/gcc/config/i386/x-sco5
+++ /dev/null
@@ -1,2 +0,0 @@
-# See all the declarations.
-FIXPROTO_DEFINES = -D_XOPEN_SOURCE -D_POSIX_C_SOURCE=2

diff --git a/gcc/config/m68k/x-hp320 b/gcc/config/m68k/t-hp320
similarity index 100%
rename from gcc/config/m68k/x-hp320
rename to gcc/config/m68k/t-hp320

diff --git a/gcc/config/m68k/x-hp320g b/gcc/config/m68k/x-hp320g
deleted file mode 100644 (file)
index d3bbb66..0000000
--- a/gcc/config/m68k/x-hp320g
+++ /dev/null
@@ -1,2 +0,0 @@
-# So putenv and other functions get seen by fixproto.
-FIXPROTO_DEFINES = -D_HPUX_SOURCE

diff --git a/gcc/config/m88k/t-dgux b/gcc/config/m88k/t-dgux
index 384100b..afce596 100644 (file)
--- a/gcc/config/m88k/t-dgux
+++ b/gcc/config/m88k/t-dgux
@@ -22,3 +22,6 @@ bcscrtbegin.o:     crtstuff.c $(GCC_PASSES) $(CONFIG_H) gbl-ctors.h
 
 # Build libgcc.a, crtbegin.o, and crtend.o as bcs objects
 GCC_FOR_TARGET = PATH=/usr/sde/m88kbcs/usr/bin/:/usr/bin TARGET_BINARY_INTERFACE=m88kbcs ./xgcc -B./ -msvr3 -D_M88KBCS_TARGET -mno-ocs-debug-info
+
+# Don't run fixproto
+STMP_FIXPROTO = 

diff --git a/gcc/config/m88k/t-dguxbcs b/gcc/config/m88k/t-dguxbcs
index 6a3461a..cdebc78 100644 (file)
--- a/gcc/config/m88k/t-dguxbcs
+++ b/gcc/config/m88k/t-dguxbcs
@@ -1,26 +1 @@
-# Specify how to create the *.asm files
-
-MOVE_ASM = moveHI15x.asm moveQI16x.asm moveSI46x.asm moveSI64n.asm \
-          moveHI48x.asm moveSI45x.asm moveSI47x.asm moveSI96x.asm \
-          moveDI96x.asm
-
-$(MOVE_ASM): $(srcdir)/config/m88k/m88k-move.sh
-       $(srcdir)/config/m88k/m88k-move.sh
-
-LIB2FUNCS_EXTRA = $(MOVE_ASM)
-
-# In a coff environment, a link script is required for ctors and dtors.
-m88kdgux.ld: $(srcdir)/config/m88k/dgux.ld
-       rm -f m88kdgux.ld; cp $(srcdir)/config/m88k/dgux.ld ./m88kdgux.ld
-
-# A bcs crtbegin.o is needed since bcs does not  
-# increment the stack pointer in the init section as elf does 
-bcscrtbegin.o:     crtstuff.c $(GCC_PASSES) $(CONFIG_H) gbl-ctors.h
-       $(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) -DCRT_BEGIN -DBCS \
-       -finhibit-size-directive -fno-inline-functions \
-       -g0 -c $(srcdir)/crtstuff.c -o bcscrtbegin.o 
-
-# Build libgcc.a, crtbegin.o, and crtend.o as bcs objects
-GCC_FOR_TARGET = PATH=/usr/sde/m88kbcs/usr/bin/:/usr/bin TARGET_BINARY_INTERFACE=m88kbcs ./xgcc -B./ -msvr3 -D_M88KBCS_TARGET -mno-ocs-debug-info
-
 T_CFLAGS = -O -D_M88KBCS_TARGET

diff --git a/gcc/config/m88k/x-dgux b/gcc/config/m88k/x-dgux
deleted file mode 100644 (file)
index 5d07910..0000000
--- a/gcc/config/m88k/x-dgux
+++ /dev/null
@@ -1 +0,0 @@
-STMP_FIXPROTO = 

diff --git a/gcc/config/mips/x-iris b/gcc/config/mips/t-iris
similarity index 100%
rename from gcc/config/mips/x-iris
rename to gcc/config/mips/t-iris

diff --git a/gcc/config/mips/x-iris6 b/gcc/config/mips/x-iris6
deleted file mode 100644 (file)
index a9b39fa..0000000
--- a/gcc/config/mips/x-iris6
+++ /dev/null
@@ -1,2 +0,0 @@
-# Find all of the declarations from the header files
-FIXPROTO_DEFINES= -D__EXTENSIONS__  -D_SGI_SOURCE -D_LANGUAGE_C_PLUS_PLUS

diff --git a/gcc/config/pa/x-pa b/gcc/config/pa/t-bsd
similarity index 100%
rename from gcc/config/pa/x-pa
rename to gcc/config/pa/t-bsd

diff --git a/gcc/config/pa/x-pa-hpux b/gcc/config/pa/t-pa-hpux
similarity index 100%
rename from gcc/config/pa/x-pa-hpux
rename to gcc/config/pa/t-pa-hpux

diff --git a/gcc/config/rs6000/x-cygwin b/gcc/config/rs6000/x-cygwin
deleted file mode 100644 (file)
index 5e796a0..0000000
--- a/gcc/config/rs6000/x-cygwin
+++ /dev/null
@@ -1,4 +0,0 @@
-# Don't run fixproto
-STMP_FIXPROTO =
-# Don't need collect2
-USE_COLLECT2 =

diff --git a/gcc/config/i386/x-cygwin b/gcc/config/t-interix
similarity index 100%
rename from gcc/config/i386/x-cygwin
rename to gcc/config/t-interix

diff --git a/gcc/config/t-svr4 b/gcc/config/t-svr4
index e6be0c3..52c9b28 100644 (file)
--- a/gcc/config/t-svr4
+++ b/gcc/config/t-svr4
@@ -6,3 +6,6 @@
 
 CRTSTUFF_T_CFLAGS = -fPIC
 TARGET_LIBGCC2_CFLAGS = -fPIC
+
+# See all the declarations.
+FIXPROTO_DEFINES = -D_XOPEN_SOURCE

diff --git a/gcc/config/x-interix b/gcc/config/x-interix
index 30606a3..3234f4b 100644 (file)
--- a/gcc/config/x-interix
+++ b/gcc/config/x-interix
@@ -1,11 +1,6 @@
 # These are host overrides
 # From config dir
 
-# See all the declarations.
-FIXPROTO_DEFINES = -D_XOPEN_SOURCE
-
-# Don't run fixproto
-STMP_FIXPROTO =
 RANLIB = :
 RANLIB_TEST = false
 SHELL = sh

diff --git a/gcc/config/x-linux b/gcc/config/x-linux
deleted file mode 100644 (file)
index d284b3e..0000000
--- a/gcc/config/x-linux
+++ /dev/null
@@ -1,2 +0,0 @@
-# Don't run fixproto
-STMP_FIXPROTO =

diff --git a/gcc/config/x-svr4 b/gcc/config/x-svr4
deleted file mode 100644 (file)
index ce50fe9..0000000
--- a/gcc/config/x-svr4
+++ /dev/null
@@ -1,2 +0,0 @@
-# See all the declarations.
-FIXPROTO_DEFINES = -D_XOPEN_SOURCE