* i386.md (push mem DI peep2): New.

	(mov 0, mov -1 peep2): Handle 64bit.
	(lea to arithmetics peep2): Handle 64bit leas.
	(rsp arithmetics to push/pop peep2s): New.

	* i386.md (truncdfsf2_3, trunctfsf2_2): Change predicate to memory_operand.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@40847 138bc75d-0d04-0410-961f-82ee72b054a4

diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index db3c86d..477517c 100644 (file)
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,3 +1,12 @@
+Mon Mar 26 15:55:08 CEST 2001  Jan Hubicka  <jh@suse.cz>
+
+       * i386.md (push mem DI peep2): New.
+       (mov 0, mov -1 peep2): Handle 64bit.
+       (lea to arithmetics peep2): Handle 64bit leas.
+       (rsp arithmetics to push/pop peep2s): New.
+
+       * i386.md (truncdfsf2_3, trunctfsf2_2): Change predicate to memory_operand.
+
 Mon Mar 26 14:35:18 CEST 2001  Jan Hubicka  <jh@suse.cz>
 
        * i386.c (struct machine_function): Add save_varrargs_registers.

diff --git a/gcc/config/i386/i386.md b/gcc/config/i386/i386.md
index 6a23023..8f6c36b 100644 (file)
--- a/gcc/config/i386/i386.md
+++ b/gcc/config/i386/i386.md
@@ -4341,7 +4341,7 @@
    (set_attr "mode" "DF,SF")])
 
 (define_insn "truncdfsf2_3"
-  [(set (match_operand:SF 0 "nonimmediate_operand" "=m")
+  [(set (match_operand:SF 0 "memory_operand" "=m")
        (float_truncate:SF
         (match_operand:DF 1 "register_operand" "f")))]
   "TARGET_80387"
@@ -4490,7 +4490,7 @@
    (set_attr "mode" "SF")])
 
 (define_insn "*trunctfsf2_2"
-  [(set (match_operand:SF 0 "nonimmediate_operand" "=m")
+  [(set (match_operand:SF 0 "memory_operand" "=m")
        (float_truncate:SF
         (match_operand:TF 1 "register_operand" "f")))]
   "TARGET_80387"
@@ -15890,6 +15890,15 @@
    (set (match_dup 0) (match_dup 2))]
   "")
 
+(define_peephole2
+  [(set (match_operand:DI 0 "push_operand" "")
+       (match_operand:DI 1 "memory_operand" ""))
+   (match_scratch:DI 2 "r")]
+  "! optimize_size && ! TARGET_PUSH_MEMORY"
+  [(set (match_dup 2) (match_dup 1))
+   (set (match_dup 0) (match_dup 2))]
+  "")
+
 ;; We need to handle SFmode only, because DFmode and XFmode is split to
 ;; SImode pushes.
 (define_peephole2
@@ -16209,12 +16218,14 @@
        (const_int 0))]
   "(GET_MODE (operands[0]) == QImode
     || GET_MODE (operands[0]) == HImode
-    || GET_MODE (operands[0]) == SImode)
+    || GET_MODE (operands[0]) == SImode
+    || (GET_MODE (operands[0]) == DImode && TARGET_64BIT))
    && (! TARGET_USE_MOV0 || optimize_size)
    && peep2_regno_dead_p (0, FLAGS_REG)"
   [(parallel [(set (match_dup 0) (const_int 0))
              (clobber (reg:CC 17))])]
-  "operands[0] = gen_rtx_REG (SImode, true_regnum (operands[0]));")
+  "operands[0] = gen_rtx_REG (GET_MODE (operands[0]) == DImode ? DImode : SImode,
+                             true_regnum (operands[0]));")
 
 (define_peephole2
   [(set (strict_low_part (match_operand 0 "register_operand" ""))
@@ -16231,12 +16242,14 @@
   [(set (match_operand 0 "register_operand" "")
        (const_int -1))]
   "(GET_MODE (operands[0]) == HImode
-    || GET_MODE (operands[0]) == SImode)
+    || GET_MODE (operands[0]) == SImode 
+    || (GET_MODE (operands[0]) == DImode && TARGET_64BIT))
    && (optimize_size || TARGET_PENTIUM)
    && peep2_regno_dead_p (0, FLAGS_REG)"
   [(parallel [(set (match_dup 0) (const_int -1))
              (clobber (reg:CC 17))])]
-  "operands[0] = gen_rtx_REG (SImode, true_regnum (operands[0]));")
+  "operands[0] = gen_rtx_REG (GET_MODE (operands[0]) == DImode ? DImode : SImode,
+                             true_regnum (operands[0]));")
 
 ;; Attempt to convert simple leas to adds. These can be created by
 ;; move expanders.
@@ -16251,14 +16264,53 @@
 
 (define_peephole2
   [(set (match_operand:SI 0 "register_operand" "")
+       (subreg:SI (plus:DI (match_operand:DI 1 "register_operand" "")
+                           (match_operand:DI 2 "nonmemory_operand" "")) 0))]
+  "peep2_regno_dead_p (0, FLAGS_REG) && REGNO (operands[0]) == REGNO (operands[1])"
+  [(parallel [(set (match_dup 0) (plus:SI (match_dup 0) (match_dup 2)))
+             (clobber (reg:CC 17))])]
+  "operands[2] = gen_lowpart (SImode, operands[2]);")
+
+(define_peephole2
+  [(set (match_operand:DI 0 "register_operand" "")
+       (plus:DI (match_dup 0)
+                (match_operand:DI 1 "x86_64_general_operand" "")))]
+  "peep2_regno_dead_p (0, FLAGS_REG)"
+  [(parallel [(set (match_dup 0) (plus:DI (match_dup 0) (match_dup 1)))
+             (clobber (reg:CC 17))])]
+  "")
+
+(define_peephole2
+  [(set (match_operand:SI 0 "register_operand" "")
        (mult:SI (match_dup 0)
-                (match_operand:SI 1 "immediate_operand" "")))]
+                (match_operand:SI 1 "const_int_operand" "")))]
   "exact_log2 (INTVAL (operands[1])) >= 0
    && peep2_regno_dead_p (0, FLAGS_REG)"
   [(parallel [(set (match_dup 0) (ashift:SI (match_dup 0) (match_dup 2)))
              (clobber (reg:CC 17))])]
   "operands[2] = GEN_INT (exact_log2 (INTVAL (operands[1])));")
 
+(define_peephole2
+  [(set (match_operand:DI 0 "register_operand" "")
+       (mult:DI (match_dup 0)
+                (match_operand:DI 1 "const_int_operand" "")))]
+  "exact_log2 (INTVAL (operands[1])) >= 0
+   && peep2_regno_dead_p (0, FLAGS_REG)"
+  [(parallel [(set (match_dup 0) (ashift:DI (match_dup 0) (match_dup 2)))
+             (clobber (reg:CC 17))])]
+  "operands[2] = GEN_INT (exact_log2 (INTVAL (operands[1])));")
+
+(define_peephole2
+  [(set (match_operand:SI 0 "register_operand" "")
+       (subreg:SI (mult:DI (match_operand:DI 1 "register_operand" "")
+                  (match_operand:DI 2 "const_int_operand" "")) 0))]
+  "exact_log2 (INTVAL (operands[1])) >= 0
+   && REGNO (operands[0]) == REGNO (operands[1])
+   && peep2_regno_dead_p (0, FLAGS_REG)"
+  [(parallel [(set (match_dup 0) (ashift:SI (match_dup 0) (match_dup 2)))
+             (clobber (reg:CC 17))])]
+  "operands[2] = GEN_INT (exact_log2 (INTVAL (operands[2])));")
+
 ;; The ESP adjustments can be done by the push and pop instructions.  Resulting
 ;; code is shorter, since push is only 1 byte, while add imm, %esp 3 bytes.  On
 ;; many CPUs it is also faster, since special hardware to avoid esp
@@ -16456,6 +16508,121 @@
              (clobber (match_dup 0))])]
   "")
 \f
+(define_peephole2
+  [(match_scratch:DI 0 "r")
+   (parallel [(set (reg:DI 7) (plus:DI (reg:DI 7) (const_int -8)))
+             (set (reg:DI 6) (reg:DI 6))
+             (clobber (reg:CC 17))])]
+  "optimize_size || !TARGET_SUB_ESP_4"
+  [(clobber (match_dup 0))
+   (parallel [(set (mem:DI (pre_dec:DI (reg:DI 7))) (match_dup 0))
+             (set (reg:DI 6) (reg:DI 6))])])
+
+(define_peephole2
+  [(match_scratch:DI 0 "r")
+   (parallel [(set (reg:DI 7) (plus:DI (reg:DI 7) (const_int -16)))
+             (set (reg:DI 6) (reg:DI 6))
+             (clobber (reg:CC 17))])]
+  "optimize_size || !TARGET_SUB_ESP_8"
+  [(clobber (match_dup 0))
+   (set (mem:DI (pre_dec:DI (reg:DI 7))) (match_dup 0))
+   (parallel [(set (mem:DI (pre_dec:DI (reg:DI 7))) (match_dup 0))
+             (set (reg:DI 6) (reg:DI 6))])])
+
+;; Convert esp substractions to push.
+(define_peephole2
+  [(match_scratch:DI 0 "r")
+   (parallel [(set (reg:DI 7) (plus:DI (reg:DI 7) (const_int -8)))
+             (clobber (reg:CC 17))])]
+  "optimize_size || !TARGET_SUB_ESP_4"
+  [(clobber (match_dup 0))
+   (set (mem:DI (pre_dec:DI (reg:DI 7))) (match_dup 0))])
+
+(define_peephole2
+  [(match_scratch:DI 0 "r")
+   (parallel [(set (reg:DI 7) (plus:DI (reg:DI 7) (const_int -16)))
+             (clobber (reg:CC 17))])]
+  "optimize_size || !TARGET_SUB_ESP_8"
+  [(clobber (match_dup 0))
+   (set (mem:DI (pre_dec:DI (reg:DI 7))) (match_dup 0))
+   (set (mem:DI (pre_dec:DI (reg:DI 7))) (match_dup 0))])
+
+;; Convert epilogue deallocator to pop.
+(define_peephole2
+  [(match_scratch:DI 0 "r")
+   (parallel [(set (reg:DI 7) (plus:DI (reg:DI 7) (const_int 8)))
+             (set (reg:DI 6) (reg:DI 6))
+             (clobber (reg:CC 17))])]
+  "optimize_size || !TARGET_ADD_ESP_4"
+  [(parallel [(set (match_dup 0) (mem:DI (reg:DI 7)))
+             (set (reg:DI 7) (plus:DI (reg:DI 7) (const_int 8)))
+             (set (reg:DI 6) (reg:DI 6))])]
+  "")
+
+;; Two pops case is tricky, since pop causes dependency on destination register.
+;; We use two registers if available.
+(define_peephole2
+  [(match_scratch:DI 0 "r")
+   (match_scratch:DI 1 "r")
+   (parallel [(set (reg:DI 7) (plus:DI (reg:DI 7) (const_int 16)))
+             (set (reg:DI 6) (reg:DI 6))
+             (clobber (reg:CC 17))])]
+  "optimize_size || !TARGET_ADD_ESP_8"
+  [(parallel [(set (match_dup 0) (mem:DI (reg:DI 7)))
+             (set (reg:DI 7) (plus:DI (reg:DI 7) (const_int 8)))
+             (set (reg:DI 6) (reg:DI 6))])
+   (parallel [(set (match_dup 1) (mem:DI (reg:DI 7)))
+             (set (reg:DI 7) (plus:DI (reg:DI 7) (const_int 8)))])]
+  "")
+
+(define_peephole2
+  [(match_scratch:DI 0 "r")
+   (parallel [(set (reg:DI 7) (plus:DI (reg:DI 7) (const_int 16)))
+             (set (reg:DI 6) (reg:DI 6))
+             (clobber (reg:CC 17))])]
+  "optimize_size"
+  [(parallel [(set (match_dup 0) (mem:DI (reg:DI 7)))
+             (set (reg:DI 7) (plus:DI (reg:DI 7) (const_int 8)))
+             (set (reg:DI 6) (reg:DI 6))])
+   (parallel [(set (match_dup 0) (mem:DI (reg:DI 7)))
+             (set (reg:DI 7) (plus:DI (reg:DI 7) (const_int 8)))])]
+  "")
+
+;; Convert esp additions to pop.
+(define_peephole2
+  [(match_scratch:DI 0 "r")
+   (parallel [(set (reg:DI 7) (plus:DI (reg:DI 7) (const_int 8)))
+             (clobber (reg:CC 17))])]
+  ""
+  [(parallel [(set (match_dup 0) (mem:DI (reg:DI 7)))
+             (set (reg:DI 7) (plus:DI (reg:DI 7) (const_int 8)))])]
+  "")
+
+;; Two pops case is tricky, since pop causes dependency on destination register.
+;; We use two registers if available.
+(define_peephole2
+  [(match_scratch:DI 0 "r")
+   (match_scratch:DI 1 "r")
+   (parallel [(set (reg:DI 7) (plus:DI (reg:DI 7) (const_int 16)))
+             (clobber (reg:CC 17))])]
+  ""
+  [(parallel [(set (match_dup 0) (mem:DI (reg:DI 7)))
+             (set (reg:DI 7) (plus:DI (reg:DI 7) (const_int 8)))])
+   (parallel [(set (match_dup 1) (mem:DI (reg:DI 7)))
+             (set (reg:DI 7) (plus:DI (reg:DI 7) (const_int 8)))])]
+  "")
+
+(define_peephole2
+  [(match_scratch:DI 0 "r")
+   (parallel [(set (reg:DI 7) (plus:DI (reg:DI 7) (const_int 16)))
+             (clobber (reg:CC 17))])]
+  "optimize_size"
+  [(parallel [(set (match_dup 0) (mem:DI (reg:DI 7)))
+             (set (reg:DI 7) (plus:DI (reg:DI 7) (const_int 8)))])
+   (parallel [(set (match_dup 0) (mem:DI (reg:DI 7)))
+             (set (reg:DI 7) (plus:DI (reg:DI 7) (const_int 8)))])]
+  "")
+\f
 ;; Call-value patterns last so that the wildcard operand does not
 ;; disrupt insn-recog's switch tables.