+2001-12-22 Geoffrey Keating <geoffk@redhat.com>
+ Mark Salter <msalter@redhat.com>
+ Catherine Moore <clm@redhat.com>
+ Richard Henderson <rth@redhat.com>
+
+ * configure.in: Add xstormy16.
+ * libnosys/configure.in: Add xstormy16.
+ * configure: Regenerated.
+ * libnosys/configure: Regenerated.
+ * xstormy16/Makefile.in: New file.
+ * xstormy16/close.c: New file.
+ * xstormy16/configure: New file.
+ * xstormy16/configure.in: New file.
+ * xstormy16/crt0.s: New file.
+ * xstormy16/crt0_stub.s: New file.
+ * xstormy16/crti.s: New file.
+ * xstormy16/crtn.s: New file.
+ * xstormy16/eva_app.c: New file.
+ * xstormy16/eva_app.ld: New file.
+ * xstormy16/eva_stub.ld: New file.
+ * xstormy16/fstat.c: New file.
+ * xstormy16/getpid.c: New file.
+ * xstormy16/kill.c: New file.
+ * xstormy16/lseek.c: New file.
+ * xstormy16/open.c: New file.
+ * xstormy16/sbrk.c: New file.
+ * xstormy16/sim_high.ld: New file.
+ * xstormy16/stat.c: New file.
+ * xstormy16/syscalls.S: New file.
+ * xstormy16/syscalls.m4: New file.
+ * xstormy16/unlink.c: New file.
+ * xstormy16/xstormy16_stub.c: New file.
+
2001-10-31 Jeff Johnston <jjohnstn@redhat.com>
* m32r/Makefile.in: Use gdb stub set by configure.
mcore-*-*)
configdirs="${configdirs} mcore testsuite"
;;
+ xstormy16-*-*)
+ configdirs="${configdirs} xstormy16 testsuite"
+ ;;
esac
# temporarily strip out testsuite
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:826: checking for $ac_word" >&5
+echo "configure:814: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:856: checking for $ac_word" >&5
+echo "configure:844: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:905: checking whether we are using GNU C" >&5
+echo "configure:893: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:914: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:902: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:929: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:917: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ar", so it can be a program name with args.
set dummy ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:961: checking for $ac_word" >&5
+echo "configure:949: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:995: checking for $ac_word" >&5
+echo "configure:983: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
mcore-*-*)
configdirs="${configdirs} mcore testsuite"
;;
+ xstormy16-*-*)
+ configdirs="${configdirs} xstormy16 testsuite"
+ ;;
esac
# temporarily strip out testsuite
program_transform_name=s,x,x,
silent=
site=
+sitefile=
srcdir=
target=NONE
verbose=
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
+ --site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
+ -site-file | --site-file | --site-fil | --site-fi | --site-f)
+ ac_prev=sitefile ;;
+ -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+ sitefile="$ac_optarg" ;;
+
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+ if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
fi
+else
+ CONFIG_SITE="$sitefile"
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:588: checking host system type" >&5
+echo "configure:599: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:609: checking target system type" >&5
+echo "configure:620: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:627: checking build system type" >&5
+echo "configure:638: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:681: checking for a BSD compatible install" >&5
+echo "configure:692: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
;;
w65-*-*)
;;
+ xstormy16-*-*)
+ ;;
z8k-*-*)
;;
*)
echo $ac_n "checking for .previous assembler directive""... $ac_c" 1>&6
-echo "configure:813: checking for .previous assembler directive" >&5
+echo "configure:822: checking for .previous assembler directive" >&5
if eval "test \"`echo '$''{'libc_cv_asm_previous_directive'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
.section foo_section
.previous
EOF
- if { ac_try='${CC-cc} -c $CFLAGS conftest.s 1>&5'; { (eval echo configure:821: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+ if { ac_try='${CC-cc} -c $CFLAGS conftest.s 1>&5'; { (eval echo configure:830: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
cat >> confdefs.h <<\EOF
#define HAVE_ASM_PREVIOUS_DIRECTIVE 1
EOF
echo "$ac_t""$libc_cv_asm_previous_directive" 1>&6
echo $ac_n "checking for .popsection assembler directive""... $ac_c" 1>&6
-echo "configure:832: checking for .popsection assembler directive" >&5
+echo "configure:841: checking for .popsection assembler directive" >&5
if eval "test \"`echo '$''{'libc_cv_asm_popsection_directive'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
.pushsection foo_section
.popsection
EOF
- if { ac_try='${CC-cc} -c $CFLAGS conftest.s 1>&5'; { (eval echo configure:840: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+ if { ac_try='${CC-cc} -c $CFLAGS conftest.s 1>&5'; { (eval echo configure:849: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
cat >> confdefs.h <<\EOF
#define HAVE_ASM_POPSECTION_DIRECTIVE 1
EOF
esac
echo $ac_n "checking for function prefix""... $ac_c" 1>&6
-echo "configure:855: checking for function prefix" >&5
+echo "configure:864: checking for function prefix" >&5
if eval "test \"`echo '$''{'libc_dollar_prefix'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.c <<\EOF
foo () { }
EOF
-if { ac_try='${CC-cc} -S conftest.c -o - | fgrep "\$foo" > /dev/null'; { (eval echo configure:862: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; };
+if { ac_try='${CC-cc} -S conftest.c -o - | fgrep "\$foo" > /dev/null'; { (eval echo configure:871: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; };
then
libc_dollar_prefix=yes
else
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:887: checking for $ac_word" >&5
+echo "configure:896: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:917: checking for $ac_word" >&5
+echo "configure:926: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:966: checking whether we are using GNU C" >&5
+echo "configure:975: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:975: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:984: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:990: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:999: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1026: checking for $ac_word" >&5
+echo "configure:1035: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
;;
w65-*-*)
;;
+ xstormy16-*-*)
+ ;;
z8k-*-*)
;;
*)
--- /dev/null
+#
+#
+
+VPATH = @srcdir@ @srcdir@/..
+srcdir = @srcdir@
+objdir = .
+srcroot = $(srcdir)/../..
+objroot = $(objdir)/../..
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+host_alias = @host_alias@
+target_alias = @target_alias@
+
+bindir = @bindir@
+libdir = @libdir@
+tooldir = $(exec_prefix)/$(target_alias)
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_DATA = @INSTALL_DATA@
+
+# Multilib support variables.
+# TOP is used instead of MULTI{BUILD,SRC}TOP.
+MULTIDIRS =
+MULTISUBDIR =
+
+SHELL = /bin/sh
+
+CC = @CC@
+
+AS = @AS@
+AR = @AR@
+LD = @LD@
+RANLIB = @RANLIB@
+
+# Yuk.
+OBJCOPY = $(subst ranlib,objcopy,$(RANLIB))
+
+OBJS = isatty.o
+CFLAGS = -g -O2
+ASFLAGS = --gdwarf2
+SCRIPTS =
+CRT = crt0.o crti.o crtn.o
+
+# Here is all of the simulator stuff
+SIM_SCRIPTS = sim_high.ld
+SIM_LDFLAGS =
+SIM_BSP = libsim.a
+SIM_OBJS = syscalls.o sbrk.o
+
+# Here is stuff for building apps for GDB on the EVA board
+EVA_APP_BSP = libeva_app.a
+EVA_APP_OBJS = close.o fstat.o getpid.o kill.o lseek.o open.o \
+ stat.o unlink.o eva_app.o
+EVA_APP_SCRIPTS = eva_app.ld
+
+# Stub stuff
+EVA_STUB_HEX = eva_stub.hex
+EVA_STUB = eva_stub
+EVA_STUB_OBJS = xstormy16_stub.o crt0_stub.o
+
+# Host specific makefile fragment comes in here.
+@host_makefile_frag@
+
+#
+# build a test program for each target board. Just trying to get
+# it to link is a good test, so we ignore all the errors for now.
+#
+# all: ${MON_CRT0} ${MON_BSP}
+all: ${CRT} ${SIM_BSP} ${EVA_APP_BSP} ${EVA_STUB_HEX}
+
+#
+# here's where we build the board support packages for each target
+#
+${SIM_BSP}: ${OBJS} ${SIM_OBJS}
+ ${AR} ${ARFLAGS} ${SIM_BSP} ${SIM_OBJS} ${OBJS}
+ ${RANLIB} ${SIM_BSP}
+
+${EVA_APP_BSP}: ${OBJS} ${EVA_APP_OBJS}
+ ${AR} ${ARFLAGS} ${EVA_APP_BSP} ${EVA_APP_OBJS} ${OBJS}
+ ${RANLIB} ${EVA_APP_BSP}
+
+${EVA_STUB_HEX}: ${EVA_STUB}
+ ${OBJCOPY} -O ihex $< $@
+
+${EVA_STUB}: ${EVA_STUB_OBJS} ${srcdir}/eva_stub.ld
+ ${CC} -g -Os -nostartfiles -T${srcdir}/eva_stub.ld ${EVA_STUB_OBJS} -o $@
+
+
+#
+# here's where we build the test programs for each target
+#
+.PHONY: test
+test:
+ true
+
+#
+#
+#
+.c.S:
+ ${CC} ${CFLAGS_FOR_TARGET} -c $<
+
+clean mostlyclean:
+ rm -f a.out core *.i *.o *-test *.srec *.dis *.x *.hex $(SIM_BSP) $(EVA_APP_BSP) $(EVA_STUB}
+
+distclean maintainer-clean realclean: clean
+ rm -f Makefile config.status *~
+
+.PHONY: install info install-info clean-info
+install:
+ set -e; for x in ${SIM_BSP} ${CRT} ${EVA_APP_BSP} ${EVA_STUB_HEX}; do\
+ ${INSTALL_DATA} $$x ${tooldir}/lib${MULTISUBDIR}/$$x; \
+ done
+ @for script in ${SCRIPTS} ${SIM_SCRIPTS} ${EVA_APP_SCRIPTS}; do\
+ ${INSTALL_DATA} ${srcdir}/$${script} ${tooldir}/lib${MULTISUBDIR}/$${script}; \
+ done
+
+
+doc:
+info:
+install-info:
+clean-info:
+
+Makefile: Makefile.in config.status @host_makefile_frag_path@
+ $(SHELL) config.status
+
+config.status: configure
+ $(SHELL) config.status --recheck
--- /dev/null
+/* close.c -- close a file descriptor.
+ *
+ * Copyright (c) 1995 Cygnus Support
+ *
+ * The authors hereby grant permission to use, copy, modify, distribute,
+ * and license this software and its documentation for any purpose, provided
+ * that existing copyright notices are retained in all copies and that this
+ * notice is included verbatim in any distributions. No written agreement,
+ * license, or royalty fee is required for any of the authorized uses.
+ * Modifications to this software may be copyrighted by their authors
+ * and need not follow the licensing terms described here, provided that
+ * the new terms are clearly indicated on the first page of each file where
+ * they apply.
+ */
+#include "glue.h"
+
+/*
+ * close -- We don't need to do anything, but pretend we did.
+ */
+int
+_DEFUN (_close ,(fd),
+ int fd)
+{
+ return (0);
+}
--- /dev/null
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.12.1
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval "$ac_prev=\$ac_option"
+ ac_prev=
+ continue
+ fi
+
+ case "$ac_option" in
+ -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+ *) ac_optarg= ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case "$ac_option" in
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir="$ac_optarg" ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build="$ac_optarg" ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file="$ac_optarg" ;;
+
+ -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+ | --da=*)
+ datadir="$ac_optarg" ;;
+
+ -disable-* | --disable-*)
+ ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+ { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+ fi
+ ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+ eval "enable_${ac_feature}=no" ;;
+
+ -enable-* | --enable-*)
+ ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+ { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+ fi
+ ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+ case "$ac_option" in
+ *=*) ;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix="$ac_optarg" ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he)
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+ --cache-file=FILE cache test results in FILE
+ --help print this message
+ --no-create do not create output files
+ --quiet, --silent do not print \`checking...' messages
+ --version print the version of autoconf that created configure
+Directory and file names:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [same as prefix]
+ --bindir=DIR user executables in DIR [EPREFIX/bin]
+ --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
+ --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
+ --datadir=DIR read-only architecture-independent data in DIR
+ [PREFIX/share]
+ --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data in DIR
+ [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
+ --libdir=DIR object code libraries in DIR [EPREFIX/lib]
+ --includedir=DIR C header files in DIR [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
+ --infodir=DIR info documentation in DIR [PREFIX/info]
+ --mandir=DIR man documentation in DIR [PREFIX/man]
+ --srcdir=DIR find the sources in DIR [configure dir or ..]
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM
+ run sed PROGRAM on installed program names
+EOF
+ cat << EOF
+Host type:
+ --build=BUILD configure for building on BUILD [BUILD=HOST]
+ --host=HOST configure for HOST [guessed]
+ --target=TARGET configure for TARGET [TARGET=HOST]
+Features and packages:
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --x-includes=DIR X include files are in DIR
+ --x-libraries=DIR X library files are in DIR
+EOF
+ if test -n "$ac_help"; then
+ echo "--enable and --with options recognized:$ac_help"
+ fi
+ exit 0 ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host="$ac_optarg" ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir="$ac_optarg" ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir="$ac_optarg" ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir="$ac_optarg" ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir="$ac_optarg" ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst \
+ | --locals | --local | --loca | --loc | --lo)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+ localstatedir="$ac_optarg" ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir="$ac_optarg" ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir="$ac_optarg" ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix="$ac_optarg" ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix="$ac_optarg" ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix="$ac_optarg" ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name="$ac_optarg" ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir="$ac_optarg" ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir="$ac_optarg" ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site="$ac_optarg" ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir="$ac_optarg" ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir="$ac_optarg" ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target="$ac_optarg" ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers)
+ echo "configure generated by autoconf version 2.12.1"
+ exit 0 ;;
+
+ -with-* | --with-*)
+ ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+ { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+ fi
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ case "$ac_option" in
+ *=*) ;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "with_${ac_package}='$ac_optarg'" ;;
+
+ -without-* | --without-*)
+ ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+ { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+ fi
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ eval "with_${ac_package}=no" ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes="$ac_optarg" ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries="$ac_optarg" ;;
+
+ -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+ ;;
+
+ *)
+ if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+ echo "configure: warning: $ac_option: invalid host type" 1>&2
+ fi
+ if test "x$nonopt" != xNONE; then
+ { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+ fi
+ nonopt="$ac_option"
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+ exec 6>/dev/null
+else
+ exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+ case "$ac_arg" in
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c) ;;
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+ ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+ esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set. These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=crt0.s
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then its parent.
+ ac_prog=$0
+ ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+ test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+ srcdir=$ac_confdir
+ if test ! -r $srcdir/$ac_unique_file; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+ if test "$ac_srcdir_defaulted" = yes; then
+ { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+ else
+ { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+ fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
+fi
+for ac_site_file in $CONFIG_SITE; do
+ if test -r "$ac_site_file"; then
+ echo "loading site script $ac_site_file"
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ echo "loading cache $cache_file"
+ . $cache_file
+else
+ echo "creating cache $cache_file"
+ > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+ # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+ if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+ ac_n= ac_c='
+' ac_t=' '
+ else
+ ac_n=-n ac_c= ac_t=
+ fi
+else
+ ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+ac_aux_dir=
+for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+# configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+# same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+# as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:571: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+ case $nonopt in
+ NONE)
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+ fi ;;
+ *) host_alias=$nonopt ;;
+ esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:592: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+ case $nonopt in
+ NONE) target_alias=$host_alias ;;
+ *) target_alias=$nonopt ;;
+ esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:610: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+
+if test "$program_transform_name" = s,x,x,; then
+ program_transform_name=
+else
+ # Double any \ or $. echo might interpret backslashes.
+ cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+ program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+ rm -f conftestsed
+fi
+test "$program_prefix" != NONE &&
+ program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+
+
+if test "$srcdir" = "." ; then
+ mdir=`echo "${with_multisubdir}/" \
+ | sed -e 's,\([^/][^/]*\),..,g' -e 's,^/$,,'`
+ ac_aux_dir=
+for ac_dir in ${mdir}../../.. $srcdir/${mdir}../../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { echo "configure: error: can not find install-sh or install.sh in ${mdir}../../.. $srcdir/${mdir}../../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+else
+ ac_aux_dir=
+for ac_dir in ${srcdir}/../.. $srcdir/${srcdir}/../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { echo "configure: error: can not find install-sh or install.sh in ${srcdir}/../.. $srcdir/${srcdir}/../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+fi
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:708: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+# FIXME: We temporarily define our own version of AC_PROG_CC. This is
+# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We
+# are probably using a cross compiler, which will not be able to fully
+# link an executable. This should really be fixed in autoconf
+# itself.
+
+
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:770: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="gcc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:799: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ ac_prog_rejected=no
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# -gt 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ set dummy "$ac_dir/$ac_word" "$@"
+ shift
+ ac_cv_prog_CC="$@"
+ fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:847: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:856: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gcc=yes
+else
+ ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+ ac_test_CFLAGS="${CFLAGS+set}"
+ ac_save_CFLAGS="$CFLAGS"
+ CFLAGS=
+ echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:871: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+ ac_cv_prog_cc_g=yes
+else
+ ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+ if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+ elif test $ac_cv_prog_cc_g = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-O2"
+ fi
+else
+ GCC=
+ test "${CFLAGS+set}" = set || CFLAGS="-g"
+fi
+
+AS=${AS-as}
+
+AR=${AR-ar}
+
+LD=${LD-ld}
+
+# Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:907: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
+ for ac_dir in $PATH; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+host_makefile_frag=${srcdir}/../config/default.mh
+
+host_makefile_frag_path=$host_makefile_frag
+
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+ case "\$ac_option" in
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+ exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+ -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+ echo "$CONFIG_STATUS generated by autoconf version 2.12.1"
+ exit 0 ;;
+ -help | --help | --hel | --he | --h)
+ echo "\$ac_cs_usage"; exit 0 ;;
+ *) echo "\$ac_cs_usage"; exit 1 ;;
+ esac
+done
+
+ac_given_srcdir=$srcdir
+ac_given_INSTALL="$INSTALL"
+
+trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@target@%$target%g
+s%@target_alias@%$target_alias%g
+s%@target_cpu@%$target_cpu%g
+s%@target_vendor@%$target_vendor%g
+s%@target_os@%$target_os%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@CC@%$CC%g
+s%@AS@%$AS%g
+s%@AR@%$AR%g
+s%@LD@%$LD%g
+s%@RANLIB@%$RANLIB%g
+s%@host_makefile_frag_path@%$host_makefile_frag_path%g
+/@host_makefile_frag@/r $host_makefile_frag
+s%@host_makefile_frag@%%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+ if test $ac_beg -gt 1; then
+ sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+ else
+ sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+ fi
+ if test ! -s conftest.s$ac_file; then
+ ac_more_lines=false
+ rm -f conftest.s$ac_file
+ else
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds="sed -f conftest.s$ac_file"
+ else
+ ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+ fi
+ ac_file=`expr $ac_file + 1`
+ ac_beg=$ac_end
+ ac_end=`expr $ac_end + $ac_max_sed_cmds`
+ fi
+done
+if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ case "$ac_file" in
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ *) ac_file_in="${ac_file}.in" ;;
+ esac
+
+ # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+ # Remove last slash and all that follows it. Not all systems have dirname.
+ ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+ if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+ # The file is in a subdirectory.
+ test ! -d "$ac_dir" && mkdir "$ac_dir"
+ ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+ else
+ ac_dir_suffix= ac_dots=
+ fi
+
+ case "$ac_given_srcdir" in
+ .) srcdir=.
+ if test -z "$ac_dots"; then top_srcdir=.
+ else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+ /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+ *) # Relative path.
+ srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+ top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+
+ case "$ac_given_INSTALL" in
+ [/$]*) INSTALL="$ac_given_INSTALL" ;;
+ *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+ esac
+
+ echo creating "$ac_file"
+ rm -f "$ac_file"
+ configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+ case "$ac_file" in
+ *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+ *) ac_comsub= ;;
+ esac
+
+ ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+ sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+s%@INSTALL@%$INSTALL%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
--- /dev/null
+dnl Process this file with autoconf to produce a configure script.
+AC_PREREQ(2.5)dnl
+AC_INIT(crt0.s)
+
+AC_CANONICAL_SYSTEM
+AC_ARG_PROGRAM
+
+if test "$srcdir" = "." ; then
+ mdir=`echo "${with_multisubdir}/" \
+ | sed -e 's,\([[^/]][[^/]]*\),..,g' -e 's,^/$,,'`
+ AC_CONFIG_AUX_DIR(${mdir}../../..)
+else
+ AC_CONFIG_AUX_DIR(${srcdir}/../..)
+fi
+
+AC_PROG_INSTALL
+
+# FIXME: We temporarily define our own version of AC_PROG_CC. This is
+# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We
+# are probably using a cross compiler, which will not be able to fully
+# link an executable. This should really be fixed in autoconf
+# itself.
+
+AC_DEFUN(LIB_AC_PROG_CC,
+[AC_BEFORE([$0], [AC_PROG_CPP])dnl
+AC_CHECK_PROG(CC, gcc, gcc)
+if test -z "$CC"; then
+ AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
+ test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
+fi
+
+AC_PROG_CC_GNU
+
+if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+dnl Check whether -g works, even if CFLAGS is set, in case the package
+dnl plays around with CFLAGS (such as to build both debugging and
+dnl normal versions of a library), tasteless as that idea is.
+ ac_test_CFLAGS="${CFLAGS+set}"
+ ac_save_CFLAGS="$CFLAGS"
+ CFLAGS=
+ AC_PROG_CC_G
+ if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+ elif test $ac_cv_prog_cc_g = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-O2"
+ fi
+else
+ GCC=
+ test "${CFLAGS+set}" = set || CFLAGS="-g"
+fi
+])
+
+LIB_AC_PROG_CC
+AS=${AS-as}
+AC_SUBST(AS)
+AR=${AR-ar}
+AC_SUBST(AR)
+LD=${LD-ld}
+AC_SUBST(LD)
+AC_PROG_RANLIB
+
+host_makefile_frag=${srcdir}/../config/default.mh
+
+dnl We have to assign the same value to other variables because autoconf
+dnl doesn't provide a mechanism to substitute a replacement keyword with
+dnl arbitrary data or pathnames.
+dnl
+host_makefile_frag_path=$host_makefile_frag
+AC_SUBST(host_makefile_frag_path)
+AC_SUBST_FILE(host_makefile_frag)
+
+AC_OUTPUT(Makefile)
--- /dev/null
+# XSTORMY16 startup code
+
+# Interrupt vectors at 0x8000.
+ .section .int_vec,"ax"
+ .global _start
+ .align 1
+_start:
+ ;; Reset, watchdog timer interrupt
+ jmpf _int_reset
+ ;; base timer interrupt
+ jmpf _int_basetimer
+ ;; timer 0
+ jmpf _int_timer0
+ ;; timer 1
+ jmpf _int_timer1
+ ;; SIO0 interrupt
+ jmpf _int_sio0
+ ;; SIO1 interrupt
+ jmpf _int_sio1
+ ;; port0 interrupt
+ jmpf _int_port0
+ ;; port1 interrupt
+ jmpf _int_port1
+
+ .text
+# Reset code, set up memory and call main.
+_int_reset:
+ ;; Set up the stack pointer.
+ mov r0,#__stack
+ bz r0,#0,0f
+ mov sp,r0
+0:
+ ;; Zero the data space
+ mov r0,#_edata
+ mov r1,#_end
+ mov r2,#0
+0: mov.w (r0++),r2
+ blt r0,r1,0b
+ ;; Call hardware init routine
+ callf _hwinit
+ ;; Call initialization routines
+ callf _init
+ ;; Set up fini routines to be called from exit
+ mov r2,#@fptr(_fini)
+ callf atexit
+ ;; Call main() with empty argc/argv/envp
+ mov r2,#0
+ mov r3,#0
+ mov r4,#0
+ callf main
+ ;; Exit.
+ callf exit
+ ;; Should never reach this code.
+ halt
+1: .size _int_reset,1b-_int_reset
+
+# Stub interrupt routines.
+ .globl _int_timer0
+ .weak _int_timer0
+ .globl _int_timer1
+ .weak _int_timer1
+ .globl _int_sio0
+ .weak _int_sio0
+ .globl _int_sio1
+ .weak _int_sio1
+ .globl _int_port0
+ .weak _int_port0
+ .globl _int_port1
+ .weak _int_port1
+ .globl _int_basetimer
+ .weak _int_basetimer
+_int_timer0:
+_int_timer1:
+_int_sio0:
+_int_sio1:
+_int_port0:
+_int_port1:
+_int_basetimer:
+ iret
+1: .size _int_timer0,1b-_int_timer0
+
+# Stub hardware init
+ .globl _hwinit
+ .weak _hwinit
+_hwinit:
+ ret
+1: .size _int_hwinit,1b-_int_hwinit
+
+# The first word in .data has address 0, so it's not a good
+# idea to use it as its address conflicts with NULL.
+# Place a HALT instruction there to try to catch NULL pointer
+# dereferences.
+ .data
+ halt
--- /dev/null
+# XSTORMY16 startup code for GDB stub.
+
+# CPU Data for Sanyo EVA debugger at 0x7F00
+ .section .cpudata,"ax"
+ .byte 0x00,0x02,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+ .byte 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+ .byte 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+ .byte 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+ .byte 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+ .byte 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+ .byte 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+ .byte 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+ .byte 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+ .byte 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+ .byte 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+ .byte 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+ .byte 0x44,0x35,0x39,0x52,0x30,0x30,0x30,0x30,0x2E,0x4F,0x50,0x54,0x00,0x00,0x00,0x00
+ .byte 0x4c,0x43,0x35,0x39,0x52,0x30,0x30,0x30,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00
+ .byte 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x80,0x00,0x20,0x48,0x00,0x00,0x00
+ .byte 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x20,0x01,0x12,0x31,0x23,0x59
+
+# Interrupt vectors at 0x8000.
+ .section .int_vec,"ax"
+ .global _start
+ .align 1
+_start:
+ ;; Reset, watchdog timer interrupt
+ jmpf _int_reset
+ ;; base timer interrupt
+ jmpf _int_basetimer
+ ;; timer 0
+ jmpf _int_timer0
+ ;; timer 1
+ jmpf _int_timer1
+ ;; SIO0 interrupt
+ jmpf _int_sio0
+ ;; SIO1 interrupt
+ jmpf _int_sio1
+ ;; port0 interrupt
+ jmpf _int_port0
+ ;; port1 interrupt
+ jmpf _int_port1
+
+ .org 0x80
+ ;; sys interrupt (0x8080)
+ jmpf _int_sys
+
+ ;; Application void write(char *buf, int nbytes)
+ ;; This jmps to a stub function to packetize the buf for GDB
+ jmpf gdb_write
+ ;; Application int read(char *buf, int nbytes)
+ jmpf gdb_read
+
+ .text
+# Reset code, set up memory and call main.
+_int_reset:
+ ;; Set up the application stack pointer.
+ mov sp,#0x002
+
+ ;; Zero the data space
+ mov r0,#_edata
+ mov r1,#_end
+ mov r2,#0
+0: mov.w (r0++),r2
+ blt r0,r1,0b
+
+ ;; Init the UART
+ callf uart_init
+
+ ;; Turn on illegal insn trap
+ mov r0,r14
+ set1 r0,#11
+ mov r14,r0
+ mov.b 0x7f08,#0x11
+ mov.b 0x7f09,#0x10
+
+ ;; "breakpoint" sends us into stub.
+0:
+ .hword 0x0006
+ br 0b
+
+1: .size _int_reset,1b-_int_reset
+
+# Stub interrupt routines.
+ .globl _int_timer0
+ .weak _int_timer0
+ .globl _int_timer1
+ .weak _int_timer1
+ .globl _int_sio0
+ .weak _int_sio0
+ .globl _int_sio1
+ .weak _int_sio1
+ .globl _int_port0
+ .weak _int_port0
+ .globl _int_port1
+ .weak _int_port1
+ .globl _int_basetimer
+ .weak _int_basetimer
+_int_timer0:
+_int_timer1:
+_int_sio0:
+_int_sio1:
+_int_port0:
+_int_port1:
+_int_basetimer:
+ iret
+1: .size _int_timer0,1b-_int_timer0
+
+_int_sys:
+ push r13
+ mov r13,#registers
+ mov.w (r13++),r0
+ mov.w (r13++),r1
+ mov.w (r13++),r2
+ mov.w (r13++),r3
+ mov.w (r13++),r4
+ mov.w (r13++),r5
+ mov.w (r13++),r6
+ mov.w (r13++),r7
+ mov r0,r8
+ mov.w (r13++),r0
+ mov r0,r9
+ mov.w (r13++),r0
+ mov r0,r10
+ mov.w (r13++),r0
+ mov r0,r11
+ mov.w (r13++),r0
+ mov r0,r12
+ mov.w (r13++),r0
+ pop r0
+ mov.w (r13++),r0 ; R13
+ pop r0
+ mov.w (r13++),r0 ; PSW
+ mov r0,r15
+ sub r0,#4
+ mov.w (r13++),r0 ; SP
+ pop r0
+ pop r1
+ mov.w (r13++),r1 ; PCL
+ mov.w (r13++),r0 ; PCH
+
+ ;; switch to stub stack and invoke stub
+ mov sp,#0x700
+ callf handle_exception
+
+ mov r0,#registers+34
+ mov.w r1,(r0) ; PCH
+ mov.w r2,(--r0) ; PCL
+ mov.w r3,(--r0) ; SP
+ mov r15,r3
+ push r2
+ push r1
+ mov.w r1,(--r0) ; PSW
+ push r1
+ mov.w r1,(--r0)
+ mov r13,r1
+ mov.w r1,(--r0)
+ mov r12,r1
+ mov.w r1,(--r0)
+ mov r11,r1
+ mov.w r1,(--r0)
+ mov r10,r1
+ mov.w r1,(--r0)
+ mov r9,r1
+ mov.w r1,(--r0)
+ mov r8,r1
+ mov.w r7,(--r0)
+ mov.w r6,(--r0)
+ mov.w r5,(--r0)
+ mov.w r4,(--r0)
+ mov.w r3,(--r0)
+ mov.w r2,(--r0)
+ mov.w r1,(--r0)
+ mov.w r0,(--r0)
+ iret
+1: .size _int_sys,1b-_int_sys
+
+
--- /dev/null
+ .section .init,"ax"
+ .align 1
+ .globl _init
+_init:
+
+ .section .fini,"ax"
+ .align 1
+ .globl _fini
+_fini:
--- /dev/null
+ .section .init,"ax"
+ ret
+
+ .section .fini,"ax"
+ ret
--- /dev/null
+/* eva_app.c -- Glue code for linking apps to run under GDB debugger control.
+ *
+ * Copyright (c) 2001 Red Hat, Inc.
+ *
+ * The authors hereby grant permission to use, copy, modify, distribute,
+ * and license this software and its documentation for any purpose, provided
+ * that existing copyright notices are retained in all copies and that this
+ * notice is included verbatim in any distributions. No written agreement,
+ * license, or royalty fee is required for any of the authorized uses.
+ * Modifications to this software may be copyrighted by their authors
+ * and need not follow the licensing terms described here, provided that
+ * the new terms are clearly indicated on the first page of each file where
+ * they apply.
+ */
+#include "glue.h"
+
+typedef void (*write_proc_t)(char *buf, int nbytes);
+typedef int (*read_proc_t)(char *buf, int nbytes);
+
+/* There is no "syscall", so we just call directly into the stub code
+ at fixed addresses. */
+#define STUB_WRITE(p,n) ((write_proc_t)0x8084)((p),(n))
+#define STUB_READ(p,n) ((read_proc_t)0x8088)((p),(n))
+
+/*
+ * print -- do a raw print of a string
+ */
+void
+print(char *ptr)
+{
+ STUB_WRITE(ptr, strlen(ptr));
+}
+
+/*
+ * write -- write bytes to the serial port. Ignore fd, since
+ * stdout and stderr are the same. Since we have no filesystem,
+ * open will only return an error.
+ */
+int
+_write (int fd, char *buf, int nbytes)
+{
+ STUB_WRITE(buf, nbytes);
+ return (nbytes);
+}
+
+int
+_read (int fd, char *buf, int nbytes)
+{
+ return STUB_READ(buf, nbytes);
+}
+
+extern char _end[];
+#define HEAP_LIMIT ((char *)0xffff)
+
+void *
+_sbrk(int inc)
+{
+ static char *heap_ptr = _end;
+ void *base;
+
+ if (inc > (HEAP_LIMIT - heap_ptr))
+ return (void *)-1;
+
+ base = heap_ptr;
+ heap_ptr += inc;
+
+ return base;
+}
+
+void
+_exit(int n)
+{
+ while (1)
+ {
+ asm volatile ("nop");
+ asm volatile (".hword 0x0006"); /* breakpoint (special illegal insn) */
+ }
+}
--- /dev/null
+OUTPUT_FORMAT("elf32-xstormy16", "elf32-xstormy16",
+ "elf32-xstormy16")
+OUTPUT_ARCH(xstormy16)
+ENTRY(_start)
+GROUP(-lc -leva_app -lgcc)
+
+MEMORY
+{
+ RAM (w) : ORIGIN = 0x9000, LENGTH = 0x7000
+ ROM (!w) : ORIGIN = 0x10000, LENGTH = 0x70000
+}
+
+SECTIONS
+{
+ __stack = 2 ;
+ .data :
+ {
+ *(.data)
+ *(.data.*)
+ *(.gnu.linkonce.d.*)
+ SORT(CONSTRUCTORS)
+ } > RAM
+ /* Read-only sections */
+ .rodata : { *(.rodata) *(.rodata.*) *(.gnu.linkonce.r.*) } > RAM
+ .ctors :
+ {
+ /* gcc uses crtbegin.o to find the start of
+ the constructors, so we make sure it is
+ first. Because this is a wildcard, it
+ doesn't matter if the user does not
+ actually link against crtbegin.o; the
+ linker won't look for a file to match a
+ wildcard. The wildcard also means that it
+ doesn't matter which directory crtbegin.o
+ is in. */
+ KEEP (*crtbegin.o(.ctors))
+ /* We don't want to include the .ctor section from
+ from the crtend.o file until after the sorted ctors.
+ The .ctor section from the crtend file contains the
+ end of ctors marker and it must be last */
+ KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors))
+ KEEP (*(SORT(.ctors.*)))
+ KEEP (*(.ctors))
+ } > RAM
+ .dtors :
+ {
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors))
+ KEEP (*(SORT(.dtors.*)))
+ KEEP (*(.dtors))
+ } > RAM
+ .eh_frame : { KEEP (*(.eh_frame)) } > RAM
+ .gcc_except_table : { *(.gcc_except_table) } > RAM
+ .plt : { *(.plt) } > RAM
+ _edata = .;
+ PROVIDE (edata = .);
+ __bss_start = .;
+ .bss :
+ {
+ *(.dynbss)
+ *(.bss)
+ *(.bss.*)
+ *(.gnu.linkonce.b.*)
+ *(COMMON)
+ /* Align here to ensure that the .bss section occupies space up to
+ _end. Align after .bss to ensure correct alignment even if the
+ .bss section disappears because there are no input sections. */
+ . = ALIGN(2);
+ } > RAM
+ . = ALIGN(2);
+ _end = .;
+ PROVIDE (end = .);
+ .text :
+ {
+ *(.int_vec)
+ *(.text)
+ *(.text.*)
+ *(.stub)
+ /* .gnu.warning sections are handled specially by elf32.em. */
+ *(.gnu.warning)
+ *(.gnu.linkonce.t.*)
+ } > ROM =0
+ .init :
+ {
+ KEEP (*(.init))
+ } > ROM =0
+ .fini :
+ {
+ KEEP (*(.fini))
+ } > ROM =0
+ PROVIDE (__etext = .);
+ PROVIDE (_etext = .);
+ PROVIDE (etext = .);
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ /* DWARF debug sections.
+ Symbols in the DWARF debugging sections are relative to the beginning
+ of the section so we begin them at 0. */
+ /* DWARF 1 */
+ .debug 0 : { *(.debug) }
+ .line 0 : { *(.line) }
+ /* GNU DWARF 1 extensions */
+ .debug_srcinfo 0 : { *(.debug_srcinfo) }
+ .debug_sfnames 0 : { *(.debug_sfnames) }
+ /* DWARF 1.1 and DWARF 2 */
+ .debug_aranges 0 : { *(.debug_aranges) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ /* DWARF 2 */
+ .debug_info 0 : { *(.debug_info) *(.gnu.linkonce.wi.*) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_frame 0 : { *(.debug_frame) }
+ .debug_str 0 : { *(.debug_str) }
+ .debug_loc 0 : { *(.debug_loc) }
+ .debug_macinfo 0 : { *(.debug_macinfo) }
+ /* SGI/MIPS DWARF 2 extensions */
+ .debug_weaknames 0 : { *(.debug_weaknames) }
+ .debug_funcnames 0 : { *(.debug_funcnames) }
+ .debug_typenames 0 : { *(.debug_typenames) }
+ .debug_varnames 0 : { *(.debug_varnames) }
+ /* These must appear regardless of . */
+}
--- /dev/null
+OUTPUT_FORMAT("elf32-xstormy16", "elf32-xstormy16",
+ "elf32-xstormy16")
+OUTPUT_ARCH(xstormy16)
+ENTRY(_start)
+
+MEMORY
+{
+ CPUDATA (!w) : ORIGIN = 0x7F00, LENGTH = 0x100
+ ROM (w) : ORIGIN = 0x8000, LENGTH = 0x1000
+}
+
+SECTIONS
+{
+ /* CPU data for Sanyo debugger */
+ .cpudata : { KEEP (*(.cpudata)) } > CPUDATA
+ /* Read-only sections in ROM. */
+ .int_vec : { *(.int_vec) } > ROM
+ .rodata : { *(.rodata) *(.rodata.*) *(.gnu.linkonce.r.*) } > ROM
+ .ctors :
+ {
+ /* gcc uses crtbegin.o to find the start of
+ the constructors, so we make sure it is
+ first. Because this is a wildcard, it
+ doesn't matter if the user does not
+ actually link against crtbegin.o; the
+ linker won't look for a file to match a
+ wildcard. The wildcard also means that it
+ doesn't matter which directory crtbegin.o
+ is in. */
+ KEEP (*crtbegin.o(.ctors))
+ /* We don't want to include the .ctor section from
+ from the crtend.o file until after the sorted ctors.
+ The .ctor section from the crtend file contains the
+ end of ctors marker and it must be last */
+ KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors))
+ KEEP (*(SORT(.ctors.*)))
+ KEEP (*(.ctors))
+ } > ROM
+ .dtors :
+ {
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors))
+ KEEP (*(SORT(.dtors.*)))
+ KEEP (*(.dtors))
+ } > ROM
+ .eh_frame : { KEEP (*(.eh_frame)) } > ROM
+ .gcc_except_table : { *(.gcc_except_table) } > ROM
+ .plt : { *(.plt) } > ROM
+ .text :
+ {
+ *(.text)
+ *(.text.*)
+ *(.stub)
+ /* .gnu.warning sections are handled specially by elf32.em. */
+ *(.gnu.warning)
+ *(.gnu.linkonce.t.*)
+ } > ROM =0
+ .init :
+ {
+ KEEP (*(.init))
+ } > ROM =0
+ .fini :
+ {
+ KEEP (*(.fini))
+ } > ROM =0
+ PROVIDE (__etext = .);
+ PROVIDE (_etext = .);
+ PROVIDE (etext = .);
+ .data :
+ {
+ *(.data)
+ *(.data.*)
+ *(.gnu.linkonce.d.*)
+ SORT(CONSTRUCTORS)
+ } > ROM
+ _edata = .;
+ PROVIDE (edata = .);
+ __bss_start = .;
+ .bss :
+ {
+ *(.dynbss)
+ *(.bss)
+ *(.bss.*)
+ *(.gnu.linkonce.b.*)
+ *(COMMON)
+ /* Align here to ensure that the .bss section occupies space up to
+ _end. Align after .bss to ensure correct alignment even if the
+ .bss section disappears because there are no input sections. */
+ . = ALIGN(2);
+ } > ROM
+ . = ALIGN(2);
+ _end = .;
+ PROVIDE (end = .);
+
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ /* DWARF debug sections.
+ Symbols in the DWARF debugging sections are relative to the beginning
+ of the section so we begin them at 0. */
+ /* DWARF 1 */
+ .debug 0 : { *(.debug) }
+ .line 0 : { *(.line) }
+ /* GNU DWARF 1 extensions */
+ .debug_srcinfo 0 : { *(.debug_srcinfo) }
+ .debug_sfnames 0 : { *(.debug_sfnames) }
+ /* DWARF 1.1 and DWARF 2 */
+ .debug_aranges 0 : { *(.debug_aranges) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ /* DWARF 2 */
+ .debug_info 0 : { *(.debug_info) *(.gnu.linkonce.wi.*) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_frame 0 : { *(.debug_frame) }
+ .debug_str 0 : { *(.debug_str) }
+ .debug_loc 0 : { *(.debug_loc) }
+ .debug_macinfo 0 : { *(.debug_macinfo) }
+ /* SGI/MIPS DWARF 2 extensions */
+ .debug_weaknames 0 : { *(.debug_weaknames) }
+ .debug_funcnames 0 : { *(.debug_funcnames) }
+ .debug_typenames 0 : { *(.debug_typenames) }
+ .debug_varnames 0 : { *(.debug_varnames) }
+ /* These must appear regardless of . */
+}
--- /dev/null
+/* fstat.c -- get status of a file.
+ *
+ * Copyright (c) 1995 Cygnus Support
+ *
+ * The authors hereby grant permission to use, copy, modify, distribute,
+ * and license this software and its documentation for any purpose, provided
+ * that existing copyright notices are retained in all copies and that this
+ * notice is included verbatim in any distributions. No written agreement,
+ * license, or royalty fee is required for any of the authorized uses.
+ * Modifications to this software may be copyrighted by their authors
+ * and need not follow the licensing terms described here, provided that
+ * the new terms are clearly indicated on the first page of each file where
+ * they apply.
+ */
+#include <sys/stat.h>
+#include "glue.h"
+
+/*
+ * fstat -- Since we have no file system, we just return an error.
+ */
+int
+_DEFUN (_fstat, (fd, buf),
+ int fd _AND
+ struct stat *buf)
+{
+ buf->st_mode = S_IFCHR; /* Always pretend to be a tty */
+ buf->st_blksize = 0;
+
+ return (0);
+}
--- /dev/null
+/* getpid.c -- get the current process id.
+ *
+ * Copyright (c) 1995 Cygnus Support
+ *
+ * The authors hereby grant permission to use, copy, modify, distribute,
+ * and license this software and its documentation for any purpose, provided
+ * that existing copyright notices are retained in all copies and that this
+ * notice is included verbatim in any distributions. No written agreement,
+ * license, or royalty fee is required for any of the authorized uses.
+ * Modifications to this software may be copyrighted by their authors
+ * and need not follow the licensing terms described here, provided that
+ * the new terms are clearly indicated on the first page of each file where
+ * they apply.
+ */
+#include "glue.h"
+
+/*
+ * getpid -- only one process, so just return 1.
+ */
+int
+_DEFUN (_getpid, (),
+ )
+{
+ return __MYPID;
+}
--- /dev/null
+/* kill.c -- remove a process.
+ *
+ * Copyright (c) 1995 Cygnus Support
+ *
+ * The authors hereby grant permission to use, copy, modify, distribute,
+ * and license this software and its documentation for any purpose, provided
+ * that existing copyright notices are retained in all copies and that this
+ * notice is included verbatim in any distributions. No written agreement,
+ * license, or royalty fee is required for any of the authorized uses.
+ * Modifications to this software may be copyrighted by their authors
+ * and need not follow the licensing terms described here, provided that
+ * the new terms are clearly indicated on the first page of each file where
+ * they apply.
+ */
+#include "glue.h"
+
+/*
+ * kill -- go out via exit...
+ */
+int
+_DEFUN (_kill, (pid, sig),
+ int pid _AND
+ int sig)
+{
+ if(pid == __MYPID)
+ _exit(sig);
+ return 0;
+}
--- /dev/null
+/* lseek.c -- move read/write pointer.
+ *
+ * Copyright (c) 1995 Cygnus Support
+ *
+ * The authors hereby grant permission to use, copy, modify, distribute,
+ * and license this software and its documentation for any purpose, provided
+ * that existing copyright notices are retained in all copies and that this
+ * notice is included verbatim in any distributions. No written agreement,
+ * license, or royalty fee is required for any of the authorized uses.
+ * Modifications to this software may be copyrighted by their authors
+ * and need not follow the licensing terms described here, provided that
+ * the new terms are clearly indicated on the first page of each file where
+ * they apply.
+ */
+#include <sys/types.h>
+#include <errno.h>
+#include "glue.h"
+
+/*
+ * lseek -- Since a serial port is non-seekable, we return an error.
+ */
+off_t
+_DEFUN (_lseek, (fd, offset, whence),
+ int fd _AND
+ off_t offset _AND
+ int whence)
+{
+ errno = ESPIPE;
+ return ((off_t)-1);
+}
+
--- /dev/null
+/* open.c -- open a file.
+ *
+ * Copyright (c) 1995 Cygnus Support
+ *
+ * The authors hereby grant permission to use, copy, modify, distribute,
+ * and license this software and its documentation for any purpose, provided
+ * that existing copyright notices are retained in all copies and that this
+ * notice is included verbatim in any distributions. No written agreement,
+ * license, or royalty fee is required for any of the authorized uses.
+ * Modifications to this software may be copyrighted by their authors
+ * and need not follow the licensing terms described here, provided that
+ * the new terms are clearly indicated on the first page of each file where
+ * they apply.
+ */
+#include <errno.h>
+#include "glue.h"
+
+/*
+ * open -- open a file descriptor. We don't have a filesystem, so
+ * we return an error.
+ */
+int
+_DEFUN (_open, (buf, flags, mode),
+ const char *buf _AND
+ int flags _AND
+ int mode)
+{
+ errno = EIO;
+ return (-1);
+}
+
--- /dev/null
+/* sbrk.c -- allocate memory dynamically.
+ *
+ * Copyright (c) 1995,1996 Cygnus Support
+ *
+ * The authors hereby grant permission to use, copy, modify, distribute,
+ * and license this software and its documentation for any purpose, provided
+ * that existing copyright notices are retained in all copies and that this
+ * notice is included verbatim in any distributions. No written agreement,
+ * license, or royalty fee is required for any of the authorized uses.
+ * Modifications to this software may be copyrighted by their authors
+ * and need not follow the licensing terms described here, provided that
+ * the new terms are clearly indicated on the first page of each file where
+ * they apply.
+ */
+#include <errno.h>
+#include "glue.h"
+
+/* just in case, most boards have at least some memory */
+#ifndef RAMSIZE
+# define RAMSIZE (caddr_t)0x100000
+#endif
+
+char *heap_ptr;
+
+/*
+ * sbrk -- changes heap size size. Get nbytes more
+ * RAM. We just increment a pointer in what's
+ * left of memory on the board.
+ */
+char *
+_sbrk (nbytes)
+ int nbytes;
+{
+ char *base;
+
+ if (!heap_ptr)
+ heap_ptr = (char *)&_end;
+ base = heap_ptr;
+ heap_ptr += nbytes;
+
+ return base;
+/* FIXME: We really want to make sure we don't run out of RAM, but this
+ * isn't very portable.
+ */
+#if 0
+ if ((RAMSIZE - heap_ptr - nbytes) >= 0) {
+ base = heap_ptr;
+ heap_ptr += nbytes;
+ return (base);
+ } else {
+ errno = ENOMEM;
+ return ((char *)-1);
+ }
+#endif
+}
--- /dev/null
+/* A modified version of the basic linker script, for testing purposes,
+ which puts all code above 0x10000. */
+OUTPUT_FORMAT("elf32-xstormy16", "elf32-xstormy16",
+ "elf32-xstormy16")
+OUTPUT_ARCH(xstormy16)
+ENTRY(_start)
+ SEARCH_DIR(/es/scratch/geoffk/objs/mainline-sX/H-i686-pc-linux-gnulibc2.2/xstormy16-elf/lib);
+/* There are two memory regions we care about, one from 0 through 0x7F00
+ that is RAM and one from 0x8000 up which is ROM. */
+MEMORY
+{
+ RAM (w) : ORIGIN = 0, LENGTH = 0x7F00
+ LOROM (!w) : ORIGIN = 0x8000, LENGTH = 0x8000
+ HIROM (!w) : ORIGIN = 0x10000, LENGTH = 0xFF0000
+}
+SECTIONS
+{
+ .data :
+ {
+ *(.data)
+ *(.data.*)
+ *(.gnu.linkonce.d.*)
+ SORT(CONSTRUCTORS)
+ } > RAM
+ _edata = .;
+ PROVIDE (edata = .);
+ __bss_start = .;
+ .bss :
+ {
+ *(.dynbss)
+ *(.bss)
+ *(.bss.*)
+ *(.gnu.linkonce.b.*)
+ *(COMMON)
+ /* Align here to ensure that the .bss section occupies space up to
+ _end. Align after .bss to ensure correct alignment even if the
+ .bss section disappears because there are no input sections. */
+ . = ALIGN(2);
+ } > RAM
+ . = ALIGN(2);
+ __stack = .;
+ . = . + 4096;
+ _end = .;
+ PROVIDE (end = .);
+ /* Read-only sections in ROM. */
+ .int_vec : { *(.int_vec) } > LOROM
+ .rodata : { *(.rodata) *(.rodata.*) *(.gnu.linkonce.r.*) } > LOROM
+ .ctors :
+ {
+ /* gcc uses crtbegin.o to find the start of
+ the constructors, so we make sure it is
+ first. Because this is a wildcard, it
+ doesn't matter if the user does not
+ actually link against crtbegin.o; the
+ linker won't look for a file to match a
+ wildcard. The wildcard also means that it
+ doesn't matter which directory crtbegin.o
+ is in. */
+ KEEP (*crtbegin.o(.ctors))
+ /* We don't want to include the .ctor section from
+ from the crtend.o file until after the sorted ctors.
+ The .ctor section from the crtend file contains the
+ end of ctors marker and it must be last */
+ KEEP (*(EXCLUDE_FILE (*crtend.o ) .ctors))
+ KEEP (*(SORT(.ctors.*)))
+ KEEP (*(.ctors))
+ } > LOROM
+ .dtors :
+ {
+ KEEP (*crtbegin.o(.dtors))
+ KEEP (*(EXCLUDE_FILE (*crtend.o ) .dtors))
+ KEEP (*(SORT(.dtors.*)))
+ KEEP (*(.dtors))
+ } > LOROM
+ .eh_frame : { KEEP (*(.eh_frame)) } > LOROM
+ .gcc_except_table : { *(.gcc_except_table) } > LOROM
+ .plt : { *(.plt) } > LOROM
+ .text :
+ {
+ *(.text)
+ *(.text.*)
+ *(.stub)
+ /* .gnu.warning sections are handled specially by elf32.em. */
+ *(.gnu.warning)
+ *(.gnu.linkonce.t.*)
+ } > HIROM =0
+ .init :
+ {
+ KEEP (*(.init))
+ } > HIROM =0
+ .fini :
+ {
+ KEEP (*(.fini))
+ } > HIROM =0
+ PROVIDE (__etext = .);
+ PROVIDE (_etext = .);
+ PROVIDE (etext = .);
+ /* Stabs debugging sections. */
+ .stab 0 : { *(.stab) }
+ .stabstr 0 : { *(.stabstr) }
+ .stab.excl 0 : { *(.stab.excl) }
+ .stab.exclstr 0 : { *(.stab.exclstr) }
+ .stab.index 0 : { *(.stab.index) }
+ .stab.indexstr 0 : { *(.stab.indexstr) }
+ .comment 0 : { *(.comment) }
+ /* DWARF debug sections.
+ Symbols in the DWARF debugging sections are relative to the beginning
+ of the section so we begin them at 0. */
+ /* DWARF 1 */
+ .debug 0 : { *(.debug) }
+ .line 0 : { *(.line) }
+ /* GNU DWARF 1 extensions */
+ .debug_srcinfo 0 : { *(.debug_srcinfo) }
+ .debug_sfnames 0 : { *(.debug_sfnames) }
+ /* DWARF 1.1 and DWARF 2 */
+ .debug_aranges 0 : { *(.debug_aranges) }
+ .debug_pubnames 0 : { *(.debug_pubnames) }
+ /* DWARF 2 */
+ .debug_info 0 : { *(.debug_info) *(.gnu.linkonce.wi.*) }
+ .debug_abbrev 0 : { *(.debug_abbrev) }
+ .debug_line 0 : { *(.debug_line) }
+ .debug_frame 0 : { *(.debug_frame) }
+ .debug_str 0 : { *(.debug_str) }
+ .debug_loc 0 : { *(.debug_loc) }
+ .debug_macinfo 0 : { *(.debug_macinfo) }
+ /* SGI/MIPS DWARF 2 extensions */
+ .debug_weaknames 0 : { *(.debug_weaknames) }
+ .debug_funcnames 0 : { *(.debug_funcnames) }
+ .debug_typenames 0 : { *(.debug_typenames) }
+ .debug_varnames 0 : { *(.debug_varnames) }
+ /* These must appear regardless of . */
+}
--- /dev/null
+/* stat.c -- Get the status of a file.
+ *
+ * Copyright (c) 1995 Cygnus Support
+ *
+ * The authors hereby grant permission to use, copy, modify, distribute,
+ * and license this software and its documentation for any purpose, provided
+ * that existing copyright notices are retained in all copies and that this
+ * notice is included verbatim in any distributions. No written agreement,
+ * license, or royalty fee is required for any of the authorized uses.
+ * Modifications to this software may be copyrighted by their authors
+ * and need not follow the licensing terms described here, provided that
+ * the new terms are clearly indicated on the first page of each file where
+ * they apply.
+ */
+#include <sys/stat.h>
+#include <errno.h>
+#include "glue.h"
+
+/*
+ * stat -- Since we have no file system, we just return an error.
+ */
+int
+_DEFUN (_stat, (path, buf),
+ const char *path _AND
+ struct stat *buf)
+{
+ errno = EIO;
+ return (-1);
+}
+
--- /dev/null
+# xstormy16 system calls for the simulator
+
+#include <syscall.h>
+
+ .text
+
+ .globl _exit
+_exit:
+ mov r1,#SYS_exit
+ .hword 0x0001
+ bnz r1,#0,syscall_error
+ ret
+0: .size exit,0b-_exit
+
+ .globl _open
+_open:
+ mov r1,#SYS_open
+ .hword 0x0001
+ bnz r1,#0,syscall_error
+ ret
+0: .size open,0b-_open
+
+ .globl _close
+_close:
+ mov r1,#SYS_close
+ .hword 0x0001
+ bnz r1,#0,syscall_error
+ ret
+0: .size close,0b-_close
+
+ .globl _read
+_read:
+ mov r1,#SYS_read
+ .hword 0x0001
+ bnz r1,#0,syscall_error
+ ret
+0: .size read,0b-_read
+
+ .globl _write
+_write:
+ mov r1,#SYS_write
+ .hword 0x0001
+ bnz r1,#0,syscall_error
+ ret
+0: .size write,0b-_write
+
+ .globl _lseek
+_lseek:
+ mov r1,#SYS_lseek
+ .hword 0x0001
+ bnz r1,#0,syscall_error
+ ret
+0: .size lseek,0b-_lseek
+
+ .globl _unlink
+_unlink:
+ mov r1,#SYS_unlink
+ .hword 0x0001
+ bnz r1,#0,syscall_error
+ ret
+0: .size unlink,0b-_unlink
+
+ .globl _getpid
+_getpid:
+ mov r1,#SYS_getpid
+ .hword 0x0001
+ bnz r1,#0,syscall_error
+ ret
+0: .size getpid,0b-_getpid
+
+ .globl _kill
+_kill:
+ mov r1,#SYS_kill
+ .hword 0x0001
+ bnz r1,#0,syscall_error
+ ret
+0: .size kill,0b-_kill
+
+ .globl _fstat
+_fstat:
+ mov r1,#SYS_fstat
+ .hword 0x0001
+ bnz r1,#0,syscall_error
+ ret
+0: .size fstat,0b-_fstat
+
+ .globl _chdir
+_chdir:
+ mov r1,#SYS_chdir
+ .hword 0x0001
+ bnz r1,#0,syscall_error
+ ret
+0: .size chdir,0b-_chdir
+
+ .globl _stat
+_stat:
+ mov r1,#SYS_stat
+ .hword 0x0001
+ bnz r1,#0,syscall_error
+ ret
+0: .size stat,0b-_stat
+
+ .globl _chmod
+_chmod:
+ mov r1,#SYS_chmod
+ .hword 0x0001
+ bnz r1,#0,syscall_error
+ ret
+0: .size chmod,0b-_chmod
+
+ .globl _utime
+_utime:
+ mov r1,#SYS_utime
+ .hword 0x0001
+ bnz r1,#0,syscall_error
+ ret
+0: .size utime,0b-_utime
+
+ .globl _time
+_time:
+ mov r1,#SYS_time
+ .hword 0x0001
+ bnz r1,#0,syscall_error
+ ret
+0: .size time,0b-_time
+
+ .globl _gettimeofday
+_gettimeofday:
+ mov r1,#SYS_gettimeofday
+ .hword 0x0001
+ bnz r1,#0,syscall_error
+ ret
+0: .size gettimeofday,0b-_gettimeofday
+
+ .globl _times
+_times:
+ mov r1,#SYS_times
+ .hword 0x0001
+ bnz r1,#0,syscall_error
+ ret
+0: .size times,0b-_times
+
+ .globl _link
+_link:
+ mov r1,#SYS_link
+ .hword 0x0001
+ bnz r1,#0,syscall_error
+ ret
+0: .size link,0b-_link
+
+syscall_error:
+# Return value for the syscall is in r2. Save it here, as
+# _errno will overwrite it with the address of the errno
+# variable. r0 is the errno.
+ push r2
+ push r0
+ callf __errno
+ pop r0
+ mov.w (r2),r0
+ pop r2
+ ret
+0: .size syscall_error,0b-syscall_error
--- /dev/null
+# xstormy16 system calls for the simulator
+
+#include <syscall.h>
+
+ .text
+
+define(`syscall',`.globl _`'$1
+_`'$1`':
+ mov r1,#SYS_$1
+ .hword 0x0001
+ bnz r1,#0,syscall_error
+ ret
+0: .size $1,0b-_$1
+')dnl
+ syscall(exit)
+ syscall(open)
+ syscall(close)
+ syscall(read)
+ syscall(write)
+ syscall(lseek)
+ syscall(unlink)
+ syscall(getpid)
+ syscall(kill)
+ syscall(fstat)
+ syscall(chdir)
+ syscall(stat)
+ syscall(chmod)
+ syscall(utime)
+ syscall(time)
+ syscall(gettimeofday)
+ syscall(times)
+ syscall(link)
+dnl
+syscall_error:
+ push r0
+ callf __errno
+ pop r0
+ mov.w (r2),r0
+ ret
+0: .size syscall_error,0b-syscall_error
--- /dev/null
+/* unlink.c -- remove a file.
+ *
+ * Copyright (c) 1995 Cygnus Support
+ *
+ * The authors hereby grant permission to use, copy, modify, distribute,
+ * and license this software and its documentation for any purpose, provided
+ * that existing copyright notices are retained in all copies and that this
+ * notice is included verbatim in any distributions. No written agreement,
+ * license, or royalty fee is required for any of the authorized uses.
+ * Modifications to this software may be copyrighted by their authors
+ * and need not follow the licensing terms described here, provided that
+ * the new terms are clearly indicated on the first page of each file where
+ * they apply.
+ */
+#include <errno.h>
+#include "glue.h"
+
+/*
+ * unlink -- since we have no file system,
+ * we just return an error.
+ */
+int
+_DEFUN (_unlink, (path),
+ char * path)
+{
+ errno = EIO;
+ return (-1);
+}
--- /dev/null
+/****************************************************************************
+
+ THIS SOFTWARE IS NOT COPYRIGHTED
+
+ HP offers the following for use in the public domain. HP makes no
+ warranty with regard to the software or it's performance and the
+ user accepts the software "AS IS" with all faults.
+
+ HP DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WITH REGARD
+ TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+****************************************************************************/
+
+/****************************************************************************
+ * Header: remcom.c,v 1.34 91/03/09 12:29:49 glenne Exp $
+ *
+ * Module name: remcom.c $
+ * Revision: 1.34 $
+ * Date: 91/03/09 12:29:49 $
+ * Contributor: Lake Stevens Instrument Division$
+ *
+ * Description: low level support for gdb debugger. $
+ *
+ * Considerations: only works on target hardware $
+ *
+ * Written by: Glenn Engel $
+ * ModuleState: Experimental $
+ *
+ * NOTES: See Below $
+ *
+ * Heavily modified for XStormy16 by Mark Salter, Red Hat.
+ * Optimisations and 'X' support by Geoff Keating, Red Hat.
+ *
+ * To enable debugger support, two things need to happen. One, a
+ * call to set_debug_traps() is necessary in order to allow any breakpoints
+ * or error conditions to be properly intercepted and reported to gdb.
+ * Two, a breakpoint needs to be generated to begin communication. This
+ * is most easily accomplished by a call to breakpoint(). Breakpoint()
+ * simulates a breakpoint by executing a trap #1.
+ *
+ * Because gdb will sometimes write to the stack area to execute function
+ * calls, this program cannot rely on using the inferior stack so it uses
+ * it's own stack area.
+ *
+ *************
+ *
+ * The following gdb commands are supported:
+ *
+ * command function Return value
+ *
+ * g return the value of the CPU registers hex data or ENN
+ * G set the value of the CPU registers OK or ENN
+ *
+ * mAA..AA,LLLL Read LLLL bytes at address AA..AA hex data or ENN
+ * MAA..AA,LLLL: Write LLLL bytes at address AA.AA OK or ENN
+ * XAA..AA,LLLL: Write LLLL binary bytes at address OK or ENN
+ * AA..AA
+ *
+ * c Resume at current address SNN ( signal NN)
+ * cAA..AA Continue at address AA..AA SNN
+ *
+ * s Step one instruction SNN
+ * sAA..AA Step one instruction from AA..AA SNN
+ *
+ * k kill
+ *
+ * ? What was the last sigval ? SNN (signal NN)
+ *
+ * All commands and responses are sent with a packet which includes a
+ * checksum. A packet consists of
+ *
+ * $<packet info>#<checksum>.
+ *
+ * where
+ * <packet info> :: <characters representing the command or response>
+ * <checksum> :: <two hex digits computed as modulo 256 sum of <packetinfo>>
+ *
+ * When a packet is received, it is first acknowledged with either '+' or '-'.
+ * '+' indicates a successful transfer. '-' indicates a failed transfer.
+ *
+ * Example:
+ *
+ * Host: Reply:
+ * $m0,10#2a +$00010203040506070809101112131415#42
+ *
+ ****************************************************************************/
+
+/* Local functions:
+ */
+static void putDebugChar(unsigned ch);
+static unsigned char getDebugChar(void);
+static void putPacket(unsigned char *);
+static void putHex (char c, unsigned long mem_arg, int count);
+static unsigned char *getpacket(void);
+static void hex2mem(unsigned char *, unsigned long, int);
+static int valid_addr_range (unsigned long mem, int count);
+static int hexToInt(unsigned char **, long *);
+static void prepare_to_step(void);
+static void finish_from_step(void);
+
+/* breakpoint opcode */
+#define BREAKPOINT_OPCODE 0x0006
+
+/* Error Detection Register */
+#define ERR_DETECT_REG (*(volatile unsigned *)0x7f08)
+#define UNDEF_INSN_ENA 0x01
+#define UNDEF_INSN_FLAG 0x02
+#define ODD_ADDR_ENA 0x04
+#define ODD_ADDR_FLAG 0x08
+#define BAD_ADDR_ENA 0x10
+#define BAD_ADDR_FLAG 0x20
+#define SER0_IRQ_ENA 0x1000
+#define SER0_IRQ_FLAG 0x2000
+
+/*****************************************************************************
+ * BUFMAX defines the maximum number of characters in inbound/outbound buffers
+ * at least NUMREGBYTES*2 are needed for register packets
+ */
+#define BUFMAX 80
+
+static const unsigned char hexchars[]="0123456789abcdef";
+
+#define NUMREGS 17
+
+/* Number of bytes of registers (extra 2 bytes is for 4 byte PC). */
+#define NUMREGBYTES ((NUMREGS * 2) + 2)
+enum regnames { R0, R1, R2, R3, R4, R5, R6, R7,
+ R8, R9, R10, R11, R12, R13, R14, R15,
+ PC };
+
+#define FP R13
+#define PSW R14
+#define SP R15
+
+struct regs {
+ int r[16];
+ long pc;
+} registers;
+
+static struct regs orig_registers;
+
+static unsigned char remcomBuffer[BUFMAX];
+
+/* Indicate whether inferior is running. Used to decide whether or not to
+ send T packet when stub is entered. */
+static char is_running;
+
+static inline unsigned char
+get_char(unsigned long addr)
+{
+ unsigned int msw, lsw;
+ unsigned char ret;
+
+ msw = addr >> 16;
+ lsw = addr & 0xffff;
+
+ asm("movf.b %0,(%2)\n"
+ : "=e"(ret) : "d"(msw), "r"(lsw) : "memory");
+
+ return ret;
+}
+
+static inline void
+set_char(unsigned long addr, unsigned int val)
+{
+ unsigned int msw, lsw;
+
+ msw = addr >> 16;
+ lsw = addr & 0xffff;
+
+ asm("movf.b (%1),%2\n"
+ : /* none */ : "d"(msw), "r"(lsw), "e"(val) : "memory" );
+}
+
+static inline unsigned int
+get_word(unsigned long addr)
+{
+ unsigned int ret, msw, lsw;
+
+ msw = addr >> 16;
+ lsw = addr & 0xffff;
+
+ asm("movf.w %0,(%2)\n"
+ : "=e"(ret) : "d"(msw), "r"(lsw) : "memory" );
+
+ return ret;
+}
+
+static inline void
+set_word(unsigned long addr, unsigned int val)
+{
+ unsigned int msw, lsw;
+
+ msw = addr >> 16;
+ lsw = addr & 0xffff;
+
+ asm("movf.w (%1),%2\n"
+ : /* none */ : "d"(msw), "r"(lsw), "e"(val) : "memory" );
+}
+
+static void
+assign_regs (struct regs *dest, const struct regs *src)
+{
+ int i;
+ char *d = (char *)dest, *s = (char *)src;
+ for (i = 0; i < sizeof (struct regs); i++)
+ *d++ = *s++;
+}
+
+/* Write out a register for a 'T' packet. */
+
+static unsigned char *
+putreg (unsigned char *buf, int regnum, void *mem_p, int count)
+{
+ int i;
+ unsigned char ch;
+ char *mem = (char *)mem_p;
+
+ *buf++ = hexchars[regnum >> 4];
+ *buf++ = hexchars[regnum % 16];
+ *buf++ = ':';
+
+ for (i=0;i<count;i++)
+ {
+ ch = *mem++;
+ *buf++ = hexchars[ch >> 4];
+ *buf++ = hexchars[ch % 16];
+ }
+ *buf++ = ';';
+ return(buf);
+}
+
+/*
+ * This function does all command procesing for interfacing to gdb.
+ */
+void
+handle_exception(void)
+{
+ char sigval;
+ unsigned char *ptr;
+ long addr, length;
+
+ /* reply to host that an exception has occurred */
+ sigval = 5; /* SIGTRAP is default */
+ if (ERR_DETECT_REG & UNDEF_INSN_FLAG)
+ {
+ ERR_DETECT_REG &= ~UNDEF_INSN_FLAG;
+ registers.pc -= 2;
+ if (get_word(registers.pc) != BREAKPOINT_OPCODE)
+ sigval = 4; /* SIGILL */
+ }
+ if (ERR_DETECT_REG & BAD_ADDR_FLAG)
+ {
+ ERR_DETECT_REG &= ~BAD_ADDR_FLAG;
+ sigval = 11; /* SIGSEGV */
+ }
+ if (ERR_DETECT_REG & SER0_IRQ_FLAG)
+ {
+ unsigned char ch;
+
+ ch = getDebugChar();
+ ERR_DETECT_REG &= ~SER0_IRQ_FLAG;
+ if (ch != 0x03)
+ return;
+ sigval = 2; /* SIGINT */
+ }
+
+ finish_from_step();
+
+ /* save original context so it can be restored as a result of
+ a kill packet. */
+ if (orig_registers.pc == 0L)
+ assign_regs (&orig_registers, ®isters);
+
+ if (is_running)
+ {
+ ptr = remcomBuffer;
+
+ *ptr++ = 'T'; /* notify gdb with signo, PC, FP and SP */
+ *ptr++ = hexchars[sigval >> 4];
+ *ptr++ = hexchars[sigval & 0xf];
+
+ ptr = putreg (ptr, PC, ®isters.pc, 4);
+ ptr = putreg (ptr, FP, ®isters.r[FP], 2);
+ ptr = putreg (ptr, SP, ®isters.r[SP], 2);
+
+ *ptr++ = 0;
+
+ putPacket(remcomBuffer);
+ }
+
+ while (1) {
+ char kind;
+
+ ptr = getpacket();
+ kind = *ptr++;
+ if (kind == 'M' || kind == 'X')
+ {
+ /* MAA..AA,LLLL: Write LLLL bytes at address AA.AA return OK */
+ /* TRY TO READ '%x,%x:'. IF SUCCEED, SET PTR = 0 */
+ if (hexToInt(&ptr,&addr)
+ && *(ptr++) == ','
+ && hexToInt(&ptr,&length)
+ && *(ptr++) == ':')
+ {
+ if (valid_addr_range (addr, length))
+ {
+ if (kind == 'M')
+ hex2mem(ptr, addr, length);
+ else
+ {
+ int i;
+ for (i = 0; i < length; i++)
+ if (*ptr++ == 0x7d)
+ set_char (addr++, *ptr++ ^ 0x20);
+ else
+ set_char (addr++, ptr[-1]);
+
+ }
+ putPacket ("OK");
+ }
+ else
+ putPacket ("E03");
+ }
+ else
+ putPacket ("E02");
+ }
+ else if (kind == 'm')
+ {
+ /* mAA..AA,LLLL Read LLLL bytes at address AA..AA */
+ /* TRY TO READ %x,%x. IF SUCCEED, SET PTR = 0 */
+ if (hexToInt(&ptr,&addr)
+ && *(ptr++) == ','
+ && hexToInt (&ptr,&length))
+ {
+ if (valid_addr_range (addr, length))
+ putHex (0, addr, length);
+ else
+ putPacket ("E03");
+ }
+ else
+ putPacket ("E02");
+ }
+ else if (kind == 'R')
+ {
+ if (hexToInt (&ptr, &addr))
+ registers.pc = addr;
+ putPacket ("OK");
+ }
+ else if (kind == '!')
+ putPacket ("OK");
+ else if (kind == '?')
+ putHex ('S', (unsigned long)(unsigned int)&sigval, 1);
+ else if (kind == 'g')
+ putHex (0, (unsigned long)(unsigned int)®isters, NUMREGBYTES);
+ else if (kind == 'P')
+ {
+ /* set the value of a single CPU register - return OK */
+ unsigned long regno;
+
+ if (hexToInt (&ptr, ®no)
+ && *ptr++ == '='
+ && regno < NUMREGS)
+ {
+ hex2mem (ptr, (unsigned long)(unsigned int)(registers.r + regno),
+ regno == PC ? 4 : 2);
+ putPacket ("OK");
+ }
+ else
+ putPacket ("E01");
+ }
+ else if (kind == 'G')
+ {
+ /* set the value of the CPU registers - return OK */
+ hex2mem(ptr, (unsigned long)(unsigned int)®isters, NUMREGBYTES);
+ putPacket ("OK");
+ }
+ else if (kind == 's' || kind == 'c')
+ {
+ /* sAA..AA Step one instruction from AA..AA(optional) */
+ /* cAA..AA Continue from address AA..AA(optional) */
+ /* try to read optional parameter, pc unchanged if no parm */
+
+ is_running = 1;
+
+ if (hexToInt(&ptr,&addr))
+ registers.pc = addr;
+
+ if (kind == 's') /* single-stepping */
+ prepare_to_step();
+ return;
+ }
+ else if (kind == 'k')
+ {
+ /* kill the program */
+ assign_regs (®isters, &orig_registers);
+ is_running = 0;
+ putPacket ("");
+ }
+ else
+ /* Unknown code. Return an empty reply message. */
+ putPacket ("");
+ }
+}
+
+static int
+hex (int ch)
+{
+ if ((ch >= '0') && (ch <= '9')) return (ch-'0');
+ if ((ch >= 'a') && (ch <= 'f')) return (ch-'a'+10);
+ if ((ch >= 'A') && (ch <= 'F')) return (ch-'A'+10);
+ return (-1);
+}
+
+/* scan for the sequence $<data>#<checksum> */
+
+static unsigned char *
+getpacket (void)
+{
+ unsigned char *buffer = &remcomBuffer[0];
+ unsigned checksum;
+ int count;
+ char ch;
+
+ while (1)
+ {
+ /* wait around for the start character, ignore all other characters */
+ while (getDebugChar () != '$')
+ ;
+
+ checksum = 0;
+ count = 0;
+ while ((ch = getDebugChar ()) == '$')
+ ;
+
+ /* now, read until a # or end of buffer is found */
+ while (ch != '#' && count < BUFMAX - 1)
+ {
+ checksum = checksum + ch;
+ buffer[count] = ch;
+ count = count + 1;
+ ch = getDebugChar ();
+ }
+ buffer[count] = 0;
+
+ if (ch == '#')
+ {
+ unsigned xmitcsum;
+ ch = getDebugChar ();
+ xmitcsum = hex (ch) << 4;
+ ch = getDebugChar ();
+ xmitcsum += hex (ch);
+
+ /* If one of the above 'hex' calls returns -1, xmitcsum will
+ have high bits set, and so the test below will fail. */
+
+ if ((checksum & 0xFF) != xmitcsum)
+ putDebugChar ('-'); /* failed checksum */
+ else
+ {
+ putDebugChar ('+'); /* successful transfer */
+ return &buffer[0];
+ }
+ }
+ }
+}
+
+/* send the packet in buffer. */
+
+static void
+putPacket (unsigned char *buffer_p)
+{
+ /* $<packet info>#<checksum>. */
+ do {
+ unsigned checksum;
+ unsigned char *buffer = buffer_p;
+
+ putDebugChar('$');
+ checksum = 0;
+
+ while (*buffer) {
+ putDebugChar(*buffer);
+ checksum += *buffer;
+ buffer++;
+ }
+ putDebugChar('#');
+ putDebugChar(hexchars[(checksum >> 4) % 16]);
+ putDebugChar(hexchars[checksum % 16]);
+ } while (getDebugChar() != '+');
+}
+
+/* Convert the memory pointed to by mem into hex, and return it as a packet. */
+
+static void
+putHex (char c, unsigned long mem_arg, int count)
+{
+ do {
+ unsigned long mem = mem_arg;
+ int i;
+ unsigned checksum;
+
+ putDebugChar('$');
+ checksum = 0;
+
+ if (c)
+ {
+ checksum = c;
+ putDebugChar(c);
+ }
+
+ for (i = 0; i < count; i++)
+ {
+ unsigned char c = get_char (mem);
+ char ch = hexchars[c >> 4];
+ putDebugChar(ch);
+ checksum += ch;
+ ch = hexchars[c % 16];
+ putDebugChar(ch);
+ checksum += ch;
+ mem++;
+ }
+ putDebugChar('#');
+ putDebugChar(hexchars[(checksum >> 4) % 16]);
+ putDebugChar(hexchars[checksum % 16]);
+ } while (getDebugChar() != '+');
+}
+
+/* Function: gdb_write(char *, int)
+ Make gdb write n bytes to stdout (not assumed to be null-terminated). */
+
+void
+gdb_write (char *data, int len)
+{
+ ERR_DETECT_REG &= ~SER0_IRQ_ENA;
+ putHex ('O', (unsigned long)(unsigned int)data, len);
+ ERR_DETECT_REG |= SER0_IRQ_ENA;
+}
+
+int
+gdb_read (char *buf, int nbytes)
+{
+ int i = 0;
+
+ ERR_DETECT_REG &= ~SER0_IRQ_ENA;
+ for (i = 0; i < nbytes; i++)
+ {
+ *(buf + i) = getDebugChar();
+ if ((*(buf + i) == '\n') || (*(buf + i) == '\r'))
+ {
+ (*(buf + i + 1)) = 0;
+ break;
+ }
+ }
+ ERR_DETECT_REG |= SER0_IRQ_ENA;
+ return (i);
+}
+
+static int
+valid_addr_range (unsigned long mem, int count)
+{
+ unsigned long last = mem + count - 1;
+
+ if (last < 0x800L)
+ return 1;
+
+ if (mem < 0x7f00L)
+ return 0;
+
+ if (last > 0x7ffffL)
+ return 0;
+
+ return 1;
+}
+
+/* Convert the hex array pointed to by buf into binary to be placed in mem.
+ Return a pointer to the character AFTER the last byte written. */
+
+static void
+hex2mem (unsigned char *buf, unsigned long mem, int count)
+{
+ int i;
+ unsigned char ch;
+
+ for (i=0;i<count;i++)
+ {
+ ch = hex(*buf++) << 4;
+ ch = ch + hex(*buf++);
+ set_char (mem++, ch);
+ }
+}
+
+/**********************************************/
+/* WHILE WE FIND NICE HEX CHARS, BUILD AN INT */
+/* RETURN NUMBER OF CHARS PROCESSED */
+/**********************************************/
+static int
+hexToInt (unsigned char **ptr, long *intValue)
+{
+ int numChars = 0;
+ int hexValue;
+
+ *intValue = 0;
+ while (**ptr)
+ {
+ hexValue = hex(**ptr);
+ if (hexValue >=0)
+ {
+ *intValue = (*intValue <<4) | (unsigned) hexValue;
+ numChars ++;
+ }
+ else
+ break;
+ (*ptr)++;
+ }
+ return (numChars);
+}
+
+
+/* Function: opcode_size
+ Determine number of bytes in full opcode by examining first word.
+*/
+static int
+opcode_size(unsigned int opcode)
+{
+ if ((opcode & 0xff00) == 0)
+ return 2;
+
+ if ((opcode & 0xf800) == 0)
+ return 4;
+
+ if ((opcode & 0xf800) == 0x7800)
+ return 4;
+
+ if ((opcode & 0xf000) == 0xc000)
+ return 4;
+
+ if ((opcode & 0xf100) == 0x2000)
+ return 4;
+
+ if ((opcode & 0xfff0) == 0x30e0)
+ return 4;
+
+ if ((opcode & 0xf008) == 0x6008)
+ return 4;
+
+ if ((opcode & 0xf808) == 0x7008)
+ return 4;
+
+ opcode >>= 8;
+ if (opcode == 0x0c || opcode == 0x0d || opcode == 0x31)
+ return 4;
+
+ return 2;
+}
+
+static struct {
+ unsigned long addr;
+ unsigned long addr2;
+ unsigned int opcode;
+ unsigned int opcode2;
+} stepinfo;
+
+/* Function: prepare_to_step
+ Called from handle_exception to prepare the user program to single-step.
+ Places a trap instruction after the target instruction, with special
+ extra handling for branch instructions.
+*/
+
+static void
+prepare_to_step(void)
+{
+ unsigned long pc = registers.pc;
+ unsigned long next_pc, next_pc2;
+ unsigned int op, op2, sp;
+ unsigned char op_msb, op_lsb;
+ int r12;
+ char r8;
+
+ op = get_word(pc);
+ op_msb = (op >> 8) & 0xff;
+ op_lsb = op & 0xff;
+ op2 = get_word(pc + 2);
+ next_pc = pc + opcode_size(op);
+ next_pc2 = 0;
+
+ if (op_msb == 0)
+ {
+ if (op_lsb == 2)
+ {
+ /* IRET */
+ sp = registers.r[SP];
+ next_pc = *(unsigned *)(sp - 4);
+ next_pc = (next_pc << 16) | *(unsigned *)(sp - 6);
+ }
+ else if (op_lsb == 3)
+ {
+ /* RET */
+ sp = registers.r[SP];
+ next_pc = *(unsigned *)(sp - 2);
+ next_pc = (next_pc << 16) | *(unsigned *)(sp - 4);
+ }
+ else
+ {
+ op2 = op_lsb & 0xf0;
+ if (op2 && op2 < 0x40)
+ {
+ /* {CALLR,BR,ICALLR} Rs */
+ next_pc = (pc + 2) + (int)registers.r[op_lsb & 0xf];
+ }
+ else if (op2 < 0x80 || op2 == 0xa0 || op2 == 0xb0)
+ {
+ /* {JMP,ICALL,CALL} Rb,Rs */
+ next_pc = registers.r[(op_lsb & 0x10) ? 9 : 8];
+ next_pc = (next_pc << 16) | (unsigned int)registers.r[op_lsb & 0xf];
+ }
+ }
+ }
+ else if (op_msb < 4)
+ {
+ /* {CALLF,JMPF,ICALLF} a24 */
+ next_pc = ((unsigned long)op2) << 8;
+ next_pc |= op_lsb;
+ }
+ else if (op_msb < 8)
+ {
+ if ((op2 & 0xf000) == 0)
+ {
+ /* Bx Rd,#imm4,r12 */
+ /* Bx Rd,Rs,r12 */
+ r12 = op2 << 4;
+ r12 >>= 4;
+ next_pc2 = (pc + 4) + r12;
+ }
+ }
+ else if (op_msb == 0x0c || op_msb == 0x0d || (op_msb & 0xf1) == 0x20 ||
+ ((op_msb >= 0x7c && op_msb <= 0x7f) && (op2 & 0x8000) == 0))
+ {
+ /* Bxx Rd,Rs,r12 */
+ /* Bxx Rd,#imm8,r12 */
+ /* Bx m8,#imm3,r12 */
+ /* Bx s8,#imm3,r12 */
+ r12 = op2 << 4;
+ r12 >>= 4;
+ next_pc2 = (pc + 4) + r12;
+ }
+ else if ((op_msb & 0xf0) == 0x10)
+ {
+ /* {BR,CALLR} r12 */
+ r12 = (op & 0xffe) << 4;
+ r12 >>= 4;
+ next_pc = (pc + 2) + r12;
+ }
+ else if ((op_msb & 0xe0) == 0xc0)
+ {
+ /* Bxx Rx,#imm16,r8 */
+ /* TBxx r8 */
+ r8 = op_lsb;
+ next_pc2 = next_pc + r8;
+ }
+
+ stepinfo.addr = next_pc;
+ stepinfo.opcode = get_word(next_pc);
+ set_word(next_pc, BREAKPOINT_OPCODE);
+
+ if (next_pc2)
+ {
+ stepinfo.addr2 = next_pc2;
+ stepinfo.opcode2 = get_word(next_pc2);
+ set_word(next_pc2, BREAKPOINT_OPCODE);
+ }
+}
+
+/* Function: finish_from_step
+ Called from handle_exception to finish up when the user program
+ returns from a single-step. Replaces the instructions that had
+ been overwritten by breakpoint. */
+
+static void
+finish_from_step (void)
+{
+ if (stepinfo.addr) /* anything to do? */
+ {
+ set_word(stepinfo.addr, stepinfo.opcode);
+ stepinfo.addr = 0;
+ if (stepinfo.addr2)
+ {
+ set_word(stepinfo.addr2, stepinfo.opcode2);
+ stepinfo.addr2 = 0;
+ }
+ }
+}
+
+
+/*
+ * UART support
+ */
+#define UART0_BASE 0x7f38
+#define UART1_BASE 0x7f48
+
+#define UART_CR(base) (*(volatile unsigned char *)(base))
+#define UART_RXD(base) (*(volatile unsigned int *)((base) + 2))
+#define UART_TXD(base) (*(volatile unsigned int *)((base) + 4))
+
+#define UART_CR_RUN 0x80
+#define UART_CR_ERR 0x40
+#define UART_CR_BAUD_115k 0x20
+#define UART_CR_PARITY 0x10
+#define UART_CR_TXEMPTY 0x08
+#define UART_CR_TXIEN 0x04
+#define UART_CR_RXRDY 0x02
+#define UART_CR_RXIEN 0x01
+
+#define DBG_UART UART0_BASE
+
+static void
+putDebugChar(unsigned ch)
+{
+ while ((UART_CR(DBG_UART) & UART_CR_TXEMPTY) == 0) ;
+
+ UART_TXD(DBG_UART) = ch;
+}
+
+static unsigned char
+getDebugChar(void)
+{
+ while ((UART_CR(DBG_UART) & UART_CR_RXRDY) == 0) ;
+
+ return UART_RXD(DBG_UART);
+}
+
+void
+uart_init(void)
+{
+ UART_CR(DBG_UART) |= (UART_CR_RUN | UART_CR_RXIEN);
+}
+
+2001-12-22 Geoffrey Keating <geoffk@redhat.com>
+ Catherine Moore <clm@redhat.com>
+ Richard Henderson <rth@redhat.com>
+ Corinna Vinschen <vinschen@redhat.com>
+
+ * configure.host: Add support for xstormy16.
+ * libc/include/machine/ieeefp.h: Add support for xstormy16.
+ * libc/include/machine/setjmp.h: Add support for xstormy16.
+ * libc/include/sys/config.h: Add support for xstormy16.
+ * libc/machine/xstormy16/Makefile.am: New file.
+ * libc/machine/xstormy16/Makefile.in: New file.
+ * libc/machine/xstormy16/aclocal.m4: New file.
+ * libc/machine/xstormy16/configure: New file.
+ * libc/machine/xstormy16/configure.in: New file.
+ * libc/machine/xstormy16/setjmp.S: New file.
+
2001-12-19 Thomas Fitzsimmons <fitzsim@redhat.com>
* libm/machine/configure.in (HAVE_LIBM_MACHINE_DIR): New conditional.
w65*)
machine_dir=w65
;;
+ xstormy16)
+ machine_dir=xstormy16
+ ;;
z8k)
machine_dir=z8k
;;
syscall_dir=syscalls
newlib_cflags="${newlib_cflags} -DSMALL_DTOA -DSMALL_MEMORY"
;;
+ xstormy16-*-*)
+ newlib_cflags="${newlib_cflags} -DHAVE_GETTIMEOFDAY"
+ syscall_dir=syscalls
+ ;;
z8k-*-*)
syscall_dir=syscalls
;;
#define __IEEE_BIG_ENDIAN
#endif
+#ifdef __xstormy16__
+#define __IEEE_LITTLE_ENDIAN
+#define __SMALL_BITFIELDS
+#endif
+
#ifndef __IEEE_BIG_ENDIAN
#ifndef __IEEE_LITTLE_ENDIAN
#define _JBTYPE unsigned long
#endif
+#ifdef __xstormy16__
+/* 4 GPRs plus SP plus PC. */
+#define _JBLEN 8
+#endif
+
#ifdef _JBLEN
#ifdef _JBTYPE
typedef _JBTYPE jmp_buf[_JBLEN];
#endif
#endif
+#ifdef __xstormy16__
+#define __IEEE_LITTLE_ENDIAN
+#define __SMALL_BITFIELDS
+#undef INT_MAX
+#undef UINT_MAX
+#define INT_MAX __INT_MAX__
+#define UINT_MAX (__INT_MAX__ * 2U + 1)
+#define SIZE_T_SMALLER_THAN_LONG
+#define MALLOC_ALIGNMENT 8
+#define _POINTER_INT short
+#define __BUFSIZ__ 16
+#endif
+
#if INT_MAX == 32767
typedef long int __int32_t;
typedef unsigned long int __uint32_t;
--- /dev/null
+## Process this file with automake to generate Makefile.in
+
+AUTOMAKE_OPTIONS = cygnus
+
+# hack: putting $(newlib_basedir)/libm/common into INCLUDES forces automake
+# to output a definition for newlib_basedir.
+INCLUDES = -I $(newlib_basedir)/libm/common $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
+
+noinst_LIBRARIES = lib.a
+
+lib_a_SOURCES = setjmp.S
+
+ACLOCAL_AMFLAGS = -I ../../..
+CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
--- /dev/null
+# Makefile.in generated automatically by automake 1.4 from Makefile.am
+
+# Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+
+SHELL = @SHELL@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+
+bindir = @bindir@
+sbindir = @sbindir@
+libexecdir = @libexecdir@
+datadir = @datadir@
+sysconfdir = @sysconfdir@
+sharedstatedir = @sharedstatedir@
+localstatedir = @localstatedir@
+libdir = @libdir@
+infodir = @infodir@
+mandir = @mandir@
+includedir = @includedir@
+oldincludedir = /usr/include
+
+DESTDIR =
+
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+
+top_builddir = .
+
+ACLOCAL = @ACLOCAL@
+AUTOCONF = @AUTOCONF@
+AUTOMAKE = @AUTOMAKE@
+AUTOHEADER = @AUTOHEADER@
+
+INSTALL = @INSTALL@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS)
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+transform = @program_transform_name@
+
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+host_alias = @host_alias@
+host_triplet = @host@
+AR = @AR@
+AS = @AS@
+CC = @CC@
+CPP = @CPP@
+EXEEXT = @EXEEXT@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+NEWLIB_CFLAGS = @NEWLIB_CFLAGS@
+PACKAGE = @PACKAGE@
+RANLIB = @RANLIB@
+VERSION = @VERSION@
+machine_dir = @machine_dir@
+newlib_basedir = @newlib_basedir@
+sys_dir = @sys_dir@
+
+AUTOMAKE_OPTIONS = cygnus
+
+# hack: putting $(newlib_basedir)/libm/common into INCLUDES forces automake
+# to output a definition for newlib_basedir.
+INCLUDES = -I $(newlib_basedir)/libm/common $(NEWLIB_CFLAGS) $(CROSS_CFLAGS) $(TARGET_CFLAGS)
+
+noinst_LIBRARIES = lib.a
+
+lib_a_SOURCES = setjmp.S
+
+ACLOCAL_AMFLAGS = -I ../../..
+CONFIG_STATUS_DEPENDENCIES = $(newlib_basedir)/configure.host
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+mkinstalldirs = $(SHELL) $(top_srcdir)/../../../../mkinstalldirs
+CONFIG_CLEAN_FILES =
+LIBRARIES = $(noinst_LIBRARIES)
+
+
+DEFS = @DEFS@ -I. -I$(srcdir)
+CPPFLAGS = @CPPFLAGS@
+LDFLAGS = @LDFLAGS@
+LIBS = @LIBS@
+lib_a_LIBADD =
+lib_a_OBJECTS = setjmp.o
+CFLAGS = @CFLAGS@
+COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@
+DIST_COMMON = Makefile.am Makefile.in aclocal.m4 configure configure.in
+
+
+DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST)
+
+TAR = gtar
+GZIP_ENV = --best
+SOURCES = $(lib_a_SOURCES)
+OBJECTS = $(lib_a_OBJECTS)
+
+all: all-redirect
+.SUFFIXES:
+.SUFFIXES: .S .c .o .s
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4)
+ cd $(top_srcdir) && $(AUTOMAKE) --cygnus Makefile
+
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+ cd $(top_builddir) \
+ && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
+
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in \
+ ../../../acinclude.m4 ../../../aclocal.m4
+ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
+
+config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+ $(SHELL) ./config.status --recheck
+$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES)
+ cd $(srcdir) && $(AUTOCONF)
+
+mostlyclean-noinstLIBRARIES:
+
+clean-noinstLIBRARIES:
+ -test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+
+distclean-noinstLIBRARIES:
+
+maintainer-clean-noinstLIBRARIES:
+
+.c.o:
+ $(COMPILE) -c $<
+
+.s.o:
+ $(COMPILE) -c $<
+
+.S.o:
+ $(COMPILE) -c $<
+
+mostlyclean-compile:
+ -rm -f *.o core *.core
+
+clean-compile:
+
+distclean-compile:
+ -rm -f *.tab.c
+
+maintainer-clean-compile:
+
+lib.a: $(lib_a_OBJECTS) $(lib_a_DEPENDENCIES)
+ -rm -f lib.a
+ $(AR) cru lib.a $(lib_a_OBJECTS) $(lib_a_LIBADD)
+ $(RANLIB) lib.a
+
+tags: TAGS
+
+ID: $(HEADERS) $(SOURCES) $(LISP)
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ here=`pwd` && cd $(srcdir) \
+ && mkid -f$$here/ID $$unique $(LISP)
+
+TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP)
+ tags=; \
+ here=`pwd`; \
+ list='$(SOURCES) $(HEADERS)'; \
+ unique=`for i in $$list; do echo $$i; done | \
+ awk ' { files[$$0] = 1; } \
+ END { for (i in files) print i; }'`; \
+ test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \
+ || (cd $(srcdir) && etags $(ETAGS_ARGS) $$tags $$unique $(LISP) -o $$here/TAGS)
+
+mostlyclean-tags:
+
+clean-tags:
+
+distclean-tags:
+ -rm -f TAGS ID
+
+maintainer-clean-tags:
+
+distdir = $(PACKAGE)-$(VERSION)
+top_distdir = $(distdir)
+
+# This target untars the dist file and tries a VPATH configuration. Then
+# it guarantees that the distribution is self-contained by making another
+# tarfile.
+distcheck: dist
+ -rm -rf $(distdir)
+ GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz
+ mkdir $(distdir)/=build
+ mkdir $(distdir)/=inst
+ dc_install_base=`cd $(distdir)/=inst && pwd`; \
+ cd $(distdir)/=build \
+ && ../configure --srcdir=.. --prefix=$$dc_install_base \
+ && $(MAKE) $(AM_MAKEFLAGS) \
+ && $(MAKE) $(AM_MAKEFLAGS) dvi \
+ && $(MAKE) $(AM_MAKEFLAGS) check \
+ && $(MAKE) $(AM_MAKEFLAGS) install \
+ && $(MAKE) $(AM_MAKEFLAGS) installcheck \
+ && $(MAKE) $(AM_MAKEFLAGS) dist
+ -rm -rf $(distdir)
+ @banner="$(distdir).tar.gz is ready for distribution"; \
+ dashes=`echo "$$banner" | sed s/./=/g`; \
+ echo "$$dashes"; \
+ echo "$$banner"; \
+ echo "$$dashes"
+dist: distdir
+ -chmod -R a+r $(distdir)
+ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+ -rm -rf $(distdir)
+dist-all: distdir
+ -chmod -R a+r $(distdir)
+ GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir)
+ -rm -rf $(distdir)
+distdir: $(DISTFILES)
+ -rm -rf $(distdir)
+ mkdir $(distdir)
+ -chmod 777 $(distdir)
+ @for file in $(DISTFILES); do \
+ if test -f $$file; then d=.; else d=$(srcdir); fi; \
+ if test -d $$d/$$file; then \
+ cp -pr $$d/$$file $(distdir)/$$file; \
+ else \
+ test -f $(distdir)/$$file \
+ || ln $$d/$$file $(distdir)/$$file 2> /dev/null \
+ || cp -p $$d/$$file $(distdir)/$$file || :; \
+ fi; \
+ done
+info-am:
+info: info-am
+dvi-am:
+dvi: dvi-am
+check-am:
+check: check-am
+installcheck-am:
+installcheck: installcheck-am
+install-info-am:
+install-info: install-info-am
+install-exec-am:
+install-exec: install-exec-am
+
+install-data-am:
+install-data: install-data-am
+
+install-am: all-am
+ @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+install: install-am
+uninstall-am:
+uninstall: uninstall-am
+all-am: Makefile $(LIBRARIES)
+all-redirect: all-am
+install-strip:
+ $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install
+installdirs:
+
+
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+ -rm -f Makefile $(CONFIG_CLEAN_FILES)
+ -rm -f config.cache config.log stamp-h stamp-h[0-9]*
+
+maintainer-clean-generic:
+mostlyclean-am: mostlyclean-noinstLIBRARIES mostlyclean-compile \
+ mostlyclean-tags mostlyclean-generic
+
+mostlyclean: mostlyclean-am
+
+clean-am: clean-noinstLIBRARIES clean-compile clean-tags clean-generic \
+ mostlyclean-am
+
+clean: clean-am
+
+distclean-am: distclean-noinstLIBRARIES distclean-compile \
+ distclean-tags distclean-generic clean-am
+
+distclean: distclean-am
+ -rm -f config.status
+
+maintainer-clean-am: maintainer-clean-noinstLIBRARIES \
+ maintainer-clean-compile maintainer-clean-tags \
+ maintainer-clean-generic distclean-am
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+
+maintainer-clean: maintainer-clean-am
+ -rm -f config.status
+
+.PHONY: mostlyclean-noinstLIBRARIES distclean-noinstLIBRARIES \
+clean-noinstLIBRARIES maintainer-clean-noinstLIBRARIES \
+mostlyclean-compile distclean-compile clean-compile \
+maintainer-clean-compile tags mostlyclean-tags distclean-tags \
+clean-tags maintainer-clean-tags distdir info-am info dvi-am dvi check \
+check-am installcheck-am installcheck install-info-am install-info \
+install-exec-am install-exec install-data-am install-data install-am \
+install uninstall-am uninstall all-redirect all-am all installdirs \
+mostlyclean-generic distclean-generic clean-generic \
+maintainer-clean-generic clean mostlyclean distclean maintainer-clean
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+dnl aclocal.m4 generated automatically by aclocal 1.4
+
+dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
+dnl This file is free software; the Free Software Foundation
+dnl gives unlimited permission to copy and/or distribute it,
+dnl with or without modifications, as long as this notice is preserved.
+
+dnl This program is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+dnl PARTICULAR PURPOSE.
+
+dnl This provides configure definitions used by all the newlib
+dnl configure.in files.
+
+dnl Basic newlib configury. This calls basic introductory stuff,
+dnl including AM_INIT_AUTOMAKE and AC_CANONICAL_HOST. It also runs
+dnl configure.host. The only argument is the relative path to the top
+dnl newlib directory.
+
+AC_DEFUN(NEWLIB_CONFIGURE,
+[
+dnl Default to --enable-multilib
+AC_ARG_ENABLE(multilib,
+[ --enable-multilib build many library versions (default)],
+[case "${enableval}" in
+ yes) multilib=yes ;;
+ no) multilib=no ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
+ esac], [multilib=yes])dnl
+
+dnl Support --enable-target-optspace
+AC_ARG_ENABLE(target-optspace,
+[ --enable-target-optspace optimize for space],
+[case "${enableval}" in
+ yes) target_optspace=yes ;;
+ no) target_optspace=no ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for target-optspace option) ;;
+ esac], [target_optspace=])dnl
+
+dnl Support --enable-malloc-debugging - currently only supported for Cygwin
+AC_ARG_ENABLE(malloc-debugging,
+[ --enable-malloc-debugging indicate malloc debugging requested],
+[case "${enableval}" in
+ yes) malloc_debugging=yes ;;
+ no) malloc_debugging=no ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for malloc-debugging option) ;;
+ esac], [malloc_debugging=])dnl
+
+dnl Support --enable-newlib-mb
+AC_ARG_ENABLE(newlib-mb,
+[ --enable-newlib-mb enable multibyte support],
+[case "${enableval}" in
+ yes) newlib_mb=yes ;;
+ no) newlib_mb=no ;;
+ *) AC_MSG_ERROR(bad value ${enableval} for newlib-mb option) ;;
+ esac], [newlib_mb=no])dnl
+
+dnl We may get other options which we don't document:
+dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
+
+test -z "[$]{with_target_subdir}" && with_target_subdir=.
+
+if test "[$]{srcdir}" = "."; then
+ if test "[$]{with_target_subdir}" != "."; then
+ newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}../$1"
+ else
+ newlib_basedir="[$]{srcdir}/[$]{with_multisrctop}$1"
+ fi
+else
+ newlib_basedir="[$]{srcdir}/$1"
+fi
+AC_SUBST(newlib_basedir)
+
+AC_CANONICAL_HOST
+
+AM_INIT_AUTOMAKE(newlib, 1.9.0)
+
+# FIXME: We temporarily define our own version of AC_PROG_CC. This is
+# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We
+# are probably using a cross compiler, which will not be able to fully
+# link an executable. This should really be fixed in autoconf
+# itself.
+
+AC_DEFUN(LIB_AC_PROG_CC,
+[AC_BEFORE([$0], [AC_PROG_CPP])dnl
+AC_CHECK_PROG(CC, gcc, gcc)
+if test -z "$CC"; then
+ AC_CHECK_PROG(CC, cc, cc, , , /usr/ucb/cc)
+ test -z "$CC" && AC_MSG_ERROR([no acceptable cc found in \$PATH])
+fi
+
+AC_PROG_CC_GNU
+
+if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+dnl Check whether -g works, even if CFLAGS is set, in case the package
+dnl plays around with CFLAGS (such as to build both debugging and
+dnl normal versions of a library), tasteless as that idea is.
+ ac_test_CFLAGS="${CFLAGS+set}"
+ ac_save_CFLAGS="$CFLAGS"
+ CFLAGS=
+ AC_PROG_CC_G
+ if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+ elif test $ac_cv_prog_cc_g = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-O2"
+ fi
+else
+ GCC=
+ test "${CFLAGS+set}" = set || CFLAGS="-g"
+fi
+])
+
+LIB_AC_PROG_CC
+
+# AC_CHECK_TOOL does AC_REQUIRE (AC_CANONICAL_BUILD). If we don't
+# run it explicitly here, it will be run implicitly before
+# NEWLIB_CONFIGURE, which doesn't work because that means that it will
+# be run before AC_CANONICAL_HOST.
+AC_CANONICAL_BUILD
+
+AC_CHECK_TOOL(AS, as)
+AC_CHECK_TOOL(AR, ar)
+AC_CHECK_TOOL(RANLIB, ranlib, :)
+
+AC_PROG_INSTALL
+
+AM_MAINTAINER_MODE
+
+# We need AC_EXEEXT to keep automake happy in cygnus mode. However,
+# at least currently, we never actually build a program, so we never
+# need to use $(EXEEXT). Moreover, the test for EXEEXT normally
+# fails, because we are probably configuring with a cross compiler
+# which can't create executables. So we include AC_EXEEXT to keep
+# automake happy, but we don't execute it, since we don't care about
+# the result.
+if false; then
+ AC_EXEEXT
+fi
+
+. [$]{newlib_basedir}/configure.host
+
+case [$]{newlib_basedir} in
+/* | [A-Za-z]:[/\\]*) newlib_flagbasedir=[$]{newlib_basedir} ;;
+*) newlib_flagbasedir='[$](top_builddir)/'[$]{newlib_basedir} ;;
+esac
+
+newlib_cflags="[$]{newlib_cflags} -I"'[$](top_builddir)'"/$1/targ-include -I[$]{newlib_flagbasedir}/libc/include"
+case "${host}" in
+ *-*-cygwin*)
+ newlib_cflags="[$]{newlib_cflags} -I[$]{newlib_flagbasedir}/../winsup/cygwin/include -I[$]{newlib_flagbasedir}/../winsup/w32api/include"
+ ;;
+esac
+
+newlib_cflags="[$]{newlib_cflags} -fno-builtin"
+
+NEWLIB_CFLAGS=${newlib_cflags}
+AC_SUBST(NEWLIB_CFLAGS)
+
+AC_SUBST(machine_dir)
+AC_SUBST(sys_dir)
+])
+
+# Do all the work for Automake. This macro actually does too much --
+# some checks are only needed if your package does certain things.
+# But this isn't really a big deal.
+
+# serial 1
+
+dnl Usage:
+dnl AM_INIT_AUTOMAKE(package,version, [no-define])
+
+AC_DEFUN(AM_INIT_AUTOMAKE,
+[AC_REQUIRE([AC_PROG_INSTALL])
+PACKAGE=[$1]
+AC_SUBST(PACKAGE)
+VERSION=[$2]
+AC_SUBST(VERSION)
+dnl test to see if srcdir already configured
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+ AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
+fi
+ifelse([$3],,
+AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
+AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
+AC_REQUIRE([AM_SANITY_CHECK])
+AC_REQUIRE([AC_ARG_PROGRAM])
+dnl FIXME This is truly gross.
+missing_dir=`cd $ac_aux_dir && pwd`
+AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
+AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
+AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
+AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
+AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
+AC_REQUIRE([AC_PROG_MAKE_SET])])
+
+#
+# Check to make sure that the build environment is sane.
+#
+
+AC_DEFUN(AM_SANITY_CHECK,
+[AC_MSG_CHECKING([whether build environment is sane])
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+ if test "[$]*" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftestfile`
+ fi
+ if test "[$]*" != "X $srcdir/configure conftestfile" \
+ && test "[$]*" != "X conftestfile $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
+alias in your environment])
+ fi
+
+ test "[$]2" = conftestfile
+ )
+then
+ # Ok.
+ :
+else
+ AC_MSG_ERROR([newly created file is older than distributed files!
+Check your system clock])
+fi
+rm -f conftest*
+AC_MSG_RESULT(yes)])
+
+dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
+dnl The program must properly implement --version.
+AC_DEFUN(AM_MISSING_PROG,
+[AC_MSG_CHECKING(for working $2)
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if ($2 --version) < /dev/null > /dev/null 2>&1; then
+ $1=$2
+ AC_MSG_RESULT(found)
+else
+ $1="$3/missing $2"
+ AC_MSG_RESULT(missing)
+fi
+AC_SUBST($1)])
+
+# Add --enable-maintainer-mode option to configure.
+# From Jim Meyering
+
+# serial 1
+
+AC_DEFUN(AM_MAINTAINER_MODE,
+[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
+ dnl maintainer-mode is disabled by default
+ AC_ARG_ENABLE(maintainer-mode,
+[ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer],
+ USE_MAINTAINER_MODE=$enableval,
+ USE_MAINTAINER_MODE=no)
+ AC_MSG_RESULT($USE_MAINTAINER_MODE)
+ AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
+ MAINT=$MAINTAINER_MODE_TRUE
+ AC_SUBST(MAINT)dnl
+]
+)
+
+# Define a conditional.
+
+AC_DEFUN(AM_CONDITIONAL,
+[AC_SUBST($1_TRUE)
+AC_SUBST($1_FALSE)
+if $2; then
+ $1_TRUE=
+ $1_FALSE='#'
+else
+ $1_TRUE='#'
+ $1_FALSE=
+fi])
+
--- /dev/null
+#! /bin/sh
+
+# Guess values for system-dependent variables and create Makefiles.
+# Generated automatically using autoconf version 2.13
+# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
+#
+# This configure script is free software; the Free Software Foundation
+# gives unlimited permission to copy, distribute and modify it.
+
+# Defaults:
+ac_help=
+ac_default_prefix=/usr/local
+# Any additions from configure.in:
+ac_help="$ac_help
+ --enable-multilib build many library versions (default)"
+ac_help="$ac_help
+ --enable-target-optspace optimize for space"
+ac_help="$ac_help
+ --enable-malloc-debugging indicate malloc debugging requested"
+ac_help="$ac_help
+ --enable-newlib-mb enable multibyte support"
+ac_help="$ac_help
+ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer"
+
+# Initialize some variables set by options.
+# The variables have the same names as the options, with
+# dashes changed to underlines.
+build=NONE
+cache_file=./config.cache
+exec_prefix=NONE
+host=NONE
+no_create=
+nonopt=NONE
+no_recursion=
+prefix=NONE
+program_prefix=NONE
+program_suffix=NONE
+program_transform_name=s,x,x,
+silent=
+site=
+sitefile=
+srcdir=
+target=NONE
+verbose=
+x_includes=NONE
+x_libraries=NONE
+bindir='${exec_prefix}/bin'
+sbindir='${exec_prefix}/sbin'
+libexecdir='${exec_prefix}/libexec'
+datadir='${prefix}/share'
+sysconfdir='${prefix}/etc'
+sharedstatedir='${prefix}/com'
+localstatedir='${prefix}/var'
+libdir='${exec_prefix}/lib'
+includedir='${prefix}/include'
+oldincludedir='/usr/include'
+infodir='${prefix}/info'
+mandir='${prefix}/man'
+
+# Initialize some other variables.
+subdirs=
+MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
+# Maximum number of lines to put in a shell here document.
+ac_max_here_lines=12
+
+ac_prev=
+for ac_option
+do
+
+ # If the previous option needs an argument, assign it.
+ if test -n "$ac_prev"; then
+ eval "$ac_prev=\$ac_option"
+ ac_prev=
+ continue
+ fi
+
+ case "$ac_option" in
+ -*=*) ac_optarg=`echo "$ac_option" | sed 's/[-_a-zA-Z0-9]*=//'` ;;
+ *) ac_optarg= ;;
+ esac
+
+ # Accept the important Cygnus configure options, so we can diagnose typos.
+
+ case "$ac_option" in
+
+ -bindir | --bindir | --bindi | --bind | --bin | --bi)
+ ac_prev=bindir ;;
+ -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*)
+ bindir="$ac_optarg" ;;
+
+ -build | --build | --buil | --bui | --bu)
+ ac_prev=build ;;
+ -build=* | --build=* | --buil=* | --bui=* | --bu=*)
+ build="$ac_optarg" ;;
+
+ -cache-file | --cache-file | --cache-fil | --cache-fi \
+ | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
+ ac_prev=cache_file ;;
+ -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
+ | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
+ cache_file="$ac_optarg" ;;
+
+ -datadir | --datadir | --datadi | --datad | --data | --dat | --da)
+ ac_prev=datadir ;;
+ -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \
+ | --da=*)
+ datadir="$ac_optarg" ;;
+
+ -disable-* | --disable-*)
+ ac_feature=`echo $ac_option|sed -e 's/-*disable-//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_feature| sed 's/[-a-zA-Z0-9_]//g'`"; then
+ { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+ fi
+ ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+ eval "enable_${ac_feature}=no" ;;
+
+ -enable-* | --enable-*)
+ ac_feature=`echo $ac_option|sed -e 's/-*enable-//' -e 's/=.*//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_feature| sed 's/[-_a-zA-Z0-9]//g'`"; then
+ { echo "configure: error: $ac_feature: invalid feature name" 1>&2; exit 1; }
+ fi
+ ac_feature=`echo $ac_feature| sed 's/-/_/g'`
+ case "$ac_option" in
+ *=*) ;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "enable_${ac_feature}='$ac_optarg'" ;;
+
+ -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \
+ | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \
+ | --exec | --exe | --ex)
+ ac_prev=exec_prefix ;;
+ -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \
+ | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \
+ | --exec=* | --exe=* | --ex=*)
+ exec_prefix="$ac_optarg" ;;
+
+ -gas | --gas | --ga | --g)
+ # Obsolete; use --with-gas.
+ with_gas=yes ;;
+
+ -help | --help | --hel | --he)
+ # Omit some internal or obsolete options to make the list less imposing.
+ # This message is too long to be a string in the A/UX 3.1 sh.
+ cat << EOF
+Usage: configure [options] [host]
+Options: [defaults in brackets after descriptions]
+Configuration:
+ --cache-file=FILE cache test results in FILE
+ --help print this message
+ --no-create do not create output files
+ --quiet, --silent do not print \`checking...' messages
+ --site-file=FILE use FILE as the site file
+ --version print the version of autoconf that created configure
+Directory and file names:
+ --prefix=PREFIX install architecture-independent files in PREFIX
+ [$ac_default_prefix]
+ --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
+ [same as prefix]
+ --bindir=DIR user executables in DIR [EPREFIX/bin]
+ --sbindir=DIR system admin executables in DIR [EPREFIX/sbin]
+ --libexecdir=DIR program executables in DIR [EPREFIX/libexec]
+ --datadir=DIR read-only architecture-independent data in DIR
+ [PREFIX/share]
+ --sysconfdir=DIR read-only single-machine data in DIR [PREFIX/etc]
+ --sharedstatedir=DIR modifiable architecture-independent data in DIR
+ [PREFIX/com]
+ --localstatedir=DIR modifiable single-machine data in DIR [PREFIX/var]
+ --libdir=DIR object code libraries in DIR [EPREFIX/lib]
+ --includedir=DIR C header files in DIR [PREFIX/include]
+ --oldincludedir=DIR C header files for non-gcc in DIR [/usr/include]
+ --infodir=DIR info documentation in DIR [PREFIX/info]
+ --mandir=DIR man documentation in DIR [PREFIX/man]
+ --srcdir=DIR find the sources in DIR [configure dir or ..]
+ --program-prefix=PREFIX prepend PREFIX to installed program names
+ --program-suffix=SUFFIX append SUFFIX to installed program names
+ --program-transform-name=PROGRAM
+ run sed PROGRAM on installed program names
+EOF
+ cat << EOF
+Host type:
+ --build=BUILD configure for building on BUILD [BUILD=HOST]
+ --host=HOST configure for HOST [guessed]
+ --target=TARGET configure for TARGET [TARGET=HOST]
+Features and packages:
+ --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
+ --enable-FEATURE[=ARG] include FEATURE [ARG=yes]
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --x-includes=DIR X include files are in DIR
+ --x-libraries=DIR X library files are in DIR
+EOF
+ if test -n "$ac_help"; then
+ echo "--enable and --with options recognized:$ac_help"
+ fi
+ exit 0 ;;
+
+ -host | --host | --hos | --ho)
+ ac_prev=host ;;
+ -host=* | --host=* | --hos=* | --ho=*)
+ host="$ac_optarg" ;;
+
+ -includedir | --includedir | --includedi | --included | --include \
+ | --includ | --inclu | --incl | --inc)
+ ac_prev=includedir ;;
+ -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \
+ | --includ=* | --inclu=* | --incl=* | --inc=*)
+ includedir="$ac_optarg" ;;
+
+ -infodir | --infodir | --infodi | --infod | --info | --inf)
+ ac_prev=infodir ;;
+ -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*)
+ infodir="$ac_optarg" ;;
+
+ -libdir | --libdir | --libdi | --libd)
+ ac_prev=libdir ;;
+ -libdir=* | --libdir=* | --libdi=* | --libd=*)
+ libdir="$ac_optarg" ;;
+
+ -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \
+ | --libexe | --libex | --libe)
+ ac_prev=libexecdir ;;
+ -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \
+ | --libexe=* | --libex=* | --libe=*)
+ libexecdir="$ac_optarg" ;;
+
+ -localstatedir | --localstatedir | --localstatedi | --localstated \
+ | --localstate | --localstat | --localsta | --localst \
+ | --locals | --local | --loca | --loc | --lo)
+ ac_prev=localstatedir ;;
+ -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \
+ | --localstate=* | --localstat=* | --localsta=* | --localst=* \
+ | --locals=* | --local=* | --loca=* | --loc=* | --lo=*)
+ localstatedir="$ac_optarg" ;;
+
+ -mandir | --mandir | --mandi | --mand | --man | --ma | --m)
+ ac_prev=mandir ;;
+ -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*)
+ mandir="$ac_optarg" ;;
+
+ -nfp | --nfp | --nf)
+ # Obsolete; use --without-fp.
+ with_fp=no ;;
+
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c)
+ no_create=yes ;;
+
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r)
+ no_recursion=yes ;;
+
+ -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \
+ | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \
+ | --oldin | --oldi | --old | --ol | --o)
+ ac_prev=oldincludedir ;;
+ -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \
+ | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \
+ | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*)
+ oldincludedir="$ac_optarg" ;;
+
+ -prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
+ ac_prev=prefix ;;
+ -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
+ prefix="$ac_optarg" ;;
+
+ -program-prefix | --program-prefix | --program-prefi | --program-pref \
+ | --program-pre | --program-pr | --program-p)
+ ac_prev=program_prefix ;;
+ -program-prefix=* | --program-prefix=* | --program-prefi=* \
+ | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*)
+ program_prefix="$ac_optarg" ;;
+
+ -program-suffix | --program-suffix | --program-suffi | --program-suff \
+ | --program-suf | --program-su | --program-s)
+ ac_prev=program_suffix ;;
+ -program-suffix=* | --program-suffix=* | --program-suffi=* \
+ | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*)
+ program_suffix="$ac_optarg" ;;
+
+ -program-transform-name | --program-transform-name \
+ | --program-transform-nam | --program-transform-na \
+ | --program-transform-n | --program-transform- \
+ | --program-transform | --program-transfor \
+ | --program-transfo | --program-transf \
+ | --program-trans | --program-tran \
+ | --progr-tra | --program-tr | --program-t)
+ ac_prev=program_transform_name ;;
+ -program-transform-name=* | --program-transform-name=* \
+ | --program-transform-nam=* | --program-transform-na=* \
+ | --program-transform-n=* | --program-transform-=* \
+ | --program-transform=* | --program-transfor=* \
+ | --program-transfo=* | --program-transf=* \
+ | --program-trans=* | --program-tran=* \
+ | --progr-tra=* | --program-tr=* | --program-t=*)
+ program_transform_name="$ac_optarg" ;;
+
+ -q | -quiet | --quiet | --quie | --qui | --qu | --q \
+ | -silent | --silent | --silen | --sile | --sil)
+ silent=yes ;;
+
+ -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
+ ac_prev=sbindir ;;
+ -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
+ | --sbi=* | --sb=*)
+ sbindir="$ac_optarg" ;;
+
+ -sharedstatedir | --sharedstatedir | --sharedstatedi \
+ | --sharedstated | --sharedstate | --sharedstat | --sharedsta \
+ | --sharedst | --shareds | --shared | --share | --shar \
+ | --sha | --sh)
+ ac_prev=sharedstatedir ;;
+ -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \
+ | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \
+ | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \
+ | --sha=* | --sh=*)
+ sharedstatedir="$ac_optarg" ;;
+
+ -site | --site | --sit)
+ ac_prev=site ;;
+ -site=* | --site=* | --sit=*)
+ site="$ac_optarg" ;;
+
+ -site-file | --site-file | --site-fil | --site-fi | --site-f)
+ ac_prev=sitefile ;;
+ -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+ sitefile="$ac_optarg" ;;
+
+ -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
+ ac_prev=srcdir ;;
+ -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
+ srcdir="$ac_optarg" ;;
+
+ -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \
+ | --syscon | --sysco | --sysc | --sys | --sy)
+ ac_prev=sysconfdir ;;
+ -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \
+ | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*)
+ sysconfdir="$ac_optarg" ;;
+
+ -target | --target | --targe | --targ | --tar | --ta | --t)
+ ac_prev=target ;;
+ -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*)
+ target="$ac_optarg" ;;
+
+ -v | -verbose | --verbose | --verbos | --verbo | --verb)
+ verbose=yes ;;
+
+ -version | --version | --versio | --versi | --vers)
+ echo "configure generated by autoconf version 2.13"
+ exit 0 ;;
+
+ -with-* | --with-*)
+ ac_package=`echo $ac_option|sed -e 's/-*with-//' -e 's/=.*//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_package| sed 's/[-_a-zA-Z0-9]//g'`"; then
+ { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+ fi
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ case "$ac_option" in
+ *=*) ;;
+ *) ac_optarg=yes ;;
+ esac
+ eval "with_${ac_package}='$ac_optarg'" ;;
+
+ -without-* | --without-*)
+ ac_package=`echo $ac_option|sed -e 's/-*without-//'`
+ # Reject names that are not valid shell variable names.
+ if test -n "`echo $ac_package| sed 's/[-a-zA-Z0-9_]//g'`"; then
+ { echo "configure: error: $ac_package: invalid package name" 1>&2; exit 1; }
+ fi
+ ac_package=`echo $ac_package| sed 's/-/_/g'`
+ eval "with_${ac_package}=no" ;;
+
+ --x)
+ # Obsolete; use --with-x.
+ with_x=yes ;;
+
+ -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \
+ | --x-incl | --x-inc | --x-in | --x-i)
+ ac_prev=x_includes ;;
+ -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \
+ | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*)
+ x_includes="$ac_optarg" ;;
+
+ -x-libraries | --x-libraries | --x-librarie | --x-librari \
+ | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l)
+ ac_prev=x_libraries ;;
+ -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \
+ | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*)
+ x_libraries="$ac_optarg" ;;
+
+ -*) { echo "configure: error: $ac_option: invalid option; use --help to show usage" 1>&2; exit 1; }
+ ;;
+
+ *)
+ if test -n "`echo $ac_option| sed 's/[-a-z0-9.]//g'`"; then
+ echo "configure: warning: $ac_option: invalid host type" 1>&2
+ fi
+ if test "x$nonopt" != xNONE; then
+ { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; }
+ fi
+ nonopt="$ac_option"
+ ;;
+
+ esac
+done
+
+if test -n "$ac_prev"; then
+ { echo "configure: error: missing argument to --`echo $ac_prev | sed 's/_/-/g'`" 1>&2; exit 1; }
+fi
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+# File descriptor usage:
+# 0 standard input
+# 1 file creation
+# 2 errors and warnings
+# 3 some systems may open it to /dev/tty
+# 4 used on the Kubota Titan
+# 6 checking for... messages and results
+# 5 compiler messages saved in config.log
+if test "$silent" = yes; then
+ exec 6>/dev/null
+else
+ exec 6>&1
+fi
+exec 5>./config.log
+
+echo "\
+This file contains any messages produced by compilers while
+running configure, to aid debugging if configure makes a mistake.
+" 1>&5
+
+# Strip out --no-create and --no-recursion so they do not pile up.
+# Also quote any args containing shell metacharacters.
+ac_configure_args=
+for ac_arg
+do
+ case "$ac_arg" in
+ -no-create | --no-create | --no-creat | --no-crea | --no-cre \
+ | --no-cr | --no-c) ;;
+ -no-recursion | --no-recursion | --no-recursio | --no-recursi \
+ | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) ;;
+ *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?]*)
+ ac_configure_args="$ac_configure_args '$ac_arg'" ;;
+ *) ac_configure_args="$ac_configure_args $ac_arg" ;;
+ esac
+done
+
+# NLS nuisances.
+# Only set these to C if already set. These must not be set unconditionally
+# because not all systems understand e.g. LANG=C (notably SCO).
+# Fixing LC_MESSAGES prevents Solaris sh from translating var values in `set'!
+# Non-C LC_CTYPE values break the ctype check.
+if test "${LANG+set}" = set; then LANG=C; export LANG; fi
+if test "${LC_ALL+set}" = set; then LC_ALL=C; export LC_ALL; fi
+if test "${LC_MESSAGES+set}" = set; then LC_MESSAGES=C; export LC_MESSAGES; fi
+if test "${LC_CTYPE+set}" = set; then LC_CTYPE=C; export LC_CTYPE; fi
+
+# confdefs.h avoids OS command line length limits that DEFS can exceed.
+rm -rf conftest* confdefs.h
+# AIX cpp loses on an empty file, so make sure it contains at least a newline.
+echo > confdefs.h
+
+# A filename unique to this package, relative to the directory that
+# configure is in, which we can look for to find out if srcdir is correct.
+ac_unique_file=setjmp.S
+
+# Find the source files, if location was not specified.
+if test -z "$srcdir"; then
+ ac_srcdir_defaulted=yes
+ # Try the directory containing this script, then its parent.
+ ac_prog=$0
+ ac_confdir=`echo $ac_prog|sed 's%/[^/][^/]*$%%'`
+ test "x$ac_confdir" = "x$ac_prog" && ac_confdir=.
+ srcdir=$ac_confdir
+ if test ! -r $srcdir/$ac_unique_file; then
+ srcdir=..
+ fi
+else
+ ac_srcdir_defaulted=no
+fi
+if test ! -r $srcdir/$ac_unique_file; then
+ if test "$ac_srcdir_defaulted" = yes; then
+ { echo "configure: error: can not find sources in $ac_confdir or .." 1>&2; exit 1; }
+ else
+ { echo "configure: error: can not find sources in $srcdir" 1>&2; exit 1; }
+ fi
+fi
+srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
+
+# Prefer explicitly selected file to automatically selected ones.
+if test -z "$sitefile"; then
+ if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
+ fi
+else
+ CONFIG_SITE="$sitefile"
+fi
+for ac_site_file in $CONFIG_SITE; do
+ if test -r "$ac_site_file"; then
+ echo "loading site script $ac_site_file"
+ . "$ac_site_file"
+ fi
+done
+
+if test -r "$cache_file"; then
+ echo "loading cache $cache_file"
+ . $cache_file
+else
+ echo "creating cache $cache_file"
+ > $cache_file
+fi
+
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
+
+ac_exeext=
+ac_objext=o
+if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then
+ # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu.
+ if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then
+ ac_n= ac_c='
+' ac_t=' '
+ else
+ ac_n=-n ac_c= ac_t=
+ fi
+else
+ ac_n= ac_c='\c' ac_t=
+fi
+
+
+
+ac_aux_dir=
+for ac_dir in ../../../.. $srcdir/../../../..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { echo "configure: error: can not find install-sh or install.sh in ../../../.. $srcdir/../../../.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:580: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
+echo "configure:633: checking whether build environment is sane" >&5
+# Just in case
+sleep 1
+echo timestamp > conftestfile
+# Do `set' in a subshell so we don't clobber the current shell's
+# arguments. Must try -L first in case configure is actually a
+# symlink; some systems play weird games with the mod time of symlinks
+# (eg FreeBSD returns the mod time of the symlink's containing
+# directory).
+if (
+ set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
+ if test "$*" = "X"; then
+ # -L didn't work.
+ set X `ls -t $srcdir/configure conftestfile`
+ fi
+ if test "$*" != "X $srcdir/configure conftestfile" \
+ && test "$*" != "X conftestfile $srcdir/configure"; then
+
+ # If neither matched, then we have a broken ls. This can happen
+ # if, for instance, CONFIG_SHELL is bash and it inherits a
+ # broken ls alias from the environment. This has actually
+ # happened. Such a system could not be considered "sane".
+ { echo "configure: error: ls -t appears to fail. Make sure there is not a broken
+alias in your environment" 1>&2; exit 1; }
+ fi
+
+ test "$2" = conftestfile
+ )
+then
+ # Ok.
+ :
+else
+ { echo "configure: error: newly created file is older than distributed files!
+Check your system clock" 1>&2; exit 1; }
+fi
+rm -f conftest*
+echo "$ac_t""yes" 1>&6
+if test "$program_transform_name" = s,x,x,; then
+ program_transform_name=
+else
+ # Double any \ or $. echo might interpret backslashes.
+ cat <<\EOF_SED > conftestsed
+s,\\,\\\\,g; s,\$,$$,g
+EOF_SED
+ program_transform_name="`echo $program_transform_name|sed -f conftestsed`"
+ rm -f conftestsed
+fi
+test "$program_prefix" != NONE &&
+ program_transform_name="s,^,${program_prefix},; $program_transform_name"
+# Use a double $ so make ignores it.
+test "$program_suffix" != NONE &&
+ program_transform_name="s,\$\$,${program_suffix},; $program_transform_name"
+
+# sed with no file args requires a program.
+test "$program_transform_name" = "" && program_transform_name="s,x,x,"
+
+echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
+echo "configure:690: checking whether ${MAKE-make} sets \${MAKE}" >&5
+set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftestmake <<\EOF
+all:
+ @echo 'ac_maketemp="${MAKE}"'
+EOF
+# GNU make sometimes prints "make[1]: Entering...", which would confuse us.
+eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=`
+if test -n "$ac_maketemp"; then
+ eval ac_cv_prog_make_${ac_make}_set=yes
+else
+ eval ac_cv_prog_make_${ac_make}_set=no
+fi
+rm -f conftestmake
+fi
+if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ SET_MAKE=
+else
+ echo "$ac_t""no" 1>&6
+ SET_MAKE="MAKE=${MAKE-make}"
+fi
+
+if test $host != $build; then
+ ac_tool_prefix=${host_alias}-
+else
+ ac_tool_prefix=
+fi
+
+echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+echo "configure:723: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 728 "configure"
+#include "confdefs.h"
+
+int main() {
+
+#ifndef __CYGWIN__
+#define __CYGWIN__ __CYGWIN32__
+#endif
+return __CYGWIN__;
+; return 0; }
+EOF
+if { (eval echo configure:739: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_cygwin=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_cygwin=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_cygwin" 1>&6
+CYGWIN=
+test "$ac_cv_cygwin" = yes && CYGWIN=yes
+echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
+echo "configure:756: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 761 "configure"
+#include "confdefs.h"
+
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:768: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_mingw32=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_mingw32" 1>&6
+MINGW32=
+test "$ac_cv_mingw32" = yes && MINGW32=yes
+
+# Check whether --enable-multilib or --disable-multilib was given.
+if test "${enable_multilib+set}" = set; then
+ enableval="$enable_multilib"
+ case "${enableval}" in
+ yes) multilib=yes ;;
+ no) multilib=no ;;
+ *) { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
+ esac
+else
+ multilib=yes
+fi
+
+# Check whether --enable-target-optspace or --disable-target-optspace was given.
+if test "${enable_target_optspace+set}" = set; then
+ enableval="$enable_target_optspace"
+ case "${enableval}" in
+ yes) target_optspace=yes ;;
+ no) target_optspace=no ;;
+ *) { echo "configure: error: bad value ${enableval} for target-optspace option" 1>&2; exit 1; } ;;
+ esac
+else
+ target_optspace=
+fi
+
+# Check whether --enable-malloc-debugging or --disable-malloc-debugging was given.
+if test "${enable_malloc_debugging+set}" = set; then
+ enableval="$enable_malloc_debugging"
+ case "${enableval}" in
+ yes) malloc_debugging=yes ;;
+ no) malloc_debugging=no ;;
+ *) { echo "configure: error: bad value ${enableval} for malloc-debugging option" 1>&2; exit 1; } ;;
+ esac
+else
+ malloc_debugging=
+fi
+
+# Check whether --enable-newlib-mb or --disable-newlib-mb was given.
+if test "${enable_newlib_mb+set}" = set; then
+ enableval="$enable_newlib_mb"
+ case "${enableval}" in
+ yes) newlib_mb=yes ;;
+ no) newlib_mb=no ;;
+ *) { echo "configure: error: bad value ${enableval} for newlib-mb option" 1>&2; exit 1; } ;;
+ esac
+else
+ newlib_mb=no
+fi
+
+
+test -z "${with_target_subdir}" && with_target_subdir=.
+
+if test "${srcdir}" = "."; then
+ if test "${with_target_subdir}" != "."; then
+ newlib_basedir="${srcdir}/${with_multisrctop}../../../.."
+ else
+ newlib_basedir="${srcdir}/${with_multisrctop}../../.."
+ fi
+else
+ newlib_basedir="${srcdir}/../../.."
+fi
+
+
+
+# Make sure we can run config.sub.
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
+else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking host system type""... $ac_c" 1>&6
+echo "configure:854: checking host system type" >&5
+
+host_alias=$host
+case "$host_alias" in
+NONE)
+ case $nonopt in
+ NONE)
+ if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
+ else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
+ fi ;;
+ *) host_alias=$nonopt ;;
+ esac ;;
+esac
+
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
+host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$host" 1>&6
+
+
+
+PACKAGE=newlib
+
+VERSION=1.9.0
+
+if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
+ { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; }
+fi
+cat >> confdefs.h <<EOF
+#define PACKAGE "$PACKAGE"
+EOF
+
+cat >> confdefs.h <<EOF
+#define VERSION "$VERSION"
+EOF
+
+
+
+missing_dir=`cd $ac_aux_dir && pwd`
+echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
+echo "configure:895: checking for working aclocal" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (aclocal --version) < /dev/null > /dev/null 2>&1; then
+ ACLOCAL=aclocal
+ echo "$ac_t""found" 1>&6
+else
+ ACLOCAL="$missing_dir/missing aclocal"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
+echo "configure:908: checking for working autoconf" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (autoconf --version) < /dev/null > /dev/null 2>&1; then
+ AUTOCONF=autoconf
+ echo "$ac_t""found" 1>&6
+else
+ AUTOCONF="$missing_dir/missing autoconf"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working automake""... $ac_c" 1>&6
+echo "configure:921: checking for working automake" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (automake --version) < /dev/null > /dev/null 2>&1; then
+ AUTOMAKE=automake
+ echo "$ac_t""found" 1>&6
+else
+ AUTOMAKE="$missing_dir/missing automake"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
+echo "configure:934: checking for working autoheader" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (autoheader --version) < /dev/null > /dev/null 2>&1; then
+ AUTOHEADER=autoheader
+ echo "$ac_t""found" 1>&6
+else
+ AUTOHEADER="$missing_dir/missing autoheader"
+ echo "$ac_t""missing" 1>&6
+fi
+
+echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
+echo "configure:947: checking for working makeinfo" >&5
+# Run test in a subshell; some versions of sh will print an error if
+# an executable is not found, even if stderr is redirected.
+# Redirect stdin to placate older versions of autoconf. Sigh.
+if (makeinfo --version) < /dev/null > /dev/null 2>&1; then
+ MAKEINFO=makeinfo
+ echo "$ac_t""found" 1>&6
+else
+ MAKEINFO="$missing_dir/missing makeinfo"
+ echo "$ac_t""missing" 1>&6
+fi
+
+
+
+# FIXME: We temporarily define our own version of AC_PROG_CC. This is
+# copied from autoconf 2.12, but does not call AC_PROG_CC_WORKS. We
+# are probably using a cross compiler, which will not be able to fully
+# link an executable. This should really be fixed in autoconf
+# itself.
+
+
+
+# Extract the first word of "gcc", so it can be a program name with args.
+set dummy gcc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:972: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_CC="gcc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test -z "$CC"; then
+ # Extract the first word of "cc", so it can be a program name with args.
+set dummy cc; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1002: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$CC"; then
+ ac_cv_prog_CC="$CC" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_prog_rejected=no
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
+ ac_prog_rejected=yes
+ continue
+ fi
+ ac_cv_prog_CC="cc"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+if test $ac_prog_rejected = yes; then
+ # We found a bogon in the path, so make sure we never use it.
+ set dummy $ac_cv_prog_CC
+ shift
+ if test $# -gt 0; then
+ # We chose a different compiler from the bogus one.
+ # However, it has the same basename, so the bogon will be chosen
+ # first if we set CC to just the basename; use the full file name.
+ shift
+ set dummy "$ac_dir/$ac_word" "$@"
+ shift
+ ac_cv_prog_CC="$@"
+ fi
+fi
+fi
+fi
+CC="$ac_cv_prog_CC"
+if test -n "$CC"; then
+ echo "$ac_t""$CC" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+ test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; }
+fi
+
+echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
+echo "configure:1051: checking whether we are using GNU C" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.c <<EOF
+#ifdef __GNUC__
+ yes;
+#endif
+EOF
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1060: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+ ac_cv_prog_gcc=yes
+else
+ ac_cv_prog_gcc=no
+fi
+fi
+
+echo "$ac_t""$ac_cv_prog_gcc" 1>&6
+
+if test $ac_cv_prog_gcc = yes; then
+ GCC=yes
+ ac_test_CFLAGS="${CFLAGS+set}"
+ ac_save_CFLAGS="$CFLAGS"
+ CFLAGS=
+ echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
+echo "configure:1075: checking whether ${CC-cc} accepts -g" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'void f(){}' > conftest.c
+if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then
+ ac_cv_prog_cc_g=yes
+else
+ ac_cv_prog_cc_g=no
+fi
+rm -f conftest*
+
+fi
+
+echo "$ac_t""$ac_cv_prog_cc_g" 1>&6
+ if test "$ac_test_CFLAGS" = set; then
+ CFLAGS="$ac_save_CFLAGS"
+ elif test $ac_cv_prog_cc_g = yes; then
+ CFLAGS="-g -O2"
+ else
+ CFLAGS="-O2"
+ fi
+else
+ GCC=
+ test "${CFLAGS+set}" = set || CFLAGS="-g"
+fi
+
+
+# AC_CHECK_TOOL does AC_REQUIRE (AC_CANONICAL_BUILD). If we don't
+# run it explicitly here, it will be run implicitly before
+# NEWLIB_CONFIGURE, which doesn't work because that means that it will
+# be run before AC_CANONICAL_HOST.
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:1108: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+
+# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
+set dummy ${ac_tool_prefix}as; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1129: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AS"; then
+ ac_cv_prog_AS="$AS" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AS="${ac_tool_prefix}as"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="as"
+fi
+fi
+AS="$ac_cv_prog_AS"
+if test -n "$AS"; then
+ echo "$ac_t""$AS" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+
+# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ar; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1161: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$AR"; then
+ ac_cv_prog_AR="$AR" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_AR="${ac_tool_prefix}ar"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_AR" && ac_cv_prog_AR="ar"
+fi
+fi
+AR="$ac_cv_prog_AR"
+if test -n "$AR"; then
+ echo "$ac_t""$AR" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+
+# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
+set dummy ${ac_tool_prefix}ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1193: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
+if test -z "$ac_cv_prog_RANLIB"; then
+if test -n "$ac_tool_prefix"; then
+ # Extract the first word of "ranlib", so it can be a program name with args.
+set dummy ranlib; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:1225: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$RANLIB"; then
+ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_RANLIB="ranlib"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+ test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":"
+fi
+fi
+RANLIB="$ac_cv_prog_RANLIB"
+if test -n "$RANLIB"; then
+ echo "$ac_t""$RANLIB" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+else
+ RANLIB=":"
+fi
+fi
+
+
+# Find a good install program. We prefer a C program (faster),
+# so one script is as good as another. But avoid the broken or
+# incompatible versions:
+# SysV /etc/install, /usr/sbin/install
+# SunOS /usr/etc/install
+# IRIX /sbin/install
+# AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
+# AFS /usr/afsws/bin/install, which mishandles nonexistent args
+# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
+# ./install, which can be erroneously created by make from ./install.sh.
+echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
+echo "configure:1270: checking for a BSD compatible install" >&5
+if test -z "$INSTALL"; then
+if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":"
+ for ac_dir in $PATH; do
+ # Account for people who put trailing slashes in PATH elements.
+ case "$ac_dir/" in
+ /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
+ *)
+ # OSF1 and SCO ODT 3.0 have their own names for install.
+ # Don't use installbsd from OSF since it installs stuff as root
+ # by default.
+ for ac_prog in ginstall scoinst install; do
+ if test -f $ac_dir/$ac_prog; then
+ if test $ac_prog = install &&
+ grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
+ # AIX install. It has an incompatible calling convention.
+ :
+ else
+ ac_cv_path_install="$ac_dir/$ac_prog -c"
+ break 2
+ fi
+ fi
+ done
+ ;;
+ esac
+ done
+ IFS="$ac_save_IFS"
+
+fi
+ if test "${ac_cv_path_install+set}" = set; then
+ INSTALL="$ac_cv_path_install"
+ else
+ # As a last resort, use the slow shell script. We don't cache a
+ # path for INSTALL within a source directory, because that will
+ # break other packages using the cache if that directory is
+ # removed, or if the path is relative.
+ INSTALL="$ac_install_sh"
+ fi
+fi
+echo "$ac_t""$INSTALL" 1>&6
+
+# Use test -z because SunOS4 sh mishandles braces in ${var-val}.
+# It thinks the first close brace ends the variable substitution.
+test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
+test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
+
+
+echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
+echo "configure:1324: checking whether to enable maintainer-specific portions of Makefiles" >&5
+ # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+ enableval="$enable_maintainer_mode"
+ USE_MAINTAINER_MODE=$enableval
+else
+ USE_MAINTAINER_MODE=no
+fi
+
+ echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6
+
+
+if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
+else
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
+fi
+ MAINT=$MAINTAINER_MODE_TRUE
+
+
+
+# We need AC_EXEEXT to keep automake happy in cygnus mode. However,
+# at least currently, we never actually build a program, so we never
+# need to use $(EXEEXT). Moreover, the test for EXEEXT normally
+# fails, because we are probably configuring with a cross compiler
+# which can't create executables. So we include AC_EXEEXT to keep
+# automake happy, but we don't execute it, since we don't care about
+# the result.
+if false; then
+
+
+echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
+echo "configure:1358: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+ ac_cv_exeext=.exe
+else
+ rm -f conftest*
+ echo 'int main () { return 0; }' > conftest.$ac_ext
+ ac_cv_exeext=
+ if { (eval echo configure:1368: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ for file in conftest.*; do
+ case $file in
+ *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+ *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+ esac
+ done
+ else
+ { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+ fi
+ rm -f conftest*
+ test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
+fi
+fi
+
+EXEEXT=""
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
+
+fi
+
+. ${newlib_basedir}/configure.host
+
+case ${newlib_basedir} in
+/* | A-Za-z:/\\*) newlib_flagbasedir=${newlib_basedir} ;;
+*) newlib_flagbasedir='$(top_builddir)/'${newlib_basedir} ;;
+esac
+
+newlib_cflags="${newlib_cflags} -I"'$(top_builddir)'"/../../../targ-include -I${newlib_flagbasedir}/libc/include"
+case "${host}" in
+ *-*-cygwin*)
+ newlib_cflags="${newlib_cflags} -I${newlib_flagbasedir}/../winsup/cygwin/include -I${newlib_flagbasedir}/../winsup/w32api/include"
+ ;;
+esac
+
+newlib_cflags="${newlib_cflags} -fno-builtin"
+
+NEWLIB_CFLAGS=${newlib_cflags}
+
+
+
+
+
+
+trap '' 1 2 15
+cat > confcache <<\EOF
+# This file is a shell script that caches the results of configure
+# tests run on this system so they can be shared between configure
+# scripts and configure runs. It is not useful on other systems.
+# If it contains results you don't want to keep, you may remove or edit it.
+#
+# By default, configure uses ./config.cache as the cache file,
+# creating it if it does not exist already. You can give configure
+# the --cache-file=FILE option to use a different cache file; that is
+# what configure does when it calls configure scripts in
+# subdirectories, so they share the cache.
+# Giving --cache-file=/dev/null disables caching, for debugging configure.
+# config.status only pays attention to the cache file if you give it the
+# --recheck option to rerun configure.
+#
+EOF
+# The following way of writing the cache mishandles newlines in values,
+# but we know of no workaround that is simple, portable, and efficient.
+# So, don't put newlines in cache variables' values.
+# Ultrix sh set writes to stderr and can't be redirected directly,
+# and sets the high bit in the cache file unless we assign to the vars.
+(set) 2>&1 |
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
+ *ac_space=\ *)
+ # `set' does not quote correctly, so add quotes (double-quote substitution
+ # turns \\\\ into \\, and sed turns \\ into \).
+ sed -n \
+ -e "s/'/'\\\\''/g" \
+ -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p"
+ ;;
+ *)
+ # `set' quotes correctly as required by POSIX, so do not add quotes.
+ sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p'
+ ;;
+ esac >> confcache
+if cmp -s $cache_file confcache; then
+ :
+else
+ if test -w $cache_file; then
+ echo "updating cache $cache_file"
+ cat confcache > $cache_file
+ else
+ echo "not updating unwritable cache $cache_file"
+ fi
+fi
+rm -f confcache
+
+trap 'rm -fr conftest* confdefs* core core.* *.core $ac_clean_files; exit 1' 1 2 15
+
+test "x$prefix" = xNONE && prefix=$ac_default_prefix
+# Let make expand exec_prefix.
+test "x$exec_prefix" = xNONE && exec_prefix='${prefix}'
+
+# Any assignment to VPATH causes Sun make to only execute
+# the first set of double-colon rules, so remove it if not needed.
+# If there is a colon in the path, we need to keep it.
+if test "x$srcdir" = x.; then
+ ac_vpsub='/^[ ]*VPATH[ ]*=[^:]*$/d'
+fi
+
+trap 'rm -f $CONFIG_STATUS conftest*; exit 1' 1 2 15
+
+# Transform confdefs.h into DEFS.
+# Protect against shell expansion while executing Makefile rules.
+# Protect against Makefile macro expansion.
+cat > conftest.defs <<\EOF
+s%#define \([A-Za-z_][A-Za-z0-9_]*\) *\(.*\)%-D\1=\2%g
+s%[ `~#$^&*(){}\\|;'"<>?]%\\&%g
+s%\[%\\&%g
+s%\]%\\&%g
+s%\$%$$%g
+EOF
+DEFS=`sed -f conftest.defs confdefs.h | tr '\012' ' '`
+rm -f conftest.defs
+
+
+# Without the "./", some shells look in PATH for config.status.
+: ${CONFIG_STATUS=./config.status}
+
+echo creating $CONFIG_STATUS
+rm -f $CONFIG_STATUS
+cat > $CONFIG_STATUS <<EOF
+#! /bin/sh
+# Generated automatically by configure.
+# Run this file to recreate the current configuration.
+# This directory was configured as follows,
+# on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
+#
+# $0 $ac_configure_args
+#
+# Compiler output produced by configure, useful for debugging
+# configure, is in ./config.log if it exists.
+
+ac_cs_usage="Usage: $CONFIG_STATUS [--recheck] [--version] [--help]"
+for ac_option
+do
+ case "\$ac_option" in
+ -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r)
+ echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
+ exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
+ -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
+ echo "$CONFIG_STATUS generated by autoconf version 2.13"
+ exit 0 ;;
+ -help | --help | --hel | --he | --h)
+ echo "\$ac_cs_usage"; exit 0 ;;
+ *) echo "\$ac_cs_usage"; exit 1 ;;
+ esac
+done
+
+ac_given_srcdir=$srcdir
+ac_given_INSTALL="$INSTALL"
+
+trap 'rm -fr `echo "Makefile" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+# Protect against being on the right side of a sed subst in config.status.
+sed 's/%@/@@/; s/@%/@@/; s/%g\$/@g/; /@g\$/s/[\\\\&%]/\\\\&/g;
+ s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
+$ac_vpsub
+$extrasub
+s%@SHELL@%$SHELL%g
+s%@CFLAGS@%$CFLAGS%g
+s%@CPPFLAGS@%$CPPFLAGS%g
+s%@CXXFLAGS@%$CXXFLAGS%g
+s%@FFLAGS@%$FFLAGS%g
+s%@DEFS@%$DEFS%g
+s%@LDFLAGS@%$LDFLAGS%g
+s%@LIBS@%$LIBS%g
+s%@exec_prefix@%$exec_prefix%g
+s%@prefix@%$prefix%g
+s%@program_transform_name@%$program_transform_name%g
+s%@bindir@%$bindir%g
+s%@sbindir@%$sbindir%g
+s%@libexecdir@%$libexecdir%g
+s%@datadir@%$datadir%g
+s%@sysconfdir@%$sysconfdir%g
+s%@sharedstatedir@%$sharedstatedir%g
+s%@localstatedir@%$localstatedir%g
+s%@libdir@%$libdir%g
+s%@includedir@%$includedir%g
+s%@oldincludedir@%$oldincludedir%g
+s%@infodir@%$infodir%g
+s%@mandir@%$mandir%g
+s%@newlib_basedir@%$newlib_basedir%g
+s%@host@%$host%g
+s%@host_alias@%$host_alias%g
+s%@host_cpu@%$host_cpu%g
+s%@host_vendor@%$host_vendor%g
+s%@host_os@%$host_os%g
+s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
+s%@INSTALL_DATA@%$INSTALL_DATA%g
+s%@PACKAGE@%$PACKAGE%g
+s%@VERSION@%$VERSION%g
+s%@ACLOCAL@%$ACLOCAL%g
+s%@AUTOCONF@%$AUTOCONF%g
+s%@AUTOMAKE@%$AUTOMAKE%g
+s%@AUTOHEADER@%$AUTOHEADER%g
+s%@MAKEINFO@%$MAKEINFO%g
+s%@SET_MAKE@%$SET_MAKE%g
+s%@CC@%$CC%g
+s%@build@%$build%g
+s%@build_alias@%$build_alias%g
+s%@build_cpu@%$build_cpu%g
+s%@build_vendor@%$build_vendor%g
+s%@build_os@%$build_os%g
+s%@AS@%$AS%g
+s%@AR@%$AR%g
+s%@RANLIB@%$RANLIB%g
+s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g
+s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g
+s%@MAINT@%$MAINT%g
+s%@EXEEXT@%$EXEEXT%g
+s%@NEWLIB_CFLAGS@%$NEWLIB_CFLAGS%g
+s%@machine_dir@%$machine_dir%g
+s%@sys_dir@%$sys_dir%g
+
+CEOF
+EOF
+
+cat >> $CONFIG_STATUS <<\EOF
+
+# Split the substitutions into bite-sized pieces for seds with
+# small command number limits, like on Digital OSF/1 and HP-UX.
+ac_max_sed_cmds=90 # Maximum number of lines to put in a sed script.
+ac_file=1 # Number of current file.
+ac_beg=1 # First line for current file.
+ac_end=$ac_max_sed_cmds # Line after last line for current file.
+ac_more_lines=:
+ac_sed_cmds=""
+while $ac_more_lines; do
+ if test $ac_beg -gt 1; then
+ sed "1,${ac_beg}d; ${ac_end}q" conftest.subs > conftest.s$ac_file
+ else
+ sed "${ac_end}q" conftest.subs > conftest.s$ac_file
+ fi
+ if test ! -s conftest.s$ac_file; then
+ ac_more_lines=false
+ rm -f conftest.s$ac_file
+ else
+ if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds="sed -f conftest.s$ac_file"
+ else
+ ac_sed_cmds="$ac_sed_cmds | sed -f conftest.s$ac_file"
+ fi
+ ac_file=`expr $ac_file + 1`
+ ac_beg=$ac_end
+ ac_end=`expr $ac_end + $ac_max_sed_cmds`
+ fi
+done
+if test -z "$ac_sed_cmds"; then
+ ac_sed_cmds=cat
+fi
+EOF
+
+cat >> $CONFIG_STATUS <<EOF
+
+CONFIG_FILES=\${CONFIG_FILES-"Makefile"}
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
+ # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in".
+ case "$ac_file" in
+ *:*) ac_file_in=`echo "$ac_file"|sed 's%[^:]*:%%'`
+ ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
+ *) ac_file_in="${ac_file}.in" ;;
+ esac
+
+ # Adjust a relative srcdir, top_srcdir, and INSTALL for subdirectories.
+
+ # Remove last slash and all that follows it. Not all systems have dirname.
+ ac_dir=`echo $ac_file|sed 's%/[^/][^/]*$%%'`
+ if test "$ac_dir" != "$ac_file" && test "$ac_dir" != .; then
+ # The file is in a subdirectory.
+ test ! -d "$ac_dir" && mkdir "$ac_dir"
+ ac_dir_suffix="/`echo $ac_dir|sed 's%^\./%%'`"
+ # A "../" for each directory in $ac_dir_suffix.
+ ac_dots=`echo $ac_dir_suffix|sed 's%/[^/]*%../%g'`
+ else
+ ac_dir_suffix= ac_dots=
+ fi
+
+ case "$ac_given_srcdir" in
+ .) srcdir=.
+ if test -z "$ac_dots"; then top_srcdir=.
+ else top_srcdir=`echo $ac_dots|sed 's%/$%%'`; fi ;;
+ /*) srcdir="$ac_given_srcdir$ac_dir_suffix"; top_srcdir="$ac_given_srcdir" ;;
+ *) # Relative path.
+ srcdir="$ac_dots$ac_given_srcdir$ac_dir_suffix"
+ top_srcdir="$ac_dots$ac_given_srcdir" ;;
+ esac
+
+ case "$ac_given_INSTALL" in
+ [/$]*) INSTALL="$ac_given_INSTALL" ;;
+ *) INSTALL="$ac_dots$ac_given_INSTALL" ;;
+ esac
+
+ echo creating "$ac_file"
+ rm -f "$ac_file"
+ configure_input="Generated automatically from `echo $ac_file_in|sed 's%.*/%%'` by configure."
+ case "$ac_file" in
+ *Makefile*) ac_comsub="1i\\
+# $configure_input" ;;
+ *) ac_comsub= ;;
+ esac
+
+ ac_file_inputs=`echo $ac_file_in|sed -e "s%^%$ac_given_srcdir/%" -e "s%:% $ac_given_srcdir/%g"`
+ sed -e "$ac_comsub
+s%@configure_input@%$configure_input%g
+s%@srcdir@%$srcdir%g
+s%@top_srcdir@%$top_srcdir%g
+s%@INSTALL@%$INSTALL%g
+" $ac_file_inputs | (eval "$ac_sed_cmds") > $ac_file
+fi; done
+rm -f conftest.s*
+
+EOF
+cat >> $CONFIG_STATUS <<EOF
+
+EOF
+cat >> $CONFIG_STATUS <<\EOF
+
+exit 0
+EOF
+chmod +x $CONFIG_STATUS
+rm -fr confdefs* $ac_clean_files
+test "$no_create" = yes || ${CONFIG_SHELL-/bin/sh} $CONFIG_STATUS || exit 1
+
--- /dev/null
+dnl This is the newlib/libc/machine/calmrisc16 configure.in file.
+dnl Process this file with autoconf to produce a configure script.
+
+AC_PREREQ(2.5)
+AC_INIT(setjmp.S)
+
+dnl Can't be done in NEWLIB_CONFIGURE because that confuses automake.
+AC_CONFIG_AUX_DIR(../../../..)
+
+NEWLIB_CONFIGURE(../../..)
+
+AC_OUTPUT(Makefile)
--- /dev/null
+;; xstormy16
+;; Copyright (C) 2001 by Red Hat, Incorporated. All rights reserved.
+;;
+;; Permission to use, copy, modify, and distribute this software
+;; is freely granted, provided that this notice is preserved.
+;;
+ .file "setjmp.S"
+
+ .section .text
+ .align 1
+ .global setjmp
+ .type setjmp,@function
+setjmp:
+ mov r0,r10
+ mov (r2++),r0
+ mov r0,r11
+ mov (r2++),r0
+ mov r0,r12
+ mov (r2++),r0
+ mov r0,r13
+ mov (r2++),r0
+ pop r0 ; PC high word
+ pop r1 ; PC low word
+ mov (r2++), r0
+ mov (r2++), r1
+ mov r3,sp
+ mov (r2++),r3
+ mov.w r2,#0
+ mov r8, r0
+ mov r9, r1
+ jmp r8, r9
+ .size setjmp,.-setjmp
+
+ .global longjmp
+ .type longjmp,@function
+longjmp:
+ mov r0,(r2++)
+ mov r10,r0
+ mov r0,(r2++)
+ mov r11,r0
+ mov r0,(r2++)
+ mov r12,r0
+ mov r0,(r2++)
+ mov r13,r0
+ mov r0,(r2++)
+ mov r8, r0
+ mov r1,(r2++)
+ mov r9, r1
+ mov r4,(r2++)
+ mov sp,r4
+;; status arg (r3) to longjmp is return value
+;; if it's zero, return 1
+ bnz r3, #0, 0f
+ mov.w r3,#1
+0: mov r2, r3
+ jmp r8,r9
+ .size longjmp,.-longjmp
OSDN Git Service
