OSDN Git Service

* configure.in (alpha-linux*, alpha-netbsd) [extra_parts]:
authorrth <rth@138bc75d-0d04-0410-961f-82ee72b054a4>
Thu, 17 Feb 2000 09:47:43 +0000 (09:47 +0000)
committerrth <rth@138bc75d-0d04-0410-961f-82ee72b054a4>
Thu, 17 Feb 2000 09:47:43 +0000 (09:47 +0000)
        Add crtbeginS.o and crtendS.o.
        * alpha/elf.h (STARTFILE_SPEC): Use crtbeginS.o.
        (ENDFILE_SPEC): Use crtendS.o.
        * alpha/t-crtbe (crtbeginS.o, crtendS.o): New targets.

        * alpha/crtbegin.asm (__do_frame_takedown): Merge into ...
        (__do_global_dtors_aux): ... here.  Call __cxa_finalize if
        shared and present.
        (__dso_handle): New variable.
        * alpha/crtend.asm (__do_global_ctors_aux): Remove runtime
        bias to __CTOR_END__.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@32033 138bc75d-0d04-0410-961f-82ee72b054a4

gcc/ChangeLog
gcc/config/alpha/crtbegin.asm
gcc/config/alpha/crtend.asm
gcc/config/alpha/elf.h
gcc/config/alpha/t-crtbe
gcc/configure
gcc/configure.in

index e6ff98d..43e5842 100644 (file)
@@ -1,5 +1,20 @@
 2000-02-16  Richard Henderson  <rth@cygnus.com>
 
+       * configure.in (alpha-linux*, alpha-netbsd) [extra_parts]:
+       Add crtbeginS.o and crtendS.o.
+       * alpha/elf.h (STARTFILE_SPEC): Use crtbeginS.o.
+       (ENDFILE_SPEC): Use crtendS.o.
+       * alpha/t-crtbe (crtbeginS.o, crtendS.o): New targets.
+
+       * alpha/crtbegin.asm (__do_frame_takedown): Merge into ...
+       (__do_global_dtors_aux): ... here.  Call __cxa_finalize if
+       shared and present.
+       (__dso_handle): New variable.
+       * alpha/crtend.asm (__do_global_ctors_aux): Remove runtime
+       bias to __CTOR_END__.
+       
+2000-02-16  Richard Henderson  <rth@cygnus.com>
+
        * Makefile.in (s-crtS, crtbeginS, crtendS): Prefix usage with $(T).
 
 Wed Feb 16 21:40:04 2000  Hans-Peter Nilsson  <hp@bitrange.com>
index f954f1a..4cc868d 100644 (file)
@@ -69,11 +69,6 @@ __EH_FRAME_BEGIN__:
 1:     ldgp    $29,0($29)
        jsr     $26,__do_global_dtors_aux
 
-       # Ideally this call would go in crtend.o, except that we can't
-       # get hold of __EH_FRAME_BEGIN__ there.
-
-       jsr     $26,__do_frame_takedown
-
        # Must match the alignment we got from crti.o else we get
        # zero-filled holes in our _fini function and then SIGILL.
        .align 3
@@ -92,10 +87,29 @@ __EH_FRAME_BEGIN__:
  # Invoke our destructors in order.
  #
 
-.data
+.section .sdata
 
  # Support recursive calls to exit.
-$ptr:  .quad   __DTOR_LIST__
+       .type dtor_ptr,@object
+       .size dtor_ptr,8
+dtor_ptr:
+       .quad   __DTOR_LIST__ + 8
+
+ # A globally unique widget for c++ local destructors to hang off.
+       .global __dso_handle
+       .type __dso_handle,@object
+       .size __dso_handle,8
+#ifdef SHARED
+.section .data
+       .align 3
+__dso_handle:
+       .quad   __dso_handle
+#else
+.section .bss
+       .align 3
+__dso_handle:
+       .zero 8
+#endif
 
 .text
 
@@ -103,23 +117,41 @@ $ptr:     .quad   __DTOR_LIST__
        .ent __do_global_dtors_aux
 
 __do_global_dtors_aux:
+       ldgp    $29,0($27)
        lda     $30,-16($30)
        .frame  $30,16,$26,0
        stq     $9,8($30)
        stq     $26,0($30)
        .mask   0x4000200,-16
-       .prologue 0
+       .prologue 1
 
-       lda     $9,$ptr
-       br      1f
-0:     stq     $1,0($9)
+#ifdef SHARED
+       # Do c++ local destructors.
+       lda     $1,__cxa_finalize
+       beq     $1,0f
+       lda     $16,__dso_handle
+       jsr     $26,__cxa_finalize
+       ldgp    $29,0($26)
+#endif
+
+0:     lda     $9,dtor_ptr
+       br      2f
+1:     stq     $1,0($9)
        jsr     $26,($27)
-1:     ldq     $1,0($9)
-       ldq     $27,8($1)
+       ldgp    $29,0($26)
+2:     ldq     $1,0($9)
+       ldq     $27,0($1)
        addq    $1,8,$1
-       bne     $27,0b
+       bne     $27,1b
 
-       ldq     $26,0($30)
+       # Remove our frame info.
+       lda     $1,__deregister_frame_info
+       beq     $1,3f
+       lda     $16,__EH_FRAME_BEGIN__
+       jsr     $26,__deregister_frame_info
+       ldgp    $29,0($26)
+
+3:     ldq     $26,0($30)
        ldq     $9,8($30)
        lda     $30,16($30)
        ret
@@ -133,11 +165,11 @@ __do_global_dtors_aux:
  # ??? How can we rationally keep this size correct?
 
 .section .bss
-       .type $object,@object
+       .type frame_object,@object
+       .size frame_object, 48
        .align 3
-$object:
+frame_object:
        .zero 48
-       .size $object, 48
 
 .text 
 
@@ -155,38 +187,18 @@ __do_frame_setup:
        lda     $1,__register_frame_info
        beq     $1,0f
        lda     $16,__EH_FRAME_BEGIN__
-       lda     $17,$object
+       lda     $17,frame_object
        jsr     $26,__register_frame_info
-       ldq     $26,0($30)
-0:     lda     $30,16($30)
-       ret
-
-       .end __do_frame_setup
+       ldgp    $29,0($26)
 
- #
- # Remove our frame info.
- #
-
-       .align 3
-       .ent __do_frame_takedown
-
-__do_frame_takedown:
-       ldgp    $29,0($27)
-       lda     $30,-16($30)
-       .frame  $30,16,$26,0
-       stq     $26,0($30)
-       .mask   0x4000000,-16
-       .prologue 1
-
-       lda     $1,__deregister_frame_info
-       beq     $1,0f
-       lda     $16,__EH_FRAME_BEGIN__
-       jsr     $26,__deregister_frame_info
        ldq     $26,0($30)
 0:     lda     $30,16($30)
        ret
 
-       .end __do_frame_takedown
+       .end __do_frame_setup
 
 .weak __register_frame_info
 .weak __deregister_frame_info
+#ifdef SHARED
+.weak __cxa_finalize
+#endif
index 4a0cc5e..d6eb406 100644 (file)
@@ -92,10 +92,10 @@ __do_global_ctors_aux:
        .mask   0x4000200,-16
        .prologue 1
 
-       lda     $9,__CTOR_END__
+       lda     $9,__CTOR_END__-8
        br      1f
 0:     jsr     $26,($27)
-1:     ldq     $27,-8($9)
+1:     ldq     $27,0($9)
        subq    $9,8,$9
        not     $27,$0
        bne     $0,0b
index 364788b..20a694a 100644 (file)
@@ -507,19 +507,18 @@ void FN ()                                        \
 
 /* Provide a STARTFILE_SPEC appropriate for ELF.  Here we add the
    (even more) magical crtbegin.o file which provides part of the
-   support for getting C++ file-scope static object constructed before
-   entering `main'. 
+   support for getting C++ file-scope static object constructed
+   before entering `main'. 
 
-   Don't bother seeing crtstuff.c -- there is absolutely no hope of
-   getting that file to understand multiple GPs.  GNU Libc provides a
-   hand-coded version that is used on Linux; it could be copied here
-   if there is ever a need. */
+   Don't bother seeing crtstuff.c -- there is absolutely no hope
+   of getting that file to understand multiple GPs.  We provide a
+   hand-coded assembly version.  */
    
 #undef STARTFILE_SPEC
 #define STARTFILE_SPEC \
   "%{!shared: \
      %{pg:gcrt1.o%s} %{!pg:%{p:gcrt1.o%s} %{!p:crt1.o%s}}}\
-   crti.o%s crtbegin.o%s"
+   crti.o%s %{shared:crtbeginS.o%s}%{!shared:crtbegin.o%s}"
 
 /* Provide a ENDFILE_SPEC appropriate for ELF.  Here we tack on the
    magical crtend.o file which provides part of the support for
@@ -528,7 +527,7 @@ void FN ()                                  \
 
 #undef ENDFILE_SPEC
 #define ENDFILE_SPEC \
-  "crtend.o%s crtn.o%s"
+  "%{shared:crtendS.o%s}%{!shared:crtend.o%s} crtn.o%s"
 
 /* We support #pragma.  */
 #define HANDLE_SYSV_PRAGMA
index 5e82b92..b8d3fac 100644 (file)
@@ -3,7 +3,10 @@ T = disable
 
 # Assemble startup files.
 crtbegin.o: $(srcdir)/config/alpha/crtbegin.asm $(GCC_PASSES)
-       $(GCC_FOR_TARGET) -c -o crtbegin.o -x assembler $(srcdir)/config/alpha/crtbegin.asm
-
+       $(GCC_FOR_TARGET) -c -o crtbegin.o -x assembler-with-cpp $(srcdir)/config/alpha/crtbegin.asm
 crtend.o: $(srcdir)/config/alpha/crtend.asm $(GCC_PASSES)
-       $(GCC_FOR_TARGET) -c -o crtend.o -x assembler $(srcdir)/config/alpha/crtend.asm
+       $(GCC_FOR_TARGET) -c -o crtend.o -x assembler-with-cpp $(srcdir)/config/alpha/crtend.asm
+crtbeginS.o: $(srcdir)/config/alpha/crtbegin.asm $(GCC_PASSES)
+       $(GCC_FOR_TARGET) -DSHARED -c -o crtbeginS.o -x assembler-with-cpp $(srcdir)/config/alpha/crtbegin.asm
+crtendS.o: $(srcdir)/config/alpha/crtend.asm $(GCC_PASSES)
+       $(GCC_FOR_TARGET) -DSHARED -c -o crtendS.o -x assembler-with-cpp $(srcdir)/config/alpha/crtend.asm
index 0056b35..f360c93 100755 (executable)
@@ -96,6 +96,7 @@ program_suffix=NONE
 program_transform_name=s,x,x,
 silent=
 site=
+sitefile=
 srcdir=
 target=NONE
 verbose=
@@ -210,6 +211,7 @@ Configuration:
   --help                  print this message
   --no-create             do not create output files
   --quiet, --silent       do not print \`checking...' messages
+  --site-file=FILE        use FILE as the site file
   --version               print the version of autoconf that created configure
 Directory and file names:
   --prefix=PREFIX         install architecture-independent files in PREFIX
@@ -380,6 +382,11 @@ EOF
   -site=* | --site=* | --sit=*)
     site="$ac_optarg" ;;
 
+  -site-file | --site-file | --site-fil | --site-fi | --site-f)
+    ac_prev=sitefile ;;
+  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+    sitefile="$ac_optarg" ;;
+
   -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
     ac_prev=srcdir ;;
   -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
@@ -545,12 +552,16 @@ fi
 srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
 
 # Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
-  if test "x$prefix" != xNONE; then
-    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-  else
-    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+  if test -z "$CONFIG_SITE"; then
+    if test "x$prefix" != xNONE; then
+      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+    else
+      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+    fi
   fi
+else
+  CONFIG_SITE="$sitefile"
 fi
 for ac_site_file in $CONFIG_SITE; do
   if test -r "$ac_site_file"; then
@@ -605,7 +616,7 @@ copy=cp
 # - two terminals occur directly after each other
 # - the path contains an element with a dot in it
 echo $ac_n "checking LIBRARY_PATH variable""... $ac_c" 1>&6
-echo "configure:609: checking LIBRARY_PATH variable" >&5
+echo "configure:620: checking LIBRARY_PATH variable" >&5
 case ${LIBRARY_PATH} in
   [:\;]* | *[:\;] | *[:\;][:\;]* |  *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
     library_path_setting="contains current directory"
@@ -630,7 +641,7 @@ fi
 # - two terminals occur directly after each other
 # - the path contains an element with a dot in it
 echo $ac_n "checking GCC_EXEC_PREFIX variable""... $ac_c" 1>&6
-echo "configure:634: checking GCC_EXEC_PREFIX variable" >&5
+echo "configure:645: checking GCC_EXEC_PREFIX variable" >&5
 case ${GCC_EXEC_PREFIX} in
   [:\;]* | *[:\;] | *[:\;][:\;]* |  *[:\;]. | .[:\;]*| . | *[:\;].[:\;]* )
     gcc_exec_prefix_setting="contains current directory"
@@ -980,7 +991,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:984: checking host system type" >&5
+echo "configure:995: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -1001,7 +1012,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:1005: checking target system type" >&5
+echo "configure:1016: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -1019,7 +1030,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1023: checking build system type" >&5
+echo "configure:1034: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -1046,7 +1057,7 @@ test "$host_alias" != "$target_alias" &&
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1050: checking for $ac_word" >&5
+echo "configure:1061: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1076,7 +1087,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1080: checking for $ac_word" >&5
+echo "configure:1091: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1127,7 +1138,7 @@ fi
       # Extract the first word of "cl", so it can be a program name with args.
 set dummy cl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1131: checking for $ac_word" >&5
+echo "configure:1142: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1159,7 +1170,7 @@ fi
 fi
 
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1163: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1174: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -1170,12 +1181,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 1174 "configure"
+#line 1185 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:1179: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1190: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -1201,12 +1212,12 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1205: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1216: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1210: checking whether we are using GNU C" >&5
+echo "configure:1221: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1215,7 +1226,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1219: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1230: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -1234,7 +1245,7 @@ ac_test_CFLAGS="${CFLAGS+set}"
 ac_save_CFLAGS="$CFLAGS"
 CFLAGS=
 echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1238: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1249: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1266,7 +1277,7 @@ else
 fi
 
 echo $ac_n "checking for long double""... $ac_c" 1>&6
-echo "configure:1270: checking for long double" >&5
+echo "configure:1281: checking for long double" >&5
 if eval "test \"`echo '$''{'gcc_cv_c_long_double'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1274,7 +1285,7 @@ else
   gcc_cv_c_long_double=yes
 else
 cat > conftest.$ac_ext <<EOF
-#line 1278 "configure"
+#line 1289 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -1284,7 +1295,7 @@ long double foo = 0.0;
 switch (0) case 0: case (sizeof(long double) >= sizeof(double)):;
 ; return 0; }
 EOF
-if { (eval echo configure:1288: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1299: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_c_long_double=yes
 else
@@ -1317,7 +1328,7 @@ fi
 
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:1321: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:1332: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1345,7 +1356,7 @@ fi
 
 
 echo $ac_n "checking whether a default assembler was specified""... $ac_c" 1>&6
-echo "configure:1349: checking whether a default assembler was specified" >&5
+echo "configure:1360: checking whether a default assembler was specified" >&5
 if test x"${DEFAULT_ASSEMBLER+set}" = x"set"; then
     if test x"$gas_flag" = x"no"; then
        echo "$ac_t""yes ($DEFAULT_ASSEMBLER)" 1>&6
@@ -1357,7 +1368,7 @@ else
 fi
 
 echo $ac_n "checking whether a default linker was specified""... $ac_c" 1>&6
-echo "configure:1361: checking whether a default linker was specified" >&5
+echo "configure:1372: checking whether a default linker was specified" >&5
 if test x"${DEFAULT_LINKER+set}" = x"set"; then
     if test x"$gnu_ld_flag" = x"no"; then
        echo "$ac_t""yes ($DEFAULT_LINKER)" 1>&6
@@ -1374,7 +1385,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1378: checking for $ac_word" >&5
+echo "configure:1389: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AWK'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1406,7 +1417,7 @@ done
 # Extract the first word of "flex", so it can be a program name with args.
 set dummy flex; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1410: checking for $ac_word" >&5
+echo "configure:1421: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1440,7 +1451,7 @@ then
   *) ac_lib=l ;;
   esac
   echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6
-echo "configure:1444: checking for yywrap in -l$ac_lib" >&5
+echo "configure:1455: checking for yywrap in -l$ac_lib" >&5
 ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1448,7 +1459,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-l$ac_lib  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 1452 "configure"
+#line 1463 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -1459,7 +1470,7 @@ int main() {
 yywrap()
 ; return 0; }
 EOF
-if { (eval echo configure:1463: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1474: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -1482,7 +1493,7 @@ fi
 fi
 
 echo $ac_n "checking whether ln works""... $ac_c" 1>&6
-echo "configure:1486: checking whether ln works" >&5
+echo "configure:1497: checking whether ln works" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_LN'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1514,7 +1525,7 @@ else
 fi
 
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:1518: checking whether ln -s works" >&5
+echo "configure:1529: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'gcc_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1546,19 +1557,19 @@ else
 fi
 
 echo $ac_n "checking for volatile""... $ac_c" 1>&6
-echo "configure:1550: checking for volatile" >&5
+echo "configure:1561: checking for volatile" >&5
 if eval "test \"`echo '$''{'gcc_cv_c_volatile'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1555 "configure"
+#line 1566 "configure"
 #include "confdefs.h"
 
 int main() {
 volatile int foo;
 ; return 0; }
 EOF
-if { (eval echo configure:1562: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1573: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_c_volatile=yes
 else
@@ -1581,7 +1592,7 @@ fi
 # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1585: checking for $ac_word" >&5
+echo "configure:1596: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1613,7 +1624,7 @@ do
 # Extract the first word of "$ac_prog", so it can be a program name with args.
 set dummy $ac_prog; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1617: checking for $ac_word" >&5
+echo "configure:1628: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1654,7 +1665,7 @@ test -n "$YACC" || YACC="yacc"
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1658: checking for a BSD compatible install" >&5
+echo "configure:1669: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1705,7 +1716,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1709: checking how to run the C preprocessor" >&5
+echo "configure:1720: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -1720,13 +1731,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 1724 "configure"
+#line 1735 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1730: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1741: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1737,13 +1748,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 1741 "configure"
+#line 1752 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1747: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1758: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1754,13 +1765,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 1758 "configure"
+#line 1769 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1764: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1775: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1785,12 +1796,12 @@ fi
 echo "$ac_t""$CPP" 1>&6
 
 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1789: checking for ANSI C header files" >&5
+echo "configure:1800: checking for ANSI C header files" >&5
 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1794 "configure"
+#line 1805 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <stdarg.h>
@@ -1798,7 +1809,7 @@ else
 #include <float.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1802: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1813: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1815,7 +1826,7 @@ rm -f conftest*
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 1819 "configure"
+#line 1830 "configure"
 #include "confdefs.h"
 #include <string.h>
 EOF
@@ -1833,7 +1844,7 @@ fi
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 1837 "configure"
+#line 1848 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
@@ -1854,7 +1865,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 1858 "configure"
+#line 1869 "configure"
 #include "confdefs.h"
 #include <ctype.h>
 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -1865,7 +1876,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
 exit (0); }
 
 EOF
-if { (eval echo configure:1869: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1880: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -1889,12 +1900,12 @@ EOF
 fi
 
 echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:1893: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:1904: checking whether time.h and sys/time.h may both be included" >&5
 if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1898 "configure"
+#line 1909 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/time.h>
@@ -1903,7 +1914,7 @@ int main() {
 struct tm *tp;
 ; return 0; }
 EOF
-if { (eval echo configure:1907: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1918: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_header_time=yes
 else
@@ -1924,12 +1935,12 @@ EOF
 fi
 
 echo $ac_n "checking whether string.h and strings.h may both be included""... $ac_c" 1>&6
-echo "configure:1928: checking whether string.h and strings.h may both be included" >&5
+echo "configure:1939: checking whether string.h and strings.h may both be included" >&5
 if eval "test \"`echo '$''{'gcc_cv_header_string'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1933 "configure"
+#line 1944 "configure"
 #include "confdefs.h"
 #include <string.h>
 #include <strings.h>
@@ -1937,7 +1948,7 @@ int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:1941: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1952: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_header_string=yes
 else
@@ -1958,12 +1969,12 @@ EOF
 fi
 
 echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:1962: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:1973: checking for sys/wait.h that is POSIX.1 compatible" >&5
 if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1967 "configure"
+#line 1978 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/wait.h>
@@ -1979,7 +1990,7 @@ wait (&s);
 s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
 ; return 0; }
 EOF
-if { (eval echo configure:1983: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1994: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_header_sys_wait_h=yes
 else
@@ -2006,17 +2017,17 @@ for ac_hdr in limits.h stddef.h string.h strings.h stdlib.h time.h \
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2010: checking for $ac_hdr" >&5
+echo "configure:2021: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2015 "configure"
+#line 2026 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2020: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2031: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2046,17 +2057,17 @@ done
 # Check for thread headers.
 ac_safe=`echo "thread.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for thread.h""... $ac_c" 1>&6
-echo "configure:2050: checking for thread.h" >&5
+echo "configure:2061: checking for thread.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2055 "configure"
+#line 2066 "configure"
 #include "confdefs.h"
 #include <thread.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2060: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2071: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2080,17 +2091,17 @@ fi
 
 ac_safe=`echo "pthread.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for pthread.h""... $ac_c" 1>&6
-echo "configure:2084: checking for pthread.h" >&5
+echo "configure:2095: checking for pthread.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2089 "configure"
+#line 2100 "configure"
 #include "confdefs.h"
 #include <pthread.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2094: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2117,7 +2128,7 @@ fi
 # Extract the first word of "gnatbind", so it can be a program name with args.
 set dummy gnatbind; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2121: checking for $ac_word" >&5
+echo "configure:2132: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gnat'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2150,12 +2161,12 @@ fi
 
 
 echo $ac_n "checking for preprocessor stringizing operator""... $ac_c" 1>&6
-echo "configure:2154: checking for preprocessor stringizing operator" >&5
+echo "configure:2165: checking for preprocessor stringizing operator" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stringize'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2159 "configure"
+#line 2170 "configure"
 #include "confdefs.h"
 
 #define x(y) #y
@@ -2188,12 +2199,12 @@ echo "$ac_t""${ac_cv_c_stringize}" 1>&6
 # Use <inttypes.h> only if it exists,
 # doesn't clash with <sys/types.h>, and declares intmax_t.
 echo $ac_n "checking for inttypes.h""... $ac_c" 1>&6
-echo "configure:2192: checking for inttypes.h" >&5
+echo "configure:2203: checking for inttypes.h" >&5
 if eval "test \"`echo '$''{'gcc_cv_header_inttypes_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2197 "configure"
+#line 2208 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <inttypes.h>
@@ -2201,7 +2212,7 @@ int main() {
 intmax_t i = -1;
 ; return 0; }
 EOF
-if { (eval echo configure:2205: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2216: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_header_inttypes_h=yes
 else
@@ -2227,12 +2238,12 @@ for ac_func in strtoul bsearch strerror putenv popen bcopy bzero bcmp \
        fputs_unlocked getrusage valloc
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2231: checking for $ac_func" >&5
+echo "configure:2242: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2236 "configure"
+#line 2247 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2255,7 +2266,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2259: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2270: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2284,12 +2295,12 @@ done
 #AC_CHECK_TYPE(wchar_t, unsigned int)
 
 echo $ac_n "checking for vprintf""... $ac_c" 1>&6
-echo "configure:2288: checking for vprintf" >&5
+echo "configure:2299: checking for vprintf" >&5
 if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2293 "configure"
+#line 2304 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char vprintf(); below.  */
@@ -2312,7 +2323,7 @@ vprintf();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2316: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2327: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_vprintf=yes"
 else
@@ -2336,12 +2347,12 @@ fi
 
 if test "$ac_cv_func_vprintf" != yes; then
 echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
-echo "configure:2340: checking for _doprnt" >&5
+echo "configure:2351: checking for _doprnt" >&5
 if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2345 "configure"
+#line 2356 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char _doprnt(); below.  */
@@ -2364,7 +2375,7 @@ _doprnt();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2368: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2379: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func__doprnt=yes"
 else
@@ -2400,7 +2411,7 @@ fi
 
 
 echo $ac_n "checking whether the printf functions support %p""... $ac_c" 1>&6
-echo "configure:2404: checking whether the printf functions support %p" >&5
+echo "configure:2415: checking whether the printf functions support %p" >&5
 if eval "test \"`echo '$''{'gcc_cv_func_printf_ptr'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2408,7 +2419,7 @@ else
   gcc_cv_func_printf_ptr=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 2412 "configure"
+#line 2423 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 
@@ -2421,7 +2432,7 @@ main()
   exit (p != q);
 }
 EOF
-if { (eval echo configure:2425: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2436: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   gcc_cv_func_printf_ptr=yes
 else
@@ -2454,12 +2465,12 @@ case "${host}" in
   ;;
 esac
 echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:2458: checking for pid_t" >&5
+echo "configure:2469: checking for pid_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2463 "configure"
+#line 2474 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -2488,17 +2499,17 @@ fi
 
 ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:2492: checking for vfork.h" >&5
+echo "configure:2503: checking for vfork.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2497 "configure"
+#line 2508 "configure"
 #include "confdefs.h"
 #include <vfork.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2502: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2513: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2523,18 +2534,18 @@ else
 fi
 
 echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:2527: checking for working vfork" >&5
+echo "configure:2538: checking for working vfork" >&5
 if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test "$cross_compiling" = yes; then
   echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:2533: checking for vfork" >&5
+echo "configure:2544: checking for vfork" >&5
 if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2538 "configure"
+#line 2549 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char vfork(); below.  */
@@ -2557,7 +2568,7 @@ vfork();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2561: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2572: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_vfork=yes"
 else
@@ -2579,7 +2590,7 @@ fi
 ac_cv_func_vfork_works=$ac_cv_func_vfork
 else
   cat > conftest.$ac_ext <<EOF
-#line 2583 "configure"
+#line 2594 "configure"
 #include "confdefs.h"
 /* Thanks to Paul Eggert for this test.  */
 #include <stdio.h>
@@ -2674,7 +2685,7 @@ main() {
   }
 }
 EOF
-if { (eval echo configure:2678: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2689: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_vfork_works=yes
 else
@@ -2700,17 +2711,17 @@ for ac_hdr in unistd.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2704: checking for $ac_hdr" >&5
+echo "configure:2715: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2709 "configure"
+#line 2720 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2714: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2725: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2739,12 +2750,12 @@ done
 for ac_func in getpagesize
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2743: checking for $ac_func" >&5
+echo "configure:2754: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2748 "configure"
+#line 2759 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2767,7 +2778,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2771: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2782: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2792,7 +2803,7 @@ fi
 done
 
 echo $ac_n "checking for working mmap from /dev/zero""... $ac_c" 1>&6
-echo "configure:2796: checking for working mmap from /dev/zero" >&5
+echo "configure:2807: checking for working mmap from /dev/zero" >&5
 if eval "test \"`echo '$''{'ac_cv_func_mmap_anywhere'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2800,7 +2811,7 @@ else
   ac_cv_func_mmap_anywhere=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 2804 "configure"
+#line 2815 "configure"
 #include "confdefs.h"
 
 /* Test by Richard Henderson and Alexandre Oliva.
@@ -2872,7 +2883,7 @@ int main()
   exit(0);
 }
 EOF
-if { (eval echo configure:2876: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2887: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_anywhere=yes
 else
@@ -2900,12 +2911,12 @@ for ac_func in bcopy bzero bcmp \
        strsignal putc_unlocked fputs_unlocked strstr environ
 do
 echo $ac_n "checking whether $ac_func must be declared""... $ac_c" 1>&6
-echo "configure:2904: checking whether $ac_func must be declared" >&5
+echo "configure:2915: checking whether $ac_func must be declared" >&5
 if eval "test \"`echo '$''{'gcc_cv_decl_needed_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2909 "configure"
+#line 2920 "configure"
 #include "confdefs.h"
 
 #include <stdio.h>
@@ -2942,7 +2953,7 @@ int main() {
 char *(*pfn) = (char *(*)) $ac_func
 ; return 0; }
 EOF
-if { (eval echo configure:2946: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2957: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   eval "gcc_cv_decl_needed_$ac_func=no"
 else
@@ -2971,12 +2982,12 @@ done
 for ac_func in malloc realloc calloc free
 do
 echo $ac_n "checking whether $ac_func must be declared""... $ac_c" 1>&6
-echo "configure:2975: checking whether $ac_func must be declared" >&5
+echo "configure:2986: checking whether $ac_func must be declared" >&5
 if eval "test \"`echo '$''{'gcc_cv_decl_needed_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2980 "configure"
+#line 2991 "configure"
 #include "confdefs.h"
 
 #include <stdio.h>
@@ -3016,7 +3027,7 @@ int main() {
 char *(*pfn) = (char *(*)) $ac_func
 ; return 0; }
 EOF
-if { (eval echo configure:3020: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3031: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   eval "gcc_cv_decl_needed_$ac_func=no"
 else
@@ -3045,12 +3056,12 @@ done
 for ac_func in getrlimit setrlimit getrusage
 do
 echo $ac_n "checking whether $ac_func must be declared""... $ac_c" 1>&6
-echo "configure:3049: checking whether $ac_func must be declared" >&5
+echo "configure:3060: checking whether $ac_func must be declared" >&5
 if eval "test \"`echo '$''{'gcc_cv_decl_needed_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3054 "configure"
+#line 3065 "configure"
 #include "confdefs.h"
 
 #include <stdio.h>
@@ -3091,7 +3102,7 @@ int main() {
 char *(*pfn) = (char *(*)) $ac_func
 ; return 0; }
 EOF
-if { (eval echo configure:3095: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3106: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   eval "gcc_cv_decl_needed_$ac_func=no"
 else
@@ -3119,12 +3130,12 @@ done
 
 # mkdir takes a single argument on some systems. 
 echo $ac_n "checking if mkdir takes one argument""... $ac_c" 1>&6
-echo "configure:3123: checking if mkdir takes one argument" >&5
+echo "configure:3134: checking if mkdir takes one argument" >&5
 if eval "test \"`echo '$''{'gcc_cv_mkdir_takes_one_arg'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 3128 "configure"
+#line 3139 "configure"
 #include "confdefs.h"
 
 #include <sys/types.h>
@@ -3141,7 +3152,7 @@ int main() {
 mkdir ("foo", 0);
 ; return 0; }
 EOF
-if { (eval echo configure:3145: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3156: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   gcc_cv_mkdir_takes_one_arg=no
 else
@@ -3362,7 +3373,7 @@ for machine in $build $host $target; do
                tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
                target_cpu_default="MASK_GAS"
                tmake_file="t-linux t-linux-gnulibc1 alpha/t-linux alpha/t-crtbe alpha/t-ieee"
-               extra_parts="crtbegin.o crtend.o"
+               extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
                xmake_file=none
                gas=yes gnu_ld=yes
                if test x$enable_threads = xyes; then
@@ -3373,7 +3384,7 @@ for machine in $build $host $target; do
                tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
                target_cpu_default="MASK_GAS"
                tmake_file="t-linux alpha/t-linux alpha/t-crtbe alpha/t-ieee"
-               extra_parts="crtbegin.o crtend.o"
+               extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
                xmake_file=none
                gas=yes gnu_ld=yes
                if test x$enable_threads = xyes; then
@@ -3384,7 +3395,7 @@ for machine in $build $host $target; do
                tm_file="${tm_file} alpha/elf.h alpha/netbsd.h alpha/netbsd-elf.h"
                target_cpu_default="MASK_GAS"
                tmake_file="alpha/t-crtbe alpha/t-ieee"
-               extra_parts="crtbegin.o crtend.o"
+               extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
                xmake_file=none
                gas=yes gnu_ld=yes
                ;;
@@ -6655,7 +6666,7 @@ fi
 
 
         echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
-echo "configure:6659: checking for strerror in -lcposix" >&5
+echo "configure:6670: checking for strerror in -lcposix" >&5
 ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -6663,7 +6674,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lcposix  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 6667 "configure"
+#line 6678 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -6674,7 +6685,7 @@ int main() {
 strerror()
 ; return 0; }
 EOF
-if { (eval echo configure:6678: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6689: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -6697,12 +6708,12 @@ fi
   
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:6701: checking for working const" >&5
+echo "configure:6712: checking for working const" >&5
 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6706 "configure"
+#line 6717 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -6751,7 +6762,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:6755: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6766: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -6772,21 +6783,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:6776: checking for inline" >&5
+echo "configure:6787: checking for inline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 6783 "configure"
+#line 6794 "configure"
 #include "confdefs.h"
 
 int main() {
 } $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:6790: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6801: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -6812,12 +6823,12 @@ EOF
 esac
 
 echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:6816: checking for off_t" >&5
+echo "configure:6827: checking for off_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6821 "configure"
+#line 6832 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -6845,12 +6856,12 @@ EOF
 fi
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:6849: checking for size_t" >&5
+echo "configure:6860: checking for size_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6854 "configure"
+#line 6865 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -6880,19 +6891,19 @@ fi
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:6884: checking for working alloca.h" >&5
+echo "configure:6895: checking for working alloca.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6889 "configure"
+#line 6900 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:6896: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6907: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -6913,12 +6924,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:6917: checking for alloca" >&5
+echo "configure:6928: checking for alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6922 "configure"
+#line 6933 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -6946,7 +6957,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:6950: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6961: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -6978,12 +6989,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:6982: checking whether alloca needs Cray hooks" >&5
+echo "configure:6993: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6987 "configure"
+#line 6998 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -7008,12 +7019,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7012: checking for $ac_func" >&5
+echo "configure:7023: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7017 "configure"
+#line 7028 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -7036,7 +7047,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:7040: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7051: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -7063,7 +7074,7 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:7067: checking stack direction for C alloca" >&5
+echo "configure:7078: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7071,7 +7082,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 7075 "configure"
+#line 7086 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -7090,7 +7101,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:7094: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:7105: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -7115,17 +7126,17 @@ for ac_hdr in unistd.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:7119: checking for $ac_hdr" >&5
+echo "configure:7130: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7124 "configure"
+#line 7135 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7129: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7140: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -7154,12 +7165,12 @@ done
 for ac_func in getpagesize
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7158: checking for $ac_func" >&5
+echo "configure:7169: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7163 "configure"
+#line 7174 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -7182,7 +7193,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:7186: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7197: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -7207,7 +7218,7 @@ fi
 done
 
 echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:7211: checking for working mmap" >&5
+echo "configure:7222: checking for working mmap" >&5
 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7215,7 +7226,7 @@ else
   ac_cv_func_mmap_fixed_mapped=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 7219 "configure"
+#line 7230 "configure"
 #include "confdefs.h"
 
 /* Thanks to Mike Haertel and Jim Avera for this test.
@@ -7355,7 +7366,7 @@ main()
 }
 
 EOF
-if { (eval echo configure:7359: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:7370: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_fixed_mapped=yes
 else
@@ -7383,17 +7394,17 @@ unistd.h sys/param.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:7387: checking for $ac_hdr" >&5
+echo "configure:7398: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7392 "configure"
+#line 7403 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7397: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7408: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -7423,12 +7434,12 @@ done
 strdup __argz_count __argz_stringify __argz_next
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7427: checking for $ac_func" >&5
+echo "configure:7438: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7432 "configure"
+#line 7443 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -7451,7 +7462,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:7455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7466: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -7480,12 +7491,12 @@ done
      for ac_func in stpcpy
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7484: checking for $ac_func" >&5
+echo "configure:7495: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7489 "configure"
+#line 7500 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -7508,7 +7519,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:7512: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7523: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -7542,19 +7553,19 @@ EOF
 
    if test $ac_cv_header_locale_h = yes; then
     echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:7546: checking for LC_MESSAGES" >&5
+echo "configure:7557: checking for LC_MESSAGES" >&5
 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7551 "configure"
+#line 7562 "configure"
 #include "confdefs.h"
 #include <locale.h>
 int main() {
 return LC_MESSAGES
 ; return 0; }
 EOF
-if { (eval echo configure:7558: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7569: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_val_LC_MESSAGES=yes
 else
@@ -7575,7 +7586,7 @@ EOF
     fi
   fi
    echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:7579: checking whether NLS is requested" >&5
+echo "configure:7590: checking whether NLS is requested" >&5
         # Check whether --enable-nls or --disable-nls was given.
 if test "${enable_nls+set}" = set; then
   enableval="$enable_nls"
@@ -7595,7 +7606,7 @@ fi
 EOF
 
       echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:7599: checking whether included gettext is requested" >&5
+echo "configure:7610: checking whether included gettext is requested" >&5
       # Check whether --with-included-gettext or --without-included-gettext was given.
 if test "${with_included_gettext+set}" = set; then
   withval="$with_included_gettext"
@@ -7614,17 +7625,17 @@ fi
 
        ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:7618: checking for libintl.h" >&5
+echo "configure:7629: checking for libintl.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7623 "configure"
+#line 7634 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7628: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7639: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -7641,19 +7652,19 @@ fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:7645: checking for gettext in libc" >&5
+echo "configure:7656: checking for gettext in libc" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7650 "configure"
+#line 7661 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:7657: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7668: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libc=yes
 else
@@ -7669,7 +7680,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
 
           if test "$gt_cv_func_gettext_libc" != "yes"; then
             echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:7673: checking for bindtextdomain in -lintl" >&5
+echo "configure:7684: checking for bindtextdomain in -lintl" >&5
 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -7677,7 +7688,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 7681 "configure"
+#line 7692 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -7688,7 +7699,7 @@ int main() {
 bindtextdomain()
 ; return 0; }
 EOF
-if { (eval echo configure:7692: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7703: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -7704,12 +7715,12 @@ fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:7708: checking for gettext in libintl" >&5
+echo "configure:7719: checking for gettext in libintl" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo $ac_n "checking for gettext in -lintl""... $ac_c" 1>&6
-echo "configure:7713: checking for gettext in -lintl" >&5
+echo "configure:7724: checking for gettext in -lintl" >&5
 ac_lib_var=`echo intl'_'gettext | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -7717,7 +7728,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 7721 "configure"
+#line 7732 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -7728,7 +7739,7 @@ int main() {
 gettext()
 ; return 0; }
 EOF
-if { (eval echo configure:7732: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7743: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -7767,7 +7778,7 @@ EOF
              # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7771: checking for $ac_word" >&5
+echo "configure:7782: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7801,12 +7812,12 @@ fi
                for ac_func in dcgettext
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7805: checking for $ac_func" >&5
+echo "configure:7816: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7810 "configure"
+#line 7821 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -7829,7 +7840,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:7833: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7844: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -7856,7 +7867,7 @@ done
                # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7860: checking for $ac_word" >&5
+echo "configure:7871: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7892,7 +7903,7 @@ fi
                # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7896: checking for $ac_word" >&5
+echo "configure:7907: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7924,7 +7935,7 @@ else
 fi
 
                cat > conftest.$ac_ext <<EOF
-#line 7928 "configure"
+#line 7939 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -7932,7 +7943,7 @@ extern int _nl_msg_cat_cntr;
                               return _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:7936: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7947: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   CATOBJEXT=.gmo
                   DATADIRNAME=share
@@ -7955,7 +7966,7 @@ fi
 
         if test "$CATOBJEXT" = "NONE"; then
          echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6
-echo "configure:7959: checking whether catgets can be used" >&5
+echo "configure:7970: checking whether catgets can be used" >&5
          # Check whether --with-catgets or --without-catgets was given.
 if test "${with_catgets+set}" = set; then
   withval="$with_catgets"
@@ -7968,7 +7979,7 @@ fi
 
          if test "$nls_cv_use_catgets" = "yes"; then
                    echo $ac_n "checking for main in -li""... $ac_c" 1>&6
-echo "configure:7972: checking for main in -li" >&5
+echo "configure:7983: checking for main in -li" >&5
 ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -7976,14 +7987,14 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-li  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 7980 "configure"
+#line 7991 "configure"
 #include "confdefs.h"
 
 int main() {
 main()
 ; return 0; }
 EOF
-if { (eval echo configure:7987: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7998: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -8011,12 +8022,12 @@ else
 fi
 
            echo $ac_n "checking for catgets""... $ac_c" 1>&6
-echo "configure:8015: checking for catgets" >&5
+echo "configure:8026: checking for catgets" >&5
 if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 8020 "configure"
+#line 8031 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char catgets(); below.  */
@@ -8039,7 +8050,7 @@ catgets();
 
 ; return 0; }
 EOF
-if { (eval echo configure:8043: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:8054: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_catgets=yes"
 else
@@ -8061,7 +8072,7 @@ EOF
               # Extract the first word of "gencat", so it can be a program name with args.
 set dummy gencat; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8065: checking for $ac_word" >&5
+echo "configure:8076: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GENCAT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8097,7 +8108,7 @@ fi
                 # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8101: checking for $ac_word" >&5
+echo "configure:8112: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8134,7 +8145,7 @@ fi
                   # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8138: checking for $ac_word" >&5
+echo "configure:8149: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8169,7 +8180,7 @@ fi
                 # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8173: checking for $ac_word" >&5
+echo "configure:8184: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8227,7 +8238,7 @@ fi
         # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8231: checking for $ac_word" >&5
+echo "configure:8242: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8261,7 +8272,7 @@ fi
         # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8265: checking for $ac_word" >&5
+echo "configure:8276: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8297,7 +8308,7 @@ fi
         # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:8301: checking for $ac_word" >&5
+echo "configure:8312: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8390,7 +8401,7 @@ fi
        LINGUAS=
      else
        echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:8394: checking for catalogs to be installed" >&5
+echo "configure:8405: checking for catalogs to be installed" >&5
        NEW_LINGUAS=
        for lang in ${LINGUAS=$ALL_LINGUAS}; do
          case "$ALL_LINGUAS" in
@@ -8418,17 +8429,17 @@ echo "configure:8394: checking for catalogs to be installed" >&5
    if test "$CATOBJEXT" = ".cat"; then
      ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:8422: checking for linux/version.h" >&5
+echo "configure:8433: checking for linux/version.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 8427 "configure"
+#line 8438 "configure"
 #include "confdefs.h"
 #include <linux/version.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:8432: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:8443: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -8503,7 +8514,7 @@ fi
 
 
 echo $ac_n "checking whether windows registry support is requested""... $ac_c" 1>&6
-echo "configure:8507: checking whether windows registry support is requested" >&5
+echo "configure:8518: checking whether windows registry support is requested" >&5
 if test x$enable_win32_registry != xno; then
   cat >> confdefs.h <<\EOF
 #define ENABLE_WIN32_REGISTRY 1
@@ -8532,7 +8543,7 @@ esac
 
 if test x$enable_win32_registry != xno; then
   echo $ac_n "checking registry key on windows hosts""... $ac_c" 1>&6
-echo "configure:8536: checking registry key on windows hosts" >&5
+echo "configure:8547: checking registry key on windows hosts" >&5
   cat >> confdefs.h <<EOF
 #define WIN32_REGISTRY_KEY "$gcc_cv_win32_registry_key"
 EOF
@@ -8708,7 +8719,7 @@ fi
 
 # Figure out what assembler alignment features are present.
 echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:8712: checking assembler alignment features" >&5
+echo "configure:8723: checking assembler alignment features" >&5
 gcc_cv_as=
 gcc_cv_as_alignment_features=
 gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gas
@@ -8829,7 +8840,7 @@ fi
 echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
 
 echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
-echo "configure:8833: checking assembler subsection support" >&5
+echo "configure:8844: checking assembler subsection support" >&5
 gcc_cv_as_subsections=
 if test x$gcc_cv_as != x; then
        # Check if we have .subsection
@@ -8871,7 +8882,7 @@ echo "$ac_t""$gcc_cv_as_subsections" 1>&6
 case "$target" in 
   sparc*-*-*)
     echo $ac_n "checking assembler .register pseudo-op support""... $ac_c" 1>&6
-echo "configure:8875: checking assembler .register pseudo-op support" >&5
+echo "configure:8886: checking assembler .register pseudo-op support" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_register_pseudo_op'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8901,7 +8912,7 @@ EOF
     case "$tm_file" in
     *64*)
        echo $ac_n "checking for 64 bit support in assembler ($gcc_cv_as)""... $ac_c" 1>&6
-echo "configure:8905: checking for 64 bit support in assembler ($gcc_cv_as)" >&5
+echo "configure:8916: checking for 64 bit support in assembler ($gcc_cv_as)" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_flags64'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8946,7 +8957,7 @@ EOF
 
     if test "x$gcc_cv_as_flags64" != xno; then
        echo $ac_n "checking for assembler offsetable %lo() support""... $ac_c" 1>&6
-echo "configure:8950: checking for assembler offsetable %lo() support" >&5
+echo "configure:8961: checking for assembler offsetable %lo() support" >&5
 if eval "test \"`echo '$''{'gcc_cv_as_offsetable_lo10'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -8985,7 +8996,7 @@ EOF
 
   i[34567]86-*-*)
     echo $ac_n "checking assembler instructions""... $ac_c" 1>&6
-echo "configure:8989: checking assembler instructions" >&5
+echo "configure:9000: checking assembler instructions" >&5
     gcc_cv_as_instructions=
     if test x$gcc_cv_as != x; then
        set "filds fists" "filds mem; fists mem"
index 566a322..5b19800 100644 (file)
@@ -620,7 +620,7 @@ changequote([,])dnl
                tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
                target_cpu_default="MASK_GAS"
                tmake_file="t-linux t-linux-gnulibc1 alpha/t-linux alpha/t-crtbe alpha/t-ieee"
-               extra_parts="crtbegin.o crtend.o"
+               extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
                xmake_file=none
                gas=yes gnu_ld=yes
                if test x$enable_threads = xyes; then
@@ -631,7 +631,7 @@ changequote([,])dnl
                tm_file="${tm_file} alpha/elf.h alpha/linux.h alpha/linux-elf.h"
                target_cpu_default="MASK_GAS"
                tmake_file="t-linux alpha/t-linux alpha/t-crtbe alpha/t-ieee"
-               extra_parts="crtbegin.o crtend.o"
+               extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
                xmake_file=none
                gas=yes gnu_ld=yes
                if test x$enable_threads = xyes; then
@@ -642,7 +642,7 @@ changequote([,])dnl
                tm_file="${tm_file} alpha/elf.h alpha/netbsd.h alpha/netbsd-elf.h"
                target_cpu_default="MASK_GAS"
                tmake_file="alpha/t-crtbe alpha/t-ieee"
-               extra_parts="crtbegin.o crtend.o"
+               extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
                xmake_file=none
                gas=yes gnu_ld=yes
                ;;