* configure.in: Remove references to librx.

* Makefile.in: Remove references to librx.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@54804 138bc75d-0d04-0410-961f-82ee72b054a4

diff --git a/ChangeLog b/ChangeLog
index cbb4564..78344e6 100644 (file)
--- a/ChangeLog
+++ b/ChangeLog
@@ -1,3 +1,8 @@
+2002-06-19  Nathanael Nerode  <neroden@twcny.rr.com>
+
+       * configure.in: Remove references to librx.
+       * Makefile.in: Remove references to librx.
+
 Tue Jun 18 22:37:35 2002  Denis Chertykov  <denisc@overta.ru>
 
        * config.sub: Add support for avr target.

diff --git a/Makefile.in b/Makefile.in
index 4a76109..6aa5383 100644 (file)
--- a/Makefile.in
+++ b/Makefile.in
@@ -186,7 +186,7 @@ OTHERS =
 
 # This is set by the configure script to the list of directories which
 # should be built using the target tools.
-TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib librx winsup opcodes bsp libstub cygmon libf2c libobjc
+TARGET_CONFIGDIRS = libiberty libgloss $(SPECIAL_LIBS) newlib winsup opcodes bsp libstub cygmon libf2c libobjc
 
 # Target libraries are put under this directory:
 # Changed by configure to $(target_alias) if cross.
@@ -783,7 +783,6 @@ INSTALL_X11_MODULES = \
 # using $(TARGET_FLAGS_TO_PASS).
 ALL_TARGET_MODULES = \
        all-target-libstdc++-v3 \
-       all-target-librx \
        all-target-newlib \
        all-target-libf2c \
        all-target-libobjc \
@@ -806,7 +805,6 @@ ALL_TARGET_MODULES = \
 # are compiled using the target tools.
 CONFIGURE_TARGET_MODULES = \
        configure-target-libstdc++-v3 \
-       configure-target-librx \
        configure-target-newlib \
        configure-target-libf2c \
        configure-target-libobjc \
@@ -932,7 +930,6 @@ CLEAN_MODULES = \
 # All of the target modules that can be cleaned
 CLEAN_TARGET_MODULES = \
        clean-target-libstdc++-v3 \
-       clean-target-librx \
        clean-target-newlib \
        clean-target-libf2c \
        clean-target-libobjc \
@@ -1747,7 +1744,7 @@ all-target-gperf: configure-target-gperf all-target-libiberty all-target-libstdc
 all-gprof: all-libiberty all-bfd all-opcodes all-intl
 all-grep: all-libiberty
 all-grez: all-libiberty all-bfd all-opcodes
-all-gui: all-gdb all-libproc all-target-librx
+all-gui: all-gdb all-libproc
 all-guile:
 all-gzip: all-libiberty
 all-hello: all-libiberty
@@ -1768,8 +1765,6 @@ configure-target-libffi: $(ALL_GCC_C)
 all-target-libffi: configure-target-libffi
 configure-target-libjava: $(ALL_GCC_C) configure-target-zlib configure-target-boehm-gc configure-target-qthreads configure-target-libffi
 all-target-libjava: configure-target-libjava all-fastjar all-target-zlib all-target-boehm-gc all-target-qthreads all-target-libffi
-configure-target-librx: $(ALL_GCC_C)
-all-target-librx: configure-target-librx
 configure-target-libstdc++-v3: $(ALL_GCC_C)
 all-target-libstdc++-v3: configure-target-libstdc++-v3 all-target-libiberty
 configure-target-libstub: $(ALL_GCC_C)

diff --git a/configure.in b/configure.in
index cf039a8..f606bed 100644 (file)
--- a/configure.in
+++ b/configure.in
@@ -66,7 +66,6 @@ libgcj="target-libffi \
 target_libs="target-libiberty \
                target-libgloss \
                target-newlib \
-               target-librx \
                ${libstdcxx_version} \
                target-libf2c \
                ${libgcj}
@@ -638,7 +637,7 @@ case "${target}" in
     esac
     ;;
   *-*-netware)
-    noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-newlib target-libiberty target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libstdcxx_version} target-newlib target-libiberty target-libgloss ${libgcj}"
     ;;
   *-*-rtems*)
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
@@ -664,8 +663,6 @@ case "${target}" in
   alpha*-*-linux*)
     # newlib is not 64 bit ready
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
-    # linux has rx in libc
-    skipdirs="$skipdirs target-librx"
     ;;
   alpha*-*-freebsd*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
@@ -676,8 +673,6 @@ case "${target}" in
     ;;
   sh-*-linux*)
     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
-    # linux has rx in libc
-    skipdirs="$skipdirs target-librx"
     ;;    
   sh*-*-pe|mips*-*-pe|*arm-wince-pe)
     noconfigdirs="$noconfigdirs ${libgcj}"
@@ -734,7 +729,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-libiberty ${libstdcxx_version} ${libgcj}"
     ;;
   c4x-*-*)
-    noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj}"
     ;;
   c54x*-*-* | tic54x-*-*)
     noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj} gcc gdb newlib"
@@ -743,7 +738,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   d10v-*-*)
-    noconfigdirs="$noconfigdirs target-librx ${libstdcxx_version} target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj}"
     ;;
   d30v-*-*)
     noconfigdirs="$noconfigdirs ${libgcj}"
@@ -764,7 +759,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   h8500-*-*)
-    noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-libgloss ${libgcj} target-libf2c"
+    noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj} target-libf2c"
     ;;
   hppa*64*-*-linux* | parisc*64*-*-linux*)
     # In this case, it's because the hppa64-linux target is for
@@ -804,8 +799,6 @@ case "${target}" in
   s390*-*-linux*)
     # The libffi port is not yet in the GCC tree
     noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
-    # linux has rx in libc
-    skipdirs="$skipdirs target-librx"
     ;;
   i[3456]86-*-linux*)
     # This section makes it possible to build newlib natively on linux.
@@ -818,13 +811,9 @@ case "${target}" in
     # Note however, that newlib will only be configured in this situation
     # if the --with-newlib option has been given, because otherwise
     # 'target-newlib' will appear in skipdirs.
-    # linux has rx in libc
-    skipdirs="$skipdirs target-librx"
     ;;
   *-*-linux*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
-    # linux has rx in libc
-    skipdirs="$skipdirs target-librx"
     ;;
   i[3456]86-*-mingw32*)
     target_configdirs="$target_configdirs target-mingw"
@@ -851,7 +840,7 @@ case "${target}" in
     esac
     ;;    
   i[3456]86-*-pe)
-    noconfigdirs="$noconfigdirs ${libstdcxx_version} target-librx target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj}"
     ;;
   i[3456]86-*-sco3.2v5*)
     # The linker does not yet know about weak symbols in COFF,