* config.gcc: Remove references to install_headers_dir, now unused

	since introduction of config.build.
	* config.gcc (i860-*-sysv4*): Don't set unused USG, SVR3 defines.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@70966 138bc75d-0d04-0410-961f-82ee72b054a4

diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index 422ceb9..a05416d 100644 (file)
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,3 +1,17 @@
+2003-08-31  Nathanael Nerode  <neroden@gcc.gnu.org>
+
+       * config.gcc:  Remove references to install_headers_dir, now unused
+       since introduction of config.build.
+       * config.gcc (i860-*-sysv4*): Don't set unused USG, SVR3 defines.
+
+       * doc/fragments.texi, doc/sourcebuild.texi: Mention new file
+       config.build.
+
+       * config.build: New file.
+       * config.gcc: Remove some build-specific stuff.
+       * configure.in: Use config.build.
+       * configure: Regnerate.
+
 2003-08-31  Steven Bosscher  <steven@gcc.gnu.org>
            Roger Sayle  <roger@eyesopen.com>
 

diff --git a/gcc/config.gcc b/gcc/config.gcc
index 8c9a341..5c26fdd 100644 (file)
--- a/gcc/config.gcc
+++ b/gcc/config.gcc
@@ -166,9 +166,6 @@
 #
 #  host_hook_obj       An object file that provides the host hooks.
 #
-#  install_headers_dir Makefile-target for how the header file directory
-#                      is installed.
-#
 #  exeext              The suffix for executables on this system.
 #
 #  gnu_ld              Set to yes or no depending on whether the target
@@ -193,8 +190,6 @@ xm_defines=
 use_collect2=
 # Set this to override the default target model.
 target_cpu_default=
-# Set this to control how the header file directory is installed.
-install_headers_dir=install-headers-tar
 # Set this if gdb needs a dir command with `dirname $out_file`
 gdb_needs_out_file_path=
 # Set this if the build machine requires executables to have a
@@ -587,9 +582,6 @@ alpha*-dec-osf[45]*)
        extra_headers=va_list.h
        case $machine in
          *-*-osf4*)
-           # Some versions of OSF4 (specifically X4.0-9 296.7) have
-           # a broken tar, so we use cpio instead.
-           install_headers_dir=install-headers-cpio
            # Set target_cpu_default except on 4.0a.
            case $machine in
                *-*-osf4.0a) ;;
@@ -621,7 +613,6 @@ alpha64-dec-*vms*)
                  | sed 's/.*-.*-\(.*\)$/\1/' | sed 's/\./_/g'`
                ;;
        esac
-       install_headers_dir=install-headers-cp
        prefix=/gnu
        local_prefix=/gnu
        ;;
@@ -638,7 +629,6 @@ alpha*-dec-*vms*)
                  | sed 's/.*-.*-\(.*\)$/\1/' | sed 's/\./_/g'`
                ;;
        esac
-       install_headers_dir=install-headers-cp
        prefix=/gnu
        local_prefix=/gnu
        ;;
@@ -832,7 +822,6 @@ hppa1.1-*-hpux10* | hppa2*-*-hpux10*)
                tmake_file="${tmake_file} pa/t-dce-thr"
                ;;
        esac
-       install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
 hppa1.0-*-hpux10*)
@@ -847,7 +836,6 @@ hppa1.0-*-hpux10*)
                tmake_file="${tmake_file} pa/t-dce-thr"
                ;;
        esac
-       install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
 hppa*64*-*-hpux11*)
@@ -875,7 +863,6 @@ hppa*64*-*-hpux11*)
                thread_file=posix 
                ;;
        esac
-       install_headers_dir=install-headers-cpio
        ;;
 hppa1.1-*-hpux11* | hppa2*-*-hpux11*)
        target_cpu_default="MASK_PA_11"
@@ -887,7 +874,6 @@ hppa1.1-*-hpux11* | hppa2*-*-hpux11*)
                thread_file=posix 
                ;;
        esac
-       install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
 hppa1.0-*-hpux11*)
@@ -899,7 +885,6 @@ hppa1.0-*-hpux11*)
                thread_file=posix 
                ;;
        esac
-       install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
 i370-*-opened*)                         # IBM 360/370/390 Architecture
@@ -948,7 +933,6 @@ i[34567]86-sequent-ptx4* | i[34567]86-sequent-sysv4*)
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h ptx4.h i386/ptx4-i.h"
        tmake_file=t-svr4
        extra_parts="crtbegin.o crtend.o"
-       install_headers_dir=install-headers-cpio
        ;;
 i[34567]86-*-aout*)
        tm_file="${tm_file} i386/unix.h i386/bsd.h i386/gas.h i386/gstabs.h i386/i386-aout.h"
@@ -1066,7 +1050,6 @@ i[34567]86-*-rtems*)
        fi
        ;;
 i[34567]86-*-sco3.2v5*)        # 80386 running SCO Open Server 5
-       install_headers_dir=install-headers-cpio
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h i386/sco5.h"
        if test x$gas = xyes
        then
@@ -1125,7 +1108,6 @@ i[34567]86-*-udk*)      # Intel x86 on SCO UW/OSR5 Dev Kit
        tm_file="${tm_file} i386/unix.h i386/att.h dbxelf.h elfos.h svr4.h i386/sysv4.h i386/sysv5.h i386/udk.h"
        tmake_file="i386/t-crtpic i386/t-udk t-svr4"
        extra_parts="crtbegin.o crtend.o"
-       install_headers_dir=install-headers-cpio
        ;;
 i[34567]86-*-sysv*)            # Intel 80386's running system V
        if test x$gas = xyes
@@ -1219,7 +1201,6 @@ i[34567]86-*-kaos*)
        ;;
 i860-*-sysv4*)
         tm_file="${tm_file} elfos.h svr4.h i860/sysv4.h"
-        xm_defines="USG SVR3"
         xmake_file=i860/x-sysv4
         tmake_file="i860/t-i860 i860/t-svr4"
         extra_parts="crtbegin.o crtend.o"
@@ -1323,7 +1304,6 @@ m68000-hp-hpux*)          # HP 9000 series 300
                tm_defines="${tm_defines} DBX_DEBUGGING_INFO=1 USE_GAS"
        fi
        tmake_file=m68k/t-hp320
-       install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
 m68k-hp-hpux7*)        # HP 9000 series 300 running HPUX version 7.
@@ -1334,7 +1314,6 @@ m68k-hp-hpux7*)   # HP 9000 series 300 running HPUX version 7.
        else
                tm_defines="NO_DOT_IN_LABEL NO_BUGS"
        fi
-       install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
 m68k-hp-hpux*) # HP 9000 series 300
@@ -1343,7 +1322,6 @@ m68k-hp-hpux*)    # HP 9000 series 300
        then
                tm_defines="DBX_DEBUGGING_INFO=1 USE_GAS"
        fi
-       install_headers_dir=install-headers-cpio
        use_collect2=yes
        ;;
 m68k-*-aout*)
@@ -2197,12 +2175,6 @@ am33_2.0-*-linux*)
        ;;
 esac
 
-case $machine in
-*-*-sysv*)
-       install_headers_dir=install-headers-cpio
-       ;;
-esac
-
 # Support for --with-cpu and related options (and a few unrelated options,
 # too).  Only do this if $machine is the target, or we'll try to validate
 # the CPU argument against the wrong machine type.