@gccoptlist{-mcpu=@var{cpu-type} @gol
-mtune=@var{cpu-type} @gol
-mcmodel=@var{code-model} @gol
--m32 -m64 @gol
--mapp-regs -mbroken-saverestore -mcypress @gol
--mfaster-structs -mflat @gol
--mfpu -mhard-float -mhard-quad-float @gol
--mimpure-text -mlittle-endian -mlive-g0 -mno-app-regs @gol
--mno-faster-structs -mno-flat -mno-fpu @gol
--mno-impure-text -mno-stack-bias -mno-unaligned-doubles @gol
--msoft-float -msoft-quad-float -msparclite -mstack-bias @gol
--msupersparc -munaligned-doubles -mv8}
+-m32 -m64 -mapp-regs -mno-app-regs @gol
+-mfaster-structs -mno-faster-structs @gol
+-mflat -mno-flat -mfpu -mno-fpu @gol
+-mhard-float -msoft-float @gol
+-mhard-quad-float -msoft-quad-float @gol
+-mimpure-text -mno-impure-text -mlittle-endian @gol
+-mstack-bias -mno-stack-bias @gol
+-munaligned-doubles -mno-unaligned-doubles @gol
+-mv8plus -mno-v8plus -mvis -mno-vis @gol
+-mcypress -mf930 -mf934 @gol
+-msparclite -msupersparc -mv8}
@emph{ARM Options}
@gccoptlist{-mapcs-frame -mno-apcs-frame @gol
@subsection SPARC Options
@cindex SPARC options
-These @samp{-m} switches are supported on the SPARC:
+These @samp{-m} options are supported on the SPARC:
@table @gcctabopt
@item -mno-app-regs
floating point instructions. The functions called are those specified
in the SPARC ABI@. This is the default.
-As of this writing, there are no sparc implementations that have hardware
+As of this writing, there are no SPARC implementations that have hardware
support for the quad-word floating point instructions. They all invoke
a trap handler for one of these instructions, and then the trap handler
emulates the effect of the instruction. Because of the trap handler overhead,
These two options select variations on the SPARC architecture.
By default (unless specifically configured for the Fujitsu SPARClite),
-GCC generates code for the v7 variant of the SPARC architecture.
+GCC generates code for the V7 variant of the SPARC architecture.
-@option{-mv8} will give you SPARC v8 code. The only difference from v7
+@option{-mv8} will give you SPARC-V8 code. The only difference from V7
code is that the compiler emits the integer multiply and integer
-divide instructions which exist in SPARC v8 but not in SPARC v7.
+divide instructions which exist in SPARC-V8 but not in SPARC-V7.
@option{-msparclite} will give you SPARClite code. This adds the integer
multiply, integer divide step and scan (@code{ffs}) instructions which
-exist in SPARClite but not in SPARC v7.
+exist in SPARClite but not in SPARC-V7.
These options are deprecated and will be deleted in a future GCC release.
They have been replaced with @option{-mcpu=xxx}.
@item -mcypress
@itemx -msupersparc
+@itemx -mf930
+@itemx -mf934
@opindex mcypress
@opindex msupersparc
-These two options select the processor for which the code is optimized.
+@opindex -mf930
+@opindex -mf934
+These four options select the processor for which the code is optimized.
With @option{-mcypress} (the default), the compiler optimizes code for the
Cypress CY7C602 chip, as used in the SPARCStation/SPARCServer 3xx series.
With @option{-msupersparc} the compiler optimizes code for the SuperSPARC cpu, as
used in the SPARCStation 10, 1000 and 2000 series. This flag also enables use
-of the full SPARC v8 instruction set.
+of the SPARC-V8 instruction set.
+
+With @option{-mf930} the compiler optimizes code for the Fujitsu MB86930 chip,
+which is the original SPARClite, with no FPU. This flag also enables use
+of the SPARClite instruction set and disables the FPU support.
+
+With @option{-mf934} the compiler optimizes code for the Fujitsu MB86934 chip,
+which is the more recent SPARClite with FPU. This flag also enables use
+of the SPARClite instruction set and enables the FPU support.
These options are deprecated and will be deleted in a future GCC release.
They have been replaced with @option{-mcpu=xxx}.
Set the instruction set, register set, and instruction scheduling parameters
for machine type @var{cpu_type}. Supported values for @var{cpu_type} are
@samp{v7}, @samp{cypress}, @samp{v8}, @samp{supersparc}, @samp{sparclite},
-@samp{hypersparc}, @samp{sparclite86x}, @samp{f930}, @samp{f934},
+@samp{f930}, @samp{f934}, @samp{hypersparc}, @samp{sparclite86x},
@samp{sparclet}, @samp{tsc701}, @samp{v9}, @samp{ultrasparc}, and
@samp{ultrasparc3}.
@samp{sparclite86x}, @samp{tsc701}, @samp{ultrasparc}, and
@samp{ultrasparc3}.
+@item -mv8plus
+@itemx -mno-v8plus
+@opindex -mv8plus
+@opindex -mno-v8plus
+@option{-mv8plus} will give you SPARC-V8+ code. The difference from V8 is
+that the global and out registers are considered 64-bit wide. This is the
+default on Solaris in 32-bit mode for all SPARC-V9 processors.
+
+@item -mvis
+@itemx -mno-vis
+@opindex -mvis
+@opindex -mno-vis
+@option{-mvis} will give you code that takes advantage of the UltraSPARC
+Visual Instruction Set extensions. The default is @option{-mno-vis}.
@end table
-These @samp{-m} switches are supported in addition to the above
-on the SPARCLET processor.
-
-@table @gcctabopt
-@item -mlittle-endian
-@opindex mlittle-endian
-Generate code for a processor running in little-endian mode.
-
-@item -mlive-g0
-@opindex mlive-g0
-Treat register @code{%g0} as a normal register.
-GCC will continue to clobber it as necessary but will not assume
-it always reads as 0.
-
-@item -mbroken-saverestore
-@opindex mbroken-saverestore
-Generate code that does not use non-trivial forms of the @code{save} and
-@code{restore} instructions. Early versions of the SPARCLET processor do
-not correctly handle @code{save} and @code{restore} instructions used with
-arguments. They correctly handle them used without arguments. A @code{save}
-instruction used without arguments increments the current window pointer
-but does not allocate a new stack frame. It is assumed that the window
-overflow trap handler will properly handle this case as will interrupt
-handlers.
-@end table
-
-These @samp{-m} switches are supported in addition to the above
-on SPARC V9 processors in 64-bit environments.
+These @samp{-m} options are supported in addition to the above
+on SPARC-V9 processors in 64-bit environments:
@table @gcctabopt
@item -mlittle-endian
@opindex mno-stack-bias
With @option{-mstack-bias}, GCC assumes that the stack pointer, and
frame pointer if present, are offset by @minus{}2047 which must be added back
-when making stack frame references.
+when making stack frame references. This is the default in 64-bit mode.
Otherwise, assume no such offset is present.
@end table
OSDN Git Service
