--- /dev/null
+/* Target definitions for GNU compiler for Intel 80386 using ELF
+ Copyright (C) 1988, 1991, 1995 Free Software Foundation, Inc.
+
+ Derived from sysv4.h written by Ron Guilmette (rfg@netcom.com).
+
+This file is part of GNU CC.
+
+GNU CC is free software; you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation; either version 2, or (at your option)
+any later version.
+
+GNU CC is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with GNU CC; see the file COPYING. If not, write to
+the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
+
+/* Use stabs instead of DWARF debug format. */
+#define PREFERRED_DEBUGGING_TYPE DBX_DEBUG
+
+#include "i386/i386.h"
+#include "i386/att.h"
+#include "elfos.h"
+
+#undef TARGET_VERSION
+#define TARGET_VERSION fprintf (stderr, " (i386 bare ELF target)");
+
+/* By default, target has a 80387, uses IEEE compatible arithmetic,
+ and returns float values in the 387, ie,
+ (TARGET_80387 | TARGET_IEEE_FP | TARGET_FLOAT_RETURNS_IN_80387) */
+
+#define TARGET_DEFAULT 0301
+
+/* The svr4 ABI for the i386 says that records and unions are returned
+ in memory. */
+
+#undef RETURN_IN_MEMORY
+#define RETURN_IN_MEMORY(TYPE) \
+ (TYPE_MODE (TYPE) == BLKmode)
+
+/* Define which macros to predefine. __svr4__ is our extension. */
+/* This used to define X86, but james@bigtex.cactus.org says that
+ is supposed to be defined optionally by user programs--not by default. */
+#define CPP_PREDEFINES \
+ "-Di386 -Acpu(i386) -Amachine(i386)"
+
+#undef CPP_SPEC
+#define CPP_SPEC "%(cpp_cpu)"
+
+/* This is how to output assembly code to define a `float' constant.
+ We always have to use a .long pseudo-op to do this because the native
+ SVR4 ELF assembler is buggy and it generates incorrect values when we
+ try to use the .float pseudo-op instead. */
+
+#undef ASM_OUTPUT_FLOAT
+#define ASM_OUTPUT_FLOAT(FILE,VALUE) \
+do { long value; \
+ REAL_VALUE_TO_TARGET_SINGLE ((VALUE), value); \
+ if (sizeof (int) == sizeof (long)) \
+ fprintf((FILE), "%s\t0x%x\n", ASM_LONG, value); \
+ else \
+ fprintf((FILE), "%s\t0x%lx\n", ASM_LONG, value); \
+ } while (0)
+
+/* This is how to output assembly code to define a `double' constant.
+ We always have to use a pair of .long pseudo-ops to do this because
+ the native SVR4 ELF assembler is buggy and it generates incorrect
+ values when we try to use the the .double pseudo-op instead. */
+
+#undef ASM_OUTPUT_DOUBLE
+#define ASM_OUTPUT_DOUBLE(FILE,VALUE) \
+do { long value[2]; \
+ REAL_VALUE_TO_TARGET_DOUBLE ((VALUE), value); \
+ if (sizeof (int) == sizeof (long)) \
+ { \
+ fprintf((FILE), "%s\t0x%x\n", ASM_LONG, value[0]); \
+ fprintf((FILE), "%s\t0x%x\n", ASM_LONG, value[1]); \
+ } \
+ else \
+ { \
+ fprintf((FILE), "%s\t0x%lx\n", ASM_LONG, value[0]); \
+ fprintf((FILE), "%s\t0x%lx\n", ASM_LONG, value[1]); \
+ } \
+ } while (0)
+
+
+#undef ASM_OUTPUT_LONG_DOUBLE
+#define ASM_OUTPUT_LONG_DOUBLE(FILE,VALUE) \
+do { long value[3]; \
+ REAL_VALUE_TO_TARGET_LONG_DOUBLE ((VALUE), value); \
+ if (sizeof (int) == sizeof (long)) \
+ { \
+ fprintf((FILE), "%s\t0x%x\n", ASM_LONG, value[0]); \
+ fprintf((FILE), "%s\t0x%x\n", ASM_LONG, value[1]); \
+ fprintf((FILE), "%s\t0x%x\n", ASM_LONG, value[2]); \
+ } \
+ else \
+ { \
+ fprintf((FILE), "%s\t0x%lx\n", ASM_LONG, value[0]); \
+ fprintf((FILE), "%s\t0x%lx\n", ASM_LONG, value[1]); \
+ fprintf((FILE), "%s\t0x%lx\n", ASM_LONG, value[2]); \
+ } \
+ } while (0)
+
+/* Output at beginning of assembler file. */
+/* The .file command should always begin the output. */
+
+#undef ASM_FILE_START
+#define ASM_FILE_START(FILE) \
+ do { \
+ output_file_directive (FILE, main_input_filename); \
+ fprintf (FILE, "\t.version\t\"01.01\"\n"); \
+ } while (0)
+
+/* Define the register numbers to be used in Dwarf debugging information.
+ The SVR4 reference port C compiler uses the following register numbers
+ in its Dwarf output code:
+
+ 0 for %eax (gnu regno = 0)
+ 1 for %ecx (gnu regno = 2)
+ 2 for %edx (gnu regno = 1)
+ 3 for %ebx (gnu regno = 3)
+ 4 for %esp (gnu regno = 7)
+ 5 for %ebp (gnu regno = 6)
+ 6 for %esi (gnu regno = 4)
+ 7 for %edi (gnu regno = 5)
+
+ The following three DWARF register numbers are never generated by
+ the SVR4 C compiler or by the GNU compilers, but SDB on x86/svr4
+ believes these numbers have these meanings.
+
+ 8 for %eip (no gnu equivalent)
+ 9 for %eflags (no gnu equivalent)
+ 10 for %trapno (no gnu equivalent)
+
+ It is not at all clear how we should number the FP stack registers
+ for the x86 architecture. If the version of SDB on x86/svr4 were
+ a bit less brain dead with respect to floating-point then we would
+ have a precedent to follow with respect to DWARF register numbers
+ for x86 FP registers, but the SDB on x86/svr4 is so completely
+ broken with respect to FP registers that it is hardly worth thinking
+ of it as something to strive for compatibility with.
+
+ The verison of x86/svr4 SDB I have at the moment does (partially)
+ seem to believe that DWARF register number 11 is associated with
+ the x86 register %st(0), but that's about all. Higher DWARF
+ register numbers don't seem to be associated with anything in
+ particular, and even for DWARF regno 11, SDB only seems to under-
+ stand that it should say that a variable lives in %st(0) (when
+ asked via an `=' command) if we said it was in DWARF regno 11,
+ but SDB still prints garbage when asked for the value of the
+ variable in question (via a `/' command).
+
+ (Also note that the labels SDB prints for various FP stack regs
+ when doing an `x' command are all wrong.)
+
+ Note that these problems generally don't affect the native SVR4
+ C compiler because it doesn't allow the use of -O with -g and
+ because when it is *not* optimizing, it allocates a memory
+ location for each floating-point variable, and the memory
+ location is what gets described in the DWARF AT_location
+ attribute for the variable in question.
+
+ Regardless of the severe mental illness of the x86/svr4 SDB, we
+ do something sensible here and we use the following DWARF
+ register numbers. Note that these are all stack-top-relative
+ numbers.
+
+ 11 for %st(0) (gnu regno = 8)
+ 12 for %st(1) (gnu regno = 9)
+ 13 for %st(2) (gnu regno = 10)
+ 14 for %st(3) (gnu regno = 11)
+ 15 for %st(4) (gnu regno = 12)
+ 16 for %st(5) (gnu regno = 13)
+ 17 for %st(6) (gnu regno = 14)
+ 18 for %st(7) (gnu regno = 15)
+*/
+
+#undef DBX_REGISTER_NUMBER
+#define DBX_REGISTER_NUMBER(n) \
+((n) == 0 ? 0 \
+ : (n) == 1 ? 2 \
+ : (n) == 2 ? 1 \
+ : (n) == 3 ? 3 \
+ : (n) == 4 ? 6 \
+ : (n) == 5 ? 7 \
+ : (n) == 6 ? 5 \
+ : (n) == 7 ? 4 \
+ : ((n) >= FIRST_STACK_REG && (n) <= LAST_STACK_REG) ? (n)+3 \
+ : (-1))
+
+/* The routine used to output sequences of byte values. We use a special
+ version of this for most svr4 targets because doing so makes the
+ generated assembly code more compact (and thus faster to assemble)
+ as well as more readable. Note that if we find subparts of the
+ character sequence which end with NUL (and which are shorter than
+ STRING_LIMIT) we output those using ASM_OUTPUT_LIMITED_STRING. */
+
+#undef ASM_OUTPUT_ASCII
+#define ASM_OUTPUT_ASCII(FILE, STR, LENGTH) \
+ do \
+ { \
+ register unsigned char *_ascii_bytes = (unsigned char *) (STR); \
+ register unsigned char *limit = _ascii_bytes + (LENGTH); \
+ register unsigned bytes_in_chunk = 0; \
+ for (; _ascii_bytes < limit; _ascii_bytes++) \
+ { \
+ register unsigned char *p; \
+ if (bytes_in_chunk >= 64) \
+ { \
+ fputc ('\n', (FILE)); \
+ bytes_in_chunk = 0; \
+ } \
+ for (p = _ascii_bytes; p < limit && *p != '\0'; p++) \
+ continue; \
+ if (p < limit && (p - _ascii_bytes) <= STRING_LIMIT) \
+ { \
+ if (bytes_in_chunk > 0) \
+ { \
+ fputc ('\n', (FILE)); \
+ bytes_in_chunk = 0; \
+ } \
+ ASM_OUTPUT_LIMITED_STRING ((FILE), _ascii_bytes); \
+ _ascii_bytes = p; \
+ } \
+ else \
+ { \
+ if (bytes_in_chunk == 0) \
+ fprintf ((FILE), "\t.byte\t"); \
+ else \
+ fputc (',', (FILE)); \
+ fprintf ((FILE), "0x%02x", *_ascii_bytes); \
+ bytes_in_chunk += 5; \
+ } \
+ } \
+ if (bytes_in_chunk > 0) \
+ fprintf ((FILE), "\n"); \
+ } \
+ while (0)
+
+/* This is how to output an element of a case-vector that is relative.
+ This is only used for PIC code. See comments by the `casesi' insn in
+ i386.md for an explanation of the expression this outputs. */
+
+#undef ASM_OUTPUT_ADDR_DIFF_ELT
+#define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, BODY, VALUE, REL) \
+ fprintf (FILE, "\t.long _GLOBAL_OFFSET_TABLE_+[.-%s%d]\n", LPREFIX, VALUE)
+
+/* Indicate that jump tables go in the text section. This is
+ necessary when compiling PIC code. */
+
+#define JUMP_TABLES_IN_TEXT_SECTION 1
+
+#define LOCAL_LABEL_PREFIX "."
+
+/* A C statement to output something to the assembler file to switch to section
+ NAME for object DECL which is either a FUNCTION_DECL, a VAR_DECL or
+ NULL_TREE. Some target formats do not support arbitrary sections. Do not
+ define this macro in such cases. */
+
+#undef ASM_OUTPUT_SECTION_NAME
+#define ASM_OUTPUT_SECTION_NAME(FILE, DECL, NAME, RELOC) \
+do { \
+ if ((DECL) && TREE_CODE (DECL) == FUNCTION_DECL) \
+ fprintf (FILE, ".section\t%s,\"ax\"\n", (NAME)); \
+ else if ((DECL) && DECL_READONLY_SECTION (DECL, RELOC)) \
+ fprintf (FILE, ".section\t%s,\"a\"\n", (NAME)); \
+ else \
+ fprintf (FILE, ".section\t%s,\"aw\"\n", (NAME)); \
+} while (0)
+
+/* If defined, a C expression whose value is a string containing the
+ assembler operation to identify the following data as
+ uninitialized global data. If not defined, and neither
+ `ASM_OUTPUT_BSS' nor `ASM_OUTPUT_ALIGNED_BSS' are defined,
+ uninitialized global data will be output in the data section if
+ `-fno-common' is passed, otherwise `ASM_OUTPUT_COMMON' will be
+ used. */
+#undef BSS_SECTION_ASM_OP
+#define BSS_SECTION_ASM_OP ".section\t.bss"
+
+/* Like `ASM_OUTPUT_BSS' except takes the required alignment as a
+ separate, explicit argument. If you define this macro, it is used
+ in place of `ASM_OUTPUT_BSS', and gives you more flexibility in
+ handling the required alignment of the variable. The alignment is
+ specified as the number of bits.
+
+ Try to use function `asm_output_aligned_bss' defined in file
+ `varasm.c' when defining this macro. */
+#undef ASM_OUTPUT_ALIGNED_BSS
+#define ASM_OUTPUT_ALIGNED_BSS(FILE, DECL, NAME, SIZE, ALIGN) \
+ asm_output_aligned_bss (FILE, DECL, NAME, SIZE, ALIGN)
;;
i370-*-mvs*)
;;
+ i[34567]86-*-elf*)
+ xm_file="${xm_file} xm-svr4.h i386/xm-sysv4.h"
+ tm_file=i386/i386elf.h
+ tmake_file=i386/t-i386elf
+ xmake_file=x-svr4
+ ;;
i[34567]86-ibm-aix*) # IBM PS/2 running AIX
if test x$gas = xyes
then
tmake_file=m88k/t-sysv4
;;
mips-sgi-irix6*) # SGI System V.4., IRIX 6
- tm_file=mips/iris6.h
+ if test "x$gnu_ld" = xyes
+ then
+ tm_file="mips/iris6.h mips/iris6gld.h"
+ tmake_file=mips/t-iris6gld
+ else
+ tm_file=mips/iris6.h
+ tmake_file=mips/t-iris6
+ fi
xm_file=mips/xm-iris6.h
xmake_file=mips/x-iris6
- tmake_file=mips/t-iris6
# if test x$enable_threads = xyes; then
# thread_file='irix'
# fi
echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
-echo "configure:6091: checking for strerror in -lcposix" >&5
+echo "configure:6116: checking for strerror in -lcposix" >&5
ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lcposix $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6099 "configure"
+#line 6124 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
strerror()
; return 0; }
EOF
-if { (eval echo configure:6110: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6135: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:6133: checking for working const" >&5
+echo "configure:6158: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6138 "configure"
+#line 6163 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:6187: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6212: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:6208: checking for inline" >&5
+echo "configure:6233: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 6215 "configure"
+#line 6240 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:6222: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6247: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
esac
echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:6248: checking for off_t" >&5
+echo "configure:6273: checking for off_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6253 "configure"
+#line 6278 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
fi
echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:6281: checking for size_t" >&5
+echo "configure:6306: checking for size_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6286 "configure"
+#line 6311 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:6316: checking for working alloca.h" >&5
+echo "configure:6341: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6321 "configure"
+#line 6346 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:6328: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6353: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:6349: checking for alloca" >&5
+echo "configure:6374: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6354 "configure"
+#line 6379 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:6382: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6407: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:6414: checking whether alloca needs Cray hooks" >&5
+echo "configure:6439: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6419 "configure"
+#line 6444 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6444: checking for $ac_func" >&5
+echo "configure:6469: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6449 "configure"
+#line 6474 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6472: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6497: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:6499: checking stack direction for C alloca" >&5
+echo "configure:6524: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 6507 "configure"
+#line 6532 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:6526: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6551: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:6551: checking for $ac_hdr" >&5
+echo "configure:6576: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6556 "configure"
+#line 6581 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6561: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6586: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6590: checking for $ac_func" >&5
+echo "configure:6615: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6595 "configure"
+#line 6620 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6618: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6643: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:6643: checking for working mmap" >&5
+echo "configure:6668: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 6651 "configure"
+#line 6676 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
}
EOF
-if { (eval echo configure:6791: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6816: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:6819: checking for $ac_hdr" >&5
+echo "configure:6844: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6824 "configure"
+#line 6849 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6829: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6854: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
strdup __argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6859: checking for $ac_func" >&5
+echo "configure:6884: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6864 "configure"
+#line 6889 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6887: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6912: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6916: checking for $ac_func" >&5
+echo "configure:6941: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6921 "configure"
+#line 6946 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6944: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6969: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:6978: checking for LC_MESSAGES" >&5
+echo "configure:7003: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6983 "configure"
+#line 7008 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:6990: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7015: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:7011: checking whether NLS is requested" >&5
+echo "configure:7036: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:7031: checking whether included gettext is requested" >&5
+echo "configure:7056: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:7050: checking for libintl.h" >&5
+echo "configure:7075: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7055 "configure"
+#line 7080 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7060: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7085: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:7077: checking for gettext in libc" >&5
+echo "configure:7102: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7082 "configure"
+#line 7107 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:7089: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7114: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:7105: checking for bindtextdomain in -lintl" >&5
+echo "configure:7130: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7113 "configure"
+#line 7138 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:7124: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7149: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:7140: checking for gettext in libintl" >&5
+echo "configure:7165: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for gettext in -lintl""... $ac_c" 1>&6
-echo "configure:7145: checking for gettext in -lintl" >&5
+echo "configure:7170: checking for gettext in -lintl" >&5
ac_lib_var=`echo intl'_'gettext | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7153 "configure"
+#line 7178 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gettext()
; return 0; }
EOF
-if { (eval echo configure:7164: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7189: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7203: checking for $ac_word" >&5
+echo "configure:7228: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7237: checking for $ac_func" >&5
+echo "configure:7262: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7242 "configure"
+#line 7267 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:7265: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7290: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7292: checking for $ac_word" >&5
+echo "configure:7317: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7328: checking for $ac_word" >&5
+echo "configure:7353: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
cat > conftest.$ac_ext <<EOF
-#line 7360 "configure"
+#line 7385 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:7368: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7393: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
if test "$CATOBJEXT" = "NONE"; then
echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6
-echo "configure:7391: checking whether catgets can be used" >&5
+echo "configure:7416: checking whether catgets can be used" >&5
# Check whether --with-catgets or --without-catgets was given.
if test "${with_catgets+set}" = set; then
withval="$with_catgets"
if test "$nls_cv_use_catgets" = "yes"; then
echo $ac_n "checking for main in -li""... $ac_c" 1>&6
-echo "configure:7404: checking for main in -li" >&5
+echo "configure:7429: checking for main in -li" >&5
ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-li $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7412 "configure"
+#line 7437 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:7419: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7444: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for catgets""... $ac_c" 1>&6
-echo "configure:7447: checking for catgets" >&5
+echo "configure:7472: checking for catgets" >&5
if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7452 "configure"
+#line 7477 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char catgets(); below. */
; return 0; }
EOF
-if { (eval echo configure:7475: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7500: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_catgets=yes"
else
# Extract the first word of "gencat", so it can be a program name with args.
set dummy gencat; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7497: checking for $ac_word" >&5
+echo "configure:7522: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GENCAT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7533: checking for $ac_word" >&5
+echo "configure:7558: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7570: checking for $ac_word" >&5
+echo "configure:7595: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7605: checking for $ac_word" >&5
+echo "configure:7630: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7663: checking for $ac_word" >&5
+echo "configure:7688: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7697: checking for $ac_word" >&5
+echo "configure:7722: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7733: checking for $ac_word" >&5
+echo "configure:7758: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:7826: checking for catalogs to be installed" >&5
+echo "configure:7851: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:7854: checking for linux/version.h" >&5
+echo "configure:7879: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7859 "configure"
+#line 7884 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7864: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7889: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
# Figure out what assembler alignment features are present.
echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:8098: checking assembler alignment features" >&5
+echo "configure:8123: checking assembler alignment features" >&5
gcc_cv_as=
gcc_cv_as_alignment_features=
gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gas
echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
-echo "configure:8219: checking assembler subsection support" >&5
+echo "configure:8244: checking assembler subsection support" >&5
gcc_cv_as_subsections=
if test x$gcc_cv_as != x; then
# Check if we have .subsection
echo "$ac_t""$gcc_cv_as_subsections" 1>&6
echo $ac_n "checking assembler instructions""... $ac_c" 1>&6
-echo "configure:8259: checking assembler instructions" >&5
+echo "configure:8284: checking assembler instructions" >&5
gcc_cv_as_instructions=
if test x$gcc_cv_as != x; then
set "filds fists" "filds mem; fists mem"
OSDN Git Service
