conifgure: regenerate

        * config/i386/t-sco5 (crti.o): New target.
        * config/i386/sco5.h (STARTFILE_SPEC): Include crti.o when
        linking -shared.
        * configure.in (i[34567]86-*-sco3.2v5*): Add crti.o.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@25480 138bc75d-0d04-0410-961f-82ee72b054a4

diff --git a/gcc/config/i386/sco5.h b/gcc/config/i386/sco5.h
index 6664ab3..ac4e7e1 100644 (file)
--- a/gcc/config/i386/sco5.h
+++ b/gcc/config/i386/sco5.h
@@ -812,7 +812,8 @@ dtors_section ()                                                    \
 
 #undef STARTFILE_SPEC
 #define STARTFILE_SPEC \
- "%{!shared:\
+ "%{shared: %{!mcoff: crti.o%s}} \
+  %{!shared:\
    %{!symbolic: \
     %{pg:gcrt.o%s}%{!pg:%{p:mcrt1.o%s}%{!p:crt1.o%s}}}} \
   %{ansi:values-Xc.o%s} \

diff --git a/gcc/config/i386/t-sco5 b/gcc/config/i386/t-sco5
index fd3d6c6..f602066 100644 (file)
--- a/gcc/config/i386/t-sco5
+++ b/gcc/config/i386/t-sco5
@@ -14,3 +14,7 @@ MULTILIB_EXTRA_OPTS =
 
 LIBGCC=stmp-multilib
 INSTALL_LIBGCC=install-multilib
+
+crti.o: $(srcdir)/config/i386/sol2-ci.asm $(GCC_PASSES)
+       sed -e '/^!/d' <$(srcdir)/config/i386/sol2-ci.asm >crti.s
+       $(GCC_FOR_TARGET) -c -o crti.o crti.s

diff --git a/gcc/configure b/gcc/configure
index 50bfce1..a436832 100755 (executable)
--- a/gcc/configure
+++ b/gcc/configure
@@ -2160,6 +2160,7 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
+char (*f)();
 
 int main() {
 
@@ -2169,12 +2170,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-$ac_func();
+f = $ac_func;
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:2178: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2179: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2203,12 +2204,12 @@ done
 #AC_CHECK_TYPE(wchar_t, unsigned int)
 
 echo $ac_n "checking for vprintf""... $ac_c" 1>&6
-echo "configure:2207: checking for vprintf" >&5
+echo "configure:2208: checking for vprintf" >&5
 if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2212 "configure"
+#line 2213 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char vprintf(); below.  */
@@ -2217,6 +2218,7 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char vprintf();
+char (*f)();
 
 int main() {
 
@@ -2226,12 +2228,12 @@ int main() {
 #if defined (__stub_vprintf) || defined (__stub___vprintf)
 choke me
 #else
-vprintf();
+f = vprintf;
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:2235: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2237: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_vprintf=yes"
 else
@@ -2255,12 +2257,12 @@ fi
 
 if test "$ac_cv_func_vprintf" != yes; then
 echo $ac_n "checking for _doprnt""... $ac_c" 1>&6
-echo "configure:2259: checking for _doprnt" >&5
+echo "configure:2261: checking for _doprnt" >&5
 if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2264 "configure"
+#line 2266 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char _doprnt(); below.  */
@@ -2269,6 +2271,7 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char _doprnt();
+char (*f)();
 
 int main() {
 
@@ -2278,12 +2281,12 @@ int main() {
 #if defined (__stub__doprnt) || defined (__stub____doprnt)
 choke me
 #else
-_doprnt();
+f = _doprnt;
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:2287: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2290: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func__doprnt=yes"
 else
@@ -2319,7 +2322,7 @@ fi
 
 
 echo $ac_n "checking whether the printf functions support %p""... $ac_c" 1>&6
-echo "configure:2323: checking whether the printf functions support %p" >&5
+echo "configure:2326: checking whether the printf functions support %p" >&5
 if eval "test \"`echo '$''{'gcc_cv_func_printf_ptr'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2327,7 +2330,7 @@ else
   gcc_cv_func_printf_ptr=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 2331 "configure"
+#line 2334 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 
@@ -2340,7 +2343,7 @@ main()
   exit (p != q);
 }
 EOF
-if { (eval echo configure:2344: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2347: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   gcc_cv_func_printf_ptr=yes
 else
@@ -2364,12 +2367,12 @@ EOF
 fi
 
 echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:2368: checking for pid_t" >&5
+echo "configure:2371: checking for pid_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2373 "configure"
+#line 2376 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -2398,17 +2401,17 @@ fi
 
 ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:2402: checking for vfork.h" >&5
+echo "configure:2405: checking for vfork.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2407 "configure"
+#line 2410 "configure"
 #include "confdefs.h"
 #include <vfork.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2412: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2415: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2433,18 +2436,18 @@ else
 fi
 
 echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:2437: checking for working vfork" >&5
+echo "configure:2440: checking for working vfork" >&5
 if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test "$cross_compiling" = yes; then
   echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:2443: checking for vfork" >&5
+echo "configure:2446: checking for vfork" >&5
 if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2448 "configure"
+#line 2451 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char vfork(); below.  */
@@ -2453,6 +2456,7 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char vfork();
+char (*f)();
 
 int main() {
 
@@ -2462,12 +2466,12 @@ int main() {
 #if defined (__stub_vfork) || defined (__stub___vfork)
 choke me
 #else
-vfork();
+f = vfork;
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:2471: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2475: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_vfork=yes"
 else
@@ -2489,7 +2493,7 @@ fi
 ac_cv_func_vfork_works=$ac_cv_func_vfork
 else
   cat > conftest.$ac_ext <<EOF
-#line 2493 "configure"
+#line 2497 "configure"
 #include "confdefs.h"
 /* Thanks to Paul Eggert for this test.  */
 #include <stdio.h>
@@ -2584,7 +2588,7 @@ main() {
   }
 }
 EOF
-if { (eval echo configure:2588: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2592: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_vfork_works=yes
 else
@@ -2612,12 +2616,12 @@ for ac_func in malloc realloc calloc free bcopy bzero bcmp \
        strsignal
 do
 echo $ac_n "checking whether $ac_func must be declared""... $ac_c" 1>&6
-echo "configure:2616: checking whether $ac_func must be declared" >&5
+echo "configure:2620: checking whether $ac_func must be declared" >&5
 if eval "test \"`echo '$''{'gcc_cv_decl_needed_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2621 "configure"
+#line 2625 "configure"
 #include "confdefs.h"
 
 #include <stdio.h>
@@ -2650,7 +2654,7 @@ int main() {
 char *(*pfn) = (char *(*)) $ac_func
 ; return 0; }
 EOF
-if { (eval echo configure:2654: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2658: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   eval "gcc_cv_decl_needed_$ac_func=no"
 else
@@ -2679,12 +2683,12 @@ done
 for ac_func in getrlimit setrlimit
 do
 echo $ac_n "checking whether $ac_func must be declared""... $ac_c" 1>&6
-echo "configure:2683: checking whether $ac_func must be declared" >&5
+echo "configure:2687: checking whether $ac_func must be declared" >&5
 if eval "test \"`echo '$''{'gcc_cv_decl_needed_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2688 "configure"
+#line 2692 "configure"
 #include "confdefs.h"
 
 #include <stdio.h>
@@ -2721,7 +2725,7 @@ int main() {
 char *(*pfn) = (char *(*)) $ac_func
 ; return 0; }
 EOF
-if { (eval echo configure:2725: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2729: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   eval "gcc_cv_decl_needed_$ac_func=no"
 else
@@ -2748,12 +2752,12 @@ done
 
 
 echo $ac_n "checking for sys_siglist declaration in signal.h or unistd.h""... $ac_c" 1>&6
-echo "configure:2752: checking for sys_siglist declaration in signal.h or unistd.h" >&5
+echo "configure:2756: checking for sys_siglist declaration in signal.h or unistd.h" >&5
 if eval "test \"`echo '$''{'ac_cv_decl_sys_siglist'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2757 "configure"
+#line 2761 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <signal.h>
@@ -2765,7 +2769,7 @@ int main() {
 char *msg = *(sys_siglist + 1);
 ; return 0; }
 EOF
-if { (eval echo configure:2769: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2773: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_decl_sys_siglist=yes
 else
@@ -3649,7 +3653,7 @@ for machine in $build $host $target; do
                else
                        tmake_file=i386/t-sco5
                fi
-               extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
+               extra_parts="crti.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
                ;;
        i[34567]86-*-sco3.2v4*)         # 80386 running SCO 3.2v4 system
                xm_file="${xm_file} i386/xm-sco.h"
@@ -5973,7 +5977,7 @@ fi
 
 
         echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6
-echo "configure:5977: checking for strerror in -lcposix" >&5
+echo "configure:5981: checking for strerror in -lcposix" >&5
 ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -5981,7 +5985,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lcposix  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 5985 "configure"
+#line 5989 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -5992,7 +5996,7 @@ int main() {
 strerror()
 ; return 0; }
 EOF
-if { (eval echo configure:5996: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6000: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -6015,12 +6019,12 @@ fi
   
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:6019: checking for working const" >&5
+echo "configure:6023: checking for working const" >&5
 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6024 "configure"
+#line 6028 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -6069,7 +6073,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:6073: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6077: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -6090,21 +6094,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:6094: checking for inline" >&5
+echo "configure:6098: checking for inline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 6101 "configure"
+#line 6105 "configure"
 #include "confdefs.h"
 
 int main() {
 } $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:6108: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6112: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -6130,12 +6134,12 @@ EOF
 esac
 
 echo $ac_n "checking for off_t""... $ac_c" 1>&6
-echo "configure:6134: checking for off_t" >&5
+echo "configure:6138: checking for off_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6139 "configure"
+#line 6143 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -6163,12 +6167,12 @@ EOF
 fi
 
 echo $ac_n "checking for size_t""... $ac_c" 1>&6
-echo "configure:6167: checking for size_t" >&5
+echo "configure:6171: checking for size_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6172 "configure"
+#line 6176 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -6198,19 +6202,19 @@ fi
 # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
 # for constant arguments.  Useless!
 echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:6202: checking for working alloca.h" >&5
+echo "configure:6206: checking for working alloca.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6207 "configure"
+#line 6211 "configure"
 #include "confdefs.h"
 #include <alloca.h>
 int main() {
 char *p = alloca(2 * sizeof(int));
 ; return 0; }
 EOF
-if { (eval echo configure:6214: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6218: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_header_alloca_h=yes
 else
@@ -6231,12 +6235,12 @@ EOF
 fi
 
 echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:6235: checking for alloca" >&5
+echo "configure:6239: checking for alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6240 "configure"
+#line 6244 "configure"
 #include "confdefs.h"
 
 #ifdef __GNUC__
@@ -6264,7 +6268,7 @@ int main() {
 char *p = (char *) alloca(1);
 ; return 0; }
 EOF
-if { (eval echo configure:6268: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6272: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   ac_cv_func_alloca_works=yes
 else
@@ -6296,12 +6300,12 @@ EOF
 
 
 echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:6300: checking whether alloca needs Cray hooks" >&5
+echo "configure:6304: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6305 "configure"
+#line 6309 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -6326,12 +6330,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
 for ac_func in _getb67 GETB67 getb67; do
   echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6330: checking for $ac_func" >&5
+echo "configure:6334: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6335 "configure"
+#line 6339 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -6340,6 +6344,7 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
+char (*f)();
 
 int main() {
 
@@ -6349,12 +6354,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-$ac_func();
+f = $ac_func;
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:6358: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6363: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -6381,7 +6386,7 @@ done
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:6385: checking stack direction for C alloca" >&5
+echo "configure:6390: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6389,7 +6394,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 6393 "configure"
+#line 6398 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -6408,7 +6413,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:6412: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6417: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -6433,17 +6438,17 @@ for ac_hdr in unistd.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:6437: checking for $ac_hdr" >&5
+echo "configure:6442: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6442 "configure"
+#line 6447 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6447: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6452: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -6472,12 +6477,12 @@ done
 for ac_func in getpagesize
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6476: checking for $ac_func" >&5
+echo "configure:6481: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6481 "configure"
+#line 6486 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -6486,6 +6491,7 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
+char (*f)();
 
 int main() {
 
@@ -6495,12 +6501,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-$ac_func();
+f = $ac_func;
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:6504: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6510: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -6525,7 +6531,7 @@ fi
 done
 
 echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:6529: checking for working mmap" >&5
+echo "configure:6535: checking for working mmap" >&5
 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -6533,7 +6539,7 @@ else
   ac_cv_func_mmap_fixed_mapped=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 6537 "configure"
+#line 6543 "configure"
 #include "confdefs.h"
 
 /* Thanks to Mike Haertel and Jim Avera for this test.
@@ -6673,7 +6679,7 @@ main()
 }
 
 EOF
-if { (eval echo configure:6677: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6683: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_fixed_mapped=yes
 else
@@ -6701,17 +6707,17 @@ unistd.h sys/param.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:6705: checking for $ac_hdr" >&5
+echo "configure:6711: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6710 "configure"
+#line 6716 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6715: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6721: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -6741,12 +6747,12 @@ done
 strdup __argz_count __argz_stringify __argz_next
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6745: checking for $ac_func" >&5
+echo "configure:6751: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6750 "configure"
+#line 6756 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -6755,6 +6761,7 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
+char (*f)();
 
 int main() {
 
@@ -6764,12 +6771,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-$ac_func();
+f = $ac_func;
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:6773: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6780: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -6798,12 +6805,12 @@ done
      for ac_func in stpcpy
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6802: checking for $ac_func" >&5
+echo "configure:6809: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6807 "configure"
+#line 6814 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -6812,6 +6819,7 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
+char (*f)();
 
 int main() {
 
@@ -6821,12 +6829,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-$ac_func();
+f = $ac_func;
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:6830: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6838: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -6860,19 +6868,19 @@ EOF
 
    if test $ac_cv_header_locale_h = yes; then
     echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:6864: checking for LC_MESSAGES" >&5
+echo "configure:6872: checking for LC_MESSAGES" >&5
 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6869 "configure"
+#line 6877 "configure"
 #include "confdefs.h"
 #include <locale.h>
 int main() {
 return LC_MESSAGES
 ; return 0; }
 EOF
-if { (eval echo configure:6876: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6884: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   am_cv_val_LC_MESSAGES=yes
 else
@@ -6893,7 +6901,7 @@ EOF
     fi
   fi
    echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:6897: checking whether NLS is requested" >&5
+echo "configure:6905: checking whether NLS is requested" >&5
         # Check whether --enable-nls or --disable-nls was given.
 if test "${enable_nls+set}" = set; then
   enableval="$enable_nls"
@@ -6913,7 +6921,7 @@ fi
 EOF
 
       echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:6917: checking whether included gettext is requested" >&5
+echo "configure:6925: checking whether included gettext is requested" >&5
       # Check whether --with-included-gettext or --without-included-gettext was given.
 if test "${with_included_gettext+set}" = set; then
   withval="$with_included_gettext"
@@ -6932,17 +6940,17 @@ fi
 
        ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:6936: checking for libintl.h" >&5
+echo "configure:6944: checking for libintl.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6941 "configure"
+#line 6949 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6946: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6954: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -6959,19 +6967,19 @@ fi
 if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:6963: checking for gettext in libc" >&5
+echo "configure:6971: checking for gettext in libc" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 6968 "configure"
+#line 6976 "configure"
 #include "confdefs.h"
 #include <libintl.h>
 int main() {
 return (int) gettext ("")
 ; return 0; }
 EOF
-if { (eval echo configure:6975: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6983: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   gt_cv_func_gettext_libc=yes
 else
@@ -6987,7 +6995,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6
 
           if test "$gt_cv_func_gettext_libc" != "yes"; then
             echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:6991: checking for bindtextdomain in -lintl" >&5
+echo "configure:6999: checking for bindtextdomain in -lintl" >&5
 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -6995,7 +7003,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 6999 "configure"
+#line 7007 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -7006,7 +7014,7 @@ int main() {
 bindtextdomain()
 ; return 0; }
 EOF
-if { (eval echo configure:7010: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -7022,12 +7030,12 @@ fi
 if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
   echo "$ac_t""yes" 1>&6
   echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:7026: checking for gettext in libintl" >&5
+echo "configure:7034: checking for gettext in libintl" >&5
 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   echo $ac_n "checking for gettext in -lintl""... $ac_c" 1>&6
-echo "configure:7031: checking for gettext in -lintl" >&5
+echo "configure:7039: checking for gettext in -lintl" >&5
 ac_lib_var=`echo intl'_'gettext | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -7035,7 +7043,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lintl  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 7039 "configure"
+#line 7047 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -7046,7 +7054,7 @@ int main() {
 gettext()
 ; return 0; }
 EOF
-if { (eval echo configure:7050: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7058: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -7085,7 +7093,7 @@ EOF
              # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7089: checking for $ac_word" >&5
+echo "configure:7097: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7119,12 +7127,12 @@ fi
                for ac_func in dcgettext
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:7123: checking for $ac_func" >&5
+echo "configure:7131: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7128 "configure"
+#line 7136 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -7133,6 +7141,7 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char $ac_func();
+char (*f)();
 
 int main() {
 
@@ -7142,12 +7151,12 @@ int main() {
 #if defined (__stub_$ac_func) || defined (__stub___$ac_func)
 choke me
 #else
-$ac_func();
+f = $ac_func;
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:7151: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7160: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -7174,7 +7183,7 @@ done
                # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7178: checking for $ac_word" >&5
+echo "configure:7187: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7210,7 +7219,7 @@ fi
                # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7214: checking for $ac_word" >&5
+echo "configure:7223: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7242,7 +7251,7 @@ else
 fi
 
                cat > conftest.$ac_ext <<EOF
-#line 7246 "configure"
+#line 7255 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -7250,7 +7259,7 @@ extern int _nl_msg_cat_cntr;
                               return _nl_msg_cat_cntr
 ; return 0; }
 EOF
-if { (eval echo configure:7254: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7263: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   CATOBJEXT=.gmo
                   DATADIRNAME=share
@@ -7273,7 +7282,7 @@ fi
 
         if test "$CATOBJEXT" = "NONE"; then
          echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6
-echo "configure:7277: checking whether catgets can be used" >&5
+echo "configure:7286: checking whether catgets can be used" >&5
          # Check whether --with-catgets or --without-catgets was given.
 if test "${with_catgets+set}" = set; then
   withval="$with_catgets"
@@ -7286,7 +7295,7 @@ fi
 
          if test "$nls_cv_use_catgets" = "yes"; then
                    echo $ac_n "checking for main in -li""... $ac_c" 1>&6
-echo "configure:7290: checking for main in -li" >&5
+echo "configure:7299: checking for main in -li" >&5
 ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -7294,14 +7303,14 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-li  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 7298 "configure"
+#line 7307 "configure"
 #include "confdefs.h"
 
 int main() {
 main()
 ; return 0; }
 EOF
-if { (eval echo configure:7305: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7314: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -7329,12 +7338,12 @@ else
 fi
 
            echo $ac_n "checking for catgets""... $ac_c" 1>&6
-echo "configure:7333: checking for catgets" >&5
+echo "configure:7342: checking for catgets" >&5
 if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7338 "configure"
+#line 7347 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char catgets(); below.  */
@@ -7343,6 +7352,7 @@ else
 /* We use char because int might match the return type of a gcc2
     builtin and then its argument prototype would still apply.  */
 char catgets();
+char (*f)();
 
 int main() {
 
@@ -7352,12 +7362,12 @@ int main() {
 #if defined (__stub_catgets) || defined (__stub___catgets)
 choke me
 #else
-catgets();
+f = catgets;
 #endif
 
 ; return 0; }
 EOF
-if { (eval echo configure:7361: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7371: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_catgets=yes"
 else
@@ -7379,7 +7389,7 @@ EOF
               # Extract the first word of "gencat", so it can be a program name with args.
 set dummy gencat; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7383: checking for $ac_word" >&5
+echo "configure:7393: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GENCAT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7415,7 +7425,7 @@ fi
                 # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7419: checking for $ac_word" >&5
+echo "configure:7429: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7452,7 +7462,7 @@ fi
                   # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7456: checking for $ac_word" >&5
+echo "configure:7466: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7487,7 +7497,7 @@ fi
                 # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7491: checking for $ac_word" >&5
+echo "configure:7501: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7545,7 +7555,7 @@ fi
         # Extract the first word of "msgfmt", so it can be a program name with args.
 set dummy msgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7549: checking for $ac_word" >&5
+echo "configure:7559: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7579,7 +7589,7 @@ fi
         # Extract the first word of "gmsgfmt", so it can be a program name with args.
 set dummy gmsgfmt; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7583: checking for $ac_word" >&5
+echo "configure:7593: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7615,7 +7625,7 @@ fi
         # Extract the first word of "xgettext", so it can be a program name with args.
 set dummy xgettext; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:7619: checking for $ac_word" >&5
+echo "configure:7629: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -7708,7 +7718,7 @@ fi
        LINGUAS=
      else
        echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:7712: checking for catalogs to be installed" >&5
+echo "configure:7722: checking for catalogs to be installed" >&5
        NEW_LINGUAS=
        for lang in ${LINGUAS=$ALL_LINGUAS}; do
          case "$ALL_LINGUAS" in
@@ -7736,17 +7746,17 @@ echo "configure:7712: checking for catalogs to be installed" >&5
    if test "$CATOBJEXT" = ".cat"; then
      ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:7740: checking for linux/version.h" >&5
+echo "configure:7750: checking for linux/version.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 7745 "configure"
+#line 7755 "configure"
 #include "confdefs.h"
 #include <linux/version.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:7750: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:7760: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -7978,7 +7988,7 @@ fi
 
 # Figure out what assembler alignment features are present.
 echo $ac_n "checking assembler alignment features""... $ac_c" 1>&6
-echo "configure:7982: checking assembler alignment features" >&5
+echo "configure:7992: checking assembler alignment features" >&5
 gcc_cv_as=
 gcc_cv_as_alignment_features=
 gcc_cv_as_gas_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/gas
@@ -8051,7 +8061,7 @@ fi
 echo "$ac_t""$gcc_cv_as_alignment_features" 1>&6
 
 echo $ac_n "checking assembler subsection support""... $ac_c" 1>&6
-echo "configure:8055: checking assembler subsection support" >&5
+echo "configure:8065: checking assembler subsection support" >&5
 gcc_cv_as_subsections=
 if test x$gcc_cv_as != x; then
        # Check if we have .subsection
@@ -8336,7 +8346,7 @@ fi
 
 # Warn if using init_priority.
 echo $ac_n "checking whether to enable init_priority by default""... $ac_c" 1>&6
-echo "configure:8340: checking whether to enable init_priority by default" >&5
+echo "configure:8350: checking whether to enable init_priority by default" >&5
 if test x$enable_init_priority != xyes; then
   enable_init_priority=no
 fi

diff --git a/gcc/configure.in b/gcc/configure.in
index 3b3c72f..e8d7407 100644 (file)
--- a/gcc/configure.in
+++ b/gcc/configure.in
@@ -1340,7 +1340,7 @@ changequote([,])dnl
                else
                        tmake_file=i386/t-sco5
                fi
-               extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
+               extra_parts="crti.o crtbegin.o crtend.o crtbeginS.o crtendS.o"
                ;;
 changequote(,)dnl
        i[34567]86-*-sco3.2v4*)         # 80386 running SCO 3.2v4 system