+2011-11-07 Richard Henderson <rth@redhat.com>
+
+ * optabs.h (OTI_sync_compare_and_swap, OTI_sync_lock_test_and_set,
+ OTI_sync_old_add, OTI_sync_old_sub, OTI_sync_old_ior,
+ OTI_sync_old_and, OTI_sync_old_xor, OTI_sync_old_nand,
+ OTI_sync_new_add, OTI_sync_new_sub, OTI_sync_new_ior,
+ OTI_sync_new_and, OTI_sync_new_xor, OTI_sync_new_nand): Move and
+ rename from the direct_optab_index enum.
+ (sync_compare_and_swap_optab, sync_lock_test_and_set_optab,
+ sync_old_add_optab, sync_old_sub_optab, sync_old_ior_optab,
+ sync_old_and_optab, sync_old_xor_optab, sync_old_nand_optab,
+ sync_new_add_optab, sync_new_sub_optab, sync_new_ior_optab,
+ sync_new_and_optab, sync_new_xor_optab, sync_new_nand_optab): Read
+ from the optab_table, not the direct_optab_table.
+ (init_sync_libfuncs): Declare.
+ (can_compare_and_swap_p): Update parameters.
+ * optabs.c (init_sync_libfuncs_1, init_sync_libfuncs): New.
+ (can_compare_and_swap_p): Add allow_libcall parameter; if true,
+ test for the legacy compare-and-swap libcall.
+ (expand_atomic_exchange): Use the legacy test-and-set libcall.
+ (expand_atomic_compare_and_swap): Use the legacy CAS libcall.
+ (struct atomic_op_functions): Update for optab type changes.
+ (maybe_emit_op): Likewise.
+ (expand_atomic_fetch_op): Use the legacy fetch-op libcalls.
+ * builtins.c (fold_builtin_atomic_always_lock_free): Update call
+ to can_compare_and_swap_p.
+ * omp-low.c (expand_omp_atomic_fetch_op): Likewise.
+ (expand_omp_atomic_pipeline): Likewise.
+ * genopinit.c (optabs): Make sync_old_*_optab, sync_new_*_optab,
+ sync_compare_and_swap_optab, sync_lock_test_and_set_optab regular
+ optabs.
+ * doc/md.texi (sync_compare_and_swap): Update docs for libcalls.
+
2011-11-07 Jakub Jelinek <jakub@redhat.com>
* config/i386/i386-bultin-types.def (V8SI_FTYPE_V4DF_V4DF): Add.
/* Check if a compare_and_swap pattern exists for the mode which represents
the required size. The pattern is not allowed to fail, so the existence
of the pattern indicates support is present. */
- if (can_compare_and_swap_p (mode))
+ if (can_compare_and_swap_p (mode, true))
return integer_one_node;
else
return integer_zero_node;
to the @code{cbranchcc4} or @code{cstorecc4} pattern as the first
operand of the comparison (the second will be @code{(const_int 0)}).
+For targets where the operating system may provide support for this
+operation via library calls, the @code{sync_compare_and_swap_optab}
+may be initialized to a function with the same interface as the
+@code{__sync_val_compare_and_swap_@var{n}} built-in. If the entire
+set of @var{__sync} builtins are supported via library calls, the
+target can initialize all of the optabs at once with
+@code{init_sync_libfuncs}.
+For the purposes of C++11 @code{std::atomic::is_lock_free}, it is
+assumed that these library calls do @emph{not} use any kind of
+interruptable locking.
+
@cindex @code{sync_add@var{mode}} instruction pattern
@cindex @code{sync_sub@var{mode}} instruction pattern
@cindex @code{sync_ior@var{mode}} instruction pattern
"set_direct_optab_handler (sync_and_optab, $A, CODE_FOR_$(sync_and$I$a$))",
"set_direct_optab_handler (sync_xor_optab, $A, CODE_FOR_$(sync_xor$I$a$))",
"set_direct_optab_handler (sync_nand_optab, $A, CODE_FOR_$(sync_nand$I$a$))",
- "set_direct_optab_handler (sync_old_add_optab, $A, CODE_FOR_$(sync_old_add$I$a$))",
- "set_direct_optab_handler (sync_old_sub_optab, $A, CODE_FOR_$(sync_old_sub$I$a$))",
- "set_direct_optab_handler (sync_old_ior_optab, $A, CODE_FOR_$(sync_old_ior$I$a$))",
- "set_direct_optab_handler (sync_old_and_optab, $A, CODE_FOR_$(sync_old_and$I$a$))",
- "set_direct_optab_handler (sync_old_xor_optab, $A, CODE_FOR_$(sync_old_xor$I$a$))",
- "set_direct_optab_handler (sync_old_nand_optab, $A, CODE_FOR_$(sync_old_nand$I$a$))",
- "set_direct_optab_handler (sync_new_add_optab, $A, CODE_FOR_$(sync_new_add$I$a$))",
- "set_direct_optab_handler (sync_new_sub_optab, $A, CODE_FOR_$(sync_new_sub$I$a$))",
- "set_direct_optab_handler (sync_new_ior_optab, $A, CODE_FOR_$(sync_new_ior$I$a$))",
- "set_direct_optab_handler (sync_new_and_optab, $A, CODE_FOR_$(sync_new_and$I$a$))",
- "set_direct_optab_handler (sync_new_xor_optab, $A, CODE_FOR_$(sync_new_xor$I$a$))",
- "set_direct_optab_handler (sync_new_nand_optab, $A, CODE_FOR_$(sync_new_nand$I$a$))",
- "set_direct_optab_handler (sync_compare_and_swap_optab, $A, CODE_FOR_$(sync_compare_and_swap$I$a$))",
- "set_direct_optab_handler (sync_lock_test_and_set_optab, $A, CODE_FOR_$(sync_lock_test_and_set$I$a$))",
+ "set_optab_handler (sync_old_add_optab, $A, CODE_FOR_$(sync_old_add$I$a$))",
+ "set_optab_handler (sync_old_sub_optab, $A, CODE_FOR_$(sync_old_sub$I$a$))",
+ "set_optab_handler (sync_old_ior_optab, $A, CODE_FOR_$(sync_old_ior$I$a$))",
+ "set_optab_handler (sync_old_and_optab, $A, CODE_FOR_$(sync_old_and$I$a$))",
+ "set_optab_handler (sync_old_xor_optab, $A, CODE_FOR_$(sync_old_xor$I$a$))",
+ "set_optab_handler (sync_old_nand_optab, $A, CODE_FOR_$(sync_old_nand$I$a$))",
+ "set_optab_handler (sync_new_add_optab, $A, CODE_FOR_$(sync_new_add$I$a$))",
+ "set_optab_handler (sync_new_sub_optab, $A, CODE_FOR_$(sync_new_sub$I$a$))",
+ "set_optab_handler (sync_new_ior_optab, $A, CODE_FOR_$(sync_new_ior$I$a$))",
+ "set_optab_handler (sync_new_and_optab, $A, CODE_FOR_$(sync_new_and$I$a$))",
+ "set_optab_handler (sync_new_xor_optab, $A, CODE_FOR_$(sync_new_xor$I$a$))",
+ "set_optab_handler (sync_new_nand_optab, $A, CODE_FOR_$(sync_new_nand$I$a$))",
+ "set_optab_handler (sync_compare_and_swap_optab, $A, CODE_FOR_$(sync_compare_and_swap$I$a$))",
+ "set_optab_handler (sync_lock_test_and_set_optab, $A, CODE_FOR_$(sync_lock_test_and_set$I$a$))",
"set_direct_optab_handler (sync_lock_release_optab, $A, CODE_FOR_$(sync_lock_release$I$a$))",
"set_direct_optab_handler (atomic_exchange_optab, $A, CODE_FOR_$(atomic_exchange$I$a$))",
"set_direct_optab_handler (atomic_compare_and_swap_optab, $A, CODE_FOR_$(atomic_compare_and_swap$I$a$))",
+2011-11-07 Richard Henderson <rth@redhat.com>
+
+ * builtins.c (compareAndSwapInt_builtin): Use can_compare_and_swap_p.
+ (compareAndSwapLong_builtin): Likewise.
+ (compareAndSwapObject_builtin): Likewise.
+ (VMSupportsCS8_builtin): Likewise.
+
2011-11-02 Rainer Orth <ro@CeBiTec.Uni-Bielefeld.DE>
* Make-lang.in (jvspec.o): Pass SHLIB instead of SHLIB_LINK.
tree orig_call)
{
enum machine_mode mode = TYPE_MODE (int_type_node);
- if (direct_optab_handler (sync_compare_and_swap_optab, mode)
- != CODE_FOR_nothing
- || flag_use_atomic_builtins)
+ if (can_compare_and_swap_p (mode, flag_use_atomic_builtins))
{
tree addr, stmt;
enum built_in_function fncode = BUILT_IN_SYNC_BOOL_COMPARE_AND_SWAP_4;
tree orig_call)
{
enum machine_mode mode = TYPE_MODE (long_type_node);
- if (direct_optab_handler (sync_compare_and_swap_optab, mode)
- != CODE_FOR_nothing
- || (GET_MODE_SIZE (mode) <= GET_MODE_SIZE (word_mode)
- && flag_use_atomic_builtins))
- /* We don't trust flag_use_atomic_builtins for multi-word
- compareAndSwap. Some machines such as ARM have atomic libfuncs
- but not the multi-word versions. */
+ /* We don't trust flag_use_atomic_builtins for multi-word compareAndSwap.
+ Some machines such as ARM have atomic libfuncs but not the multi-word
+ versions. */
+ if (can_compare_and_swap_p (mode,
+ (flag_use_atomic_builtins
+ && GET_MODE_SIZE (mode) <= UNITS_PER_WORD)))
{
tree addr, stmt;
enum built_in_function fncode = BUILT_IN_SYNC_BOOL_COMPARE_AND_SWAP_8;
tree orig_call)
{
enum machine_mode mode = TYPE_MODE (ptr_type_node);
- if (direct_optab_handler (sync_compare_and_swap_optab, mode)
- != CODE_FOR_nothing
- || flag_use_atomic_builtins)
+ if (can_compare_and_swap_p (mode, flag_use_atomic_builtins))
{
tree addr, stmt;
enum built_in_function builtin;
{
enum machine_mode mode = TYPE_MODE (long_type_node);
gcc_assert (method_return_type == boolean_type_node);
- if (direct_optab_handler (sync_compare_and_swap_optab, mode)
- != CODE_FOR_nothing)
+ if (can_compare_and_swap_p (mode, false))
return boolean_true_node;
else
return boolean_false_node;
matter is that (with the exception of i486 vs i586 and xadd) all targets
that support any atomic operaton optab also implements compare-and-swap.
Let optabs.c take care of expanding any compare-and-swap loop. */
- if (!can_compare_and_swap_p (imode))
+ if (!can_compare_and_swap_p (imode, true))
return false;
gsi = gsi_last_bb (load_bb);
type = TYPE_MAIN_VARIANT (TREE_TYPE (TREE_TYPE (addr)));
itype = TREE_TYPE (TREE_TYPE (cmpxchg));
- if (!can_compare_and_swap_p (TYPE_MODE (itype)))
+ if (!can_compare_and_swap_p (TYPE_MODE (itype), true))
return false;
/* Load the initial value, replacing the GIMPLE_OMP_ATOMIC_LOAD. */
targetm.init_libfuncs ();
}
+/* A helper function for init_sync_libfuncs. Using the basename BASE,
+ install libfuncs into TAB for BASE_N for 1 <= N <= MAX. */
+
+static void
+init_sync_libfuncs_1 (optab tab, const char *base, int max)
+{
+ enum machine_mode mode;
+ char buf[64];
+ size_t len = strlen (base);
+ int i;
+
+ gcc_assert (max <= 8);
+ gcc_assert (len + 3 < sizeof (buf));
+
+ memcpy (buf, base, len);
+ buf[len] = '_';
+ buf[len + 1] = '0';
+ buf[len + 2] = '\0';
+
+ mode = QImode;
+ for (i = 1; i < max; i *= 2)
+ {
+ buf[len + 1] = '0' + i;
+ set_optab_libfunc (tab, mode, buf);
+ mode = GET_MODE_2XWIDER_MODE (mode);
+ }
+}
+
+void
+init_sync_libfuncs (int max)
+{
+ init_sync_libfuncs_1 (sync_compare_and_swap_optab,
+ "__sync_val_compare_and_swap", max);
+ init_sync_libfuncs_1 (sync_lock_test_and_set_optab,
+ "__sync_lock_test_and_set", max);
+
+ init_sync_libfuncs_1 (sync_old_add_optab, "__sync_fetch_and_add", max);
+ init_sync_libfuncs_1 (sync_old_sub_optab, "__sync_fetch_and_sub", max);
+ init_sync_libfuncs_1 (sync_old_ior_optab, "__sync_fetch_and_ior", max);
+ init_sync_libfuncs_1 (sync_old_and_optab, "__sync_fetch_and_and", max);
+ init_sync_libfuncs_1 (sync_old_xor_optab, "__sync_fetch_and_xor", max);
+ init_sync_libfuncs_1 (sync_old_nand_optab, "__sync_fetch_and_nand", max);
+
+ init_sync_libfuncs_1 (sync_new_add_optab, "__sync_add_and_fetch", max);
+ init_sync_libfuncs_1 (sync_new_sub_optab, "__sync_sub_and_fetch", max);
+ init_sync_libfuncs_1 (sync_new_ior_optab, "__sync_ior_and_fetch", max);
+ init_sync_libfuncs_1 (sync_new_and_optab, "__sync_and_and_fetch", max);
+ init_sync_libfuncs_1 (sync_new_xor_optab, "__sync_xor_and_fetch", max);
+ init_sync_libfuncs_1 (sync_new_nand_optab, "__sync_nand_and_fetch", max);
+}
+
/* Print information about the current contents of the optabs on
STDERR. */
/* Return true if there is a compare_and_swap pattern. */
bool
-can_compare_and_swap_p (enum machine_mode mode)
+can_compare_and_swap_p (enum machine_mode mode, bool allow_libcall)
{
enum insn_code icode;
- /* Check for __sync_compare_and_swap. */
- icode = direct_optab_handler (sync_compare_and_swap_optab, mode);
- if (icode != CODE_FOR_nothing)
- return true;
-
/* Check for __atomic_compare_and_swap. */
icode = direct_optab_handler (atomic_compare_and_swap_optab, mode);
if (icode != CODE_FOR_nothing)
- return true;
+ return true;
+
+ /* Check for __sync_compare_and_swap. */
+ icode = optab_handler (sync_compare_and_swap_optab, mode);
+ if (icode != CODE_FOR_nothing)
+ return true;
+ if (allow_libcall && optab_libfunc (sync_compare_and_swap_optab, mode))
+ return true;
/* No inline compare and swap. */
return false;
{
enum machine_mode mode = GET_MODE (mem);
enum insn_code icode;
- rtx last_insn;
/* If the target supports the exchange directly, great. */
icode = direct_optab_handler (atomic_exchange_optab, mode);
if (use_test_and_set)
{
- icode = direct_optab_handler (sync_lock_test_and_set_optab, mode);
- last_insn = get_last_insn ();
- if ((icode != CODE_FOR_nothing) && (model == MEMMODEL_SEQ_CST ||
- model == MEMMODEL_RELEASE ||
- model == MEMMODEL_ACQ_REL))
- expand_builtin_mem_thread_fence (model);
+ icode = optab_handler (sync_lock_test_and_set_optab, mode);
if (icode != CODE_FOR_nothing)
{
struct expand_operand ops[3];
+ rtx last_insn = get_last_insn ();
+
+ if (model == MEMMODEL_SEQ_CST
+ || model == MEMMODEL_RELEASE
+ || model == MEMMODEL_ACQ_REL)
+ expand_builtin_mem_thread_fence (model);
create_output_operand (&ops[0], target, mode);
create_fixed_operand (&ops[1], mem);
create_convert_operand_to (&ops[2], val, mode, true);
if (maybe_expand_insn (icode, 3, ops))
return ops[0].value;
+
+ delete_insns_since (last_insn);
}
- /* Remove any fence that was inserted since a compare and swap loop is
- already a full memory barrier. */
- if (last_insn != get_last_insn ())
- delete_insns_since (last_insn);
+ /* If an external test-and-set libcall is provided, use that instead of
+ any external compare-and-swap that we might get from the compare-and-
+ swap-loop expansion below. */
+ if (!can_compare_and_swap_p (mode, false))
+ {
+ rtx libfunc = optab_libfunc (sync_lock_test_and_set_optab, mode);
+ if (libfunc != NULL)
+ {
+ rtx addr;
+
+ if (model == MEMMODEL_SEQ_CST
+ || model == MEMMODEL_RELEASE
+ || model == MEMMODEL_ACQ_REL)
+ expand_builtin_mem_thread_fence (model);
+
+ addr = convert_memory_address (ptr_mode, XEXP (mem, 0));
+ return emit_library_call_value (libfunc, target, LCT_NORMAL,
+ mode, 2, addr, ptr_mode,
+ val, mode);
+ }
+ }
}
/* Otherwise, use a compare-and-swap loop for the exchange. */
- if (can_compare_and_swap_p (mode))
+ if (can_compare_and_swap_p (mode, true))
{
if (!target || !register_operand (target, mode))
target = gen_reg_rtx (mode);
enum machine_mode mode = GET_MODE (mem);
struct expand_operand ops[8];
enum insn_code icode;
- rtx target_bool, target_oval;
+ rtx target_oval, target_bool = NULL_RTX;
+ rtx libfunc;
/* Load expected into a register for the compare and swap. */
if (MEM_P (expected))
/* Otherwise fall back to the original __sync_val_compare_and_swap
which is always seq-cst. */
- icode = direct_optab_handler (sync_compare_and_swap_optab, mode);
+ icode = optab_handler (sync_compare_and_swap_optab, mode);
if (icode != CODE_FOR_nothing)
{
rtx cc_reg;
return false;
target_oval = ops[0].value;
- target_bool = NULL_RTX;
/* If the caller isn't interested in the boolean return value,
skip the computation of it. */
cc_reg = NULL_RTX;
if (have_insn_for (COMPARE, CCmode))
note_stores (PATTERN (get_last_insn ()), find_cc_set, &cc_reg);
+ if (cc_reg)
+ {
+ target_bool = emit_store_flag_force (target_bool, EQ, cc_reg,
+ const0_rtx, VOIDmode, 0, 1);
+ goto success;
+ }
+ goto success_bool_from_val;
+ }
- target_bool
- = (cc_reg
- ? emit_store_flag_force (target_bool, EQ, cc_reg,
- const0_rtx, VOIDmode, 0, 1)
- : emit_store_flag_force (target_bool, EQ, target_oval,
- expected, VOIDmode, 1, 1));
- goto success;
+ /* Also check for library support for __sync_val_compare_and_swap. */
+ libfunc = optab_libfunc (sync_compare_and_swap_optab, mode);
+ if (libfunc != NULL)
+ {
+ rtx addr = convert_memory_address (ptr_mode, XEXP (mem, 0));
+ target_oval = emit_library_call_value (libfunc, target_oval, LCT_NORMAL,
+ mode, 3, addr, ptr_mode,
+ expected, mode, desired, mode);
+
+ /* Compute the boolean return value only if requested. */
+ if (ptarget_bool)
+ goto success_bool_from_val;
+ else
+ goto success;
}
+
+ /* Failure. */
return false;
+ success_bool_from_val:
+ target_bool = emit_store_flag_force (target_bool, EQ, target_oval,
+ expected, VOIDmode, 1, 1);
success:
/* Make sure that the oval output winds up where the caller asked. */
if (ptarget_oval)
struct atomic_op_functions
{
- struct direct_optab_d *mem_fetch_before;
- struct direct_optab_d *mem_fetch_after;
- struct direct_optab_d *mem_no_result;
- struct direct_optab_d *fetch_before;
- struct direct_optab_d *fetch_after;
- struct direct_optab_d *no_result;
+ direct_optab mem_fetch_before;
+ direct_optab mem_fetch_after;
+ direct_optab mem_no_result;
+ optab fetch_before;
+ optab fetch_after;
+ direct_optab no_result;
enum rtx_code reverse_code;
};
rtx val, bool use_memmodel, enum memmodel model, bool after)
{
enum machine_mode mode = GET_MODE (mem);
- struct direct_optab_d *this_optab;
struct expand_operand ops[4];
enum insn_code icode;
int op_counter = 0;
{
if (use_memmodel)
{
- this_optab = optab->mem_no_result;
+ icode = direct_optab_handler (optab->mem_no_result, mode);
create_integer_operand (&ops[2], model);
num_ops = 3;
}
else
{
- this_optab = optab->no_result;
+ icode = direct_optab_handler (optab->no_result, mode);
num_ops = 2;
}
}
{
if (use_memmodel)
{
- this_optab = after ? optab->mem_fetch_after : optab->mem_fetch_before;
+ icode = direct_optab_handler (after ? optab->mem_fetch_after
+ : optab->mem_fetch_before, mode);
create_integer_operand (&ops[3], model);
- num_ops= 4;
+ num_ops = 4;
}
else
{
- this_optab = after ? optab->fetch_after : optab->fetch_before;
+ icode = optab_handler (after ? optab->fetch_after
+ : optab->fetch_before, mode);
num_ops = 3;
}
create_output_operand (&ops[op_counter++], target, mode);
}
-
- icode = direct_optab_handler (this_optab, mode);
if (icode == CODE_FOR_nothing)
return NULL_RTX;
create_convert_operand_to (&ops[op_counter++], val, mode, true);
if (maybe_expand_insn (icode, num_ops, ops))
- return ((target == const0_rtx) ? const0_rtx : ops[0].value);
+ return (target == const0_rtx ? const0_rtx : ops[0].value);
return NULL_RTX;
}
/* If the fetch value can be calculated from the other variation of fetch,
try that operation. */
- if (after || optab.reverse_code != UNKNOWN || target == const0_rtx)
+ if (after || unused_result || optab.reverse_code != UNKNOWN)
{
/* Try the __atomic version, then the older __sync version. */
result = maybe_emit_op (&optab, target, mem, val, true, model, !after);
Fetch_before == after REVERSE_OP val. */
if (!after)
code = optab.reverse_code;
- result = expand_simple_binop (mode, code, result, val, NULL_RTX, true,
+ result = expand_simple_binop (mode, code, result, val, target, true,
OPTAB_LIB_WIDEN);
return result;
}
}
+ /* Try the __sync libcalls only if we can't do compare-and-swap inline. */
+ if (!can_compare_and_swap_p (mode, false))
+ {
+ rtx libfunc;
+ bool fixup = false;
+
+ libfunc = optab_libfunc (after ? optab.fetch_after
+ : optab.fetch_before, mode);
+ if (libfunc == NULL
+ && (after || unused_result || optab.reverse_code != UNKNOWN))
+ {
+ fixup = true;
+ if (!after)
+ code = optab.reverse_code;
+ libfunc = optab_libfunc (after ? optab.fetch_before
+ : optab.fetch_after, mode);
+ }
+ if (libfunc != NULL)
+ {
+ rtx addr = convert_memory_address (ptr_mode, XEXP (mem, 0));
+ result = emit_library_call_value (libfunc, NULL, LCT_NORMAL, mode,
+ 2, addr, ptr_mode, val, mode);
+
+ if (unused_result)
+ return target;
+ if (fixup)
+ result = expand_simple_binop (mode, code, result, val, target,
+ true, OPTAB_LIB_WIDEN);
+ return result;
+ }
+ }
+
/* If nothing else has succeeded, default to a compare and swap loop. */
- if (can_compare_and_swap_p (mode))
+ if (can_compare_and_swap_p (mode, true))
{
rtx insn;
rtx t0 = gen_reg_rtx (mode), t1;
/* Perform a raise to the power of integer. */
OTI_powi,
+ /* Atomic compare and swap. */
+ OTI_sync_compare_and_swap,
+
+ /* Atomic exchange with acquire semantics. */
+ OTI_sync_lock_test_and_set,
+
+ /* This second set is atomic operations in which we return the value
+ that existed in memory before the operation. */
+ OTI_sync_old_add,
+ OTI_sync_old_sub,
+ OTI_sync_old_ior,
+ OTI_sync_old_and,
+ OTI_sync_old_xor,
+ OTI_sync_old_nand,
+
+ /* This third set is atomic operations in which we return the value
+ that resulted after performing the operation. */
+ OTI_sync_new_add,
+ OTI_sync_new_sub,
+ OTI_sync_new_ior,
+ OTI_sync_new_and,
+ OTI_sync_new_xor,
+ OTI_sync_new_nand,
+
OTI_MAX
};
#define powi_optab (&optab_table[OTI_powi])
+#define sync_compare_and_swap_optab \
+ (&optab_table[(int) OTI_sync_compare_and_swap])
+#define sync_lock_test_and_set_optab \
+ (&optab_table[(int) OTI_sync_lock_test_and_set])
+#define sync_old_add_optab (&optab_table[(int) OTI_sync_old_add])
+#define sync_old_sub_optab (&optab_table[(int) OTI_sync_old_sub])
+#define sync_old_ior_optab (&optab_table[(int) OTI_sync_old_ior])
+#define sync_old_and_optab (&optab_table[(int) OTI_sync_old_and])
+#define sync_old_xor_optab (&optab_table[(int) OTI_sync_old_xor])
+#define sync_old_nand_optab (&optab_table[(int) OTI_sync_old_nand])
+#define sync_new_add_optab (&optab_table[(int) OTI_sync_new_add])
+#define sync_new_sub_optab (&optab_table[(int) OTI_sync_new_sub])
+#define sync_new_ior_optab (&optab_table[(int) OTI_sync_new_ior])
+#define sync_new_and_optab (&optab_table[(int) OTI_sync_new_and])
+#define sync_new_xor_optab (&optab_table[(int) OTI_sync_new_xor])
+#define sync_new_nand_optab (&optab_table[(int) OTI_sync_new_nand])
+
/* Conversion optabs have their own table and indexes. */
enum convert_optab_index
{
DOI_cmpstrn,
DOI_cmpmem,
- /* Synchronization primitives. This first set is atomic operation for
- which we don't care about the resulting value. */
+ /* Atomic clear with release semantics. */
+ DOI_sync_lock_release,
+
+ /* Atomic operation with no resulting value. */
DOI_sync_add,
DOI_sync_sub,
DOI_sync_ior,
DOI_sync_xor,
DOI_sync_nand,
- /* This second set is atomic operations in which we return the value
- that existed in memory before the operation. */
- DOI_sync_old_add,
- DOI_sync_old_sub,
- DOI_sync_old_ior,
- DOI_sync_old_and,
- DOI_sync_old_xor,
- DOI_sync_old_nand,
-
- /* This third set is atomic operations in which we return the value
- that resulted after performing the operation. */
- DOI_sync_new_add,
- DOI_sync_new_sub,
- DOI_sync_new_ior,
- DOI_sync_new_and,
- DOI_sync_new_xor,
- DOI_sync_new_nand,
-
- /* Atomic compare and swap. */
- DOI_sync_compare_and_swap,
-
- /* Atomic exchange with acquire semantics. */
- DOI_sync_lock_test_and_set,
-
- /* Atomic clear with release semantics. */
- DOI_sync_lock_release,
-
/* Atomic operations with memory model parameters. */
DOI_atomic_exchange,
DOI_atomic_compare_and_swap,
#define cmpstr_optab (&direct_optab_table[(int) DOI_cmpstr])
#define cmpstrn_optab (&direct_optab_table[(int) DOI_cmpstrn])
#define cmpmem_optab (&direct_optab_table[(int) DOI_cmpmem])
+#define sync_lock_release_optab \
+ (&direct_optab_table[(int) DOI_sync_lock_release])
#define sync_add_optab (&direct_optab_table[(int) DOI_sync_add])
#define sync_sub_optab (&direct_optab_table[(int) DOI_sync_sub])
#define sync_ior_optab (&direct_optab_table[(int) DOI_sync_ior])
#define sync_and_optab (&direct_optab_table[(int) DOI_sync_and])
#define sync_xor_optab (&direct_optab_table[(int) DOI_sync_xor])
#define sync_nand_optab (&direct_optab_table[(int) DOI_sync_nand])
-#define sync_old_add_optab (&direct_optab_table[(int) DOI_sync_old_add])
-#define sync_old_sub_optab (&direct_optab_table[(int) DOI_sync_old_sub])
-#define sync_old_ior_optab (&direct_optab_table[(int) DOI_sync_old_ior])
-#define sync_old_and_optab (&direct_optab_table[(int) DOI_sync_old_and])
-#define sync_old_xor_optab (&direct_optab_table[(int) DOI_sync_old_xor])
-#define sync_old_nand_optab (&direct_optab_table[(int) DOI_sync_old_nand])
-#define sync_new_add_optab (&direct_optab_table[(int) DOI_sync_new_add])
-#define sync_new_sub_optab (&direct_optab_table[(int) DOI_sync_new_sub])
-#define sync_new_ior_optab (&direct_optab_table[(int) DOI_sync_new_ior])
-#define sync_new_and_optab (&direct_optab_table[(int) DOI_sync_new_and])
-#define sync_new_xor_optab (&direct_optab_table[(int) DOI_sync_new_xor])
-#define sync_new_nand_optab (&direct_optab_table[(int) DOI_sync_new_nand])
-#define sync_compare_and_swap_optab \
- (&direct_optab_table[(int) DOI_sync_compare_and_swap])
-#define sync_lock_test_and_set_optab \
- (&direct_optab_table[(int) DOI_sync_lock_test_and_set])
-#define sync_lock_release_optab \
- (&direct_optab_table[(int) DOI_sync_lock_release])
#define atomic_exchange_optab \
(&direct_optab_table[(int) DOI_atomic_exchange])
extern void set_conv_libfunc (convert_optab, enum machine_mode,
enum machine_mode, const char *);
+/* Call this to install all of the __sync libcalls up to size MAX. */
+extern void init_sync_libfuncs (int max);
+
/* Generate code for a FIXED_CONVERT_EXPR. */
extern void expand_fixed_convert (rtx, rtx, int, int);
enum insn_code can_float_p (enum machine_mode, enum machine_mode, int);
/* Return true if there is an inline compare and swap pattern. */
-extern bool can_compare_and_swap_p (enum machine_mode);
+extern bool can_compare_and_swap_p (enum machine_mode, bool);
/* Generate code for a compare and swap. */
extern bool expand_atomic_compare_and_swap (rtx *, rtx *, rtx, rtx, rtx, bool,
OSDN Git Service
