# configure script. Putting it in a separate shell file lets us skip
# running autoconf when modifying target-specific information.
-# This file switches on the shell variable ${machine}, and also uses the
+# This file switches on the shell variable ${target}, and also uses the
# following shell variables:
#
# with_* Various variables as set by configure.
# This file sets the following shell variables for use by the
# autoconf-generated configure script:
#
-# cpu_type The name of the cpu, if different from machine.
+# cpu_type The name of the cpu, if different from the first
+# chunk of the canonical target name.
#
# tm_defines List of target macros to define for all compilations.
#
md_file=
# Obsolete configurations.
-case $machine in
+case ${target} in
dummy)
if test "x$enable_obsolete" != xyes; then
- echo "*** Configuration $machine is obsolete." >&2
+ echo "*** Configuration ${target} is obsolete." >&2
echo "*** Specify --enable-obsolete to build it anyway." >&2
echo "*** Support will be REMOVED in the next major release of GCC," >&2
echo "*** unless a maintainer comes forward." >&2
# Unsupported targets list. Do not put an entry in this list unless
# it would otherwise be caught by a more permissive pattern. The list
# should be in alphabetical order.
-case $machine in
+case ${target} in
alpha*-*-linux*libc1* \
| i[34567]86-sequent-sysv \
| i[34567]86-sequent-sysv[123]* \
| *-*-rtemsaout* \
| *-*-rtemscoff* \
)
- echo "*** Configuration $machine not supported" 1>&2
+ echo "*** Configuration ${target} not supported" 1>&2
exit 1
;;
esac
# updated in each machine entry. Also set default extra_headers for some
# machines.
tm_p_file=
-cpu_type=`echo $machine | sed 's/-.*$//'`
-case $machine in
+cpu_type=`echo ${target} | sed 's/-.*$//'`
+case ${target} in
alpha*-*-*)
cpu_type=alpha
need_64bit_hwint=yes
extra_modes=${cpu_type}/${cpu_type}-modes.def
fi
-case $machine in
+case ${target} in
x86_64-*-*)
tm_file="i386/biarch64.h ${tm_file}"
;;
esac
# On a.out targets, we need to use collect2.
-case $machine in
+case ${target} in
*-*-*aout*)
use_collect2=yes
;;
esac
# Common parts for widely ported systems.
-case $machine in
+case ${target} in
*-*-linux*)
- case $machine in
+ case ${target} in
*-*-linux*libc1* | *-*-linux*aout*)
;;
*)
# These details are the same as for Linux.
# But here we need a little extra magic.
tmake_file="t-slibgcc-elf-ver t-linux t-gnu"
- case $machine in
+ case ${target} in
alpha*)
tm_file="${cpu_type}/${cpu_type}.h alpha/elf.h alpha/linux.h alpha/linux-elf.h gnu.h ${tm_file}"
;;
# Allow them to be explicitly enabled on any other version.
case x${enable_threads} in
x)
- case $machine in
+ case ${target} in
*-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
thread_file='posix'
tm_defines="${tm_defines} NETBSD_ENABLE_PTHREADS"
# NetBSD 1.7 and later are set up to use GCC's crtstuff for
# ELF configurations. We will clear extra_parts in the
# a.out configurations.
- case $machine in
+ case ${target} in
*-*-netbsd*1.[7-9]* | *-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o crtbeginT.o"
;;
# NetBSD 2.0 and later provide __cxa_atexit(), which we use by
# default (unless overridden by --disable-__cxa_atexit).
- case $machine in
+ case ${target} in
*-*-netbsd[2-9]* | *-*-netbsdelf[2-9]*)
default_use_cxa_atexit=yes
;;
gas=yes
gnu_ld=yes
extra_parts="crtbegin.o crtend.o crtbeginS.o crtendS.o"
- case $machine in
+ case ${target} in
*-*-freebsd3 | *-*-freebsd[3].*) fbsd_tm_file="freebsd3.h";;
*-*-freebsd4 | *-*-freebsd[4].*) fbsd_tm_file="freebsd4.h";;
*-*-freebsd5 | *-*-freebsd[5].*) fbsd_tm_file="freebsd5.h";;
tmake_file="${tmake_file} t-freebsd-thread"
# Before 5.0, FreeBSD can't bind shared libraries to -lc
# when "optionally" threaded via weak pthread_* checks.
- case $machine in
+ case ${target} in
*-*-freebsd[34] | *-*-freebsd[34].*)
tmake_file="${tmake_file} t-slibgcc-nolc-override";;
esac
;;
esac
-case $machine in
+case ${target} in
# Support site-specific machine types.
*local*)
- rest=`echo $machine | sed -e "s/$cpu_type-//"`
+ rest=`echo ${target} | sed -e "s/$cpu_type-//"`
tm_file=${cpu_type}/$rest.h
if test -f $srcdir/config/${cpu_type}/xm-$rest.h
then xm_file=${cpu_type}/xm-$rest.h
tmake_file="alpha/t-alpha alpha/t-ieee alpha/t-crtfm alpha/t-osf4"
tm_file="${tm_file} alpha/osf.h"
extra_headers=va_list.h
- case $machine in
+ case ${target} in
*-*-osf4*)
# Set target_cpu_default except on 4.0a.
- case $machine in
+ case ${target} in
*-*-osf4.0a) ;;
*) target_cpu_default=MASK_SUPPORT_ARCH
esac
if test x$enable_threads = xyes; then
thread_file='win32'
fi
- case $machine in
+ case ${target} in
*mingw32crt*)
tm_file="${tm_file} i386/crtdll.h"
;;
;;
m68010-*-netbsdelf* | m68k*-*-netbsdelf*)
tm_file="${tm_file} dbxelf.h elfos.h netbsd.h netbsd-elf.h m68k/netbsd-elf.h"
- case $machine in
+ case ${target} in
m68010*)
target_cpu_default="0"
;;
;;
mips*-*-linux*) # Linux MIPS, either endian.
tm_file="dbxelf.h elfos.h svr4.h linux.h ${tm_file} mips/linux.h"
- case $machine in
+ case ${target} in
mipsisa32*-*)
target_cpu_default="MASK_SOFT_FLOAT"
tm_defines="MIPS_ISA_DEFAULT=32"
tm_defines="OBSD_HAS_DECLARE_FUNCTION_NAME OBSD_HAS_DECLARE_OBJECT OBSD_HAS_CORRECT_SPECS"
target_cpu_default="MASK_GAS|MASK_ABICALLS"
tm_file="mips/mips.h openbsd.h mips/openbsd.h mips/sdb.h"
- case $machine in
+ case ${target} in
mips*el-*-openbsd*)
tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=0";;
*) tm_defines="${tm_defines} TARGET_ENDIAN_DEFAULT=MASK_BIG_ENDIAN";;
use_collect2=no
;;
ns32k-*-netbsdelf*)
- echo "GCC does not yet support the ${machine} target"; exit 1
+ echo "GCC does not yet support the ${target} target"; exit 1
;;
ns32k-*-netbsd*)
tm_file="${tm_file} netbsd.h netbsd-aout.h ns32k/netbsd.h"
;;
sh-*-elf* | sh[2346l]*-*-elf* | sh*-*-kaos*)
tmake_file="sh/t-sh sh/t-elf"
- case $machine in
+ case ${target} in
shl* | sh64l*)
tm_file="sh/little.h ${tm_file}"
tmake_file="${tmake_file} sh/t-le"
;;
esac
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/embed-elf.h"
- case $machine in
+ case ${target} in
sh64*)
tmake_file="${tmake_file} sh/t-sh64"
tm_file="${tm_file} sh/sh64.h"
sh2e*) target_cpu_default="SELECT_SH2E" ;;
sh2*) target_cpu_default="SELECT_SH2" ;;
esac
- case $machine in
+ case ${target} in
sh[234]*) tmake_file="${tmake_file} sh/t-monolib" ;;
esac
- case $machine in
+ case ${target} in
sh*-*-kaos*) tm_file="${tm_file} kaos.h sh/kaos-sh.h" ;;
esac
;;
;;
sh-*-linux* | sh[2346lbe]*-*-linux*)
tmake_file="sh/t-sh sh/t-elf t-slibgcc-elf-ver t-linux"
- case $machine in
+ case ${target} in
sh*be-*-* | sh*eb-*-*) ;;
*)
tm_file="sh/little.h ${tm_file}"
esac
tmake_file="${tmake_file} sh/t-linux"
tm_file="${tm_file} dbxelf.h elfos.h svr4.h sh/elf.h sh/linux.h"
- case $machine in
+ case ${target} in
sh64*)
tmake_file="${tmake_file} sh/t-sh64"
tm_file="${tm_file} sh/sh64.h"
sh2e*) target_cpu_default="SELECT_SH2E" ;;
sh2*) target_cpu_default="SELECT_SH2" ;;
esac
- case $machine in
+ case ${target} in
sh[234]*) tmake_file="${tmake_file} sh/t-monolib" ;;
esac
use_fixproto=no
sh64-*-netbsd* | sh64l*-*-netbsd*)
tm_file="${tm_file} dbxelf.h elfos.h sh/elf.h netbsd.h netbsd-elf.h sh/netbsd-elf.h"
tmake_file="${tmake_file} sh/t-sh sh/t-elf"
- case $machine in
+ case ${target} in
sh*l*-*)
tm_file="sh/little.h ${tm_file}"
tmake_file="${tmake_file} sh/t-le"
tmake_file="${tmake_file} sh/t-be"
;;
esac
- case $machine in
+ case ${target} in
sh5*-*)
# SHmedia, 32-bit ABI
target_cpu_default="SH5_BIT|SH4_BIT|SH3_BIT|SH_E_BIT"
else
tmake_file="$tmake_file t-slibgcc-sld"
fi
- case $machine in
+ case ${target} in
*-*-solaris2.[0-6] | *-*-solaris2.[0-6].*)
if test x$gnu_ld = xno; then
tm_file="${tm_file} sparc/sol26-sld.h"
tm_file="${tm_file} vax/ultrix.h"
;;
vax-*-vms*) # VAXen running VMS
- echo "Configuration $machine no longer supported" 1>&2
+ echo "Configuration ${target} no longer supported" 1>&2
exit 1
;;
vax-*-*) # VAX default entry
use_fixproto=no
;;
*)
- echo "*** Configuration $machine not supported" 1>&2
+ echo "*** Configuration ${target} not supported" 1>&2
exit 1
;;
esac
;;
esac
- # If there is no $with_cpu option, try to infer one from ${machine}.
+ # If there is no $with_cpu option, try to infer one from ${target}.
# This block sets nothing except for with_cpu.
if test x$with_cpu = x
then
- case $machine in
+ case ${target} in
ep9312-*-*)
# A Cirrus ARM variant.
with_cpu="ep9312"
with_cpu=k8
;;
alpha*-*-*)
- case $machine in
+ case ${target} in
alphaev6[78]*)
with_cpu=ev67
;;
esac
;;
sparc*-*-*)
- with_cpu="`echo $machine | sed 's/-.*$//'`"
+ with_cpu="`echo ${target} | sed 's/-.*$//'`"
if [ x$with_cpu = xsparc64 ]; then
with_cpu=v9
fi
# Similarly for --with-schedule.
if test x$with_schedule = x; then
- case $machine in
+ case ${target} in
hppa1* | parisc1*)
# Override default PA8000 scheduling model.
with_schedule=7100LC
# supported_defaults.
supported_defaults=
- case "$machine" in
+ case "${target}" in
alpha*-*-*)
supported_defaults="cpu tune"
for which in cpu tune; do
# Set some miscellaneous flags for particular targets.
target_cpu_default2=
- case $machine in
+ case ${target} in
alpha*-*-*)
if test x$gas = xyes
then
;;
mips*-*-*)
- case $machine in
+ case ${target} in
mips*-*-ecoff* | mips*-*-elf*)
if test x$gas = xyes
then
fi
;;
esac
- case $machine in
+ case ${target} in
mips*el-*-*)
tm_defines="TARGET_ENDIAN_DEFAULT=0 $tm_defines"
;;
target_gtfiles=
# Collect target-machine-specific information.
-for machine in $target ; do
- . ${srcdir}/config.gcc
-done
+. ${srcdir}/config.gcc
extra_objs="${host_extra_objs} ${extra_objs}"
. ../intl/config.intl
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:5386: checking whether NLS is requested" >&5
+echo "configure:5384: checking whether NLS is requested" >&5
if test x"$USE_NLS" != xyes; then
echo "$ac_t""no" 1>&6
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:5397: checking for catalogs to be installed" >&5
+echo "configure:5395: checking for catalogs to be installed" >&5
# Look for .po and .gmo files in the source directory.
CATALOGS=
XLINGUAS=
case $host_os in
win32 | pe | cygwin* | mingw32* | uwin*)
echo $ac_n "checking whether windows registry support is requested""... $ac_c" 1>&6
-echo "configure:5447: checking whether windows registry support is requested" >&5
+echo "configure:5445: checking whether windows registry support is requested" >&5
if test "x$enable_win32_registry" != xno; then
cat >> confdefs.h <<\EOF
#define ENABLE_WIN32_REGISTRY 1
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for library containing RegOpenKeyExA""... $ac_c" 1>&6
-echo "configure:5456: checking for library containing RegOpenKeyExA" >&5
+echo "configure:5454: checking for library containing RegOpenKeyExA" >&5
if eval "test \"`echo '$''{'ac_cv_search_RegOpenKeyExA'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_func_search_save_LIBS="$LIBS"
ac_cv_search_RegOpenKeyExA="no"
cat > conftest.$ac_ext <<EOF
-#line 5463 "configure"
+#line 5461 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
RegOpenKeyExA()
; return 0; }
EOF
-if { (eval echo configure:5474: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5472: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_RegOpenKeyExA="none required"
else
test "$ac_cv_search_RegOpenKeyExA" = "no" && for i in advapi32; do
LIBS="-l$i $ac_func_search_save_LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5485 "configure"
+#line 5483 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
RegOpenKeyExA()
; return 0; }
EOF
-if { (eval echo configure:5496: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5494: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_search_RegOpenKeyExA="-l$i"
break
if test "x$enable_win32_registry" != xno; then
echo $ac_n "checking registry key on windows hosts""... $ac_c" 1>&6
-echo "configure:5538: checking registry key on windows hosts" >&5
+echo "configure:5536: checking registry key on windows hosts" >&5
cat >> confdefs.h <<EOF
#define WIN32_REGISTRY_KEY "$gcc_cv_win32_registry_key"
EOF
# build->target assembler and hope that it will have the same features
# as the host->target assembler we'll be using.
echo $ac_n "checking what assembler to use""... $ac_c" 1>&6
-echo "configure:5807: checking what assembler to use" >&5
+echo "configure:5805: checking what assembler to use" >&5
in_tree_gas=no
gcc_cv_as=
gcc_cv_gas_major_version=
# build->target linker and hope that it will have the same features
# as the host->target linker we'll be using.
echo $ac_n "checking what linker to use""... $ac_c" 1>&6
-echo "configure:5931: checking what linker to use" >&5
+echo "configure:5929: checking what linker to use" >&5
in_tree_ld=no
gcc_cv_ld=
gcc_cv_gld_major_version=
# Figure out what nm we will be using.
gcc_cv_binutils_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/binutils
echo $ac_n "checking what nm to use""... $ac_c" 1>&6
-echo "configure:6039: checking what nm to use" >&5
+echo "configure:6037: checking what nm to use" >&5
in_tree_nm=no
if test -x nm$host_exeext; then
gcc_cv_nm=./nm$host_exeext
# Figure out what objdump we will be using.
echo $ac_n "checking what objdump to use""... $ac_c" 1>&6
-echo "configure:6062: checking what objdump to use" >&5
+echo "configure:6060: checking what objdump to use" >&5
in_tree_objdump=no
if test -x objdump$host_exeext; then
gcc_cv_objdump=./objdump$host_exeext
# Figure out what assembler alignment features are present.
echo $ac_n "checking assembler for .balign and .p2align""... $ac_c" 1>&6
-echo "configure:6087: checking assembler for .balign and .p2align" >&5
+echo "configure:6085: checking assembler for .balign and .p2align" >&5
if eval "test \"`echo '$''{'gcc_cv_as_balign_and_p2align'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
elif test x$gcc_cv_as != x; then
echo '.balign 4
.p2align 2' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6099: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6097: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_balign_and_p2align=yes
else
fi
echo $ac_n "checking assembler for .p2align with maximum skip""... $ac_c" 1>&6
-echo "configure:6119: checking assembler for .p2align with maximum skip" >&5
+echo "configure:6117: checking assembler for .p2align with maximum skip" >&5
if eval "test \"`echo '$''{'gcc_cv_as_max_skip_p2align'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
elif test x$gcc_cv_as != x; then
echo '.p2align 4,,7' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6130: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6128: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_max_skip_p2align=yes
else
fi
echo $ac_n "checking assembler for working .subsection -1""... $ac_c" 1>&6
-echo "configure:6150: checking assembler for working .subsection -1" >&5
+echo "configure:6148: checking assembler for working .subsection -1" >&5
if eval "test \"`echo '$''{'gcc_cv_as_subsection_m1'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
.subsection -1
conftest_label2: .word 0
.previous' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6165: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6163: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
if test x$gcc_cv_nm != x; then
$gcc_cv_nm conftest.o | grep conftest_label1 > conftest.nm1
fi
echo $ac_n "checking assembler for .weak""... $ac_c" 1>&6
-echo "configure:6193: checking assembler for .weak" >&5
+echo "configure:6191: checking assembler for .weak" >&5
if eval "test \"`echo '$''{'gcc_cv_as_weak'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
elif test x$gcc_cv_as != x; then
echo ' .weak foobar' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6204: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6202: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_weak=yes
else
# to be safe.
# The gcc_GAS_CHECK_FEATURE call just sets a cache variable.
echo $ac_n "checking assembler for .hidden""... $ac_c" 1>&6
-echo "configure:6231: checking assembler for .hidden" >&5
+echo "configure:6229: checking assembler for .hidden" >&5
if eval "test \"`echo '$''{'gcc_cv_as_hidden'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
elif test x$gcc_cv_as != x; then
echo ' .hidden foobar
foobar:' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6244: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6242: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_hidden=yes
else
echo $ac_n "checking linker for .hidden support""... $ac_c" 1>&6
-echo "configure:6259: checking linker for .hidden support" >&5
+echo "configure:6257: checking linker for .hidden support" >&5
if eval "test \"`echo '$''{'gcc_cv_ld_hidden'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Check if we have .[us]leb128, and support symbol arithmetic with it.
echo $ac_n "checking assembler for .sleb128 and .uleb128""... $ac_c" 1>&6
-echo "configure:6322: checking assembler for .sleb128 and .uleb128" >&5
+echo "configure:6320: checking assembler for .sleb128 and .uleb128" >&5
if eval "test \"`echo '$''{'gcc_cv_as_leb128'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
.uleb128 1280
.sleb128 -1010
L2:' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6339: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6337: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
# GAS versions before 2.11 do not support uleb128,
# despite appearing to.
# GAS versions up to and including 2.11.0 may mis-optimize
# .eh_frame data.
echo $ac_n "checking assembler for eh_frame optimization""... $ac_c" 1>&6
-echo "configure:6375: checking assembler for eh_frame optimization" >&5
+echo "configure:6373: checking assembler for eh_frame optimization" >&5
if eval "test \"`echo '$''{'gcc_cv_as_eh_frame'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
.byte 0x4
.4byte .L1-.LFB1
.LEFDE1:' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6418: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6416: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
cat > conftest.lit <<EOF
0000 10000000 00000000 017a0001 781a0004 .........z..x...
|| cmp conftest.big conftest.got > /dev/null 2>&1; }
then
gcc_cv_as_eh_frame=yes
- elif { ac_try='$gcc_cv_as -o conftest.o --traditional-format /dev/null'; { (eval echo configure:6439: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+ elif { ac_try='$gcc_cv_as -o conftest.o --traditional-format /dev/null'; { (eval echo configure:6437: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
gcc_cv_as_eh_frame=buggy
else
# Uh oh, what do we do now?
fi
echo $ac_n "checking assembler for section merging support""... $ac_c" 1>&6
-echo "configure:6464: checking assembler for section merging support" >&5
+echo "configure:6462: checking assembler for section merging support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_shf_merge'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
elif test x$gcc_cv_as != x; then
echo '.section .rodata.str, "aMS", @progbits, 1' > conftest.s
- if { ac_try='$gcc_cv_as --fatal-warnings -o conftest.o conftest.s >&5'; { (eval echo configure:6476: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as --fatal-warnings -o conftest.o conftest.s >&5'; { (eval echo configure:6474: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_shf_merge=yes
else
: # If we don't have a check, assume no support.
else
echo $ac_n "checking assembler for thread-local storage support""... $ac_c" 1>&6
-echo "configure:6701: checking assembler for thread-local storage support" >&5
+echo "configure:6699: checking assembler for thread-local storage support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_tls'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
elif test x$gcc_cv_as != x; then
echo "$conftest_s" > conftest.s
- if { ac_try='$gcc_cv_as $tls_as_opt --fatal-warnings -o conftest.o conftest.s >&5'; { (eval echo configure:6712: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as $tls_as_opt --fatal-warnings -o conftest.o conftest.s >&5'; { (eval echo configure:6710: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_tls=yes
else
# All TARGET_ABI_OSF targets.
alpha*-*-osf* | alpha*-*-linux* | alpha*-*-*bsd*)
echo $ac_n "checking assembler for explicit relocation support""... $ac_c" 1>&6
-echo "configure:6738: checking assembler for explicit relocation support" >&5
+echo "configure:6736: checking assembler for explicit relocation support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_alpha_explicit_relocs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ldah $1, d($29) !gprelhigh
lda $1, d($1) !gprellow
lda $29, 0($29) !gpdisp!3' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6761: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6759: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_alpha_explicit_relocs=yes
else
sparc*-*-*)
echo $ac_n "checking assembler for .register""... $ac_c" 1>&6
-echo "configure:6783: checking assembler for .register" >&5
+echo "configure:6781: checking assembler for .register" >&5
if eval "test \"`echo '$''{'gcc_cv_as_sparc_register_op'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_as_sparc_register_op=no
if test x$gcc_cv_as != x; then
echo '.register %g2, #scratch' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6788: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_sparc_register_op=yes
else
fi
echo $ac_n "checking assembler for -relax option""... $ac_c" 1>&6
-echo "configure:6810: checking assembler for -relax option" >&5
+echo "configure:6808: checking assembler for -relax option" >&5
if eval "test \"`echo '$''{'gcc_cv_as_sparc_relax'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_as_sparc_relax=no
if test x$gcc_cv_as != x; then
echo '.text' > conftest.s
- if { ac_try='$gcc_cv_as -relax -o conftest.o conftest.s >&5'; { (eval echo configure:6817: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -relax -o conftest.o conftest.s >&5'; { (eval echo configure:6815: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_sparc_relax=yes
else
fi
echo $ac_n "checking assembler for unaligned pcrel relocs""... $ac_c" 1>&6
-echo "configure:6837: checking assembler for unaligned pcrel relocs" >&5
+echo "configure:6835: checking assembler for unaligned pcrel relocs" >&5
if eval "test \"`echo '$''{'gcc_cv_as_sparc_ua_pcrel'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
.align 4
.byte 0
.uaword %r_disp32(foo)' > conftest.s
- if { ac_try='$gcc_cv_as -K PIC -o conftest.o conftest.s >&5'; { (eval echo configure:6850: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -K PIC -o conftest.o conftest.s >&5'; { (eval echo configure:6848: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
if test x$gcc_cv_ld != x \
&& $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1; then
echo $ac_n "checking assembler for unaligned pcrel relocs against hidden symbols""... $ac_c" 1>&6
-echo "configure:6873: checking assembler for unaligned pcrel relocs against hidden symbols" >&5
+echo "configure:6871: checking assembler for unaligned pcrel relocs against hidden symbols" >&5
if eval "test \"`echo '$''{'gcc_cv_as_sparc_ua_pcrel_hidden'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
.hidden foo
foo:
.skip 4' > conftest.s
- if { ac_try='$gcc_cv_as -K PIC -o conftest.o conftest.s >&5'; { (eval echo configure:6888: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -K PIC -o conftest.o conftest.s >&5'; { (eval echo configure:6886: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
if test x$gcc_cv_ld != x && test x$gcc_cv_objdump != x \
&& $gcc_cv_ld -o conftest conftest.o -G > /dev/null 2>&1 \
fi # unaligned pcrel relocs
echo $ac_n "checking assembler for offsetable %lo()""... $ac_c" 1>&6
-echo "configure:6921: checking assembler for offsetable %lo()" >&5
+echo "configure:6919: checking assembler for offsetable %lo()" >&5
if eval "test \"`echo '$''{'gcc_cv_as_sparc_offsetable_lo10'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo '.text
or %g1, %lo(ab) + 12, %g1
or %g1, %lo(ab + 12), %g1' > conftest.s
- if { ac_try='$gcc_cv_as -xarch=v9 -o conftest.o conftest.s >&5'; { (eval echo configure:6930: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -xarch=v9 -o conftest.o conftest.s >&5'; { (eval echo configure:6928: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
if test x$gcc_cv_objdump != x \
&& %gcc_cv_objdump -s -j .text conftest.o 2> /dev/null \
i[34567]86-*-* | x86_64-*-*)
echo $ac_n "checking assembler for filds and fists mnemonics""... $ac_c" 1>&6
-echo "configure:6956: checking assembler for filds and fists mnemonics" >&5
+echo "configure:6954: checking assembler for filds and fists mnemonics" >&5
if eval "test \"`echo '$''{'gcc_cv_as_ix86_filds_fists'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
elif test x$gcc_cv_as != x; then
echo 'filds mem; fists mem' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6967: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6965: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_ix86_filds_fists=yes
else
fi
echo $ac_n "checking assembler for cmov syntax""... $ac_c" 1>&6
-echo "configure:6987: checking assembler for cmov syntax" >&5
+echo "configure:6985: checking assembler for cmov syntax" >&5
if eval "test \"`echo '$''{'gcc_cv_as_ix86_cmov_sun_syntax'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcc_cv_as_ix86_cmov_sun_syntax=no
if test x$gcc_cv_as != x; then
echo 'cmovl.l %edx, %eax' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6994: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:6992: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_ix86_cmov_sun_syntax=yes
else
# This one is used unconditionally by i386.[ch]; it is to be defined
# to 1 if the feature is present, 0 otherwise.
echo $ac_n "checking assembler for GOTOFF in data""... $ac_c" 1>&6
-echo "configure:7016: checking assembler for GOTOFF in data" >&5
+echo "configure:7014: checking assembler for GOTOFF in data" >&5
if eval "test \"`echo '$''{'gcc_cv_as_ix86_gotoff_in_data'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
nop
.data
.long .L0@GOTOFF' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7031: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7029: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_ix86_gotoff_in_data=yes
else
ia64*-*-*)
echo $ac_n "checking assembler for ltoffx and ldxmov relocs""... $ac_c" 1>&6
-echo "configure:7052: checking assembler for ltoffx and ldxmov relocs" >&5
+echo "configure:7050: checking assembler for ltoffx and ldxmov relocs" >&5
if eval "test \"`echo '$''{'gcc_cv_as_ia64_ltoffx_ldxmov_relocs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
addl r15 = @ltoffx(x#), gp
;;
ld8.mov r16 = [r15], x#' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7066: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7064: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_ia64_ltoffx_ldxmov_relocs=yes
else
mfcr 3,128"
echo $ac_n "checking assembler for mfcr field support""... $ac_c" 1>&6
-echo "configure:7096: checking assembler for mfcr field support" >&5
+echo "configure:7094: checking assembler for mfcr field support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_powerpc_mfcrf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
elif test x$gcc_cv_as != x; then
echo "$conftest_s" > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7107: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7105: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_powerpc_mfcrf=yes
else
mips*-*-*)
echo $ac_n "checking assembler for explicit relocation support""... $ac_c" 1>&6
-echo "configure:7129: checking assembler for explicit relocation support" >&5
+echo "configure:7127: checking assembler for explicit relocation support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_mips_explicit_relocs'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
elif test x$gcc_cv_as != x; then
echo ' lw $4,%gp_rel(foo)($4)' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7140: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7138: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_mips_explicit_relocs=yes
else
.loc 1 3 0
$insn"
echo $ac_n "checking assembler for dwarf2 debug_line support""... $ac_c" 1>&6
-echo "configure:7186: checking assembler for dwarf2 debug_line support" >&5
+echo "configure:7184: checking assembler for dwarf2 debug_line support" >&5
if eval "test \"`echo '$''{'gcc_cv_as_dwarf2_debug_line'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
elif test x$gcc_cv_as != x; then
echo "$conftest_s" > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7198: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7196: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
# ??? This fails with non-gnu grep. Maybe use objdump?
if grep debug_line conftest.o > /dev/null 2>&1; then
# by DW_AT_decl_file. Approximate this test by testing if
# the assembler bitches if the same index is assigned twice.
echo $ac_n "checking assembler for buggy dwarf2 .file directive""... $ac_c" 1>&6
-echo "configure:7220: checking assembler for buggy dwarf2 .file directive" >&5
+echo "configure:7218: checking assembler for buggy dwarf2 .file directive" >&5
if eval "test \"`echo '$''{'gcc_cv_as_dwarf2_file_buggy'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test x$gcc_cv_as != x; then
echo ' .file 1 "foo.s"
.file 1 "bar.s"' > conftest.s
- if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7228: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as -o conftest.o conftest.s >&5'; { (eval echo configure:7226: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_dwarf2_file_buggy=yes
else
fi
echo $ac_n "checking assembler for --gdwarf2 option""... $ac_c" 1>&6
-echo "configure:7251: checking assembler for --gdwarf2 option" >&5
+echo "configure:7249: checking assembler for --gdwarf2 option" >&5
if eval "test \"`echo '$''{'gcc_cv_as_gdwarf2_flag'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
elif test x$gcc_cv_as != x; then
echo "$insn" > conftest.s
- if { ac_try='$gcc_cv_as --gdwarf2 -o conftest.o conftest.s >&5'; { (eval echo configure:7263: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as --gdwarf2 -o conftest.o conftest.s >&5'; { (eval echo configure:7261: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
gcc_cv_as_gdwarf2_flag=yes
else
fi
echo $ac_n "checking assembler for --gstabs option""... $ac_c" 1>&6
-echo "configure:7283: checking assembler for --gstabs option" >&5
+echo "configure:7281: checking assembler for --gstabs option" >&5
if eval "test \"`echo '$''{'gcc_cv_as_gstabs_flag'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
elif test x$gcc_cv_as != x; then
echo "$insn" > conftest.s
- if { ac_try='$gcc_cv_as --gstabs -o conftest.o conftest.s >&5'; { (eval echo configure:7295: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as --gstabs -o conftest.o conftest.s >&5'; { (eval echo configure:7293: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then
# The native Solaris 9/Intel assembler doesn't understand --gstabs
# and warns about it, but still exits successfully. So check for
# this.
- if { ac_try='$gcc_cv_as --gstabs -o conftest.o conftest.s 2>&1 | grep -i warning > /dev/null'; { (eval echo configure:7300: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
+ if { ac_try='$gcc_cv_as --gstabs -o conftest.o conftest.s 2>&1 | grep -i warning > /dev/null'; { (eval echo configure:7298: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }
then :
else gcc_cv_as_gstabs_flag=yes
fi
fi
echo $ac_n "checking linker read-only and read-write section mixing""... $ac_c" 1>&6
-echo "configure:7322: checking linker read-only and read-write section mixing" >&5
+echo "configure:7320: checking linker read-only and read-write section mixing" >&5
gcc_cv_ld_ro_rw_mix=unknown
if test $in_tree_ld = yes ; then
if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 10 -o "$gcc_cv_gld_major_version" -gt 2 \
echo "$ac_t""$gcc_cv_ld_ro_rw_mix" 1>&6
echo $ac_n "checking linker PT_GNU_EH_FRAME support""... $ac_c" 1>&6
-echo "configure:7361: checking linker PT_GNU_EH_FRAME support" >&5
+echo "configure:7359: checking linker PT_GNU_EH_FRAME support" >&5
gcc_cv_ld_eh_frame_hdr=no
if test $in_tree_ld = yes ; then
if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 12 -o "$gcc_cv_gld_major_version" -gt 2 \
echo "$ac_t""$gcc_cv_ld_eh_frame_hdr" 1>&6
echo $ac_n "checking linker position independent executable support""... $ac_c" 1>&6
-echo "configure:7383: checking linker position independent executable support" >&5
+echo "configure:7381: checking linker position independent executable support" >&5
gcc_cv_ld_pie=no
if test $in_tree_ld = yes ; then
if test "$gcc_cv_gld_major_version" -eq 2 -a "$gcc_cv_gld_minor_version" -ge 15 -o "$gcc_cv_gld_major_version" -gt 2 \
case "$target" in
mips*-*-*)
echo $ac_n "checking whether libgloss uses STARTUP directives consistently""... $ac_c" 1>&6
-echo "configure:7408: checking whether libgloss uses STARTUP directives consistently" >&5
+echo "configure:7406: checking whether libgloss uses STARTUP directives consistently" >&5
gcc_cv_mips_libgloss_startup=no
gcc_cv_libgloss_srcdir=`echo $srcdir | sed -e 's,/gcc$,,'`/libgloss
if test "x$exec_prefix" = xNONE; then
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:7610: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:7608: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
OSDN Git Service
