--- /dev/null
+%
+% This is part of CLFSja package.
+%
+% This is a CTIE change file for the original XML source of the CLFSbook.
+%
+@x
+<?xml version="1.0" encoding="ISO-8859-1"?>
+@y
+<?xml version="1.0" encoding="UTF-8"?>
+@z
+
+@x
+ <para>The Sysvinit package contains programs for controlling the startup,
+ running, and shutdown of the system.</para>
+@y
+ <para>
+ Sysvinit パッケージは、システムの起動、実行、シャットダウンを制御するプログラムを提供します。
+ </para>
+@z
+
+@x
+ <title>Installation of Sysvinit</title>
+@y
+ <title>&InstallationOf1;Sysvinit &InstallationOf2;</title>
+@z
+
+@x
+ <para os ="a">Apply a <command>sed</command> to disable several programs
+ from being built and installed as better versions are provided by
+ other packages:</para>
+@y
+ <para os ="a">
+ 以下の <command>sed</command> を実行してプログラム中のいくつかはビルドおよびインストールしないようにします。
+ これは他のパッケージがより良いプログラムを提供しているためです。
+ </para>
+@z
+
+@x
+ <para os ="c">Compile the package:</para>
+@y
+ <para os ="c">&CompileThePackage;</para>
+@z
+
+@x
+ <para os="e">Install the package:</para>
+@y
+ <para os="e">&InstallThePackage;</para>
+@z
+
+@x
+ <title>Configuring Sysvinit</title>
+@y
+ <title>&Configuring1;Sysvinit &Configuring2;</title>
+@z
+
+@x
+ <secondary>configuring</secondary></indexterm>
+@y
+ <secondary>設定</secondary></indexterm>
+@z
+
+@x
+ <para>Create a new file <filename>/etc/inittab</filename> by running the
+ following:</para>
+@y
+ <para>
+ 以下のコマンドを実行して <filename>/etc/inittab</filename> を新たに生成します。
+ </para>
+@z
+
+@x
+ <para>The following command adds the standard virtual terminals to
+ <filename>/etc/inittab</filename>. If your system only has a serial
+ console skip the following command:</para>
+@y
+ <para>
+ 以下のコマンドは <filename>/etc/inittab</filename> に対して標準的な仮想端末を追加します。
+ もしシリアルコンソールしか有していないシステムの場合は、このコマンド実行は省略してください。
+ </para>
+@z
+
+@x
+ <para>If your system has a serial console run the following command to add
+ the entry to <filename>/etc/inittab</filename>:</para>
+@y
+ <para>
+ シリアルコンソールを有している場合は、以下のコマンドを実行して <filename>/etc/inittab</filename> へ項目追加します。
+ </para>
+@z
+
+@x
+ <para>Finally, add the end line to <filename>/etc/inittab</filename>:</para>
+@y
+ <para>
+ <filename>/etc/inittab</filename> に最終行を加えます。
+ </para>
+@z
+
+@x
+ <para>The <parameter>-I '\033(K'</parameter> option tells
+ <command>agetty</command> to send this escape sequence to the terminal
+ before doing anything else. This escape sequence switches the console
+ character set to a user-defined one, which can be modified by running
+ the <command>setfont</command> program. The <command>i18n</command>
+ initscript from the CLFS-Bootscripts package calls the
+ <command>setfont</command> program during system startup. Sending this
+ escape sequence is necessary for people who use non-ISO 8859-1 screen
+ fonts, but it does not affect native English speakers.</para>
+@y
+ <para>
+ <parameter>-I '\033(K'</parameter> オプションは <command>agetty</command> が端末に対してまず初めにこのエスケープシーケンスを送るものです。
+ これによって端末のキャラクターセットがユーザー指定のものに切り替わります。
+ <command>setfont</command> プログラムを用いればキャラクターセットは変更できます。
+ CLFS-Bootscripts パッケージが提供する初期化スクリプト <command>i18n</command> はシステム起動時に <command>setfont</command> プログラムを呼び出します。
+ ISO 8859-1 以外のスクリーンフォントを利用するユーザーにとって、このエスケープシーケンスの送信は重要なものです。
+ 英語圏ユーザーにとっては不要なものです。
+ </para>
+@z
+
+@x
+ <title>Contents of Sysvinit</title>
+@y
+ <title>&ContentsOf1;Sysvinit &ContentsOf2;</title>
+@z
+
+@x
+ <segtitle>Installed programs</segtitle>
+@y
+ <segtitle>&InstalledProgram;</segtitle>
+@z
+
+@x
+ <seg>bootlogd, fstab-decode, halt, init, killall5, poweroff
+ (link to halt), reboot (link to halt), runlevel, shutdown, telinit
+ (link to init)</seg>
+@y
+ <seg>bootlogd, fstab-decode, halt, init, killall5,
+ poweroff (&LinkTo1;halt&LinkTo2;), reboot (&LinkTo1;halt&LinkTo2;), runlevel,
+ shutdown, telinit (&LinkTo1;init&LinkTo2;)</seg>
+@z
+
+@x
+ <bridgehead renderas="sect3">Short Descriptions</bridgehead>
+@y
+ <bridgehead renderas="sect3">&ShortDescriptions;</bridgehead>
+@z
+
+@x bootlogd
+ <para>Logs boot messages to a log file</para>
+@y
+ <para>
+ ブート時のメッセージをログファイルに出力します。
+ </para>
+@z
+
+@x fstab-decode
+ <para>Runs a command with fstab-encoded arguments</para>
+@y
+ <para>
+ fstab 形式の (fstab-encoded の) 引数とともにコマンドを実行します。
+ </para>
+@z
+
+@x halt
+ <para>Normally invokes <command>shutdown</command> with the
+ <parameter>-h</parameter> option, except when already in run-level 0,
+ then it tells the kernel to halt the system; it notes in the
+ file <filename>/var/log/wtmp</filename> that the system is being
+ brought down</para>
+@y
+ <para>
+ ランレベルが既に 0 ではない通常の起動状態の場合に <command>shutdown</command> をオプション <parameter>-h </parameter> をつけて実行します。
+ そしてカーネルに対してシステム停止を指示します。
+ システムが停止される状況は <filename>/var/log/wtmp</filename> ファイルに記録されます。
+ </para>
+@z
+
+@x init
+ <para>The first process to be started when the kernel has initialized
+ the hardware which takes over the boot process and starts all the
+ proceses it is instructed to</para>
+@y
+ <para>
+ カーネルがハードウェアを初期化した後に、最初に起動するプロセスです。
+ ブート処理がこのプロセスに引き継がれ、指示されたプロセスをすべて起動していきます。
+ </para>
+@z
+
+@x killall5
+ <para>Sends a signal to all processes, except the processes in its own
+ session so it will not kill the shell running the script that called
+ it</para>
+@y
+ <para>
+ プロセスすべてに対してシグナルを送信します。
+ ただし自分のセッション内の起動プロセスは除きます。
+ つまり本コマンドを実行したシェルは停止しません。
+ </para>
+@z
+
+@x poweroff
+ <para>Tells the kernel to halt the system and switch off the computer
+ (see <command>halt</command>)</para>
+@y
+ <para>
+ カーネルに対してシステムの停止を指示し、コンピューターの電源を切ります。(<command>halt</command> を参照してください。)
+ </para>
+@z
+
+@x reboot
+ <para>Tells the kernel to reboot the system (see
+ <command>halt</command>)</para>
+@y
+ <para>
+ カーネルに対してシステムの再起動を指示します。(<command>halt</command> を参照してください。)
+ </para>
+@z
+
+@x runlevel
+ <para>Reports the previous and the current run-level, as noted in
+ the last run-level record in <filename>/run/utmp</filename></para>
+@y
+ <para>
+ 現在のランレベルと直前のランレベルを表示します。
+ 最新のランレベルは <filename>/run/utmp</filename> ファイルに記録されています。
+ </para>
+@z
+
+@x shutdown
+ <para>Brings the system down in a secure way, signaling all processes
+ and notifying all logged-in users</para>
+@y
+ <para>
+ システムの終了を安全に行います。
+ その際にはプロセスすべてへのシグナル送信を行い、ログインユーザーへの通知も行います。
+ </para>
+@z
+
+@x telinit
+ <para>Tells <command>init</command> which run-level to change to</para>
+@y
+ <para>
+ <command>init</command> に対してランレベルの変更を指示します。
+ </para>
+@z
\ No newline at end of file