-2076-02-02 H.J. Lu <hongjiu.lu@intel.com>
+2007-04-30 Mark Salter <msalter@redhat.com>
+
+ * frv-desc.c: Regenerate.
+ * frv-desc.h: Regenerate.
+
+2007-04-30 Alan Modra <amodra@bigpond.net.au>
+
+ PR 4436
+ * ppc-opc.c (powerpc_operands): Correct bitm for second entry of MBE.
+
+2007-04-27 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (modrm): Put reg before rm.
+
+2007-04-26 H.J. Lu <hongjiu.lu@intel.com>
+
+ PR binutils/4430
+ * i386-dis.c (print_displacement): New.
+ (OP_E): Call print_displacement instead of print_operand_value
+ to output displacement when either base or index exist. Print
+ the explicit zero displacement in 16bit mode.
+
+2007-04-26 H.J. Lu <hongjiu.lu@intel.com>
+
+ PR binutils/4429
+ * i386-dis.c (print_insn): Also swap the order of op_riprel
+ when swapping op_index. Break when the RIP relative address
+ is printed.
+ (OP_E): Properly handle RIP relative addressing and print the
+ explicit zero displacement for Intel mode.
+
+2007-04-27 Alan Modra <amodra@bigpond.net.au>
+
+ * Makefile.am: Run "make dep-am".
+ * Makefile.in: Regenerate.
+ * ns32k-dis.c: Include sysdep.h first.
+
+2007-04-24 Andreas Krebbel <krebbel1@de.ibm.com>
+
+ * opcodes/s390-opc.c (MASK_SSF_RRDRD): Fourth nybble belongs to the
+ opcode.
+ * opcodes/s390-opc.txt (pfpo, ectg, csst): Add new z9-ec instructions.
+
+2007-04-24 Nick Clifton <nickc@redhat.com>
+
+ * arm-dis.c (print_insn): Initialise type.
+
+2007-04-24 Alan Modra <amodra@bigpond.net.au>
+
+ * cgen-types.h: Include bfd_stdint.h, not stdint.h.
+ * Makefile.am: Run "make dep-am".
+ * Makefile.in: Regenerate.
+
+2007-04-23 Nathan Sidwell <nathan@codesourcery.com>
+
+ * m68k-opc.c: Mark mcfisa_c instructions.
+
+2007-04-21 Richard Earnshaw <rearnsha@arm.com>
+
+ * arm-dis.c (arm_opcodes): Disassemble to unified syntax.
+ (thumb_opcodes): Add missing white space in adr.
+ (arm_decode_shift): New parameter, print_shift. Only decode the
+ shift parameter if set. Adjust callers.
+ (print_insn_arm): Support for operand type q with no shift decode.
+
+2007-04-21 Alan Modra <amodra@bigpond.net.au>
+
+ * i386-opc.c (i386_float_regtab, i386_float_regtab_size): Delete.
+ Move contents to..
+ (i386_regtab): ..here.
+ * i386-opc.h (i386_float_regtab, i386_float_regtab_size): Delete.
+
+ * ppc-opc.c (powerpc_operands): Delete duplicate entries.
+ (BA_MASK, FXM_MASK, STRM_MASK, VA_MASK, VB_MASK, VC_MASK): Delete.
+ (VD_MASK, WS_MASK, MTMSRD_L, XRT_L): Delete.
+ (powerpc_opcodes): Replace uses of MTMSRD_L and XRT_L.
+
+2007-04-20 Nathan Sidwell <nathan@codesourcery.com>
+
+ * m68k-dis.c (print_insn_arg): Show c04 as rambar0 and c05 as
+ rambar1.
+
+2007-04-20 Alan Modra <amodra@bigpond.net.au>
+
+ * ppc-dis.c (print_insn_powerpc): Adjust for struct powerpc_operand
+ change.
+ * ppc-opc.c (powerpc_operands): Replace bit count with bit mask
+ in all entries. Add PPC_OPERAND_SIGNED to DE entry. Remove
+ references to following deleted functions.
+ (insert_bd, extract_bd, insert_dq, extract_dq): Delete.
+ (insert_ds, extract_ds, insert_de, extract_de): Delete.
+ (insert_des, extract_des, insert_li, extract_li): Delete.
+ (insert_nb, insert_rsq, insert_rtq, insert_ev2, extract_ev2): Delete.
+ (insert_ev4, extract_ev4, insert_ev8, extract_ev8): Delete.
+ (num_powerpc_operands): New constant.
+ (XSPRG_MASK): Remove entire SPRG field.
+ (powerpc_opcodes <bcctre, bcctrel>): Use XLBB_MASK not XLYBB_MASK.
+
+2007-04-20 Alan Modra <amodra@bigpond.net.au>
+
+ * ppc-opc.c (DCM, DGM, TE, RMC, R, SP, S): Correct shift.
+ (Z2_MASK): Define.
+ (powerpc_opcodes): Use Z2_MASK in all insns taking RMC operand.
+
+2007-04-20 Richard Earnshaw <rearnsha@arm.com>
+
+ * arm-dis.c (print_insn): Only look for a mapping symbol in the section
+ being disassembled.
+
+2007-04-19 Alan Modra <amodra@bigpond.net.au>
+
+ * Makefile.am: Run "make dep-am".
+ * Makefile.in: Regenerate.
+ * po/POTFILES.in: Regenerate.
+
+2007-04-19 Alan Modra <amodra@bigpond.net.au>
+
+ * ppc-opc.c (powerpc_opcodes): Add cctpl, cctpm, cctph, db8cyc,
+ db10cyc, db12cyc, db16cyc.
+
+2007-04-19 Nathan Froyd <froydnj@codesourcery.com>
+
+ * ppc-opc.c (powerpc_opcodes): Recognize three-operand tlbsxe.
+
+2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (CRC32_Fixup): New.
+ (PREGRP85, PREGRP86, PREGRP87, PREGRP88, PREGRP89, PREGRP90,
+ PREGRP91): New.
+ (threebyte_0x38_uses_DATA_prefix): Updated for SSE4.2.
+ (threebyte_0x3a_uses_DATA_prefix): Likewise.
+ (prefix_user_table): Add PREGRP85, PREGRP86, PREGRP87,
+ PREGRP88, PREGRP89, PREGRP90 and PREGRP91.
+ (three_byte_table): Likewise.
+
+ * i386-opc.c (i386_optab): Add SSE4.2 opcodes.
+
+ * i386-opc.h (CpuSSE4_2): New.
+ (CpuSSE4): Likewise.
+ (CpuUnknownFlags): Add CpuSSE4_2.
+
+2007-04-18 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (XMM_Fixup): New.
+ (Edqb): New.
+ (Edqd): New.
+ (XMM0): New.
+ (dqb_mode): New.
+ (dqd_mode): New.
+ (PREGRP39 ... PREGRP85): New.
+ (threebyte_0x38_uses_DATA_prefix): Updated for SSE4.
+ (threebyte_0x3a_uses_DATA_prefix): Likewise.
+ (prefix_user_table): Add PREGRP39 ... PREGRP85.
+ (three_byte_table): Likewise.
+ (putop): Handle 'K'.
+ (intel_operand_size): Handle dqb_mode, dqd_mode):
+ (OP_E): Likewise.
+ (OP_G): Likewise.
+
+ * i386-opc.c (i386_optab): Add SSE4.1 opcodes.
+
+ * i386-opc.h (CpuSSE4_1): New.
+ (CpuUnknownFlags): Add CpuSSE4_1.
+ (regKludge): Update comment.
+
+2007-04-18 Matthias Klose <doko@ubuntu.com>
+
+ * Makefile.am (libopcodes_la_LDFLAGS): Use bfd soversion.
+ * Makefile.in: Regenerate.
+
+2007-04-14 Steve Ellcey <sje@cup.hp.com>
+
+ * Makefile.am: Add ACLOCAL_AMFLAGS.
+ * Makefile.in: Regenerate.
+
+2007-04-13 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c: Remove trailing white spaces.
+ * i386-opc.c: Likewise.
+ * i386-opc.h: Likewise.
+
+2007-04-11 H.J. Lu <hongjiu.lu@intel.com>
+
+ PR binutils/4333
+ * i386-dis.c (GRP1a): New.
+ (GRP1b ... GRPPADLCK2): Update index.
+ (dis386): Use GRP1a for entry 0x8f.
+ (mod, rm, reg): Removed. Replaced by ...
+ (modrm): This.
+ (grps): Add GRP1a.
+
+2007-04-09 Kazu Hirata <kazu@codesourcery.com>
+
+ * m68k-dis.c (print_insn_m68k): Restore info->fprintf_func and
+ info->print_address_func if longjmp is called.
+
+2007-03-29 DJ Delorie <dj@redhat.com>
+
+ * m32c-desc.c: Regenerate.
+ * m32c-dis.c: Regenerate.
+ * m32c-opc.c: Regenerate.
+
+2007-03-28 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-opc.c (i386_optab): Change InvMem to RegMem for mov and
+ movq. Remove InvMem from sldt, smsw and str.
+
+ * i386-opc.h (InvMem): Renamed to ...
+ (RegMem): Update comments.
+ (AnyMem): Remove InvMem.
+
+2007-03-27 Paul Brook <paul@codesourcery.com>
+
+ * arm-dis.c (thumb_opcodes): Add entry for undefined insns (0xbe??).
+
+2007-03-24 Paul Brook <paul@codesourcery.com>
+
+ * arm-dis.c (coprocessor_opcodes): Remove superfluous 0x.
+ (print_insn_coprocessor): Handle %<bitfield>x.
+
+2007-03-24 Paul Brook <paul@codesourcery.com>
+ Mark Shinwell <shinwell@codesourcery.com>
+
+ * arm-dis.c (arm_opcodes): Print SRS base register.
+
+2007-03-23 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (prefix_name): Replace rex64XYZ with rex.WRXB.
+
+ * i386-opc.c (i386_optab): Add rex.wrxb.
+
+2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (REX_MODE64): Remove definition.
+ (REX_EXTX): Likewise.
+ (REX_EXTY): Likewise.
+ (REX_EXTZ): Likewise.
+ (USED_REX): Use REX_OPCODE instead of 0x40.
+ Replace REX_MODE64, REX_EXTX, REX_EXTY and REX_EXTZ with REX_W,
+ REX_R, REX_X and REX_B respectively.
+
+2007-03-21 H.J. Lu <hongjiu.lu@intel.com>
+
+ PR binutils/4218
+ * i386-dis.c (PREGRP38): New.
+ (dis386): Use PREGRP38 for 0x90.
+ (prefix_user_table): Add PREGRP38.
+ (print_insn): Set uses_REPZ_prefix to 1 for pause.
+ (NOP_Fixup1): Properly handle REX bits.
+ (NOP_Fixup2): Likewise.
+
+ * i386-opc.c (i386_optab): Allow %eax with xchg in 64bit.
+ Allow register with nop.
+
+2007-03-20 DJ Delorie <dj@redhat.com>
+
+ * m32c-asm.c: Regenerate.
+ * m32c-desc.c: Regenerate.
+ * m32c-desc.h: Regenerate.
+ * m32c-dis.h: Regenerate.
+ * m32c-ibld.c: Regenerate.
+ * m32c-opc.c: Regenerate.
+ * m32c-opc.h: Regenerate.
+
+2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-opc.c: Include "libiberty.h".
+ (i386_regtab): Remove the last entry.
+ (i386_regtab_size): New.
+ (i386_float_regtab_size): Likewise.
+
+ * i386-opc.h (i386_regtab_size): New.
+ (i386_float_regtab_size): Likewise.
+
+2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
+
+ * Makefile.am (CFILES): Add i386-opc.c.
+ (ALL_MACHINES): Add i386-opc.lo.
+ Run "make dep-am".
+ * Makefile.in: Regenerated.
+
+ * configure.in: Add i386-opc.lo for bfd_i386_arch.
+ * configure: Regenerated.
+
+ * i386-dis.c: Include "opcode/i386.h".
+ (MAXLEN): Renamed to MAX_MNEM_SIZE. Remove definition.
+ (FWAIT_OPCODE): Remove definition.
+ (UNIXWARE_COMPAT): Renamed to SYSV386_COMPAT. Remove definition.
+ (MAX_OPERANDS): Remove definition.
+
+ * i386-opc.c: New file.
+ * i386-opc.h: Likewise.
+
+2007-03-15 H.J. Lu <hongjiu.lu@intel.com>
+
+ * Makefile.in: Regenerated.
+
+2007-03-09 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (OP_Rd): Renamed to ...
+ (OP_R): This.
+ (Rd): Updated.
+ (Rm): Likewise.
+
+2007-03-08 Alan Modra <amodra@bigpond.net.au>
+
+ * fr30-asm.c: Regenerate.
+ * frv-asm.c: Regenerate.
+ * ip2k-asm.c: Regenerate.
+ * iq2000-asm.c: Regenerate.
+ * m32c-asm.c: Regenerate.
+ * m32r-asm.c: Regenerate.
+ * m32r-dis.c: Regenerate.
+ * mt-asm.c: Regenerate.
+ * mt-ibld.c: Regenerate.
+ * mt-opc.c: Regenerate.
+ * openrisc-asm.c: Regenerate.
+ * xc16x-asm.c: Regenerate.
+ * xstormy16-asm.c: Regenerate.
+
+ * Makefile.am: Run "make dep-am".
+ * Makefile.in: Regenerate.
+ * po/POTFILES.in: Regenerate.
+
+2007-03-06 Andreas Krebbel <krebbel1@de.ibm.com>
+
+ * opcodes/s390-opc.c (INSTR_RRE_FR, INSTR_RRF_F0FF2, INSTR_RRF_F0FR,
+ INSTR_RRF_UUFF, INSTR_RRF_0UFF, INSTR_RRF_FFFU, INSTR_RRR_F0FF): New
+ instruction formats added.
+ (MASK_RRE_FR, MASK_RRF_F0FF2, MASK_RRF_F0FR, MASK_RRF_UUFF,
+ MASK_RRF_0UFF, MASK_RRF_FFFU, MASK_RRR_F0FF): New instruction format
+ masks added.
+ * opcodes/s390-opc.txt (lpdfr - tgxt): Decimal floating point
+ instructions added.
+ * opcodes/s390-mkopc.c (s390_opcode_cpu_val): S390_OPCODE_Z9_EC added.
+ (main): z9-ec cpu type option added.
+ * include/opcode/s390.h (s390_opcode_cpu_val): S390_OPCODE_Z9_EC added.
+
+2007-02-22 DJ Delorie <dj@redhat.com>
+
+ * s390-opc.c (INSTR_SS_L2RDRD): New.
+ (MASK_SS_L2RDRD): New.
+ * s390-opc.txt (pka): Use it.
+
+2007-02-20 Thiemo Seufer <ths@mips.com>
+ Chao-Ying Fu <fu@mips.com>
+
+ * mips-dis.c (mips_arch_choices): Add DSP R2 support.
+ (print_insn_args): Add support for balign instruction.
+ * mips-opc.c (D33): New shortcut for DSP R2 instructions.
+ (mips_builtin_opcodes): Add DSP R2 instructions.
+
+2007-02-19 Andreas Krebbel <krebbel1@de.ibm.com>
+
+ * s390-opc.c (INSTR_RRF_U0FR, MASK_RRF_U0FR): Removed.
+ (INSTR_RRF_U0RF, MASK_RRF_U0RF): Added.
+ * s390-opc.txt (cfxbr, cfdbr, cfebr, cgebr, cgdbr, cgxbr, cger, cgdr,
+ cgxr, cfxr, cfdr, cfer): Instruction type set to INSTR_RRF_U0RF.
+
+2007-02-19 Andreas Krebbel <krebbel1@de.ibm.com>
+
+ * s390-opc.txt ("efpc", "sfpc"): Set to RRE_RR_OPT instruction type.
+ * s390-opc.c (s390_operands): Add RO_28 as optional gpr.
+ (INSTR_RRE_RR_OPT, MASK_RRE_RR_OPT): New instruction type for efpc
+ and sfpc.
+
+2007-02-16 Nick Clifton <nickc@redhat.com>
+
+ PR binutils/4045
+ * avr-dis.c (comment_start): New variable, contains the prefix to
+ use when printing addresses in comments.
+ (print_insn_avr): Set comment_start to an empty space if there is
+ no symbol table available as the generic address printing code
+ will prefix the numeric value of the address with 0x.
+
+2007-02-13 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c: Updated to use an array of MAX_OPERANDS operands
+ in struct dis386.
+
+2007-02-05 Dave Brolley <brolley@redhat.com>
+ Richard Sandiford <rsandifo@redhat.com>
+ DJ Delorie <dj@redhat.com>
+ Graydon Hoare <graydon@redhat.com>
+ Frank Ch. Eigler <fche@redhat.com>
+ Ben Elliston <bje@redhat.com>
+
+ * Makefile.am (HFILES): Add mep-desc.h mep-opc.h.
+ (CFILES): Add mep-*.c
+ (ALL_MACHINES): Add mep-*.lo.
+ (CLEANFILES): Add stamp-mep.
+ (CGEN_CPUS): Add mep.
+ (MEP_DEPS): New variable.
+ (mep-*): New targets.
+ * configure.in: Handle bfd_mep_arch.
+ * disassemble.c (ARCH_mep): New macro.
+ (disassembler): Handle bfd_arch_mep.
+ (disassemble_init_for_target): Likewise.
+ * mep-*: New files for Toshiba Media Processor (MeP).
+ * Makefile.in: Regenerated.
+ * configure: Regenerated.
+
+2007-02-05 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (OP_J): Undo the last change. Properly handle 64K
+ wrap around within the same segment in 16bit mode.
+
+2007-02-02 H.J. Lu <hongjiu.lu@intel.com>
+
+ * i386-dis.c (OP_J): Mask to 16bit only if there is a data16
+ prefix.
+
+2007-02-02 H.J. Lu <hongjiu.lu@intel.com>
+
+ * avr-dis.c (avr_operand): Correct PR number in comment.
+
+2007-02-02 H.J. Lu <hongjiu.lu@intel.com>
* disassemble.c (disassembler_usage): Call
print_i386_disassembler_options for i386 disassembler.