Daily bump.

[pf3gnuchains/gcc-fork.git] / libstdc++-v3 / Makefile.in

diff --git a/libstdc++-v3/Makefile.in b/libstdc++-v3/Makefile.in
index e99995f..a25d559 100644 (file)
--- a/libstdc++-v3/Makefile.in
+++ b/libstdc++-v3/Makefile.in
@@ -1,4 +1,4 @@
-# Makefile.in generated by automake 1.8.5 from Makefile.am.
+# Makefile.in generated by automake 1.9.1 from Makefile.am.
 # @configure_input@
 
 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
@@ -75,7 +75,7 @@ RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
        uninstall-recursive
 ETAGS = etags
 CTAGS = ctags
-DIST_SUBDIRS = include libmath libsupc++ src po testsuite
+DIST_SUBDIRS = include libsupc++ libmath src po testsuite
 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
@@ -198,6 +198,8 @@ ac_ct_CXX = @ac_ct_CXX@
 ac_ct_RANLIB = @ac_ct_RANLIB@
 ac_ct_STRIP = @ac_ct_STRIP@
 am__leading_dot = @am__leading_dot@
+am__tar = @am__tar@
+am__untar = @am__untar@
 baseline_dir = @baseline_dir@
 bindir = @bindir@
 build = @build@
@@ -267,8 +269,8 @@ WARN_CXXFLAGS = \
 
 # -I/-D flags to pass when compiling.
 AM_CPPFLAGS = $(GLIBCXX_INCLUDES)
-@GLIBCXX_HOSTED_TRUE@hosted_source = src po
-SUBDIRS = include libmath libsupc++ $(hosted_source) testsuite
+@GLIBCXX_HOSTED_TRUE@hosted_source = libmath src po testsuite
+SUBDIRS = include libsupc++ $(hosted_source)
 
 # Multilib support.
 MAKEOVERRIDES = 
@@ -387,19 +389,22 @@ clean-libtool:
 distclean-libtool:
        -rm -f libtool
 
+# GNU Make needs to see an explicit $(MAKE) variable in the command it
+# runs to enable its job server during parallel builds.  Hence the
+# comments below.
 all-multi:
-       $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do
+       $(MULTIDO) $(AM_MAKEFLAGS) DO=all multi-do # $(MAKE)
 install-multi:
-       $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do
+       $(MULTIDO) $(AM_MAKEFLAGS) DO=install multi-do # $(MAKE)
 
 mostlyclean-multi:
-       $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean
+       $(MULTICLEAN) $(AM_MAKEFLAGS) DO=mostlyclean multi-clean # $(MAKE)
 clean-multi:
-       $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean
+       $(MULTICLEAN) $(AM_MAKEFLAGS) DO=clean multi-clean # $(MAKE)
 distclean-multi:
-       $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean
+       $(MULTICLEAN) $(AM_MAKEFLAGS) DO=distclean multi-clean # $(MAKE)
 maintainer-clean-multi:
-       $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean
+       $(MULTICLEAN) $(AM_MAKEFLAGS) DO=maintainer-clean multi-clean # $(MAKE)
 uninstall-info-am:
 
 # This directory's subdirectories are mostly independent; you can cd
@@ -526,12 +531,14 @@ distdir: $(DISTFILES)
        list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
          if test "$$subdir" = .; then :; else \
            test -d "$(distdir)/$$subdir" \
-           || mkdir "$(distdir)/$$subdir" \
+           || $(mkdir_p) "$(distdir)/$$subdir" \
            || exit 1; \
+           distdir=`$(am__cd) $(distdir) && pwd`; \
+           top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
            (cd $$subdir && \
              $(MAKE) $(AM_MAKEFLAGS) \
-               top_distdir="../$(top_distdir)" \
-               distdir="../$(distdir)/$$subdir" \
+               top_distdir="$$top_distdir" \
+               distdir="$$distdir/$$subdir" \
                distdir) \
              || exit 1; \
          fi; \
@@ -542,15 +549,15 @@ distdir: $(DISTFILES)
          ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
        || chmod -R a+r $(distdir)
 dist-gzip: distdir
-       $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+       tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
        $(am__remove_distdir)
 
 dist-bzip2: distdir
-       $(AMTAR) chof - $(distdir) | bzip2 -9 -c >$(distdir).tar.bz2
+       tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
        $(am__remove_distdir)
 
 dist-tarZ: distdir
-       $(AMTAR) chof - $(distdir) | compress -c >$(distdir).tar.Z
+       tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
        $(am__remove_distdir)
 
 dist-shar: distdir
@@ -563,7 +570,7 @@ dist-zip: distdir
        $(am__remove_distdir)
 
 dist dist-all: distdir
-       $(AMTAR) chof - $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
+       tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
        $(am__remove_distdir)
 
 # This target untars the dist file and tries a VPATH configuration.  Then
@@ -572,11 +579,11 @@ dist dist-all: distdir
 distcheck: dist
        case '$(DIST_ARCHIVES)' in \
        *.tar.gz*) \
-         GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - ;;\
+         GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
        *.tar.bz2*) \
-         bunzip2 -c $(distdir).tar.bz2 | $(AMTAR) xf - ;;\
+         bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
        *.tar.Z*) \
-         uncompress -c $(distdir).tar.Z | $(AMTAR) xf - ;;\
+         uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
        *.shar.gz*) \
          GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
        *.zip*) \
@@ -657,7 +664,7 @@ mostlyclean-generic:
 clean-generic:
 
 distclean-generic:
-       -rm -f $(CONFIG_CLEAN_FILES)
+       -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 
 maintainer-clean-generic:
        @echo "This command is intended for maintainers to use"
@@ -732,8 +739,6 @@ uninstall-info: uninstall-info-recursive
        uninstall uninstall-am uninstall-info-am
 
 
-@GLIBCXX_HOSTED_TRUE@  # Possibly libmath as well...
-
 # These rules are messy, but are hella worth it.
 doxygen:
        -(srcdir=`cd ${top_srcdir}; ${PWD_COMMAND}`; \