--disable-getenv-properties
don't set system properties from GCJ_PROPERTIES"
ac_help="$ac_help
+ --enable-hash-synchronization
+ Use global hash table for monitor locks"
+ac_help="$ac_help
--enable-libgcj-debug enable runtime debugging code"
ac_help="$ac_help
--enable-interpreter enable interpreter"
ac_help="$ac_help
--disable-java-net disable java.net"
ac_help="$ac_help
+ --without-libffi don't use libffi"
+ac_help="$ac_help
--disable-jvmpi disable JVMPI support"
ac_help="$ac_help
--with-ecos enable runtime eCos target support"
ac_help="$ac_help
--enable-java-gc=TYPE choose garbage collector [boehm]"
ac_help="$ac_help
+ --with-libiconv-prefix=DIR search for libiconv in DIR/include and DIR/lib"
+ac_help="$ac_help
--with-x use the X Window System"
ac_help="$ac_help
--enable-java-awt list of AWT peer implementations to be built"
-ac_aux_dir=
-for ac_dir in .. $srcdir/..; do
- if test -f $ac_dir/install-sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install-sh -c"
- break
- elif test -f $ac_dir/install.sh; then
- ac_aux_dir=$ac_dir
- ac_install_sh="$ac_aux_dir/install.sh -c"
- break
- fi
-done
-if test -z "$ac_aux_dir"; then
- { echo "configure: error: can not find install-sh or install.sh in .. $srcdir/.." 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-
-
-# Do some error checking and defaulting for the host and target type.
-# The inputs are:
-# configure --host=HOST --target=TARGET --build=BUILD NONOPT
-#
-# The rules are:
-# 1. You are not allowed to specify --host, --target, and nonopt at the
-# same time.
-# 2. Host defaults to nonopt.
-# 3. If nonopt is not specified, then host defaults to the current host,
-# as determined by config.guess.
-# 4. Target and build default to nonopt.
-# 5. If nonopt is not specified, then target and build default to host.
-
-# The aliases save the names the user supplied, while $host etc.
-# will get canonicalized.
-case $host---$target---$nonopt in
-NONE---*---* | *---NONE---* | *---*---NONE) ;;
-*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
-esac
-
-
-# Make sure we can run config.sub.
-if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
-else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
-fi
-
-echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:632: checking host system type" >&5
-
-host_alias=$host
-case "$host_alias" in
-NONE)
- case $nonopt in
- NONE)
- if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
- else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
- fi ;;
- *) host_alias=$nonopt ;;
- esac ;;
-esac
-
-host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
-host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$host" 1>&6
-
-echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:653: checking target system type" >&5
-
-target_alias=$target
-case "$target_alias" in
-NONE)
- case $nonopt in
- NONE) target_alias=$host_alias ;;
- *) target_alias=$nonopt ;;
- esac ;;
-esac
-
-target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
-target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$target" 1>&6
-
-echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:671: checking build system type" >&5
-
-build_alias=$build
-case "$build_alias" in
-NONE)
- case $nonopt in
- NONE) build_alias=$host_alias ;;
- *) build_alias=$nonopt ;;
- esac ;;
-esac
-
-build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
-build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
-build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
-build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
-echo "$ac_t""$build" 1>&6
-
-test "$host_alias" != "$target_alias" &&
- test "$program_prefix$program_suffix$program_transform_name" = \
- NONENONEs,x,x, &&
- program_prefix=${target_alias}-
-
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:694: checking whether ln -s works" >&5
+echo "configure:592: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:740: checking for a BSD compatible install" >&5
+echo "configure:638: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:793: checking whether build environment is sane" >&5
+echo "configure:691: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:850: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:748: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
fi
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:883: checking for Cygwin environment" >&5
+echo "configure:781: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 888 "configure"
+#line 786 "configure"
#include "confdefs.h"
int main() {
return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:899: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:797: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:916: checking for mingw32 environment" >&5
+echo "configure:814: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 921 "configure"
+#line 819 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:928: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:826: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
fi
+# When building with srcdir == objdir, links to the source files will
+# be created in directories within the target_subdir. We have to
+# adjust toplevel_srcdir accordingly, so that configure finds
+# install-sh and other auxiliary files that live in the top-level
+# source directory.
if test "${srcdir}" = "."; then
- if test "${with_target_subdir}" != "."; then
- libgcj_basedir="${srcdir}/${with_multisrctop}../."
+ if test -z "${with_target_subdir}"; then
+ toprel=".."
else
- libgcj_basedir="${srcdir}/${with_multisrctop}."
+ if test "${with_target_subdir}" != "."; then
+ toprel="${with_multisrctop}../.."
+ else
+ toprel="${with_multisrctop}.."
+ fi
fi
else
- libgcj_basedir="${srcdir}/."
+ toprel=".."
fi
+libgcj_basedir=$srcdir/$toprel/./libjava
+
+
+ac_aux_dir=
+for ac_dir in ${srcdir}/$toprel $srcdir/${srcdir}/$toprel; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { echo "configure: error: can not find install-sh or install.sh in ${srcdir}/$toprel $srcdir/${srcdir}/$toprel" 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+if :; then :; else
+ # This overrides the previous occurrence for automake, but not for
+ # autoconf, which is exactly what we want.
+ ac_aux_dir=
+for ac_dir in .. $srcdir/..; do
+ if test -f $ac_dir/install-sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install-sh -c"
+ break
+ elif test -f $ac_dir/install.sh; then
+ ac_aux_dir=$ac_dir
+ ac_install_sh="$ac_aux_dir/install.sh -c"
+ break
+ fi
+done
+if test -z "$ac_aux_dir"; then
+ { echo "configure: error: can not find install-sh or install.sh in .. $srcdir/.." 1>&2; exit 1; }
+fi
+ac_config_guess=$ac_aux_dir/config.guess
+ac_config_sub=$ac_aux_dir/config.sub
+ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
+
+fi
+
+# This works around an automake problem.
+mkinstalldirs="`cd $ac_aux_dir && pwd`/mkinstalldirs"
+
+
+
+# Do some error checking and defaulting for the host and target type.
+# The inputs are:
+# configure --host=HOST --target=TARGET --build=BUILD NONOPT
+#
+# The rules are:
+# 1. You are not allowed to specify --host, --target, and nonopt at the
+# same time.
+# 2. Host defaults to nonopt.
+# 3. If nonopt is not specified, then host defaults to the current host,
+# as determined by config.guess.
+# 4. Target and build default to nonopt.
+# 5. If nonopt is not specified, then target and build default to host.
+
+# The aliases save the names the user supplied, while $host etc.
+# will get canonicalized.
+case $host---$target---$nonopt in
+NONE---*---* | *---NONE---* | *---*---NONE) ;;
+*) { echo "configure: error: can only configure for one host and one target at a time" 1>&2; exit 1; } ;;
+esac
# Make sure we can run config.sub.
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:976: checking host system type" >&5
+echo "configure:953: checking host system type" >&5
host_alias=$host
case "$host_alias" in
host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
echo "$ac_t""$host" 1>&6
+echo $ac_n "checking target system type""... $ac_c" 1>&6
+echo "configure:974: checking target system type" >&5
+
+target_alias=$target
+case "$target_alias" in
+NONE)
+ case $nonopt in
+ NONE) target_alias=$host_alias ;;
+ *) target_alias=$nonopt ;;
+ esac ;;
+esac
+
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
+target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$target" 1>&6
+
+echo $ac_n "checking build system type""... $ac_c" 1>&6
+echo "configure:992: checking build system type" >&5
+
+build_alias=$build
+case "$build_alias" in
+NONE)
+ case $nonopt in
+ NONE) build_alias=$host_alias ;;
+ *) build_alias=$nonopt ;;
+ esac ;;
+esac
+
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
+build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
+build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
+build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
+echo "$ac_t""$build" 1>&6
+
+test "$host_alias" != "$target_alias" &&
+ test "$program_prefix$program_suffix$program_transform_name" = \
+ NONENONEs,x,x, &&
+ program_prefix=${target_alias}-
+
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1003: checking for $ac_word" >&5
+echo "configure:1021: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1033: checking for $ac_word" >&5
+echo "configure:1051: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1084: checking for $ac_word" >&5
+echo "configure:1102: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1117: checking whether we are using GNU C" >&5
+echo "configure:1135: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1126: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1144: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1145: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1163: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1181: checking for $ac_word" >&5
+echo "configure:1199: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CXX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:1214: checking whether we are using GNU C++" >&5
+echo "configure:1232: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1223: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1241: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gxx=yes
else
ac_cv_prog_gxx=no
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:1242: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:1260: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1295: checking for working aclocal" >&5
+echo "configure:1313: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1308: checking for working autoconf" >&5
+echo "configure:1326: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1321: checking for working automake" >&5
+echo "configure:1339: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1334: checking for working autoheader" >&5
+echo "configure:1352: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1347: checking for working makeinfo" >&5
+echo "configure:1365: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
# LIBGCJ_CONFIGURE, which doesn't work because that means that it will
# be run before AC_CANONICAL_HOST.
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1366: checking build system type" >&5
+echo "configure:1384: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
set dummy ${ac_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1387: checking for $ac_word" >&5
+echo "configure:1405: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1419: checking for $ac_word" >&5
+echo "configure:1437: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1451: checking for $ac_word" >&5
+echo "configure:1469: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1483: checking for $ac_word" >&5
+echo "configure:1501: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1528: checking for a BSD compatible install" >&5
+echo "configure:1546: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1582: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:1600: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
# automake happy, but we dont execute it, since we dont care about
# the result.
if false; then
+ # autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
+ # to nothing, so nothing would remain between `then' and `fi' if it
+ # were not for the `:' below.
+ :
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1616: checking for executable suffix" >&5
+echo "configure:1638: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:1626: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:1648: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
*.c | *.o | *.obj | *.ilk | *.pdb) ;;
libgcj_cxxflags=
libgcj_javaflags=
-. ${libgcj_basedir}/configure.host
-
-case ${libgcj_basedir} in
-/* | A-Za-z:/\\*) libgcj_flagbasedir=${libgcj_basedir} ;;
-*) libgcj_flagbasedir='$(top_builddir)/'${libgcj_basedir} ;;
-esac
+. ${srcdir}/configure.host
LIBGCJ_CFLAGS="${libgcj_cflags}"
LIBGCJ_CXXFLAGS="${libgcj_cxxflags}"
# Sigh. Libtool's macro doesn't do the right thing.
INCLTDL="-I\$(top_srcdir)/libltdl $INCLTDL"
+ # FIXME: this is a hack.
+ sub_auxdir="`cd $ac_aux_dir && pwd`"
+ ac_configure_args="$ac_configure_args --with-auxdir=$sub_auxdir"
fi
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1779: checking for ld used by GCC" >&5
+echo "configure:1799: checking for ld used by GCC" >&5
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1809: checking for GNU ld" >&5
+echo "configure:1829: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1812: checking for non-GNU ld" >&5
+echo "configure:1832: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1847: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1867: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1864: checking for $LD option to reload object files" >&5
+echo "configure:1884: checking for $LD option to reload object files" >&5
if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$reload_flag" && reload_flag=" $reload_flag"
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1876: checking for BSD-compatible nm" >&5
+echo "configure:1896: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""$NM" 1>&6
echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:1914: checking how to recognise dependant libraries" >&5
+echo "configure:1934: checking how to recognise dependant libraries" >&5
if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# This must be Linux ELF.
linux-gnu*)
case $host_cpu in
- alpha* | i*86 | powerpc* | sparc* | ia64* )
+ alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* )
lt_cv_deplibs_check_method=pass_all ;;
*)
# glibc up to 2.1.1 does not perform some relocations on ARM
lt_cv_file_magic_test_file=/lib/libc.so
;;
+sysv5uw[78]* | sysv4*uw2*)
+ lt_cv_deplibs_check_method=pass_all
+ ;;
+
sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
case $host_vendor in
ncr)
deplibs_check_method=$lt_cv_deplibs_check_method
echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:2074: checking for object suffix" >&5
+echo "configure:2098: checking for object suffix" >&5
if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2080: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2104: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
for ac_file in conftest.*; do
case $ac_file in
*.c) ;;
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2104: checking for ${ac_tool_prefix}file" >&5
+echo "configure:2128: checking for ${ac_tool_prefix}file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2166: checking for file" >&5
+echo "configure:2190: checking for file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2237: checking for $ac_word" >&5
+echo "configure:2261: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2269: checking for $ac_word" >&5
+echo "configure:2293: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2304: checking for $ac_word" >&5
+echo "configure:2328: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2336: checking for $ac_word" >&5
+echo "configure:2360: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case $host in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 2403 "configure"' > conftest.$ac_ext
- if { (eval echo configure:2404: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 2427 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:2428: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -32"
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2425: checking whether the C compiler needs -belf" >&5
+echo "configure:2449: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 2438 "configure"
+#line 2462 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2445: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2469: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
esac
echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
-echo "configure:2475: checking how to run the C++ preprocessor" >&5
+echo "configure:2499: checking how to run the C++ preprocessor" >&5
if test -z "$CXXCPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
CXXCPP="${CXX-g++} -E"
cat > conftest.$ac_ext <<EOF
-#line 2488 "configure"
+#line 2512 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2493: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2517: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
fi
-if test -n "$enable_getenv_properties"; then
+if test -z "$enable_getenv_properties"; then
enable_getenv_properties=${enable_getenv_properties_default-yes}
fi
if test "$enable_getenv_properties" = no; then
fi
+
+# Check whether --enable-hash-synchronization or --disable-hash-synchronization was given.
+if test "${enable_hash_synchronization+set}" = set; then
+ enableval="$enable_hash_synchronization"
+ :
+fi
+
+
+if test -z "$enable_hash_synchronization"; then
+ enable_hash_synchronization=$enable_hash_synchronization_default
+fi
+
+
LIBGCJDEBUG="false"
# Check whether --enable-libgcj-debug or --disable-libgcj-debug was given.
fi
echo $ac_n "checking for exception model to use""... $ac_c" 1>&6
-echo "configure:2710: checking for exception model to use" >&5
+echo "configure:2747: checking for exception model to use" >&5
ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
:
else
cat > conftest.$ac_ext << EOF
-#line 2725 "configure"
+#line 2762 "configure"
struct S { ~S(); };
void bar();
void foo()
EOF
old_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=-S
-if { (eval echo configure:2736: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2773: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if grep _Unwind_SjLj_Resume conftest.s >/dev/null 2>&1 ; then
enable_sjlj_exceptions=yes
elif grep _Unwind_Resume conftest.s >/dev/null 2>&1 ; then
echo "$ac_t""$ac_exception_model_name" 1>&6
-echo $ac_n "checking for data_start""... $ac_c" 1>&6
-echo "configure:2768: checking for data_start" >&5
-LIBDATASTARTSPEC=
-NEEDS_DATA_START=
-cat > conftest.$ac_ext <<EOF
-#line 2772 "configure"
-#include "confdefs.h"
-extern int data_start;
-int main() {
-return ((int) &data_start);
-; return 0; }
-EOF
-if { (eval echo configure:2779: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- echo "$ac_t""found it" 1>&6
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- LIBDATASTARTSPEC="-u data_start libgcjdata.a%s"
- NEEDS_DATA_START=yes
- echo "$ac_t""missing" 1>&6
-fi
-rm -f conftest*
-
-
# Check whether --enable-java-net or --disable-java-net was given.
if test "${enable_java_net+set}" = set; then
enableval="$enable_java_net"
fi
-if test -n "$enable_java_net"; then
+if test -z "$enable_java_net"; then
enable_java_net=${enable_java_net_default-yes}
fi
if test "$enable_java_net" = no; then
fi
+# Check whether --with-libffi or --without-libffi was given.
+if test "${with_libffi+set}" = set; then
+ withval="$with_libffi"
+ :
+else
+ with_libffi=${with_libffi_default-yes}
+fi
+
+
+LIBFFI=
+LIBFFIINCS=
+if test "$with_libffi" != no; then
+ cat >> confdefs.h <<\EOF
+#define USE_LIBFFI 1
+EOF
+
+ LIBFFI=../libffi/libfficonvenience.la
+ LIBFFIINCS='-I$(top_srcdir)/../libffi/include -I$(MULTIBUILDTOP)../libffi/include'
+fi
+
+
+
# Check whether --enable-jvmpi or --disable-jvmpi was given.
if test "${enable_jvmpi+set}" = set; then
enableval="$enable_jvmpi"
esac
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2849: checking how to run the C preprocessor" >&5
+echo "configure:2882: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 2864 "configure"
+#line 2897 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2870: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2903: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 2881 "configure"
+#line 2914 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2887: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2920: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 2898 "configure"
+#line 2931 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2904: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2937: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
cat > conftest.$ac_ext <<EOF
-#line 2929 "configure"
+#line 2962 "configure"
#include "confdefs.h"
#include <stdint.h>
EOF
rm -f conftest*
cat > conftest.$ac_ext <<EOF
-#line 2944 "configure"
+#line 2977 "configure"
#include "confdefs.h"
#include <inttypes.h>
EOF
rm -f conftest*
cat > conftest.$ac_ext <<EOF
-#line 2959 "configure"
+#line 2992 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
rm -f conftest*
cat > conftest.$ac_ext <<EOF
-#line 2974 "configure"
+#line 3007 "configure"
#include "confdefs.h"
#include <sys/config.h>
EOF
cat > conftest.$ac_ext <<EOF
-#line 2991 "configure"
+#line 3024 "configure"
#include "confdefs.h"
#include <time.h>
EOF
rm -f conftest*
cat > conftest.$ac_ext <<EOF
-#line 3006 "configure"
+#line 3039 "configure"
#include "confdefs.h"
#include <time.h>
EOF
libsubdir=.libs
echo $ac_n "checking for garbage collector to use""... $ac_c" 1>&6
-echo "configure:3050: checking for garbage collector to use" >&5
+echo "configure:3083: checking for garbage collector to use" >&5
# Check whether --enable-java-gc or --disable-java-gc was given.
if test "${enable_java_gc+set}" = set; then
enableval="$enable_java_gc"
# We include the path to the boehm-gc build directory.
# See Makefile.am to understand why.
GCLIBS="$GCDEPS -L\$(here)/../boehm-gc/$libsubdir"
- GCINCS='-I$(top_srcdir)/../boehm-gc -I$(top_builddir)/../boehm-gc'
+ GCINCS='-I$(top_srcdir)/../boehm-gc/include'
GCSPEC='-lgcjgc'
JC1GCSPEC='-fuse-boehm-gc'
GCTESTSPEC="-L`pwd`/../boehm-gc/.libs -rpath `pwd`/../boehm-gc/.libs"
echo $ac_n "checking for thread model used by GCC""... $ac_c" 1>&6
-echo "configure:3106: checking for thread model used by GCC" >&5
+echo "configure:3139: checking for thread model used by GCC" >&5
THREADS=`$CC -v 2>&1 | sed -n 's/^Thread model: //p'`
echo "$ac_t""$THREADS" 1>&6
THREADSPEC=
case "$THREADS" in
posix)
- THREADLIBS=-lpthread
- THREADSPEC=-lpthread
+ case "$host" in
+ *-*-cygwin*)
+ # Don't set THREADLIBS here. Cygwin doesn't have -lpthread.
+ ;;
+ *)
+ THREADLIBS=-lpthread
+ THREADSPEC=-lpthread
+ ;;
+ esac
THREADOBJS=posix-threads.lo
THREADH=posix-threads.h
# MIT pthreads doesn't seem to have the mutexattr functions.
+HASH_SYNC_SPEC=
+# Hash synchronization is only useful with posix threads right now.
+if test "$enable_hash_synchronization" = yes && test "$THREADS" = "posix"; then
+ HASH_SYNC_SPEC=-fhash-synchronization
+ cat >> confdefs.h <<\EOF
+#define JV_HASH_SYNCHRONIZATION 1
+EOF
+
+fi
+
+
+
if test "$GCC" = yes; then
NATIVE=yes
# We're in the tree with gcc, and need to include some of its headers.
-GCC_UNWIND_INCLUDE='-I$(top_srcdir)/../gcc'
+GCC_UNWIND_INCLUDE='-I$(libgcj_basedir)/../gcc'
if test -n "${with_cross_host}"; then
# We are being configured with a cross compiler. AC_REPLACE_FUNCS
# If Canadian cross, then don't pick up tools from the build
# directory.
- if test "$build" != "$with_cross_host"; then
+ if test x"$build" != x"$with_cross_host" && x"$build" != x"$target"; then
CANADIAN=yes
GCC_UNWIND_INCLUDE=
GCJ="${target_alias}-gcj"
- else
- GCJ=
fi
NATIVE=no
else
for ac_func in strerror ioctl select fstat open fsync sleep
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3254: checking for $ac_func" >&5
+echo "configure:3304: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3259 "configure"
+#line 3309 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3282: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3332: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in gmtime_r localtime_r readdir_r getpwuid_r getcwd
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3309: checking for $ac_func" >&5
+echo "configure:3359: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3314 "configure"
+#line 3364 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3337: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3387: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in access stat mkdir rename rmdir unlink realpath utime chmod
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3364: checking for $ac_func" >&5
+echo "configure:3414: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3369 "configure"
+#line 3419 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3392: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3442: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
done
- for ac_func in iconv nl_langinfo setlocale
+ for ac_func in nl_langinfo setlocale
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3419: checking for $ac_func" >&5
+echo "configure:3469: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3424 "configure"
+#line 3474 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3447: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3497: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in inet_aton inet_addr
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3474: checking for $ac_func" >&5
+echo "configure:3524: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3479 "configure"
+#line 3529 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3502: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3552: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in inet_pton uname inet_ntoa
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3529: checking for $ac_func" >&5
+echo "configure:3579: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3534 "configure"
+#line 3584 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3557: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3607: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
done
- for ac_func in backtrace fork execvp pipe
+ for ac_func in backtrace fork execvp pipe sigaction
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3584: checking for $ac_func" >&5
+echo "configure:3634: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3589 "configure"
+#line 3639 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3612: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3662: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3640: checking for $ac_hdr" >&5
+echo "configure:3690: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3645 "configure"
+#line 3695 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3650: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3700: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
done
echo $ac_n "checking for dladdr in -ldl""... $ac_c" 1>&6
-echo "configure:3677: checking for dladdr in -ldl" >&5
+echo "configure:3727: checking for dladdr in -ldl" >&5
ac_lib_var=`echo dl'_'dladdr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3685 "configure"
+#line 3735 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dladdr()
; return 0; }
EOF
-if { (eval echo configure:3696: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3746: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
ac_safe=`echo "$ac_file" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_file""... $ac_c" 1>&6
-echo "configure:3725: checking for $ac_file" >&5
+echo "configure:3775: checking for $ac_file" >&5
if eval "test \"`echo '$''{'ac_cv_file_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
done
+
+
+ # Check whether --with-libiconv-prefix or --without-libiconv-prefix was given.
+if test "${with_libiconv_prefix+set}" = set; then
+ withval="$with_libiconv_prefix"
+
+ for dir in `echo "$withval" | tr : ' '`; do
+ if test -d $dir/include; then CPPFLAGS="$CPPFLAGS -I$dir/include"; fi
+ if test -d $dir/lib; then LDFLAGS="$LDFLAGS -L$dir/lib"; fi
+ done
+
+fi
+
+
+ echo $ac_n "checking for iconv""... $ac_c" 1>&6
+echo "configure:3822: checking for iconv" >&5
+if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ am_cv_func_iconv="no, consider installing GNU libiconv"
+ am_cv_lib_iconv=no
+ cat > conftest.$ac_ext <<EOF
+#line 3830 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+#include <iconv.h>
+int main() {
+iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);
+; return 0; }
+EOF
+if { (eval echo configure:3840: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ am_cv_func_iconv=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+ if test "$am_cv_func_iconv" != yes; then
+ am_save_LIBS="$LIBS"
+ LIBS="$LIBS -liconv"
+ cat > conftest.$ac_ext <<EOF
+#line 3852 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+#include <iconv.h>
+int main() {
+iconv_t cd = iconv_open("","");
+ iconv(cd,NULL,NULL,NULL,NULL);
+ iconv_close(cd);
+; return 0; }
+EOF
+if { (eval echo configure:3862: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ am_cv_lib_iconv=yes
+ am_cv_func_iconv=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+ LIBS="$am_save_LIBS"
+ fi
+
+fi
+
+echo "$ac_t""$am_cv_func_iconv" 1>&6
+ if test "$am_cv_func_iconv" = yes; then
+ cat >> confdefs.h <<\EOF
+#define HAVE_ICONV 1
+EOF
+
+ echo $ac_n "checking for iconv declaration""... $ac_c" 1>&6
+echo "configure:3883: checking for iconv declaration" >&5
+ if eval "test \"`echo '$''{'am_cv_proto_iconv'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+
+ cat > conftest.$ac_ext <<EOF
+#line 3889 "configure"
+#include "confdefs.h"
+
+#include <stdlib.h>
+#include <iconv.h>
+extern
+#ifdef __cplusplus
+"C"
+#endif
+#if defined(__STDC__) || defined(__cplusplus)
+size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
+#else
+size_t iconv();
+#endif
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:3908: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ am_cv_proto_iconv_arg1=""
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ am_cv_proto_iconv_arg1="const"
+fi
+rm -f conftest*
+ am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"
+fi
+
+ am_cv_proto_iconv=`echo "$am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
+ echo "$ac_t""${ac_t:-
+ }$am_cv_proto_iconv" 1>&6
+ cat >> confdefs.h <<EOF
+#define ICONV_CONST $am_cv_proto_iconv_arg1
+EOF
+
+ fi
+ LIBICONV=
+ if test "$am_cv_lib_iconv" = yes; then
+ LIBICONV="-liconv"
+ fi
+
+
+
for ac_func in gethostbyname_r
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3760: checking for $ac_func" >&5
+echo "configure:3939: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3765 "configure"
+#line 3944 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3788: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3967: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# We look for the one that returns `int'.
# Hopefully this check is robust enough.
cat > conftest.$ac_ext <<EOF
-#line 3815 "configure"
+#line 3994 "configure"
#include "confdefs.h"
#include <netdb.h>
EOF
*" -D_REENTRANT "*) ;;
*)
echo $ac_n "checking whether gethostbyname_r declaration requires -D_REENTRANT""... $ac_c" 1>&6
-echo "configure:3835: checking whether gethostbyname_r declaration requires -D_REENTRANT" >&5
+echo "configure:4014: checking whether gethostbyname_r declaration requires -D_REENTRANT" >&5
if eval "test \"`echo '$''{'libjava_cv_gethostbyname_r_needs_reentrant'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cross_compiling=$ac_cv_prog_cxx_cross
cat > conftest.$ac_ext <<EOF
-#line 3848 "configure"
+#line 4027 "configure"
#include "confdefs.h"
#include <netdb.h>
int main() {
gethostbyname_r("", 0, 0);
; return 0; }
EOF
-if { (eval echo configure:3855: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4034: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
libjava_cv_gethostbyname_r_needs_reentrant=no
else
CPPFLAGS_SAVE="$CPPFLAGS"
CPPFLAGS="$CPPFLAGS -D_REENTRANT"
cat > conftest.$ac_ext <<EOF
-#line 3865 "configure"
+#line 4044 "configure"
#include "confdefs.h"
#include <netdb.h>
int main() {
gethostbyname_r("", 0, 0);
; return 0; }
EOF
-if { (eval echo configure:3872: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4051: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
libjava_cv_gethostbyname_r_needs_reentrant=yes
else
esac
echo $ac_n "checking for struct hostent_data""... $ac_c" 1>&6
-echo "configure:3907: checking for struct hostent_data" >&5
+echo "configure:4086: checking for struct hostent_data" >&5
if eval "test \"`echo '$''{'libjava_cv_struct_hostent_data'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3912 "configure"
+#line 4091 "configure"
#include "confdefs.h"
#if GETHOSTBYNAME_R_NEEDS_REENTRANT && !defined(_REENTRANT)
struct hostent_data data;
; return 0; }
EOF
-if { (eval echo configure:3923: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4102: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
libjava_cv_struct_hostent_data=yes
else
for ac_func in gethostbyaddr_r
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3952: checking for $ac_func" >&5
+echo "configure:4131: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3957 "configure"
+#line 4136 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3980: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4159: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# We look for the one that returns `int'.
# Hopefully this check is robust enough.
cat > conftest.$ac_ext <<EOF
-#line 4007 "configure"
+#line 4186 "configure"
#include "confdefs.h"
#include <netdb.h>
EOF
for ac_func in gethostname
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4031: checking for $ac_func" >&5
+echo "configure:4210: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4036 "configure"
+#line 4215 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4059: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4238: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
EOF
cat > conftest.$ac_ext <<EOF
-#line 4083 "configure"
+#line 4262 "configure"
#include "confdefs.h"
#include <unistd.h>
EOF
for ac_func in pthread_mutexattr_settype pthread_mutexattr_setkind_np
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4114: checking for $ac_func" >&5
+echo "configure:4293: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4119 "configure"
+#line 4298 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4142: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4321: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in sched_yield
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4172: checking for $ac_func" >&5
+echo "configure:4351: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4177 "configure"
+#line 4356 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4200: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4379: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for sched_yield in -lrt""... $ac_c" 1>&6
-echo "configure:4222: checking for sched_yield in -lrt" >&5
+echo "configure:4401: checking for sched_yield in -lrt" >&5
ac_lib_var=`echo rt'_'sched_yield | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lrt $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4230 "configure"
+#line 4409 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sched_yield()
; return 0; }
EOF
-if { (eval echo configure:4241: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4420: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for sched_yield in -lposix4""... $ac_c" 1>&6
-echo "configure:4267: checking for sched_yield in -lposix4" >&5
+echo "configure:4446: checking for sched_yield in -lposix4" >&5
ac_lib_var=`echo posix4'_'sched_yield | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix4 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4275 "configure"
+#line 4454 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sched_yield()
; return 0; }
EOF
-if { (eval echo configure:4286: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4465: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# We can save a little space at runtime if the mutex has m_count
# or __m_count. This is a nice hack for Linux.
cat > conftest.$ac_ext <<EOF
-#line 4322 "configure"
+#line 4501 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:4331: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4510: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define PTHREAD_MUTEX_HAVE_M_COUNT 1
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 4343 "configure"
+#line 4522 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:4352: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4531: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define PTHREAD_MUTEX_HAVE___M_COUNT 1
for ac_func in gettimeofday time ftime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4372: checking for $ac_func" >&5
+echo "configure:4551: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4377 "configure"
+#line 4556 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4400: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4579: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in memmove
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4431: checking for $ac_func" >&5
+echo "configure:4610: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4436 "configure"
+#line 4615 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4459: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4638: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in memcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4489: checking for $ac_func" >&5
+echo "configure:4668: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4494 "configure"
+#line 4673 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4517: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4696: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
{ echo "configure: error: memcpy is required" 1>&2; exit 1; }
fi
+ echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
+echo "configure:4725: checking for dlopen in -ldl" >&5
+ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
+if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ ac_save_LIBS="$LIBS"
+LIBS="-ldl $LIBS"
+cat > conftest.$ac_ext <<EOF
+#line 4733 "configure"
+#include "confdefs.h"
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char dlopen();
+
+int main() {
+dlopen()
+; return 0; }
+EOF
+if { (eval echo configure:4744: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_lib_$ac_lib_var=no"
+fi
+rm -f conftest*
+LIBS="$ac_save_LIBS"
+
+fi
+if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ cat >> confdefs.h <<\EOF
+#define HAVE_DLOPEN 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
# Some library-finding code we stole from Tcl.
#--------------------------------------------------------------------
# Check for the existence of the -lsocket and -lnsl libraries.
#--------------------------------------------------------------------
echo $ac_n "checking for socket libraries""... $ac_c" 1>&6
-echo "configure:4565: checking for socket libraries" >&5
+echo "configure:4788: checking for socket libraries" >&5
if eval "test \"`echo '$''{'gcj_cv_lib_sockets'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcj_checkBoth=0
unset ac_cv_func_connect
echo $ac_n "checking for connect""... $ac_c" 1>&6
-echo "configure:4573: checking for connect" >&5
+echo "configure:4796: checking for connect" >&5
if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4578 "configure"
+#line 4801 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char connect(); below. */
; return 0; }
EOF
-if { (eval echo configure:4601: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4824: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_connect=yes"
else
if test "$gcj_checkSocket" = 1; then
unset ac_cv_func_connect
echo $ac_n "checking for main in -lsocket""... $ac_c" 1>&6
-echo "configure:4624: checking for main in -lsocket" >&5
+echo "configure:4847: checking for main in -lsocket" >&5
ac_lib_var=`echo socket'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4632 "configure"
+#line 4855 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:4639: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4862: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
LIBS="$LIBS -lsocket -lnsl"
unset ac_cv_func_accept
echo $ac_n "checking for accept""... $ac_c" 1>&6
-echo "configure:4666: checking for accept" >&5
+echo "configure:4889: checking for accept" >&5
if eval "test \"`echo '$''{'ac_cv_func_accept'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4671 "configure"
+#line 4894 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char accept(); below. */
; return 0; }
EOF
-if { (eval echo configure:4694: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4917: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_accept=yes"
else
gcj_oldLibs=$LIBS
LIBS="$LIBS $gcj_cv_lib_sockets"
echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:4721: checking for gethostbyname" >&5
+echo "configure:4944: checking for gethostbyname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4726 "configure"
+#line 4949 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname(); below. */
; return 0; }
EOF
-if { (eval echo configure:4749: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4972: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for main in -lnsl""... $ac_c" 1>&6
-echo "configure:4767: checking for main in -lnsl" >&5
+echo "configure:4990: checking for main in -lnsl" >&5
ac_lib_var=`echo nsl'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4775 "configure"
+#line 4998 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:4782: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5005: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$with_system_zlib" = yes; then
echo $ac_n "checking for deflate in -lz""... $ac_c" 1>&6
-echo "configure:4814: checking for deflate in -lz" >&5
+echo "configure:5037: checking for deflate in -lz" >&5
ac_lib_var=`echo z'_'deflate | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lz $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4822 "configure"
+#line 5045 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
deflate()
; return 0; }
EOF
-if { (eval echo configure:4833: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5056: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# requires -ldl.
if test "$GC" = boehm; then
echo $ac_n "checking for main in -ldl""... $ac_c" 1>&6
-echo "configure:4863: checking for main in -ldl" >&5
+echo "configure:5086: checking for main in -ldl" >&5
ac_lib_var=`echo dl'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4871 "configure"
+#line 5094 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:4878: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5101: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# Extract the first word of "${ac_tool_prefix}gcj", so it can be a program name with args.
set dummy ${ac_tool_prefix}gcj; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4944: checking for $ac_word" >&5
+echo "configure:5167: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCJ'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gcj", so it can be a program name with args.
set dummy gcj; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:4976: checking for $ac_word" >&5
+echo "configure:5199: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCJ'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
CPPFLAGS=$GCJ_SAVE_CPPFLAGS
echo $ac_n "checking size of void *""... $ac_c" 1>&6
-echo "configure:5038: checking size of void *" >&5
+echo "configure:5261: checking size of void *" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_void_p'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 5046 "configure"
+#line 5269 "configure"
#include "confdefs.h"
#include <stdio.h>
main()
exit(0);
}
EOF
-if { (eval echo configure:5057: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5280: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_sizeof_void_p=`cat conftestval`
else
+
if test "$CANADIAN" = yes; then
CANADIAN_TRUE=
CANADIAN_FALSE='#'
echo $ac_n "checking for g++ -ffloat-store bug""... $ac_c" 1>&6
-echo "configure:5154: checking for g++ -ffloat-store bug" >&5
+echo "configure:5378: checking for g++ -ffloat-store bug" >&5
save_CFLAGS="$CFLAGS"
CFLAGS="-x c++ -O2 -ffloat-store"
cat > conftest.$ac_ext <<EOF
-#line 5158 "configure"
+#line 5382 "configure"
#include "confdefs.h"
#include <math.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:5165: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5389: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""no" 1>&6
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5185: checking for $ac_hdr" >&5
+echo "configure:5409: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5190 "configure"
+#line 5414 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5195: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5419: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5225: checking for $ac_hdr" >&5
+echo "configure:5449: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5230 "configure"
+#line 5454 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5235: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5459: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:5263: checking for ANSI C header files" >&5
+echo "configure:5487: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5268 "configure"
+#line 5492 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5276: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5500: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 5293 "configure"
+#line 5517 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 5311 "configure"
+#line 5535 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 5332 "configure"
+#line 5556 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:5343: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5567: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for ssize_t""... $ac_c" 1>&6
-echo "configure:5367: checking for ssize_t" >&5
+echo "configure:5591: checking for ssize_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5372 "configure"
+#line 5596 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
echo $ac_n "checking for in_addr_t""... $ac_c" 1>&6
-echo "configure:5401: checking for in_addr_t" >&5
+echo "configure:5625: checking for in_addr_t" >&5
cat > conftest.$ac_ext <<EOF
-#line 5403 "configure"
+#line 5627 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
in_addr_t foo;
; return 0; }
EOF
-if { (eval echo configure:5417: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5641: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_IN_ADDR_T 1
rm -f conftest*
echo $ac_n "checking whether struct ip_mreq is in netinet/in.h""... $ac_c" 1>&6
-echo "configure:5433: checking whether struct ip_mreq is in netinet/in.h" >&5
+echo "configure:5657: checking whether struct ip_mreq is in netinet/in.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 5435 "configure"
+#line 5659 "configure"
#include "confdefs.h"
#include <netinet/in.h>
int main() {
struct ip_mreq mreq;
; return 0; }
EOF
-if { (eval echo configure:5442: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5666: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_STRUCT_IP_MREQ 1
fi
rm -f conftest*
+echo $ac_n "checking whether struct ipv6_mreq is in netinet/in.h""... $ac_c" 1>&6
+echo "configure:5682: checking whether struct ipv6_mreq is in netinet/in.h" >&5
+cat > conftest.$ac_ext <<EOF
+#line 5684 "configure"
+#include "confdefs.h"
+#include <netinet/in.h>
+int main() {
+struct ipv6_mreq mreq6;
+; return 0; }
+EOF
+if { (eval echo configure:5691: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ cat >> confdefs.h <<\EOF
+#define HAVE_STRUCT_IPV6_MREQ 1
+EOF
+
+ echo "$ac_t""yes" 1>&6
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ echo "$ac_t""no" 1>&6
+fi
+rm -f conftest*
+
echo $ac_n "checking whether struct sockaddr_in6 is in netinet/in.h""... $ac_c" 1>&6
-echo "configure:5458: checking whether struct sockaddr_in6 is in netinet/in.h" >&5
+echo "configure:5707: checking whether struct sockaddr_in6 is in netinet/in.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 5460 "configure"
+#line 5709 "configure"
#include "confdefs.h"
#include <netinet/in.h>
int main() {
struct sockaddr_in6 addr6;
; return 0; }
EOF
-if { (eval echo configure:5467: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5716: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_INET6 1
rm -f conftest*
echo $ac_n "checking for socklen_t in sys/socket.h""... $ac_c" 1>&6
-echo "configure:5483: checking for socklen_t in sys/socket.h" >&5
+echo "configure:5732: checking for socklen_t in sys/socket.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 5485 "configure"
+#line 5734 "configure"
#include "confdefs.h"
+#define _POSIX_PII_SOCKET
#include <sys/types.h>
#include <sys/socket.h>
int main() {
socklen_t x = 5;
; return 0; }
EOF
-if { (eval echo configure:5493: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5743: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_SOCKLEN_T 1
rm -f conftest*
echo $ac_n "checking for tm_gmtoff in struct tm""... $ac_c" 1>&6
-echo "configure:5509: checking for tm_gmtoff in struct tm" >&5
+echo "configure:5759: checking for tm_gmtoff in struct tm" >&5
cat > conftest.$ac_ext <<EOF
-#line 5511 "configure"
+#line 5761 "configure"
#include "confdefs.h"
#include <time.h>
int main() {
struct tm tim; tim.tm_gmtoff = 0;
; return 0; }
EOF
-if { (eval echo configure:5518: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5768: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define STRUCT_TM_HAS_GMTOFF 1
rm -rf conftest*
echo "$ac_t""no" 1>&6
echo $ac_n "checking for global timezone variable""... $ac_c" 1>&6
-echo "configure:5531: checking for global timezone variable" >&5
+echo "configure:5781: checking for global timezone variable" >&5
cat > conftest.$ac_ext <<EOF
-#line 5533 "configure"
+#line 5783 "configure"
#include "confdefs.h"
#include <time.h>
int main() {
long z2 = timezone;
; return 0; }
EOF
-if { (eval echo configure:5540: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5790: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_TIMEZONE 1
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:5560: checking for working alloca.h" >&5
+echo "configure:5810: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5565 "configure"
+#line 5815 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:5572: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5822: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:5593: checking for alloca" >&5
+echo "configure:5843: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5598 "configure"
+#line 5848 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:5626: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5876: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:5658: checking whether alloca needs Cray hooks" >&5
+echo "configure:5908: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5663 "configure"
+#line 5913 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5688: checking for $ac_func" >&5
+echo "configure:5938: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5693 "configure"
+#line 5943 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5716: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5966: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:5743: checking stack direction for C alloca" >&5
+echo "configure:5993: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 5751 "configure"
+#line 6001 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:5770: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6020: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5797: checking for $ac_word" >&5
+echo "configure:6047: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_PERL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
sparc-sun-solaris*)
SIGNAL_HANDLER=include/sparc-signal.h
;;
- ia64-*)
- SYSDEP_SOURCES=sysdep/ia64.c
- test -d sysdep || mkdir sysdep
+# ia64-*)
+# SYSDEP_SOURCES=sysdep/ia64.c
+# test -d sysdep || mkdir sysdep
+# ;;
+ powerpc-*-linux*)
+ SIGNAL_HANDLER=include/dwarf2-signal.h
+ ;;
+ alpha*-*-linux*)
+ SIGNAL_HANDLER=include/dwarf2-signal.h
;;
*)
SIGNAL_HANDLER=include/default-signal.h
esac
# If we're using sjlj exceptions, forget what we just learned.
-if test "$libgcj_sjlj" = yes; then
+if test "$enable_sjlj_exceptions" = yes; then
SIGNAL_HANDLER=include/default-signal.h
fi
# Uses ac_ vars as temps to allow command line to override cache and checks.
# --without-x overrides everything else, but does not touch the cache.
echo $ac_n "checking for X""... $ac_c" 1>&6
-echo "configure:5866: checking for X" >&5
+echo "configure:6122: checking for X" >&5
# Check whether --with-x or --without-x was given.
if test "${with_x+set}" = set; then
# First, try using that file with no special directory specified.
cat > conftest.$ac_ext <<EOF
-#line 5928 "configure"
+#line 6184 "configure"
#include "confdefs.h"
#include <$x_direct_test_include>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5933: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6189: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_save_LIBS="$LIBS"
LIBS="-l$x_direct_test_library $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6002 "configure"
+#line 6258 "configure"
#include "confdefs.h"
int main() {
${x_direct_test_function}()
; return 0; }
EOF
-if { (eval echo configure:6009: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6265: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
LIBS="$ac_save_LIBS"
# We can link X programs with no special library path.
case "`(uname -sr) 2>/dev/null`" in
"SunOS 5"*)
echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
-echo "configure:6115: checking whether -R must be followed by a space" >&5
+echo "configure:6371: checking whether -R must be followed by a space" >&5
ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
cat > conftest.$ac_ext <<EOF
-#line 6118 "configure"
+#line 6374 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:6125: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6381: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_R_nospace=yes
else
else
LIBS="$ac_xsave_LIBS -R $x_libraries"
cat > conftest.$ac_ext <<EOF
-#line 6141 "configure"
+#line 6397 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:6148: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6404: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_R_space=yes
else
# libraries were built with DECnet support. And karl@cs.umb.edu says
# the Alpha needs dnet_stub (dnet does not exist).
echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
-echo "configure:6180: checking for dnet_ntoa in -ldnet" >&5
+echo "configure:6436: checking for dnet_ntoa in -ldnet" >&5
ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldnet $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6188 "configure"
+#line 6444 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dnet_ntoa()
; return 0; }
EOF
-if { (eval echo configure:6199: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test $ac_cv_lib_dnet_dnet_ntoa = no; then
echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
-echo "configure:6221: checking for dnet_ntoa in -ldnet_stub" >&5
+echo "configure:6477: checking for dnet_ntoa in -ldnet_stub" >&5
ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldnet_stub $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6229 "configure"
+#line 6485 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dnet_ntoa()
; return 0; }
EOF
-if { (eval echo configure:6240: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6496: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# The nsl library prevents programs from opening the X display
# on Irix 5.2, according to dickey@clark.net.
echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:6269: checking for gethostbyname" >&5
+echo "configure:6525: checking for gethostbyname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6274 "configure"
+#line 6530 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname(); below. */
; return 0; }
EOF
-if { (eval echo configure:6297: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6553: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname=yes"
else
if test $ac_cv_func_gethostbyname = no; then
echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
-echo "configure:6318: checking for gethostbyname in -lnsl" >&5
+echo "configure:6574: checking for gethostbyname in -lnsl" >&5
ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6326 "configure"
+#line 6582 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gethostbyname()
; return 0; }
EOF
-if { (eval echo configure:6337: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6593: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# -lsocket must be given before -lnsl if both are needed.
# We assume that if connect needs -lnsl, so does gethostbyname.
echo $ac_n "checking for connect""... $ac_c" 1>&6
-echo "configure:6367: checking for connect" >&5
+echo "configure:6623: checking for connect" >&5
if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6372 "configure"
+#line 6628 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char connect(); below. */
; return 0; }
EOF
-if { (eval echo configure:6395: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6651: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_connect=yes"
else
if test $ac_cv_func_connect = no; then
echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
-echo "configure:6416: checking for connect in -lsocket" >&5
+echo "configure:6672: checking for connect in -lsocket" >&5
ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6424 "configure"
+#line 6680 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
connect()
; return 0; }
EOF
-if { (eval echo configure:6435: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX.
echo $ac_n "checking for remove""... $ac_c" 1>&6
-echo "configure:6459: checking for remove" >&5
+echo "configure:6715: checking for remove" >&5
if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6464 "configure"
+#line 6720 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char remove(); below. */
; return 0; }
EOF
-if { (eval echo configure:6487: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6743: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_remove=yes"
else
if test $ac_cv_func_remove = no; then
echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
-echo "configure:6508: checking for remove in -lposix" >&5
+echo "configure:6764: checking for remove in -lposix" >&5
ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6516 "configure"
+#line 6772 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
remove()
; return 0; }
EOF
-if { (eval echo configure:6527: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6783: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
echo $ac_n "checking for shmat""... $ac_c" 1>&6
-echo "configure:6551: checking for shmat" >&5
+echo "configure:6807: checking for shmat" >&5
if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6556 "configure"
+#line 6812 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char shmat(); below. */
; return 0; }
EOF
-if { (eval echo configure:6579: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6835: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_shmat=yes"
else
if test $ac_cv_func_shmat = no; then
echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
-echo "configure:6600: checking for shmat in -lipc" >&5
+echo "configure:6856: checking for shmat in -lipc" >&5
ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lipc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6608 "configure"
+#line 6864 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
shmat()
; return 0; }
EOF
-if { (eval echo configure:6619: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6875: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# libraries we check for below, so use a different variable.
# --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
-echo "configure:6652: checking for IceConnectionNumber in -lICE" >&5
+echo "configure:6908: checking for IceConnectionNumber in -lICE" >&5
ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lICE $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6660 "configure"
+#line 6916 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
IceConnectionNumber()
; return 0; }
EOF
-if { (eval echo configure:6671: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6927: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
gtk)
# Nothing, yet...
;;
+ no)
+ use_xlib_awt=
+ use_gtk_awt=
+ break
+ ;;
*)
echo "*** unrecognised argument \"${peer}\" for --enable-java-awt" 1>&2
exit 1
ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"
-trap 'rm -fr `echo "Makefile libgcj.spec libgcj-test.spec gnu/classpath/Configuration.java gcj/Makefile include/Makefile testsuite/Makefile include/config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "Makefile libgcj.spec libgcj-test.spec gnu/classpath/Configuration.java gcj/Makefile include/Makefile testsuite/Makefile include/config.h gcj/libgcj-config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
+s%@LN_S@%$LN_S%g
+s%@libgcj_basedir@%$libgcj_basedir%g
+s%@mkinstalldirs@%$mkinstalldirs%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@build_cpu@%$build_cpu%g
s%@build_vendor@%$build_vendor%g
s%@build_os@%$build_os%g
-s%@LN_S@%$LN_S%g
-s%@libgcj_basedir@%$libgcj_basedir%g
s%@CC@%$CC%g
s%@CXX@%$CXX%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@TESTSUBDIR_TRUE@%$TESTSUBDIR_TRUE%g
s%@TESTSUBDIR_FALSE@%$TESTSUBDIR_FALSE%g
s%@LIBGCJDEBUG@%$LIBGCJDEBUG%g
-s%@LIBDATASTARTSPEC@%$LIBDATASTARTSPEC%g
+s%@LIBFFI@%$LIBFFI%g
+s%@LIBFFIINCS@%$LIBFFIINCS%g
s%@CPP@%$CPP%g
s%@SYSTEMSPEC@%$SYSTEMSPEC%g
s%@LIBGCJTESTSPEC@%$LIBGCJTESTSPEC%g
s%@THREADDEPS@%$THREADDEPS%g
s%@THREADOBJS@%$THREADOBJS%g
s%@THREADSPEC@%$THREADSPEC%g
+s%@HASH_SYNC_SPEC@%$HASH_SYNC_SPEC%g
s%@USING_GCC_TRUE@%$USING_GCC_TRUE%g
s%@USING_GCC_FALSE@%$USING_GCC_FALSE%g
+s%@LIBICONV@%$LIBICONV%g
s%@GCJ@%$GCJ%g
s%@GCJFLAGS@%$GCJFLAGS%g
s%@ZLIBS@%$ZLIBS%g
s%@ZDEPS@%$ZDEPS%g
s%@ZINCS@%$ZINCS%g
s%@DIVIDESPEC@%$DIVIDESPEC%g
+s%@EXCEPTIONSPEC@%$EXCEPTIONSPEC%g
s%@CANADIAN_TRUE@%$CANADIAN_TRUE%g
s%@CANADIAN_FALSE@%$CANADIAN_FALSE%g
s%@NULL_TARGET_TRUE@%$NULL_TARGET_TRUE%g
if test "${CONFIG_HEADERS+set}" != set; then
EOF
cat >> $CONFIG_STATUS <<EOF
- CONFIG_HEADERS="include/config.h"
+ CONFIG_HEADERS="include/config.h gcj/libgcj-config.h"
EOF
cat >> $CONFIG_STATUS <<\EOF
fi
EOF
cat >> $CONFIG_STATUS <<\EOF
-test -z "$CONFIG_HEADERS" || echo timestamp > include/stamp-h
-if test -n "$CONFIG_FILES"; then
- ac_file=Makefile . ${libgcj_basedir}/../config-ml.in
-fi
+am_indx=1
+for am_file in include/config.h gcj/libgcj-config.h; do
+ case " $CONFIG_HEADERS " in
+ *" $am_file "*)
+ echo timestamp > `echo $am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
+ ;;
+ esac
+ am_indx=`expr "$am_indx" + 1`
+done
+# Only add multilib support code if we just rebuilt top-level Makefile.
+case " $CONFIG_FILES " in
+ *" Makefile "*)
+ ac_file=Makefile . ${libgcj_basedir}/../config-ml.in
+ ;;
+esac
# Make subdirectories and `.d' files. Look in both srcdir and
# builddir for the .java files.
d=`echo $f | sed -e 's,/[^/]*$,,'`
- $srcdir/../mkinstalldirs $d
+ $libgcj_basedir/../mkinstalldirs $d
echo > $f
}
done