ac_help="$ac_help
--with-cross-host=HOST configuring with a cross compiler"
ac_help="$ac_help
+ --with-newlib Configuring with newlib"
+ac_help="$ac_help
--enable-multilib build many library versions (default)"
ac_help="$ac_help
--enable-maintainer-mode enable make rules and dependencies not useful
program_transform_name=s,x,x,
silent=
site=
-sitefile=
srcdir=
target=NONE
verbose=
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
- --site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
- -site-file | --site-file | --site-fil | --site-fi | --site-f)
- ac_prev=sitefile ;;
- -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
- sitefile="$ac_optarg" ;;
-
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
- if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
- fi
+if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
fi
-else
- CONFIG_SITE="$sitefile"
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
+# This works around the fact that libtool configuration may change LD
+# for this particular configuration, but some shells, instead of
+# keeping the changes in LD private, export them just because LD is
+# exported.
+ORIGINAL_LD_FOR_MULTILIBS=$LD
+
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:590: checking whether ln -s works" >&5
+echo "configure:587: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
+# Check whether --with-newlib or --without-newlib was given.
+if test "${with_newlib+set}" = set; then
+ withval="$with_newlib"
+ :
+fi
+
+
# Find a good install program. We prefer a C program (faster),
# so one script is as good as another. But avoid the broken or
# incompatible versions:
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:636: checking for a BSD compatible install" >&5
+echo "configure:640: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6
-echo "configure:689: checking whether build environment is sane" >&5
+echo "configure:693: checking whether build environment is sane" >&5
# Just in case
sleep 1
echo timestamp > conftestfile
test "$program_transform_name" = "" && program_transform_name="s,x,x,"
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:746: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:750: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
fi
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:779: checking for Cygwin environment" >&5
+echo "configure:783: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 784 "configure"
+#line 788 "configure"
#include "confdefs.h"
int main() {
return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:795: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:799: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:812: checking for mingw32 environment" >&5
+echo "configure:816: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 817 "configure"
+#line 821 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:824: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:828: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
fi
# This works around an automake problem.
-mkinstalldirs="`cd $ac_aux_dir && pwd`/mkinstalldirs"
+mkinstalldirs="`cd $ac_aux_dir && ${PWDCMD-pwd}`/mkinstalldirs"
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:951: checking host system type" >&5
+echo "configure:955: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:972: checking target system type" >&5
+echo "configure:976: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:990: checking build system type" >&5
+echo "configure:994: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1019: checking for $ac_word" >&5
+echo "configure:1023: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1049: checking for $ac_word" >&5
+echo "configure:1053: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1100: checking for $ac_word" >&5
+echo "configure:1104: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1133: checking whether we are using GNU C" >&5
+echo "configure:1137: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1142: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1146: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1161: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1165: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1210: checking for $ac_word" >&5
+echo "configure:1214: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_glibjava_CXX'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -z "$glibjava_CXX" && { echo "configure: error: no acceptable c++ found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking whether we are using GNU C++""... $ac_c" 1>&6
-echo "configure:1245: checking whether we are using GNU C++" >&5
+echo "configure:1249: checking whether we are using GNU C++" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gxx'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1254: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CXX-g++} -E conftest.C'; { (eval echo configure:1258: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gxx=yes
else
ac_cv_prog_gxx=no
ac_save_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=
echo $ac_n "checking whether ${CXX-g++} accepts -g""... $ac_c" 1>&6
-echo "configure:1269: checking whether ${CXX-g++} accepts -g" >&5
+echo "configure:1273: checking whether ${CXX-g++} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cxx_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
missing_dir=`cd $ac_aux_dir && pwd`
echo $ac_n "checking for working aclocal""... $ac_c" 1>&6
-echo "configure:1318: checking for working aclocal" >&5
+echo "configure:1322: checking for working aclocal" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoconf""... $ac_c" 1>&6
-echo "configure:1331: checking for working autoconf" >&5
+echo "configure:1335: checking for working autoconf" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working automake""... $ac_c" 1>&6
-echo "configure:1344: checking for working automake" >&5
+echo "configure:1348: checking for working automake" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working autoheader""... $ac_c" 1>&6
-echo "configure:1357: checking for working autoheader" >&5
+echo "configure:1361: checking for working autoheader" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
fi
echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6
-echo "configure:1370: checking for working makeinfo" >&5
+echo "configure:1374: checking for working makeinfo" >&5
# Run test in a subshell; some versions of sh will print an error if
# an executable is not found, even if stderr is redirected.
# Redirect stdin to placate older versions of autoconf. Sigh.
# LIBGCJ_CONFIGURE, which doesn't work because that means that it will
# be run before AC_CANONICAL_HOST.
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1389: checking build system type" >&5
+echo "configure:1393: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
set dummy ${ac_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1410: checking for $ac_word" >&5
+echo "configure:1414: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1442: checking for $ac_word" >&5
+echo "configure:1446: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1474: checking for $ac_word" >&5
+echo "configure:1478: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1506: checking for $ac_word" >&5
+echo "configure:1510: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1551: checking for a BSD compatible install" >&5
+echo "configure:1555: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:1605: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:1609: checking whether to enable maintainer-specific portions of Makefiles" >&5
# Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then
enableval="$enable_maintainer_mode"
-# We need AC_EXEEXT to keep automake happy in cygnus mode. However,
-# at least currently, we never actually build a program, so we never
-# need to use $(EXEEXT). Moreover, the test for EXEEXT normally
-# fails, because we are probably configuring with a cross compiler
-# which cant create executables. So we include AC_EXEEXT to keep
-# automake happy, but we don't execute it, since we don't care about
-# the result.
-if false; then
- # autoconf 2.50 runs AC_EXEEXT by default, and the macro expands
- # to nothing, so nothing would remain between `then' and `fi' if it
- # were not for the `:' below.
- :
-
+
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1643: checking for executable suffix" >&5
+echo "configure:1635: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:1653: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:1645: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
- *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+ *.c | *.o | *.obj) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac
done
echo "$ac_t""${ac_cv_exeext}" 1>&6
ac_exeext=$EXEEXT
-fi
# configure.host sets the following important variables
# libgcj_cflags - host specific C compiler flags
# Sigh. Libtool's macro doesn't do the right thing.
INCLTDL="-I\$(top_srcdir)/libltdl $INCLTDL"
# FIXME: this is a hack.
- sub_auxdir="`cd $ac_aux_dir && pwd`"
+ sub_auxdir="`cd $ac_aux_dir && ${PWDCMD-pwd}`"
ac_configure_args="$ac_configure_args --with-auxdir=$sub_auxdir"
fi
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1804: checking for ld used by GCC" >&5
+echo "configure:1795: checking for ld used by GCC" >&5
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1834: checking for GNU ld" >&5
+echo "configure:1825: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1837: checking for non-GNU ld" >&5
+echo "configure:1828: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1872: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1863: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1889: checking for $LD option to reload object files" >&5
+echo "configure:1880: checking for $LD option to reload object files" >&5
if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$reload_flag" && reload_flag=" $reload_flag"
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1901: checking for BSD-compatible nm" >&5
+echo "configure:1892: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""$NM" 1>&6
echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:1939: checking how to recognise dependant libraries" >&5
+echo "configure:1930: checking how to recognise dependant libraries" >&5
if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
deplibs_check_method=$lt_cv_deplibs_check_method
echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:2103: checking for object suffix" >&5
+echo "configure:2094: checking for object suffix" >&5
if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:2109: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2100: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
for ac_file in conftest.*; do
case $ac_file in
*.c) ;;
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:2133: checking for ${ac_tool_prefix}file" >&5
+echo "configure:2124: checking for ${ac_tool_prefix}file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:2195: checking for file" >&5
+echo "configure:2186: checking for file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2266: checking for $ac_word" >&5
+echo "configure:2257: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2298: checking for $ac_word" >&5
+echo "configure:2289: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2333: checking for $ac_word" >&5
+echo "configure:2324: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2365: checking for $ac_word" >&5
+echo "configure:2356: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case $host in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 2432 "configure"' > conftest.$ac_ext
- if { (eval echo configure:2433: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 2423 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:2424: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -32"
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2454: checking whether the C compiler needs -belf" >&5
+echo "configure:2445: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 2467 "configure"
+#line 2458 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2474: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2465: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
esac
echo $ac_n "checking how to run the C++ preprocessor""... $ac_c" 1>&6
-echo "configure:2504: checking how to run the C++ preprocessor" >&5
+echo "configure:2495: checking how to run the C++ preprocessor" >&5
if test -z "$CXXCPP"; then
if eval "test \"`echo '$''{'ac_cv_prog_CXXCPP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
cross_compiling=$ac_cv_prog_cxx_cross
CXXCPP="${CXX-g++} -E"
cat > conftest.$ac_ext <<EOF
-#line 2517 "configure"
+#line 2508 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2522: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2513: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
enable_hash_synchronization=$enable_hash_synchronization_default
fi
+if test "${slow_pthread_self}" = "yes"; then
+ cat >> confdefs.h <<\EOF
+#define SLOW_PTHREAD_SELF 1
+EOF
+
+fi
+
LIBGCJDEBUG="false"
fi
echo $ac_n "checking for exception model to use""... $ac_c" 1>&6
-echo "configure:2749: checking for exception model to use" >&5
+echo "configure:2747: checking for exception model to use" >&5
ac_ext=C
# CXXFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
:
else
cat > conftest.$ac_ext << EOF
-#line 2764 "configure"
+#line 2762 "configure"
struct S { ~S(); };
void bar();
void foo()
EOF
old_CXXFLAGS="$CXXFLAGS"
CXXFLAGS=-S
-if { (eval echo configure:2775: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2773: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
if grep _Unwind_SjLj_Resume conftest.s >/dev/null 2>&1 ; then
enable_sjlj_exceptions=yes
elif grep _Unwind_Resume conftest.s >/dev/null 2>&1 ; then
echo "$ac_t""$ac_exception_model_name" 1>&6
+# If we are non using SJLJ exceptions, and this host does not have support
+# for unwinding from a signal handler, enable checked dereferences and divides.
+if test $can_unwind_signal = no && test $enable_sjlj_exceptions = no; then
+ CHECKREFSPEC=-fcheck-references
+ DIVIDESPEC=-fuse-divide-subroutine
+ EXCEPTIONSPEC=
+fi
+
# Check whether --enable-java-net or --disable-java-net was given.
if test "${enable_java_net+set}" = set; then
enableval="$enable_java_net"
#define USE_LIBFFI 1
EOF
- LIBFFI=../libffi/libfficonvenience.la
+ LIBFFI=../libffi/libffi_convenience.la
LIBFFIINCS='-I$(top_srcdir)/../libffi/include -I$(MULTIBUILDTOP)../libffi/include'
fi
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2897: checking how to run the C preprocessor" >&5
+echo "configure:2903: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 2912 "configure"
+#line 2918 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2918: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2924: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 2929 "configure"
+#line 2935 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2935: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2941: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 2946 "configure"
+#line 2952 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2952: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2958: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
echo "$ac_t""$CPP" 1>&6
cat > conftest.$ac_ext <<EOF
-#line 2977 "configure"
+#line 2983 "configure"
#include "confdefs.h"
#include <stdint.h>
EOF
rm -f conftest*
cat > conftest.$ac_ext <<EOF
-#line 2992 "configure"
+#line 2998 "configure"
#include "confdefs.h"
#include <inttypes.h>
EOF
rm -f conftest*
cat > conftest.$ac_ext <<EOF
-#line 3007 "configure"
+#line 3013 "configure"
#include "confdefs.h"
#include <sys/types.h>
EOF
rm -f conftest*
cat > conftest.$ac_ext <<EOF
-#line 3022 "configure"
+#line 3028 "configure"
#include "confdefs.h"
#include <sys/config.h>
EOF
cat > conftest.$ac_ext <<EOF
-#line 3039 "configure"
+#line 3045 "configure"
#include "confdefs.h"
#include <time.h>
EOF
rm -f conftest*
cat > conftest.$ac_ext <<EOF
-#line 3054 "configure"
+#line 3060 "configure"
#include "confdefs.h"
#include <time.h>
EOF
esac
-LIBGCJTESTSPEC="-L`pwd`/.libs -rpath `pwd`/.libs"
+LIBGCJTESTSPEC="-L`${PWDCMD-pwd}`/.libs -rpath `${PWDCMD-pwd}`/.libs"
# Check whether --with-system-zlib or --without-system-zlib was given.
libsubdir=.libs
echo $ac_n "checking for garbage collector to use""... $ac_c" 1>&6
-echo "configure:3106: checking for garbage collector to use" >&5
+echo "configure:3112: checking for garbage collector to use" >&5
# Check whether --enable-java-gc or --disable-java-gc was given.
if test "${enable_java_gc+set}" = set; then
enableval="$enable_java_gc"
case "$GC" in
boehm)
echo "$ac_t""boehm" 1>&6
- GCDEPS='$(top_builddir)/../boehm-gc/libgcjgc.la'
- # We include the path to the boehm-gc build directory.
- # See Makefile.am to understand why.
- GCLIBS="$GCDEPS -L\$(here)/../boehm-gc/$libsubdir"
+ GCLIBS=../boehm-gc/libgcjgc_convenience.la
GCINCS='-I$(top_srcdir)/../boehm-gc/include'
- GCSPEC='-lgcjgc'
JC1GCSPEC='-fuse-boehm-gc'
- GCTESTSPEC="-L`pwd`/../boehm-gc/.libs -rpath `pwd`/../boehm-gc/.libs"
+ GCTESTSPEC="-L`${PWDCMD-pwd}`/../boehm-gc/.libs -rpath `${PWDCMD-pwd}`/../boehm-gc/.libs"
+
GCINCS="$GCINCS `cat ../boehm-gc/boehm-cflags`"
GCOBJS=boehm.lo
GCHDR=boehm-gc.h
echo $ac_n "checking for thread model used by GCC""... $ac_c" 1>&6
-echo "configure:3162: checking for thread model used by GCC" >&5
+echo "configure:3165: checking for thread model used by GCC" >&5
THREADS=`$CC -v 2>&1 | sed -n 's/^Thread model: //p'`
echo "$ac_t""$THREADS" 1>&6
;;
esac
+THREADLDFLAGS=
THREADLIBS=
THREADINCS=
THREADDEPS=
# Before FreeBSD 5, it didn't have -lpthread (or any library which
# merely adds pthread_* functions) but it does have a -pthread switch
# which is required at link-time to select -lc_r *instead* of -lc.
- THREADLIBS=-pthread
+ THREADLDFLAGS=-pthread
# Don't set THREADSPEC here as might be expected since -pthread is
# not processed when found within a spec file, it must come from
# the command line. For now, the user must provide the -pthread
# FreeBSD 5 implements a model much closer to other modern UNIX
# which support threads. However, it still does not support
# -lpthread.
- THREADLIBS=-pthread
+ THREADLDFLAGS=-pthread
THREADSPEC=-lc_r
;;
*)
+
+if test -d sysdep; then true; else mkdir sysdep; fi
+
+
HASH_SYNC_SPEC=
# Hash synchronization is only useful with posix threads right now.
if test "$enable_hash_synchronization" = yes && test "$THREADS" = "posix"; then
# We're in the tree with gcc, and need to include some of its headers.
GCC_UNWIND_INCLUDE='-I$(libgcj_basedir)/../gcc'
-if test -n "${with_cross_host}"; then
+# Figure out where generated headers like libgcj-config.h get installed.
+gcc_version_trigger=${libgcj_basedir}/../gcc/version.c
+gcc_version_full=`grep version_string ${gcc_version_trigger} | sed -e 's/.*\"\([^\"]*\)\".*/\1/'`
+gcc_version=`echo ${gcc_version_full} | sed -e 's/\([^ ]*\) .*/\1/'`
+tool_include_dir='$(libdir)/gcc-lib/$(target_alias)/'${gcc_version}/include
+
+
+
+if test "x${with_newlib}" = "xyes"; then
# We are being configured with a cross compiler. AC_REPLACE_FUNCS
# may not work correctly, because the compiler may not be able to
# link executables.
EOF
cat >> confdefs.h <<\EOF
+#define HAVE_TIME 1
+EOF
+
+ cat >> confdefs.h <<\EOF
#define HAVE_GMTIME_R 1
EOF
EOF
- ZLIBSPEC=-lzgcj
- ZLIBTESTSPEC="-L`pwd`/../zlib/.libs -rpath `pwd`/../zlib/.libs"
-
# If Canadian cross, then don't pick up tools from the build
# directory.
if test x"$build" != x"$with_cross_host" && x"$build" != x"$target"; then
for ac_func in strerror ioctl select fstat open fsync sleep opendir
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3355: checking for $ac_func" >&5
+echo "configure:3372: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3360 "configure"
+#line 3377 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3383: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3400: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in gmtime_r localtime_r readdir_r getpwuid_r getcwd
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3410: checking for $ac_func" >&5
+echo "configure:3427: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3415 "configure"
+#line 3432 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3438: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in access stat mkdir rename rmdir unlink realpath utime chmod
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3465: checking for $ac_func" >&5
+echo "configure:3482: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3470 "configure"
+#line 3487 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3493: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3510: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in nl_langinfo setlocale
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3520: checking for $ac_func" >&5
+echo "configure:3537: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3525 "configure"
+#line 3542 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3548: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3565: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in inet_aton inet_addr
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3575: checking for $ac_func" >&5
+echo "configure:3592: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3580 "configure"
+#line 3597 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3603: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3620: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in inet_pton uname inet_ntoa
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3630: checking for $ac_func" >&5
+echo "configure:3647: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3635 "configure"
+#line 3652 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3658: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3675: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
done
- for ac_func in backtrace fork execvp pipe sigaction
+ for ac_func in fork execvp pipe sigaction
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3685: checking for $ac_func" >&5
+echo "configure:3702: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3690 "configure"
+#line 3707 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3713: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3730: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3741: checking for $ac_hdr" >&5
+echo "configure:3758: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3746 "configure"
+#line 3763 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3751: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3768: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
done
+ echo $ac_n "checking for backtrace""... $ac_c" 1>&6
+echo "configure:3795: checking for backtrace" >&5
+if eval "test \"`echo '$''{'ac_cv_func_backtrace'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 3800 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char backtrace(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char backtrace();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_backtrace) || defined (__stub___backtrace)
+choke me
+#else
+backtrace();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:3823: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_backtrace=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_backtrace=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'backtrace`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+
+ case "$host" in
+ ia64-*-linux*)
+ # Has broken backtrace()
+ ;;
+ s390*-*-linux*)
+ # Has broken backtrace()
+ ;;
+ *)
+ cat >> confdefs.h <<\EOF
+#define HAVE_BACKTRACE 1
+EOF
+
+ ;;
+ esac
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+
echo $ac_n "checking for dladdr in -ldl""... $ac_c" 1>&6
-echo "configure:3778: checking for dladdr in -ldl" >&5
+echo "configure:3859: checking for dladdr in -ldl" >&5
ac_lib_var=`echo dl'_'dladdr | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3786 "configure"
+#line 3867 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dladdr()
; return 0; }
EOF
-if { (eval echo configure:3797: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3878: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
fi
- for ac_file in /proc/self/exe
+ if test x"$build" = x"$host"; then
+ for ac_file in /proc/self/exe
do
ac_safe=`echo "$ac_file" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_file""... $ac_c" 1>&6
-echo "configure:3826: checking for $ac_file" >&5
+echo "configure:3908: checking for $ac_file" >&5
if eval "test \"`echo '$''{'ac_cv_file_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
#define $ac_tr_file 1
EOF
- cat >> confdefs.h <<\EOF
+ cat >> confdefs.h <<\EOF
#define HAVE_PROC_SELF_EXE 1
EOF
fi
done
+ else
+ case $host in
+ *-linux*)
+ cat >> confdefs.h <<\EOF
+#define HAVE_PROC_SELF_EXE 1
+EOF
+
+ ;;
+ esac
+ fi
echo $ac_n "checking for iconv""... $ac_c" 1>&6
-echo "configure:3874: checking for iconv" >&5
+echo "configure:3966: checking for iconv" >&5
if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
am_cv_func_iconv="no, consider installing GNU libiconv"
am_cv_lib_iconv=no
cat > conftest.$ac_ext <<EOF
-#line 3882 "configure"
+#line 3974 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:3892: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3984: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_func_iconv=yes
else
am_save_LIBS="$LIBS"
LIBS="$LIBS $am_cv_libiconv_ldpath -liconv"
cat > conftest.$ac_ext <<EOF
-#line 3904 "configure"
+#line 3996 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <iconv.h>
iconv_close(cd);
; return 0; }
EOF
-if { (eval echo configure:3914: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4006: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_lib_iconv=yes
am_cv_func_iconv=yes
EOF
echo $ac_n "checking for iconv declaration""... $ac_c" 1>&6
-echo "configure:3935: checking for iconv declaration" >&5
+echo "configure:4027: checking for iconv declaration" >&5
if eval "test \"`echo '$''{'am_cv_proto_iconv'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3941 "configure"
+#line 4033 "configure"
#include "confdefs.h"
#include <stdlib.h>
; return 0; }
EOF
-if { (eval echo configure:3960: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4052: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
am_cv_proto_iconv_arg1=""
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:3989: checking for LC_MESSAGES" >&5
+echo "configure:4081: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3994 "configure"
+#line 4086 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:4001: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4093: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether struct tm is in sys/time.h or time.h""... $ac_c" 1>&6
-echo "configure:4022: checking whether struct tm is in sys/time.h or time.h" >&5
+echo "configure:4114: checking whether struct tm is in sys/time.h or time.h" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4027 "configure"
+#line 4119 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <time.h>
struct tm *tp; tp->tm_sec;
; return 0; }
EOF
-if { (eval echo configure:4035: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4127: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tm=time.h
else
fi
echo $ac_n "checking for tm_zone in struct tm""... $ac_c" 1>&6
-echo "configure:4056: checking for tm_zone in struct tm" >&5
+echo "configure:4148: checking for tm_zone in struct tm" >&5
if eval "test \"`echo '$''{'ac_cv_struct_tm_zone'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4061 "configure"
+#line 4153 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <$ac_cv_struct_tm>
struct tm tm; tm.tm_zone;
; return 0; }
EOF
-if { (eval echo configure:4069: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4161: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_struct_tm_zone=yes
else
else
echo $ac_n "checking for tzname""... $ac_c" 1>&6
-echo "configure:4089: checking for tzname" >&5
+echo "configure:4181: checking for tzname" >&5
if eval "test \"`echo '$''{'ac_cv_var_tzname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4094 "configure"
+#line 4186 "configure"
#include "confdefs.h"
#include <time.h>
#ifndef tzname /* For SGI. */
atoi(*tzname);
; return 0; }
EOF
-if { (eval echo configure:4104: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4196: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_var_tzname=yes
else
for ac_func in gethostbyname_r
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4129: checking for $ac_func" >&5
+echo "configure:4221: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4134 "configure"
+#line 4226 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4157: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4249: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# We look for the one that returns `int'.
# Hopefully this check is robust enough.
cat > conftest.$ac_ext <<EOF
-#line 4184 "configure"
+#line 4276 "configure"
#include "confdefs.h"
#include <netdb.h>
EOF
*" -D_REENTRANT "*) ;;
*)
echo $ac_n "checking whether gethostbyname_r declaration requires -D_REENTRANT""... $ac_c" 1>&6
-echo "configure:4204: checking whether gethostbyname_r declaration requires -D_REENTRANT" >&5
+echo "configure:4296: checking whether gethostbyname_r declaration requires -D_REENTRANT" >&5
if eval "test \"`echo '$''{'libjava_cv_gethostbyname_r_needs_reentrant'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cross_compiling=$ac_cv_prog_cxx_cross
cat > conftest.$ac_ext <<EOF
-#line 4217 "configure"
+#line 4309 "configure"
#include "confdefs.h"
#include <netdb.h>
int main() {
gethostbyname_r("", 0, 0);
; return 0; }
EOF
-if { (eval echo configure:4224: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4316: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
libjava_cv_gethostbyname_r_needs_reentrant=no
else
CPPFLAGS_SAVE="$CPPFLAGS"
CPPFLAGS="$CPPFLAGS -D_REENTRANT"
cat > conftest.$ac_ext <<EOF
-#line 4234 "configure"
+#line 4326 "configure"
#include "confdefs.h"
#include <netdb.h>
int main() {
gethostbyname_r("", 0, 0);
; return 0; }
EOF
-if { (eval echo configure:4241: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4333: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
libjava_cv_gethostbyname_r_needs_reentrant=yes
else
esac
echo $ac_n "checking for struct hostent_data""... $ac_c" 1>&6
-echo "configure:4276: checking for struct hostent_data" >&5
+echo "configure:4368: checking for struct hostent_data" >&5
if eval "test \"`echo '$''{'libjava_cv_struct_hostent_data'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4281 "configure"
+#line 4373 "configure"
#include "confdefs.h"
#if GETHOSTBYNAME_R_NEEDS_REENTRANT && !defined(_REENTRANT)
struct hostent_data data;
; return 0; }
EOF
-if { (eval echo configure:4292: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4384: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
libjava_cv_struct_hostent_data=yes
else
# to exist where expected. (The root issue: AC_CHECK_FUNCS assumes C
# linkage check is enough, yet C++ code requires proper prototypes.)
cat > conftest.$ac_ext <<EOF
-#line 4324 "configure"
+#line 4416 "configure"
#include "confdefs.h"
#include <netdb.h>
EOF
for ac_func in gethostbyaddr_r
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4335: checking for $ac_func" >&5
+echo "configure:4427: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4340 "configure"
+#line 4432 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4363: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4455: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# We look for the one that returns `int'.
# Hopefully this check is robust enough.
cat > conftest.$ac_ext <<EOF
-#line 4390 "configure"
+#line 4482 "configure"
#include "confdefs.h"
#include <netdb.h>
EOF
for ac_func in gethostname
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4417: checking for $ac_func" >&5
+echo "configure:4509: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4422 "configure"
+#line 4514 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4445: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4537: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
EOF
cat > conftest.$ac_ext <<EOF
-#line 4469 "configure"
+#line 4561 "configure"
#include "confdefs.h"
#include <unistd.h>
EOF
for ac_func in pthread_mutexattr_settype pthread_mutexattr_setkind_np
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4500: checking for $ac_func" >&5
+echo "configure:4592: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4505 "configure"
+#line 4597 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4528: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4620: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in sched_yield
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4558: checking for $ac_func" >&5
+echo "configure:4650: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4563 "configure"
+#line 4655 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4586: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4678: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for sched_yield in -lrt""... $ac_c" 1>&6
-echo "configure:4608: checking for sched_yield in -lrt" >&5
+echo "configure:4700: checking for sched_yield in -lrt" >&5
ac_lib_var=`echo rt'_'sched_yield | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lrt $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4616 "configure"
+#line 4708 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sched_yield()
; return 0; }
EOF
-if { (eval echo configure:4627: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4719: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for sched_yield in -lposix4""... $ac_c" 1>&6
-echo "configure:4653: checking for sched_yield in -lposix4" >&5
+echo "configure:4745: checking for sched_yield in -lposix4" >&5
ac_lib_var=`echo posix4'_'sched_yield | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix4 $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4661 "configure"
+#line 4753 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
sched_yield()
; return 0; }
EOF
-if { (eval echo configure:4672: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4764: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# We can save a little space at runtime if the mutex has m_count
# or __m_count. This is a nice hack for Linux.
cat > conftest.$ac_ext <<EOF
-#line 4708 "configure"
+#line 4800 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:4717: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4809: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define PTHREAD_MUTEX_HAVE_M_COUNT 1
rm -rf conftest*
cat > conftest.$ac_ext <<EOF
-#line 4729 "configure"
+#line 4821 "configure"
#include "confdefs.h"
#include <pthread.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:4738: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:4830: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define PTHREAD_MUTEX_HAVE___M_COUNT 1
for ac_func in gettimeofday time ftime
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4758: checking for $ac_func" >&5
+echo "configure:4850: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4763 "configure"
+#line 4855 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4786: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4878: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in memmove
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4817: checking for $ac_func" >&5
+echo "configure:4909: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4822 "configure"
+#line 4914 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4845: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4937: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in memcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4875: checking for $ac_func" >&5
+echo "configure:4967: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4880 "configure"
+#line 4972 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4903: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4995: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking for dlopen in -ldl""... $ac_c" 1>&6
-echo "configure:4932: checking for dlopen in -ldl" >&5
+echo "configure:5024: checking for dlopen in -ldl" >&5
ac_lib_var=`echo dl'_'dlopen | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4940 "configure"
+#line 5032 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dlopen()
; return 0; }
EOF
-if { (eval echo configure:4951: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5043: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
#--------------------------------------------------------------------
echo $ac_n "checking for socket libraries""... $ac_c" 1>&6
-echo "configure:4996: checking for socket libraries" >&5
+echo "configure:5088: checking for socket libraries" >&5
if eval "test \"`echo '$''{'gcj_cv_lib_sockets'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
gcj_checkBoth=0
unset ac_cv_func_connect
echo $ac_n "checking for connect""... $ac_c" 1>&6
-echo "configure:5004: checking for connect" >&5
+echo "configure:5096: checking for connect" >&5
if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5009 "configure"
+#line 5101 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char connect(); below. */
; return 0; }
EOF
-if { (eval echo configure:5032: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5124: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_connect=yes"
else
if test "$gcj_checkSocket" = 1; then
unset ac_cv_func_connect
echo $ac_n "checking for main in -lsocket""... $ac_c" 1>&6
-echo "configure:5055: checking for main in -lsocket" >&5
+echo "configure:5147: checking for main in -lsocket" >&5
ac_lib_var=`echo socket'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5063 "configure"
+#line 5155 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:5070: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5162: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
LIBS="$LIBS -lsocket -lnsl"
unset ac_cv_func_accept
echo $ac_n "checking for accept""... $ac_c" 1>&6
-echo "configure:5097: checking for accept" >&5
+echo "configure:5189: checking for accept" >&5
if eval "test \"`echo '$''{'ac_cv_func_accept'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5102 "configure"
+#line 5194 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char accept(); below. */
; return 0; }
EOF
-if { (eval echo configure:5125: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5217: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_accept=yes"
else
gcj_oldLibs=$LIBS
LIBS="$LIBS $gcj_cv_lib_sockets"
echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:5152: checking for gethostbyname" >&5
+echo "configure:5244: checking for gethostbyname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5157 "configure"
+#line 5249 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname(); below. */
; return 0; }
EOF
-if { (eval echo configure:5180: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5272: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname=yes"
else
else
echo "$ac_t""no" 1>&6
echo $ac_n "checking for main in -lnsl""... $ac_c" 1>&6
-echo "configure:5198: checking for main in -lnsl" >&5
+echo "configure:5290: checking for main in -lnsl" >&5
ac_lib_var=`echo nsl'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5206 "configure"
+#line 5298 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:5213: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5305: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test "$with_system_zlib" = yes; then
echo $ac_n "checking for deflate in -lz""... $ac_c" 1>&6
-echo "configure:5245: checking for deflate in -lz" >&5
+echo "configure:5337: checking for deflate in -lz" >&5
ac_lib_var=`echo z'_'deflate | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lz $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5253 "configure"
+#line 5345 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
deflate()
; return 0; }
EOF
-if { (eval echo configure:5264: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5356: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
ZLIBSPEC=-lz
else
echo "$ac_t""no" 1>&6
-ZLIBSPEC=-lzgcj
+ZLIBSPEC=
fi
- else
- ZLIBSPEC=-lzgcj
- ZLIBTESTSPEC="-L`pwd`/../zlib/.libs -rpath `pwd`/../zlib/.libs"
fi
# On Solaris, and maybe other architectures, the Boehm collector
# requires -ldl.
if test "$GC" = boehm; then
echo $ac_n "checking for main in -ldl""... $ac_c" 1>&6
-echo "configure:5294: checking for main in -ldl" >&5
+echo "configure:5383: checking for main in -ldl" >&5
ac_lib_var=`echo dl'_'main | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5302 "configure"
+#line 5391 "configure"
#include "confdefs.h"
int main() {
main()
; return 0; }
EOF
-if { (eval echo configure:5309: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:5398: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
if test -x "${builddotdot}/../../gcc/gcj"; then
- dir="`cd ${builddotdot}/../../gcc && pwd`"
- GCJ="$dir/gcj -B`pwd`/ -B$dir/"
+ dir="`cd ${builddotdot}/../../gcc && ${PWDCMD-pwd}`"
+ GCJ="$dir/gcj -B`${PWDCMD-pwd}`/ -B$dir/"
else
CANADIAN=yes
NULL_TARGET=yes
- GCJ="gcj -B`pwd`/"
+ GCJ="gcj -B`${PWDCMD-pwd}`/"
fi
fi
# We must search the source tree for java.lang, since we still don't
# have libgcj.jar nor java/lang/*.class
GCJ_SAVE_CPPFLAGS=$CPPFLAGS
-CPPFLAGS="$CPPFLAGS -I`pwd` -I`cd $srcdir && pwd`"
+CPPFLAGS="$CPPFLAGS -I`${PWDCMD-pwd}` -I`cd $srcdir && ${PWDCMD-pwd}`"
# Since some classes depend on this one, we need its source available
# before we can do any GCJ compilation test :-(
# Extract the first word of "${ac_tool_prefix}gcj", so it can be a program name with args.
set dummy ${ac_tool_prefix}gcj; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5375: checking for $ac_word" >&5
+echo "configure:5464: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCJ'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gcj", so it can be a program name with args.
set dummy gcj; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:5407: checking for $ac_word" >&5
+echo "configure:5496: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_GCJ'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
CPPFLAGS=$GCJ_SAVE_CPPFLAGS
echo $ac_n "checking size of void *""... $ac_c" 1>&6
-echo "configure:5469: checking size of void *" >&5
+echo "configure:5558: checking size of void *" >&5
if eval "test \"`echo '$''{'ac_cv_sizeof_void_p'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_size in 4 8 1 2 16 12 ; do # List sizes in rough order of prevalence.
cat > conftest.$ac_ext <<EOF
-#line 5475 "configure"
+#line 5564 "configure"
#include "confdefs.h"
#include "confdefs.h"
#include <sys/types.h>
switch (0) case 0: case (sizeof (void *) == $ac_size):;
; return 0; }
EOF
-if { (eval echo configure:5485: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5574: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_sizeof_void_p=$ac_size
else
ZLIBS=
-ZDEPS=
+SYS_ZLIBS=
ZINCS=
-if test "x$ZLIBSPEC" = "x-lzgcj"; then
- # We include the path to the zlib build directory.
- # See Makefile.am to understand why.
- ZDEPS='$(top_builddir)/../zlib/libzgcj.la'
- ZLIBS="$ZDEPS -L\$(here)/../zlib/$libsubdir"
+
+if test -z "$ZLIBSPEC"; then
+ # Use zlib from the GCC tree.
ZINCS='-I$(top_srcdir)/../zlib'
+ ZLIBS=../zlib/libzgcj_convenience.la
else
- ZLIBS="$ZLIBSPEC"
+ # System's zlib.
+ SYS_ZLIBS="$ZLIBSPEC"
fi
+
if test "$CANADIAN" = yes; then
CANADIAN_TRUE=
CANADIAN_FALSE='#'
+# Determine gcj version number.
+
+gcjversion=`$GCJ -v 2>&1 | sed -n 's/^.*version \([^ ]*\).*$/\1/p'`
+
+GCJVERSION=$gcjversion
+
+cat >> confdefs.h <<EOF
+#define GCJVERSION "$GCJVERSION"
+EOF
+
+
echo $ac_n "checking for g++ -ffloat-store bug""... $ac_c" 1>&6
-echo "configure:5576: checking for g++ -ffloat-store bug" >&5
+echo "configure:5677: checking for g++ -ffloat-store bug" >&5
save_CFLAGS="$CFLAGS"
CFLAGS="-x c++ -O2 -ffloat-store"
cat > conftest.$ac_ext <<EOF
-#line 5580 "configure"
+#line 5681 "configure"
#include "confdefs.h"
#include <math.h>
int main() {
; return 0; }
EOF
-if { (eval echo configure:5587: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5688: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
echo "$ac_t""no" 1>&6
else
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5607: checking for $ac_hdr" >&5
+echo "configure:5708: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5612 "configure"
+#line 5713 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5617: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5718: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5647: checking for $ac_hdr" >&5
+echo "configure:5748: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5652 "configure"
+#line 5753 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5657: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5758: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5687: checking for $ac_hdr" >&5
+echo "configure:5788: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5692 "configure"
+#line 5793 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5697: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5798: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
done
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:5733: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:5834: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5738 "configure"
+#line 5839 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:5754: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:5855: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:5776: checking for ANSI C header files" >&5
+echo "configure:5877: checking for ANSI C header files" >&5
if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5781 "configure"
+#line 5882 "configure"
#include "confdefs.h"
#include <stdlib.h>
#include <stdarg.h>
#include <float.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5789: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:5890: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if test $ac_cv_header_stdc = yes; then
# SunOS 4.x string.h does not declare mem*, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 5806 "configure"
+#line 5907 "configure"
#include "confdefs.h"
#include <string.h>
EOF
if test $ac_cv_header_stdc = yes; then
# ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
cat > conftest.$ac_ext <<EOF
-#line 5824 "configure"
+#line 5925 "configure"
#include "confdefs.h"
#include <stdlib.h>
EOF
:
else
cat > conftest.$ac_ext <<EOF
-#line 5845 "configure"
+#line 5946 "configure"
#include "confdefs.h"
#include <ctype.h>
#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
exit (0); }
EOF
-if { (eval echo configure:5856: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:5957: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
:
else
fi
echo $ac_n "checking for ssize_t""... $ac_c" 1>&6
-echo "configure:5880: checking for ssize_t" >&5
+echo "configure:5981: checking for ssize_t" >&5
if eval "test \"`echo '$''{'ac_cv_type_ssize_t'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5885 "configure"
+#line 5986 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
echo $ac_n "checking for in_addr_t""... $ac_c" 1>&6
-echo "configure:5914: checking for in_addr_t" >&5
+echo "configure:6015: checking for in_addr_t" >&5
cat > conftest.$ac_ext <<EOF
-#line 5916 "configure"
+#line 6017 "configure"
#include "confdefs.h"
#include <sys/types.h>
#if STDC_HEADERS
in_addr_t foo;
; return 0; }
EOF
-if { (eval echo configure:5930: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6031: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_IN_ADDR_T 1
rm -f conftest*
echo $ac_n "checking whether struct ip_mreq is in netinet/in.h""... $ac_c" 1>&6
-echo "configure:5946: checking whether struct ip_mreq is in netinet/in.h" >&5
+echo "configure:6047: checking whether struct ip_mreq is in netinet/in.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 5948 "configure"
+#line 6049 "configure"
#include "confdefs.h"
#include <netinet/in.h>
int main() {
struct ip_mreq mreq;
; return 0; }
EOF
-if { (eval echo configure:5955: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6056: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_STRUCT_IP_MREQ 1
rm -f conftest*
echo $ac_n "checking whether struct ipv6_mreq is in netinet/in.h""... $ac_c" 1>&6
-echo "configure:5971: checking whether struct ipv6_mreq is in netinet/in.h" >&5
+echo "configure:6072: checking whether struct ipv6_mreq is in netinet/in.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 5973 "configure"
+#line 6074 "configure"
#include "confdefs.h"
#include <netinet/in.h>
int main() {
struct ipv6_mreq mreq6;
; return 0; }
EOF
-if { (eval echo configure:5980: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6081: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_STRUCT_IPV6_MREQ 1
rm -f conftest*
echo $ac_n "checking whether struct sockaddr_in6 is in netinet/in.h""... $ac_c" 1>&6
-echo "configure:5996: checking whether struct sockaddr_in6 is in netinet/in.h" >&5
+echo "configure:6097: checking whether struct sockaddr_in6 is in netinet/in.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 5998 "configure"
+#line 6099 "configure"
#include "confdefs.h"
#include <netinet/in.h>
int main() {
struct sockaddr_in6 addr6;
; return 0; }
EOF
-if { (eval echo configure:6005: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6106: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_INET6 1
rm -f conftest*
echo $ac_n "checking for socklen_t in sys/socket.h""... $ac_c" 1>&6
-echo "configure:6021: checking for socklen_t in sys/socket.h" >&5
+echo "configure:6122: checking for socklen_t in sys/socket.h" >&5
cat > conftest.$ac_ext <<EOF
-#line 6023 "configure"
+#line 6124 "configure"
#include "confdefs.h"
#define _POSIX_PII_SOCKET
#include <sys/types.h>
socklen_t x = 5;
; return 0; }
EOF
-if { (eval echo configure:6032: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6133: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_SOCKLEN_T 1
rm -f conftest*
echo $ac_n "checking for tm_gmtoff in struct tm""... $ac_c" 1>&6
-echo "configure:6048: checking for tm_gmtoff in struct tm" >&5
+echo "configure:6149: checking for tm_gmtoff in struct tm" >&5
cat > conftest.$ac_ext <<EOF
-#line 6050 "configure"
+#line 6151 "configure"
#include "confdefs.h"
#include <time.h>
int main() {
struct tm tim; tim.tm_gmtoff = 0;
; return 0; }
EOF
-if { (eval echo configure:6057: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6158: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define STRUCT_TM_HAS_GMTOFF 1
rm -rf conftest*
echo "$ac_t""no" 1>&6
echo $ac_n "checking for global timezone variable""... $ac_c" 1>&6
-echo "configure:6070: checking for global timezone variable" >&5
- cat > conftest.$ac_ext <<EOF
-#line 6072 "configure"
+echo "configure:6171: checking for global timezone variable" >&5
+ cat > conftest.$ac_ext <<EOF
+#line 6173 "configure"
#include "confdefs.h"
#include <time.h>
int main() {
-long z2 = timezone;
+void i(){long z2 = 2*timezone;}
; return 0; }
EOF
-if { (eval echo configure:6079: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:6180: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
cat >> confdefs.h <<\EOF
#define HAVE_TIMEZONE 1
cat conftest.$ac_ext >&5
rm -rf conftest*
echo "$ac_t""no" 1>&6
+ echo $ac_n "checking for global _timezone variable""... $ac_c" 1>&6
+echo "configure:6193: checking for global _timezone variable" >&5
+ cat > conftest.$ac_ext <<EOF
+#line 6195 "configure"
+#include "confdefs.h"
+#include <time.h>
+int main() {
+long z2 = _timezone;
+; return 0; }
+EOF
+if { (eval echo configure:6202: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ cat >> confdefs.h <<\EOF
+#define HAVE_UNDERSCORE_TIMEZONE 1
+EOF
+
+ echo "$ac_t""yes" 1>&6
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ echo "$ac_t""no" 1>&6
+fi
+rm -f conftest*
fi
rm -f conftest*
fi
# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works
# for constant arguments. Useless!
echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6
-echo "configure:6099: checking for working alloca.h" >&5
+echo "configure:6224: checking for working alloca.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6104 "configure"
+#line 6229 "configure"
#include "confdefs.h"
#include <alloca.h>
int main() {
char *p = alloca(2 * sizeof(int));
; return 0; }
EOF
-if { (eval echo configure:6111: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6236: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_header_alloca_h=yes
else
fi
echo $ac_n "checking for alloca""... $ac_c" 1>&6
-echo "configure:6132: checking for alloca" >&5
+echo "configure:6257: checking for alloca" >&5
if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6137 "configure"
+#line 6262 "configure"
#include "confdefs.h"
#ifdef __GNUC__
char *p = (char *) alloca(1);
; return 0; }
EOF
-if { (eval echo configure:6165: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6290: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_cv_func_alloca_works=yes
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:6197: checking whether alloca needs Cray hooks" >&5
+echo "configure:6322: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6202 "configure"
+#line 6327 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:6227: checking for $ac_func" >&5
+echo "configure:6352: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6232 "configure"
+#line 6357 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:6255: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6380: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:6282: checking stack direction for C alloca" >&5
+echo "configure:6407: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 6290 "configure"
+#line 6415 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:6309: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:6434: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
# Extract the first word of "$ac_prog", so it can be a program name with args.
set dummy $ac_prog; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:6336: checking for $ac_word" >&5
+echo "configure:6461: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_PERL'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
i?86-*-linux*)
SIGNAL_HANDLER=include/i386-signal.h
;;
- sparc-sun-solaris*)
+ sparc*-sun-solaris*)
SIGNAL_HANDLER=include/sparc-signal.h
;;
# ia64-*)
# SYSDEP_SOURCES=sysdep/ia64.c
# test -d sysdep || mkdir sysdep
# ;;
+ ia64-*-linux*)
+ SIGNAL_HANDLER=include/dwarf2-signal.h
+ ;;
powerpc-*-linux*)
SIGNAL_HANDLER=include/dwarf2-signal.h
;;
alpha*-*-linux*)
SIGNAL_HANDLER=include/dwarf2-signal.h
;;
+ s390*-*-linux*)
+ SIGNAL_HANDLER=include/s390-signal.h
+ ;;
+ sparc*-*-linux*)
+ SIGNAL_HANDLER=include/dwarf2-signal.h
+ ;;
*mingw*)
SIGNAL_HANDLER=include/win32-signal.h
;;
# Uses ac_ vars as temps to allow command line to override cache and checks.
# --without-x overrides everything else, but does not touch the cache.
echo $ac_n "checking for X""... $ac_c" 1>&6
-echo "configure:6414: checking for X" >&5
+echo "configure:6548: checking for X" >&5
# Check whether --with-x or --without-x was given.
if test "${with_x+set}" = set; then
# First, try using that file with no special directory specified.
cat > conftest.$ac_ext <<EOF
-#line 6476 "configure"
+#line 6610 "configure"
#include "confdefs.h"
#include <$x_direct_test_include>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:6481: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:6615: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_save_LIBS="$LIBS"
LIBS="-l$x_direct_test_library $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6550 "configure"
+#line 6684 "configure"
#include "confdefs.h"
int main() {
${x_direct_test_function}()
; return 0; }
EOF
-if { (eval echo configure:6557: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6691: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
LIBS="$ac_save_LIBS"
# We can link X programs with no special library path.
case "`(uname -sr) 2>/dev/null`" in
"SunOS 5"*)
echo $ac_n "checking whether -R must be followed by a space""... $ac_c" 1>&6
-echo "configure:6663: checking whether -R must be followed by a space" >&5
+echo "configure:6797: checking whether -R must be followed by a space" >&5
ac_xsave_LIBS="$LIBS"; LIBS="$LIBS -R$x_libraries"
cat > conftest.$ac_ext <<EOF
-#line 6666 "configure"
+#line 6800 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:6673: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6807: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_R_nospace=yes
else
else
LIBS="$ac_xsave_LIBS -R $x_libraries"
cat > conftest.$ac_ext <<EOF
-#line 6689 "configure"
+#line 6823 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:6696: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6830: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
ac_R_space=yes
else
# libraries were built with DECnet support. And karl@cs.umb.edu says
# the Alpha needs dnet_stub (dnet does not exist).
echo $ac_n "checking for dnet_ntoa in -ldnet""... $ac_c" 1>&6
-echo "configure:6728: checking for dnet_ntoa in -ldnet" >&5
+echo "configure:6862: checking for dnet_ntoa in -ldnet" >&5
ac_lib_var=`echo dnet'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldnet $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6736 "configure"
+#line 6870 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dnet_ntoa()
; return 0; }
EOF
-if { (eval echo configure:6747: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6881: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if test $ac_cv_lib_dnet_dnet_ntoa = no; then
echo $ac_n "checking for dnet_ntoa in -ldnet_stub""... $ac_c" 1>&6
-echo "configure:6769: checking for dnet_ntoa in -ldnet_stub" >&5
+echo "configure:6903: checking for dnet_ntoa in -ldnet_stub" >&5
ac_lib_var=`echo dnet_stub'_'dnet_ntoa | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-ldnet_stub $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6777 "configure"
+#line 6911 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
dnet_ntoa()
; return 0; }
EOF
-if { (eval echo configure:6788: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6922: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# The nsl library prevents programs from opening the X display
# on Irix 5.2, according to dickey@clark.net.
echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:6817: checking for gethostbyname" >&5
+echo "configure:6951: checking for gethostbyname" >&5
if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6822 "configure"
+#line 6956 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char gethostbyname(); below. */
; return 0; }
EOF
-if { (eval echo configure:6845: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:6979: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_gethostbyname=yes"
else
if test $ac_cv_func_gethostbyname = no; then
echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
-echo "configure:6866: checking for gethostbyname in -lnsl" >&5
+echo "configure:7000: checking for gethostbyname in -lnsl" >&5
ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6874 "configure"
+#line 7008 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gethostbyname()
; return 0; }
EOF
-if { (eval echo configure:6885: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7019: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# -lsocket must be given before -lnsl if both are needed.
# We assume that if connect needs -lnsl, so does gethostbyname.
echo $ac_n "checking for connect""... $ac_c" 1>&6
-echo "configure:6915: checking for connect" >&5
+echo "configure:7049: checking for connect" >&5
if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 6920 "configure"
+#line 7054 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char connect(); below. */
; return 0; }
EOF
-if { (eval echo configure:6943: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7077: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_connect=yes"
else
if test $ac_cv_func_connect = no; then
echo $ac_n "checking for connect in -lsocket""... $ac_c" 1>&6
-echo "configure:6964: checking for connect in -lsocket" >&5
+echo "configure:7098: checking for connect in -lsocket" >&5
ac_lib_var=`echo socket'_'connect | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 6972 "configure"
+#line 7106 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
connect()
; return 0; }
EOF
-if { (eval echo configure:6983: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7117: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# gomez@mi.uni-erlangen.de says -lposix is necessary on A/UX.
echo $ac_n "checking for remove""... $ac_c" 1>&6
-echo "configure:7007: checking for remove" >&5
+echo "configure:7141: checking for remove" >&5
if eval "test \"`echo '$''{'ac_cv_func_remove'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7012 "configure"
+#line 7146 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char remove(); below. */
; return 0; }
EOF
-if { (eval echo configure:7035: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7169: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_remove=yes"
else
if test $ac_cv_func_remove = no; then
echo $ac_n "checking for remove in -lposix""... $ac_c" 1>&6
-echo "configure:7056: checking for remove in -lposix" >&5
+echo "configure:7190: checking for remove in -lposix" >&5
ac_lib_var=`echo posix'_'remove | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lposix $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7064 "configure"
+#line 7198 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
remove()
; return 0; }
EOF
-if { (eval echo configure:7075: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7209: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# BSDI BSD/OS 2.1 needs -lipc for XOpenDisplay.
echo $ac_n "checking for shmat""... $ac_c" 1>&6
-echo "configure:7099: checking for shmat" >&5
+echo "configure:7233: checking for shmat" >&5
if eval "test \"`echo '$''{'ac_cv_func_shmat'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 7104 "configure"
+#line 7238 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char shmat(); below. */
; return 0; }
EOF
-if { (eval echo configure:7127: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7261: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_shmat=yes"
else
if test $ac_cv_func_shmat = no; then
echo $ac_n "checking for shmat in -lipc""... $ac_c" 1>&6
-echo "configure:7148: checking for shmat in -lipc" >&5
+echo "configure:7282: checking for shmat in -lipc" >&5
ac_lib_var=`echo ipc'_'shmat | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lipc $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7156 "configure"
+#line 7290 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
shmat()
; return 0; }
EOF
-if { (eval echo configure:7167: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7301: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
# libraries we check for below, so use a different variable.
# --interran@uluru.Stanford.EDU, kb@cs.umb.edu.
echo $ac_n "checking for IceConnectionNumber in -lICE""... $ac_c" 1>&6
-echo "configure:7200: checking for IceConnectionNumber in -lICE" >&5
+echo "configure:7334: checking for IceConnectionNumber in -lICE" >&5
ac_lib_var=`echo ICE'_'IceConnectionNumber | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lICE $X_EXTRA_LIBS $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 7208 "configure"
+#line 7342 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
IceConnectionNumber()
; return 0; }
EOF
-if { (eval echo configure:7219: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:7353: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
-here=`pwd`
+here=`${PWDCMD-pwd}`
# We get this from the environment.
s%@THREADDEPS@%$THREADDEPS%g
s%@THREADOBJS@%$THREADOBJS%g
s%@THREADSPEC@%$THREADSPEC%g
+s%@THREADLDFLAGS@%$THREADLDFLAGS%g
s%@HASH_SYNC_SPEC@%$HASH_SYNC_SPEC%g
s%@USING_GCC_TRUE@%$USING_GCC_TRUE%g
s%@USING_GCC_FALSE@%$USING_GCC_FALSE%g
+s%@tool_include_dir@%$tool_include_dir%g
+s%@gcc_version@%$gcc_version%g
s%@LIBICONV@%$LIBICONV%g
s%@GCJ@%$GCJ%g
s%@GCJFLAGS@%$GCJFLAGS%g
s%@ZLIBS@%$ZLIBS%g
-s%@ZDEPS@%$ZDEPS%g
+s%@SYS_ZLIBS@%$SYS_ZLIBS%g
s%@ZINCS@%$ZINCS%g
s%@DIVIDESPEC@%$DIVIDESPEC%g
+s%@CHECKREFSPEC@%$CHECKREFSPEC%g
s%@EXCEPTIONSPEC@%$EXCEPTIONSPEC%g
s%@CANADIAN_TRUE@%$CANADIAN_TRUE%g
s%@CANADIAN_FALSE@%$CANADIAN_FALSE%g
s%@NEEDS_DATA_START_FALSE@%$NEEDS_DATA_START_FALSE%g
s%@GCC_UNWIND_INCLUDE@%$GCC_UNWIND_INCLUDE%g
s%@AM_RUNTESTFLAGS@%$AM_RUNTESTFLAGS%g
+s%@GCJVERSION@%$GCJVERSION%g
s%@ALLOCA@%$ALLOCA%g
s%@PERL@%$PERL%g
s%@SYSDEP_SOURCES@%$SYSDEP_SOURCES%g
EOF
cat >> $CONFIG_STATUS <<EOF
-ac_sources="include/$PLATFORMH java/io/natFile${PLATFORM}.cc java/io/natFileDescriptor${PLATFORM}.cc java/lang/${PLATFORM}Process.java java/lang/nat${PLATFORM}Process.cc include/$GCHDR include/$THREADH $SIGNAL_HANDLER"
-ac_dests="include/platform.h java/io/natFile.cc java/io/natFileDescriptor.cc java/lang/ConcreteProcess.java java/lang/natConcreteProcess.cc include/java-gc.h include/java-threads.h include/java-signal.h"
+ac_sources="include/$PLATFORMH java/io/natFile${FILE-${PLATFORM}}.cc java/io/natFileDescriptor${FILE-${PLATFORM}}.cc java/lang/${PLATFORM}Process.java java/lang/nat${PLATFORM}Process.cc include/$GCHDR include/$THREADH sysdep/$sysdeps_dir/locks.h $SIGNAL_HANDLER"
+ac_dests="include/platform.h java/io/natFile.cc java/io/natFileDescriptor.cc java/lang/ConcreteProcess.java java/lang/natConcreteProcess.cc include/java-gc.h include/java-threads.h sysdep/locks.h include/java-signal.h"
EOF
cat >> $CONFIG_STATUS <<\EOF
# Only add multilib support code if we just rebuilt top-level Makefile.
case " $CONFIG_FILES " in
*" Makefile "*)
+ LD="${ORIGINAL_LD_FOR_MULTILIBS}"
ac_file=Makefile . ${libgcj_basedir}/../config-ml.in
;;
esac
# Make subdirectories and `.d' files. Look in both srcdir and
# builddir for the .java files.
-h=`pwd`
+h=`${PWDCMD-pwd}`
: > deps.mk
( (cd $srcdir && find . \( -name '*.java' -o -name '*.cc' \) -print) ;
find . \( -name '*.java' -o -name '*.cc' \) -print) | \
OSDN Git Service
