dnl PARTICULAR PURPOSE.
sinclude(../config/accross.m4)
-
-AC_DEFUN(LIBGCJ_CONFIGURE,
-[
-dnl Default to --enable-multilib
-AC_ARG_ENABLE(multilib,
-[ --enable-multilib build many library versions (default)],
-[case "${enableval}" in
- yes) multilib=yes ;;
- no) multilib=no ;;
- *) AC_MSG_ERROR(bad value ${enableval} for multilib option) ;;
- esac], [multilib=yes])dnl
-
-dnl We may get other options which we don't document:
-dnl --with-target-subdir, --with-multisrctop, --with-multisubdir
-
-# When building with srcdir == objdir, links to the source files will
-# be created in directories within the target_subdir. We have to
-# adjust toplevel_srcdir accordingly, so that configure finds
-# install-sh and other auxiliary files that live in the top-level
-# source directory.
-if test "${srcdir}" = "."; then
- if test -z "${with_target_subdir}"; then
- toprel=".."
- else
- if test "${with_target_subdir}" != "."; then
- toprel="${with_multisrctop}../.."
- else
- toprel="${with_multisrctop}.."
- fi
- fi
-else
- toprel=".."
-fi
-
-libgcj_basedir=$srcdir/$toprel/$1/libjava
-AC_SUBST(libgcj_basedir)
-
-AC_CONFIG_AUX_DIR(${srcdir}/$toprel)
-if :; then :; else
- # This overrides the previous occurrence for automake, but not for
- # autoconf, which is exactly what we want.
- AC_CONFIG_AUX_DIR(..)
-fi
-
-# This works around an automake problem.
-mkinstalldirs="`cd $ac_aux_dir && ${PWDCMD-pwd}`/mkinstalldirs"
-AC_SUBST(mkinstalldirs)
-
-AC_CANONICAL_SYSTEM
-
-dnl This shouldn't be needed, as long as top-level dependencies are
-dnl defined correctly and shared-library paths are set up so that
-dnl execution tests succeed. FIXME.
-define([AC_PROG_CC_WORKS],[])
-define([AC_PROG_CXX_WORKS],[])
-
-AC_PROG_CC
-
-# We use the libstdc++-v3 version of LIB_AC_PROG_CXX, but use
-# glibjava_CXX instead of glibcpp_CXX. That's because we're passed a
-# different definition of CXX than other directories, since we don't
-# depend on libstdc++-v3 having already been built.
-AC_DEFUN(LIB_AC_PROG_CXX,
-[AC_BEFORE([$0], [AC_PROG_CXXCPP])dnl
-dnl Fool anybody using AC_PROG_CXX.
-AC_PROVIDE([AC_PROG_CXX])
-# Use glibjava_CXX so that we do not cause CXX to be cached with the
-# flags that come in CXX while configuring libjava. They're different
-# from those used for all other target libraries. If CXX is set in
-# the environment, respect that here.
-glibjava_CXX=$CXX
-AC_CHECK_PROGS(glibjava_CXX, $CCC c++ g++ gcc CC cxx cc++, gcc)
-AC_SUBST(CXX)
-CXX=$glibjava_CXX
-test -z "$glibjava_CXX" && AC_MSG_ERROR([no acceptable c++ found in \$PATH])
-
-AC_PROG_CXX_GNU
-
-if test $ac_cv_prog_gxx = yes; then
- GXX=yes
-dnl Check whether -g works, even if CXXFLAGS is set, in case the package
-dnl plays around with CXXFLAGS (such as to build both debugging and
-dnl normal versions of a library), tasteless as that idea is.
- ac_test_CXXFLAGS="${CXXFLAGS+set}"
- ac_save_CXXFLAGS="$CXXFLAGS"
- CXXFLAGS=
- AC_PROG_CXX_G
- if test "$ac_test_CXXFLAGS" = set; then
- CXXFLAGS="$ac_save_CXXFLAGS"
- elif test $ac_cv_prog_cxx_g = yes; then
- CXXFLAGS="-g -O2"
- else
- CXXFLAGS="-O2"
- fi
-else
- GXX=
- test "${CXXFLAGS+set}" = set || CXXFLAGS="-g"
-fi
-])
-
-LIB_AC_PROG_CXX
-
-dnl version is pulled out to make it a bit easier to change using sed.
-version=0.0.7
-dnl Still use "libjava" here to placate dejagnu.
-AM_INIT_AUTOMAKE(libjava, $version)
-
-# AC_CHECK_TOOL does AC_REQUIRE (AC_CANONICAL_BUILD). If we don't
-# run it explicitly here, it will be run implicitly before
-# LIBGCJ_CONFIGURE, which doesn't work because that means that it will
-# be run before AC_CANONICAL_HOST.
-AC_CANONICAL_BUILD
-
-AC_CHECK_TOOL(AS, as)
-AC_CHECK_TOOL(AR, ar)
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-
-AC_PROG_INSTALL
-
-AM_MAINTAINER_MODE
-
-AC_EXEEXT
-
-# configure.host sets the following important variables
-# libgcj_cflags - host specific C compiler flags
-# libgcj_cxxflags - host specific C++ compiler flags
-# libgcj_javaflags - host specific Java compiler flags
-
-libgcj_cflags=
-libgcj_cxxflags=
-libgcj_javaflags=
-
-. [$]{srcdir}/configure.host
-
-LIBGCJ_CFLAGS="[$]{libgcj_cflags}"
-LIBGCJ_CXXFLAGS="[$]{libgcj_cxxflags}"
-LIBGCJ_JAVAFLAGS="[$]{libgcj_javaflags}"
-AC_SUBST(LIBGCJ_CFLAGS)
-AC_SUBST(LIBGCJ_CXXFLAGS)
-AC_SUBST(LIBGCJ_JAVAFLAGS)
-])dnl
+sinclude(../config/acx.m4)
sinclude(../libtool.m4)
dnl The lines below arrange for aclocal not to bring libtool.m4
# serial 2
AC_DEFUN([AM_LC_MESSAGES],
- [if test $ac_cv_header_locale_h = yes; then
+ [AC_CHECK_HEADERS(locale.h)
+ if test $ac_cv_header_locale_h = yes; then
AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
[AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
fi[]dnl
])# CHECK_FOR_BROKEN_MINGW_LD
+dnl PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not)
+dnl defines GSTUFF_LIBS, GSTUFF_CFLAGS, see pkg-config man page
+dnl also defines GSTUFF_PKG_ERRORS on error
+AC_DEFUN(PKG_CHECK_MODULES, [
+ succeeded=no
+
+ if test -z "$PKG_CONFIG"; then
+ AC_PATH_PROG(PKG_CONFIG, pkg-config, no)
+ fi
+
+ if test "$PKG_CONFIG" = "no" ; then
+ echo "*** The pkg-config script could not be found. Make sure it is"
+ echo "*** in your path, or set the PKG_CONFIG environment variable"
+ echo "*** to the full path to pkg-config."
+ echo "*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config."
+ else
+ PKG_CONFIG_MIN_VERSION=0.9.0
+ if $PKG_CONFIG --atleast-pkgconfig-version $PKG_CONFIG_MIN_VERSION; then
+ AC_MSG_CHECKING(for $2)
+
+ if $PKG_CONFIG --exists "$2" ; then
+ AC_MSG_RESULT(yes)
+ succeeded=yes
+
+ AC_MSG_CHECKING($1_CFLAGS)
+ $1_CFLAGS=`$PKG_CONFIG --cflags "$2"`
+ AC_MSG_RESULT($$1_CFLAGS)
+
+ AC_MSG_CHECKING($1_LIBS)
+ $1_LIBS=`$PKG_CONFIG --libs "$2"`
+ AC_MSG_RESULT($$1_LIBS)
+ else
+ $1_CFLAGS=""
+ $1_LIBS=""
+ ## If we have a custom action on failure, don't print errors, but
+ ## do set a variable so people can do so.
+ $1_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"`
+ ifelse([$4], ,echo $$1_PKG_ERRORS,)
+ fi
+
+ AC_SUBST($1_CFLAGS)
+ AC_SUBST($1_LIBS)
+ else
+ echo "*** Your version of pkg-config is too old. You need version $PKG_CONFIG_MIN_VERSION or newer."
+ echo "*** See http://www.freedesktop.org/software/pkgconfig"
+ fi
+ fi
+
+ if test $succeeded = yes; then
+ ifelse([$3], , :, [$3])
+ else
+ ifelse([$4], , AC_MSG_ERROR([Library requirements ($2) not met; consider adjusting the PKG_CONFIG_PATH environment variable if your libraries are in a nonstandard prefix so pkg-config can find them.]), [$4])
+ fi
+])
+
+
+
# Do all the work for Automake. This macro actually does too much --
# some checks are only needed if your package does certain things.
# But this isn't really a big deal.
done<<>>dnl>>)
changequote([,]))])
-# Configure paths for GTK+
-# Owen Taylor 97-11-3
-
-dnl AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
-dnl Test for GTK, and define GTK_CFLAGS and GTK_LIBS
-dnl
-AC_DEFUN(AM_PATH_GTK,
-[dnl
-dnl Get the cflags and libraries from the gtk-config script
-dnl
-AC_ARG_WITH(gtk-prefix,[ --with-gtk-prefix=PFX Prefix where GTK is installed (optional)],
- gtk_config_prefix="$withval", gtk_config_prefix="")
-AC_ARG_WITH(gtk-exec-prefix,[ --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)],
- gtk_config_exec_prefix="$withval", gtk_config_exec_prefix="")
-AC_ARG_ENABLE(gtktest, [ --disable-gtktest Do not try to compile and run a test GTK program],
- , enable_gtktest=yes)
-
- for module in . $4
- do
- case "$module" in
- gthread)
- gtk_config_args="$gtk_config_args gthread"
- ;;
- esac
- done
-
- if test x$gtk_config_exec_prefix != x ; then
- gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
- if test x${GTK_CONFIG+set} != xset ; then
- GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
- fi
- fi
- if test x$gtk_config_prefix != x ; then
- gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
- if test x${GTK_CONFIG+set} != xset ; then
- GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
- fi
- fi
-
- AC_PATH_PROG(GTK_CONFIG, gtk-config, no)
- min_gtk_version=ifelse([$1], ,0.99.7,$1)
- AC_MSG_CHECKING(for GTK - version >= $min_gtk_version)
- no_gtk=""
- if test "$GTK_CONFIG" = "no" ; then
- no_gtk=yes
- else
- GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
- GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
- gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
- if test "x$enable_gtktest" = "xyes" ; then
- ac_save_CFLAGS="$CFLAGS"
- ac_save_LIBS="$LIBS"
- CFLAGS="$CFLAGS $GTK_CFLAGS"
- LIBS="$GTK_LIBS $LIBS"
-dnl
-dnl Now check if the installed GTK is sufficiently new. (Also sanity
-dnl checks the results of gtk-config to some extent
-dnl
- rm -f conf.gtktest
- AC_TRY_RUN([
-#include <gtk/gtk.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-int
-main ()
-{
- int major, minor, micro;
- char *tmp_version;
-
- system ("touch conf.gtktest");
-
- /* HP/UX 9 (%@#!) writes to sscanf strings */
- tmp_version = g_strdup("$min_gtk_version");
- if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
- printf("%s, bad version string\n", "$min_gtk_version");
- exit(1);
- }
-
- if ((gtk_major_version != $gtk_config_major_version) ||
- (gtk_minor_version != $gtk_config_minor_version) ||
- (gtk_micro_version != $gtk_config_micro_version))
- {
- printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n",
- $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
- gtk_major_version, gtk_minor_version, gtk_micro_version);
- printf ("*** was found! If gtk-config was correct, then it is best\n");
- printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
- printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
- printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
- printf("*** required on your system.\n");
- printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
- printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
- printf("*** before re-running configure\n");
- }
-#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
- else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
- (gtk_minor_version != GTK_MINOR_VERSION) ||
- (gtk_micro_version != GTK_MICRO_VERSION))
- {
- printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
- GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
- printf("*** library (version %d.%d.%d)\n",
- gtk_major_version, gtk_minor_version, gtk_micro_version);
- }
-#endif /* defined (GTK_MAJOR_VERSION) ... */
- else
- {
- if ((gtk_major_version > major) ||
- ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
- ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
- {
- return 0;
- }
- else
- {
- printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
- gtk_major_version, gtk_minor_version, gtk_micro_version);
- printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
- major, minor, micro);
- printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
- printf("***\n");
- printf("*** If you have already installed a sufficiently new version, this error\n");
- printf("*** probably means that the wrong copy of the gtk-config shell script is\n");
- printf("*** being found. The easiest way to fix this is to remove the old version\n");
- printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n");
- printf("*** correct copy of gtk-config. (In this case, you will have to\n");
- printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
- printf("*** so that the correct libraries are found at run-time))\n");
- }
- }
- return 1;
-}
-],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
- if test "x$no_gtk" = x ; then
- AC_MSG_RESULT(yes)
- ifelse([$2], , :, [$2])
- else
- AC_MSG_RESULT(no)
- if test "$GTK_CONFIG" = "no" ; then
- echo "*** The gtk-config script installed by GTK could not be found"
- echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
- echo "*** your path, or set the GTK_CONFIG environment variable to the"
- echo "*** full path to gtk-config."
- else
- if test -f conf.gtktest ; then
- :
- else
- echo "*** Could not run GTK test program, checking why..."
- CFLAGS="$CFLAGS $GTK_CFLAGS"
- LIBS="$LIBS $GTK_LIBS"
- AC_TRY_LINK([
-#include <gtk/gtk.h>
-#include <stdio.h>
-], [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
- [ echo "*** The test program compiled, but did not run. This usually means"
- echo "*** that the run-time linker is not finding GTK or finding the wrong"
- echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
- echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
- echo "*** to the installed location Also, make sure you have run ldconfig if that"
- echo "*** is required on your system"
- echo "***"
- echo "*** If you have an old version installed, it is best to remove it, although"
- echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
- echo "***"
- echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
- echo "*** came with the system with the command"
- echo "***"
- echo "*** rpm --erase --nodeps gtk gtk-devel" ],
- [ echo "*** The test program failed to compile or link. See the file config.log for the"
- echo "*** exact error that occured. This usually means GTK was incorrectly installed"
- echo "*** or that you have moved GTK since it was installed. In the latter case, you"
- echo "*** may want to edit the gtk-config script: $GTK_CONFIG" ])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
- GTK_CFLAGS=""
- GTK_LIBS=""
- ifelse([$3], , :, [$3])
- fi
- AC_SUBST(GTK_CFLAGS)
- AC_SUBST(GTK_LIBS)
- rm -f conf.gtktest
-])
-
-# Configure paths for GLIB
-# Owen Taylor 97-11-3
-
-dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
-dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or
-dnl gthread is specified in MODULES, pass to glib-config
-dnl
-AC_DEFUN(AM_PATH_GLIB,
-[dnl
-dnl Get the cflags and libraries from the glib-config script
-dnl
-AC_ARG_WITH(glib-prefix,[ --with-glib-prefix=PFX Prefix where GLIB is installed (optional)],
- glib_config_prefix="$withval", glib_config_prefix="")
-AC_ARG_WITH(glib-exec-prefix,[ --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)],
- glib_config_exec_prefix="$withval", glib_config_exec_prefix="")
-AC_ARG_ENABLE(glibtest, [ --disable-glibtest Do not try to compile and run a test GLIB program],
- , enable_glibtest=yes)
-
- if test x$glib_config_exec_prefix != x ; then
- glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
- if test x${GLIB_CONFIG+set} != xset ; then
- GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config
- fi
- fi
- if test x$glib_config_prefix != x ; then
- glib_config_args="$glib_config_args --prefix=$glib_config_prefix"
- if test x${GLIB_CONFIG+set} != xset ; then
- GLIB_CONFIG=$glib_config_prefix/bin/glib-config
- fi
- fi
-
- for module in . $4
- do
- case "$module" in
- gmodule)
- glib_config_args="$glib_config_args gmodule"
- ;;
- gthread)
- glib_config_args="$glib_config_args gthread"
- ;;
- esac
- done
-
- AC_PATH_PROG(GLIB_CONFIG, glib-config, no)
- min_glib_version=ifelse([$1], ,0.99.7,$1)
- AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)
- no_glib=""
- if test "$GLIB_CONFIG" = "no" ; then
- no_glib=yes
- else
- GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags`
- GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs`
- glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
- if test "x$enable_glibtest" = "xyes" ; then
- ac_save_CFLAGS="$CFLAGS"
- ac_save_LIBS="$LIBS"
- CFLAGS="$CFLAGS $GLIB_CFLAGS"
- LIBS="$GLIB_LIBS $LIBS"
-dnl
-dnl Now check if the installed GLIB is sufficiently new. (Also sanity
-dnl checks the results of glib-config to some extent
-dnl
- rm -f conf.glibtest
- AC_TRY_RUN([
-#include <glib.h>
-#include <stdio.h>
-#include <stdlib.h>
-
-int
-main ()
-{
- int major, minor, micro;
- char *tmp_version;
-
- system ("touch conf.glibtest");
-
- /* HP/UX 9 (%@#!) writes to sscanf strings */
- tmp_version = g_strdup("$min_glib_version");
- if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
- printf("%s, bad version string\n", "$min_glib_version");
- exit(1);
- }
-
- if ((glib_major_version != $glib_config_major_version) ||
- (glib_minor_version != $glib_config_minor_version) ||
- (glib_micro_version != $glib_config_micro_version))
- {
- printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n",
- $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
- glib_major_version, glib_minor_version, glib_micro_version);
- printf ("*** was found! If glib-config was correct, then it is best\n");
- printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n");
- printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
- printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
- printf("*** required on your system.\n");
- printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n");
- printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n");
- printf("*** before re-running configure\n");
- }
- else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
- (glib_minor_version != GLIB_MINOR_VERSION) ||
- (glib_micro_version != GLIB_MICRO_VERSION))
- {
- printf("*** GLIB header files (version %d.%d.%d) do not match\n",
- GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
- printf("*** library (version %d.%d.%d)\n",
- glib_major_version, glib_minor_version, glib_micro_version);
- }
- else
- {
- if ((glib_major_version > major) ||
- ((glib_major_version == major) && (glib_minor_version > minor)) ||
- ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
- {
- return 0;
- }
- else
- {
- printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
- glib_major_version, glib_minor_version, glib_micro_version);
- printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
- major, minor, micro);
- printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
- printf("***\n");
- printf("*** If you have already installed a sufficiently new version, this error\n");
- printf("*** probably means that the wrong copy of the glib-config shell script is\n");
- printf("*** being found. The easiest way to fix this is to remove the old version\n");
- printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n");
- printf("*** correct copy of glib-config. (In this case, you will have to\n");
- printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
- printf("*** so that the correct libraries are found at run-time))\n");
- }
- }
- return 1;
-}
-],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
- if test "x$no_glib" = x ; then
- AC_MSG_RESULT(yes)
- ifelse([$2], , :, [$2])
- else
- AC_MSG_RESULT(no)
- if test "$GLIB_CONFIG" = "no" ; then
- echo "*** The glib-config script installed by GLIB could not be found"
- echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in"
- echo "*** your path, or set the GLIB_CONFIG environment variable to the"
- echo "*** full path to glib-config."
- else
- if test -f conf.glibtest ; then
- :
- else
- echo "*** Could not run GLIB test program, checking why..."
- CFLAGS="$CFLAGS $GLIB_CFLAGS"
- LIBS="$LIBS $GLIB_LIBS"
- AC_TRY_LINK([
-#include <glib.h>
-#include <stdio.h>
-], [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
- [ echo "*** The test program compiled, but did not run. This usually means"
- echo "*** that the run-time linker is not finding GLIB or finding the wrong"
- echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
- echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
- echo "*** to the installed location Also, make sure you have run ldconfig if that"
- echo "*** is required on your system"
- echo "***"
- echo "*** If you have an old version installed, it is best to remove it, although"
- echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
- echo "***"
- echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
- echo "*** came with the system with the command"
- echo "***"
- echo "*** rpm --erase --nodeps gtk gtk-devel" ],
- [ echo "*** The test program failed to compile or link. See the file config.log for the"
- echo "*** exact error that occured. This usually means GLIB was incorrectly installed"
- echo "*** or that you have moved GLIB since it was installed. In the latter case, you"
- echo "*** may want to edit the glib-config script: $GLIB_CONFIG" ])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
- GLIB_CFLAGS=""
- GLIB_LIBS=""
- ifelse([$3], , :, [$3])
- fi
- AC_SUBST(GLIB_CFLAGS)
- AC_SUBST(GLIB_LIBS)
- rm -f conf.glibtest
-])
-
-# Configure paths for LIBART
-# Raph Levien 98-11-18
-# stolen from Manish Singh 98-9-30
-# stolen back from Frank Belew
-# stolen from Manish Singh
-# Shamelessly stolen from Owen Taylor
-
-dnl AM_PATH_LIBART([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND]]])
-dnl Test for LIBART, and define LIBART_CFLAGS and LIBART_LIBS
-dnl
-AC_DEFUN(AM_PATH_LIBART,
-[dnl
-dnl Get the cflags and libraries from the libart-config script
-dnl
-AC_ARG_WITH(libart-prefix,[ --with-libart-prefix=PFX Prefix where LIBART is installed (optional)],
- libart_prefix="$withval", libart_prefix="")
-AC_ARG_WITH(libart-exec-prefix,[ --with-libart-exec-prefix=PFX Exec prefix where LIBART is installed (optional)],
- libart_exec_prefix="$withval", libart_exec_prefix="")
-AC_ARG_ENABLE(libarttest, [ --disable-libarttest Do not try to compile and run a test LIBART program],
- , enable_libarttest=yes)
-
- if test x$libart_exec_prefix != x ; then
- libart_args="$libart_args --exec-prefix=$libart_exec_prefix"
- if test x${LIBART_CONFIG+set} != xset ; then
- LIBART_CONFIG=$libart_exec_prefix/bin/libart-config
- fi
- fi
- if test x$libart_prefix != x ; then
- libart_args="$libart_args --prefix=$libart_prefix"
- if test x${LIBART_CONFIG+set} != xset ; then
- LIBART_CONFIG=$libart_prefix/bin/libart-config
- fi
- fi
-
- AC_PATH_PROG(LIBART_CONFIG, libart-config, no)
- min_libart_version=ifelse([$1], ,0.2.5,$1)
- AC_MSG_CHECKING(for LIBART - version >= $min_libart_version)
- no_libart=""
- if test "$LIBART_CONFIG" = "no" ; then
- no_libart=yes
- else
- LIBART_CFLAGS=`$LIBART_CONFIG $libartconf_args --cflags`
- LIBART_LIBS=`$LIBART_CONFIG $libartconf_args --libs`
-
- libart_major_version=`$LIBART_CONFIG $libart_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
- libart_minor_version=`$LIBART_CONFIG $libart_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
- libart_micro_version=`$LIBART_CONFIG $libart_config_args --version | \
- sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
- if test "x$enable_libarttest" = "xyes" ; then
- ac_save_CFLAGS="$CFLAGS"
- ac_save_LIBS="$LIBS"
- CFLAGS="$CFLAGS $LIBART_CFLAGS"
- LIBS="$LIBS $LIBART_LIBS"
-dnl
-dnl Now check if the installed LIBART is sufficiently new. (Also sanity
-dnl checks the results of libart-config to some extent
-dnl
- rm -f conf.libarttest
- AC_TRY_RUN([
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <libart_lgpl/libart.h>
-
-char*
-my_strdup (char *str)
-{
- char *new_str;
-
- if (str)
- {
- new_str = malloc ((strlen (str) + 1) * sizeof(char));
- strcpy (new_str, str);
- }
- else
- new_str = NULL;
-
- return new_str;
-}
-
-int main ()
-{
- int major, minor, micro;
- char *tmp_version;
-
- system ("touch conf.libarttest");
-
- /* HP/UX 9 (%@#!) writes to sscanf strings */
- tmp_version = my_strdup("$min_libart_version");
- if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, µ) != 3) {
- printf("%s, bad version string\n", "$min_libart_version");
- exit(1);
- }
-
- if (($libart_major_version > major) ||
- (($libart_major_version == major) && ($libart_minor_version > minor)) ||
- (($libart_major_version == major) && ($libart_minor_version == minor) && ($libart_micro_version >= micro)))
- {
- return 0;
- }
- else
- {
- printf("\n*** 'libart-config --version' returned %d.%d.%d, but the minimum version\n", $libart_major_version, $libart_minor_version, $libart_micro_version);
- printf("*** of LIBART required is %d.%d.%d. If libart-config is correct, then it is\n", major, minor, micro);
- printf("*** best to upgrade to the required version.\n");
- printf("*** If libart-config was wrong, set the environment variable LIBART_CONFIG\n");
- printf("*** to point to the correct copy of libart-config, and remove the file\n");
- printf("*** config.cache before re-running configure\n");
- return 1;
- }
-}
-
-],, no_libart=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
- if test "x$no_libart" = x ; then
- AC_MSG_RESULT(yes)
- ifelse([$2], , :, [$2])
- else
- AC_MSG_RESULT(no)
- if test "$LIBART_CONFIG" = "no" ; then
- echo "*** The libart-config script installed by LIBART could not be found"
- echo "*** If LIBART was installed in PREFIX, make sure PREFIX/bin is in"
- echo "*** your path, or set the LIBART_CONFIG environment variable to the"
- echo "*** full path to libart-config."
- else
- if test -f conf.libarttest ; then
- :
- else
- echo "*** Could not run LIBART test program, checking why..."
- CFLAGS="$CFLAGS $LIBART_CFLAGS"
- LIBS="$LIBS $LIBART_LIBS"
- AC_TRY_LINK([
-#include <stdio.h>
-#include <libart_lgpl/libart.h>
-], [ return 0; ],
- [ echo "*** The test program compiled, but did not run. This usually means"
- echo "*** that the run-time linker is not finding LIBART or finding the wrong"
- echo "*** version of LIBART. If it is not finding LIBART, you'll need to set your"
- echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
- echo "*** to the installed location Also, make sure you have run ldconfig if that"
- echo "*** is required on your system"
- echo "***"
- echo "*** If you have an old version installed, it is best to remove it, although"
- echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"],
- [ echo "*** The test program failed to compile or link. See the file config.log for the"
- echo "*** exact error that occured. This usually means LIBART was incorrectly installed"
- echo "*** or that you have moved LIBART since it was installed. In the latter case, you"
- echo "*** may want to edit the libart-config script: $LIBART_CONFIG" ])
- CFLAGS="$ac_save_CFLAGS"
- LIBS="$ac_save_LIBS"
- fi
- fi
- LIBART_CFLAGS=""
- LIBART_LIBS=""
- ifelse([$3], , :, [$3])
- fi
- AC_SUBST(LIBART_CFLAGS)
- AC_SUBST(LIBART_LIBS)
- rm -f conf.libarttest
-])
-
OSDN Git Service
