OSDN Git Service

Daily bump.
[pf3gnuchains/gcc-fork.git] / libiberty / configure
index be1fa94..cac9f56 100755 (executable)
@@ -12,7 +12,9 @@ ac_help=
 ac_default_prefix=/usr/local
 # Any additions from configure.in:
 ac_help="$ac_help
-  --with-target-subdir=SUBDIR      Configuring in a subdirectory"
+  --with-target-subdir=SUBDIR      Configuring in a subdirectory for target"
+ac_help="$ac_help
+  --with-build-subdir=SUBDIR       Configuring in a subdirectory for build"
 ac_help="$ac_help
   --with-cross-host=HOST           Configuring with a cross compiler"
 ac_help="$ac_help
@@ -21,6 +23,8 @@ ac_help="$ac_help
   --enable-maintainer-mode
                           enable make rules and dependencies not useful
                           (and sometimes confusing) to the casual installer"
+ac_help="$ac_help
+  --enable-install-libiberty       Install headers for end users"
 
 # Initialize some variables set by options.
 # The variables have the same names as the options, with
@@ -532,12 +536,24 @@ fi
 
 
 
+# This works around the fact that libtool configuration may change LD
+# for this particular configuration, but some shells, instead of
+# keeping the changes in LD private, export them just because LD is
+# exported.  We don't use libtool yet, but some day we might, so...
+ORIGINAL_LD_FOR_MULTILIBS=$LD
+
 # Check whether --with-target-subdir or --without-target-subdir was given.
 if test "${with_target_subdir+set}" = set; then
   withval="$with_target_subdir"
   :
 fi
 
+# Check whether --with-build-subdir or --without-build-subdir was given.
+if test "${with_build_subdir+set}" = set; then
+  withval="$with_build_subdir"
+  :
+fi
+
 # Check whether --with-cross-host or --without-cross-host was given.
 if test "${with_cross_host+set}" = set; then
   withval="$with_cross_host"
@@ -552,7 +568,10 @@ fi
 
 
 if test "${srcdir}" = "."; then
-  if test -z "${with_target_subdir}"; then
+  if test -n "${with_build_subdir}"; then
+    libiberty_topdir="${srcdir}/../.."
+    with_target_subdir=
+  elif test -z "${with_target_subdir}"; then
     libiberty_topdir="${srcdir}/.."
   else
     if test "${with_target_subdir}" != "."; then
@@ -586,7 +605,7 @@ ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
 
 
 echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
-echo "configure:590: checking whether to enable maintainer-specific portions of Makefiles" >&5
+echo "configure:609: checking whether to enable maintainer-specific portions of Makefiles" >&5
     # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
 if test "${enable_maintainer_mode+set}" = set; then
   enableval="$enable_maintainer_mode"
@@ -611,7 +630,7 @@ fi
 # Extract the first word of "makeinfo", so it can be a program name with args.
 set dummy makeinfo; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:615: checking for $ac_word" >&5
+echo "configure:634: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -657,7 +676,7 @@ fi
 # Extract the first word of "perl", so it can be a program name with args.
 set dummy perl; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:661: checking for $ac_word" >&5
+echo "configure:680: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_PERL'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -697,7 +716,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:701: checking host system type" >&5
+echo "configure:720: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -720,7 +739,7 @@ echo "$ac_t""$host" 1>&6
 
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:724: checking build system type" >&5
+echo "configure:743: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -746,7 +765,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:750: checking for $ac_word" >&5
+echo "configure:769: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -778,7 +797,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:782: checking for $ac_word" >&5
+echo "configure:801: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -810,7 +829,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:814: checking for $ac_word" >&5
+echo "configure:833: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -847,7 +866,7 @@ fi
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:851: checking for $ac_word" >&5
+echo "configure:870: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -877,7 +896,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:881: checking for $ac_word" >&5
+echo "configure:900: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -926,7 +945,7 @@ fi
 fi
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:930: checking whether we are using GNU C" >&5
+echo "configure:949: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -935,7 +954,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:939: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:958: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -951,7 +970,7 @@ if test $ac_cv_prog_gcc = yes; then
   ac_save_CFLAGS="$CFLAGS"
   CFLAGS=
   echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:955: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:974: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -981,8 +1000,69 @@ fi
 
 
 
+if test "x$CC" != xcc; then
+  echo $ac_n "checking whether $CC and cc understand -c and -o together""... $ac_c" 1>&6
+echo "configure:1006: checking whether $CC and cc understand -c and -o together" >&5
+else
+  echo $ac_n "checking whether cc understands -c and -o together""... $ac_c" 1>&6
+echo "configure:1009: checking whether cc understands -c and -o together" >&5
+fi
+set dummy $CC; ac_cc="`echo $2 |
+                      sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`"
+if eval "test \"`echo '$''{'ac_cv_prog_cc_${ac_cc}_c_o'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  echo 'foo(){}' > conftest.c
+# Make sure it works both with $CC and with simple cc.
+# We do the test twice because some compilers refuse to overwrite an
+# existing .o file with -o, though they will create one.
+ac_try='${CC-cc} -c conftest.c -o conftest.o 1>&5'
+if { (eval echo configure:1021: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+   test -f conftest.o && { (eval echo configure:1022: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+then
+  eval ac_cv_prog_cc_${ac_cc}_c_o=yes
+  if test "x$CC" != xcc; then
+    # Test first that cc exists at all.
+    if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1027: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+      ac_try='cc -c conftest.c -o conftest.o 1>&5'
+      if { (eval echo configure:1029: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+        test -f conftest.o && { (eval echo configure:1030: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+      then
+        # cc works too.
+        :
+      else
+        # cc exists but doesn't like -o.
+        eval ac_cv_prog_cc_${ac_cc}_c_o=no
+      fi
+    fi
+  fi
+else
+  eval ac_cv_prog_cc_${ac_cc}_c_o=no
+fi
+rm -f conftest*
+
+fi
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = yes"; then
+  echo "$ac_t""yes" 1>&6
+else
+  echo "$ac_t""no" 1>&6
+  cat >> confdefs.h <<\EOF
+#define NO_MINUS_C_MINUS_O 1
+EOF
+
+fi
+
+# autoconf is lame and doesn't give us any substitution variable for this.
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then
+  NO_MINUS_C_MINUS_O=yes
+else
+  OUTPUT_OPTION='-o $@'
+fi
+
+
+
 echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:986: checking for POSIXized ISC" >&5
+echo "configure:1066: checking for POSIXized ISC" >&5
 if test -d /etc/conf/kconfig.d &&
   grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
 then
@@ -1003,12 +1083,12 @@ else
 fi
 
 echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:1007: checking for working const" >&5
+echo "configure:1087: checking for working const" >&5
 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1012 "configure"
+#line 1092 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -1057,7 +1137,7 @@ ccp = (char const *const *) p;
 
 ; return 0; }
 EOF
-if { (eval echo configure:1061: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1141: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_const=yes
 else
@@ -1078,21 +1158,21 @@ EOF
 fi
 
 echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:1082: checking for inline" >&5
+echo "configure:1162: checking for inline" >&5
 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_inline=no
 for ac_kw in inline __inline__ __inline; do
   cat > conftest.$ac_ext <<EOF
-#line 1089 "configure"
+#line 1169 "configure"
 #include "confdefs.h"
 
 int main() {
 } $ac_kw foo() {
 ; return 0; }
 EOF
-if { (eval echo configure:1096: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1176: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_inline=$ac_kw; break
 else
@@ -1135,7 +1215,7 @@ esac
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1139: checking for a BSD compatible install" >&5
+echo "configure:1219: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1196,7 +1276,7 @@ host_makefile_frag=${frag}
 # able to link anything, it had better be able to at least compile
 # something.
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1200: checking how to run the C preprocessor" >&5
+echo "configure:1280: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -1211,13 +1291,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 1215 "configure"
+#line 1295 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1221: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1301: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1228,13 +1308,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 1232 "configure"
+#line 1312 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1238: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1318: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1245,13 +1325,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 1249 "configure"
+#line 1329 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1255: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1335: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -1279,17 +1359,17 @@ for ac_hdr in sys/file.h sys/param.h limits.h stdlib.h string.h unistd.h strings
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1283: checking for $ac_hdr" >&5
+echo "configure:1363: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1288 "configure"
+#line 1368 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1293: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1373: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1316,12 +1396,12 @@ fi
 done
 
 echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:1320: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:1400: checking for sys/wait.h that is POSIX.1 compatible" >&5
 if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1325 "configure"
+#line 1405 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/wait.h>
@@ -1337,7 +1417,7 @@ wait (&s);
 s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
 ; return 0; }
 EOF
-if { (eval echo configure:1341: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1421: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_header_sys_wait_h=yes
 else
@@ -1358,12 +1438,12 @@ EOF
 fi
 
 echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:1362: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:1442: checking whether time.h and sys/time.h may both be included" >&5
 if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1367 "configure"
+#line 1447 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/time.h>
@@ -1372,7 +1452,7 @@ int main() {
 struct tm *tp;
 ; return 0; }
 EOF
-if { (eval echo configure:1376: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1456: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_header_time=yes
 else
@@ -1394,19 +1474,19 @@ fi
 
 
 echo $ac_n "checking whether errno must be declared""... $ac_c" 1>&6
-echo "configure:1398: checking whether errno must be declared" >&5
+echo "configure:1478: checking whether errno must be declared" >&5
 if eval "test \"`echo '$''{'libiberty_cv_declare_errno'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1403 "configure"
+#line 1483 "configure"
 #include "confdefs.h"
 #include <errno.h>
 int main() {
 int x = errno;
 ; return 0; }
 EOF
-if { (eval echo configure:1410: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1490: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   libiberty_cv_declare_errno=no
 else
@@ -1428,12 +1508,12 @@ fi
 
 
 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:1432: checking for ANSI C header files" >&5
+echo "configure:1512: checking for ANSI C header files" >&5
 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1437 "configure"
+#line 1517 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 #include <stdarg.h>
@@ -1441,7 +1521,7 @@ else
 #include <float.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1445: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1525: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1458,7 +1538,7 @@ rm -f conftest*
 if test $ac_cv_header_stdc = yes; then
   # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 1462 "configure"
+#line 1542 "configure"
 #include "confdefs.h"
 #include <string.h>
 EOF
@@ -1476,7 +1556,7 @@ fi
 if test $ac_cv_header_stdc = yes; then
   # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
 cat > conftest.$ac_ext <<EOF
-#line 1480 "configure"
+#line 1560 "configure"
 #include "confdefs.h"
 #include <stdlib.h>
 EOF
@@ -1497,7 +1577,7 @@ if test "$cross_compiling" = yes; then
   :
 else
   cat > conftest.$ac_ext <<EOF
-#line 1501 "configure"
+#line 1581 "configure"
 #include "confdefs.h"
 #include <ctype.h>
 #define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
@@ -1508,7 +1588,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
 exit (0); }
 
 EOF
-if { (eval echo configure:1512: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1592: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   :
 else
@@ -1532,12 +1612,12 @@ EOF
 fi
 
 echo $ac_n "checking for uintptr_t""... $ac_c" 1>&6
-echo "configure:1536: checking for uintptr_t" >&5
+echo "configure:1616: checking for uintptr_t" >&5
 if eval "test \"`echo '$''{'ac_cv_type_uintptr_t'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1541 "configure"
+#line 1621 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #if STDC_HEADERS
@@ -1573,6 +1653,40 @@ EOF
 
 fi
 
+echo $ac_n "checking for pid_t""... $ac_c" 1>&6
+echo "configure:1658: checking for pid_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
+  echo $ac_n "(cached) $ac_c" 1>&6
+else
+  cat > conftest.$ac_ext <<EOF
+#line 1663 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+  egrep "(^|[^a-zA-Z_0-9])pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+  rm -rf conftest*
+  ac_cv_type_pid_t=yes
+else
+  rm -rf conftest*
+  ac_cv_type_pid_t=no
+fi
+rm -f conftest*
+
+fi
+echo "$ac_t""$ac_cv_type_pid_t" 1>&6
+if test $ac_cv_type_pid_t = no; then
+  cat >> confdefs.h <<\EOF
+#define pid_t int
+EOF
+
+fi
+
+
 # This is the list of functions which libiberty will provide if they
 # are not available on the host.
 
@@ -1630,12 +1744,12 @@ if test "x" = "y"; then
   for ac_func in asprintf atexit basename bcmp bcopy bsearch bzero calloc clock
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1634: checking for $ac_func" >&5
+echo "configure:1748: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1639 "configure"
+#line 1753 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -1658,7 +1772,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:1662: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1776: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -1685,12 +1799,12 @@ done
   for ac_func in getcwd getpagesize index insque mkstemps memchr memcmp memcpy
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1689: checking for $ac_func" >&5
+echo "configure:1803: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1694 "configure"
+#line 1808 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -1713,7 +1827,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:1717: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1831: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -1740,12 +1854,12 @@ done
   for ac_func in memmove memset putenv random rename rindex sigsetmask
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1744: checking for $ac_func" >&5
+echo "configure:1858: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1749 "configure"
+#line 1863 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -1768,7 +1882,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:1772: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -1795,12 +1909,12 @@ done
   for ac_func in strcasecmp setenv strchr strdup strncasecmp strrchr strstr
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1799: checking for $ac_func" >&5
+echo "configure:1913: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1804 "configure"
+#line 1918 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -1823,7 +1937,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:1827: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1941: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -1850,12 +1964,12 @@ done
   for ac_func in strtod strtol strtoul tmpnam vasprintf vfprintf vprintf
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1854: checking for $ac_func" >&5
+echo "configure:1968: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1859 "configure"
+#line 1973 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -1878,7 +1992,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:1882: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1996: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -1905,12 +2019,12 @@ done
   for ac_func in vsprintf waitpid getrusage on_exit psignal strerror strsignal
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1909: checking for $ac_func" >&5
+echo "configure:2023: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1914 "configure"
+#line 2028 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -1933,7 +2047,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:1937: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2051: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -1960,12 +2074,12 @@ done
   for ac_func in sysconf times sbrk gettimeofday ffs
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1964: checking for $ac_func" >&5
+echo "configure:2078: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1969 "configure"
+#line 2083 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -1988,7 +2102,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:1992: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2106: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2032,6 +2146,7 @@ fi
 
 setobjs=
 CHECK=
+target_header_dir=
 if test -n "${with_target_subdir}"; then
 
   # We are being configured as a target library.  AC_REPLACE_FUNCS
@@ -2072,6 +2187,30 @@ EOF
 
   fi
 
+  # We may wish to install the target headers somewhere.
+  # Check whether --enable-install-libiberty or --disable-install-libiberty was given.
+if test "${enable_install_libiberty+set}" = set; then
+  enableval="$enable_install_libiberty"
+  enable_install_libiberty=$enableval
+else
+  enable_install_libiberty=no
+fi
+  
+  # Option parsed, now set things appropriately.
+  case x"$enable_install_libiberty" in
+    xyes|x)
+      target_header_dir=libiberty
+      ;;
+    xno)   
+      target_header_dir=
+      ;;
+    *) 
+      # This could be sanity-checked in various ways...
+      target_header_dir="${enable_install_libiberty}"
+      ;;
+  esac
+
+
 else
 
    # Not a target library, so we set things up to run the test suite.
@@ -2081,8 +2220,9 @@ fi
 
 
 
+
 case "${host}" in
-  *-*-cygwin*)
+  *-*-cygwin* | *-*-mingw*)
     cat >> confdefs.h <<\EOF
 #define HAVE_SYS_ERRLIST 1
 EOF
@@ -2192,7 +2332,7 @@ if test -z "${setobjs}"; then
   # We haven't set the list of objects yet.  Use the standard autoconf
   # tests.  This will only work if the compiler works.
   echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:2196: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:2336: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
 
 ac_ext=c
 # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
@@ -2203,12 +2343,12 @@ cross_compiling=$ac_cv_prog_cc_cross
 
 cat > conftest.$ac_ext << EOF
 
-#line 2207 "configure"
+#line 2347 "configure"
 #include "confdefs.h"
 
 main(){return(0);}
 EOF
-if { (eval echo configure:2212: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   ac_cv_prog_cc_works=yes
   # If we can't run a trivial program, we are probably using a cross compiler.
   if (./conftest; exit) 2>/dev/null; then
@@ -2234,19 +2374,19 @@ if test $ac_cv_prog_cc_works = no; then
   { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
 fi
 echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:2238: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2378: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
 cross_compiling=$ac_cv_prog_cc_cross
 
   for ac_func in $funcs
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2245: checking for $ac_func" >&5
+echo "configure:2385: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2250 "configure"
+#line 2390 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2269,7 +2409,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2273: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2413: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2296,12 +2436,12 @@ done
 
 
   echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2300: checking whether alloca needs Cray hooks" >&5
+echo "configure:2440: checking whether alloca needs Cray hooks" >&5
 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2305 "configure"
+#line 2445 "configure"
 #include "confdefs.h"
 #if defined(CRAY) && ! defined(CRAY2)
 webecray
@@ -2326,12 +2466,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6
 if test $ac_cv_os_cray = yes; then
   for ac_func in _getb67 GETB67 getb67; do
     echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2330: checking for $ac_func" >&5
+echo "configure:2470: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2335 "configure"
+#line 2475 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2354,7 +2494,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2358: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2498: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2380,7 +2520,7 @@ fi
 fi
 
 echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2384: checking stack direction for C alloca" >&5
+echo "configure:2524: checking stack direction for C alloca" >&5
 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2388,7 +2528,7 @@ else
   ac_cv_c_stack_direction=0
 else
   cat > conftest.$ac_ext <<EOF
-#line 2392 "configure"
+#line 2532 "configure"
 #include "confdefs.h"
 find_stack_direction ()
 {
@@ -2407,7 +2547,7 @@ main ()
   exit (find_stack_direction() < 0);
 }
 EOF
-if { (eval echo configure:2411: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2551: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_stack_direction=1
 else
@@ -2427,52 +2567,19 @@ cat >> confdefs.h <<EOF
 EOF
 
 
-  echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:2432: checking for pid_t" >&5
-if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
-  echo $ac_n "(cached) $ac_c" 1>&6
-else
-  cat > conftest.$ac_ext <<EOF
-#line 2437 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#if STDC_HEADERS
-#include <stdlib.h>
-#include <stddef.h>
-#endif
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
-  egrep "(^|[^a-zA-Z_0-9])pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
-  rm -rf conftest*
-  ac_cv_type_pid_t=yes
-else
-  rm -rf conftest*
-  ac_cv_type_pid_t=no
-fi
-rm -f conftest*
-
-fi
-echo "$ac_t""$ac_cv_type_pid_t" 1>&6
-if test $ac_cv_type_pid_t = no; then
-  cat >> confdefs.h <<\EOF
-#define pid_t int
-EOF
-
-fi
-
-ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
+  ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:2466: checking for vfork.h" >&5
+echo "configure:2573: checking for vfork.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2471 "configure"
+#line 2578 "configure"
 #include "confdefs.h"
 #include <vfork.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2476: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2583: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2497,18 +2604,18 @@ else
 fi
 
 echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:2501: checking for working vfork" >&5
+echo "configure:2608: checking for working vfork" >&5
 if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   if test "$cross_compiling" = yes; then
   echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:2507: checking for vfork" >&5
+echo "configure:2614: checking for vfork" >&5
 if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2512 "configure"
+#line 2619 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char vfork(); below.  */
@@ -2531,7 +2638,7 @@ vfork();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2535: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2642: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_vfork=yes"
 else
@@ -2553,7 +2660,7 @@ fi
 ac_cv_func_vfork_works=$ac_cv_func_vfork
 else
   cat > conftest.$ac_ext <<EOF
-#line 2557 "configure"
+#line 2664 "configure"
 #include "confdefs.h"
 /* Thanks to Paul Eggert for this test.  */
 #include <stdio.h>
@@ -2648,7 +2755,7 @@ main() {
   }
 }
 EOF
-if { (eval echo configure:2652: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2759: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_vfork_works=yes
 else
@@ -2680,12 +2787,12 @@ fi
     for ac_func in _doprnt
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2684: checking for $ac_func" >&5
+echo "configure:2791: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2689 "configure"
+#line 2796 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2708,7 +2815,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2712: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2819: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2738,12 +2845,12 @@ done
     for ac_func in _doprnt
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2742: checking for $ac_func" >&5
+echo "configure:2849: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2747 "configure"
+#line 2854 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2766,7 +2873,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2770: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2877: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2794,19 +2901,19 @@ done
 
   for v in $vars; do
     echo $ac_n "checking for $v""... $ac_c" 1>&6
-echo "configure:2798: checking for $v" >&5
+echo "configure:2905: checking for $v" >&5
     if eval "test \"`echo '$''{'libiberty_cv_var_$v'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2803 "configure"
+#line 2910 "configure"
 #include "confdefs.h"
 int *p;
 int main() {
-extern int $v; p = &$v;
+extern int $v []; p = $v;
 ; return 0; }
 EOF
-if { (eval echo configure:2810: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2917: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "libiberty_cv_var_$v=yes"
 else
@@ -2832,12 +2939,12 @@ EOF
   for ac_func in $checkfuncs
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2836: checking for $ac_func" >&5
+echo "configure:2943: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2841 "configure"
+#line 2948 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2860,7 +2967,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2864: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2971: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2890,17 +2997,17 @@ for ac_hdr in stdlib.h unistd.h sys/stat.h sys/types.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2894: checking for $ac_hdr" >&5
+echo "configure:3001: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2899 "configure"
+#line 3006 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2904: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3011: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2929,12 +3036,12 @@ done
 for ac_func in getpagesize
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2933: checking for $ac_func" >&5
+echo "configure:3040: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2938 "configure"
+#line 3045 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2957,7 +3064,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2961: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3068: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2982,7 +3089,7 @@ fi
 done
 
 echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:2986: checking for working mmap" >&5
+echo "configure:3093: checking for working mmap" >&5
 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2990,7 +3097,7 @@ else
   ac_cv_func_mmap_fixed_mapped=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 2994 "configure"
+#line 3101 "configure"
 #include "confdefs.h"
 
 /* Thanks to Mike Haertel and Jim Avera for this test.
@@ -3143,7 +3250,7 @@ main()
 }
 
 EOF
-if { (eval echo configure:3147: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3254: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_mmap_fixed_mapped=yes
 else
@@ -3167,7 +3274,7 @@ fi
 
 
 echo $ac_n "checking for working strncmp""... $ac_c" 1>&6
-echo "configure:3171: checking for working strncmp" >&5
+echo "configure:3278: checking for working strncmp" >&5
 if eval "test \"`echo '$''{'ac_cv_func_strncmp_works'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -3175,7 +3282,7 @@ else
   ac_cv_func_strncmp_works=no
 else
   cat > conftest.$ac_ext <<EOF
-#line 3179 "configure"
+#line 3286 "configure"
 #include "confdefs.h"
 
 /* Test by Jim Wilson and Kaveh Ghazi.
@@ -3239,7 +3346,7 @@ main ()
 }
 
 EOF
-if { (eval echo configure:3243: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3350: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
 then
   ac_cv_func_strncmp_works=yes
 else
@@ -3423,6 +3530,8 @@ s%@AR@%$AR%g
 s%@RANLIB@%$RANLIB%g
 s%@CC@%$CC%g
 s%@ac_libiberty_warn_cflags@%$ac_libiberty_warn_cflags%g
+s%@NO_MINUS_C_MINUS_O@%$NO_MINUS_C_MINUS_O%g
+s%@OUTPUT_OPTION@%$OUTPUT_OPTION%g
 s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
 s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
 s%@INSTALL_DATA@%$INSTALL_DATA%g
@@ -3430,6 +3539,7 @@ s%@INSTALL_DATA@%$INSTALL_DATA%g
 s%@host_makefile_frag@%%g
 s%@CPP@%$CPP%g
 s%@CHECK@%$CHECK%g
+s%@target_header_dir@%$target_header_dir%g
 s%@LIBOBJS@%$LIBOBJS%g
 s%@INSTALL_DEST@%$INSTALL_DEST%g
 
@@ -3645,6 +3755,7 @@ srcdir=${srcdir}
 host=${host}
 target=${target}
 with_target_subdir=${with_target_subdir}
+with_build_subdir=${with_build_subdir}
 with_multisubdir=${with_multisubdir}
 ac_configure_args="--enable-multilib ${ac_configure_args}"
 CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
@@ -3654,9 +3765,10 @@ EOF
 cat >> $CONFIG_STATUS <<\EOF
 test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
 if test -n "$CONFIG_FILES"; then
-  if test -n "${with_target_subdir}"; then
+  if test -n "${with_build_subdir}" || test -n "${with_target_subdir}"; then
     # FIXME: We shouldn't need to set ac_file
     ac_file=Makefile
+    LD="${ORIGINAL_LD_FOR_MULTILIBS}"
     . ${libiberty_topdir}/config-ml.in
   fi
 fi