ac_default_prefix=/usr/local
# Any additions from configure.in:
ac_help="$ac_help
- --with-target-subdir=SUBDIR Configuring in a subdirectory"
+ --with-target-subdir=SUBDIR Configuring in a subdirectory for target"
+ac_help="$ac_help
+ --with-build-subdir=SUBDIR Configuring in a subdirectory for build"
ac_help="$ac_help
--with-cross-host=HOST Configuring with a cross compiler"
ac_help="$ac_help
--with-newlib Configuring with newlib"
+ac_help="$ac_help
+ --enable-maintainer-mode
+ enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer"
+ac_help="$ac_help
+ --enable-install-libiberty Install headers for end users"
# Initialize some variables set by options.
# The variables have the same names as the options, with
+# This works around the fact that libtool configuration may change LD
+# for this particular configuration, but some shells, instead of
+# keeping the changes in LD private, export them just because LD is
+# exported. We don't use libtool yet, but some day we might, so...
+ORIGINAL_LD_FOR_MULTILIBS=$LD
+
# Check whether --with-target-subdir or --without-target-subdir was given.
if test "${with_target_subdir+set}" = set; then
withval="$with_target_subdir"
:
fi
+# Check whether --with-build-subdir or --without-build-subdir was given.
+if test "${with_build_subdir+set}" = set; then
+ withval="$with_build_subdir"
+ :
+fi
+
# Check whether --with-cross-host or --without-cross-host was given.
if test "${with_cross_host+set}" = set; then
withval="$with_cross_host"
if test "${srcdir}" = "."; then
- if test -z "${with_target_subdir}"; then
+ if test -n "${with_build_subdir}"; then
+ libiberty_topdir="${srcdir}/../.."
+ with_target_subdir=
+ elif test -z "${with_target_subdir}"; then
libiberty_topdir="${srcdir}/.."
else
if test "${with_target_subdir}" != "."; then
+echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6
+echo "configure:609: checking whether to enable maintainer-specific portions of Makefiles" >&5
+ # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given.
+if test "${enable_maintainer_mode+set}" = set; then
+ enableval="$enable_maintainer_mode"
+ maintainer_mode=$enableval
+else
+ maintainer_mode=no
+fi
+
+
+echo "$ac_t""$maintainer_mode" 1>&6
+
+if test "$maintainer_mode" = "yes"; then
+ MAINT=''
+ NOTMAINT='#'
+else
+ MAINT='#'
+ NOTMAINT=''
+fi
+
+# Do we have a single-tree copy of texinfo? Even if we do, we can't
+# rely on it - libiberty is built before texinfo.
+# Extract the first word of "makeinfo", so it can be a program name with args.
+set dummy makeinfo; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:634: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$MAKEINFO"; then
+ ac_cv_prog_MAKEINFO="$MAKEINFO" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_MAKEINFO="makeinfo"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+MAKEINFO="$ac_cv_prog_MAKEINFO"
+if test -n "$MAKEINFO"; then
+ echo "$ac_t""$MAKEINFO" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test "x$MAKEINFO" = "x"; then
+ MAKEINFO="@echo makeinfo missing; true"
+ BUILD_INFO=
+else
+ BUILD_INFO=info
+ case x"`$MAKEINFO --version | grep 'GNU texinfo'`" in
+ x*\ [1-3].* )
+ MAKEINFO="@echo $MAKEINFO is too old, 4.0 or newer required; true"
+ BUILD_INFO=
+ echo "configure: warning:
+*** Makeinfo is too old. Info documentation will not be built." 1>&2
+ ;;
+ esac
+fi
+
+
+
+# Extract the first word of "perl", so it can be a program name with args.
+set dummy perl; ac_word=$2
+echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
+echo "configure:680: checking for $ac_word" >&5
+if eval "test \"`echo '$''{'ac_cv_prog_PERL'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ if test -n "$PERL"; then
+ ac_cv_prog_PERL="$PERL" # Let the user override the test.
+else
+ IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
+ test -z "$ac_dir" && ac_dir=.
+ if test -f $ac_dir/$ac_word; then
+ ac_cv_prog_PERL="perl"
+ break
+ fi
+ done
+ IFS="$ac_save_ifs"
+fi
+fi
+PERL="$ac_cv_prog_PERL"
+if test -n "$PERL"; then
+ echo "$ac_t""$PERL" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+fi
+
+if test x"$PERL" = x""; then
+ HAVE_PERL='#'
+else
+ HAVE_PERL=''
+fi
+
+
+
# Make sure we can run config.sub.
if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:591: checking host system type" >&5
+echo "configure:720: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:614: checking build system type" >&5
+echo "configure:743: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:640: checking for $ac_word" >&5
+echo "configure:769: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:672: checking for $ac_word" >&5
+echo "configure:801: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:704: checking for $ac_word" >&5
+echo "configure:833: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:741: checking for $ac_word" >&5
+echo "configure:870: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:771: checking for $ac_word" >&5
+echo "configure:900: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:820: checking whether we are using GNU C" >&5
+echo "configure:949: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:829: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:958: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:845: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:974: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
+if test "x$CC" != xcc; then
+ echo $ac_n "checking whether $CC and cc understand -c and -o together""... $ac_c" 1>&6
+echo "configure:1006: checking whether $CC and cc understand -c and -o together" >&5
+else
+ echo $ac_n "checking whether cc understands -c and -o together""... $ac_c" 1>&6
+echo "configure:1009: checking whether cc understands -c and -o together" >&5
+fi
+set dummy $CC; ac_cc="`echo $2 |
+ sed -e 's/[^a-zA-Z0-9_]/_/g' -e 's/^[0-9]/_/'`"
+if eval "test \"`echo '$''{'ac_cv_prog_cc_${ac_cc}_c_o'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ echo 'foo(){}' > conftest.c
+# Make sure it works both with $CC and with simple cc.
+# We do the test twice because some compilers refuse to overwrite an
+# existing .o file with -o, though they will create one.
+ac_try='${CC-cc} -c conftest.c -o conftest.o 1>&5'
+if { (eval echo configure:1021: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1022: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+then
+ eval ac_cv_prog_cc_${ac_cc}_c_o=yes
+ if test "x$CC" != xcc; then
+ # Test first that cc exists at all.
+ if { ac_try='cc -c conftest.c 1>&5'; { (eval echo configure:1027: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; }; then
+ ac_try='cc -c conftest.c -o conftest.o 1>&5'
+ if { (eval echo configure:1029: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } &&
+ test -f conftest.o && { (eval echo configure:1030: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; };
+ then
+ # cc works too.
+ :
+ else
+ # cc exists but doesn't like -o.
+ eval ac_cv_prog_cc_${ac_cc}_c_o=no
+ fi
+ fi
+ fi
+else
+ eval ac_cv_prog_cc_${ac_cc}_c_o=no
+fi
+rm -f conftest*
+
+fi
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+else
+ echo "$ac_t""no" 1>&6
+ cat >> confdefs.h <<\EOF
+#define NO_MINUS_C_MINUS_O 1
+EOF
+
+fi
+
+# autoconf is lame and doesn't give us any substitution variable for this.
+if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" = no"; then
+ NO_MINUS_C_MINUS_O=yes
+else
+ OUTPUT_OPTION='-o $@'
+fi
+
+
+
echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6
-echo "configure:876: checking for POSIXized ISC" >&5
+echo "configure:1066: checking for POSIXized ISC" >&5
if test -d /etc/conf/kconfig.d &&
grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1
then
fi
echo $ac_n "checking for working const""... $ac_c" 1>&6
-echo "configure:897: checking for working const" >&5
+echo "configure:1087: checking for working const" >&5
if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 902 "configure"
+#line 1092 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:951: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1141: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_const=yes
else
fi
echo $ac_n "checking for inline""... $ac_c" 1>&6
-echo "configure:972: checking for inline" >&5
+echo "configure:1162: checking for inline" >&5
if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_inline=no
for ac_kw in inline __inline__ __inline; do
cat > conftest.$ac_ext <<EOF
-#line 979 "configure"
+#line 1169 "configure"
#include "confdefs.h"
int main() {
} $ac_kw foo() {
; return 0; }
EOF
-if { (eval echo configure:986: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1176: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_inline=$ac_kw; break
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1029: checking for a BSD compatible install" >&5
+echo "configure:1219: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# able to link anything, it had better be able to at least compile
# something.
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1090: checking how to run the C preprocessor" >&5
+echo "configure:1280: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1105 "configure"
+#line 1295 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1111: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1301: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 1122 "configure"
+#line 1312 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1128: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1318: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 1139 "configure"
+#line 1329 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1145: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1335: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
fi
echo "$ac_t""$CPP" 1>&6
-for ac_hdr in sys/file.h sys/param.h limits.h stdlib.h string.h unistd.h strings.h sys/time.h time.h sys/resource.h sys/stat.h sys/mman.h fcntl.h
+for ac_hdr in sys/file.h sys/param.h limits.h stdlib.h string.h unistd.h strings.h sys/time.h time.h sys/resource.h sys/stat.h sys/mman.h fcntl.h alloca.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1173: checking for $ac_hdr" >&5
+echo "configure:1363: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1178 "configure"
+#line 1368 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1183: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1373: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
done
echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6
-echo "configure:1210: checking for sys/wait.h that is POSIX.1 compatible" >&5
+echo "configure:1400: checking for sys/wait.h that is POSIX.1 compatible" >&5
if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1215 "configure"
+#line 1405 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/wait.h>
s = WIFEXITED (s) ? WEXITSTATUS (s) : 1;
; return 0; }
EOF
-if { (eval echo configure:1231: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1421: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_sys_wait_h=yes
else
fi
echo $ac_n "checking whether time.h and sys/time.h may both be included""... $ac_c" 1>&6
-echo "configure:1252: checking whether time.h and sys/time.h may both be included" >&5
+echo "configure:1442: checking whether time.h and sys/time.h may both be included" >&5
if eval "test \"`echo '$''{'ac_cv_header_time'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1257 "configure"
+#line 1447 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/time.h>
struct tm *tp;
; return 0; }
EOF
-if { (eval echo configure:1266: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1456: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_header_time=yes
else
echo $ac_n "checking whether errno must be declared""... $ac_c" 1>&6
-echo "configure:1288: checking whether errno must be declared" >&5
+echo "configure:1478: checking whether errno must be declared" >&5
if eval "test \"`echo '$''{'libiberty_cv_declare_errno'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1293 "configure"
+#line 1483 "configure"
#include "confdefs.h"
#include <errno.h>
int main() {
int x = errno;
; return 0; }
EOF
-if { (eval echo configure:1300: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1490: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
libiberty_cv_declare_errno=no
else
fi
+echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
+echo "configure:1512: checking for ANSI C header files" >&5
+if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1517 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+#include <stdarg.h>
+#include <string.h>
+#include <float.h>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1525: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ ac_cv_header_stdc=yes
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+if test $ac_cv_header_stdc = yes; then
+ # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 1542 "configure"
+#include "confdefs.h"
+#include <string.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "memchr" >/dev/null 2>&1; then
+ :
+else
+ rm -rf conftest*
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
+cat > conftest.$ac_ext <<EOF
+#line 1560 "configure"
+#include "confdefs.h"
+#include <stdlib.h>
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "free" >/dev/null 2>&1; then
+ :
+else
+ rm -rf conftest*
+ ac_cv_header_stdc=no
+fi
+rm -f conftest*
+
+fi
+
+if test $ac_cv_header_stdc = yes; then
+ # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
+if test "$cross_compiling" = yes; then
+ :
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1581 "configure"
+#include "confdefs.h"
+#include <ctype.h>
+#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
+#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
+#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
+int main () { int i; for (i = 0; i < 256; i++)
+if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
+exit (0); }
+
+EOF
+if { (eval echo configure:1592: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+then
+ :
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -fr conftest*
+ ac_cv_header_stdc=no
+fi
+rm -fr conftest*
+fi
+
+fi
+fi
+
+echo "$ac_t""$ac_cv_header_stdc" 1>&6
+if test $ac_cv_header_stdc = yes; then
+ cat >> confdefs.h <<\EOF
+#define STDC_HEADERS 1
+EOF
+
+fi
+
+echo $ac_n "checking for uintptr_t""... $ac_c" 1>&6
+echo "configure:1616: checking for uintptr_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_uintptr_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1621 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "(^|[^a-zA-Z_0-9])uintptr_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_type_uintptr_t=yes
+else
+ rm -rf conftest*
+ ac_cv_type_uintptr_t=no
+fi
+rm -f conftest*
+
+fi
+echo "$ac_t""$ac_cv_type_uintptr_t" 1>&6
+if test $ac_cv_type_uintptr_t = no; then
+ cat >> confdefs.h <<\EOF
+#define uintptr_t unsigned long
+EOF
+
+fi
+
+
+if test $ac_cv_type_uintptr_t = yes
+then
+ cat >> confdefs.h <<\EOF
+#define HAVE_UINTPTR_T 1
+EOF
+
+fi
+
+echo $ac_n "checking for pid_t""... $ac_c" 1>&6
+echo "configure:1658: checking for pid_t" >&5
+if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1663 "configure"
+#include "confdefs.h"
+#include <sys/types.h>
+#if STDC_HEADERS
+#include <stdlib.h>
+#include <stddef.h>
+#endif
+EOF
+if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
+ egrep "(^|[^a-zA-Z_0-9])pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+ rm -rf conftest*
+ ac_cv_type_pid_t=yes
+else
+ rm -rf conftest*
+ ac_cv_type_pid_t=no
+fi
+rm -f conftest*
+
+fi
+echo "$ac_t""$ac_cv_type_pid_t" 1>&6
+if test $ac_cv_type_pid_t = no; then
+ cat >> confdefs.h <<\EOF
+#define pid_t int
+EOF
+
+fi
+
+
# This is the list of functions which libiberty will provide if they
# are not available on the host.
for ac_func in asprintf atexit basename bcmp bcopy bsearch bzero calloc clock
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1377: checking for $ac_func" >&5
+echo "configure:1748: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1382 "configure"
+#line 1753 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1405: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1776: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in getcwd getpagesize index insque mkstemps memchr memcmp memcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1432: checking for $ac_func" >&5
+echo "configure:1803: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1437 "configure"
+#line 1808 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1460: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1831: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in memmove memset putenv random rename rindex sigsetmask
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1487: checking for $ac_func" >&5
+echo "configure:1858: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1492 "configure"
+#line 1863 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1515: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1886: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in strcasecmp setenv strchr strdup strncasecmp strrchr strstr
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1542: checking for $ac_func" >&5
+echo "configure:1913: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1547 "configure"
+#line 1918 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1570: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1941: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in strtod strtol strtoul tmpnam vasprintf vfprintf vprintf
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1597: checking for $ac_func" >&5
+echo "configure:1968: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1602 "configure"
+#line 1973 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1625: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1996: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in vsprintf waitpid getrusage on_exit psignal strerror strsignal
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1652: checking for $ac_func" >&5
+echo "configure:2023: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1657 "configure"
+#line 2028 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1680: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2051: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in sysconf times sbrk gettimeofday ffs
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1707: checking for $ac_func" >&5
+echo "configure:2078: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1712 "configure"
+#line 2083 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1735: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2106: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
setobjs=
CHECK=
+target_header_dir=
if test -n "${with_target_subdir}"; then
# We are being configured as a target library. AC_REPLACE_FUNCS
fi
+ # We may wish to install the target headers somewhere.
+ # Check whether --enable-install-libiberty or --disable-install-libiberty was given.
+if test "${enable_install_libiberty+set}" = set; then
+ enableval="$enable_install_libiberty"
+ enable_install_libiberty=$enableval
else
-
- # Not a target library, so we set things up to run the test suite.
- CHECK=check-cplus-dem
-
+ enable_install_libiberty=no
fi
+
+ # Option parsed, now set things appropriately.
+ case x"$enable_install_libiberty" in
+ xyes|x)
+ target_header_dir=libiberty
+ ;;
+ xno)
+ target_header_dir=
+ ;;
+ *)
+ # This could be sanity-checked in various ways...
+ target_header_dir="${enable_install_libiberty}"
+ ;;
+ esac
+
+
+else
+
+ # Not a target library, so we set things up to run the test suite.
+ CHECK=check-cplus-dem
+
+fi
+
+case "${host}" in
+ *-*-cygwin* | *-*-mingw*)
+ cat >> confdefs.h <<\EOF
+#define HAVE_SYS_ERRLIST 1
+EOF
+
+ cat >> confdefs.h <<\EOF
+#define HAVE_SYS_NERR 1
+EOF
+
+ ;;
+esac
+
if test -z "${setobjs}"; then
case "${host}" in
libiberty_cv_var_sys_errlist=yes
;;
+ *-*-*vms*)
+ # Under VMS, vfork works very different than on Unix. The standard test
+ # won't work, and it isn't easily adaptable. It makes more sense to
+ # just force it.
+ ac_cv_func_vfork_works=yes
+ ;;
+
esac
# We haven't set the list of objects yet. Use the standard autoconf
# tests. This will only work if the compiler works.
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1919: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:2336: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cat > conftest.$ac_ext << EOF
-#line 1930 "configure"
+#line 2347 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:1935: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1961: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:2378: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
for ac_func in $funcs
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1968: checking for $ac_func" >&5
+echo "configure:2385: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1973 "configure"
+#line 2390 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:1996: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2413: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6
-echo "configure:2023: checking whether alloca needs Cray hooks" >&5
+echo "configure:2440: checking whether alloca needs Cray hooks" >&5
if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2028 "configure"
+#line 2445 "configure"
#include "confdefs.h"
#if defined(CRAY) && ! defined(CRAY2)
webecray
if test $ac_cv_os_cray = yes; then
for ac_func in _getb67 GETB67 getb67; do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2053: checking for $ac_func" >&5
+echo "configure:2470: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2058 "configure"
+#line 2475 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2081: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2498: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6
-echo "configure:2107: checking stack direction for C alloca" >&5
+echo "configure:2524: checking stack direction for C alloca" >&5
if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_stack_direction=0
else
cat > conftest.$ac_ext <<EOF
-#line 2115 "configure"
+#line 2532 "configure"
#include "confdefs.h"
find_stack_direction ()
{
exit (find_stack_direction() < 0);
}
EOF
-if { (eval echo configure:2134: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2551: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_stack_direction=1
else
EOF
- echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6
-echo "configure:2155: checking for ANSI C header files" >&5
-if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2160 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-#include <stdarg.h>
-#include <string.h>
-#include <float.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2168: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- ac_cv_header_stdc=yes
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-if test $ac_cv_header_stdc = yes; then
- # SunOS 4.x string.h does not declare mem*, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 2185 "configure"
-#include "confdefs.h"
-#include <string.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "memchr" >/dev/null 2>&1; then
- :
-else
- rm -rf conftest*
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI.
-cat > conftest.$ac_ext <<EOF
-#line 2203 "configure"
-#include "confdefs.h"
-#include <stdlib.h>
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "free" >/dev/null 2>&1; then
- :
-else
- rm -rf conftest*
- ac_cv_header_stdc=no
-fi
-rm -f conftest*
-
-fi
-
-if test $ac_cv_header_stdc = yes; then
- # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi.
-if test "$cross_compiling" = yes; then
- :
-else
- cat > conftest.$ac_ext <<EOF
-#line 2224 "configure"
-#include "confdefs.h"
-#include <ctype.h>
-#define ISLOWER(c) ('a' <= (c) && (c) <= 'z')
-#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c))
-#define XOR(e, f) (((e) && !(f)) || (!(e) && (f)))
-int main () { int i; for (i = 0; i < 256; i++)
-if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2);
-exit (0); }
-
-EOF
-if { (eval echo configure:2235: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
-then
- :
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -fr conftest*
- ac_cv_header_stdc=no
-fi
-rm -fr conftest*
-fi
-
-fi
-fi
-
-echo "$ac_t""$ac_cv_header_stdc" 1>&6
-if test $ac_cv_header_stdc = yes; then
- cat >> confdefs.h <<\EOF
-#define STDC_HEADERS 1
-EOF
-
-fi
-
-echo $ac_n "checking for pid_t""... $ac_c" 1>&6
-echo "configure:2259: checking for pid_t" >&5
-if eval "test \"`echo '$''{'ac_cv_type_pid_t'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 2264 "configure"
-#include "confdefs.h"
-#include <sys/types.h>
-#if STDC_HEADERS
-#include <stdlib.h>
-#include <stddef.h>
-#endif
-EOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "(^|[^a-zA-Z_0-9])pid_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
- rm -rf conftest*
- ac_cv_type_pid_t=yes
-else
- rm -rf conftest*
- ac_cv_type_pid_t=no
-fi
-rm -f conftest*
-
-fi
-echo "$ac_t""$ac_cv_type_pid_t" 1>&6
-if test $ac_cv_type_pid_t = no; then
- cat >> confdefs.h <<\EOF
-#define pid_t int
-EOF
-
-fi
-
-ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
+ ac_safe=`echo "vfork.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for vfork.h""... $ac_c" 1>&6
-echo "configure:2293: checking for vfork.h" >&5
+echo "configure:2573: checking for vfork.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2298 "configure"
+#line 2578 "configure"
#include "confdefs.h"
#include <vfork.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2303: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2583: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
fi
echo $ac_n "checking for working vfork""... $ac_c" 1>&6
-echo "configure:2328: checking for working vfork" >&5
+echo "configure:2608: checking for working vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$cross_compiling" = yes; then
echo $ac_n "checking for vfork""... $ac_c" 1>&6
-echo "configure:2334: checking for vfork" >&5
+echo "configure:2614: checking for vfork" >&5
if eval "test \"`echo '$''{'ac_cv_func_vfork'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2339 "configure"
+#line 2619 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char vfork(); below. */
; return 0; }
EOF
-if { (eval echo configure:2362: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2642: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_vfork=yes"
else
ac_cv_func_vfork_works=$ac_cv_func_vfork
else
cat > conftest.$ac_ext <<EOF
-#line 2384 "configure"
+#line 2664 "configure"
#include "confdefs.h"
/* Thanks to Paul Eggert for this test. */
#include <stdio.h>
}
}
EOF
-if { (eval echo configure:2479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:2759: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_vfork_works=yes
else
if test $ac_cv_func_vfork_works = no; then
LIBOBJS="$LIBOBJS vfork.o"
fi
+ # We only need _doprnt if we might use it to implement v*printf.
+ if test $ac_cv_func_vprintf != yes \
+ || test $ac_cv_func_vfprintf != yes \
+ || test $ac_cv_func_vsprintf != yes; then
+ for ac_func in _doprnt
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2791: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2796 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2819: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+LIBOBJS="$LIBOBJS ${ac_func}.${ac_objext}"
+fi
+done
+
+
+ else
+ for ac_func in _doprnt
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:2849: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 2854 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:2877: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+ fi
+
for v in $vars; do
echo $ac_n "checking for $v""... $ac_c" 1>&6
-echo "configure:2506: checking for $v" >&5
+echo "configure:2905: checking for $v" >&5
if eval "test \"`echo '$''{'libiberty_cv_var_$v'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2511 "configure"
+#line 2910 "configure"
#include "confdefs.h"
int *p;
int main() {
-extern int $v; p = &$v;
+extern int $v []; p = $v;
; return 0; }
EOF
-if { (eval echo configure:2518: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2917: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "libiberty_cv_var_$v=yes"
else
for ac_func in $checkfuncs
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2544: checking for $ac_func" >&5
+echo "configure:2943: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2549 "configure"
+#line 2948 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2572: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2971: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
fi
-for ac_hdr in unistd.h
+for ac_hdr in stdlib.h unistd.h sys/stat.h sys/types.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2602: checking for $ac_hdr" >&5
+echo "configure:3001: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2607 "configure"
+#line 3006 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2612: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3011: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getpagesize
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2641: checking for $ac_func" >&5
+echo "configure:3040: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2646 "configure"
+#line 3045 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2669: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3068: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
done
echo $ac_n "checking for working mmap""... $ac_c" 1>&6
-echo "configure:2694: checking for working mmap" >&5
+echo "configure:3093: checking for working mmap" >&5
if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_mmap_fixed_mapped=no
else
cat > conftest.$ac_ext <<EOF
-#line 2702 "configure"
+#line 3101 "configure"
#include "confdefs.h"
/* Thanks to Mike Haertel and Jim Avera for this test.
#include <fcntl.h>
#include <sys/mman.h>
+#if HAVE_SYS_TYPES_H
+# include <sys/types.h>
+#endif
+
+#if HAVE_STDLIB_H
+# include <stdlib.h>
+#endif
+
+#if HAVE_SYS_STAT_H
+# include <sys/stat.h>
+#endif
+
+#if HAVE_UNISTD_H
+# include <unistd.h>
+#endif
+
/* This mess was copied from the GNU getpagesize.h. */
#ifndef HAVE_GETPAGESIZE
-# ifdef HAVE_UNISTD_H
-# include <unistd.h>
-# endif
/* Assume that all systems that can run configure have sys/param.h. */
# ifndef HAVE_SYS_PARAM_H
}
EOF
-if { (eval echo configure:2842: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3254: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_mmap_fixed_mapped=yes
else
echo $ac_n "checking for working strncmp""... $ac_c" 1>&6
-echo "configure:2866: checking for working strncmp" >&5
+echo "configure:3278: checking for working strncmp" >&5
if eval "test \"`echo '$''{'ac_cv_func_strncmp_works'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_func_strncmp_works=no
else
cat > conftest.$ac_ext <<EOF
-#line 2874 "configure"
+#line 3286 "configure"
#include "confdefs.h"
/* Test by Jim Wilson and Kaveh Ghazi.
p = (char *) mmap (0, MAP_LEN, PROT_READ|PROT_WRITE,
MAP_ANON|MAP_PRIVATE, dev_zero, 0);
if (p == (char *)-1)
+ p = (char *) mmap (0, MAP_LEN, PROT_READ|PROT_WRITE,
+ MAP_ANON|MAP_PRIVATE, -1, 0);
+ if (p == (char *)-1)
exit (2);
else
{
}
EOF
-if { (eval echo configure:2935: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3350: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_func_strncmp_works=yes
else
s%@oldincludedir@%$oldincludedir%g
s%@infodir@%$infodir%g
s%@mandir@%$mandir%g
+s%@MAINT@%$MAINT%g
+s%@NOTMAINT@%$NOTMAINT%g
+s%@MAKEINFO@%$MAKEINFO%g
+s%@BUILD_INFO@%$BUILD_INFO%g
+s%@PERL@%$PERL%g
+s%@HAVE_PERL@%$HAVE_PERL%g
s%@host@%$host%g
s%@host_alias@%$host_alias%g
s%@host_cpu@%$host_cpu%g
s%@RANLIB@%$RANLIB%g
s%@CC@%$CC%g
s%@ac_libiberty_warn_cflags@%$ac_libiberty_warn_cflags%g
+s%@NO_MINUS_C_MINUS_O@%$NO_MINUS_C_MINUS_O%g
+s%@OUTPUT_OPTION@%$OUTPUT_OPTION%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@host_makefile_frag@%%g
s%@CPP@%$CPP%g
s%@CHECK@%$CHECK%g
+s%@target_header_dir@%$target_header_dir%g
s%@LIBOBJS@%$LIBOBJS%g
s%@INSTALL_DEST@%$INSTALL_DEST%g
host=${host}
target=${target}
with_target_subdir=${with_target_subdir}
+with_build_subdir=${with_build_subdir}
with_multisubdir=${with_multisubdir}
ac_configure_args="--enable-multilib ${ac_configure_args}"
CONFIG_SHELL=${CONFIG_SHELL-/bin/sh}
cat >> $CONFIG_STATUS <<\EOF
test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
if test -n "$CONFIG_FILES"; then
- if test -n "${with_target_subdir}"; then
+ if test -n "${with_build_subdir}" || test -n "${with_target_subdir}"; then
# FIXME: We shouldn't need to set ac_file
ac_file=Makefile
+ LD="${ORIGINAL_LD_FOR_MULTILIBS}"
. ${libiberty_topdir}/config-ml.in
fi
fi
OSDN Git Service
