program_transform_name=s,x,x,
silent=
site=
+sitefile=
srcdir=
target=NONE
verbose=
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
+ --site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
+ -site-file | --site-file | --site-fil | --site-fi | --site-f)
+ ac_prev=sitefile ;;
+ -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+ sitefile="$ac_optarg" ;;
+
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+ if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
fi
+else
+ CONFIG_SITE="$sitefile"
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
+# This works around the fact that libtool configuration may change LD
+# for this particular configuration, but some shells, instead of
+# keeping the changes in LD private, export them just because LD is
+# exported.
+ORIGINAL_LD_FOR_MULTILIBS=$LD
+
ac_aux_dir=
for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
if test -f $ac_dir/install-sh; then
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:594: checking host system type" >&5
+echo "configure:611: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:615: checking target system type" >&5
+echo "configure:632: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:633: checking build system type" >&5
+echo "configure:650: checking build system type" >&5
build_alias=$build
case "$build_alias" in
fi
echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:665: checking for Cygwin environment" >&5
+echo "configure:682: checking for Cygwin environment" >&5
if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 670 "configure"
+#line 687 "configure"
#include "confdefs.h"
int main() {
return __CYGWIN__;
; return 0; }
EOF
-if { (eval echo configure:681: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:698: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_cygwin=yes
else
CYGWIN=
test "$ac_cv_cygwin" = yes && CYGWIN=yes
echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:698: checking for mingw32 environment" >&5
+echo "configure:715: checking for mingw32 environment" >&5
if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 703 "configure"
+#line 720 "configure"
#include "confdefs.h"
int main() {
return __MINGW32__;
; return 0; }
EOF
-if { (eval echo configure:710: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:727: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_mingw32=yes
else
# be 'cp -p' if linking isn't available.
#ac_cv_prog_LN_S='cp -p'
echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:797: checking whether ln -s works" >&5
+echo "configure:814: checking whether ln -s works" >&5
if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:853: checking for $ac_word" >&5
+echo "configure:870: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:883: checking for $ac_word" >&5
+echo "configure:900: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:932: checking whether we are using GNU C" >&5
+echo "configure:949: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:941: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:958: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:956: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:973: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
set dummy ${ac_tool_prefix}as; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:987: checking for $ac_word" >&5
+echo "configure:1004: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
set dummy ${ac_tool_prefix}ar; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1019: checking for $ac_word" >&5
+echo "configure:1036: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1051: checking for $ac_word" >&5
+echo "configure:1068: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1083: checking for $ac_word" >&5
+echo "configure:1100: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1127: checking for a BSD compatible install" >&5
+echo "configure:1144: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1195: checking for executable suffix" >&5
+echo "configure:1212: checking for executable suffix" >&5
if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int main () { return 0; }' > conftest.$ac_ext
ac_cv_exeext=
- if { (eval echo configure:1205: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ if { (eval echo configure:1222: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
for file in conftest.*; do
case $file in
- *.c | *.o | *.obj) ;;
+ *.c | *.o | *.obj | *.ilk | *.pdb) ;;
*) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
esac
done
glibcpp_prefixdir=${prefix}
echo $ac_n "checking for interface version number""... $ac_c" 1>&6
-echo "configure:1235: checking for interface version number" >&5
+echo "configure:1252: checking for interface version number" >&5
libstdcxx_interface=$INTERFACE
echo "$ac_t""$libstdcxx_interface" 1>&6
# Process the option "--enable-version-specific-runtime-libs"
echo $ac_n "checking for --enable-version-specific-runtime-libs""... $ac_c" 1>&6
-echo "configure:1241: checking for --enable-version-specific-runtime-libs" >&5
+echo "configure:1258: checking for --enable-version-specific-runtime-libs" >&5
# Check whether --enable-version-specific-runtime-libs or --disable-version-specific-runtime-libs was given.
if test "${enable_version_specific_runtime_libs+set}" = set; then
enableval="$enable_version_specific_runtime_libs"
compiler_name=f771
rm -f skip-this-dir
echo $ac_n "checking if compiler $compiler_name has been built""... $ac_c" 1>&6
-echo "configure:1295: checking if compiler $compiler_name has been built" >&5
+echo "configure:1312: checking if compiler $compiler_name has been built" >&5
if eval "test \"`echo '$''{'g77_cv_compiler_exists'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test "$GCC" = yes; then
# Check if gcc -print-prog-name=ld gives a path.
echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1403: checking for ld used by GCC" >&5
+echo "configure:1420: checking for ld used by GCC" >&5
case $host in
*-*-mingw*)
# gcc leaves a trailing carriage return which upsets mingw
esac
elif test "$with_gnu_ld" = yes; then
echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1433: checking for GNU ld" >&5
+echo "configure:1450: checking for GNU ld" >&5
else
echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1436: checking for non-GNU ld" >&5
+echo "configure:1453: checking for non-GNU ld" >&5
fi
if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
fi
test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1471: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1488: checking if the linker ($LD) is GNU ld" >&5
if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1488: checking for $LD option to reload object files" >&5
+echo "configure:1505: checking for $LD option to reload object files" >&5
if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
test -n "$reload_flag" && reload_flag=" $reload_flag"
echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1500: checking for BSD-compatible nm" >&5
+echo "configure:1517: checking for BSD-compatible nm" >&5
if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
echo "$ac_t""$NM" 1>&6
echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:1538: checking how to recognise dependant libraries" >&5
+echo "configure:1555: checking how to recognise dependant libraries" >&5
if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
deplibs_check_method=$lt_cv_deplibs_check_method
echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:1702: checking for object suffix" >&5
+echo "configure:1719: checking for object suffix" >&5
if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
rm -f conftest*
echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:1708: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1725: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
for ac_file in conftest.*; do
case $ac_file in
*.c) ;;
file_magic*)
if test "$file_magic_cmd" = '$MAGIC_CMD'; then
echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:1732: checking for ${ac_tool_prefix}file" >&5
+echo "configure:1749: checking for ${ac_tool_prefix}file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
if test -z "$lt_cv_path_MAGIC_CMD"; then
if test -n "$ac_tool_prefix"; then
echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:1794: checking for file" >&5
+echo "configure:1811: checking for file" >&5
if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
set dummy ${ac_tool_prefix}ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1865: checking for $ac_word" >&5
+echo "configure:1882: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1897: checking for $ac_word" >&5
+echo "configure:1914: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
set dummy ${ac_tool_prefix}strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1932: checking for $ac_word" >&5
+echo "configure:1949: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "strip", so it can be a program name with args.
set dummy strip; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1964: checking for $ac_word" >&5
+echo "configure:1981: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
case $host in
*-*-irix6*)
# Find out which ABI we are using.
- echo '#line 2031 "configure"' > conftest.$ac_ext
- if { (eval echo configure:2032: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ echo '#line 2048 "configure"' > conftest.$ac_ext
+ if { (eval echo configure:2049: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
case `/usr/bin/file conftest.$ac_objext` in
*32-bit*)
LD="${LD-ld} -32"
SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -belf"
echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2053: checking whether the C compiler needs -belf" >&5
+echo "configure:2070: checking whether the C compiler needs -belf" >&5
if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 2066 "configure"
+#line 2083 "configure"
#include "confdefs.h"
int main() {
; return 0; }
EOF
-if { (eval echo configure:2073: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2090: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
lt_cv_cc_needs_belf=yes
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2197: checking for $ac_word" >&5
+echo "configure:2214: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:2237: checking for a BSD compatible install" >&5
+echo "configure:2254: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:2290: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:2307: checking whether ${MAKE-make} sets \${MAKE}" >&5
set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Sanity check for the cross-compilation case:
echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2319: checking how to run the C preprocessor" >&5
+echo "configure:2336: checking how to run the C preprocessor" >&5
# On Suns, sometimes $CPP names a directory.
if test -n "$CPP" && test -d "$CPP"; then
CPP=
# On the NeXT, cc -E runs the code through the compiler's parser,
# not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 2334 "configure"
+#line 2351 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2340: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2357: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -E -traditional-cpp"
cat > conftest.$ac_ext <<EOF
-#line 2351 "configure"
+#line 2368 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2357: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2374: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
rm -rf conftest*
CPP="${CC-cc} -nologo -E"
cat > conftest.$ac_ext <<EOF
-#line 2368 "configure"
+#line 2385 "configure"
#include "confdefs.h"
#include <assert.h>
Syntax Error
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2374: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2391: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
:
ac_safe=`echo "stdio.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for stdio.h""... $ac_c" 1>&6
-echo "configure:2400: checking for stdio.h" >&5
+echo "configure:2417: checking for stdio.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2405 "configure"
+#line 2422 "configure"
#include "confdefs.h"
#include <stdio.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2410: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2427: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
echo $ac_n "checking for built-in g77 integer types""... $ac_c" 1>&6
-echo "configure:2438: checking for built-in g77 integer types" >&5
+echo "configure:2455: checking for built-in g77 integer types" >&5
if eval "test \"`echo '$''{'libf2c_cv_has_g77_builtin_types'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2443 "configure"
+#line 2460 "configure"
#include "confdefs.h"
int main() {
__g77_ulongint g77ul;
; return 0; }
EOF
-if { (eval echo configure:2453: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2470: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
libf2c_cv_has_g77_builtin_types=yes
else
cat >> $CONFIG_STATUS <<\EOF
test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h
if test -n "$CONFIG_FILES"; then
+ LD="${ORIGINAL_LD_FOR_MULTILIBS}"
if test -n "${with_target_subdir}"; then
# FIXME: We shouldn't need to set ac_file
ac_file=Makefile