/* Remote debugging interface for MIPS remote debugging protocol.
- Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001,
- 2002, 2003, 2004 Free Software Foundation, Inc.
+ Copyright (C) 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+ 2003, 2004, 2006, 2007 Free Software Foundation, Inc.
Contributed by Cygnus Support. Written by Ian Lance Taylor
<ian@cygnus.com>.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ Boston, MA 02110-1301, USA. */
#include "defs.h"
#include "inferior.h"
static int mips_store_word (CORE_ADDR addr, unsigned int value,
char *old_contents);
-static int mips_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len,
+static int mips_xfer_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len,
int write,
struct mem_attrib *attrib,
struct target_ops *target);
{
if (mips_need_reply)
internal_error (__FILE__, __LINE__,
- "mips_request: Trying to send command before reply");
+ _("mips_request: Trying to send command before reply"));
sprintf (buff, "0x0 %c 0x%s 0x%s", cmd, paddr_nz (addr), paddr_nz (data));
mips_send_packet (buff, 1);
mips_need_reply = 1;
if (!mips_need_reply)
internal_error (__FILE__, __LINE__,
- "mips_request: Trying to get reply before command");
+ _("mips_request: Trying to get reply before command"));
mips_need_reply = 0;
of some sort. That doesn't happen here (in fact, it may not be
possible to get the monitor to send the appropriate packet). */
- flush_cached_frames ();
+ reinit_frame_cache ();
registers_changed ();
stop_pc = read_pc ();
print_stack_frame (get_selected_frame (NULL), 0, SRC_AND_LOC);
static int mask_address_p = 1;
static int
-mips_xfer_memory (CORE_ADDR memaddr, char *myaddr, int len, int write,
+mips_xfer_memory (CORE_ADDR memaddr, gdb_byte *myaddr, int len, int write,
struct mem_attrib *attrib, struct target_ops *target)
{
int i;
/* FIXME: Should we set inferior_ptid here? */
- proceed (entry_pt, TARGET_SIGNAL_DEFAULT, 0);
+ write_pc (entry_pt);
}
/* Clean up after a process. Actually nothing to do. */
/* Insert a breakpoint. On targets that don't have built-in
breakpoint support, we read the contents of the target location and
stash it, then overwrite it with a breakpoint instruction. ADDR is
- the target location in the target machine. CONTENTS_CACHE is a
- pointer to memory allocated for saving the target contents. It is
- guaranteed by the caller to be long enough to save the breakpoint
- length returned by BREAKPOINT_FROM_PC. */
+ the target location in the target machine. BPT is the breakpoint
+ being inserted or removed, which contains memory for saving the
+ target contents. */
static int
-mips_insert_breakpoint (CORE_ADDR addr, char *contents_cache)
+mips_insert_breakpoint (struct bp_target_info *bp_tgt)
{
if (monitor_supports_breakpoints)
- return set_breakpoint (addr, MIPS_INSN32_SIZE, BREAK_FETCH);
+ return set_breakpoint (bp_tgt->placed_address, MIPS_INSN32_SIZE,
+ BREAK_FETCH);
else
- return memory_insert_breakpoint (addr, contents_cache);
+ return memory_insert_breakpoint (bp_tgt);
}
static int
-mips_remove_breakpoint (CORE_ADDR addr, char *contents_cache)
+mips_remove_breakpoint (struct bp_target_info *bp_tgt)
{
if (monitor_supports_breakpoints)
- return clear_breakpoint (addr, MIPS_INSN32_SIZE, BREAK_FETCH);
+ return clear_breakpoint (bp_tgt->placed_address, MIPS_INSN32_SIZE,
+ BREAK_FETCH);
else
- return memory_remove_breakpoint (addr, contents_cache);
+ return memory_remove_breakpoint (bp_tgt);
}
/* Tell whether this target can support a hardware breakpoint. CNT
flags = "f";
break;
default:
- internal_error (__FILE__, __LINE__, "failed internal consistency check");
+ internal_error (__FILE__, __LINE__, _("failed internal consistency check"));
}
cmd = 'B';
add_target (&ddb_ops);
add_target (&lsi_ops);
- deprecated_add_show_from_set
- (add_set_cmd ("timeout", no_class, var_zinteger,
- (char *) &mips_receive_wait,
- "Set timeout in seconds for remote MIPS serial I/O.",
- &setlist),
- &showlist);
-
- deprecated_add_show_from_set
- (add_set_cmd ("retransmit-timeout", no_class, var_zinteger,
- (char *) &mips_retransmit_wait, "\
-Set retransmit timeout in seconds for remote MIPS serial I/O.\n\
+ add_setshow_zinteger_cmd ("timeout", no_class, &mips_receive_wait, _("\
+Set timeout in seconds for remote MIPS serial I/O."), _("\
+Show timeout in seconds for remote MIPS serial I/O."), NULL,
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_setshow_zinteger_cmd ("retransmit-timeout", no_class,
+ &mips_retransmit_wait, _("\
+Set retransmit timeout in seconds for remote MIPS serial I/O."), _("\
+Show retransmit timeout in seconds for remote MIPS serial I/O."), _("\
This is the number of seconds to wait for an acknowledgement to a packet\n\
-before resending the packet.", &setlist),
- &showlist);
-
- deprecated_add_show_from_set
- (add_set_cmd ("syn-garbage-limit", no_class, var_zinteger,
- (char *) &mips_syn_garbage, "\
-Set the maximum number of characters to ignore when scanning for a SYN.\n\
+before resending the packet."),
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_setshow_zinteger_cmd ("syn-garbage-limit", no_class,
+ &mips_syn_garbage, _("\
+Set the maximum number of characters to ignore when scanning for a SYN."), _("\
+Show the maximum number of characters to ignore when scanning for a SYN."), _("\
This is the maximum number of characters GDB will ignore when trying to\n\
synchronize with the remote system. A value of -1 means that there is no\n\
limit. (Note that these characters are printed out even though they are\n\
-ignored.)",
- &setlist),
- &showlist);
-
- deprecated_add_show_from_set
- (add_set_cmd ("monitor-prompt", class_obscure, var_string,
- (char *) &mips_monitor_prompt,
- "Set the prompt that GDB expects from the monitor.",
- &setlist),
- &showlist);
-
- deprecated_add_show_from_set
- (add_set_cmd ("monitor-warnings", class_obscure, var_zinteger,
- (char *) &monitor_warnings,
- "Set printing of monitor warnings.\n"
- "When enabled, monitor warnings about hardware breakpoints "
- "will be displayed.",
- &setlist),
- &showlist);
-
- add_com ("pmon <command>", class_obscure, pmon_command,
- "Send a packet to PMON (must be in debug mode).");
-
- deprecated_add_show_from_set
- (add_set_cmd ("mask-address", no_class,
- var_boolean, &mask_address_p, "\
-Set zeroing of upper 32 bits of 64-bit addresses when talking to PMON targets.\n\
-Use \"on\" to enable the masking and \"off\" to disable it.\n",
- &setlist),
- &showlist);
+ignored.)"),
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_setshow_string_cmd ("monitor-prompt", class_obscure,
+ &mips_monitor_prompt, _("\
+Set the prompt that GDB expects from the monitor."), _("\
+Show the prompt that GDB expects from the monitor."), NULL,
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_setshow_zinteger_cmd ("monitor-warnings", class_obscure,
+ &monitor_warnings, _("\
+Set printing of monitor warnings."), _("\
+Show printing of monitor warnings."), _("\
+When enabled, monitor warnings about hardware breakpoints will be displayed."),
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
+
+ add_com ("pmon", class_obscure, pmon_command,
+ _("Send a packet to PMON (must be in debug mode)."));
+
+ add_setshow_boolean_cmd ("mask-address", no_class, &mask_address_p, _("\
+Set zeroing of upper 32 bits of 64-bit addresses when talking to PMON targets."), _("\
+Show zeroing of upper 32 bits of 64-bit addresses when talking to PMON targets."), _("\
+Use \"on\" to enable the masking and \"off\" to disable it."),
+ NULL,
+ NULL, /* FIXME: i18n: */
+ &setlist, &showlist);
}
OSDN Git Service
