You should have received a copy of the GNU General Public License
along with GCC; see the file COPYING. If not, write to the Free
-Software Foundation, 59 Temple Place - Suite 330, Boston, MA
-02111-1307, USA. */
+Software Foundation, 51 Franklin Street, Fifth Floor, Boston, MA
+02110-1301, USA. */
#include "config.h"
#include "system.h"
#include "coretypes.h"
#include "tm.h"
-#include "errors.h"
#include "ggc.h"
#include "tree.h"
#include "rtl.h"
#include "langhooks.h"
static void tree_ssa_phiopt (void);
-static bool conditional_replacement (basic_block, basic_block, basic_block,
+static bool conditional_replacement (basic_block, basic_block,
edge, edge, tree, tree, tree);
-static bool value_replacement (basic_block, basic_block, basic_block,
+static bool value_replacement (basic_block, basic_block,
edge, edge, tree, tree, tree);
-static bool abs_replacement (basic_block, basic_block, basic_block,
+static bool minmax_replacement (basic_block, basic_block,
+ edge, edge, tree, tree, tree);
+static bool abs_replacement (basic_block, basic_block,
edge, edge, tree, tree, tree);
-static void replace_phi_edge_with_variable (basic_block, basic_block, edge,
- tree, tree);
+static void replace_phi_edge_with_variable (basic_block, edge, tree, tree);
+static basic_block *blocks_in_phiopt_order (void);
-/* This pass eliminates PHI nodes which can be trivially implemented as
- an assignment from a conditional expression. i.e. if we have something
- like:
+/* This pass tries to replaces an if-then-else block with an
+ assignment. We have four kinds of transformations. Some of these
+ transformations are also performed by the ifcvt RTL optimizer.
+
+ Conditional Replacement
+ -----------------------
+
+ This transformation, implemented in conditional_replacement,
+ replaces
bb0:
if (cond) goto bb2; else goto bb1;
bb1:
bb2:
- x = PHI (0 (bb1), 1 (bb0)
+ x = PHI <0 (bb1), 1 (bb0), ...>;
- We can rewrite that as:
+ with
bb0:
- bb1:
+ x' = cond;
+ goto bb2;
bb2:
- x = cond;
+ x = PHI <x' (bb0), ...>;
- bb1 will become unreachable and bb0 and bb2 will almost always
- be merged into a single block. This occurs often due to gimplification
- of conditionals.
+ We remove bb1 as it becomes unreachable. This occurs often due to
+ gimplification of conditionals.
- Also done is the following optimization:
+ Value Replacement
+ -----------------
+
+ This transformation, implemented in value_replacement, replaces
bb0:
- if (a != b) goto bb2; else goto bb1;
+ if (a != b) goto bb2; else goto bb1;
bb1:
bb2:
- x = PHI (a (bb1), b (bb0))
+ x = PHI <a (bb1), b (bb0), ...>;
- We can rewrite that as:
+ with
bb0:
- bb1:
bb2:
- x = b;
+ x = PHI <b (bb0), ...>;
+
+ This opportunity can sometimes occur as a result of other
+ optimizations.
- This can sometimes occur as a result of other optimizations. A
- similar transformation is done by the ifcvt RTL optimizer.
+ ABS Replacement
+ ---------------
- This pass also eliminates PHI nodes which are really absolute
- values. i.e. if we have something like:
+ This transformation, implemented in abs_replacement, replaces
bb0:
- if (a >= 0) goto bb2; else goto bb1;
+ if (a >= 0) goto bb2; else goto bb1;
bb1:
- x = -a;
+ x = -a;
bb2:
- x = PHI (x (bb1), a (bb0));
+ x = PHI <x (bb1), a (bb0), ...>;
- We can rewrite that as:
+ with
bb0:
+ x' = ABS_EXPR< a >;
+ bb2:
+ x = PHI <x' (bb0), ...>;
+
+ MIN/MAX Replacement
+ -------------------
+
+ This transformation, minmax_replacement replaces
+
+ bb0:
+ if (a <= b) goto bb2; else goto bb1;
bb1:
bb2:
- x = ABS_EXPR< a >;
+ x = PHI <b (bb1), a (bb0), ...>;
+
+ with
+
+ bb0:
+ x' = MIN_EXPR (a, b)
+ bb2:
+ x = PHI <x' (bb0), ...>;
- bb1 will become unreachable and bb0 and bb2 will almost always be merged
- into a single block. Similar transformations are done by the ifcvt
- RTL optimizer. */
+ A similar transformation is done for MAX_EXPR. */
static void
tree_ssa_phiopt (void)
{
basic_block bb;
- bool removed_phis = false;
+ basic_block *bb_order;
+ unsigned n, i;
- /* Search every basic block for COND_EXPR we may be able to optimize
- in reverse order so we can find more. */
- FOR_EACH_BB_REVERSE (bb)
+ /* Search every basic block for COND_EXPR we may be able to optimize.
+
+ We walk the blocks in order that guarantees that a block with
+ a single predecessor is processed before the predecessor.
+ This ensures that we collapse inner ifs before visiting the
+ outer ones, and also that we do not try to visit a removed
+ block. */
+ bb_order = blocks_in_phiopt_order ();
+ n = n_basic_blocks;
+
+ for (i = 0; i < n; i++)
{
tree cond_expr;
tree phi;
basic_block bb1, bb2;
edge e1, e2;
+ tree arg0, arg1;
+
+ bb = bb_order[i];
cond_expr = last_stmt (bb);
/* Check to see if the last statement is a COND_EXPR. */
continue;
/* If either bb1's succ or bb2 or bb2's succ is non NULL. */
- if (EDGE_COUNT (bb1->succs) < 1
+ if (EDGE_COUNT (bb1->succs) == 0
|| bb2 == NULL
- || EDGE_COUNT (bb2->succs) < 1)
+ || EDGE_COUNT (bb2->succs) == 0)
continue;
/* Find the bb which is the fall through to the other. */
e1 = EDGE_SUCC (bb1, 0);
/* Make sure that bb1 is just a fall through. */
- if (EDGE_COUNT (bb1->succs) > 1
+ if (!single_succ_p (bb1)
|| (e1->flags & EDGE_FALLTHRU) == 0)
continue;
- /* Also make that bb1 only have one pred and it is bb. */
- if (EDGE_COUNT (bb1->preds) > 1
- || EDGE_PRED (bb1, 0)->src != bb)
+ /* Also make sure that bb1 only have one predecessor and that it
+ is bb. */
+ if (!single_pred_p (bb1)
+ || single_pred (bb1) != bb)
continue;
phi = phi_nodes (bb2);
/* Check to make sure that there is only one PHI node.
TODO: we could do it with more than one iff the other PHI nodes
have the same elements for these two edges. */
- if (phi && PHI_CHAIN (phi) == NULL)
- {
- tree arg0 = NULL, arg1 = NULL;
+ if (!phi || PHI_CHAIN (phi) != NULL)
+ continue;
- arg0 = PHI_ARG_DEF_TREE (phi, e1->dest_idx);
- arg1 = PHI_ARG_DEF_TREE (phi, e2->dest_idx);
+ arg0 = PHI_ARG_DEF_TREE (phi, e1->dest_idx);
+ arg1 = PHI_ARG_DEF_TREE (phi, e2->dest_idx);
- /* We know something is wrong if we cannot find the edges in the PHI
- node. */
- gcc_assert (arg0 != NULL && arg1 != NULL);
+ /* Something is wrong if we cannot find the arguments in the PHI
+ node. */
+ gcc_assert (arg0 != NULL && arg1 != NULL);
- /* Do the replacement of conditional if it can be done. */
- if (conditional_replacement (bb, bb1, bb2, e1, e2, phi, arg0, arg1)
- || value_replacement (bb, bb1, bb2, e1, e2, phi, arg0, arg1)
- || abs_replacement (bb, bb1, bb2, e1, e2, phi, arg0, arg1))
- {
- /* We have done the replacement so we need to rebuild the
- cfg when this pass is complete. */
- removed_phis = true;
- }
+ /* Do the replacement of conditional if it can be done. */
+ if (conditional_replacement (bb, bb1, e1, e2, phi, arg0, arg1))
+ ;
+ else if (value_replacement (bb, bb1, e1, e2, phi, arg0, arg1))
+ ;
+ else if (abs_replacement (bb, bb1, e1, e2, phi, arg0, arg1))
+ ;
+ else
+ minmax_replacement (bb, bb1, e1, e2, phi, arg0, arg1);
+ }
+
+ free (bb_order);
+}
+
+/* Returns the list of basic blocks in the function in an order that guarantees
+ that if a block X has just a single predecessor Y, then Y is after X in the
+ ordering. */
+
+static basic_block *
+blocks_in_phiopt_order (void)
+{
+ basic_block x, y;
+ basic_block *order = xmalloc (sizeof (basic_block) * n_basic_blocks);
+ unsigned n = n_basic_blocks, np, i;
+ sbitmap visited = sbitmap_alloc (last_basic_block + 2);
+
+#define MARK_VISITED(BB) (SET_BIT (visited, (BB)->index + 2))
+#define VISITED_P(BB) (TEST_BIT (visited, (BB)->index + 2))
+
+ sbitmap_zero (visited);
+
+ MARK_VISITED (ENTRY_BLOCK_PTR);
+ FOR_EACH_BB (x)
+ {
+ if (VISITED_P (x))
+ continue;
+
+ /* Walk the predecessors of x as long as they have precisely one
+ predecessor and add them to the list, so that they get stored
+ after x. */
+ for (y = x, np = 1;
+ single_pred_p (y) && !VISITED_P (single_pred (y));
+ y = single_pred (y))
+ np++;
+ for (y = x, i = n - np;
+ single_pred_p (y) && !VISITED_P (single_pred (y));
+ y = single_pred (y), i++)
+ {
+ order[i] = y;
+ MARK_VISITED (y);
}
+ order[i] = y;
+ MARK_VISITED (y);
+
+ gcc_assert (i == n - 1);
+ n -= np;
}
+
+ sbitmap_free (visited);
+ gcc_assert (n == 0);
+ return order;
+
+#undef MARK_VISITED
+#undef VISITED_P
}
/* Return TRUE if block BB has no executable statements, otherwise return
return true;
}
-/* Replace PHI node element whoes edge is E in block BB with variable NEW.
+/* Replace PHI node element whose edge is E in block BB with variable NEW.
Remove the edge from COND_BLOCK which does not lead to BB (COND_BLOCK
is known to have two edges, one of which must reach BB). */
static void
-replace_phi_edge_with_variable (basic_block cond_block, basic_block bb,
+replace_phi_edge_with_variable (basic_block cond_block,
edge e, tree phi, tree new)
{
+ basic_block bb = bb_for_stmt (phi);
basic_block block_to_remove;
block_stmt_iterator bsi;
/* Change the PHI argument to new. */
- PHI_ARG_DEF_TREE (phi, e->dest_idx) = new;
+ SET_USE (PHI_ARG_DEF_PTR (phi, e->dest_idx), new);
/* Remove the empty basic block. */
if (EDGE_SUCC (cond_block, 0)->dest == bb)
{
EDGE_SUCC (cond_block, 0)->flags |= EDGE_FALLTHRU;
EDGE_SUCC (cond_block, 0)->flags &= ~(EDGE_TRUE_VALUE | EDGE_FALSE_VALUE);
+ EDGE_SUCC (cond_block, 0)->probability = REG_BR_PROB_BASE;
+ EDGE_SUCC (cond_block, 0)->count += EDGE_SUCC (cond_block, 1)->count;
block_to_remove = EDGE_SUCC (cond_block, 1)->dest;
}
EDGE_SUCC (cond_block, 1)->flags |= EDGE_FALLTHRU;
EDGE_SUCC (cond_block, 1)->flags
&= ~(EDGE_TRUE_VALUE | EDGE_FALSE_VALUE);
+ EDGE_SUCC (cond_block, 1)->probability = REG_BR_PROB_BASE;
+ EDGE_SUCC (cond_block, 1)->count += EDGE_SUCC (cond_block, 0)->count;
block_to_remove = EDGE_SUCC (cond_block, 0)->dest;
}
static bool
conditional_replacement (basic_block cond_bb, basic_block middle_bb,
- basic_block phi_bb, edge e0, edge e1, tree phi,
+ edge e0, edge e1, tree phi,
tree arg0, tree arg1)
{
tree result;
if (TREE_CODE (cond) != SSA_NAME
&& !lang_hooks.types_compatible_p (TREE_TYPE (cond), TREE_TYPE (result)))
{
- new_var = make_rename_temp (TREE_TYPE (cond), NULL);
+ tree tmp;
+
+ if (!COMPARISON_CLASS_P (cond))
+ return false;
+
+ tmp = create_tmp_var (TREE_TYPE (cond), NULL);
+ add_referenced_tmp_var (tmp);
+ new_var = make_ssa_name (tmp, NULL);
old_result = cond;
cond = new_var;
}
edge so that we know when to invert the condition below. */
extract_true_false_edges_from_block (cond_bb, &true_edge, &false_edge);
- /* Insert our new statement at the end of condtional block before the
+ /* Insert our new statement at the end of conditional block before the
COND_EXPR. */
bsi = bsi_last (cond_bb);
bsi_insert_before (&bsi, build_empty_stmt (), BSI_NEW_STMT);
if (old_result)
{
tree new1;
- if (!COMPARISON_CLASS_P (old_result))
- return false;
- new1 = build (TREE_CODE (old_result), TREE_TYPE (old_result),
- TREE_OPERAND (old_result, 0),
- TREE_OPERAND (old_result, 1));
+ new1 = build2 (TREE_CODE (old_result), TREE_TYPE (old_result),
+ TREE_OPERAND (old_result, 0),
+ TREE_OPERAND (old_result, 1));
+
+ new1 = build2 (MODIFY_EXPR, TREE_TYPE (old_result), new_var, new1);
+ SSA_NAME_DEF_STMT (new_var) = new1;
- new1 = build (MODIFY_EXPR, TREE_TYPE (old_result), new_var, new1);
bsi_insert_after (&bsi, new1, BSI_NEW_STMT);
}
|| (e1 == true_edge && integer_onep (arg1))
|| (e1 == false_edge && integer_zerop (arg1)))
{
- new = build (MODIFY_EXPR, TREE_TYPE (new_var1), new_var1, cond);
+ new = build2 (MODIFY_EXPR, TREE_TYPE (new_var1), new_var1, cond);
}
else
{
tree cond1 = invert_truthvalue (cond);
cond = cond1;
+
/* If what we get back is a conditional expression, there is no
way that it can be gimple. */
if (TREE_CODE (cond) == COND_EXPR)
return false;
}
+ /* If COND is not something we can expect to be reducible to a GIMPLE
+ condition, return early. */
+ if (is_gimple_cast (cond))
+ cond1 = TREE_OPERAND (cond, 0);
+ if (TREE_CODE (cond1) == TRUTH_NOT_EXPR
+ && !is_gimple_val (TREE_OPERAND (cond1, 0)))
+ {
+ release_ssa_name (new_var1);
+ return false;
+ }
+
/* If what we get back is not gimple try to create it as gimple by
using a temporary variable. */
if (is_gimple_cast (cond)
&& !is_gimple_val (TREE_OPERAND (cond, 0)))
{
- tree temp = TREE_OPERAND (cond, 0);
- tree new_var_1 = make_rename_temp (TREE_TYPE (temp), NULL);
- new = build (MODIFY_EXPR, TREE_TYPE (new_var_1), new_var_1, temp);
- bsi_insert_after (&bsi, new, BSI_NEW_STMT);
- cond = fold_convert (TREE_TYPE (result), new_var_1);
- }
+ tree op0, tmp, cond_tmp;
- if (TREE_CODE (cond) == TRUTH_NOT_EXPR
- && !is_gimple_val (TREE_OPERAND (cond, 0)))
- {
- release_ssa_name (new_var1);
- return false;
+ /* Only "real" casts are OK here, not everything that is
+ acceptable to is_gimple_cast. Make sure we don't do
+ anything stupid here. */
+ gcc_assert (TREE_CODE (cond) == NOP_EXPR
+ || TREE_CODE (cond) == CONVERT_EXPR);
+
+ op0 = TREE_OPERAND (cond, 0);
+ tmp = create_tmp_var (TREE_TYPE (op0), NULL);
+ add_referenced_tmp_var (tmp);
+ cond_tmp = make_ssa_name (tmp, NULL);
+ new = build2 (MODIFY_EXPR, TREE_TYPE (cond_tmp), cond_tmp, op0);
+ SSA_NAME_DEF_STMT (cond_tmp) = new;
+
+ bsi_insert_after (&bsi, new, BSI_NEW_STMT);
+ cond = fold_convert (TREE_TYPE (result), cond_tmp);
}
- new = build (MODIFY_EXPR, TREE_TYPE (new_var1), new_var1, cond);
+ new = build2 (MODIFY_EXPR, TREE_TYPE (new_var1), new_var1, cond);
}
bsi_insert_after (&bsi, new, BSI_NEW_STMT);
SSA_NAME_DEF_STMT (new_var1) = new;
- replace_phi_edge_with_variable (cond_bb, phi_bb, e1, phi, new_var1);
+ replace_phi_edge_with_variable (cond_bb, e1, phi, new_var1);
/* Note that we optimized this PHI. */
return true;
static bool
value_replacement (basic_block cond_bb, basic_block middle_bb,
- basic_block phi_bb, edge e0, edge e1, tree phi,
+ edge e0, edge e1, tree phi,
tree arg0, tree arg1)
{
- tree result;
tree cond;
edge true_edge, false_edge;
return false;
cond = COND_EXPR_COND (last_stmt (cond_bb));
- result = PHI_RESULT (phi);
/* This transformation is only valid for equality comparisons. */
if (TREE_CODE (cond) != NE_EXPR && TREE_CODE (cond) != EQ_EXPR)
edge from OTHER_BLOCK which reaches BB and represents the desired
path from COND_BLOCK. */
if (e->dest == middle_bb)
- e = EDGE_SUCC (e->dest, 0);
+ e = single_succ_edge (e->dest);
/* Now we know the incoming edge to BB that has the argument for the
RHS of our new assignment statement. */
else
arg = arg1;
- replace_phi_edge_with_variable (cond_bb, phi_bb, e1, phi, arg);
+ replace_phi_edge_with_variable (cond_bb, e1, phi, arg);
/* Note that we optimized this PHI. */
return true;
return false;
}
+/* The function minmax_replacement does the main work of doing the minmax
+ replacement. Return true if the replacement is done. Otherwise return
+ false.
+ BB is the basic block where the replacement is going to be done on. ARG0
+ is argument 0 from the PHI. Likewise for ARG1. */
+
+static bool
+minmax_replacement (basic_block cond_bb, basic_block middle_bb,
+ edge e0, edge e1, tree phi,
+ tree arg0, tree arg1)
+{
+ tree result, type;
+ tree cond, new;
+ edge true_edge, false_edge;
+ enum tree_code cmp, minmax, ass_code;
+ tree smaller, larger, arg_true, arg_false;
+ block_stmt_iterator bsi, bsi_from;
+
+ type = TREE_TYPE (PHI_RESULT (phi));
+
+ /* The optimization may be unsafe due to NaNs. */
+ if (HONOR_NANS (TYPE_MODE (type)))
+ return false;
+
+ cond = COND_EXPR_COND (last_stmt (cond_bb));
+ cmp = TREE_CODE (cond);
+ result = PHI_RESULT (phi);
+
+ /* This transformation is only valid for order comparisons. Record which
+ operand is smaller/larger if the result of the comparison is true. */
+ if (cmp == LT_EXPR || cmp == LE_EXPR)
+ {
+ smaller = TREE_OPERAND (cond, 0);
+ larger = TREE_OPERAND (cond, 1);
+ }
+ else if (cmp == GT_EXPR || cmp == GE_EXPR)
+ {
+ smaller = TREE_OPERAND (cond, 1);
+ larger = TREE_OPERAND (cond, 0);
+ }
+ else
+ return false;
+
+ /* We need to know which is the true edge and which is the false
+ edge so that we know if have abs or negative abs. */
+ extract_true_false_edges_from_block (cond_bb, &true_edge, &false_edge);
+
+ /* Forward the edges over the middle basic block. */
+ if (true_edge->dest == middle_bb)
+ true_edge = EDGE_SUCC (true_edge->dest, 0);
+ if (false_edge->dest == middle_bb)
+ false_edge = EDGE_SUCC (false_edge->dest, 0);
+
+ if (true_edge == e0)
+ {
+ gcc_assert (false_edge == e1);
+ arg_true = arg0;
+ arg_false = arg1;
+ }
+ else
+ {
+ gcc_assert (false_edge == e0);
+ gcc_assert (true_edge == e1);
+ arg_true = arg1;
+ arg_false = arg0;
+ }
+
+ if (empty_block_p (middle_bb))
+ {
+ if (operand_equal_for_phi_arg_p (arg_true, smaller)
+ && operand_equal_for_phi_arg_p (arg_false, larger))
+ {
+ /* Case
+
+ if (smaller < larger)
+ rslt = smaller;
+ else
+ rslt = larger; */
+ minmax = MIN_EXPR;
+ }
+ else if (operand_equal_for_phi_arg_p (arg_false, smaller)
+ && operand_equal_for_phi_arg_p (arg_true, larger))
+ minmax = MAX_EXPR;
+ else
+ return false;
+ }
+ else
+ {
+ /* Recognize the following case, assuming d <= u:
+
+ if (a <= u)
+ b = MAX (a, d);
+ x = PHI <b, u>
+
+ This is equivalent to
+
+ b = MAX (a, d);
+ x = MIN (b, u); */
+
+ tree assign = last_and_only_stmt (middle_bb);
+ tree lhs, rhs, op0, op1, bound;
+
+ if (!assign
+ || TREE_CODE (assign) != MODIFY_EXPR)
+ return false;
+
+ lhs = TREE_OPERAND (assign, 0);
+ rhs = TREE_OPERAND (assign, 1);
+ ass_code = TREE_CODE (rhs);
+ if (ass_code != MAX_EXPR && ass_code != MIN_EXPR)
+ return false;
+ op0 = TREE_OPERAND (rhs, 0);
+ op1 = TREE_OPERAND (rhs, 1);
+
+ if (true_edge->src == middle_bb)
+ {
+ /* We got here if the condition is true, i.e., SMALLER < LARGER. */
+ if (!operand_equal_for_phi_arg_p (lhs, arg_true))
+ return false;
+
+ if (operand_equal_for_phi_arg_p (arg_false, larger))
+ {
+ /* Case
+
+ if (smaller < larger)
+ {
+ r' = MAX_EXPR (smaller, bound)
+ }
+ r = PHI <r', larger> --> to be turned to MIN_EXPR. */
+ if (ass_code != MAX_EXPR)
+ return false;
+
+ minmax = MIN_EXPR;
+ if (operand_equal_for_phi_arg_p (op0, smaller))
+ bound = op1;
+ else if (operand_equal_for_phi_arg_p (op1, smaller))
+ bound = op0;
+ else
+ return false;
+
+ /* We need BOUND <= LARGER. */
+ if (!integer_nonzerop (fold_build2 (LE_EXPR, boolean_type_node,
+ bound, larger)))
+ return false;
+ }
+ else if (operand_equal_for_phi_arg_p (arg_false, smaller))
+ {
+ /* Case
+
+ if (smaller < larger)
+ {
+ r' = MIN_EXPR (larger, bound)
+ }
+ r = PHI <r', smaller> --> to be turned to MAX_EXPR. */
+ if (ass_code != MIN_EXPR)
+ return false;
+
+ minmax = MAX_EXPR;
+ if (operand_equal_for_phi_arg_p (op0, larger))
+ bound = op1;
+ else if (operand_equal_for_phi_arg_p (op1, larger))
+ bound = op0;
+ else
+ return false;
+
+ /* We need BOUND >= SMALLER. */
+ if (!integer_nonzerop (fold_build2 (GE_EXPR, boolean_type_node,
+ bound, smaller)))
+ return false;
+ }
+ else
+ return false;
+ }
+ else
+ {
+ /* We got here if the condition is false, i.e., SMALLER > LARGER. */
+ if (!operand_equal_for_phi_arg_p (lhs, arg_false))
+ return false;
+
+ if (operand_equal_for_phi_arg_p (arg_true, larger))
+ {
+ /* Case
+
+ if (smaller > larger)
+ {
+ r' = MIN_EXPR (smaller, bound)
+ }
+ r = PHI <r', larger> --> to be turned to MAX_EXPR. */
+ if (ass_code != MIN_EXPR)
+ return false;
+
+ minmax = MAX_EXPR;
+ if (operand_equal_for_phi_arg_p (op0, smaller))
+ bound = op1;
+ else if (operand_equal_for_phi_arg_p (op1, smaller))
+ bound = op0;
+ else
+ return false;
+
+ /* We need BOUND >= LARGER. */
+ if (!integer_nonzerop (fold_build2 (GE_EXPR, boolean_type_node,
+ bound, larger)))
+ return false;
+ }
+ else if (operand_equal_for_phi_arg_p (arg_true, smaller))
+ {
+ /* Case
+
+ if (smaller > larger)
+ {
+ r' = MAX_EXPR (larger, bound)
+ }
+ r = PHI <r', smaller> --> to be turned to MIN_EXPR. */
+ if (ass_code != MAX_EXPR)
+ return false;
+
+ minmax = MIN_EXPR;
+ if (operand_equal_for_phi_arg_p (op0, larger))
+ bound = op1;
+ else if (operand_equal_for_phi_arg_p (op1, larger))
+ bound = op0;
+ else
+ return false;
+
+ /* We need BOUND <= SMALLER. */
+ if (!integer_nonzerop (fold_build2 (LE_EXPR, boolean_type_node,
+ bound, smaller)))
+ return false;
+ }
+ else
+ return false;
+ }
+
+ /* Move the statement from the middle block. */
+ bsi = bsi_last (cond_bb);
+ bsi_from = bsi_last (middle_bb);
+ bsi_move_before (&bsi_from, &bsi);
+ }
+
+ /* Emit the statement to compute min/max. */
+ result = duplicate_ssa_name (PHI_RESULT (phi), NULL);
+ new = build2 (MODIFY_EXPR, type, result,
+ build2 (minmax, type, arg0, arg1));
+ SSA_NAME_DEF_STMT (result) = new;
+ bsi = bsi_last (cond_bb);
+ bsi_insert_before (&bsi, new, BSI_NEW_STMT);
+
+ replace_phi_edge_with_variable (cond_bb, e1, phi, result);
+ return true;
+}
+
/* The function absolute_replacement does the main work of doing the absolute
replacement. Return true if the replacement is done. Otherwise return
false.
bb is the basic block where the replacement is going to be done on. arg0
- is argument 0 from the phi. Likewise for arg1. */
+ is argument 0 from the phi. Likewise for arg1. */
static bool
abs_replacement (basic_block cond_bb, basic_block middle_bb,
- basic_block phi_bb, edge e0 ATTRIBUTE_UNUSED, edge e1,
+ edge e0 ATTRIBUTE_UNUSED, edge e1,
tree phi, tree arg0, tree arg1)
{
tree result;
tree new, cond;
block_stmt_iterator bsi;
edge true_edge, false_edge;
- tree assign = NULL;
+ tree assign;
edge e;
- tree rhs = NULL, lhs = NULL;
+ tree rhs, lhs;
bool negate;
enum tree_code cond_code;
/* OTHER_BLOCK must have only one executable statement which must have the
form arg0 = -arg1 or arg1 = -arg0. */
- bsi = bsi_start (middle_bb);
- while (!bsi_end_p (bsi))
- {
- tree stmt = bsi_stmt (bsi);
-
- /* Empty statements and labels are uninteresting. */
- if (TREE_CODE (stmt) == LABEL_EXPR
- || IS_EMPTY_STMT (stmt))
- {
- bsi_next (&bsi);
- continue;
- }
-
- /* If we found the assignment, but it was not the only executable
- statement in OTHER_BLOCK, then we can not optimize. */
- if (assign)
- return false;
-
- /* If we got here, then we have found the first executable statement
- in OTHER_BLOCK. If it is anything other than arg = -arg1 or
- arg1 = -arg0, then we can not optimize. */
- if (TREE_CODE (stmt) == MODIFY_EXPR)
- {
- lhs = TREE_OPERAND (stmt, 0);
- rhs = TREE_OPERAND (stmt, 1);
-
- if (TREE_CODE (rhs) == NEGATE_EXPR)
- {
- rhs = TREE_OPERAND (rhs, 0);
-
- /* The assignment has to be arg0 = -arg1 or arg1 = -arg0. */
- if ((lhs == arg0 && rhs == arg1)
- || (lhs == arg1 && rhs == arg0))
- {
- assign = stmt;
- bsi_next (&bsi);
- }
- else
- return false;
- }
- else
- return false;
- }
- else
- return false;
- }
+ assign = last_and_only_stmt (middle_bb);
/* If we did not find the proper negation assignment, then we can not
optimize. */
if (assign == NULL)
return false;
+
+ /* If we got here, then we have found the only executable statement
+ in OTHER_BLOCK. If it is anything other than arg = -arg1 or
+ arg1 = -arg0, then we can not optimize. */
+ if (TREE_CODE (assign) != MODIFY_EXPR)
+ return false;
+
+ lhs = TREE_OPERAND (assign, 0);
+ rhs = TREE_OPERAND (assign, 1);
+
+ if (TREE_CODE (rhs) != NEGATE_EXPR)
+ return false;
+
+ rhs = TREE_OPERAND (rhs, 0);
+
+ /* The assignment has to be arg0 = -arg1 or arg1 = -arg0. */
+ if (!(lhs == arg0 && rhs == arg1)
+ && !(lhs == arg1 && rhs == arg0))
+ return false;
cond = COND_EXPR_COND (last_stmt (cond_bb));
result = PHI_RESULT (phi);
result = duplicate_ssa_name (result, NULL);
if (negate)
- lhs = make_rename_temp (TREE_TYPE (result), NULL);
+ {
+ tree tmp = create_tmp_var (TREE_TYPE (result), NULL);
+ add_referenced_tmp_var (tmp);
+ lhs = make_ssa_name (tmp, NULL);
+ }
else
lhs = result;
/* Build the modify expression with abs expression. */
- new = build (MODIFY_EXPR, TREE_TYPE (lhs),
- lhs, build1 (ABS_EXPR, TREE_TYPE (lhs), rhs));
+ new = build2 (MODIFY_EXPR, TREE_TYPE (lhs),
+ lhs, build1 (ABS_EXPR, TREE_TYPE (lhs), rhs));
+ SSA_NAME_DEF_STMT (lhs) = new;
bsi = bsi_last (cond_bb);
bsi_insert_before (&bsi, new, BSI_NEW_STMT);
/* Get the right BSI. We want to insert after the recently
added ABS_EXPR statement (which we know is the first statement
in the block. */
- new = build (MODIFY_EXPR, TREE_TYPE (result),
- result, build1 (NEGATE_EXPR, TREE_TYPE (lhs), lhs));
+ new = build2 (MODIFY_EXPR, TREE_TYPE (result),
+ result, build1 (NEGATE_EXPR, TREE_TYPE (lhs), lhs));
+ SSA_NAME_DEF_STMT (result) = new;
bsi_insert_after (&bsi, new, BSI_NEW_STMT);
}
- SSA_NAME_DEF_STMT (result) = new;
- replace_phi_edge_with_variable (cond_bb, phi_bb, e1, phi, result);
+ replace_phi_edge_with_variable (cond_bb, e1, phi, result);
/* Note that we optimized this PHI. */
return true;
0, /* properties_provided */
0, /* properties_destroyed */
0, /* todo_flags_start */
- TODO_cleanup_cfg | TODO_dump_func | TODO_ggc_collect /* todo_flags_finish */
- | TODO_verify_ssa | TODO_rename_vars
- | TODO_verify_flow | TODO_verify_stmts,
+ TODO_cleanup_cfg
+ | TODO_dump_func
+ | TODO_ggc_collect
+ | TODO_verify_ssa
+ | TODO_verify_flow
+ | TODO_verify_stmts, /* todo_flags_finish */
0 /* letter */
};
OSDN Git Service
