-%% TeX macros to handle Texinfo files.
-%% $Id: texinfo.tex,v 2.203 1997/06/05 22:04:25 karl Exp karl $
-
-% Copyright (C) 1985, 86, 88, 90, 91, 92, 93,
-% 94, 95, 96, 97 Free Software Foundation, Inc.
-
-%This texinfo.tex file is free software; you can redistribute it and/or
-%modify it under the terms of the GNU General Public License as
-%published by the Free Software Foundation; either version 2, or (at
-%your option) any later version.
-
-%This texinfo.tex file is distributed in the hope that it will be
-%useful, but WITHOUT ANY WARRANTY; without even the implied warranty
-%of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-%General Public License for more details.
-
-%You should have received a copy of the GNU General Public License
-%along with this texinfo.tex file; see the file COPYING. If not, write
-%to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
-%Boston, MA 02111-1307, USA.
-
-
-%In other words, you are welcome to use, share and improve this program.
-%You are forbidden to forbid anyone else to use, share and improve
-%what you give them. Help stamp out software-hoarding!
-
-
-% Send bug reports to bug-texinfo@prep.ai.mit.edu.
-% Please include a *precise* test case in each bug report.
-
-
-% Make it possible to create a .fmt file just by loading this file:
-% if the underlying format is not loaded, start by loading it now.
-% Added by gildea November 1993.
+% texinfo.tex -- TeX macros to handle Texinfo files.
+%
+% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
-
-% This automatically updates the version number based on RCS.
-\def\deftexinfoversion$#1: #2 ${\def\texinfoversion{#2}}
-\deftexinfoversion$Revision: 2.203 $
-\message{Loading texinfo package [Version \texinfoversion]:}
+%
+\def\texinfoversion{1998-11-13}%
+%
+% Copyright (C) 1985, 86, 88, 90, 91, 92, 93, 94, 95, 96, 97, 98
+% Free Software Foundation, Inc.
+%
+% This texinfo.tex file is free software; you can redistribute it and/or
+% modify it under the terms of the GNU General Public License as
+% published by the Free Software Foundation; either version 2, or (at
+% your option) any later version.
+%
+% This texinfo.tex file is distributed in the hope that it will be
+% useful, but WITHOUT ANY WARRANTY; without even the implied warranty
+% of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+% General Public License for more details.
+%
+% You should have received a copy of the GNU General Public License
+% along with this texinfo.tex file; see the file COPYING. If not, write
+% to the Free Software Foundation, Inc., 59 Temple Place - Suite 330,
+% Boston, MA 02111-1307, USA.
+%
+% In other words, you are welcome to use, share and improve this program.
+% You are forbidden to forbid anyone else to use, share and improve
+% what you give them. Help stamp out software-hoarding!
+%
+% Please try the latest version of texinfo.tex before submitting bug
+% reports; you can get the latest version from:
+% ftp://ftp.gnu.org/pub/gnu/texinfo.tex
+% /home/gd/gnu/doc/texinfo.tex on the GNU machines.
+% (and all GNU mirrors, see ftp://ftp.gnu.org/pub/gnu/README.mirrors)
+% ftp://tug.org/tex/texinfo.tex
+% ftp://ctan.org/macros/texinfo/texinfo.tex
+% (and all CTAN mirrors, finger ctan@tug.org for a list).
+% The texinfo.tex in the texinfo distribution itself could well be out
+% of date, so if that's what you're using, please check.
+%
+% Send bug reports to bug-texinfo@gnu.org.
+% Please include a precise test case in each bug report,
+% including a complete document with which we can reproduce the problem.
+%
+% To process a Texinfo manual with TeX, it's most reliable to use the
+% texi2dvi shell script that comes with the distribution. For simple
+% manuals, you can get away with:
+% tex foo.texi
+% texindex foo.??
+% tex foo.texi
+% tex foo.texi
+% dvips foo.dvi -o # or whatever, to process the dvi file.
+% The extra runs of TeX get the cross-reference information correct.
+% Sometimes one run after texindex suffices, and sometimes you need more
+% than two; texi2dvi does it as many times as necessary.
+
+\message{Loading texinfo [version \texinfoversion]:}
% If in a .fmt file, print the version number
% and turn on active characters that we couldn't do earlier because
% they might have appeared in the input file name.
-\everyjob{\message{[Texinfo version \texinfoversion]}\message{}
+\everyjob{\message{[Texinfo version \texinfoversion]}%
\catcode`+=\active \catcode`\_=\active}
% Save some parts of plain tex whose names we will redefine.
\let\ptexdot=\.
\let\ptexdots=\dots
\let\ptexend=\end
-\let\ptexequiv = \equiv
+\let\ptexequiv=\equiv
+\let\ptexexclam=\!
\let\ptexi=\i
\let\ptexlbrace=\{
\let\ptexrbrace=\}
\let\ptexstar=\*
\let\ptext=\t
-% Be sure we're in horizontal mode when doing a tie, since we make space
-% equivalent to this in @example-like environments. Otherwise, a space
-% at the beginning of a line will start with \penalty -- and
-% since \penalty is valid in vertical mode, we'd end up putting the
-% penalty on the vertical list instead of in the new paragraph.
-{\catcode`@ = 11
- % Avoid using \@M directly, because that causes trouble
- % if the definition is written into an index file.
- \global\let\tiepenalty = \@M
- \gdef\tie{\leavevmode\penalty\tiepenalty\ }
-}
+% We never want plain's outer \+ definition in Texinfo.
+% For @tex, we can use \tabalign.
+\let\+ = \relax
\message{Basics,}
% starts a new line in the output.
\newlinechar = `^^J
-% Set up fixed words for English.
-\ifx\putwordChapter\undefined{\gdef\putwordChapter{Chapter}}\fi%
-\def\putwordInfo{Info}%
-\ifx\putwordSee\undefined{\gdef\putwordSee{See}}\fi%
-\ifx\putwordsee\undefined{\gdef\putwordsee{see}}\fi%
-\ifx\putwordfile\undefined{\gdef\putwordfile{file}}\fi%
-\ifx\putwordpage\undefined{\gdef\putwordpage{page}}\fi%
-\ifx\putwordsection\undefined{\gdef\putwordsection{section}}\fi%
-\ifx\putwordSection\undefined{\gdef\putwordSection{Section}}\fi%
-\ifx\putwordTableofContents\undefined{\gdef\putwordTableofContents{Table of Contents}}\fi%
-\ifx\putwordShortContents\undefined{\gdef\putwordShortContents{Short Contents}}\fi%
-\ifx\putwordAppendix\undefined{\gdef\putwordAppendix{Appendix}}\fi%
+% Set up fixed words for English if not already set.
+\ifx\putwordAppendix\undefined \gdef\putwordAppendix{Appendix}\fi
+\ifx\putwordChapter\undefined \gdef\putwordChapter{Chapter}\fi
+\ifx\putwordfile\undefined \gdef\putwordfile{file}\fi
+\ifx\putwordInfo\undefined \gdef\putwordfile{Info}\fi
+\ifx\putwordMethodon\undefined \gdef\putwordMethodon{Method on}\fi
+\ifx\putwordon\undefined \gdef\putwordon{on}\fi
+\ifx\putwordpage\undefined \gdef\putwordpage{page}\fi
+\ifx\putwordsection\undefined \gdef\putwordsection{section}\fi
+\ifx\putwordSection\undefined \gdef\putwordSection{Section}\fi
+\ifx\putwordsee\undefined \gdef\putwordsee{see}\fi
+\ifx\putwordSee\undefined \gdef\putwordSee{See}\fi
+\ifx\putwordShortContents\undefined \gdef\putwordShortContents{Short Contents}\fi
+\ifx\putwordTableofContents\undefined\gdef\putwordTableofContents{Table of Contents}\fi
% Ignore a token.
%
\hyphenation{ap-pen-dix}
\hyphenation{mini-buf-fer mini-buf-fers}
\hyphenation{eshell}
+\hyphenation{white-space}
% Margin to add to right of even pages, to left of odd pages.
\newdimen \bindingoffset
% Dimensions to add cropmarks at corners.
% Added by P. A. MacKay, 12 Nov. 1986
%
-\newdimen\cornerlong \newdimen\cornerthick
-\newdimen\topandbottommargin
-\newdimen\outerhsize \newdimen\outervsize
-\cornerlong=1pc\cornerthick=.3pt % These set size of cropmarks
-\outerhsize=7in
-%\outervsize=9.5in
-% Alternative @smallbook page size is 9.25in
-\outervsize=9.25in
-\topandbottommargin=.75in
+\newdimen\outerhsize \newdimen\outervsize % set by the paper size routines
+\newdimen\cornerlong \cornerlong=1pc
+\newdimen\cornerthick \cornerthick=.3pt
+\newdimen\topandbottommargin \topandbottommargin=.75in
% Main output routine.
\chardef\PAGE = 255
\shipout\vbox{%
\ifcropmarks \vbox to \outervsize\bgroup
\hsize = \outerhsize
- \line{\ewtop\hfil\ewtop}%
- \nointerlineskip
- \line{%
- \vbox{\moveleft\cornerthick\nstop}%
- \hfill
- \vbox{\moveright\cornerthick\nstop}%
- }%
+ \vskip-\topandbottommargin
+ \vtop to0pt{%
+ \line{\ewtop\hfil\ewtop}%
+ \nointerlineskip
+ \line{%
+ \vbox{\moveleft\cornerthick\nstop}%
+ \hfill
+ \vbox{\moveright\cornerthick\nstop}%
+ }%
+ \vss}%
\vskip\topandbottommargin
\line\bgroup
\hfil % center the page within the outer (page) hsize.
%
\unvbox\headlinebox
\pagebody{#1}%
- \unvbox\footlinebox
+ \ifdim\ht\footlinebox > 0pt
+ % Only leave this space if the footline is nonempty.
+ % (We lessened \vsize for it in \oddfootingxxx.)
+ % The \baselineskip=24pt in plain's \makefootline has no effect.
+ \vskip 2\baselineskip
+ \unvbox\footlinebox
+ \fi
%
\ifcropmarks
\egroup % end of \vbox\bgroup
\hfil\egroup % end of (centering) \line\bgroup
\vskip\topandbottommargin plus1fill minus1fill
\boxmaxdepth = \cornerthick
- \line{%
- \vbox{\moveleft\cornerthick\nsbot}%
- \hfill
- \vbox{\moveright\cornerthick\nsbot}%
+ \vbox to0pt{\vss
+ \line{%
+ \vbox{\moveleft\cornerthick\nsbot}%
+ \hfill
+ \vbox{\moveright\cornerthick\nsbot}%
+ }%
+ \nointerlineskip
+ \line{\ewbot\hfil\ewbot}%
}%
- \nointerlineskip
- \line{\ewbot\hfil\ewbot}%
\egroup % \vbox from first cropmarks clause
\fi
}% end of \shipout\vbox
% @@ prints an @
% Kludge this until the fonts are right (grr).
-\def\@{{\tt \char '100}}
+\def\@{{\tt\char64}}
% This is turned off because it was never documented
% and you can use @w{...} around a quote to suppress ligatures.
%\def\'{{'}}
% Used to generate quoted braces.
-\def\mylbrace {{\tt \char '173}}
-\def\myrbrace {{\tt \char '175}}
+\def\mylbrace {{\tt\char123}}
+\def\myrbrace {{\tt\char125}}
\let\{=\mylbrace
\let\}=\myrbrace
\begingroup
\fi\fi
}
+% Be sure we're in horizontal mode when doing a tie, since we make space
+% equivalent to this in @example-like environments. Otherwise, a space
+% at the beginning of a line will start with \penalty -- and
+% since \penalty is valid in vertical mode, we'd end up putting the
+% penalty on the vertical list instead of in the new paragraph.
+{\catcode`@ = 11
+ % Avoid using \@M directly, because that causes trouble
+ % if the definition is written into an index file.
+ \global\let\tiepenalty = \@M
+ \gdef\tie{\leavevmode\penalty\tiepenalty\ }
+}
+
% @: forces normal size whitespace following.
\def\:{\spacefactor=1000 }
% @. is an end-of-sentence period.
\def\.{.\spacefactor=3000 }
-% @enddots{} is an end-of-sentence ellipsis.
-\gdef\enddots{$\mathinner{\ldotp\ldotp\ldotp\ldotp}$\spacefactor=3000}
-
% @! is an end-of-sentence bang.
-\gdef\!{!\spacefactor=3000 }
+\def\!{!\spacefactor=3000 }
% @? is an end-of-sentence query.
-\gdef\?{?\spacefactor=3000 }
+\def\?{?\spacefactor=3000 }
% @w prevents a word break. Without the \leavevmode, @w at the
% beginning of a paragraph, when TeX is still in vertical mode, would
\let\br = \par
-% @dots{} output some dots
+% @dots{} output an ellipsis using the current font.
+% We do .5em per period so that it has the same spacing in a typewriter
+% font as three actual period characters.
+%
+\def\dots{\hbox to 1.5em{%
+ \hskip 0pt plus 0.25fil minus 0.25fil
+ .\hss.\hss.%
+ \hskip 0pt plus 0.5fil minus 0.5fil
+}}
+
+% @enddots{} is an end-of-sentence ellipsis.
+%
+\def\enddots{%
+ \hbox to 2em{%
+ \hskip 0pt plus 0.25fil minus 0.25fil
+ .\hss.\hss.\hss.%
+ \hskip 0pt plus 0.5fil minus 0.5fil
+ }%
+ \spacefactor=3000
+}
-\def\dots{$\ldots$}
% @page forces the start of a new page
%
\def\ignore{\doignore{ignore}}
-% Also ignore @ifinfo, @ifhtml, @html, @menu, and @direntry text.
+% Ignore @ifinfo, @ifhtml, @ifnottex, @html, @menu, and @direntry text.
%
\def\ifinfo{\doignore{ifinfo}}
\def\ifhtml{\doignore{ifhtml}}
+\def\ifnottex{\doignore{ifnottex}}
\def\html{\doignore{html}}
\def\menu{\doignore{menu}}
\def\direntry{\doignore{direntry}}
-% Also ignore @macro ... @end macro. The user must run texi2dvi,
-% which runs makeinfo to do macro expansion. Ignore @unmacro, too.
-\def\macro{\doignore{macro}}
-\let\unmacro = \comment
-
-
% @dircategory CATEGORY -- specify a category of the dir file
% which this file should belong to. Ignore this in TeX.
\let\dircategory = \comment
\ignoresections
%
% Define a command to swallow text until we reach `@end #1'.
- \long\def\doignoretext##1\end #1{\enddoignore}%
+ % This @ is a catcode 12 token (that is the normal catcode of @ in
+ % this texinfo.tex file). We change the catcode of @ below to match.
+ \long\def\doignoretext##1@end #1{\enddoignore}%
%
% Make sure that spaces turn into tokens that match what \doignoretext wants.
\catcode32 = 10
%
+ % Ignore braces, too, so mismatched braces don't cause trouble.
+ \catcode`\{ = 9
+ \catcode`\} = 9
+ %
+ % We must not have @c interpreted as a control sequence.
+ \catcode`\@ = 12
+ %
+ % Make the letter c a comment character so that the rest of the line
+ % will be ignored. This way, the document can have (for example)
+ % @c @end ifinfo
+ % and the @end ifinfo will be properly ignored.
+ % (We've just changed @ to catcode 12.)
+ \catcode`\c = 14
+ %
% And now expand that command.
\doignoretext
}
\immediate\write16{If you are running another version of TeX, relax.}
\immediate\write16{If you are running Unix TeX 3.0, kill this TeX process.}
\immediate\write16{ Then upgrade your TeX installation if you can.}
- \immediate\write16{ (See ftp://ftp.gnu.ai.mit.edu/pub/gnu/TeX.README.)}
+ \immediate\write16{ (See ftp://ftp.gnu.org/pub/gnu/TeX.README.)}
\immediate\write16{If you are stuck with version 3.0, run the}
\immediate\write16{ script ``tex3patch'' from the Texinfo distribution}
\immediate\write16{ to use a workaround.}
\pretolerance = 10000
%
% Do not execute instructions in @tex
- \def\tex{\doignore{tex}}
+ \def\tex{\doignore{tex}}%
}
% @set VAR sets the variable VAR to an empty value.
\def\value{\begingroup
\catcode`\-=12 \catcode`\_=12 % Allow - and _ in VAR.
\valuexxx}
-\def\valuexxx#1{%
+\def\valuexxx#1{\expandablevalue{#1}\endgroup}
+
+% We have this subroutine so that we can handle at least some @value's
+% properly in indexes (we \let\value to this in \indexdummies). Ones
+% whose names contain - or _ still won't work, but we can't do anything
+% about that. The command has to be fully expandable, since the result
+% winds up in the index file. This means that if the variable's value
+% contains other Texinfo commands, it's almost certain it will fail
+% (although perhaps we could fix that with sufficient work to do a
+% one-level expansion on the result, instead of complete).
+%
+\def\expandablevalue#1{%
\expandafter\ifx\csname SET#1\endcsname\relax
- {\{No value for ``#1''\}}%
+ {[No value for ``#1'']}%
\else
\csname SET#1\endcsname
\fi
-\endgroup}
+}
% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
% with @set.
\def\ifclearfail{\nestedignore{ifclear}}
\defineunmatchedend{ifclear}
-% @iftex always succeeds; we read the text following, through @end
-% iftex). But `@end iftex' should be valid only after an @iftex.
+% @iftex, @ifnothtml, @ifnotinfo always succeed; we read the text
+% following, through the first @end iftex (etc.). Make `@end iftex'
+% (etc.) valid only after an @iftex.
%
\def\iftex{\conditionalsucceed{iftex}}
+\def\ifnothtml{\conditionalsucceed{ifnothtml}}
+\def\ifnotinfo{\conditionalsucceed{ifnotinfo}}
\defineunmatchedend{iftex}
+\defineunmatchedend{ifnothtml}
+\defineunmatchedend{ifnotinfo}
% We can't just want to start a group at @iftex (for example) and end it
% at @end iftex, since then @set commands inside the conditional have no
% @refill is a no-op.
\let\refill=\relax
+% If working on a large document in chapters, it is convenient to
+% be able to disable indexing, cross-referencing, and contents, for test runs.
+% This is done with @novalidate (before @setfilename).
+%
+\newif\iflinks \linkstrue % by default we want the aux files.
+\let\novalidate = \linksfalse
+
% @setfilename is done at the beginning of every texinfo file.
% So open here the files we need to have open while reading the input.
% This makes it possible to make a .fmt file for texinfo.
\def\setfilename{%
- \readauxfile
- \opencontents
+ \iflinks
+ \readauxfile
+ \opencontents
+ \fi % \openindices needs to do some work in any case.
\openindices
\fixbackslash % Turn off hack to swallow `\input texinfo'.
\global\let\setfilename=\comment % Ignore extra @setfilename cmds.
+ %
+ % If texinfo.cnf is present on the system, read it.
+ % Useful for site-wide @afourpaper, etc.
+ % Just to be on the safe side, close the input stream before the \input.
+ \openin 1 texinfo.cnf
+ \ifeof1 \let\temp=\relax \else \def\temp{\input texinfo.cnf }\fi
+ \closein1
+ \temp
+ %
\comment % Ignore the actual filename.
}
+% Called from \setfilename.
+%
+\def\openindices{%
+ \newindex{cp}%
+ \newcodeindex{fn}%
+ \newcodeindex{vr}%
+ \newcodeindex{tp}%
+ \newcodeindex{ky}%
+ \newcodeindex{pg}%
+}
+
% @bye.
\outer\def\bye{\pagealignmacro\tracingstats=1\ptexend}
-% \def\macro#1{\begingroup\ignoresections\catcode`\#=6\def\macrotemp{#1}\parsearg\macroxxx}
-% \def\macroxxx#1#2 \end macro{%
-% \expandafter\gdef\macrotemp#1{#2}%
-% \endgroup}
-
-%\def\linemacro#1{\begingroup\ignoresections\catcode`\#=6\def\macrotemp{#1}\parsearg\linemacroxxx}
-%\def\linemacroxxx#1#2 \end linemacro{%
-%\let\parsearg=\relax
-%\edef\macrotempx{\csname M\butfirst\expandafter\string\macrotemp\endcsname}%
-%\expandafter\xdef\macrotemp{\parsearg\macrotempx}%
-%\expandafter\gdef\macrotempx#1{#2}%
-%\endgroup}
-
-%\def\butfirst#1{}
-
\message{fonts,}
-
% Font-change commands.
-% Texinfo supports the sans serif font style, which plain TeX does not.
+% Texinfo sort of supports the sans serif font style, which plain TeX does not.
% So we set up a \sf analogous to plain's \rm, etc.
\newfam\sffam
\def\sf{\fam=\sffam \tensf}
\font\indi=cmmi9
\font\indsy=cmsy9
+% Fonts for title page:
+\setfont\titlerm\rmbshape{12}{\magstep3}
+\setfont\titleit\itbshape{10}{\magstep4}
+\setfont\titlesl\slbshape{10}{\magstep4}
+\setfont\titlett\ttbshape{12}{\magstep3}
+\setfont\titlettsl\ttslshape{10}{\magstep4}
+\setfont\titlesf\sfbshape{17}{\magstep1}
+\let\titlebf=\titlerm
+\setfont\titlesc\scbshape{10}{\magstep4}
+\font\titlei=cmmi12 scaled \magstep3
+\font\titlesy=cmsy10 scaled \magstep4
+\def\authorrm{\secrm}
+
% Chapter (and unnumbered) fonts (17.28pt).
\setfont\chaprm\rmbshape{12}{\magstep2}
\setfont\chapit\itbshape{10}{\magstep3}
\setfont\chapsl\slbshape{10}{\magstep3}
\setfont\chaptt\ttbshape{12}{\magstep2}
\setfont\chapttsl\ttslshape{10}{\magstep3}
-\setfont\chapsf\sfbshape{12}{\magstep2}
+\setfont\chapsf\sfbshape{17}{1000}
\let\chapbf=\chaprm
\setfont\chapsc\scbshape{10}{\magstep3}
\font\chapi=cmmi12 scaled \magstep2
\setfont\ssecit\itbshape{10}{1315}
\setfont\ssecsl\slbshape{10}{1315}
\setfont\ssectt\ttbshape{12}{\magstephalf}
-\setfont\ssecttsl\ttslshape{10}{\magstep1}
+\setfont\ssecttsl\ttslshape{10}{1315}
\setfont\ssecsf\sfbshape{12}{\magstephalf}
\let\ssecbf\ssecrm
\setfont\ssecsc\scbshape{10}{\magstep1}
\font\sseci=cmmi12 scaled \magstephalf
-\font\ssecsy=cmsy10 scaled \magstep1
+\font\ssecsy=cmsy10 scaled 1315
% The smallcaps and symbol fonts should actually be scaled \magstep1.5,
% but that is not a standard magnification.
-% Fonts for title page:
-\setfont\titlerm\rmbshape{12}{\magstep3}
-\let\authorrm = \secrm
-
% In order for the font changes to affect most math symbols and letters,
% we have to define the \textfont of the standard families. Since
% texinfo doesn't allow for producing subscripts and superscripts, we
\let\tenbf=\textbf \let\tentt=\texttt \let\smallcaps=\textsc
\let\tensf=\textsf \let\teni=\texti \let\tensy=\textsy \let\tenttsl=\textttsl
\resetmathfonts}
+\def\titlefonts{%
+ \let\tenrm=\titlerm \let\tenit=\titleit \let\tensl=\titlesl
+ \let\tenbf=\titlebf \let\tentt=\titlett \let\smallcaps=\titlesc
+ \let\tensf=\titlesf \let\teni=\titlei \let\tensy=\titlesy
+ \let\tenttsl=\titlettsl
+ \resetmathfonts \setleading{25pt}}
+\def\titlefont#1{{\titlefonts\rm #1}}
\def\chapfonts{%
\let\tenrm=\chaprm \let\tenit=\chapit \let\tensl=\chapsl
\let\tenbf=\chapbf \let\tentt=\chaptt \let\smallcaps=\chapsc
%
\textfonts
+% Define these so they can be easily changed for other fonts.
+\def\angleleft{$\langle$}
+\def\angleright{$\rangle$}
+
% Count depth in font-changes, for error checks
\newcount\fontdepth \fontdepth=0
\null
}
\let\ttfont=\t
-\def\samp #1{`\tclose{#1}'\null}
+\def\samp#1{`\tclose{#1}'\null}
\setfont\smallrm\rmshape{8}{1000}
\font\smallsy=cmsy9
\def\key#1{{\smallrm\textfont2=\smallsy \leavevmode\hbox{%
- \raise0.4pt\hbox{$\langle$}\kern-.08em\vtop{%
+ \raise0.4pt\hbox{\angleleft}\kern-.08em\vtop{%
\vbox{\hrule\kern-0.4pt
- \hbox{\raise0.4pt\hbox{\vphantom{$\langle$}}#1}}%
+ \hbox{\raise0.4pt\hbox{\vphantom{\angleleft}}#1}}%
\kern-0.4pt\hrule}%
- \kern-.06em\raise0.4pt\hbox{$\rangle$}}}}
+ \kern-.06em\raise0.4pt\hbox{\angleright}}}}
% The old definition, with no lozenge:
%\def\key #1{{\ttsl \nohyphenation \uppercase{#1}}\null}
\def\ctrl #1{{\tt \rawbackslash \hat}#1}
% @kbd is like @code, except that if the argument is just one @key command,
% then @kbd has no effect.
-%
+
+% @kbdinputstyle -- arg is `distinct' (@kbd uses slanted tty font always),
+% `example' (@kbd uses ttsl only inside of @example and friends),
+% or `code' (@kbd uses normal tty font always).
+\def\kbdinputstyle{\parsearg\kbdinputstylexxx}
+\def\kbdinputstylexxx#1{%
+ \def\arg{#1}%
+ \ifx\arg\worddistinct
+ \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}%
+ \else\ifx\arg\wordexample
+ \gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\tt}%
+ \else\ifx\arg\wordcode
+ \gdef\kbdexamplefont{\tt}\gdef\kbdfont{\tt}%
+ \fi\fi\fi
+}
+\def\worddistinct{distinct}
+\def\wordexample{example}
+\def\wordcode{code}
+
+% Default is kbdinputdistinct. (Too much of a hassle to call the macro,
+% the catcodes are wrong for parsearg to work.)
+\gdef\kbdexamplefont{\ttsl}\gdef\kbdfont{\ttsl}
+
\def\xkey{\key}
\def\kbdfoo#1#2#3\par{\def\one{#1}\def\three{#3}\def\threex{??}%
\ifx\one\xkey\ifx\threex\three \key{#2}%
-\else{\tclose{\ttsl\look}}\fi
-\else{\tclose{\ttsl\look}}\fi}
+\else{\tclose{\kbdfont\look}}\fi
+\else{\tclose{\kbdfont\look}}\fi}
-% @url, @email. Quotes do not seem necessary.
-\let\url=\code % perhaps include a hypertex \special eventually
-% rms does not like the angle brackets --karl, 17may97.
-%\def\email#1{$\langle${\tt #1}$\rangle$}
-\let\email=\code
+% @url. Quotes do not seem necessary, so use \code.
+\let\url=\code
% @uref (abbreviation for `urlref') takes an optional second argument
% specifying the text to display. First (mandatory) arg is the url.
+% Perhaps eventually put in a hypertex \special here.
%
\def\uref#1{\urefxxx #1,,\finish}
\def\urefxxx#1,#2,#3\finish{%
\fi
}
+% rms does not like the angle brackets --karl, 17may97.
+% So now @email is just like @uref.
+%\def\email#1{\angleleft{\tt #1}\angleright}
+\let\email=\uref
+
% Check if we are currently using a typewriter font. Since all the
% Computer Modern typewriter fonts have zero interword stretch (and
% shrink), and it is reasonable to expect all typewriter fonts to have
\newskip\titlepagebottomglue \titlepagebottomglue = 2pc
% First the title page. Must do @settitle before @titlepage.
-\def\titlefont#1{{\titlerm #1}}
-
\newif\ifseenauthor
\newif\iffinishedtitlepage
%
% Now you can print the title using @title.
\def\title{\parsearg\titlezzz}%
- \def\titlezzz##1{\leftline{\titlefont{##1}}
+ \def\titlezzz##1{\leftline{\titlefonts\rm ##1}
% print a rule at the page bottom also.
\finishedtitlepagefalse
\vskip4pt \hrule height 4pt width \hsize \vskip4pt}%
\gdef\oddheadingyyy #1@|#2@|#3@|#4\finish{%
\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
-\gdef\everyheadingxxx #1{\everyheadingyyy #1@|@|@|@|\finish}
-\gdef\everyheadingyyy #1@|#2@|#3@|#4\finish{%
-\global\evenheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}
-\global\oddheadline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+\gdef\everyheadingxxx#1{\oddheadingxxx{#1}\evenheadingxxx{#1}}%
\gdef\evenfootingxxx #1{\evenfootingyyy #1@|@|@|@|\finish}
\gdef\evenfootingyyy #1@|#2@|#3@|#4\finish{%
\gdef\oddfootingxxx #1{\oddfootingyyy #1@|@|@|@|\finish}
\gdef\oddfootingyyy #1@|#2@|#3@|#4\finish{%
-\global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+ \global\oddfootline = {\rlap{\centerline{#2}}\line{#1\hfil#3}}%
+ %
+ % Leave some space for the footline. Hopefully ok to assume
+ % @evenfooting will not be used by itself.
+ \global\advance\pageheight by -\baselineskip
+ \global\advance\vsize by -\baselineskip
+}
-\gdef\everyfootingxxx #1{\everyfootingyyy #1@|@|@|@|\finish}
-\gdef\everyfootingyyy #1@|#2@|#3@|#4\finish{%
-\global\evenfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}
-\global\oddfootline={\rlap{\centerline{#2}}\line{#1\hfil#3}}}
+\gdef\everyfootingxxx#1{\oddfootingxxx{#1}\evenfootingxxx{#1}}
%
}% unbind the catcode of @.
\message{tables,}
-
-% @tabs -- simple alignment
-
-% These don't work. For one thing, \+ is defined as outer.
-% So these macros cannot even be defined.
-
-%\def\tabs{\parsearg\tabszzz}
-%\def\tabszzz #1{\settabs\+#1\cr}
-%\def\tabline{\parsearg\tablinezzz}
-%\def\tablinezzz #1{\+#1\cr}
-%\def\&{&}
-
% Tables -- @table, @ftable, @vtable, @item(x), @kitem(x), @xitem(x).
% default indentation of table text
\def\itemize{\parsearg\itemizezzz}
\def\itemizezzz #1{%
- \begingroup % ended by the @end itemsize
+ \begingroup % ended by the @end itemize
\itemizey {#1}{\Eitemize}
}
% @multitablelinespace is space to leave between table items, baseline
% to baseline.
% 0pt means it depends on current normal line spacing.
-
-%%%%
-% Dimensions
-
+%
\newskip\multitableparskip
\newskip\multitableparindent
\newdimen\multitablecolspace
\multitablecolspace=12pt
\multitablelinespace=0pt
-%%%%
% Macros used to set up halign preamble:
+%
\let\endsetuptable\relax
\def\xendsetuptable{\endsetuptable}
\let\columnfractions\relax
\def\xcolumnfractions{\columnfractions}
\newif\ifsetpercent
-%% 2/1/96, to allow fractions to be given with more than one digit.
+% 2/1/96, to allow fractions to be given with more than one digit.
\def\pickupwholefraction#1 {\global\advance\colcount by1 %
\expandafter\xdef\csname col\the\colcount\endcsname{.#1\hsize}%
\setuptable}
\ifx\go\pickupwholefraction\else\let\go\setuptable\fi%
\fi\go}
-%%%%
% multitable syntax
\def\tab{&\hskip1sp\relax} % 2/2/96
% tiny skip here makes sure this column space is
% maintained, even if it is never used.
-
-%%%%
% @multitable ... @end multitable definitions:
\def\multitable{\parsearg\dotable}
-
\def\dotable#1{\bgroup
-\let\item\cr
-\tolerance=9500
-\hbadness=9500
-\setmultitablespacing
-\parskip=\multitableparskip
-\parindent=\multitableparindent
-\overfullrule=0pt
-\global\colcount=0\relax%
-\def\Emultitable{\global\setpercentfalse\global\everycr{}\cr\egroup\egroup}%
- % To parse everything between @multitable and @item :
-\setuptable#1 \endsetuptable
- % Need to reset this to 0 after \setuptable.
-\global\colcount=0\relax%
- %
- % This preamble sets up a generic column definition, which will
- % be used as many times as user calls for columns.
- % \vtop will set a single line and will also let text wrap and
- % continue for many paragraphs if desired.
-\halign\bgroup&\global\advance\colcount by 1\relax%
-\multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
- % In order to keep entries from bumping into each other
- % we will add a \leftskip of \multitablecolspace to all columns after
- % the first one.
- % If a template has been used, we will add \multitablecolspace
- % to the width of each template entry.
- % If user has set preamble in terms of percent of \hsize
- % we will use that dimension as the width of the column, and
- % the \leftskip will keep entries from bumping into each other.
- % Table will start at left margin and final column will justify at
- % right margin.
-\ifnum\colcount=1
-\else
- \ifsetpercent
+ \vskip\parskip
+ \let\item\crcr
+ \tolerance=9500
+ \hbadness=9500
+ \setmultitablespacing
+ \parskip=\multitableparskip
+ \parindent=\multitableparindent
+ \overfullrule=0pt
+ \global\colcount=0
+ \def\Emultitable{\global\setpercentfalse\cr\egroup\egroup}%
+ %
+ % To parse everything between @multitable and @item:
+ \setuptable#1 \endsetuptable
+ %
+ % \everycr will reset column counter, \colcount, at the end of
+ % each line. Every column entry will cause \colcount to advance by one.
+ % The table preamble
+ % looks at the current \colcount to find the correct column width.
+ \everycr{\noalign{%
+ %
+ % \filbreak%% keeps underfull box messages off when table breaks over pages.
+ % Maybe so, but it also creates really weird page breaks when the table
+ % breaks over pages. Wouldn't \vfil be better? Wait until the problem
+ % manifests itself, so it can be fixed for real --karl.
+ \global\colcount=0\relax}}%
+ %
+ % This preamble sets up a generic column definition, which will
+ % be used as many times as user calls for columns.
+ % \vtop will set a single line and will also let text wrap and
+ % continue for many paragraphs if desired.
+ \halign\bgroup&\global\advance\colcount by 1\relax
+ \multistrut\vtop{\hsize=\expandafter\csname col\the\colcount\endcsname
+ %
+ % In order to keep entries from bumping into each other
+ % we will add a \leftskip of \multitablecolspace to all columns after
+ % the first one.
+ %
+ % If a template has been used, we will add \multitablecolspace
+ % to the width of each template entry.
+ %
+ % If the user has set preamble in terms of percent of \hsize we will
+ % use that dimension as the width of the column, and the \leftskip
+ % will keep entries from bumping into each other. Table will start at
+ % left margin and final column will justify at right margin.
+ %
+ % Make sure we don't inherit \rightskip from the outer environment.
+ \rightskip=0pt
+ \ifnum\colcount=1
+ % The first column will be indented with the surrounding text.
+ \advance\hsize by\leftskip
\else
- % If user has <not> set preamble in terms of percent of \hsize
- % we will advance \hsize by \multitablecolspace
- \advance\hsize by \multitablecolspace
+ \ifsetpercent \else
+ % If user has not set preamble in terms of percent of \hsize
+ % we will advance \hsize by \multitablecolspace.
+ \advance\hsize by \multitablecolspace
+ \fi
+ % In either case we will make \leftskip=\multitablecolspace:
+ \leftskip=\multitablecolspace
\fi
- % In either case we will make \leftskip=\multitablecolspace:
-\leftskip=\multitablecolspace
-\fi
- % Ignoring space at the beginning and end avoids an occasional spurious
- % blank line, when TeX decides to break the line at the space before the
- % box from the multistrut, so the strut ends up on a line by itself.
- % For example:
- % @multitable @columnfractions .11 .89
- % @item @code{#}
- % @tab Legal holiday which is valid in major parts of the whole country.
- % Is automatically provided with highlighting sequences respectively marking
- % characters.
- \noindent\ignorespaces##\unskip\multistrut}\cr
- % \everycr will reset column counter, \colcount, at the end of
- % each line. Every column entry will cause \colcount to advance by one.
- % The table preamble
- % looks at the current \colcount to find the correct column width.
-\global\everycr{\noalign{%
-% \filbreak%% keeps underfull box messages off when table breaks over pages.
-% Maybe so, but it also creates really weird page breaks when the table
-% breaks over pages Wouldn't \vfil be better? Wait until the problem
-% manifests itself, so it can be fixed for real --karl.
-\global\colcount=0\relax}}
+ % Ignoring space at the beginning and end avoids an occasional spurious
+ % blank line, when TeX decides to break the line at the space before the
+ % box from the multistrut, so the strut ends up on a line by itself.
+ % For example:
+ % @multitable @columnfractions .11 .89
+ % @item @code{#}
+ % @tab Legal holiday which is valid in major parts of the whole country.
+ % Is automatically provided with highlighting sequences respectively marking
+ % characters.
+ \noindent\ignorespaces##\unskip\multistrut}\cr
}
-\def\setultitablespacing{% test to see if user has set \multitablelinespace.
+\def\setmultitablespacing{% test to see if user has set \multitablelinespace.
% If so, do nothing. If not, give it an appropriate dimension based on
% current baselineskip.
\ifdim\multitablelinespace=0pt
% the file that accumulates this index. The file's extension is foo.
% The name of an index should be no more than 2 characters long
% for the sake of vms.
-
-\def\newindex #1{
-\expandafter\newwrite \csname#1indfile\endcsname% Define number for output file
-\openout \csname#1indfile\endcsname \jobname.#1 % Open the file
-\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
-\noexpand\doindex {#1}}
+%
+\def\newindex#1{%
+ \iflinks
+ \expandafter\newwrite \csname#1indfile\endcsname
+ \openout \csname#1indfile\endcsname \jobname.#1 % Open the file
+ \fi
+ \expandafter\xdef\csname#1index\endcsname{% % Define @#1index
+ \noexpand\doindex{#1}}
}
% @defindex foo == \newindex{foo}
% Define @defcodeindex, like @defindex except put all entries in @code.
-\def\newcodeindex #1{
-\expandafter\newwrite \csname#1indfile\endcsname% Define number for output file
-\openout \csname#1indfile\endcsname \jobname.#1 % Open the file
-\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
-\noexpand\docodeindex {#1}}
+\def\newcodeindex#1{%
+ \iflinks
+ \expandafter\newwrite \csname#1indfile\endcsname
+ \openout \csname#1indfile\endcsname \jobname.#1
+ \fi
+ \expandafter\xdef\csname#1index\endcsname{%
+ \noexpand\docodeindex{#1}}
}
\def\defcodeindex{\parsearg\newcodeindex}
% @synindex foo bar makes index foo feed into index bar.
% Do this instead of @defindex foo if you don't want it as a separate index.
-\def\synindex #1 #2 {%
-\expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
-\expandafter\let\csname#1indfile\endcsname=\synindexfoo
-\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
-\noexpand\doindex {#2}}%
+% The \closeout helps reduce unnecessary open files; the limit on the
+% Acorn RISC OS is a mere 16 files.
+\def\synindex#1 #2 {%
+ \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
+ \expandafter\closeout\csname#1indfile\endcsname
+ \expandafter\let\csname#1indfile\endcsname=\synindexfoo
+ \expandafter\xdef\csname#1index\endcsname{% define \xxxindex
+ \noexpand\doindex{#2}}%
}
% @syncodeindex foo bar similar, but put all entries made for index foo
% inside @code.
-\def\syncodeindex #1 #2 {%
-\expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
-\expandafter\let\csname#1indfile\endcsname=\synindexfoo
-\expandafter\xdef\csname#1index\endcsname{% % Define \xxxindex
-\noexpand\docodeindex {#2}}%
+\def\syncodeindex#1 #2 {%
+ \expandafter\let\expandafter\synindexfoo\expandafter=\csname#2indfile\endcsname
+ \expandafter\closeout\csname#1indfile\endcsname
+ \expandafter\let\csname#1indfile\endcsname=\synindexfoo
+ \expandafter\xdef\csname#1index\endcsname{% define \xxxindex
+ \noexpand\docodeindex{#2}}%
}
% Define \doindex, the driver for all \fooindex macros.
\def\singlecodeindexer #1{\doind{\indexname}{\code{#1}}}
\def\indexdummies{%
+\def\ { }%
% Take care of the plain tex accent commands.
\def\"{\realbackslash "}%
\def\`{\realbackslash `}%
\def\gtr{\realbackslash gtr}%
\def\less{\realbackslash less}%
\def\hat{\realbackslash hat}%
-%\def\char{\realbackslash char}%
\def\TeX{\realbackslash TeX}%
\def\dots{\realbackslash dots }%
-\def\copyright{\realbackslash copyright }%
+\def\result{\realbackslash result}%
+\def\equiv{\realbackslash equiv}%
+\def\expansion{\realbackslash expansion}%
+\def\print{\realbackslash print}%
+\def\error{\realbackslash error}%
+\def\point{\realbackslash point}%
+\def\copyright{\realbackslash copyright}%
\def\tclose##1{\realbackslash tclose {##1}}%
\def\code##1{\realbackslash code {##1}}%
+\def\uref##1{\realbackslash uref {##1}}%
+\def\url##1{\realbackslash url {##1}}%
+\def\env##1{\realbackslash env {##1}}%
+\def\command##1{\realbackslash command {##1}}%
+\def\option##1{\realbackslash option {##1}}%
\def\dotless##1{\realbackslash dotless {##1}}%
\def\samp##1{\realbackslash samp {##1}}%
\def\,##1{\realbackslash ,{##1}}%
\def\kbd##1{\realbackslash kbd {##1}}%
\def\dfn##1{\realbackslash dfn {##1}}%
\def\emph##1{\realbackslash emph {##1}}%
+\def\acronym##1{\realbackslash acronym {##1}}%
+%
+% Handle some cases of @value -- where the variable name does not
+% contain - or _, and the value does not contain any
+% (non-fully-expandable) commands.
+\let\value = \expandablevalue
+%
\unsepspaces
}
%\let\tt=\indexdummyfont
\let\tclose=\indexdummyfont
\let\code=\indexdummyfont
+\let\url=\indexdummyfont
+\let\uref=\indexdummyfont
+\let\env=\indexdummyfont
+\let\command=\indexdummyfont
+\let\option=\indexdummyfont
\let\file=\indexdummyfont
\let\samp=\indexdummyfont
\let\kbd=\indexdummyfont
% so we do not become unable to do a definition.
{\catcode`\@=0 \catcode`\\=\other
-@gdef@realbackslash{\}}
+ @gdef@realbackslash{\}}
\let\indexbackslash=0 %overridden during \printindex.
+\let\SETmarginindex=\relax % put index entries in margin (undocumented)?
+
+% For \ifx comparisons.
+\def\emptymacro{\empty}
-\let\SETmarginindex=\relax %initialize!
-% workhorse for all \fooindexes
-% #1 is name of index, #2 is stuff to put there
-\def\doind #1#2{%
+% Most index entries go through here, but \dosubind is the general case.
+%
+\def\doind#1#2{\dosubind{#1}{#2}\empty}
+
+% Workhorse for all \fooindexes.
+% #1 is name of index, #2 is stuff to put there, #3 is subentry --
+% \empty if called from \doind, as we usually are. The main exception
+% is with defuns, which call us directly.
+%
+\def\dosubind#1#2#3{%
% Put the index entry in the margin if desired.
\ifx\SETmarginindex\relax\else
\insert\margin{\hbox{\vrule height8pt depth3pt width0pt #2}}%
\indexdummies % Must do this here, since \bf, etc expand at this stage
\escapechar=`\\
{%
- \let\folio=0% We will expand all macros now EXCEPT \folio.
+ \let\folio = 0% We will expand all macros now EXCEPT \folio.
\def\rawbackslashxx{\indexbackslash}% \indexbackslash isn't defined now
% so it will be output as is; and it will print as backslash.
%
+ \def\thirdarg{#3}%
+ %
+ % If third arg is present, precede it with space in sort key.
+ \ifx\thirdarg\emptymacro
+ \let\subentry = \empty
+ \else
+ \def\subentry{ #3}%
+ \fi
+ %
% First process the index-string with all font commands turned off
% to get the string to sort by.
- {\indexnofonts \xdef\indexsorttmp{#2}}%
+ {\indexnofonts \xdef\indexsorttmp{#2\subentry}}%
%
% Now produce the complete index entry, with both the sort key and the
% original text, including any font commands.
\write\csname#1indfile\endcsname{%
\realbackslash entry{\indexsorttmp}{\folio}{\the\toks0}}%
}%
- \temp
+ %
+ % If third (subentry) arg is present, add it to the index string.
+ \ifx\thirdarg\emptymacro \else
+ \toks0 = {#3}%
+ \edef\temp{\temp{\the\toks0}}%
+ \fi
+ %
+ % If a skip is the last thing on the list now, preserve it
+ % by backing up by \lastskip, doing the \write, then inserting
+ % the skip again. Otherwise, the whatsit generated by the
+ % \write will make \lastskip zero. The result is that sequences
+ % like this:
+ % @end defun
+ % @tindex whatever
+ % @defun ...
+ % will have extra space inserted, because the \medbreak in the
+ % start of the @defun won't see the skip inserted by the @end of
+ % the previous defun.
+ \iflinks
+ \skip0 = \lastskip \ifdim\lastskip = 0pt \else \vskip-\lastskip \fi
+ \temp
+ \ifdim\skip0 = 0pt \else \vskip\skip0 \fi
+ \fi
}%
}%
\penalty\count255
}%
}
-\def\dosubind #1#2#3{%
-{\count10=\lastpenalty %
-{\indexdummies % Must do this here, since \bf, etc expand at this stage
-\escapechar=`\\%
-{\let\folio=0%
-\def\rawbackslashxx{\indexbackslash}%
-%
-% Now process the index-string once, with all font commands turned off,
-% to get the string to sort the index by.
-{\indexnofonts
-\xdef\temp1{#2 #3}%
-}%
-% Now produce the complete index entry. We process the index-string again,
-% this time with font commands expanded, to get what to print in the index.
-\edef\temp{%
-\write \csname#1indfile\endcsname{%
-\realbackslash entry {\temp1}{\folio}{#2}{#3}}}%
-\temp }%
-}\penalty\count10}}
-
% The index entry written in the file actually looks like
% \entry {sortstring}{page}{topic}
% or
\indexbreaks
%
% See if the index file exists and is nonempty.
+ % Change catcode of @ here so that if the index file contains
+ % \initial {@}
+ % as its first line, TeX doesn't complain about mismatched braces
+ % (because it thinks @} is a control sequence).
+ \catcode`\@ = 11
\openin 1 \jobname.#1s
\ifeof 1
% \enddoublecolumns gets confused if there is no text in the index,
% to make right now.
\def\indexbackslash{\rawbackslashxx}%
\catcode`\\ = 0
- \catcode`\@ = 11
\escapechar = `\\
\begindoublecolumns
\input \jobname.#1s
\def\print{\realbackslash print}%
\def\TeX{\realbackslash TeX}%
\def\dots{\realbackslash dots}%
+ \def\result{\realbackslash result}%
+ \def\equiv{\realbackslash equiv}%
+ \def\expansion{\realbackslash expansion}%
+ \def\print{\realbackslash print}%
+ \def\error{\realbackslash error}%
+ \def\point{\realbackslash point}%
\def\copyright{\realbackslash copyright}%
\def\tt{\realbackslash tt}%
\def\bf{\realbackslash bf}%
\toks0 = {#1}%
\edef\temp{{\realbackslash chapentry{\the\toks0}{\the\chapno}{\noexpand\folio}}}%
\escapechar=`\\%
-\write \contentsfile \temp %
+\iflinks \write\contentsfile\temp \fi
\donoderef %
\global\let\section = \numberedsec
\global\let\subsection = \numberedsubsec
\edef\temp{{\realbackslash chapentry{\the\toks0}%
{\putwordAppendix{} \appendixletter}{\noexpand\folio}}}%
\escapechar=`\\%
-\write \contentsfile \temp %
+\iflinks \write\contentsfile\temp \fi
\appendixnoderef %
\global\let\section = \appendixsec
\global\let\subsection = \appendixsubsec
\toks0 = {#1}%
\edef\temp{{\realbackslash unnumbchapentry{\the\toks0}{\noexpand\folio}}}%
\escapechar=`\\%
-\write \contentsfile \temp %
+\iflinks \write\contentsfile\temp \fi
\unnumbnoderef %
\global\let\section = \unnumberedsec
\global\let\subsection = \unnumberedsubsec
\edef\temp{{\realbackslash secentry %
{\the\toks0}{\the\chapno}{\the\secno}{\noexpand\folio}}}%
\escapechar=`\\%
-\write \contentsfile \temp %
+\iflinks \write\contentsfile\temp \fi
\donoderef %
\penalty 10000 %
}}
\edef\temp{{\realbackslash secentry %
{\the\toks0}{\appendixletter}{\the\secno}{\noexpand\folio}}}%
\escapechar=`\\%
-\write \contentsfile \temp %
+\iflinks \write\contentsfile\temp \fi
\appendixnoderef %
\penalty 10000 %
}}
\toks0 = {#1}%
\edef\temp{{\realbackslash unnumbsecentry{\the\toks0}{\noexpand\folio}}}%
\escapechar=`\\%
-\write \contentsfile \temp %
+\iflinks \write\contentsfile\temp \fi
\unnumbnoderef %
\penalty 10000 %
}}
\edef\temp{{\realbackslash subsecentry %
{\the\toks0}{\the\chapno}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
\escapechar=`\\%
-\write \contentsfile \temp %
+\iflinks \write\contentsfile\temp \fi
\donoderef %
\penalty 10000 %
}}
\edef\temp{{\realbackslash subsecentry %
{\the\toks0}{\appendixletter}{\the\secno}{\the\subsecno}{\noexpand\folio}}}%
\escapechar=`\\%
-\write \contentsfile \temp %
+\iflinks \write\contentsfile\temp \fi
\appendixnoderef %
\penalty 10000 %
}}
\toks0 = {#1}%
\edef\temp{{\realbackslash unnumbsubsecentry{\the\toks0}{\noexpand\folio}}}%
\escapechar=`\\%
-\write \contentsfile \temp %
+\iflinks \write\contentsfile\temp \fi
\unnumbnoderef %
\penalty 10000 %
}}
{\the\chapno}{\the\secno}{\the\subsecno}{\the\subsubsecno}
{\noexpand\folio}}}%
\escapechar=`\\%
-\write \contentsfile \temp %
+\iflinks \write\contentsfile\temp \fi
\donoderef %
\penalty 10000 %
}}
{\appendixletter}
{\the\secno}{\the\subsecno}{\the\subsubsecno}{\noexpand\folio}}}%
\escapechar=`\\%
-\write \contentsfile \temp %
+\iflinks \write\contentsfile\temp \fi
\appendixnoderef %
\penalty 10000 %
}}
\toks0 = {#1}%
\edef\temp{{\realbackslash unnumbsubsubsecentry{\the\toks0}{\noexpand\folio}}}%
\escapechar=`\\%
-\write \contentsfile \temp %
+\iflinks \write\contentsfile\temp \fi
\unnumbnoderef %
\penalty 10000 %
}}
\unnumbchapmacro{#1}\def\thischapter{}%
\begingroup % Set up to handle contents files properly.
\catcode`\\=0 \catcode`\{=1 \catcode`\}=2 \catcode`\@=11
- \catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
+ % We can't do this, because then an actual ^ in a section
+ % title fails, e.g., @chapter ^ -- exponentiation. --karl, 9jul97.
+ %\catcode`\^=7 % to see ^^e4 as \"a etc. juha@piuha.ydi.vtt.fi
\raggedbottom % Worry more about breakpoints than the bottom.
\advance\hsize by -\contentsrightmargin % Don't use the full line length.
}
% the index entries, but we want to suppress hyphenation here. (We
% can't do that in the \entry macro, since index entries might consist
% of hyphenated-identifiers-that-do-not-fit-on-a-line-and-nothing-else.)
-%
-% \turnoffactive is for the sake of @" used for umlauts.
\def\tocentry#1#2{\begingroup
\vskip 0pt plus1pt % allow a little stretch for the sake of nice page breaks
- \entry{\turnoffactive #1}{\turnoffactive #2}%
+ % Do not use \turnoffactive in these arguments. Since the toc is
+ % typeset in cmr, so characters such as _ would come out wrong; we
+ % have to do the usual translation tricks.
+ \entry{#1}{#2}%
\endgroup}
% Space between chapter (or whatever) number and the title.
% But \@ or @@ will get a plain tex @ character.
\def\tex{\begingroup
-\catcode `\\=0 \catcode `\{=1 \catcode `\}=2
-\catcode `\$=3 \catcode `\&=4 \catcode `\#=6
-\catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie
-\catcode `\%=14
-\catcode 43=12 % plus
-\catcode`\"=12
-\catcode`\==12
-\catcode`\|=12
-\catcode`\<=12
-\catcode`\>=12
-\escapechar=`\\
-%
-\let\,=\ptexcomma
-\let\{=\ptexlbrace
-\let\}=\ptexrbrace
-\let\.=\ptexdot
-\let\*=\ptexstar
-\let\dots=\ptexdots
-\def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
-\def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
-\def\@{@}%
-\let\bullet=\ptexbullet
-\let\b=\ptexb \let\c=\ptexc \let\i=\ptexi \let\t=\ptext
-%
+ \catcode `\\=0 \catcode `\{=1 \catcode `\}=2
+ \catcode `\$=3 \catcode `\&=4 \catcode `\#=6
+ \catcode `\^=7 \catcode `\_=8 \catcode `\~=13 \let~=\tie
+ \catcode `\%=14
+ \catcode 43=12 % plus
+ \catcode`\"=12
+ \catcode`\==12
+ \catcode`\|=12
+ \catcode`\<=12
+ \catcode`\>=12
+ \escapechar=`\\
+ %
+ \let\b=\ptexb
+ \let\bullet=\ptexbullet
+ \let\c=\ptexc
+ \let\,=\ptexcomma
+ \let\.=\ptexdot
+ \let\dots=\ptexdots
+ \let\equiv=\ptexequiv
+ \let\!=\ptexexclam
+ \let\i=\ptexi
+ \let\{=\ptexlbrace
+ \let\+=\tabalign
+ \let\}=\ptexrbrace
+ \let\*=\ptexstar
+ \let\t=\ptext
+ %
+ \def\endldots{\mathinner{\ldots\ldots\ldots\ldots}}%
+ \def\enddots{\relax\ifmmode\endldots\else$\mathsurround=0pt \endldots\,$\fi}%
+ \def\@{@}%
\let\Etex=\endgroup}
% Define @lisp ... @endlisp.
% \nonarrowing is a flag. If "set", @lisp etc don't narrow margins.
\let\nonarrowing=\relax
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% \cartouche: draw rectangle w/rounded corners around argument
+% @cartouche ... @end cartouche: draw rectangle w/rounded corners around
+% environment contents.
\font\circle=lcircle10
\newdimen\circthick
\newdimen\cartouter\newdimen\cartinner
\cartinner=\hsize \advance\cartinner by-\lskip
\advance\cartinner by-\rskip
\cartouter=\hsize
- \advance\cartouter by 18pt % allow for 3pt kerns on either
+ \advance\cartouter by 18.4pt % allow for 3pt kerns on either
% side, and for 6pt waste from
-% each corner char
+% each corner char, and rule thickness
\normbskip=\baselineskip \normpskip=\parskip \normlskip=\lineskip
% Flag to tell @lisp, etc., not to narrow margin.
\let\nonarrowing=\comment
%
\def\nonfillfinish{\afterenvbreak\endgroup}%
-% This macro is
\def\lisp{\begingroup
\nonfillstart
\let\Elisp = \nonfillfinish
\tt
+ % Make @kbd do something special, if requested.
+ \let\kbdfont\kbdexamplefont
\rawbackslash % have \ input char produce \ char from current font
\gobble
}
\catcode 61=\active % 61 is `='
\obeylines\activeparens\spacesplit#3}
-\def\defmethparsebody #1#2#3#4 {\begingroup\inENV %
+% #1 is the \E... control sequence to end the definition (which we define).
+% #2 is the \...x control sequence for consecutive fns (which we define).
+% #3 is the control sequence to call to resume processing.
+% #4, delimited by the space, is the class name.
+%
+\def\defmethparsebody#1#2#3#4 {\begingroup\inENV %
\medbreak %
% Define the end token that this defining construct specifies
% so that it will exit this group.
\exdentamount=\defbodyindent
\begingroup\obeylines\activeparens\spacesplit{#3{#4}}}
+% @deftypemethod has an extra argument that nothing else does. Sigh.
+% #1 is the \E... control sequence to end the definition (which we define).
+% #2 is the \...x control sequence for consecutive fns (which we define).
+% #3 is the control sequence to call to resume processing.
+% #4, delimited by the space, is the class name.
+% #5 is the method's return type.
+%
+\def\deftypemethparsebody#1#2#3#4 #5 {\begingroup\inENV %
+\medbreak %
+% Define the end token that this defining construct specifies
+% so that it will exit this group.
+\def#1{\endgraf\endgroup\medbreak}%
+\def#2##1 ##2 {\begingroup\obeylines\activeparens\spacesplit{#3{##1}{##2}}}%
+\parindent=0in
+\advance\leftskip by \defbodyindent \advance \rightskip by \defbodyindent
+\exdentamount=\defbodyindent
+\begingroup\obeylines\activeparens\spacesplit{#3{#4}{#5}}}
+
\def\defopparsebody #1#2#3#4#5 {\begingroup\inENV %
\medbreak %
% Define the end token that this defining construct specifies
\def\defspecx #1 {\errmessage{@defspecx in invalid context}}
\def\deftypefnx #1 {\errmessage{@deftypefnx in invalid context}}
\def\deftypemethodx #1 {\errmessage{@deftypemethodx in invalid context}}
-\def\deftypeunx #1 {\errmessage{@deftypeunx in invalid context}}
+\def\deftypefunx #1 {\errmessage{@deftypeunx in invalid context}}
% @defmethod, and so on
-% @defop {Funny Method} foo-class frobnicate argument
+% @defop CATEGORY CLASS OPERATION ARG...
\def\defop #1 {\def\defoptype{#1}%
\defopparsebody\Edefop\defopx\defopheader\defoptype}
\def\defopheader #1#2#3{%
-\dosubind {fn}{\code{#2}}{on #1}% Make entry in function index
+\dosubind {fn}{\code{#2}}{\putwordon\ #1}% Make entry in function index
\begingroup\defname {#2}{\defoptype{} on #1}%
\defunargs {#3}\endgroup %
}
-% @deftypemethod foo-class return-type foo-method args
+% @deftypemethod CLASS RETURN-TYPE METHOD ARG...
%
\def\deftypemethod{%
- \defmethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader}
+ \deftypemethparsebody\Edeftypemethod\deftypemethodx\deftypemethodheader}
%
% #1 is the class name, #2 the data type, #3 the method name, #4 the args.
\def\deftypemethodheader#1#2#3#4{%
- \deftypefnheaderx{Method on #1}{#2}#3 #4\relax
+ \dosubind{fn}{\code{#3}}{\putwordon\ \code{#1}}% entry in function index
+ \begingroup
+ \defname{\defheaderxcond#2\relax$$$#3}{\putwordMethodon\ \code{#1}}%
+ \deftypefunargs{#4}%
+ \endgroup
}
% @defmethod == @defop Method
-
+%
\def\defmethod{\defmethparsebody\Edefmethod\defmethodx\defmethodheader}
-
-\def\defmethodheader #1#2#3{%
-\dosubind {fn}{\code{#2}}{on #1}% entry in function index
-\begingroup\defname {#2}{Method on #1}%
-\defunargs {#3}\endgroup %
+%
+% #1 is the class name, #2 the method name, #3 the args.
+\def\defmethodheader#1#2#3{%
+ \dosubind{fn}{\code{#2}}{\putwordon\ \code{#1}}% entry in function index
+ \begingroup
+ \defname{#2}{\putwordMethodon\ \code{#1}}%
+ \defunargs{#3}%
+ \endgroup
}
% @defcv {Class Option} foo-class foo-flag
\def\deftpx #1 {\errmessage{@deftpx in invalid context}}
-\message{cross reference,}
-% Define cross-reference macros
-\newwrite \auxfile
+\message{macros,}
+% @macro.
+
+% To do this right we need a feature of e-TeX, \scantokens,
+% which we arrange to emulate with a temporary file in ordinary TeX.
+\ifx\eTeXversion\undefined
+ \newwrite\macscribble
+ \def\scantokens#1{%
+% \toks0={#1}%
+ \immediate\openout\macscribble=\jobname.tmp
+ \immediate\write\macscribble{#1}%\the\toks0}%
+ \immediate\closeout\macscribble
+ \input \jobname.tmp
+}
+\fi
+
+\newcount\paramno % Count of parameters
+\newtoks\macname % Macro name
+\newif\ifrecursive % Is it recursive?
+
+% Utility: does \let #1 = #2, except with \csnames.
+\def\cslet#1#2{%
+\expandafter\expandafter
+\expandafter\let
+\expandafter\expandafter
+\csname#1\endcsname
+\csname#2\endcsname}
+
+% Macro bodies are absorbed as an argument in a context where
+% all characters are catcode 10, 11 or 12, except \ which is active
+% (as in normal texinfo). It is necessary to change the definition of \.
+
+\def\macrobodyctxt{%
+ \catcode`\~=12
+ \catcode`\^=12
+ \catcode`\_=12
+ \catcode`\|=12
+ \catcode`\<=12
+ \catcode`\>=12
+ \catcode`\+=12
+ \catcode`\{=12
+ \catcode`\}=12
+ \catcode`\@=12
+ \catcode`\^^M=10
+ \usembodybackslash}
+
+% \mbodybackslash is the definition of \ in @macro bodies.
+% It maps \foo\ => \csname macarg.foo\endcsname => #N
+% where N is the macro parameter number.
+% We define \csname macarg.\endcsname to be \realbackslash, so
+% \\ in macro replacement text gets you a backslash.
+
+{\catcode`@=0 \catcode`\\=\active
+ @gdef@usembodybackslash{@let\=@mbodybackslash}
+ @gdef@mbodybackslash#1\{@csname macarg.#1@endcsname}
+}
+\expandafter\def\csname macarg.\endcsname{\realbackslash}
+
+% The catcode games are necessary because @macro may or may not
+% have a brace-surrounded list of arguments, and we need to do
+% different stuff in each case. Making {, } \other is the only
+% way to prevent their being deleted by the tokenizer.
+\def\macro{\recursivefalse
+ \bgroup\catcode`\{=\other\catcode`\}=\other\parsearg\macroxxx}
+\def\rmacro{\recursivetrue
+ \bgroup\catcode`\{=\other\catcode`\}=\other\parsearg\macroxxx}
+
+\def\macroxxx#1{\egroup % started in \macro
+ \getargs{#1}% now \macname is the macname and \toks0 the arglist
+ \edef\temp{\the\toks0}%
+ \ifx\temp\empty % no arguments
+ \paramno=0%
+ \else
+ \expandafter\parsemargdef \the\toks0;%
+ \fi
+ \expandafter\ifx \csname macsave.\the\macname\endcsname \relax
+ \cslet{macsave.\the\macname}{\the\macname}%
+ \else
+ \message{Warning: redefining \the\macname}%
+ \fi
+ \begingroup \macrobodyctxt
+ \ifrecursive \expandafter\parsermacbody
+ \else \expandafter\parsemacbody
+ \fi}
+
+\def\unmacro{\parsearg\unmacroxxx}
+\def\unmacroxxx#1{
+ \expandafter\ifx \csname macsave.\the\macname\endcsname \relax
+ \errmessage{Macro \the\macname\ not defined.}%
+ \else
+ \cslet{#1}{macsave.#1}%
+ \expandafter\let \csname macsave.\the\macname\endcsname \undefined
+ \fi
+}
+
+% Parse the optional {params} list. Set up \paramno and \paramlist
+% so \defmacro knows what to do. Define \macarg.blah for each blah
+% in the params list, to be ##N where N is the position in that list.
+% That gets used by \mbodybackslash (above).
+
+% This code has to take great care with `macro parameter char #'. The
+% eight hashes in a row on the macarg.#1 line collapse to four in the
+% definition of \macarg.blah, to two when \parsemacbody expands the
+% macro replacement text, and to one when \defmacro writes the macro
+% definiton. The games with \twohash are to postpone expansion till
+% the very end, when \parsemargdefyyy crunches \paramlist into
+% something that can be splatted into a \expandafter\def\blah line (in
+% \defmacro).
+\def\parsemargdef#1;{\paramno=0\def\paramlist{}\parsemargdefxxx#1,;,}
+\def\parsemargdefxxx#1,{%
+ \let\twohash\relax
+ \if#1;\let\next=\parsemargdefyyy
+ \else \let\next=\parsemargdefxxx
+ \advance\paramno by 1%
+ \expandafter\edef\csname macarg.#1\endcsname{########\the\paramno}%
+ \edef\paramlist{\paramlist\twohash\twohash\the\paramno,}%
+ \fi\next}
+\def\parsemargdefyyy{\let\twohash##\relax \edef\paramlist{\paramlist}}
+
+% These two commands read recursive and nonrecursive macro bodies.
+% (They're different since rec and nonrec macros end differently.)
+
+\long\def\parsemacbody#1@end macro%
+{\xdef\temp{#1} \endgroup\defmacro}%
+\long\def\parsermacbody#1@end macro%
+{\xdef\temp{#1} \endgroup\defmacro}%
+
+
+% This defines the macro itself. There are six cases: recursive and
+% nonrecursive macros of zero, one, and many arguments.
+% Much magic with \expandafter here.
+\def\defmacro{%
+ \ifrecursive
+ \ifcase\paramno
+ % 0
+ \expandafter\edef\csname\the\macname\endcsname{%
+ \noexpand\scantokens{\temp}}%
+ \or % 1
+ \expandafter\edef\csname\the\macname\endcsname{%
+ \noexpand\braceorline\csname\the\macname xxx\endcsname}%
+ \expandafter\edef\csname\the\macname xxx\endcsname##1{%
+ \noexpand\scantokens{\temp}}%
+ \else % many
+ \expandafter\edef\csname\the\macname\endcsname##1{%
+ \csname\the\macname xxx\endcsname ##1,}%
+ \expandafter\expandafter
+ \expandafter\edef
+ \expandafter\expandafter
+ \csname\the\macname xxx\endcsname
+ \paramlist{\noexpand\scantokens{\temp}}%
+ \fi
+ \else
+ \ifcase\paramno
+ % 0
+ \expandafter\edef\csname\the\macname\endcsname{%
+ \noexpand\norecurse{\the\macname}%
+ \noexpand\scantokens{\temp}\egroup}%
+ \or % 1
+ \expandafter\edef\csname\the\macname\endcsname{%
+ \noexpand\braceorline\csname\the\macname xxx\endcsname}%
+ \expandafter\edef\csname\the\macname xxx\endcsname##1{%
+ \noexpand\norecurse{\the\macname}
+ \noexpand\scantokens{\temp}\egroup}%
+ \else % many
+ \expandafter\edef\csname\the\macname\endcsname##1{%
+ \csname\the\macname xxx\endcsname ##1,}%
+ \expandafter\expandafter
+ \expandafter\edef
+ \expandafter\expandafter
+ \csname\the\macname xxx\endcsname
+ \paramlist{%
+ \noexpand\norecurse{\the\macname}
+ \noexpand\scantokens{\temp}\egroup}%
+ \fi
+ \fi}
+
+\def\norecurse#1{\bgroup\cslet{#1}{macsave.#1}}
+
+% \braceorline decides whether the next nonwhitespace character is a
+% {. If so it reads up to the closing }, if not, it reads the whole
+% line. Whatever was read is then fed to the next control sequence
+% as an argument (by \parsebrace or \parsearg)
+\def\braceorline#1{\let\next=#1\futurelet\nchar\braceorlinexxx}
+\def\braceorlinexxx{%
+ \ifx\nchar\bgroup\else
+ \expandafter\parsearg
+ \fi \next}
+
+% We need {} to be \other inside these commands. [] are temporary
+% grouping symbols.
+\begingroup
+\catcode`\{=\other \catcode`\}=\other
+\catcode`\[=1 \catcode`\]=2
+
+% @macro can be called with or without a brace-surrounded macro
+% argument list. These three sequences extract the macro name and arg
+% list in hopefully all cases. Note that anything on the line after the
+% first pair of braces will be thrown out (Makeinfo puts it into the
+% macro body).
+\gdef\getargs#1[\getargsxxx|#1 {}|]
+\gdef\getargsxxx|#1 {#2}#3|[%
+ \toks0=[#2]%
+ \edef\tmp[\the\toks0]%
+ \ifx\tmp\empty
+ \getargsnospaces|#1{}|%
+ \else
+ \macname=[#1]%
+ \fi]
+\gdef\getargsnospaces|#1{#2}#3|[\macname=[#1]\toks0=[#2]]
+
+\endgroup
-\newif\ifhavexrefs % True if xref values are known.
+
+\message{cross references,}
+\newwrite\auxfile
+
+\newif\ifhavexrefs % True if xref values are known.
\newif\ifwarnedxrefs % True if we warned once that they aren't known.
-% @inforef is simple.
+% @inforef is relatively simple.
\def\inforef #1{\inforefzzz #1,,,,**}
\def\inforefzzz #1,#2,#3,#4**{\putwordSee{} \putwordInfo{} \putwordfile{} \file{\ignorespaces #3{}},
node \samp{\ignorespaces#1{}}}
-% \setref{foo} defines a cross-reference point named foo.
+% @setref{foo} defines a cross-reference point named foo.
\def\setref#1{%
\dosetq{#1-title}{Ytitle}%
% into the usual \leavevmode...\vrule stuff for purposes of
% printing. So we \turnoffactive for the \refx-snt, back on for the
% printing, back off for the \refx-pg.
- {\turnoffactive \refx{#1-snt}{}}%
+ {\normalturnoffactive \refx{#1-snt}{}}%
\space [\printednodename],\space
\turnoffactive \putwordpage\tie\refx{#1-pg}{}%
\fi
% \dosetq is the interface for calls from other macros
-% Use \turnoffactive so that punctuation chars such as underscore
-% work in node names.
-\def\dosetq #1#2{{\let\folio=0 \turnoffactive
-\edef\next{\write\auxfile{\internalsetq {#1}{#2}}}%
-\next}}
+% Use \normalturnoffactive so that punctuation chars such as underscore
+% and backslash work in node names. (\turnoffactive doesn't do \.)
+\def\dosetq#1#2{%
+ {\let\folio=0
+ \normalturnoffactive
+ \edef\next{\write\auxfile{\internalsetq{#1}{#2}}}%
+ \iflinks
+ \next
+ \fi
+ }%
+}
% \internalsetq {foo}{page} expands into
% CHARACTERS 'xrdef {foo}{...expansion of \Ypage...}
\def\refx#1#2{%
\expandafter\ifx\csname X#1\endcsname\relax
% If not defined, say something at least.
- $\langle$un\-de\-fined$\rangle$%
- \ifhavexrefs
- \message{\linenumber Undefined cross reference `#1'.}%
- \else
- \ifwarnedxrefs\else
- \global\warnedxrefstrue
- \message{Cross reference values unknown; you must run TeX again.}%
+ \angleleft un\-de\-fined\angleright
+ \iflinks
+ \ifhavexrefs
+ \message{\linenumber Undefined cross reference `#1'.}%
+ \else
+ \ifwarnedxrefs\else
+ \global\warnedxrefstrue
+ \message{Cross reference values unknown; you must run TeX again.}%
+ \fi
\fi
\fi
\else
}
% This is the macro invoked by entries in the aux file.
-\def\xrdef #1#2{{%
- \catcode`\'=\other
- \expandafter\gdef\csname X#1\endcsname{#2}%
-}}
+%
+\def\xrdef#1{\begingroup
+ % Reenable \ as an escape while reading the second argument.
+ \catcode`\\ = 0
+ \afterassignment\endgroup
+ \expandafter\gdef\csname X#1\endcsname
+}
% Read the last existing aux file, if any. No error if none exists.
\def\readauxfile{\begingroup
\catcode`\^^@=\other
- \catcode`\\ 1=\other
- \catcode`\\ 2=\other
+ \catcode`\^^A=\other
+ \catcode`\^^B=\other
\catcode`\^^C=\other
\catcode`\^^D=\other
\catcode`\^^E=\other
\catcode`\^^F=\other
\catcode`\^^G=\other
\catcode`\^^H=\other
- \catcode`\\v=\other
+ \catcode`\^^K=\other
\catcode`\^^L=\other
- \catcode`\\ e=\other
- \catcode`\\ f=\other
- \catcode`\\10=\other
- \catcode`\\11=\other
- \catcode`\\12=\other
- \catcode`\\13=\other
- \catcode`\\14=\other
- \catcode`\\15=\other
- \catcode`\\16=\other
- \catcode`\\17=\other
- \catcode`\\18=\other
- \catcode`\\19=\other
- \catcode26=\other
+ \catcode`\^^N=\other
+ \catcode`\^^P=\other
+ \catcode`\^^Q=\other
+ \catcode`\^^R=\other
+ \catcode`\^^S=\other
+ \catcode`\^^T=\other
+ \catcode`\^^U=\other
+ \catcode`\^^V=\other
+ \catcode`\^^W=\other
+ \catcode`\^^X=\other
+ \catcode`\^^Z=\other
\catcode`\^^[=\other
\catcode`\^^\=\other
\catcode`\^^]=\other
\catcode`\$=\other
\catcode`\#=\other
\catcode`\&=\other
- % `\+ does not work, so use 43.
- \catcode43=\other
+ \catcode`+=\other % avoid \+ for paranoia even though we've turned it off
% Make the characters 128-255 be printing characters
{%
\count 1=128
% space to prevent strange expansion errors.)
\def\supereject{\par\penalty -20000\footnoteno =0 }
-% @footnotestyle is meaningful for info output only..
+% @footnotestyle is meaningful for info output only.
\let\footnotestyle=\comment
\let\ptexfootnote=\footnote
%
\def\finalout{\overfullrule=0pt}
-
-% End of control word definitions.
-
-\message{and turning on texinfo input format.}
-
-\def\openindices{%
- \newindex{cp}%
- \newcodeindex{fn}%
- \newcodeindex{vr}%
- \newcodeindex{tp}%
- \newcodeindex{ky}%
- \newcodeindex{pg}%
+% @image. We use the macros from epsf.tex to support this.
+% If epsf.tex is not installed and @image is used, we complain.
+%
+% Check for and read epsf.tex up front. If we read it only at @image
+% time, we might be inside a group, and then its definitions would get
+% undone and the next image would fail.
+\openin 1 = epsf.tex
+\ifeof 1 \else
+ \closein 1
+ % Do not bother showing banner with post-v2.7 epsf.tex (available in
+ % doc/epsf.tex until it shows up on ctan).
+ \def\epsfannounce{\toks0 = }%
+ \input epsf.tex
+\fi
+%
+\newif\ifwarnednoepsf
+\newhelp\noepsfhelp{epsf.tex must be installed for images to
+ work. It is also included in the Texinfo distribution, or you can get
+ it from ftp://ftp.tug.org/tex/epsf.tex.}
+%
+% Only complain once about lack of epsf.tex.
+\def\image#1{%
+ \ifx\epsfbox\undefined
+ \ifwarnednoepsf \else
+ \errhelp = \noepsfhelp
+ \errmessage{epsf.tex not found, images will be ignored}%
+ \global\warnednoepsftrue
+ \fi
+ \else
+ \imagexxx #1,,,\finish
+ \fi
}
+%
+% Arguments to @image:
+% #1 is (mandatory) image filename; we tack on .eps extension.
+% #2 is (optional) width, #3 is (optional) height.
+% #4 is just the usual extra ignored arg for parsing this stuff.
+\def\imagexxx#1,#2,#3,#4\finish{%
+ % \epsfbox itself resets \epsf?size at each figure.
+ \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \epsfxsize=#2\relax \fi
+ \setbox0 = \hbox{\ignorespaces #3}\ifdim\wd0 > 0pt \epsfysize=#3\relax \fi
+ % If the image is by itself, center it.
+ \ifvmode
+ \centerline{\epsfbox{#1.eps}}%
+ \else
+ \epsfbox{#1.eps}%
+ \fi
+}
+
-% Set some numeric style parameters, for 8.5 x 11 format.
+\message{paper sizes,}
+% And other related parameters.
-\hsize = 6in
-\hoffset = .25in
\newdimen\defaultparindent \defaultparindent = 15pt
-\parindent = \defaultparindent
-\parskip 3pt plus 2pt minus 1pt
-\setleading{13.2pt}
-\advance\topskip by 1.2cm
\chapheadingskip = 15pt plus 4pt minus 2pt
\secheadingskip = 12pt plus 3pt minus 2pt
\subsecheadingskip = 9pt plus 2pt minus 2pt
% Prevent underfull vbox error messages.
-\vbadness=10000
+\vbadness = 10000
% Following George Bush, just get rid of widows and orphans.
\widowpenalty=10000
% Use TeX 3.0's \emergencystretch to help line breaking, but if we're
% using an old version of TeX, don't do anything. We want the amount of
% stretch added to depend on the line length, hence the dependence on
-% \hsize. This makes it come to about 9pt for the 8.5x11 format.
+% \hsize. This makes it come to about 9pt for the 8.5x11 format. We
+% call this whenever the paper size is set.
%
-\ifx\emergencystretch\thisisundefined
- % Allow us to assign to \emergencystretch anyway.
- \def\emergencystretch{\dimen0}%
-\else
- \emergencystretch = \hsize
- \divide\emergencystretch by 45
-\fi
+\def\setemergencystretch{%
+ \ifx\emergencystretch\thisisundefined
+ % Allow us to assign to \emergencystretch anyway.
+ \def\emergencystretch{\dimen0}%
+ \else
+ \emergencystretch = \hsize
+ \divide\emergencystretch by 45
+ \fi
+}
-% Use @smallbook to reset parameters for 7x9.5 format (or else 7x9.25)
-\def\smallbook{
- \global\chapheadingskip = 15pt plus 4pt minus 2pt
- \global\secheadingskip = 12pt plus 3pt minus 2pt
- \global\subsecheadingskip = 9pt plus 2pt minus 2pt
+% Parameters in order: 1) textheight; 2) textwidth; 3) voffset;
+% 4) hoffset; 5) binding offset; 6) topskip. Then whoever calls us can
+% set \parskip and call \setleading for \baselineskip.
+%
+\def\internalpagesizes#1#2#3#4#5#6{%
+ \voffset = #3\relax
+ \topskip = #6\relax
+ \splittopskip = \topskip
%
- \global\lispnarrowing = 0.3in
- \setleading{12pt}
- \advance\topskip by -1cm
- \global\parskip 2pt plus 1pt
- \global\hsize = 5in
- \global\vsize=7.5in
- \global\tolerance=700
- \global\hfuzz=1pt
- \global\contentsrightmargin=0pt
- \global\deftypemargin=0pt
- \global\defbodyindent=.5cm
+ \vsize = #1\relax
+ \advance\vsize by \topskip
+ \outervsize = \vsize
+ \advance\outervsize by 2\topandbottommargin
+ \pageheight = \vsize
%
- \global\pagewidth=\hsize
- \global\pageheight=\vsize
+ \hsize = #2\relax
+ \outerhsize = \hsize
+ \advance\outerhsize by 0.5in
+ \pagewidth = \hsize
%
- \global\let\smalllisp=\smalllispx
- \global\let\smallexample=\smalllispx
- \global\def\Esmallexample{\Esmalllisp}
+ \normaloffset = #4\relax
+ \bindingoffset = #5\relax
+ %
+ \parindent = \defaultparindent
+ \setemergencystretch
}
-% Use @afourpaper to print on European A4 paper.
-\def\afourpaper{
-\global\tolerance=700
-\global\hfuzz=1pt
-\setleading{12pt}
-\global\parskip 15pt plus 1pt
-
-\global\vsize= 53\baselineskip
-\advance\vsize by \topskip
-%\global\hsize= 5.85in % A4 wide 10pt
-\global\hsize= 6.5in
-\global\outerhsize=\hsize
-\global\advance\outerhsize by 0.5in
-\global\outervsize=\vsize
-\global\advance\outervsize by 0.6in
-
-\global\pagewidth=\hsize
-\global\pageheight=\vsize
-}
+% @letterpaper (the default).
+\def\letterpaper{{\globaldefs = 1
+ \parskip = 3pt plus 2pt minus 1pt
+ \setleading{13.2pt}%
+ %
+ % If page is nothing but text, make it come out even.
+ \internalpagesizes{46\baselineskip}{6in}{\voffset}{.25in}{\bindingoffset}{36pt}%
+}}
-\bindingoffset=0pt
-\normaloffset=\hoffset
-\pagewidth=\hsize
-\pageheight=\vsize
-
-% Allow control of the text dimensions. Parameters in order: textheight;
-% textwidth; voffset; hoffset; binding offset; topskip.
-% All require a dimension;
-% header is additional; added length extends the bottom of the page.
-
-\def\changepagesizes#1#2#3#4#5#6{
- \global\vsize= #1
- \global\topskip= #6
- \advance\vsize by \topskip
- \global\voffset= #3
- \global\hsize= #2
- \global\outerhsize=\hsize
- \global\advance\outerhsize by 0.5in
- \global\outervsize=\vsize
- \global\advance\outervsize by 0.6in
- \global\pagewidth=\hsize
- \global\pageheight=\vsize
- \global\normaloffset= #4
- \global\bindingoffset= #5}
+% Use @smallbook to reset parameters for 7x9.5 (or so) format.
+\def\smallbook{{\globaldefs = 1
+ \parskip = 2pt plus 1pt
+ \setleading{12pt}%
+ %
+ \internalpagesizes{7.5in}{5.in}{\voffset}{.25in}{\bindingoffset}{16pt}%
+ %
+ \lispnarrowing = 0.3in
+ \tolerance = 700
+ \hfuzz = 1pt
+ \contentsrightmargin = 0pt
+ \deftypemargin = 0pt
+ \defbodyindent = .5cm
+ %
+ \let\smalllisp = \smalllispx
+ \let\smallexample = \smalllispx
+ \def\Esmallexample{\Esmalllisp}%
+}}
+
+% Use @afourpaper to print on European A4 paper.
+\def\afourpaper{{\globaldefs = 1
+ \setleading{12pt}%
+ \parskip = 3pt plus 2pt minus 1pt
+ %
+ \internalpagesizes{53\baselineskip}{6.5in}{\voffset}{.25in}{\bindingoffset}{44pt}%
+ %
+ \tolerance = 700
+ \hfuzz = 1pt
+}}
% A specific text layout, 24x15cm overall, intended for A4 paper. Top margin
% 29mm, hence bottom margin 28mm, nominal side margin 3cm.
-\def\afourlatex
- {\global\tolerance=700
- \global\hfuzz=1pt
- \setleading{12pt}
- \global\parskip 15pt plus 1pt
- \advance\baselineskip by 1.6pt
- \changepagesizes{237mm}{150mm}{3.6mm}{3.6mm}{3mm}{7mm}
- }
+\def\afourlatex{{\globaldefs = 1
+ \setleading{13.6pt}%
+ %
+ \afourpaper
+ \internalpagesizes{237mm}{150mm}{3.6mm}{3.6mm}{3mm}{7mm}%
+ %
+ \globaldefs = 0
+}}
% Use @afourwide to print on European A4 paper in wide format.
-\def\afourwide{\afourpaper
-\changepagesizes{9.5in}{6.5in}{\hoffset}{\normaloffset}{\bindingoffset}{7mm}}
+\def\afourwide{%
+ \afourpaper
+ \internalpagesizes{9.5in}{6.5in}{\hoffset}{\normaloffset}{\bindingoffset}{7mm}%
+ %
+ \globaldefs = 0
+}
+
+% @pagesizes TEXTHEIGHT[,TEXTWIDTH]
+% Perhaps we should allow setting the margins, \topskip, \parskip,
+% and/or leading, also. Or perhaps we should compute them somehow.
+%
+\def\pagesizes{\parsearg\pagesizesxxx}
+\def\pagesizesxxx#1{\pagesizesyyy #1,,\finish}
+\def\pagesizesyyy#1,#2,#3\finish{{%
+ \setbox0 = \hbox{\ignorespaces #2}\ifdim\wd0 > 0pt \hsize=#2\relax \fi
+ \globaldefs = 1
+ %
+ \parskip = 3pt plus 2pt minus 1pt
+ \setleading{13.2pt}%
+ %
+ \internalpagesizes{#1}{\hsize}{\voffset}{\normaloffset}{\bindingoffset}{44pt}%
+}}
+
+% Set default to letter.
+%
+\letterpaper
+
+\message{and turning on texinfo input format.}
% Define macros to output various characters with catcode for normal text.
\catcode`\"=\other
% use math or other variants that look better in normal text.
\catcode`\"=\active
-\def\activedoublequote{{\tt \char '042}}
+\def\activedoublequote{{\tt\char34}}
\let"=\activedoublequote
\catcode`\~=\active
-\def~{{\tt \char '176}}
+\def~{{\tt\char126}}
\chardef\hat=`\^
\catcode`\^=\active
\def^{{\tt \hat}}
\def\_{\leavevmode \kern.06em \vbox{\hrule width.3em height.1ex}}
\catcode`\|=\active
-\def|{{\tt \char '174}}
+\def|{{\tt\char124}}
\chardef \less=`\<
\catcode`\<=\active
\def<{{\tt \less}}
@gdef@fixbackslash{@ifx\@eatinput @let\ = @normalbackslash @fi
@catcode`+=@active @catcode`@_=@active}
-%% These look ok in all fonts, so just make them not special. The @rm below
-%% makes sure that the current font starts out as the newly loaded cmr10
+% These look ok in all fonts, so just make them not special. The @rm below
+% makes sure that the current font starts out as the newly loaded cmr10
@catcode`@$=@other @catcode`@%=@other @catcode`@&=@other @catcode`@#=@other
@textfonts
@rm
@c Local variables:
+@c eval: (add-hook 'write-file-hooks 'time-stamp)
@c page-delimiter: "^\\\\message"
+@c time-stamp-start: "def\\\\texinfoversion{"
+@c time-stamp-format: "%:y-%02m-%02d"
+@c time-stamp-end: "}"
@c End:
OSDN Git Service
